Nagar Panchayat - Jharkhand
37960330 tender for supply of pipe socket, cap, master cylinder, water tank, third plate, cp rod, master cylinder cap, pipe winch, ring winch, plus, pvc pipe, nipple, pipe clamp, m seal....
1
winch Tenders in Jharkhand
2
Bharat Coking Coal Limited - Jharkhand
37954977 dismantling old tippler shed structure at 1 pit and changing /repairing existing shed structure and changing damaged cgi sheet of 1 pit top shed (submersible pump shed ) for safety point of view and changing damaged sheet of power winch shed at 1 pit...
3
South Eastern Railways - Jharkhand
37915521 auction sale of srl no [1] lot no. cetrd 0223024, desc released & u/s scrap g.i erw steel tube diff. size, ledger ref ohe/rl/8/172, qty. in nos./mtrs./wt. 2915.5 mtrs (8717.619 kg) approx wt 8.718 mt [ ferrous full]. srl no [2] lot no. cetrd 0223024, desc released & u/s scrap gi misc. ferrous scrap, ledger ref ohe/rl/8/174, qty. in nos./mtrs./wt. 7500 kgs approx wt 7.5 mt [ ferrous full,]. srl no [03.] lot no. cetrd 0223024, desc released & u/s scrap number plate., ledger ref ohe/rl/8/148, qty. in nos./mtrs./wt. 333 nos (333 kgs) approx wt 0.333 mt [ ferrous full], . srl no [04.] lot no. cetrd 0223024, desc released & u/s scrap misc ferrous(of rail & road vehicle), ledger ref sv/r/8/220, qty. in nos./mtrs./wt. 900 kgs. approx wt 0.9 mt [ ferrous full] srl no [05.]lot no. cetrd 0223024, desc released & u/s guy rods dia 25 mm., ledger ref ohe/rl/8/129, qty. in nos./mtrs./wt. 08 nos(72 mtrs) approx wt 0.292 mt [ ferrous full], . srl no [06.]lot no. cetrd 0223024, desc released & u/s s.s.rope., ledger ref ohe/rl/8/171, qty. in nos./mtrs./wt. 63 nos (137kgs.) approx wt 0.137 mt [ ferrous full], . srl no [07.]lot no. cetrd 0223024, desc released & u/s scrap earth rod cable , ledger ref ohe/rl/8/178, qty. in nos./mtrs./wt. 08 nos approx wt 0.013 mt [ non fe 13 kgs. copper], . srl no [8] lot no. cetrd 0223024, desc released & u/s scrap alluminium., ledger ref ohe/rl/8/175, qty. in nos./mtrs./wt. 185 kgs. approx wt 0.185 mt [ferrous nil non fe full alluminium], . srl no [09.]lot no. cetrd 0223024, desc released & u/s 3 pulley& winch type atd, ledger ref ohe/rl/8/165, qty. in nos./mtrs./wt. 31 sets (558 kgs) approx wt 0.558 mt [ ferrous 372kgs.non fe 186 kgs.alluminium] , . srl no [10]lot no. cetrd 0223024, desc released & u/s scrap steady arm (all.), ledger ref ohe/rl/8/157, qty. in nos./mtrs./wt. 302 nos. (450 kgs.) approx wt 0.45 mt [ ferrous 249 kgs.non fe 201 kgs.alluminium], srl no [11.]lot no. cetrd 0223024, desc released & u/s scrap 5 pully atd complete., ledger ref ohe/rl/8/153, qty. in nos./mtrs./wt. 34 nos.(612 kgs.) approx wt 0.612 mt [ ferrous 211 kgs non fe 170 kgs. & 231 kgs.aluminium & all. bronze], . srl no [12]lot no. cetrd 0223024, desc released & u/s scrap insulated catenary wire, ledger ref ohe/rl/8/144, qty. in nos./mtrs./wt. 35.6 mtrs. (51 kg) approx wt 0.021 mt [ ferrous 30 kg (insulated material)non fe 21 kgs.copper], srl no [13]lot no. cetrd 0223024, desc released & u/s scrap different type insulator, ledger ref ohe/rl/8/116, qty. in nos./mtrs./wt. 49 nos. (147kg) approx wt 0.147 mt [ ferrous full], . srl no [14]lot no. cetrd 0223024, desc released & u/s scrap different size busbar, ledger ref psi/rl/1/55a, qty. in nos./mtrs./wt. 225 mtrs (254kgs) approx wt 0.254 mt [ ferrous nil non fe full alluminium], . srl no [15.]lot no. cetrd 0223024, desc released u/s & scrap 24 volt self starter, ledger ref sv/r/8/222, qty. in nos./mtrs./wt. 01 no.(28kgs) approx wt 0.028 mt [ ferrous 24 kgs.non fe 04 kgscopper], . srl no [16.]lot no. cetrd 0223024, desc released & u/s scrap cable., ledger ref sv/r/8/216, qty. in nos./mtrs./wt. 1825 mtrs. (29.2kgs) approx wt 0.007 mt [ ferrous 22 kg (insulated material)non fe 07 kgscopper], srl no [17.]lot no. cetrd 0223024, desc released u/s & scrap radiator assembly., ledger ref sv/r/8/213, qty. in nos./mtrs./wt. 03 nos. (109 kgs) approx wt 0.109 mt [ ferrous 87 kgs non fe 19 kgs copper 03 kgs brass], . srl no [18.]lot no. cetrd 0223024, desc released & u/s misc. items as per annexure 1 attached with lot (sl. no. 01 to 37), ledger ref tp/rl/01,ds/8,tp/12, qty. in nos./mtrs./wt. 101 nos + 03 set (1092.47 kg) approx wt 1.092 mt [ ferrous 879.27 kgs, non fe alu.= 1.450,brass=0.700,cu=0.600,wooden=24.600,fibre=185.850,...
4
Indian Army - Jharkhand
37900406 bids are invited for fd ae cable way 100 mtr ms angle , ms flat bar , steel roll formed , mild steel hinged clamp , clamp , snatch block , mudsill clamp , roller , hauling cable , swr cable , winch machine , bull dog grips , pulley , hollow pipe , rope , wooden plank , cable deflection roller , crossby wedge , u pin , anchorage pin , inclinometers , anchor plate , wire cutter , safety belt , hammer , op hold fast , anchorage plate , hand gloves , safety helmet , pick axe , ladder , shovel gs , pan mortar , measuring tape , span yarn , carbineer clip total quantity : 10364...
5
South Eastern Railways - Jharkhand
37694394 auction sale of sl no. [ 1 ] lot no csbri0423002a, desc diesel generator set 2010 220v qty in nos 1 approx wt ferrous 165.5 kg. approx wt of non ferrous 4.5 kg. ( copper ) ledge ref.tp 4 / 80 locationf / s store under sse / bridge / sini. sl no. [ 2 ] lot no csbri0423002b, desc 10 bhp kerloskar engine 17 / 102762 qty in nos 1 approx wt ferrous 220 kg.approx wt of non ferrous nil ledge ref.tp 4 / 81 location f / s store under sse / bridge / sini. sl no. [ 3 ] lot no csbri0423002c, desc pumping set ruston with handle qty in nos 2 approx wt ferrous 1560 kg.approx wt of non ferrous nil ledge ref.tp 4 / 87locationf / s store under sse / bridge / sini. sl no. [ 4 ] lot no csbri0423002d, desc diesel generator 7.5 kva qty in nos 1 approx wt ferrous 165.5 kg.approx wt of non ferrous 4.5 kg. ( copper ) ledge ref.tp 4 / 93 location f / s store under sse / bridge / sini. sl no. [ 5 ] lot no csbri0423002e, desc double drum diesel operated winch 5t cap with 40 bhp kirloskar engine. qty in nos 1 approx wt ferrous 2050 kg.approx wt of non ferrous nil ledge ref.tp 4 / 112 location f / s store under sse / bridge / sini....
6
East Central Railway - Jharkhand
37648237 supply of motorized winch machine capacity 6 ton with motor of 7.5 hp motor make kirloskar, cgl, bbl. or similar [ warranty period: 30 months after the date of delivery ] => limited...
7
Drinking Water And Sanitation Department - Jharkhand
37562371 tender for emergent leakage repairing of spillway redial gate, winch machine, replacement of steel core, wire rope & accessories of hoisting etc. at gonda dam under d.w. & s. division, gonda, gonda, ranchi.....
