Drinking Water And Sanitation Department - Jharkhand

37847186 supplying, fitting and fixing of 5 nos. 7.5 hp electric submersible pump set along with 5 nos. 200mm x 165mm and 150m hydt in existing lesliganj rural water supply scheme in lesliganj block under d.w. and s. division, medininagar for the year2022 23...

Eastern Coal Fields Ltd - Jharkhand

37844140 pullen make submersible pump & motor with pipe 6inch dia dismantling & lifting from borehole central pool of khoodia colliery, mugma area, ecl....

Eastern Coal Fields Ltd - Jharkhand

37844135 pullen make repair submersible pump & motor with pipe 6inch dia lowering & fitting at borehole central pool khoodia colliery, mugma area, ecl....

Eastern Coal Fields Ltd - Jharkhand

37844127 pullen make submersible pump & motor with pipe 6inch dia lowering & fitting at borehole ashok refactory at khoodia colliery for dewatering....

Central Coalfields Limited - Jharkhand

37843470 providing and repairing of 85 hp, 550v,500gpm submersible pump running at baludenga as well as joktiabad domestic water supply, grd project providing and repairing of 85 hp, 550 v, 500 gpm submersible pump running at baludenga as well as joktiabad domestic water supply, grd project....

Pan IIT Alumni Reach For India Foundation - Jharkhand

37840542 request for quotation for partner empanelment & supply and installation of utility appliances items 1. compact and attractive multi utility fan with all accessories sweep size 150mm speed : 2200 rpm wattage 25 watts can be installed on the wall and put on a table/desk/workstation/bunk beds easy portability with ergonomically designed slot at the back of the fan silent operation 2 fan speed warranty : min 1 years make : usha/ orient/ crompton/ havells/bajaj/orbit/khaitan/superfan/ortem/luminous/syska/wipro. 2. ceiling fan; min sweep size – 1200mm; min 3 blades; min speed – 350 rpm; make : usha/ orient/ crompton/havells/bajaj/orbit/khaitan/superfan/ortem/luminous/sysca/ wipro. 3 wall mount fan; min sweep size – 300mm; min 3 blades; min speed – 1800 rpm; 90 degree oscillation; make : usha/ orient/ crompton/ havells/bajaj/orbit/khaitan/superfan/ortem/luminous/sysca/wipro 4 pedestal fan; min sweep size – 400mm; minimum noise; min 3 blades; min speed – 1200 rpm; make : usha/ orient/ crompton/ havells/bajaj/orbit/khaitan/superfan/ortem/luminous/sysca/wipro 5 exhaust fan make : usha/ orient/ crompton/ havells/bajaj/orbit/khaitan/superfan/ortem/luminous; with automatic shutter, 200mm size. 6. industrial exhaust fan 24 for workshop supply & installation; product category : metal body, model name : heavy duty exhaust fan, sweep : 600 mm (24), power 550 600w, voltage 240v,r.p.m. 900,air capacity (c.f.m.) 5527.2; air capacity (m3h) 9400,no of blade 4, material die cast aluminium. make : usha/ orient/ crompton/ havells/bajaj/orbit/khaitan/superfan/ortem/lu. 7 led tubelight complete set: capacity: 18 20 watt size: 24 inch luminous intensity : minimum 1900 lm rohs uses: classroom, office, living rooms, labs, sewing machine workshops. fluctuation proof & glare free tube light voltage range : 160~280v ac colour material : polycarbonate/glass color : cool day light 6500 k warranty : min 1 year make: philips/bajaj/syska/surya/everday/wipro/luminous/havells/crompton 8 led tubelight complete set: capacity: 36 40 watt size: 48 inch luminous intensity : minimum 2000 lm rohs uses: classroom, office, living rooms, labs, sewing machine workshops. fluctuation proof & glare free tube light voltage range : 160~280v ac colour material : polycarbonate/glass color : cool day light 6500 k warranty : min 1 year make: philips/bajaj/syska/surya/everday/wipro/luminous/havells/crompton 9 led bulb: 9w make: philips/bajaj/syska/surya/everday/wipro/luminous/havells/crompton min 1 year warranty 10 led bulb: 15w, make: philips/bajaj/syska/surya/everday/wipro/luminous/havells/crompton min 1 year warranty 11 led flood light 50 watt, color : cool day light 6500k ,water proof (ip65 rated), minimum 5000 lumens make: philips/bajaj/syska/surya/everday/wipro/luminous/havells/crompton/or pat/ min 1 year warranty 12 led flood light 100 watt, color : cool day light 6500k, water proof (ip65 rated), minimum 10000 lumens make: philips/bajaj/syska/surya/everday/wipro/luminous/havells/crompton/or pat min 1 year warranty 13 vaccum cleaner (suppy and installation) wet and dry with wheel for easy movement, 360 degrees swivel wheels should include all the neccessory accessories: flexible hosepipe, extention tubes, carpet/floor brush, crevice nozzle, utility nozzle, upholstery brush, multipurpose brush, wet squeeze,two extension wands, wall mount, tool holder, reusable dry filter, foam filter, disposable filter bag. special features: portable usage: carpet cleaning, floor cleaning, workshops, classrooms capacity: minimum 30 liters input power supply : single phase 220v ac, 50 hz min vacuum pressure >18kpa ,minimum airflow : 1.8m3/min, noise (db) : <88 db power cord length: min 4.5m warranty : min 1 years make : eureka forbes/bosch/makita/philips/prestige/stanley/kent 14 vaccum cleaner ((suppy and installation)wet and dry with wheel for easy movement, 360 degrees swivel wheels should include all the neccessory accessories: flexible hosepipe, extention tubes, carpet/floor brush, crevice nozzle, utility nozzle, upholstery brush, multipurpose brush, wet squeeze,two extension wands, wall mount, tool holder, reusable dry filter, foam filter, disposable filter bag. special features: portable usage: carpet cleaning, floor cleaning, workshops, classrooms capacity: minimum 20 liters blower efficiency 30 35 liters/sec input power : min 1200 watts suction of motor : min 2200mm/wc warranty : min 1 years make : eureka forbes/bosch/makita/philips/prestige/stanley/kent 15 room heater rod type (wire based heater) body material : metal heat setting : 2000 w maximum power output : 2 warranty : min 1 years multiple heating mode make: usha/havells/morphy richards/bajaj/orient/orpet/eveready/philips/havells/khaitan/pansonic/r oxy 16 blower heater with all neccessory body material : plastic revolving type overheat protection : yes maximum power output : 2000 w multiple heating mode warranty : min 1 years make : usha/havells/morphy richards/bajaj/orient/orpet/eveready/philips/havells/khaitan/pansonic 17 1500 watt immersion rod bajaj/usha/eveready/roxy make: usha/bajaj/roxy/crompton/havells/eveready min 1 year warranty 18 geyser ((suppy and installation)) for hot water, tank capacity 25 ltr, glass coated heating element ,corrosion resistant tank with anode rod volume [l] :25, power [w]: 2000 voltage/frequency [v/hz]: 230~/50 actual stdg. loss [kwh/24h/45°c diff.]: 0.540 reheating time for 35°c rise [in min.]: 20 minutes or less temperature range [°c]: 25 75 with temprature control knob between 25 to 75 degree with autocut feature rated water pressure(n/cm2/water head (metres)): approx 80/80 minimum bee 4 star rating or more warranty: minimum 5 year on tank and minimum 2 year on heating element make:a.o.smith/racold/vguard/ usha/crompton/havells/american micronic/bajaj/venus/orient/lifelong/panasonic 19 geyser (suppy and installation) for hot water, tank capacity 50 ltr, glass coated heating element,corrosion resistant tank with anode rod volume [l] :50, power [w]: minimum 3000 voltage/frequency [v/hz]: 230~/50 actual stdg. loss [kwh/24h/45°c diff.]: 0.724 reheating time for 35°c rise [in min.]: 35 minute or less temperature range [°c]: 25 75 with temprature control knob between 25 to 75 degree with autocut feature rated water pressure(n/cm2/water head (metres)): approx 80/80 minimum bee 4 star rating or more warranty: minimum 5 year on tank and minimum 2 year on heating element make: a. o smith/racold/vguard/ usha/crompton/havells/american micronic/bajaj/venus/orient/lifelong/panasonic 20 submersible pump 1.5 hp power rating : 1.1kw motor power : 1.5 hp anti rust stainless steel motor body with anti rust coating internal parts with starter flow rate : minimum 105 lpm usage : for water borring, minimum depth of water extraction from ground : 350 ft warranty : min 1 year warrant designed for underwater application make : kirloskar/aquatech/crompton/usha/cri 21 submersible pump 2 hp power rating : 1.5 kw motor power : 2 hp anti rust stainless steel