Central Coalfields Limited - Jharkhand

29085779 repair and maintenance 440v, 5 wire r / m 440v, 5 wire oh line by replacing damaged rusted components as well as installation of astronomical time switch...

Building Construction Department - Jharkhand

28849171 quotations are invited through online for construction materials from reputed shop keepers, manufacturers, suppliers, retailers, distributors, timber merchants and others for following items 1 providing and fixing door shutter with wooden framed by 30mm thick both side best quality ply and veneer 4mm thick veneer of green décor make both side pasting finishing with melamine paint with all material and labour all complete ( including all fancy type fitting ) as per building specification and direction of e / i. 2 providing and fixing choukhat paneling with 12mm thick ply and 4 mm thick veneer both side pasting finishing with all material and labour all complete as per building specification and direction of e / i. 3 s / f / f all height wall paneling of 12mm thick water proof ply ( centure panic pine wood, isi mark, termites ) over 2x1 aluminum section, 4mm thick water proof veneer ( green dacore wood ) finishing with melamine polished all complete including all taxes and royalty all complete as per building specification and direction e / i 4 providing and laying machine cut, mirror polished italian marble stone flooring, in required design and in patterns in combination with italian marble stones of different colours, shades and finished surface texture of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 40 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with white cement slurry @ 4.4 kg / sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge 5 providing and applying plaster of patta paris over plastered surface to prepare the surface even and smooth complete. 6 supply fitting and fixing best quality wallpaper do complete job. 7 providing mellamine over new wooden surface to give desired texture and glossinculding wood filter with all labour and material all complete work as per instruction of e / i 8 providing and applying anti temite treatment wiyh all labour and material all complete work as per instruction of e / i 9 providing and laying app ( atactic polypropylene polymer ) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre / sqm by the same membrane manufacture of density at 25°c, 0.87 0.89 kg / litre and viscocity 70 160 cps. over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc, and preparing the surface complete. the vital physical and chemical parameters of the membrane shall be as under : joint strength in longitudinal and transverse direction at 23°c as 650 / 450n / 5cm. tear strength in longitudinal and transverse direction as 300 / 10 s / f / f cubical glass with dorma fitting as per direction e / i size 5 x 4 11 providing & fixing curtain of superior quality approved fabric material curtain & astar with rings , bukram , stiching charges making adequate plats fixing in prefixed curtain rod & power track as per direction of e / i curtain cloth make pure / dicitex / gmf 12 supply fitting & fixing shear all complete including all complete as per building specification and direction e / i 13 supply fitting & fixing bed. size ( 6.333 / 7.00 ) with 19 mm green plywith veneer and malamine polished including all complet job with nesesarry nail & hing.supply with head board sizd ( 8.75 / 4.00 ) with 19 mm green play , teak veneer, decorative type raxin steeching all complet job. 14 supply fitting& fixing side table size ( 1.33 / 1.33 ) with 19 mm green play drawer with veneer & malamine ploise all complet job. 15 supply fitting & fixing vip boss chair with teak wood frame with high quality leather, , with sleepwell foam do do all complete with malamine polish. 16 supply fitting fixing lunch / tea table size ( 29 x 1 2 x19 ) with 19 mm green play with veneer polished etc all complete job. 17 supply fitting fixing lcd cabint with matching to bed veneer polished etc all complete job. 18 supply fitting & fixing decorative type photo freaming with teak wood , desizne finished of size ( 43 x24 ) with matel artistical finished. 19 supplying and setting vip pillow size ( 27x17 ) with recron materials. 20 supplying and setting vip pillow cover with bed sheet of soft cloth. 21 supplying and setting vip blanket hypoallerjetic cloth with alovera gel size ( 93 x 73 ) 22 supplying and setting quilt / comforter double gsm white 100% cotton 23 s / f / f matteress make spring well quality 78x72x6 24 s / f / f dinning table eight seater complete made with teak wood, highly melamine polish with onyx italian marble top polish with polyurethene and chair ( high quality fabric ) 25 s / f / f center table size ( 48x48 inch ) with superior quality lamination inside and outside with italian marble top as per direction of e / i 26 s / f / f supplying of one seater premium sofa with febric finish , all complete as per direction of e / i 27 s / f / f supplying of 2 seater premium sofa with febric finish , all complete as per direction of e / i 28 s / f / f supplying of 3 seater premium sofa with febric finish , all complete as per direction of e / i 29 providing & fixing wardrobe with both side laminated inner lining and exterior fitted with hanging rod including all fittings like hing , lock , handal all e.t.c as per instruction of e / i 30 providing and laying 14mmthk fsc certified bamboo wooden flooring of size 125mmx1850mm. the planks shall be provided with tongue & groove required for locking. the flooring to be layer with 5mm underlay foam and 60 microns ldf film placed over it as moisture barrier to proper level with necessary edge profile & transition strip where ever necessary complete as per manufacturers instructions. the rate shall include cost and conveyance of all materials, labour charges, lead, lift, laying self leveling screed 3 5mm thk etc. all complete as specified and as directed by the engineering measurement of flooring will be the actual laid area including skirting and transition bands with the near by floor, skirting where ever applicable ) . 31 providing waterproof texture exterior work by asian paints design dholepur 32 s / f / f board wall partition with itching glass vertical standing position including all materials, labour , taxes all complete as per building specification and direction of e / i framing with wooden beat or 19mm thick centre make water proof ply board both side shuttering with 12 mm thick water proof centure ply veneer 4mm thick veneer of green décor make glass: 5mm thick saint gobine glass 33 supply, fitting, fixing and testing of dtreet light led lighting luminaire aerodynamically shaped single piece pressure die cast aluminum luminaire with high power leds as light source and electronic driver ( ip65 ) , along with 90 / 100w led lamp, as energy saving as per drawing prescribed reflector and heat resistant toughened flat glass cover, reflector and heat resistant toughened flat glass cover ( ip 65 ) and in compliance to iec safety standards. lm 79 and lm 80 reports to be submitted with all accessories. make: philips / trilux / jaguar / lighting technology. 34 supplying and fixing tpn sheet enclosure on surface or recess along with 25 / 32 amp 415 volts, , c curve, tp mcb complete with connections, testing and commissioning etc. as required. make ( legrand / l&t / siemens / schneider ) 35 supplying and fixing tpn sheet enclosure on surface or recess along with 63 amp 415 volts, , c curve, tp mcb complete with connections, testing and commissioning etc. as required. make ( legrand / l&t / siemens / schneider ) 36 supplying and fixing of modular type 25 ac unit box with on / off mcb on surface or in recess complete with connections, testing and commissioning etc. as required. ( to use for split ac ) make ( legrand / l&t / siemens / schneider ) 37 luminaires supplying and fixing recess mounted 18 watt led ( warm light ) ( 100 lm / w ) vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceiling including connection with 1.5 sq. mm fr pvc insulated copper conductor cable and earthing the body etc. as required. make : .trilux / lighting technology / philips / jaguar. 38 supplying and fixing single wall mounted 9 / 11 watt ( 2ft long ) led warm light ( 100 lm / w ) type batten fitting complete with electronic diver and led etc. directly on wall / ceiling including connections with 1.5 sq. mm fr pvc insulatted copper conductor and earthing the body etc. as requiered. ( to use as mirror light in toilets ) make : trilux / lighting technology / philips / jagaur. 