8
East Central Railway - Jharkhand
37542947 supply of motorized winch machine capacity 06 ton with motor of 7.5 hp motor make kirloskar, cgl, bbl or similar [ warranty period: 30 months after the date of delivery ] ...
9
Steel Authority Of India Limited - Jharkhand
37313734 auction sale of materials scrap str. of crane,conv,winch ofold sgp...
10
Steel Authority Of India Limited - Jharkhand
36611555 auction sale of materials scrap str. of crane,conv,winch ofold sgp note: to be dismatled by the customer in presence of the deptt.and cisf...
11
East Central Railway - Jharkhand
36446831 auction sale of scrap misc. items ferrous ( 1 ) double strep winch type re parte, bolts, board, bearing etc., g.i iron 5510.50kg ( 2 ) empty drum 200 liters, m.s iron 1512.00kg ( 3 ) empty drum 20 liters, m.s iron 90.00kg ( 4 ) released 9t adjuster ( turn buckle ) , g.i iron 87.50kg ( 5 ) ss rope for winch type+3 pulleys atd ( scrap ) / unserviceable size 10.50m / 7.50m, s.s iron 1545.00kg ( 1 5 ) location sse / trd depot / jpl...
12
Bharat Coking Coal Limited - Jharkhand
36425581 complete rewinding /repairing of 40 h.p. 550 v 975 rpm k/e make motor for winch at 5 pit joyrampur colliery local id no. joy 5 m04 of joyrampur colliery under lodna area....
13
East Central Railway - Jharkhand
36361410 auction sale of disposal of signalling release materials ferrous such as (1) gate warning bell (r) qty=15nos.=39kg, (2)signal unit 4 aspect (r) qty=2nos.=325kg, (3) axle counter box (r) qty=1no.=66kg, (4) gate boom (mechanical) (r) qty=3nos.=171.4kg, (5) winch machine (r) qty=1no.=108kg, (6) gate pedestal frame (r) qty=6nos.=1248kg, (7) lock bar angle (r) qty=9nos.=171kg, (8) sms slide of sorts (r) qty=5nos.=239kg, (9) fount of signal lamp (r) qty=2nos.=4.6kg, (10) gate weight of srots (r) qty=6nos.=702kg, (11) base of signal post (r) qty=1no.=69kg, (12) signal post (r) qty=1no.=52kg, (13) rod of sorts (r) qty=5nos.=70kg, (14) universal axle counter only body (r) qty=1no.=19.4kg, (15) hmu (r) qty=15nos.=12kg, (16) junction box (r) qty=2nos.=16kg, (17) ekt of sorts (r) qty=4nos.=23.6kg, (18) route unit (r) qty=1no.=42kg, (19) shunt signal unit (r) qty=7nos.=175kg, (20) signal post with base 3.5mtr & 4.5mtrs (r) qty=17nos.=2992kg, (21) signal post of sorts (r) qty=4nos.=228kg, (22) earth lever (r) qty=1no.=90kg, (23) direction type route indicator of sorts (r) qty=1no.=105kg, (24) point machine only body (r) qty=16nos.=1920kg, (25) boom reset (r) qty=4nos.=280kg, (26) relay rack 81 df with complete scaffolding (r) qty=2nos.=44kg, (27) lead out crank (r) qty=1no.=19kg, (28) empty drum (cap. 210ltr) (r) qty=45nos.=810kg, location store campus. [i] loading by the labour of purchaser, [ii] delivery on the basis of actual number, [iii] cutting allowed if required only for loading purpose....
14
Bharat Coking Coal Limited - Jharkhand
36205637 repairing 25te kiva power winch drum break, motor gear box break and changing gearbox oil seal aebsc...
15
Bharat Coking Coal Limited - Jharkhand
36100175 complete repairing of brake system of kiva power winch 25 ton capacity of 1 pit kustore colliery under pb area. ...
16
Central Coalfields Limited - Jharkhand
36095563 repairing of winch assembly of ace 12 te. crane at govindpur ph ii ocp, kathara area...
17
Bharat Coking Coal Limited - Jharkhand
36037782 transporting of 25 tonne lifting capacity popwer winch installed at pb project colliery to burragahr colliery and installation at 02 no pit burragarh colliery ...
18
Urban Development Department - Jharkhand
35912472 supply and installation work of furniture, solar grid for power backup, diesel generator, solar light for campus illumination at mihijam nagar parishad office building 1 supplying and placing of revolving chair with arm, descriptionmake all day comfort and support your priority with the smart jordan office chair. designed for your well being, it boasts a curved backrest to improve your posture and provide comfortable seating all day long. the innovative self weight multi locking mechanism along with an adjustable headrest & armrest, offer great adjustability to enjoy ergonomic comfort. a strong chrome base supports the structure, while the 55mm castor wheels and a 360 degree swivel provide swift yet stable movement. the breathable mesh back further helps in enjoying cool comfortable seating. a complete office chair, get the jordon office chair to experience comfort like never before.product dimension :undefinedvariation :premium mesh chair, high backthe product must be from a manufacturer having iso 9001, iso 14001 , , aiota , bifma compliant, green guard, sedexcertificate. make durian, godrej , featherlite.warranty 5years. 2 office chairs with wheelssupplying and placing of office chair, descriptionmake all day comfort and support your priority with the smart jordan office chair. designed for your well being, it boasts a curved backrest to improve your posture and provide comfortable seating all day long. the innovative self weight multi locking mechanism along with an adjustable armrest, offer great adjustability to enjoy ergonomic comfort. a strong chrome base supports the structure, while the 55mm castor wheels and a 360 degree swivel provide swift yet stable movement. the breathable mesh back further helps in enjoying cool comfortable seating. a complete office chair, get the jordon office chair to experience comfort like never before.product dimension :undefinedvariation :premium mesh chair, medium backthe product must be from a manufacturer having iso 9001, iso 14001 , , aiota , bifma compliant, green guard, sedexcertificate.make durian, godrej , featherlite.warranty 5years.model no 70024 / mb / premium 3 office chairs without wheelssupplying and placing ofcantileaver chair, experience never ending comfort and support with the smart jordon cantilever chair. designed for your well being, it boasts an adjustable lumbar support to improve your posture and provide comfortable seating all day long. the breathable mesh back and the sturdy armrests further help in enjoying comfortable seating. supported by a strong chrome cantilever base, get the jordon cantilever chair to experience comfort like never before.product dimension :undefinedvariation :mesh chair, medium backthe product must be from a manufacturer having iso 9001, iso 14001 , , aiota , bifma compliant, green guard, sedexcertificate. .make durian, godrej , featherlite.warranty 5years.model no mmpl / 70024 / cn 4 executive table with 3d drawer and side tablesupplying and placing of executive table, material & subtype engineered wood particle boardcolour & colour family brown wengedimension ( w ) 2100mm x ( d ) 900mm x ( h ) 750mmsize grand, the side runner is fixed and comes with added drawers and a cabinet for even more storage options.product dimension :undefinedvariation :directors deskthe product must be from a manufacturer having iso 9001, iso 14001 , , aiota , bifma compliant, green guard, sedexcertificate. makedurian, godrej , featherlite.warranty 5years. 5 executive table with side tabledimensions: h 30.1 x w 57.8 x d 78.7 ( all dimensions in inches ) weight: 90 kgwarranty: 3 months warrantyassembly: carpenter assemblyprimary material: engineered wood 6 conference tablesupplying and placing of conference table, made of prelaminated particle board in brown black oak color with main table size7300mm ( l ) x 1600mm ( d ) x 760mm ( h ) the product must be from a manufacturer having iso 9001, iso 14001 , , aiota , bifma compliant, green guard, sedexcertificate. makedurian, godrej, featherlite.warranty 5years.model no dws / 34762 7 wooden cupboard:supplying and placing of wooden cupboard, material & subtype engineered woodfinish mattecolour & colour family white mapledimension ( w ) 1950mm x ( d ) 400mm x ( h ) 1200mmfinish matte, the product must be from a manufacturer having iso 9001, iso 14001 , , aiota , bifma compliant, green guard, sedexcertificate. makedurian.warranty 5years.model no dws / 34725 8 steel almirah:supplying and placing of steel almirah, metal storage of size 900mm ( l ) x 450mm ( d ) x 1980mm ( h ) body made out in 22 gague ( 0.8mm ) & door 19 gague ( 1 mm ) crca sheet. 