motor body with anti rust coating internal parts with starter flow rate : minimum 120 lpm usage : for water borring, minimum depth of water extraction from ground : 400 ft warranty : min 1 year warrant designed for underwater application make :kirloskar/aquatech/crompton/usha/cri 22 submersible pump 1hp power rating : 0.75 kw motor power : 1 hp anti rust stainless steel motor body with anti rust coating internal parts with starter flow rate : minimum 105 lpm usage : for water borring, minimum depth of water extraction from ground : 350 ft warranty : min 1 year warrant designed for underwater application make : kirloskar/aquatech/crompton/usha/cri 23 electric lawn mower (suppy and installation) with all accessories chorrded motor capacity minimum: 12 amp cutting height : 0.75 to 4 inch cutting width (min) : 20 inch or more no. of cuts per meter: more than 40 grass collecting capacity : 50 ltr or more cutting height adjustments: minimum 3 application: to cut grass/lawn in garden, play ground. warranty: minimum 2 year make: kisankraft/falcon/greenworks/makita/maruti/bosch/honda/falcon/ego/ 24 petrol/diesel/gas lawn mower (suppy and installation) with all accessories material : metal cutting height : 0.75 to 4 inch cutting width (min) : 18 inch or more displacement : minimum 100 cc motor/engine power (hp): minimum 3 hp tank capacity (ltr): minium 1 ltr grass collecting capacity: minimum 50 ltr blade type swing back blades no. of possible height adjustments: 3 stage application: to cut grass/lawn in garden, play ground. warranty: minimum 2 year make: kisankraft/bosch/honda/maruri/makita/greenwork/craftsman/snapper /falcon 25 safety uniform display male/femal (as per requirement) mannequin (full standing ) mannequin performing as a work(construction & manufacturing) safety dummy usages: to display safety wear including full dangri/uniform, safety jacket, safety helmet, gloves, shoes, safety goggles, face mask, full body safety belts, full body , skin color dummy consists of 6 parts: a head, a torso, 2 arms, 2 legs, a tempered glass base and aluminum joint. her head can be adjusted up and down in 60°, and rotated horizontally in 360°. arms can also be rotated in 360° unbreakable material. with strong hold stand with adjustment best for all rough use at sites portable to move height : 5.5 ft or more material: high quality plastic/ fiber glass/fiber/metal. light weight 26 electronic weighing scale platform (suppy and installation) capacity 100 kg, min platform size 450x450 mm, least count 20gms, platform material ss top & ms in structure, isi certificate min 1 year warranty 27 digital personal body weight scale (glass top), material: tempered glass or abs weight range: 5 180 kg; 100g graduation, accuracy range:+/ 100 to 300g,measurement unit: kg/lg/st, minimum 3.5 cm lcd with backlight display, with two cell battery, low battery indicator warranty: 1 year or more make: omron/dr trust/healthsense/venus/unique/equinox/hoffen/healthgenie or or equivalent brands approved by prejha 28 induction cooktop – ceramic body; make – prestige/bosch/philips/havells/bajaj power: min. 1000 watt automatic voltage regulator, , automatic whistle counter, automatic keep warm function anti magnetic wall anti magnetic wall feather touch buttons warranty : 1 year 29 induction cooktop – ceramic body; make – prestige/bosch/philips/havells/bajaj power: min. 2000 watt, automatic voltage regulator, automatic whistle counter, automatic keep warm function anti magnetic wall feather touch buttons, warranty : 1 year 30 dry iron heavy duty : usha/bajaj/ philips/ panasonic /crompton/havells/syska/morphy thermal biostat for temp control, min 750 watt, with min 1 year warranty 31 insect killer device 20w ( fly killer pest killer machine ) electric power: 20 watts / bulbs two 10 watt blue colour uv bulbs (replaceable).1 year manufacturer warranty dimension (cm ): l*b*h 40*10*29; make wantm/hygiene/bajaj/nuvan 32 fogging machine type: thermal aerosol pulse jet fogging machine, electronic sparking mechanism, chemical tank capacity: 6ltr, machine weight: approx 8kg, make: aspee/kisancraft/neptune/eureka forbes or