39 suppling and fixing of recess / surface 23 / 24watt ( 1ftx1 ft ) led ( warm light ) 100lm / w, downlighter complete with electronic diver and led etc. directly on wall / ceiling including connections with 1.5 sq. mm fr pvc insulatted copper conductor and earthing the body etc. as requiered. ( to use in double height area ) make : trilux / lighting technology / philips / jagaur. 40 suppling and fixing of surface 15 / 18watt led downlighter ( warm light ) 100lm / w etc. directly on wall / ceiling including connections with 1.5 sq. mm fr pvc insulatted copper conductor and earthing the body etc. as requiered. make : trilux / lighting technology / philips / jagaur. 41 supplying and fixing 4 long 1x 40 watt or ( 2x20w ) suspended type led ( warm light ) ( 100 lm / w ) luminaire provides soft light and glare free symmetrical illumination complete with all accessories etc. including ball and socket arrangement, 2 no. down rods of 20mm dia x 1.6 mm thick g.i. pipe upto 30 cm. length, painting and wiring the down rods and connection with 1.5 sq mm fr pvc insulated copper conductor, single core cable and earthing etc. as required. make : .trilux / lighting technology / philips. / jaguar 42 supplying and fixing following watt led flood light luminaire with integral control gear, lenses, heat resistant toughened clear glass cover, with black powder coated aerodynamically shaped single piece pressure die cast aluminum luminaire with high power leds as light source and electronic driver ( ip65 ) , along with 120 led warm light, ( 4000k ) as energy saving as per drawing prescribed reflector and heat resistant toughened flat glass cover including connections with fr pvc insulated copper conductor cable and earthing the body along with all fixing accessories etc. as required, with proper iron clamps, nut bolts with washers etc. to fix on minimum 65 mm dia g.i. pipe in front of stage of auditorioum of museum as per direction of e / i or consultant as per drawing prescribed reflector and heat resistant toughened flat glass cover ( ip 65 ) and in compliance to iec safety standards. lm 79 and lm 80 reports to be submitted. make : trilux / lighting technology / philips / jagaur. 120 w led flood warm light ( 3000k ) 43 supplying and fixing surface mounted 10 / 12 watt led type bulk head e comprising of pressure die casr housing with acrylic diffuser ( ip65 ) and complete with integrated electronic driver etc. directly on wall / ceiling including connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc as required. make : trilux / lighting technology / philips / jagaur. 44 supplying and fixing 25 / 30 watt led type post top lantern suitable for garden / park / gate light complete with integrated electronic driver and all accessories including connection with pvc insulated copper conductor cable and earthing the body etc. as required and in compliance to iec safety standards. lm 79 and lm 80 reports to be submitted . make: philips / trilux / wipro. / lighting technology. 45 supplying and fixing of decorative wall bracket fixture in chromne finish with glass diffuser suitable for 2 x15 watt cfl / led lamp directly on wall including connection with 1.5 sq. mm fr pvc insulated copper conductor cable and earthing the body etc. as required. ( but without lamp ) make: philips / trilux / crompton / havells / jagaur.cost of decorative wall bracket fixture 46 supply of 15 watt led lamp. ( luminous flux 600lm, cct 6500k ( cool white ) , cri 80, rated voltage 220v / 240v. beam angle 120 degree, life 25000hrs. ) make: philips / trilux / havells / jagaur.tel. solution providing, fixing, connecting & testing of krone box ( telephone tag block ) in a thermoplastic, ip 65 ( weather proof ) enclosure, internally embedded gasket, anti corrosive, insulated and shock proof with provision for cable through ip 65 glands complete in all respects. ( make : matrix / alcatel / avaya. ( cost from gem ) 47 10 pair tag block ( krone box ) ( 136 mm x 253 mm x 115 mm ) 48 20 pair tag block ( krone box ) ( 136 mm x 253 mm x 115 mm ) 49 50 pair tag block ( krone box ) ( 300 mm x 300 mm x 70 mm ) providing, laying, connecting, testing & commissioning of multi core telephone un armoured cables of conductor size 0.5 sq.mm. annealed tinned electrolitic grade copper, pvc insulated, twisted pairs bunched together, over all pvc sheathed, gi strip or wire armouring laid on existing cable tray or along the wall or laid in pipes or in trenches including excavation of cable trench, sand filling covering with bricks and back filling complete as required. ( make : finolex / polycab / havells ) 50 10 pair pistl10pxo. 51008 51 20 pair 52 50 pair 53 supply and installation of digital telephone set with caller id system with connecting cord and jacks at user end. ( provision of id caller telephone for reception ) make: ( beetel / panasonic / orpat ) . 54 ip pbx system: supply, fitting, fixing, commissioning and testing of ip based 100% non blocking ip pabx system should be a ip compatible with rich feature set of the system and can be connected with pure voice over ip ( voip ) communication network across corporate local and wide area networks ( lan and wan ) as & when required. central processing unit: the system main software should be open architecture based. the cpu of main system shall be 32 bit processor working at 2.0 ghz or better. the system should be wall mountable. • system architecture should be latest pure ip and should be wall mountable meet me conference 30 party x 2 from day 1 must be available. must support unified communications equipped with 64 analog extensions 32 ip extensions alongwith ip user license loaded from day expandable upto 256 ip extensions, voip card in built charger, battery with one our back up facitity. 32 analog trunk ports, 1 pri , 02 ports auto attendant ipabx. make: avaya / nec / alacatel 9 u wall mount eqauipment rack 55 sitc of of 9u wall mounted networking cabinet 504.65x600x500 ( hxwxd ) : rack must be along with the following components like; width ( mm ) 600, depth ( mm ) 500, approx.net wt ( kg ) 20, crca d grade thickness ( mm ) 1.2, ral 9017 ( matt black ) , glass 4mm toughened tinted glass door, accessories:, cooling fan ( 230v a / c 90 cfm ) 2 nos, pdu 230vac 1 no, cable manager metal 2 nos, mounting hardware ( 20 sets of m6 screws, washer, cage nuts ( nickel coated ) ) 1 no, wall screws ( 4 sets of 2 screws, washer, rubber grommet ( nickel coated ) ) 1 no, door lock 1 no, front metal band 1 no. in the rack there must be maintained 1 u = 1.75 inches space. ( make : make : legrand valrack / netrack / rittal / schneider / ortronics or as approved by architect ) . ( for lan ) cost of wall mount 9 u network rack 56 surveillance ( cctv system ) sitc of 2 mp bullet varifocal ip ( ir ) indoor bullet camera ( 2.8 12mm lens ) ( matrix ) , 3 years warranty, day night type, 1 / 2.8progressive scan cmos, 1920 × 1080 at 25fps, 2.7 to 13.5 mm lens, 0.01 lux at f1.2, 0 lux with ir, icr, onvif ( profile s, profile g ) , support h.265, h.264, mjpeg, 120db wdr, 3d digital noise reduction, three individually configurable stream, 12 vdc & poe, ir range: 40m, support on board storage up to 128 gb ( sd card not included ) , alarm: 2 inputs & 2 outputs, audio: 1 input & 1 output, ip67, edge anlalytics line crossing detection, intrusion detection, scene change detection, motion detection, face detection, audio exception detection, video tampering, ul, fcc, ce certified. make axis / hikvision / pelco / honeywell or as appoved by architect / consultant. 57 sitc of matrix 2 mp ip mini dome indoor camera with 3.6 fixed lens, audio support, 3 years warranty, resolution d1 ( 704 x 480 pixel ) , hd ( 1280 x 720 pixel ) , full hd ( 1920 x 1080 pixel ) day night type, ( progressive scan cmos, 1920 × 1080 at 25fps, 2.7 to 13.5 mm lux at f1.2, 0 lux with ir, icr, onvif ( profile s, profile g ) , support h.265, h.264, mjpeg, 120db wdr, 3d digital noise reduction, three individually configurable stream, 12 vdc & poe, ir range: 40m, support on board storage up to 128 gb ( sd card not included ) , alarm: 2 inputs & 2 outputs, audio: 1 input & 1 output, ip67, edge anlalytics line crossing detection, intrusion detection, scene change detection, motion detection, face detection, audio exception detection, video tampering, ul, fcc, ce certified.make axis / hikvision / pelco / honeywell or as appoved by architect / consultant. 