4 adjustable shelve in 22 gague ( 0.8mm ) & pedestal 18 gague 1.2 mm crca sheet.having four shelves making five compartment, uniformly distributed load capacity of each shelf shall be 60 kg maximum, fitted with ms body lock & handle. finishing with epoxy polyester powder coated to the thickness 50 60 microns ( + / 5 micron ) in color grey light grey, the product must be from a manufacturer having iso 9001, iso 14001 , , aiota , bifma compliant, green guard, sedexcertificate. makedurian, godrej, featherlite.warranty 5years. 9 sofa:supplying and placing ofsofa, material & subtype fabric premium velvetupholstery material fabric, seat material fabricleg material solid wood, finish matte, colour & colour family grey coco greydimension ( w ) 2090mm x ( d ) 960mm x ( h ) 940mm + 2 nos ( w ) 1125mm x ( d ) 960mm x ( h ) 940mmseating capacity 5 seaterseating height 520mm, the product must be from a manufacturer having iso 9001, iso 14001 , , aiota , bifma compliant, green guard, sedexcertificate. makedurian, godrej, featherlite.warranty 5years.model no harlow / 3 10 chair tripple seatersupplying and placing ofchair triple seater, metal visitor benchlength 1820mmx depth 690mm x height 790mm1 ) seat & back single section 2 ) seat is 430 mm from ground3 ) perforated mild steel powder coated4 ) seat thickness 1.2 mm 5 ) seat width 520 mm6 ) beam mild steel with black power coating thickness 1.6mm7 ) mild steel border with chrome plating for every seat & back 8 ) mild steel handles chrome plated & die pressed legs at the end of chairs9 ) gross weight of regular 3 seater will be 31 kg.the product must be from a manufacturer having iso 9001, iso 14001 , , aiota , bifma compliant, green guard, sedexcertificate. makedurian, godrej, featherlite.warranty 5years. 11 centre table:supplying and placing of centre table, material & subtype veneer / solid wood steam beech woodleg material solid woodfinish mattecolour & colour family brown wengedimension ( w ) 1200mm x ( d ) 600mm x ( h ) 460mmfinish matte, the product must be from a manufacturer having iso 9001, iso 14001 , , aiota , bifma compliant, green guard, sedexcertificate. makedurian.warranty 5years.model no molly / ct 12 notice boardsupplying and placing of notice board, material softboard core, alloy aluminium ( 6063 t6 ) frame, premium flocked fabric ( velvet ) cloth surface & virgin abs cornerssoftboard core, alloy aluminium ( 6063 t6 ) frame, premium flocked fabric ( velvet ) cloth surface & virgin abs corners see morecolour greensize 3 x5 ft, the product must be from a manufacturer having iso 9001, iso 14001 , , aiota , bifma compliant, green guard, sedexcertificate. makedurian.warranty 5years. 13 office workstationsupplying and placing ofworkstation, modular workstation non sharingmodel: 65 series linear , sku :65 / 4per seating size : 1200mm ( l ) x 600mm ( d ) x 650mm ( h ) , whole cluster size : 4800mm ( l ) x 600mm ( d ) x 650mm ( h ) .* supplying and placing of linner workstation, 67mm thk sliding tilebase partition of 1200mm height , table top 25mm thick of size 1184mm ( l ) x 592mm ( d ) , providing and supplyinglinner workstation cluster of four in completely knock down conditions with an overall size 4800mmx 600mmx 1200mm that is to be assembled at site. the worktopshallhavethesize1184mm x 592mmmadeupof25mmthickpre laminated particle board of grade ii type iii of is 12823 / latest . of is level with approved laminate and finish as per approved shade. * the profile of the top shall be in rectangle shape and the edges shall be sealedwith 2mm thick thin strip of impermeablepvcthat is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. * the top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions ( pre treated ) and duly powder coated with polyester powder coating 40p 60pthick . the trims shall have the size 67mm x 19mm with 1.5mmthickcovered with die cast end caps on joints 2 ways, 3 ways& 4 ways ( l coverforcorner, t coverformiddlesectionwherever required ) . 14 hot, cold and normal water purifierno of taps 03body stainless steeltechnology ro + uvpower electricityproduct dimensions 1150mm x 1500mm x 750mm 15 ashjay sun screen roller blind 16 providing and fixing powder coated aluminium work ( minimumthickness of powder coating 50 micron ) consisting of tee / anglesections, of approved make conforming to is : 733 in frames of falseceiling including aluminium angle cleats with necessary c.p. brass / stainless steel sunk screws, aluminium perimeter angles fixed towall with stainless steel rawl plugs @ 450 mm centre to centre andfixing the frame work to g.i. level adjusting hangers 6 mm dia. withnecessary cadmium plated machine screws all complete as perapproved architectural drawings and direction of the engineer incharge ( level adjusting hangers, ceiling cleats and expansion holdfasteners to be paid for separately ) . 17 inverter / ups 2kva2 kva ups inverter 24v, pure sine wave for home, office and shops with 5 years warrantyinverter type: pure sine wave output ensuring the safety of your appliancesadvanced lcd display: show inverter battery performance statistics including battery charging time, back up time, percentage load running on the inverter, fault indications, and many moreconvert to a smart inverter: icruze can be converted to a smart inverter by connecting an external luminous connect dongle ( wi fi / gsm ) and get inverter statistics on mobile appuser settable controls: mode selection ( eco / ups ) , battery type and capacity, and no load shutdown prevention through control buttons present on the front panelbattery compatibility: compatible with 2 * ( 12v ) battery with 60ah 220 ah capacity. the inverter supports all types of batteries such as flat plate, tubular, and smf.protection: ac mcb, by pass switch, no load shutdown, overload, over temperature, and short circuit 18 led tvtype: led smart tvscreen: 55 inchesport: usb+hdmiwarranty: 1 year 19 computer set:type: desktop processor: amd ryzen 3 / intel core i5memory: 8 gb ddr4 2400 sdram ( 1 x 8 gb ) ; storage: 256 gb ssd / 1tb hdd storagedisplay: 21.5 diagonal fhd ( 1920 x 1080 ) , ips, three sided micro edge, anti glare, 250 nits, 72% ntscoperating system: microsoft windows 10 professional edition; microsoft office 2019 home and student editionmemory: 8 gb ddr4 2400 sdram ( 1 x 8 gb ) ; storage: 256 gb ssd storage; 1tb hdd storagedisplay: 23.8 diagonal fhd ( 1920 x 1080 ) , ips, three sided micro edge, anti glare, 250 nits, 72% ntscoperating system: microsoft windows 10 home edition; microsoft office 2019 home and student editionups capacity 600vatransfer time typics 4 8 ms 20 printer:laserjet 108w single function monochrome laser wi fi printer for home / office, compact design, printingmodel name ?laserjetproduct dimensions ?27.99 x 38.4 x 26.11 cm; 8.71 kilogramsitem model number ?108wmemory storage capacity ?64 mboperating system ?windows®:7 ( 32 / 64 bit ) , 2008 server r2, 8 ( 32 / 64 bit ) , 8.1 ( 32 / 64 bit ) , 10 ( 32 / 64 bit ) , 2012 server, 2016 server, macos v10.14 mojave, macos v10.13 high sierra, macos v10.12 sierra, os x v10.11 el capitanhardware platform ?tablet, smartphonehardware interface ?usb 2.0max printspeed monochrome ?21 ppmprinting media type ?card stock, labelsprinter output type ?monochromeprinting technology ?laserprinter media size maximum ?c5, a4, a5, di, letter, jis b5resolution ?600 x 600 dpi 21 printer:laserjet m126a b&w printer for office: 3 in 1 print, copy, scan, compact, affordable, durablelaserjet 108w single function monochrome laser wi fi printer for home / office, compact design, printingproduct dimensions ?25.2 x 26.6 x 42 cm; 8 kilogramsitem model number ?126amemory storage capacity ?128 mboperating system ?linuxmax printspeed monochrome ?20 ppmsupports color printing ?yesprinting media type ?envelopes, paper ( plain ) , transparenciesprinter output type ?monochromeprinting technology ?laserprinter media size maximum ?8.5 x 11 inchcompatible devices ?smartphonesspecial features ?compactmounting hardware ?printer 1n, power cord 1n, guide 1n, flyers 1n, usb cable 1n, cd 1n, errata 2n, setup poster 1nnumber of items ?1noise level ?48 dbbatteries required ?nototal usb ports ?1connector type ?usbform factor ?all in onemanufacturer ?jabil electronics ( weihai ) , china 22 wired cardioid microphoneproduct dimensions ?15.24 x 38.1 x 12.7 cm; 400 gramsitem model number ?ahuja acm 96colour ?blackconnector ?xlr connectoritem weight ?400 gmanufacturer ?ahujacountry of origin ?india 23 ahuja ceiling speaker 6w with white grill ( pack of 6 speakers ) brand ahujaspeaker type bookshelfrecommended uses for product musicsubwoofer diameter 18 inchesmounting type ceiling mount 24 xerox machine multi function monochrome laser printer with auto duplex printing & network series ?dcp l5600dncolour ?greyform factor ?all in oneitem height ?48.6 centimetersitem width ?49.5 centimetersproduct dimensions ?42.7 x 49.5 x 48.6 cm; 17.5 kilogramsitem model number ?dcp l5600dnoperating system ?windowsare batteries included ?noincluded components ?usb cable, power cord, consumables, quick setup guide and driver cdmanufacturer ?brotheritem weight ?17 kg 500 g 25 air conditioner 1.5 tonne5 star split ac ( inverter type ) is 1391 part 1 26 air conditioner 2 tonne5 star split a.c ( inverter type ) is 1391 part 1 27 silent type d.g set of capacity 100kva with amf panel is / iec 60034 1 is:13018 28 supply, installation, testing and commissioning of ongrid solar photovoltaic power plant conforming to mnre specifications as amended, consisting of mono / poly crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on aluminium / gi structure of suitable strength with following components complete as required: a ) solar photovoltaic module of capacity 330 wp or above, manufactured in india, conforming to is 14286 / iec 61215, is / iec 61730 part 1, is / iec 61730 part 2. solar photovoltaic module conversion efficiency shall not be less than 16.5%. pv modules used in solar power plants / systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years.b ) power conditioning unit ( pcu ) of 350 800 v dc input voltage range and 400 v ac, three phase, 4 wire, 50hz + / 2.5 hz, output voltage suitable to generate ac power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree c. the pcu shall adjust the voltage and frequency level to suit the grid voltage frequency.c ) data monitoring system complete with accessories.d ) fixing of array junction box & main junction box with ip 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required.e ) lightning and surge voltage protection.f ) connections & interconnections by supplying & fixing required size xlpe insulated copper conductor 1.1 kv grade armoured power and control cables between solar modules, main power cable to grid supply pcu unit along with supplying & fixing of necessary channel / conduit lugs and other accessories etc. as required. 29 supplying and fixing of following size pvc conduit alongwith the accessories in surface / recess including painting in case of surface conduit or cutting and making good the same in case of recessed conduit as required as per specification.20mm dia 30 25mm dia 31 32mm dia 32 40mm dia 33 providing and fixing ofcat 6 ( e ) giga speed cableunarmouredcopper conductor frlscomputercables ofreputable make in existing conduits . 34 fms, 24f, 1u, lc sm, factory fitted with pigtails, splice tray, couplers, slice protectors and management rings. 35 lc lc singlemode duplex patch cord, lszh, 3 meter 36 l2 poe access switch supply, fitting, fixing, connecting and testing of switch with 24 x 10 / 100 / 1000t poe ports and4 x 100 / 1000x sfp ports, switching capacity56gbps and forwarding rate 41.7mpps, switch should support poe and poe+ with 370w minimum power budget, operaating temperature 0°c to 50°c, switch should support link reccovery within 50ms for ring architecture, sdn or similar kind of technolgy should support, warranty 5 year from day 1 . make: cisco ws c2960x 24ps l / allied telesis at x230 28gp / hp / juniper ex2200 24p ) the above l2 managed data switch consists of the following: 1. power cord india, right angle. 2. both side cable connector. 3. 1 year free service pack. interface 24 x 10 / 100 / 1000t ports and 4 x 100 / 1000x sfp ports switching capacity / forwarding rate : 56gbps / 41.7mpps performance: up to 16k mac addresses, 256mb ddr sdram management: console port, gui, telnet, ssh, snmpv1, 2 and 3, powerful centralized management and zero touch device installation and recovery like sdn, security: console port, gui, telnet, ssh, snmpv1, 2 and 3, powerful centralized management and zero touch device installation and recovery like sdn, routing: ipv4 static routing and rip. fail over: switch capable of recovery within 50ms in a ring for application high availability ipv6: device management over ipv6 networks with snmpv6, telnetv6, sshv6 and syslogv6 diagnostic: optical digital diagnostics monitoring, automatic link flap detection and port shutdown, port and vlan mirroring ( rspan ) standard protocol: ieee 802.1q, ieee 802.1w, ieee 802.1s, ieee 802.1p, ieee 802.1ab, ieee 802.1ax, ieee 802.3ad operating temparature: 0°c to 50°c certification: en, ul and rohs warranty: 5 years. cost of l2 managed data switch 37 l2 data access switch supply, fitting, fixing, connecting and testing of switch with 24 x 10 / 100 / 1000t gigabit ports and4 x 100 / 1000x sfp ports, switching capacity56gbps and forwarding rate 41.7mpps, switch should support igmp, bgrp and gigabit ports, operaating temperature 0°c to 50°c, switch should support link reccovery within 50ms for ring architecture, sdn or similar kind of technolgy should support, warranty 5 year from day 1 . make: cisco ws c2960x 24ts l / allied telesis at x230 28g / hp / juniper ex2200 24 ) the above l2 managed data switch consists of the following: 1. power cord india, right angle. 2. both side cable connector. 3. 1 year free service pack. interface 24 x 10 / 100 / 1000t ports and 4 x 100 / 1000x sfp ports switching capacity / forwarding rate : 56gbps / 41.7mpps performance: up to 16k mac addresses, 256mb ddr sdram management: console port, gui, telnet, ssh, snmpv1, 2 and 3, powerful centralized management and zero touch device installation and recovery like sdn, security: console port, gui, telnet, ssh, snmpv1, 2 and 3, powerful centralized management and zero touch device installation and recovery like sdn, routing: ipv4 static routing and rip. fail over: switch capable of recovery within 50ms in a ring for application high availability ipv6: device management over ipv6 networks with snmpv6, telnetv6, sshv6 and syslogv6 diagnostic: optical digital diagnostics monitoring, automatic link flap detection and port shutdown, port and vlan mirroring ( rspan ) standard protocol: ieee 802.1q, ieee 802.1w, ieee 802.1s, ieee 802.1p, ieee 802.1ab, ieee 802.1ax, ieee 802.3ad operating temparature: 0°c to 50°c certification: en, ul and rohs warranty: 5 years. cost of l2 managed data switch 38 router 39 1 mtr patch cord 40 3 mtr patch cord 41 2 mtr sc lc fiber patch cord 42 2 mtr lc lc fiber patch cord 43 6 core single mode ofc 44 wi fi smart access point 45 excavation in soil by manual means. ( excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 metres. ) 46 plant mix method ( construction of granular sub base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 ) 47 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size / shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer in charge. 48 providingand laying in position cement concrete ofwith nominal mix ( 1:1:5:3 ) .... all work upto plinth level 49 sand ( lead 1+ 14 k.m ) 50 stone chips ( lead 1+14 k.m ) 51 cement ( lead 3 k.m ) 52 earth ( lead 1km ) 53 supply and installation of ( fixed dome type camera ) with dvr & 4tb hdd & 22 led tv ( considering cable length of 500 mtrs. ) 54 4mp accusense bullet full hd 1080p, 1 / 3 progressive scan cmos, 50m ir distance, 120db wdr, 3d dnr, exir high performance leds, poe supported, ip67 ingress protection level. ( 4 no. ) 55 30m ip bullet camera full hd 1080p, 1 / 3 progressive scan cmos, 50m ir distance, 120db wdr, 3d dnr, exir high performance leds, poe supported, ip67 ingress protection level. ( 4 no. ) 56 4mp audio dome camera full hd 1080p, 1 / 3 progressive scan cmos, 50m ir distance, 120db wdr, 3d dnr, exir high performance leds, poe supported, ip67 ingress protection level. ( 4 no. ) 57 4mp dome camera full hd 1080p, 1 / 3 progressive scan cmos, 50m ir distance, 120db wdr, 3d dnr, exir high performance leds, poe supported, ip67 ingress protection level. ( 4 no. ) 58 4k 32ch. nvr 32ch. ip video input, 160mbps incoming / outgoing bandwidth, 2 sata interface with max. 6tb capacity, h.265 video compression technology. 