equivalent brands approved by prejha 33 refrigerator : inverter direct cool refrigerator, latest model as on bidding date. minimum capacity : 190 lt or more single door (lg / whirlpool / godrej/samsung/haier) energy rating : 3 star or more + automatic stabilizer(90v to 300v) 34 refrigerator minimum capacity: 400 lt or more latest model as on bidding date. inverter frost free doube door refrigerator make: (lg / whirlpool / godrej/samsung/haier) energy rating : 3 star or more, + automatic stabilizer(90v to 300v) 35 direct cool single door refrigerator (45 55) liters,240 volts,stainless steel,toughened glass shelf,door lock control options, powerful cooling, ice tray,warranty: 1 year warranty on product ,5 years warranty on compressor make: lg,whirlpool,haier,videocon, samsung, godrej, 36 convection microwave oven, 20 ltr convection: can be used for baking along with grilling, reheating, defrosting and cooking . control: touch key pad (membrane) is sensitive to touch and easy to clean wattage: minimum 1200 watts voltage: 230 volts warranty: minimum 1 year on product and 3 years on magnetron and cavity make: ifb/godrej/lg/pansonic/whirpool/bjaja/samsung/haier 37 water purifier (suppy and installation) (ro+uv) (min storage capacity 8 litres) type electrical & storage water purifier purification method ro + uv power requirement 230 v, 50 hz power consumption 40 60 w. product should include all required accessories and free installation at site. make – aquaguard/eureka forbes, bluestar, kent, havells, a. o smith, livpure, faber. 38 7 stage water purifier (suppy and installation) (ro+uv): 50litre water capacity, storage tank made of food grade plastic. two faucets for water discharge. product should include all required accessories and free installation at site. make – aquaguard/eureka forbes, bluestar, kent, havells, a. o smith, livpure, faber. 39 water purifier (ro+uv) (suppy and installation), 250 lph (ltr per hour) discharge of ro water, alkaline water, antibacterial, antioxidant, h2 rich water orp reducer, half ss body. can be directly installed in between existing water tank and water tap. product should include all required accessories and free installation at site. 40 water cooler with inbuilt ro+uv 7 stage purification (suppy and installation) : 80litre water capacity, stainless steel tank, nominal cooling capacity: 60 ltr/hour, % of purified water recovery: minimum 25 %, 50 lph ro+uv purification, 7 stages of filtration, fully automatic two faucets for water discharge. product should include all required accessories and free installation at site. make – aquaguard/eureka forbes, bluestar, kent, havells, a. o smith, livpure, faber. 41 80 litre air cooler (along with trolly )(suppy and installation), honeycomb cooling pad with aintibactriral (helps to remove dust particles, micro organisms and other hazardous particles to give cool and fresh air) air purification technology, auto swing louvers for 4 way air deflection, water drain plug for easy cleaning, 4/5 castor wheels , motorize louver movement, rust free and easy to wipe and clean,auto drain switch,air throw distance (55 ft),extra large ice chamber,air delivery: minimum 4000m3/hr,suitable for upto 650 sq.ft. area,auto fill,warranty 1 year on product,power 230 watts make : crompton greaves,symphony,bajaj,orient,usha,havells, voltas 42 air cooler (min capacity – 50 litre, along with trolley), honeycomb cooling pad with aintibactriral (helps to remove dust particles, micro organisms and other hazardous particles to give cool and fresh air) air purification technology auto swing louvers for 4 way air deflection, water drain plug for easy cleaning, 4/5 castor wheels , motorize louver movement, rust free and easy to wipe and clean,auto drain switch,air throw distance (40 ft),extra large ice/water chamber,air delivery: minimum 4000m3/hr,suitable for upto 400 sq.ft. area,auto fill,warranty 1 year on product,power 230 watts make : crompton greaves,symphony,bajaj,orient,usha,havells, voltas 43 invertor (make luminous/microtek/exide/numeric/su kam/cyber power/uniline/hitachi/okaya/true power, min 2500 va), technology: sinewave min no. of battey required: 2, capacity: 2500 va warranty: minimum 2 year onsite. 