58 sitc of 2mp ir bullet fixed camera 1 / 2.8progressive scan cmos, 1920 × 1080 at 25fps, 2.8 mm fixed lens, 0.01 lux at f1.2, 0 lux with ir, icr, onvif ( profile s, profile g ) , support h.265, h.264, mjpeg, 120db wdr, 3d digital noise reduction, three individually configurable stream, 12 vdc & poe, ir range: 40m, support on board storage up to 128 gb ( sd card not included ) , ip67, edge anlalytics line crossing detection, intrusion detection, motion detection, scene change detection, video tampering, ul, ce, fcc certified. make axis / hikvision / pelco or as appoved by architect / consultant. 59 sitc of 32 ch nvr with 32 tb storage ( sparsh ) ( sparsh & sr nv32f608 he ) connect up to 32 ip support cameras, 2 u rack mounting confrigation dual os design, up to 12 megapixels resolution, 2 hdmi output with one atleast at 4k ( 4096×2160 ) , 1 vga output with 2mp resolution, support h.265 / mjpeg, incoming bandwidth 500 mbps, 8 sata hard disks, anr technology, 16 sata interfaces for 8 hdds and capacity of each hdd upto 8 tb, front panel: 1 × usb 2.0 rear panel: 2 × usb 3.0, alarm i / o 16 / 4, rs 485, 4 rj 45 10 / 100 / 1000 mbps self adaptive ethernet interface, multiple network monitoring: web viewer, ce, fcc, ul certified with survelliance sd crad , with 8 tb storage ( inclusive of 8 tb surveillance hard disk: 4 nos. ) make axis / hikvision / pelco or as appoved by architect / consultant. 60 6 u wall mount equipment rack sitc of of 6u wall mounted networking cabinet 504.65x600x500 ( hxwxd ) : rack must be along with the following components like; width ( mm ) 600, depth ( mm ) 500, approx.net wt ( kg ) 10 12, crca d grade thickness ( mm ) 1.2, ral 9017 ( matt black ) , glass 4mm toughened tinted glass door, accessories:, cooling fan ( 230v a / c 90 cfm ) 2 nos, pdu 230vac 1 no, cable manager metal 2 nos, mounting hardware ( 20 sets of m6 screws, washer, cage nuts ( nickel coated ) ) 1 no, wall screws ( 4 sets of 2 screws, washer, rubber grommet ( nickel coated ) ) 1 no, door lock 1 no, front metal band 1 no. in the rack there must be maintained 1 u = 1.75 inches space. ( make : make : legrand valrack / netrack / rittal / schneider / ortronics or as approved by architect ) . 61 sitc of 43 lcd 24x7 surveillance monitor ( ( smart tv ) . make lg / samsung or as appoved by architect / consultant. make: sony, lg, panasonic t, v. set 62 sitc of 55 full hd 1080p led tv.; firstouch smart television tv 55inch led backlit lcd , resolution ( pixels ) ( 3840x2160 ) uhd, screen size 55 , smart tv, details of accessories ( included in the scope ofsupply ) : remote control, connecting cable, batteries, dimensions ( length xbreadth x depth ) 52” x 1.2” x 31.4. wall mount. power consumption 138 watt. wifi direct, built in wifi. make soni / lg, / samsung / panasonic. cost of 55 full hd led panel tv ( cost without gst ) 63 electrical appainces refrigerator supply, fitting, fixing and testing of eie 220 l 3 star direct cool double door refrigerator ( eie ) refrigerator is:1476 latest for direct cool with following specifictions: ( make: sansui / samsung / haier / lg / kelvinator. capacity: 220 lit. power requirement: 220 240 v, 50 hz insulation: puff eco friendly refrigerant compressor type: power saver compressor defrosting type: direct cool type: single door built in stabilizer: yes warranty: 1 year cost of refrigerator 220 lit. 64 supply, fitting, fixing and testing of liebherr 420 l 2 star frost freedouble door refrigerator ( liebherr ) ( tdcs 4740 ) refrigerator conformity to indian standrad : is:15750 ( 2006 ) for frost free latest for direct cool with following specifictions: . ( make: sansui / samsung / haier / lg / kelvinator ) capacity: 420 lit. power requirement: 220 240 v, 50 hz insulation: puff eco friendly refrigerant compressor type: power saver compressor defrosting type: direct cool type: single door built in stabilizer: yes warranty: 1 year cost of refrigerator 420 lit. 65 supply, fitting, fixing and testing of 3 star direct cool single door refrigerator is:1476 latest for direct cool with following specifictions: . make: sansui / samsung / haier / lg / kelvinator capacity: 80 lit. power consumption: 289 kwh / yhr power requirement: 220 240 v, 50 hz insulation: puff eco friendly refrigerant compressor type: power saver compressor defrosting type: direct cool type: single door built in stabilizer: yes warranty: 1 year total cost of refrigerator. 66 supply, fitting, fixing and testing of microwave oven 900 w 5 star rating 23 l along with the microwave oven will automatically protect you in the offset of an accident and facilities with timer, preheat, defrost, reheat, convection heating, touch contol pannel, adjustment of microwave power, conformity to indianstandard is 11676, heatingchamber stainless steel, along with all accessories & 1 year warranty. make: godrej gmx 25ca1 miz / samsung ce1041dsb2 / haier / lg. 6 kva ups 67 supply, fitting, fixing, testing and installation of 6.0 kva, technology igbt pwm withoutinbuilt isolationtransformer, input power single phase 160v 260v sinewave, 50hz & single phase 230v output on line ups system with 12v / 26 ah sealed maintenance free batteries backup protection for 90 minutes and all accessories as required of reputed make ups. with 46 nos. 26ah, 12v battery. make: apc / emerson / numeric. details of ups : technology : micro processor based controls, true online, double convertion type, should have cold start facility. overall efficiency :> 90% isolation ; built in isolation transformer at the output of ups system. charger : should have built in charger of minimum 10 amp. back up time : 90 min. with smf batteries. vah required : minimum 14352 for 6 kva ( 26h x 46 n0s.x 12v ) = 14352vah ) display : should have lcd display with event logging facility. upgradeability : should have upgradable to work as parrallel redundent ups in load sharing mode. shoftwere comunication : should have snmp ( simple network management protocol ) compatability ( optional ) . input current harmonic shall be less than 3% with the application of igbt ( insulated gate bypolar transistor ) best rectifier, but 6 / 12 pulse is not applicable. sealed maintenance free smf batteries for 6kva ups for 90 mins. backup with open type cabinate for installation of batteries and their respective battery leads copper cables / buslinks between batteries, copper cables between ups & batteries, with dc mccb box and required capacity of mccb. make : global yuasa / exide / uplus / hbl cost of sealed maintenance free smf batteries with stand with 6kva ups. 68 water purifire supply , fitting fixing and commissioning of indian water inc. pure waterfor life fully automatic with autocut off ro potable waterpuri 2000 plus 25 litre ro+uv+uf water purifier electrically oparated • purification technology ro+uv+uf• capacity 25 litre • filter pre filter ( optional ) , sediment filter, activated carbon filter, anti scalant filter, post uf filter, • membrane type 80 gpd, • power features • power requirement 110v 300v, 50 hz, • operating voltage 24v dc v along with all required accessories, like, connecting wires, pipes, stand and fixing euipments along with drain pipe in put pipe and etc as required. make aquagard, voltas, kent.cost of water purifire indian water inc. pure waterfor life 2000 plus 25 litre ro+uv+uf water purifier electrically oparated • purification technologyro+uv+uf• capacity 25 litre • 69 1.5 ton 5 star split ac supply , fitting, fixing and testing of 1.5 ton 5 star high wall split ac ( cooling only ) unit of bee 5 star rating, etc as required. make: hitachi / daikin / carrier mitsubishi. 3 ton 4 star cassette ac 70 supply, fitting, fixing and testing of 3 ton 4 star ceiling mounted ( cassette ac cooling ( hdum100cr s / hdc100cr 5 ) ) unit of bee 4 star rating, etc as required. make: hitachi / daikin / carrier. mitsubishi. 4 ton 4 star cassette ac 71 supply, fitting, fixing and testing of 4 ton 4 star ceiling mounted ( cassette ac cooling r410a ) ) unit of bee 4 star rating, etc as required. make: hitachi / daikin / carrier. mitsubishi. 