59 8tb surveillance hdd, 2m 60 i / o port 61 12u network rack 62 24port poe switch 2 sfp 63 16port poe switch 2 sfp 64 24 port loaded patch panel 65 6 port liu 66 12 port liu 67 16 port poe managed switch 2 sfp 68 16 port managed switch with 2 sfp 69 8tb hdd 70 sfp module 10g 71 sfp module 1g 72 22u floor standing rack ( space provision for future server or network equipments integration ) 73 coax rg 6 cable 74 coax rg 6 sockets 75 55 full hd led monitor signage display 76 hdpe pipe, 40m 77 connectors, cables, pigtails, fiber patch cords, adaptors etc 78 installation & commissioning 79 200 / 150 mm dia deep borewell : suppling all materials labours , tools & equipments for drilling 200 / 150 dia borewell in bell hammer technology inclusive of molillisation demolillsation of rig air compressor all accessories tools and plants labour etc all complete job including of transportation charges up to site do ( a ) from 0.00 m to 50.00 m below g.l 80 ( b ) from 50.00 m to 125.00 m 81 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized pvc medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of engineer in charge.200mm nominal size dia. 82 development of tube well in accordance with is : 2800 ( part i ) and is: 11189, to establish maximum rate of usable water yield without sand content ( beyond permissible limit ) , with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “v” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i / c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of engineer in charge. 83 providing and fixing suitable size threaded mild steel cap or spot weldedplate to the top of bore well housing / casing pipe, removable as perrequirement, all complete for borewell of:200 mm dia. 84 providing and fixing m.s. clamp of required dia to the top of casing / housing pipe of tubewell as per is: 2800 ( part i ) , including necessary bolts & nutsof required size complete. 85 supplying 150mm dia. submersible pump sets confirming to is 8034 and motor cvonfirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft ant polypropylene / norylimpeller. motor suitable for working on 415 v+10%, 3ph, 50 hz, ac supply with cable guard, thurst carbon / fibre bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump ste shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined no return valve shall be provided with pump. 3 m submersible copper conductor cable in single / double run shall be provided with each pump.submersible pump set 100mm dia ( with polypropylene / noryl impeller ) 2 hp 86 supplying fully automatic star delta starter to operate induction motor working on 415v. 3ph 50 hz no volt coil, over load element, on off push buttons with necessary materials and connected to supply etc complete starter with original sheet steel encloser. 87 supplying , fitting & fixing & connecting 3 core 4 sqmm flat copper submerssible cable of finolex / hevels make including all taxes , royalty etc all complete job as per direction of e / i 88 supplying and laying / lowering of gi pipe of 50 mm dia including of required fittings solvent etc complete job as per direction of e / i 89 providing and stacking of bottle palm of ht. 150 180 cm bottom girth 20 25 cm well developed in big poly bags of size 25 cm as per direction of the officer in charge. 90 providing and stacking of foxtail palm of ht. 180 210 cm bottom girth 25 30 cm well developed in big size hdpe bags as per direction of the officer in charge. 91 providing and stacking of polyalthia longifolia ( ashok ) of height 180 195cm. in gunny bag of size 30 cm as per direction of the officer in charge. 92 providing & laying selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly, as per direction of officer in charge 93 supply 20 m. high mast in two section construction s355 grade as per bs en 10 025 top dia 150mm bottom dia 410 mm. plate thickness 3 mm. , 20 side polygon galvanisation as per bs en iso 1461 , base plate dia 570 mm. base plate thickness 25 mm. , gisingle spike lighting protection maximum wind speed 47 m per switch 8 nos foundation bolts of pcd 490 mm. is 600 for 30 mm. dia / 850 mm long luminaries carriage material for 50 nb erw class b ms pipe , dia of carriage ring 535 mm. with 6 arm welded , 2 section having carring capasity upto 12 luminiaries trelling cable 544 sq mm. pvc flexible cupper cunductor winch / power tool, double drum , incoming 35 sq.mm. and out going 16 and 25 sq. mm. terminals is 1944 / 5 94 for 20 mtr. high mastitc of the high mast and light fixture with the help of suitable tools and plants, wiring of luminaries with all wiring material like pvc insulated pvcsheathed flexible cable of suitable copper conductor lugs, mcb and all labour and construction of shallow foundation with m25 grade concrete for the high mast considering safe soil bearing capacity of 10t / mtre sq. for 20 m high mast 95 erection of metallic pole of following length in cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.upto 13 meter...
19
Bharat Coking Coal Limited - Jharkhand
35838174 repairing of hoist gear winch brake assembly along with hoist pinion shaft assembly of ekg shovel sl.no. 473 at nakc ocp of govindpur area iii, bccl. please refer annexure b in tender document...
20
Private Company - Jharkhand
35802684 auction sale of hydra, (damage condition) “as us where is ., winch machine(1 no. not working & 1 no.repairable, mixed steel scrap...
21
Uranium Corporation Of India Limited - Jharkhand
35771958 supply of electric winch...
22
Bharat Coking Coal Limited - Jharkhand
35737173 repairing of winch gear box assembly and radiator of ace crane sl no. 189758 at block iv ocp of govindpur area iii, bccl. please refer annexure b in tender document...
23
Bharat Coking Coal Limited - Jharkhand
35699398 complete repairing and overhauling of kira power winch ,25 tonne capacity of kb 10/12 pit colliery, pb area. complete repairing and overhauling of kira power winch ,25 tonne capacity of kb 10/12 pit colliery, pb area....
24
Central Coalfields Limited - Jharkhand
35538823 providing and fixing of winch and wire rope under ashok project piparwar....
25
Central Coalfields Limited - Jharkhand
35453264 repairing of winch system of crane sl. no. mc555 of bokaro ocp...
26
Central Coalfields Limited - Jharkhand
35360252 repairing skid shed with provision of winch and rope under ashok project, ppr area....
27
South Eastern Railways - Jharkhand
34866574 supply of winch machine, 03 ton capacity (rope length 100m) make: hyt or similarwinch machine, 03 ton capacity (rope length 100m) make: hyt or similar,supply, erection, testing and commissioning of winch machine, 03 ton capacity (rope length 100m) (details of technical specification enclosed in annexure)...
28
East Central Railway - Jharkhand
34799316 auction sale of disposal of ferrous scrap released materials such as (1) compensater of sorts qty=59nos.=885kg (2) running rod of sorts (solid) qty=265nos.=6625kg (3) running rod of sorts (hollow) qty=639nos.=10224kg (4) running rod of sorts (small size) qty=564nos.=2256kg (5) crank of sorts qty=370nos.=3700kg (6) radial guide of sorts qty=16nos.=160kg (7) mechanical detector of sorts qty=5nos.=200kg (8) fpl of sorts qty=15nos.=180kg (9) trestle of sorts qty=1106nos.=4424kg (10) semaphore signal of sorts with accessories qty=27nos.=3240kg (11) point detector of sorts qty=59nos.=2360kg (12) adjusting rod of sorts qty=52nos.=156kg (13) hand lever with all accessories qty=231nos.=18480kg (14) gate boom of all accessories qty=1set=120kg (15) relay rack qty=5nos.=630kg (16) annunciator of sorts qty=4nos.=4kg (17) slot box of sorts qty=2nos.=8kg (18) lock bar of sorts qty=15nos.=300kg (19) location box full qty=3nos.=450kg (20) location box half qty=1no.=85kg (21) balance of signal of sorts qty=1set=60kg (22) miniature lock with key of sorts qty=5nos.=5kg (23) filter unit of sorts qty=3nos.=105kg (24) remote terminal unit of sorts qty=1no.=40kg (25) tlbi of sorts qty=2nos.=252kg (26) winch machine of so8rts qty=2nos.=120kg (27) cb of sorts qty=78nos.=156kg (28) ufsbi of sorts qty=2nos.=100kg (29) crank base of sorts qty=7nos.=35kg (30) ekt of sorts qty=7nos.=42kg , location pathardih station area.[i] loading by the labour of purchaser, [ii] delivery on the basis of actual weight....