44 invertor (make luminous/microtek/exide/numeric/su kam/cyber power/uniline/hitachi/okaya/true power,1500 va) technology: sinewave min no. of battey required: 2, capacity: 1500 va warranty: minimum 2 year onsite. 45 tubular batteries for inverter (150ah, make exide/amaron/luminous/microtek/okaya/true power/cyber power/numeric/su kam/uniline). capacity in ah: 150 ah, battery voltage: 12 v long life: minimum 1000 cycles@80 dod segment: inverter battery for power backup warranty : minimum 3 year on site free of cost warranty. 46 tubular batteries for invertor (230ah, make exide/amaron/luminous/microtek/okaya/true power/cyber power/numeric/su kam/uniline). capacity in ah: 230 ah, battery voltage: 12 v long life: 1200 cycles@80 dod segment: inverter battery for power backup warranty : minimum 3 year on site free of cost warranty. 47 stabilizer 5kva, input volt 90 to 300v, output voltage: 220,make microtek/v guard/cummins/ 48 stabilizer 10kva, single phase input volt 90 to 330v, output voltage: 220 make microtek/v guard/cummins 49 stabilizer 10kva, 3 phase input volt 280 to 480v, output voltage: 440 ,make microtek/v guard/cummins 50 spike guard with 4 sockets cord length min 2metre, make anchor/syska/belkin/philips/bajaj/gm 51 round extension box with 3 outlets, min wire length 4 mtr, with switch & indicator, make anchor/philips/belkin/syska/bajaj/gm 52 sanitary napkin incinerator burning capacity per day 600 napkins approx storage capacity per time 35 napkins approx body type coated by ms powder heater power 2000 watts program type micro processor process type automatic advantage sensor safety steps 4 steps cut off colour blue 53 12 kg fully automatic top loading washing machine, lg / samsumg / whirlpool/ifb/godrej/bajaj/haier 3 star or more 54 7 kg fully automatic top loading washing machine, lg / sumsung / whirlpool//ifb/godrej/bajaj/haier 3 star or more 55 split ac(carrier/ hitachi/ lg/voltas/samsung/haier/bluestar ) + voltge stabiliser supply l installation nominal cooling capacity (ton) 1.0 ton, bee star rating 3, type of air conditioner 1:1 1 ligh wall split ac, coil material cu, warranty on compressor 5 years warranty on machine 1 year(s), installation and commissioning inclusive 5 meiers of copper pipe for installation and commissioning (only for split ao inclusive) 56 split ac(carrier/ hitachi/ lg/voltas/samsung/hair/bluestar ) + voltge stabiliser supply l installation nominal cooling capacity (ton) 2.0 ton, bee star rating 3, type of air conditioner 1:1 1 ligh wall split ac, coil material cu, warranty on compressor 5 years warranty on machine 1 year(s), installation and commissioning inclusive 5 meiers of copper pipe for installation and commissioning (only for split ao inclusive) 57 portable public address(pa) system with remote control handheld wireless microphone for addressing. speaker: minimum 50 w with inbuilt amplifier and woofer. with inbuilt recording system multiple connectivity option: usb, sd/tft card, aux 3.5 mm and wireless bluetooth (minimum version 4.2)connectivity. can be used as karaoke system/karaoke ready system rechargeble lithium ion battery with minimum 4 hour of power baclup make: ahuja/zook/jbl/philips/boat or equivalent brand approved by prejha 58 dryer type: condenser capacity: 8 kg minimum low noise level ,bosch / lg / ifb / siemens 59 printer toner cartridges hp ce400a black laser jet 60 printer toner cartridges brothers tn 2365 toner cartridge 61 printer toner cartridges hp laserjet m1005 multi function printer black ink toner cartridge 62 mixer grinder guarantee 2 year worldwide guarantee no. of jars: 4 capacity jar:1.5 l , 0.5 l, 2x 1.0 l cord length:1.2 m (min) rpm blender (max):20000 rpm power:750 w voltage:230 v rpm motor no load:19000 rpm rpm motor with load: 11500 rpm make: bajaj/bosch/orient/havells/prestige/morphy/roxy/usha/crompton/philip s/sujata/panasonic/maharaja 63 1000 w mixer grinder (3 jars), high speed performance at up to 20,000 rpm, grinding jar capacity: 1 l liquidizing jar capacity: 1.5 l chutney jar capacity: 0.4 l make: bajaj/bosch/orient/havells/prestige/morphy/roxy/usha/crompton/philip s/sujata/panasonic/maharaja 64 gps digital wall clock : time shown in hours, minutes separated by flashing colon indicating seconds micro controller based system 8/32 bit ambient temperature range of –10°c to +70°c leds 5mm oval. color : red/amber/blue/white system voltage 200 240 volts size of led matrix (280 350) x (140 150) mm format both 12hrs and 24 hrs system built in rtc (real time clock) system gps reviever: 1. it should support nmea protocols. 