72 installation charge of cassette ac 73 copper pipe with insulation 74 hard pvc drain pipe 75 4 core 4sqmm copper cable 76 bracket for outdoor unit of ac 77 led cove linea plus ( strip ) sitc of 5 mtr set led cove linea plus ( warm light ) led 25 w tape with driver ( blue or yellow in colour ) easy to install, maintain and comes with suitable driver energy saving strip tape light ( 3000 / 4000 ) base & lamp . for architectural: accent , good protection against water and dust ingress and impact, with all accessories. ( indoor application ) make make: philips / equivallent in trilux / jaguar / lighting technology track light 78 supply, installation, testing and commisning of 26 / 30w track mounted accent lighting luminaire with compact housing and slim gear box with color rendering index of 90 for architectural: accent , good protection against water and dust ingress and impact, led track with option of one meter track. make: philips flex acent g 2, st391t led20 / 930 psu e nb 1c wh in / equivallent in trilux / jaguar / ( 3000 / 4000k ) track integral bollards: 79 providing, fitting, fixing and testing of bollard light decorative luminaire light fixture of 800mm in length ( ip 65 ) 9 / 10 w led lamp available in cct of 3000k / 4000k with integrated baseplate and driver for easy installation, operating voltage of 220 240 v, wide beam optics and transluscent diffuser tube. the fixture should have extruded aluminium housing and heat resistant silicone rubber gasket, operating temperature ranging from 20° c to 40°c, the fixture should have ip65 protection and ik10 impact resistance. driver shall be high efficiency having efficiency > 85% and in compliance to iec standards. with foundation, commissioning, testing all with all other accessories as per drawing provided at the time of work execution or as per the direction of e / i ) make philips bcp150 led150 / nw psu 220 240v 7043 9w / trilux dtindlbled 800 840et 10w / jaguar / lighting technology / havells cost of bollard light fixture with 9w led lamp cost of terminal box ( size 8 x 6 x 4 ) of 2 mm crca sheet steel powder coating with locking arrangement and rubber gasket etc. 2a sp mcb make l&t, hager, legrand 2 nos. stud type 4 studs 20a connector ( 1 no. for incomer and 2nd for outgoing cable ) total cost of bollard light with all above accessories. 80 step light ( out door application ) sitc of step light ( warm light ) robust design led 4 w step light is ip67 / ik10, easy to install, maintain and comes with suitable mounting box, energy saving step light grey clour packed with features applications ( 3000 / 4000k0 . for architectural: accent , good protection against water and dust ingress and impact, with all accessories. ( steps of open air theater out door application ) make make: philips bwg150 led50 / nw psu 220 240v ip67 7043 / trilux / jaguar / lighting technology / havells. 81 garden spike light ( out door application ) supply, installation, testing and commisning of 12w led garden spike light ( cob integrated lighting ) solution lighting family for architectural: accent , good protection against water and dust ingress and impact, with all accessories. ( ip 67 out door application ) make: philips / trilux / jaguar / lighting technology / havells. 82 supply, fitting, fixing of wall mount suitable capacity ( 4 kva ) automatic voltage stabilizer, voltage range 130v to 280v of copper wound transformer along with suitable size of connecting 3 mtr 3 core 2.5 sq. mm flexible copper cable ( indoor unit to stabilizer ) make v guard / totaline / sen & pandit. 83 25a 2 / 3 module switch and socket ( for geyser ) : supplying fixing and testing of 25 amps 240 volts 2 / 3 module separate switch and socket in existing g.i.box with front plate in recess, for the switch and with indicator, socket outlet to be installed in different locations as shown in drawing and complete with connections, testing and commissioning etc. as required. make: legrand ( arteor ) / schneider ( zencelo ) / mk ( blenz ) suppy of electric kattle along with all accessories and following specifications: . capacity: 1.7 / 1.8 lit. consume: 1800 2200w suitable for tea, water & soups. auto switch off facility body type: metal body stainless type warrenty: 2 year make: philips / bajaj / havells cost of electric kattle 84 electronic hooter: supplying, installation, testing and commissioning of duel tone electronic hooter suitable for wall mounted complete as required. 85 main lt panel supply, designing, unloading , shifting to location, manufacturing and effecting proper connection installation, testing and commissioning of all incomer and outgoing of lt panel fabricated out 2 mm ( 14 swg ) crca sheet steel dust, damp and vermin proof ( ip 42 ) free floor standing factory built sheet steel enclosed modular construction extendable panel, suitable for operatrion on 415 + 10% volts, 50 hz ac 3 phase 4 wire system, hinged doors of 2mm thick crca sheet, duly painted ( powder coated ) complete with aluminium bus bars, interconnection with frls pvc copper wire, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per drawing and technical specifications attached etc. complete as required. the sheet steel under go minimum 7 tanks treatment followed by finishing of powder coating of minimum 60 micron thickness, duly compartmentalized having accessories mounted inside the cubical panel, earthing with 2 nos. earth studs. the panels shall be preferably arranged in multitier formation. these shall be of adequate size with a provision of 10 percent vacant space to accommodate future additional switch gear in addition to spare feeders presently provided. the size of the panel shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component do not attain temperature rise more than 40 degree celsius. location : in panel room. the name plate for each feeder must be in anodized aluminium sheet. panel size as per drawing and shall be provided at the time of work order. al. bus bar the panel includes 415v, 400 a, 3ph, 36ka, 50hz electrolytic aluminium bus bar ( e91ewp ) aluminium earth bus with removable glands plates, cable glands at sending and receiving ends, including connection with outgoing feeders complete in all respects. the electrolytic aluminium bus bar of grade 63401 wp as per i:s 5082 of suitable length and insulated by heat shrinkable sleeves red, yellow, blue and black as r y b & n. the current density of bus bar shall be minimum 0.8 a / sq mm. minimum clearance between live parts / neutral to earth shall be 19mm. however clearances between terminals at components shall be as per applicable individual standard for components. interconnections between the main bus bars and individual units shall be made with 2.5, 4, 6 & 10 sq mm frls pvc cu. wire with 35 & 63mm 4 studs ( brass ) treminal blocks, aluminium bus bars of adequate rating. al. bus bar will be supported on insulators made of non hygroscopic, non inflammable material with tracking index equal to or more than that defined in bis contractor will provide shop drawing sld & ga drawing along with bom with cat. no. of each and every components and switch gears of lt panel for approval of consultant. inspection of the lt panel shall be carried out at panel builders factory by the consultant before final delivery for that all arrangements shall be made by the contractor. all 4 pole mccb with thermomagnetic based release must have follwing characterstics: 1. icu=100% ics. 2. with positive isolation marked. 3. with adjustable short circuit and over load. 4. as per iec 60947 2. make of mccb l&t d sine / legrand dpx³ / schneider nsx / siemens 3vl. make of mcb ( 10ka c series. ) l&t u version / legrand dx³ / schneider acti / siemens. bill of material of main lt panel: 1 set of fabrication part of lt panel & busbar system, in crca sheet steel enclosure ( ip 42 / 43 ) without any components & its busbar system, in crca sheet steel enclosure without any components. name of panel builder : jmd electrotech, kokar, arnav poertech, tatisilway, tts systematix private ltd, tatisiway, meditron, meshra, ranchi or any approved panel builders of above make switch gears. indicating 1 sets multifunction meter having led display accuracy class 1 as per iec 62053 21, rs 485 port, ( ethernet / modbus ready suitable for monitoring and control with bms system ) in built rtc, aux supply: 44 277vac / dc. parameters: volts, amps, pf, thd, f, w, wh, va, vah, var, varh, runhrs, onhrs interrupts, thd for v&i per phase, individual harmonics for v&i upto 15th level complying with iec61557 12. min / max for eight parameters. sampling rate: 64 samples per cycle. make schneider / satec / siemnes 3 nos. ct of 400 / 5va 5 class one epoxy resin cast ct ( 3 nos. ) =1 set. make: kappa / matrix 3 sets phase indicating light shall be protected by 2 amps sp mcbs for incomer & outgoing.make l& t / ae / schneider. interlocking provision of mechnical interlocking between 400a / fp / 36ka mccb as common incoming and 1 no. of 400a on load change over for d.g incomer, in such a way so that the two supplies are not parallel at any time. incomer : 1 no. 400a fp / 36ka / mccb with adjustable thermomagnetic release type with s / c & o / l protection with with front rotary handle type with spreader links with on off trip indication. ( incoming cable size –1 run 300sq mm 3.5 core al. ar. cable ) . 