29
East Central Railway - Jharkhand
34731924 auction sale of disposal of released & un usuable signalling materials such as ( 1 ) winch machine qty=7nos.=16.10kg ( 2 ) signal unit 3 aspect qty=10nos.=1290kg ( 3 ) empty drum cap 20ltrs. qty=60nos.=126kg ( 4 ) signal unit 2 aspect qty=14nos.=1372kg ( 6 ) gate boom mechanical ( r ) qty=31nos.=548kg ( 6 ) gate boom electrical ( r ) qty=10nos.=90kg ( 7 ) block bell qty=10nos.=99kg ( 8 ) rod of sorts qty=360nos.=8230kg ( 9 ) pedestal qty=8nos.=1665kg ( 10 ) signal machine qty=1no.=83.20kg ( 11 ) lever qty=2nos.=46.8kg ( 12 ) reverser qty=2nos.=67.4kg ( 13 ) gate weight sorts qty=8nos.=616kg ( 14 ) hmu qty=148nos.=59.20kg ( 15 ) crank qty=11nos.=147.400kg ( 16 ) vertical crank qty=1no.=19.400kg ( 17 ) compensator qty=2nos.=70.600kg ( 18 ) electric point machine without motor qty=9nos.=2280kg ( 19 ) j.b qty=19nos.=46.4kg ( 20 ) cls post 3.5mtr. qty=1no.=65kg ( 21 ) cls post 4.5mtrs with base qty=5nos.=675kg ( 22 ) apparatus case full with door qty=9nos.=900kg ( 23 ) apparatus case full without door qty=7nos.=455kg ( 24 ) half apparatus case with door qty=1no.=75kg ( 25 ) half apparatus case without door qty=1no.=60kg ( 26 ) evaluator box qty=16nos.=170.30kg ( 27 ) ladder with platform qty=7nos.=347.90kg ( 28 ) ground connection of sorts qty=209nos.=2470.09kg ( 29 ) location box full qty=14nos.=1400kg ( 30 ) positive boom lock qty=06nos.=114kg ( 31 ) ladder qty=5nos.=140kg, location store campus sse / s / store / dhn, [ i ] loading by the labour of purchaser, [ ii ] delivery on the basis of actual number only....
30
Bharat Coking Coal Limited - Jharkhand
34713030 repairing of winch gear box assembly of ace crane machine sl. no. 1912864 at nakc ocp of govindpur area iii, bccl. please refer annexure b in tender document...
31
National Institute of Foundry and Forge Technology - Jharkhand
34477056 equipments for engineering mechanics lab 1 screw jack apparatus with weights 2 worm and worm whee:sinoewifh weights 3 bell crank lever mechanism instrument 4 jib crane mechanism instruments 5 winch crab single with weight 6 universal force table ( normal ) 7 moment of inertia of flywheel 25 cm with weights type 10kg, balance ) 9 parallelogram forces apparatus 10 friction slide apparatus with weight ( specification enclosed in annexure 5 ) => limited...
32
South Eastern Railways - Jharkhand
34378383 supply of winch machine, 03 ton capacity ( rope length 100m ) make: hyt or similarwinch machine, 03 ton capacity ( rope length 100m ) make: hyt or similar, supply, erection, testing and commissioning of winch machine, 03 ton capacity ( rope length 100m ) ( details of technical specification enclosed in annexure ) ...
33
Bharat Coking Coal Limited - Jharkhand
34296219 complete repairing / overhauling of damaged hand winch having capacity 10 ton and built of foundation for winch at bhutgaria under hurriladih colliery. ...
34
Central Coalfields Limited - Jharkhand
34045001 bids are invited for strg cylinder assy lh , pump coupling assy , bush , pin fab 149x80x50 , slotted nut , bush nylon mo s2 , pin , pin steering jack rear , spacer goose neck lubelon , bush goose neck lubel on , bearing washer , thrust bearing , bearing cup , washer special , tie bolt , tie bolt spring , thrust washer , nut 36x3 , engine mtg rubber pad , rubber pad radiator , clutch release bearing , seal kit steering jack , coupling nit with brake disc , rearaxle , gasket top cover , bull gear , t r bearing32212 , trumpet housing lh rh astha , gaskettrumpet housing , bull pinion shaft left , needlebearing , needle cage , bull pinion shaft rh , covertrumpet , oil seal , gasket , oil seal 50x72x8 , brakeliner assy , winch assembly , h p hose sae100r12 ,hose , h.p hose total quantity : 73...
35
Water Resources Department - Jharkhand
33988361 supply of rate items cast iron stainless steel plate phosphorus bronze en 9 grade round bar single thrust ball bearing suitable for spindle dia. double thrust ball bearing suitable for spindle dia. musical note hollow type rubber ( teflon cladded ) solid musical note type rubber seal ( teflon claded ) musical note hollow type rubber ( plain ) solid musical note type rubber seal ( plain ) flat rubber seal wedge type rubber seal rubber seal jointing adhesive stainless steel counter shank nut, bolt & washer. diver coupling steel core wire rope ( construction 6x36 ) fiber core wire rope ( construction 6x36 ) worm gear box consisting of worm gear, worm shaft, upper & lower thrust heavy side roller gearing, spur gear. ( worm gear id to be made out of phosphorous bronze ) . industrial oxygen gas acetylene gas roller bearing chain pully hydra 14x coles crane ( 360 degree rotating ) brake shoe assembly with all accessories. wire rope u clamp cadmium compound grease rope socket rope thimble winch crab double reduction hoisting system including steel core wire rope of 18 mm diameter etc. rope drum hoisting system consisting of double rope drum with two stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. rope drum hoisting system consisting of single rope drum with single stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. gear box for hoisting system make radicon, greaves, premium or equivalent chain sprocket for s.r.u drive rachet lock system. bearing housing. gear oil for gear box. m.s channels square bar round bar m.s pipe ( hollow type ) ( a ) 75mm dia ( b ) 150mm dia ( c ) 200mm dia ( d ) 250mm dia hilti bolt ht nut, bolt & washer plummer block 126 accessories forgear operated sluice valve. rubber insertion gland packing gland flange spl. type gland flange bolt nut thrust ball bearing gear box operating wheel gate hanging bracket flange socket tail piece flange collar tail piece...
36
Water Resources Department - Jharkhand
33962978 e quotation for non scheduled item rate cast iron stainless steel plate phosphorus bronze en 9 grade round bar single thrust ball bearing suitable for spindle dia. double thrust ball bearing suitable for spindle dia. musical note hollow type rubber ( teflon cladded ) solid musical note type rubber seal ( teflon claded ) musical note hollow type rubber ( plain ) solid musical note type rubber seal ( plain ) flat rubber seal wedge type rubber seal rubber seal jointing adhesive stainless steel counter shank nut, bolt & washer. diver coupling steel core wire rope ( construction 6x36 ) fiber core wire rope ( construction 6x36 ) worm gear box consisting of worm gear, worm shaft, upper & lower thrust heavy side roller gearing, spur gear. ( worm gear id to be made out of phosphorous bronze ) . industrial oxygen gas acetylene gas roller bearing chain pully hydra 14x coles crane ( 360 degree rotating ) brake shoe assembly with all accessories. wire rope u clamp cadmium compound grease rope socket rope thimble winch crab double reduction hoisting system including steel core wire rope of 18 mm diameter etc. rope drum hoisting system consisting of double rope drum with two stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. rope drum hoisting system consisting of single rope drum with single stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. gear box for hoisting system make radicon, greaves, premium or equivalent chain sprocket for s.r.u drive rachet lock system. bearing housing. gear oil for gear box. m.s channels square bar round bar m.s pipe ( hollow type ) ( a ) 75mm dia ( b ) 150mm dia ( c ) 200mm dia ( d ) 250mm dia h. t. bolt ht nut, bolt & washer plummer block 06 mm thick chequired plate accessories forgear operated sluice valve. rubber insertion gland packing gland flange spl. type gland flange bolt nut thrust ball bearing gear box operating wheel gate hanging bracket flange socket tail piece flange collar tail piece...