1 no. 400a tpn on load change over panel mounted open execution typesuitable arrangement for terminal of al. cable out going 1 no. 250a fp mccb ( 25ka ) with adjustable thermomagnetic release type with s / c & o / l protection with front rotary handle type with spreader links with on off trip indication. ( to lt panel of residence ) . ( cable size 1 run, 120 sq. mm. 3.5 core al ar. cable ) 1 no. 200a fp mccb ( 25ka ) with adjustable thermomagnetic release type with s / c & o / l protection with with front rotary handle type with spreader links with on off trip indication. ( for 1 no. for lt panel of office ) cable size 1 run, 120 sq. mm. 3.5 core al ar. cable ) 5 nos. 63 a fp mccb ( 25ka ) with adjustable thermomagnetic release type with s / c & o / l protection with front rotary handle type with spreader links. with on off trip indication. ( 2 no. for out door feeder pillar panels, 1 no. for tpn db out house, 2 nos. as spare ) 4 nos.25a / fp / 25ka / mccb thermomagnetic release type, on of trip and s / c , o / l protection, on off indication with rotary handle & spreader links. ( 1no. for pump motor, 2 nos. as future use and 1 no as spare ) 2 nos. 32a 10 ka, dp mcb c series 2 nos. 63a 10 ka, dp mcb c series total cost of main lt panel lt panel residence 86 supply, designing, unloading, shifting to location, manufacturing and effecting proper connection installation, testing and commissioning of all incomer and outgoing of lt panel fabricated out 2 mm ( 14 swg ) crca sheet steel dust, damp and vermin proof ( ip 42 ) wall mounting factory built sheet steel enclosed modular construction extendable panel, suitable for operatrion on 415 + 10% volts, 50 hz ac 3 phase 4 wire system, hinged doors of 2mm thick crca sheet, duly painted ( powder coated ) complete with aluminium bus bars, interconnection with frls pvc copper wire, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per drawing and technical specifications attached etc. complete as required. 87 the sheet steel under go minimum 7 tanks treatment followed by finishing of powder coating of minimum 60 micron thickness, duly compartmentalized having accessories mounted inside the cubical panel, earthing with 2 nos. earth studs. the panels shall be preferably arranged in multitier formation. these shall be of adequate size with a provision of 10 percent vacant space to accommodate future additional switch gear in addition to spare feeders presently provided. the size of the panel shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component do not attain temperature rise more than 40 degree celsius. location : suitable location the name plate for each feeder must be in anodized aluminium sheet. panel size as per drawing and shall be provided at the time of work order. al. bus bar the panel includes 415v, 300 a, 3ph, 25ka, 50hz electrolytic aluminium bus bar ( e91ewp ) aluminium earth bus with removable glands plates, cable glands at sending and receiving ends, including connection with outgoing feeders complete in all respects. the electrolytic aluminium bus bar of grade 63401 wp as per i:s 5082 of suitable length and insulated by heat shrinkable sleeves red, yellow, blue and black as r y b & n. the current density of bus bar shall be minimum 0.8 a / sq mm. minimum clearance between live parts / neutral to earth shall be 19mm. however clearances between terminals at components shall be as per applicable individual standard for components. interconnections between the main bus bars and individual units shall be made with 2.5, 4, 6 & 10 sq mm frls pvc cu. wire with 35 & 63mm 4 studs ( brass ) treminal blocks, aluminium bus bars of adequate rating. al. bus bar will be supported on insulators made of non hygroscopic, non inflammable material with tracking index equal to or more than that defined in bis contractor will provide shop drawing sld & ga drawing along with bom with cat. no. of each and every components and switch gears of lt panel for approval of consultant. inspection of the lt panel shall be carried out at panel builders factory by the consultant before final delivery for that all arrangements shall be made by the contractor. all 4 pole mccb with thermomagnetic based release must have follwing characterstics: 1. icu=100% ics. 2. with positive isolation marked. 3. with adjustable short circuit and over load. 4. as per iec 60947 2. make of mccb l&t d sine / legrand dpx³ / schneider nsx / siemens 3vl. make of mcb ( 10ka c series. ) l&t u version / legrand dx³ / schneider acti / siemens. bill of material of main lt panel: 1 set of fabrication part of lt panel & busbar system, in crca sheet steel enclosure ( ip 42 / 43 ) without any components & its busbar system, in crca sheet steel enclosure without any components. name of panel builder : jmd electrotech, kokar, arnav poertech, tatisilway, tts systematix private ltd, tatisiway, meditron, meshra, ranchi or any approved panel builders of above make switch gears. indicating 1 sets multifunction meter having led display accuracy class 1 as per iec 62053 21, rs 485 port, ( ethernet / modbus ready suitable for monitoring and control with bms system ) in built rtc, aux supply: 44 277vac / dc. parameters: volts, amps, pf, thd, f, w, wh, va, vah, var, varh, runhrs, onhrs interrupts, thd for v&i per phase, individual harmonics for v&i upto 15th level complying with iec61557 12. min / max for eight parameters. sampling rate: 64 samples per cycle. make schneider / satec / siemnes 3 nos. ct of 300 / 5va 5 class one epoxy resin cast ct ( 3 nos. ) =1 set. make: kappa / matrix 3 sets phase indicating light shall be protected by 2 amps sp mcbs for incomer & outgoing.make l& t. / ae / schneider. incomer : 1 no. 250a fp / 25ka / mccb with adjustable thermomagnetic release type with s / c & o / l protection with front rotary handle and spreader links with on off trip indication. ( incoming cable size –1 run 120sq mm 3.5 core al. ar. cable ) . out going 7 nos. 63 a fp mcb 10ka c series . ( 3nos. for power db, 2 nos. as future use & 2 nos. as spare ) 4 nos. 32 a fp mcb 10ka c series . ( 4 nos. for cassette units and 1 no. as spare ) 5 nos. 25a fp mcb, 10ka c series . ( 3 nos. for ldb db, 1 nos. as spare ) 4 nos. 32a 10 ka, dp mcb c series 4 nos. 63a 10 ka, dp mcb c series total cost of lt. panel ( b ) feeder pillar panel ( canopy type ) : 88 supplying, designing, unloading, shifting to location, manufacturing installation, testing and commissioning in correct alignment position, effecting proper connection of all incomer and outgoing of double door canopy type feeder pillar panel for external lighting of 14 swg crca sheet ( 2 mm ) steel ip – 54 floor mounting cubical type lt panel in canopy shape suitable for operation on 415v, 50hz, 3 ph. ac supply and fault level 25 ka with front operated construction including separate fabrication arrangement for fixing m.c.c.b. the sheet steel under go minimum 7 tanks treatment followed by finishing powder coating of minimum 60 micron thickness duly compartmentalized with locking arrangement duly fixed on base channel size – 50 mm x 50 mm x 4 mm having accessories mounted inside the cubical panel, earthing with 2 nos. earth studs. the panel shall have type test certificates with short circuit and ip protection ( c.p.r.i. test ) . detail drawings and sld shall be provided at the time of work order. all openings shall be covered by soft rubber gasket, enclosure shall be galvanized. panel shall have suitable cable entry from bottom and suitable arrangement for multi runs aluminum cables for all mccb. the panel shall have type test certificates with short circuit and ip protection ( c.p.r.i. test ) aluminum bus bar for panel : bus bar shall be suitable for 100a, tpn busbar chamber of suitable length with ( e91ewp ) eletrolytic aluminum busbars. all busbars and interconnections shall be of suitable size aluminum busbar, current density of aluminum shall not be more than 0.8 amps / sq.mm cross sectional area of bus bar with removel gland plates, cable glands, at sending and receiving ends, encluding connections with outgoing feeders complete in all respect and all interconnections shall be made with 2.5, 4 and 6 sq.mm. pvc cu.wire. cost of enclosure with al bus bar, connection pvc wires, etc. the aluminium bus bar shall be with heat shrinkable pvc slived red, yellow, blue & black as ( ryb & n ) after temperature and incloser derating maximum allowable temp.of bus bar shall be 90 degree c. sld will be submitted by the contractor for approval to engineering incharge / consultant before submitting the apafcr panel drawing. based on approved sld, contractor will provide the ga drawing of external feeder pillar panel. inspection of the external feeder pillar panel shall be carried out at panel builders factory by the consultant before final delivery. 1 set of fabrication part of feeder pillar lt panel & busbar system, in crca sheet steel enclosure ( ip 42 / 43 ) without any components & its busbar system, in crca sheet steel enclosure without any components. name of panel builder : jmd electrotech, kokar, arnav poertech, tatisilway, tts systematix private ltd, tatisiway, meditron, meshra, ranchi or any approved panel builders of above make switch gears. the panel builder shall have type test certificates with short circuit and ip protection ( c.p.r.i. approved ) make of mccb l &t d shine. / legrand dpx³ / schneider nsx / siemens 3vl / equivallent in abb location : in campus bill of material in external feeder pillar panel : incomer: 1 no. 63a / fp / 25ka / mccb thermomagnetic release type with rotary handle & spreader links with on off trip indication. 3 set of ct 100 / 5va 5 class one epoxy resin cast ct ( 3 nos. ) =1 set. make matrix / kappa / l&t 1 set of analogue am meter ( 0 – 100a ) 96mmx96mm 4 position with selector switch for incomer. make l& t. / ae / schneider. make kaycee / l&t / schneider. 1 set of analogue voltmeter ( 0 – 500v ) 96mmx96mm with 4 position selector switch for incomer. make l& t. / ae / schneider. make kaycee / l&t / schneider. 3 sets of phase indicating light shall be protected by 2 amps sp mcbs for incomer.make l& t. / ae / schneider. out going 3 sets 25a / fp / 25ka / mccb adjustable thermomagnetic release type, and s / c , o / l protection, with rotary handle & spreader links. with on off trip indication. ( 2 no . for external lighting and 1 no. as spare ) 2 nos. 4 pole 25 a power contactor no nc of three phase of suitable rating. make: l&t / siemens / legrand 2 nos. single channel digital time switch. make: alpha rex 3 – cat no. ( d21 astro, 1 channel. ) 412654 2 nos. four pole two way lexic changeover with centre off 440v ac 32 to 40a to be used in case of timer failure to by pass the timer. ( legrand cat no. 604022 ) total cost of feeder pillar panel for external lighting copper cable for outdoor units 89 supply of following size of 1.1kv xlpe / pvc insulated / pvc sheathed ( heavy duty ) unarmoured electric cable with copper conductor as per is 7098 ( part 1 ) 1988 with upto date amendments. make: havells. polycab. kei, gloster. supply of 4 core 10 sq. mm. xlpe pvc cu. / unarmoured cable 1.1ar. cable telephone system accessories for matv network system 90 supply, erection, testing and commissioning of splitter / tap off mounted in suitable sizes ms boxes for matv system and shall be suitable for interactive system.two way ( s 2 ) 91 four way ( s 4 ) 92 two way tap off ( t2 ) 93 four way tap off ( t4 ) active components: l2 poe access switch 94 supply, fitting, fixing, connecting and testing of switch with 24 x 10 / 100 / 1000t poe ports and 4 x 100 / 1000x sfp ports, switching capacity 56gbps and forwarding rate 41.7mpps, switch should support poe and poe+ with 370w minimum power budget, operaating temperature 0°c to 50°c, switch should support link reccovery within 50ms for ring architecture, sdn or similar kind of technolgy should support, warranty 5 year from day 1 . make: cisco ws c2960x 24ps l / allied telesis at x230 28gp / hp / juniper ex2200 24p ) the above l2 managed data switch consists of the following: 1. power cord india, right angle. 2. both side cable connector. 3. 1 year free service pack. interface 24 x 10 / 100 / 1000t ports and 4 x 100 / 1000x sfp ports switching capacity / forwarding rate : 56gbps / 41.7mpps performance: up to 16k mac addresses, 256mb ddr sdram management: console port, gui, telnet, ssh, snmpv1, 2 and 3, powerful centralized management and zero touch device installation and recovery like sdn, security: console port, gui, telnet, ssh, snmpv1, 2 and 3, powerful centralized management and zero touch device installation and recovery like sdn, routing: ipv4 static routing and rip. fail over: switch capable of recovery within 50ms in a ring for application high availability ipv6: device management over ipv6 networks with snmpv6, telnetv6, sshv6 and syslogv6 diagnostic: optical digital diagnostics monitoring, automatic link flap detection and port shutdown, port and vlan mirroring ( rspan ) standard protocol: ieee 802.1q, ieee 802.1w, ieee 802.1s, ieee 802.1p, ieee 802.1ab, ieee 802.1ax, ieee 802.3ad operating temparature: 0°c to 50°c certification: en, ul and rohs warranty: 5 years. cost of l2 managed data switch fiber module 95 providing, fixing, connecting & testing of gigabit fiber module mm, support up to 550mtr ( make: cisco glc sx mmd / allied telesis at spsx / juniper ctp sfp 1ge sx / hp ) router / utm 96 supply, fitting, fixing and testing of utm / router with lan: 2 x 1000x sfp / 2 x 10 / 100 / 1000t rj 45 combo, wan: 2 x 1000x sfp / 2 x 10 / 100 / 1000t rj 45 combo , ha: 2 x 10 / 100 / 1000t rj 45, should support url filtering, dos and ddos attack detection and protection, antivirus, malware protection, static, dynamic ( bgp4, ospf, ripv1 / v2 ) , source based routing, policy based routing and igmpv1 / v2 / v3. warranty 5 year from day 1 ( cisco asa 5516 x with fire power services / allied telesis at ar3050s / juniper srx300 / hp ) the above router consists of the following: cisco 2901 ac power supply ( pwr 2901 ac ) ac power cord ( india, south africa ) , c13, bs 546, 1.8m blank faceplate for hwic slot on cisco isr cisco config pro express on router flash 512mb dram for cisco 2901 2921 isr ( default ) 256mb compact flash for cisco 1900, 2900, 3900 isr ip base license  for cisco 2901 2951 cisco 2901 2921 ios universal 2 port serial wan interface card security license  for cisco 2901 2951 1 year free service pack interface: lan: 2 x 1000x sfp / 2 x 10 / 100 / 1000t rj 45 combo wan: 2 x 1000x sfp / 2 x 10 / 100 / 1000t rj 45 combo ha: 2 x 10 / 100 / 1000t rj 45 processor and memory: 800mhz dual core, 1gb ( ram ) , 4gb ( flash ) firewall / utm ( unified threat manager ) : deep packet inspection, bandwidth limiting control for applications, bridging between lan and wan interfaces, data leakage prevention, url filtering, dos and ddos attack detection and protection, antivirus, malware protection, ( intrusion detection system ) , ips ( inclusion prevention system ) antivirous, anti spywire with 3 yrs subscription. this equipment will also protect & prevent outsider or visitors who are not assined in the existing network i, e office network system can not availed by any otsiders or they can not curropt the network system. ( for active & passive mode ) routing and multicasting: static, dynamic ( bgp4, ospf, ripv1 / v2 ) , source based routing, policy based routing and igmpv1 / v2 / v3 nat: static, ipsec traversal, dynamic napt. high availability: vrrp, vrrpv3 management & authentication: web based gui, industry standard cli, snmpv2 & v3, radius, tacacs+, internal user database, web authentication warranty: 5 years on hardware. cost of router / utm access point 97 supply, fitting, fixing, connecting and testing of wireless access point with ieee 802.11ac dual band radio and embedded antenna with 3x3 mimo, centrally controlled and managed by wlan, multiple ssid with vlan mapping, dynamic rf coverage optimization, warranty 5 year from day 1 ( make: cisco air ap1832i x k9 / allied telesis at tq4600 / juniper wla632 ) active components cctv 98 sitc of 8 port unmanaged network poe switch: l2, unmanaged, 8 100m poe port, 1 100m uplink port, 802.3af / at, poe power budget 123w make: cisco / allied telesis / hp aruba / juniper or as approved by architect. 99 sitc of 24 port unmanaged network poe switch: l2, unmanaged, 24 100m poe port, 1 100m uplink port, 802.3af / at, poe power budget 310w make: cisco / allied telesis / hp aruba / juniper or as approved by architect. 