37
Water Resources Department - Jharkhand
33946632 e quotation for supply of non scheduled item rate. cast iron stainless steel plate phosphorus bronze en 9 grade round bar single thrust ball bearing suitable for spindle dia. double thrust ball bearing suitable for spindle dia. musical note hollow type rubber ( teflon cladded ) solid musical note type rubber seal ( teflon claded ) musical note hollow type rubber ( plain ) solid musical note type rubber seal ( plain ) flat rubber seal wedge type rubber seal rubber seal jointing adhesive stainless steel counter shank nut, bolt & washer. diver coupling steel core wire rope ( construction 6x36 ) fiber core wire rope ( construction 6x36 ) worm gear box consisting of worm gear, worm shaft, upper & lower thrust heavy side roller gearing, spur gear. ( worm gear id to be made out of phosphorous bronze ) . industrial oxygen gas acetylene gas roller bearing chain pully hydra 14x coles crane ( 360 degree rotating ) brake shoe assembly with all accessories. wire rope u clamp cadmium compound grease rope socket rope thimble winch crab double reduction hoisting system including steel core wire rope of 18 mm diameter etc. rope drum hoisting system consisting of double rope drum with two stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. rope drum hoisting system consisting of single rope drum with single stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. gear box for hoisting system make radicon, greaves, premium or equivalent chain sprocket for s.r.u drive rachet lock system. bearing housing. gear oil for gear box. m.s channels square bar round bar m.s pipe ( hollow type ) ( a ) 75mm dia ( b ) 150mm dia ( c ) 200mm dia ( d ) 250mm dia h. t. bolt ht nut, bolt & washer plummer block 06 mm thick chequired plate rubber insertion gland packing gland flange spl. type gland flange bolt nut thrust ball bearing gear box operating wheel gate hanging bracket flange socket tail piece flange collar tail piece...
38
Water Resources Department - Jharkhand
33946605 supply of non scheduled item rate. 1 cast iron 2 stainless steel plate 3 4 5 phosphorus bronze 6 en 9 grade round bar 7 8 9 single thrust ball bearing suitable for spindle dia. 12 double thrust ball bearing suitable for spindle dia. 15 musical note hollow type rubber ( teflon cladded ) 16 17 solid musical note type rubber seal ( teflon claded ) 18 19 musical note hollow type rubber ( plain ) 21 solid musical note type rubber seal ( plain ) 22 23 flat rubber seal 26 wedge type rubber seal 29 rubber seal jointing adhesive 30 stainless steel counter shank nut, bolt & washer. 33 diver 34 35 coupling 36 steel core wire rope ( construction 6x36 ) 37 38 39 fiber core wire rope ( construction 6x36 ) 40 41 42 worm gear box consisting of worm gear, worm shaft, upper & lower thrust heavy side roller gearing, spur gear. ( worm gear id to be made out of phosphorous bronze ) . 46 industrial oxygen gas 48 acetylene gas 50 roller bearing 54 chain pully 56 hydra 14x 57 58 coles crane ( 360 degree rotating ) 60 brake shoe assembly with all accessories. 61 wire rope u clamp 62 cadmium compound 63 grease 64 rope socket 65 rope thimble 66 winch crab double reduction hoisting system including steel core wire rope of 18 mm diameter etc. 69 rope drum hoisting system consisting of double rope drum with two stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. 73 rope drum hoisting system consisting of single rope drum with single stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. 77 gear box for hoisting system make radicon, greaves, premium or equivalent 80 chain sprocket for s.r.u drive 81 rachet lock system. 82 bearing housing. 83 gear oil for gear box. 84 m.s channels 90 square bar 97 round bar 104 m.s pipe ( hollow type ) 105 ( a ) 75mm dia 108 ( b ) 150mm dia 111 ( c ) 200mm dia 114 ( d ) 250mm dia 117 h. t. bolt 123 ht nut, bolt & washer 129 plummer block 136 06 mm thick chequired plate 137 rubber insertion 140 gland packing 143 gland flange 146 spl. type gland flange bolt nut 149 thrust ball bearing 152 gear box operating wheel 155 gate hanging bracket 158 flange socket tail piece 161 flange collar tail piece...
39
National Rural Employment Programme - Jharkhand
33902255 tender for fabrication, transportation and supply of polygon high mast with single section of 3 mm thick of bottom of 155 mm and top 70 mm dia with bsen 10025 grade 355 jobs street plate o size 260 mm dia 16 mm thick with its accessories, mast shall be in single section for 9 mtrs mast shall be hot dip galvenised and suitable for wind velocity of 180 kmph 3 including head frame 2 point suspension system with steel rope 6 mm dia construction double drum winch/power tool power operating speed of 900 rpm and necessary cable trailer connection and single speed motor with m 24 * 800 mm foundation bolts of required quantity suitable for 6 luminaries with gls type aviation twin tamp all complete job....
40
Rural Development Department - Jharkhand
33894710 fabrication, transportation and supply of polygon high mast with single section of 3mm thick of bottom of155mm and top 70mm dia with bsen 10025 grades 355 job steet plate for shaft, is 2062 for base plate , having a base plate o size 260mm dia 16mm thick whit its accessories, mast shall be in single section for 9mtrs mast shall be hot dip galvanized and suitable for wind velocity of 180kmph as per is 875 part 3 including head frame 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 rpm and necessary cable trailer connection and single speed motor with m24x800mm foundation bolts of required quantity. suitable for 6 luminaires with gls type aviation twin tamp. all complete job as per direction of e/i foundation and erection charges with special t & p for 9.0mtrs long octagonal/ conical polo duly providing 4 nos. foundation bolts with nuts with providing of 0.67 mtrs x0.67 x 1.50 mtrs size m20cc work vibrated concreting mixing with necessary steel (20kg) reinforcement and courting for 7 days as directed by the field engineers during execution including excavation of earth /8 i all labour charges and cost conveyance of material etc. complete. all complete job as per direction of e/i 150 w led flood light 6 nos. ( c & s ) all complete job as per direction of e/i bulb manufacturing company: bajaj/orient/havels/usha wire manufacturing company: havels/finolex/anchor ...
41
East Central Railway - Jharkhand
33823722 supply of motorised winch machinemotorised winch machine,motorised winch machine capacity 07 ton with 3 phase induction motor of 10 h.p. motor make kirloskar, cgl,bbl. => limited...
42
Bharat Coking Coal Limited - Jharkhand
33681662 repairing of plate form and case of winch system of 24 / 96 dragline....