100 geyzer supply, fitting, fixing, installation & testing of water storage 15 liters geyser of bee 5 star rating vertical type acralic rust free body, facility of temperature control , with capillary themostat and thermal cut, isi certified heating element along with inlet & outlet connecting pipe, fixing clamps, fasteners, etc. as required. make: venus / bajaj / havells lt panel office supply, designing, unloading , shifting to location, manufacturing and effecting proper connection installation, testing and commissioning of all incomer and outgoing of lt panel fabricated out 2 mm ( 14 swg ) crca sheet steel dust, damp and vermin proof ( ip 42 ) free floor / wall standing factory built sheet steel enclosed modular construction extendable panel, suitable for operatrion on 415 + 10% volts, 50 hz ac 3 phase 4 wire system, hinged doors of 2mm thick crca sheet, duly painted ( powder coated ) complete with aluminium bus bars, interconnection with frls pvc copper wire, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per drawing and technical specifications attached etc. complete as required. the sheet steel under go minimum 7 tanks treatment followed by finishing of powder coating of minimum 60 micron thickness, duly compartmentalized having accessories mounted inside the cubical panel, earthing with 2 nos. earth studs. the panels shall be preferably arranged in multitier formation. these shall be of adequate size with a provision of 10 percent vacant space to accommodate future additional switch gear in addition to spare feeders presently provided. the size of the panel shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component do not attain temperature rise more than 40 degree celsius. location : corridor or suitable location the name plate for each feeder must be in anodized aluminium sheet. panel size as per drawing and shall be provided at the time of work order. al. bus bar the panel includes 415v, 250 a, 3ph, 25ka, 50hz electrolytic aluminium bus bar ( e91ewp ) aluminium earth bus with removable glands plates, cable glands at sending and receiving ends, including connection with outgoing feeders complete in all respects. the electrolytic aluminium bus bar of grade 63401 wp as per i:s 5082 of suitable length and insulated by heat shrinkable sleeves red, yellow, blue and black as r y b & n. the current density of bus bar shall be minimum 0.8 a / sq mm. minimum clearance between live parts / neutral to earth shall be 19mm. however clearances between terminals at components shall be as per applicable individual standard for components. interconnections between the main bus bars and individual units shall be made with 2.5, 4, 6 & 10 sq mm frls pvc cu. wire with 35 & 63mm 4 studs ( brass ) treminal blocks, aluminium bus bars of adequate rating. al. bus bar will be supported on insulators made of non hygroscopic, non inflammable material with tracking index equal to or more than that defined in bis contractor will provide shop drawing sld & ga drawing along with bom with cat. no. of each and every components and switch gears of lt panel for approval of consultant. inspection of the lt panel shall be carried out at panel builders factory by the consultant before final delivery for that all arrangements shall be made by the contractor. all 4 pole mccb with thermomagnetic based release must have follwing characterstics: 1. icu=100% ics. 2. with positive isolation marked. 3. with adjustable short circuit and over load. 4. as per iec 60947 2. make of mccb l&t d sine / legrand dpx³ / schneider nsx / siemens 3vl. make of mcb ( 10ka c series. ) l&t u version / legrand dx³ / schneider acti / siemens. bill of material of main lt panel: 1 set of fabrication part of lt panel & busbar system, in crca sheet steel enclosure ( ip 42 / 43 ) without any components & its busbar system, in crca sheet steel enclosure without any components. name of panel builder : jmd electrotech, kokar, arnav poertech, tatisilway, tts systematix private ltd, tatisiway, meditron, meshra, ranchi or any approved panel builders of above make switch gears. indicating 1 sets multifunction meter having led display accuracy class 1 as per iec 62053 21, rs 485 port, ( ethernet / modbus ready suitable for monitoring and control with bms system ) in built rtc, aux supply: 44 277vac / dc. parameters: volts, amps, pf, thd, f, w, wh, va, vah, var, varh, runhrs, onhrs interrupts, thd for v&i per phase, individual harmonics for v&i upto 15th level complying with iec61557 12. min / max for eight parameters. sampling rate: 64 samples per cycle. make schneider / satec / siemnes 3 nos. ct of 200 / 5va 5 class one epoxy resin cast ct ( 3 nos. ) =1 set. make: kappa / matrix 3 sets phase indicating light shall be protected by 2 amps sp mcbs for incomer & outgoing.make l& t. / ae / schneider. incomer : 1 no. 200a fp / 25ka / mccb with adjustable thermomagnetic release type with s / c & o / l protection with front rotary handle and spreader links with on off trip indication. ( incoming cable size –1 run 120sq mm 3.5 core al. ar. cable ) . out going without dg set 3 nos. 63 a fp mcb 10ka c series 4 nos. 25a / fp / 10ka / mcb c series 4 nos. 32a 10 ka, dp mcb c series 2 nos. 63a 10 ka, dp mcb c series total cost of lt. panel ( b ) matv, data networking system & cctv : ( part f ) telephone system data net working system passive component : ( data ) 101 providing, fixing, fitting, connecting and testing of white rj 45 cat 6 data outlet / toolless information outlets with white coloured rj 45 transparent shuttered modular scoket outlets with front plate. etl verified to meet or exceed tia / eia category 6 requirements, universal wiring label permitting to either t568a or t568b, ul listed, for computer networking complete in all respect suitable to fix in modular plate type switch system with connections as required. ( make: legrand arteor 573428 / scheinder zencelo / mk blenz ) 102 supplying, fitting, fixing, connecting and testing cat6 utp rj45 loaded patch panel & connector 24 port loaded 19 panel 1 u, panel: dc01 galvanised sheet steel, compliant with standards: iso / iec 11801 edition 3.0 cenelec en 50173 1 2007 ansi / eia / tia 568 c2 1 iec series 60603 7, nfc 20730, standard 8877 – 603.7, contacts: gold / nickel, thickness of gold > 0.8 μm minimum, equipped with rear cable guide to hold cable during maintenance, the connectors are connected from the front without a special tool. equipped with 4 cassettes of 6 rj45 cat. 6 connectors with toolless fast connection, marked 568 a / b, max. number of connections and disconnections: 5 without replacing the wire, endurance: 2500 operations ( plug in / pull out ) ik03, operating temperature: 40°c to +70°c ( make: legrand arteor 033760 / amps. / schneider. 103 supply fitting, fixing, and testing of blue / yellow color cat6 lcs2 u / utp 1 mtr ( 3.5 ft ) factory made lcs2 patch cord with boot factory crimped pvc, performance at 250mhz should be as per standards iec 61935 2 ed. 3.0 iso / iec 11801, usage temp – 20 to + 60°c, no of twists 500, no of insertions 750, 24 awg for rack end. ( make: legrand arteor 051772 / amp , cat#1859247 4 / schneider ) 104 supply fitting, fixing, and testing of blue / yellow cat 6 lcs2 u / utp 3 mtr ( 10 ft ) factory made lcs2 patch cord with boot factory crimped pvc, performance at 250mhz should be as per standards iec 61935 2 ed. 3.0 iso / iec 11801, usage temp – 20 to + 60°c, no of twists 500, no of insertions 750, 24 awg at end user side. ( make: legrand arteor 051774 / amp , cat#1859247 7 / schneider ) 105 providing, fixing, connecting and testing of modular of 6 port unloaded liu sc type. ( make : legrand.032100 / schneider / amp ) 106 providing, drawing, connecting and testing of 6 core unarmoured unitube multi mode om3 ofc ( fiber optics cable ) from wall mounted rack to server room rack, i, e rack to rack connectivity ) in existing heavy duty 25 mm pvc pipe.make make : legrand cat no 332021 / schneider / tyco. 107 providing, fixing, connecting & testing of blanking plate ( 6xrj45 blanking plate for 19 panel black ) . . ( make : legrand 032129 amp / schneider ) 108 providing, fixing, fitting, connecting and testing of sc pigtial 1 mtr 10 gb 9 / 125, mm make legrand.032241 / schneider / amp 109 providing, fixing, connecting and testing of of 3 duplex sm 9 / 125 sc adapter plate. ( make : legrand 032110 / schneider / amp 110 providing, fixing, fitting, connecting and testing of os1 / os2 sc / lc duplex patch cords 3 mtr, pc ( make : legrand.032605 / schneider / amp ) 111 providing, fixing, connecting & testing of splice tray 12 fiber capacity. : ( make : legrand ( lcs2 ) 032907 / amp / schneider ) ...