43
Jharkhand Silk Textile And Handicraft Development Corporation Limited - Jharkhand
33646303 supply, installation and commissioning of printing unit at bhagaiya, godda, jharkhand under mega handloom cluster, godda ( chcdc ) . , printing unit ( technical details ) at –bhagaiya ( godda ) , printing table ( textile fabricprinting table with ac top suitable to fix cloth for printingand clamp to fix screen as per screen.also must have the option to fix steam line , when needed.size : 20 ft / 5 ft / 3 ft ) . , rubber squeezer ( rubbersqueezer, 30cm, thickness : 9mm , width :50 mm, in different shape like plain , one side cut, v / u type, point cut etc., shore hardness : 60 / 65 ) . , cottage steamer ( steam pressureager ) ( steaming chamber for fixation of all type of reactive dyes after printing .fabric width upto 72 inch . heated double insulated wall, top and bottom steaming system , steam heating and temperature display through control panel, tem. 102 deg. cel. for reactive and acid dye. , steam supply through boiler. 30 kg capacity ) . , open width jigger ( semiautomatic jigger machine, roll width: 66 inch , roll centre : 21 inch , capacity : 150kg ( 100 gsm ) , batch dia: 800mm, structure of machine in c.i and ss tank for washing of printed fabric, main tank made of ss 316 , with supporting frame haing a ovel shape winch driven through direct shaft mounting gear motor, four set of tia bar to run the machine in rope form , electric heating element to take the temperature upto 75 deg. with temp. controller, chemical dozing tank with valve.capacity : 100 kg ) . , cylinder drying machine ( floatdrierfor printing ) ( float dryer to dry printed fabric by hot air.printed fabric will just floating between hot air cushions from top and bottom sides blown by high velocity fans. should be fully equipped with panels to dry printed fabric. all panels to be filled with glass wool that is keeping and avoiding the loss of heat without using any conveyor. cylinders should be of 22” dia face, width : 66 inch , should be fabricated from 16 to 10 swg of 304 or 316 quality stainless steel argon arc welded consisting m.s. dished end, suitable for 40 to 100 p.s.i. working pressure. must be provided with suitable steam inlet out let connection provided ) . , table top drier & hand drier ( table top drier for drying of printing inks after printing on table, roller type for free movement on table as per requirement , width of the drier :60 inch , length : 30 inch hand drier ( portable ) for drying of printing inks after printing ) . , heavyboiler ( fully automatic steam boiler ( ibr / non ibr ) , fuel : diesel / gas, builtwith seamless shell and seamless tube , low fuel consumption, boiler capacity : 500 kg, with proper insulation for maximum efficiency , water inline , drain line , water tank, fuel tank, electric connection from mcb , all to be done by supplier ) . , steam pipeline and condensate line ( steam pipeline and condensate pipeline with insulationfrom boiler to all related machines and allprinting table , dia. of pipe line will beas per machine req. with suitable valves ) . , screen lighting arrangement ( proper lighting arrangement to be done by supplier on 4 printing tablesfor proper view of printing ) . , wash room trolley ( frp trolleywith water drainage facility of length4ft / width 3 ft / height : 2 ft, wheel : 6 inch revolving facility for easy movement ) . , water tanks ( pvc water tank of various capacity , 10 ltr, 50 ltr, 100 ltr, 500 ltr, 1000 ltr, 2000 ltr ) . , brass vessels ( brass vessels of various capacityfor stirring and making printing dyes for printing : 100 ml, 250 ml, 500 ml, 1 ltr, 5 ltr, 10 ltr, 20 ltr ) . , dye paste stirrer ( suitable stirrer for chemical mixing inside the drum of any capacity from 20 ltr. to 210 ltr. , air motor driven with pressure regulator , flow regulating valve, works with variousrpm to avoid spillage, high torque motor for correct mixing and agitating ) . , spot removal guns ( textile stain cleaning spray spot gun , metal body, plastic tank, adjustable straight nozzle, with free additional nozzle and wonder trimmer .electrically operated ) . , weighing machine ( electronic weighing balance, electric as well as battery operated with callibration certificate . capacity : 300 gm, senstivity : .001 gm capacity : 5kg, senstivity : 1gm capacity : 50 kg, senstivity :100gm ) . , block printing machine detail , printing table ( textile fabricprinting table with ac top suitable to fix cloth for printingand clamp to fix screen as per screen.also must have the option to fix steam line , when needed.size : 20 ft / 5 ft / 3 ft ) . , blocks ( wooden blocks, best quality for block printing of sizes : 2 inch / 2 inch 3 inch / 3 inch 5 inch / 5 inch 6 inch / 6inch 8 inch / 8 inch ) . , blocks ( metal ( brass ) blocks, best quality for block printing of sizes : 2 inch / 2 inch 3 inch / 3 inch 5 inch / 5 inch 6 inch / 6inch 8 inch / 8 inch ) . , digital printing ( technical detail ) , digital textile printing machine – 6 colour head ( high speed direct to fabric digital textile printer to print directly on natural and synthetic fabric. with 6 color head , indutrial grade jetting assemblies , resolution : upto 1440 dpi, pressure purge and wiping cleaning method, ink can be reactive / disperse / pigment / acid , fabric upto 3 mm thickness can be print , maximum width of fabric : 1800 mm , fabric drying system : infrared heaters, high speed 2.0 printing interface , operating condition : 20 28 deg. celcius , relative humidity : 60 70% rh ) . , computer + software ( latest computer, next generation core i 5 ;suitableto rundigital printing machine and should be uploaded with required software for running digital printing machine ) . , printing unit , etp ( suitable effluent treatment plant to treat and discharge effluent of a fabric printingunit based on following capacities and characteristics. the total effluent generated wouldbe 20 m3 / day the effluent treatment plantisto be designed as it should be suitable to treat up to 20 m3 in maximum 10 hours treated effluent quality after primary treatment / clarification should be as follows: parameters values ph 6.5 to 7.5 bod ( 5 days ) maxbelow 30 ppm codbelow 250 ppm tssbelow 100 ppm colorclear transparence offer must include the following : a ) full civil work for installation of etp. b ) fulletp plant including all accessories , mechanincal , civil , electrical job c ) electric panelwork from meter to machine panel . d ) chemical and other spares for 15 days successful running of the machine ) . e ) full installation and training for 15 days to run the machine ) , laboratory ( a ) washing fastness tester ( iso ) to test the washing fastness after washing at designated temp. with grading scale set. b ) rubbing fastness tester : rubbing fastness tester to check fastness against rubbing ) . , generator 50 kva ( 50 kva , 440 volt dg set with base civil work station , chhaja for dg for safety with all electric connection ) . , computer ( intel core i5 ( sixth generation ) , 8gb ram, 500gb internal storage, 17 inch lcd monitor, wireless network adaptor , key board and mouse ) . , other required machines for digital printing machine but missing in dpr , padding process machine ( fabric coating or padding mangle with proper attachment ( mini stenter ) for pre process of padding of cotton / mixed / synthetic fabric for digital printing .72 inch roll width, 10 inch roll diameter, plaiting down and bog batching arrangement , heating : by gas / steam / electrical , a.c.drive, adjustable upto 10 ton pneumatic pressure suitable for padding fabric coating ( padding ) machine, width of machine : 10 ft, length of machine : 27 ft ) . , other required machines missing in dpr ( printing units ) , fabric inspection machine ( 70 inch fabric width, fabric inspection machine suitable for inspection of cotton and silk fabric , fabric roll to rollinput and output, 70 / 20 inch viewing glass with 2 way lighting arrangement for easy view and inspection, motorised variable speed upto 18 mtr / min, 1hp dc motor ) . , hydro extractor ( all s.s.body, silent vibration less operation, auto timing, auto dc break, safety precaution , capacity : 25 kg ) . , calendering machine ( textile calendering machine , 66 inch single roller calendering machine used to calendar cotton, chemical fiber, blend fabric, etc., single roller heating, heating medium can be either heater or steam operatedor gas operated with extra attachment as needed for silk or cottonfabrics, with full panel for reverse or forward movement .easy to work and install , low maintenance ) ....
44
Bharat Coking Coal Limited - Jharkhand
33637395 complete repairing of hoist gear winch brake assembly along with hoist pinion shaft assembly of ekg shovel sl.no. 468 at nakc ocp of govindpur area iii, bccl...
45
National Rural Employment Programme - Jharkhand
33620080 fixing of high mast light. fabrication, transportation and supply of polygon high mast with single section of 3mm thick of bottom of155mm and top 70mm dia with bsen 10025 grades 355 job street plate for shaft, is 2062 for base plate , having a base plate o size 260mm dia 16mm thick whit its accessories, mast shall be in single section for 9mtrs mast shall be hot dip galvanized and suitable for wind velocity of 180kmph as per is 875 part 3 including head frame 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 rpm and necessary cable trailer connection and single speed motor with m24x800mm foundation bolts of required quantity. suitable for 6 luminaires with gls type aviation twin tamp. all complete job as per direction of e/i. foundation and erection charges with special t & p for 9.0mtrs long octagonal/ conical polo duly providing 4 nos. foundation bolts with nuts with providing of 0.67 mtrs x0.67 x 1.50 mtrs size m20cc work vibrated concreting mixing with necessary steel (20kg) reinforcement and courting for 7 days as directed by the field engineers during execution including excavation of earth /8 i all labour charges and cost conveyance of material etc. complete. all complete job as per direction of e/i . 150 w led flood light 6 nos. ( c & s ) all complete job as per direction of e/i bulb manufacturing company: bajaj/orient/havel’s/usha wire manufacturing company: havel’s/finolex/anchor....
46
Steel Authority Of India Limited - Jharkhand
33592265 repair of vibrator, telpher and changing of rail of shuttle conveyor and structures & installation of brick elevator & mortar lifting winch during cat ii cr of bf #3...
47
Ministry Of Power - Jharkhand
33459241 bids are invited for purchase of winches for ntpc north karanpura thermal power ( schedule 1 to 3 ) 10 : m6313190500 winch: 5 ton 20 : m6313191000 winch: 10 ton 30 : m6518010038 winch reversing elect driven 3tontotal quantity : 7...
48
Bharat Coking Coal Limited - Jharkhand
33340582 replacement and damaged winding winch rope and leakage repairing of 170hp submersible pump delivery pipe govindpur area ...
49
Central Coalfields Limited - Jharkhand
33128304 repairing of winch system of crane, sl. no. 556 at akk ocp . ...
50
Central Coalfields Limited - Jharkhand
33020424 repairing of winch system of idm30 1315 of bokaro ocp...