Damodar Valley Corporation - Jharkhand

27896085 procurement of various types of ictpn, hrc fuses, change over switch, time switch panel, mccb and mcb for colony elect and chp elect pertaining to 1x500 mw dvc, btps a. procurement of various types of ictpn, hrc fuses, change over switch, time switch panel, mccb and mcb for colony elect and chp elect pertaining to 1x500 mw dvc, btps a. , heavy duty double break 415v ictpn fuse switch unit (hbc fuse type) 400a , heavy duty double break 415v ictpn fuse switch unit (hbc fuse type) 320a , heavy duty double break 415v ictpn fuse switch unit (hbc fuse type) 200a , heavy duty double break 415v ictpn fuse switch unit (hbc fuse type) 100a , hrc fuse cylindrical bolted type 200amp. , hrc fuse cylindrical bolted type 315amp. , mcb 63amp.(tpn) , hrc fuse 400amp. central c1 , mcb 20amp.(sp) , time switch panel for street light switching mounted inside 3 pole mcb, connector, time switch quartz type daily dial with complete wiring. , metal clad plug &socket 20amp.with sp mcb, 20amp. , off load change over switch side handle 320amp. 4pole , 415 volts , 3 pole , 400 amps mccb of breaking capacity 50 ka (min.) with adjustable thermal & magnetic setting with suitable frame size confirming to is: 13947 & iec 60947 , 415 volts , 3 pole , 250 amps mccb of breaking capacity 50 ka (min.) with adjustable thermal & magnetic setting with suitable frame size confirming to is: 13947 & iec 60947 , mccb 100amp. 3pole breaking capacity 25ka , off load changeover switch with flip able handle,110 amp, 4 pole, 415 v , hrc fuse 400amp. central c2...

Damodar Valley Corporation - Jharkhand

26430420 procurement of 20m high mast along with its accessories , 20m high mast shaft in two section suitable for mounting 12 nos , 2x400w , hpsv t lanp fittings with all accessories , supply of twin dome aviation obstruction lights with two nos . of 100 w gls lamps . , outdoor type stand mounted feeder pillar with 32a tpn mcb incomer , single dial time switch , 25a tp contactor for the automatic switching of luminaries , power tool control with 2 no 9a contactors and raise lower push button , incoming 35 sq . mm and out going 16 & 2 . 5 sq . mm terminals . , 300 w led flood light , ...

Central Coalfields Limited - Jharkhand

24504592 providing of stair and exterior lighting arrangement with time switch for 04 nos. of “c†type block at the vasant vihar township under ashok project, piparwar area....

Damodar Valley Corporation - Jharkhand

24217051 procurement of general consumables . for colony maintenance . , piano type switch 5amp . , piano socket 5 amp x 240v . 5pin , piano type switch 15 amp , piano socket 5 in one 15amp , porcelin holde 100w 200w , electronic fan regulator flush mounted , pvc alu . cable 2cx6sq . mm , pvc alu . cable 2cx4sq . mm , angle holder b/c , transparent polycarbonate seal bits with stainless steel sealing wire 8long with alphanumeric laser numbering and laser inprinted logo of dvc , condensor 2 . 5mfd , tumbler switch 5amp . , tumbler socket 3pin 5amp . , tumbler socket 3pin 15amp . , tumbler switch 15amp . , porcelin holder 300w 500w , time switch 230v type fm/qt , mcb 63amp . ( dp ) 240v/415v , 50hz , condensor 3 . 5mfd , mccb , ; , rating 63a , 4p , b . c 25ka , pvc alu . cable 2cx10sq . mm , ...

Central Coalfields Limited - Jharkhand

21916027 tender for providing & fixing of 04 nos. timelite 32 a, 3 pole, 230 v, analog time switch for street light at different location under gm unit, nk area...

Uranium Corporation Of India Limited - Jharkhand

15325326 tender for : rate contract for l&t spares.1 accessories of ml,mnx,mccb and acb. 2 air circuit breakers 3 bimetal overload relays (mn,rto,mxro) 4 bimetal overload relays (ml & mk series) 5 contactors (ml series) 6 contactors (mnx series 45 to 650 amps) 7 contactors(mnx series 9 to 40 amps) 8 digital protective relays 9 electronic metering devices 10 hrc fuse & fuse base 11 l&t esbee items(led indicators, push buttons etc.) 12 l&t salzer items (vss,ass,breaker control switch etc.) 13 l&t gic items (timer, time switch, etc.) 14 modular devices (mcb.rccb,db) 15 motor protection circuit breakers 16 motor starters (ml,mn,mu,mr,mk series) 17 moulded case circuit breakers (d sine series) 18 moulded case circuit breakers (dh series) 19 on load changeover switch disconnectors 20 panel meter 21 power capacitors 22 spares of all standard products (except acb) 23 switch disconnectors fuse units hrc fuses....

Central Coalfields Limited - Jharkhand

8407685 supply of miscellaneous items. 1 pvc steel grip tape ¾” x 25 m size 2 battery 9 v 3 single phase preventer 230v coil 4 wall mounted fan 12” sweep 5 wd 40, 400ml 6 emery tape (rough), 250 gm roll/ 2”, 10m long 7 emery tape (smooth), 250 gm roll/ 3”, 10m long 8 torch cell, 1.5v, ‘aa’ size 9 analog time switch, 230v coil voltage 10 fluorescent tube, 40 w, 230v 11 copper choke, 40 w, 230 v 12 led torch with 3 nos. ‘aa’ pencil cell...