2. fully compatible with sps and accuracy should be better than 10 ms. 3. 1hz update rate gps antenna: it shall be provided with either magnetic mounting or screw (fixed) mounting with micropatch, active antenna powered from the receiver module itself as per site requirement. 65 generator battery lead acid genset battery, 12 v, battery type automotive battery,model number 35 ah to 200 ah ,electrolyte volume 5.0 liters,warranty 66 months warranty,warranty terms36 month replacement and 30 months pro rate, brand exide/amaron/luminous/microtek onsite warranty service support by the company 66 generator battery lead acid genset battery, 12 v, battery type automotive battery,model number 90 ah ,electrolyte volume 5.0 liters,warranty 66 months warranty,warranty terms36 month replacement and 30 months pro rate, brand exide/amaron/luminous/microtek onsite warranty service support by the company 67 generator battery lead acid genset battery, 12 v, battery type smf, vrla ( sealed maintenance free ) , model number 75 ah , warranty 24 months brand exide/amaron/luminous/microtek onsite warranty service support by the company 68 generator battery lead acid genset battery, 12 v, battery type automotive battery,model number 40 ah to 100 ah ,electrolyte warranty 36 months warranty,warranty terms18 month replacement and 18 months pro rate, brand exide/amaron/luminous/microtek onsite warranty service support by the company 69 2kva sine wave ups type of product : sine wave home ups,voltage: 24v,output power : 1680 watt,input voltage: 110v 290v,charging current: 220v,output voltage: 180v 230v,rated capacity: 2000 va make: luminious/microtek/su kam/apc/genus power/cyber power/amara raja/hitachi/delta power/true power/toshiba/vguard/ uniline 70 (4kva 36v) ups voltage: 36v,technology: sine wave,no. of batteries supports: more than 2 batteries (12 volt each),capacity: 4000va,max charging current (in amperes): 21a,bulb load: 3200w luminious/microtek/su kam/apc/genus power/cyber power/amara raja/hitachi/delta power/true power/toshiba/v guard/uniline 71 hot case large(for keeping rotis hot) 6500 ml , material: ss, make: milton/borosil/pinnacle/jaypee/cello or equivalent brand approved by prejha 72 hot case large(for keeping rotis hot) 2500 ml , material: ss, make: milton/borosil/pinnacle/jaypee/cello or equivalent brand approved by prejha...

Eastern Coal Fields Ltd - Jharkhand

37771450 round the clock hiring of 85 hp,120 mh,550 volts.500 gpm submersible pump motor complete set along with complete electricals for dewatering of bp seam of chapapur colliery....

Bharat Coking Coal Limited - Jharkhand

37770841 tender for repairing/replacement of damaged/defective starter switch (04nos.) of submersible pump at pump house, washery division, installation of 02 no. window ac and providing and fixing of display board at cag/auditor office and dg station washery division....

Municipal Corporation - Jharkhand

37694957 tender for renovation and relaying of pipe line for stand post in 05 nos. hydt existing tube well, flushing including submersible pump in kanwaria route line o&m for 60 days during s.mela 2023...

Drinking Water And Sanitation Department - Jharkhand

37693274 re commissioning of pasai rural piped water supply scheme which is close at present by providing new submersible pump set, repairing of pipe & esr & provision ofhouse connection for fhtc to 275 nos households under d w & s d godda for the year 2023 24 under dmft headon turn key basis.group no : gdd / dwsd / g 9...

Drinking Water And Sanitation Department - Jharkhand

37683655 tender for supplying, fitting and fixing of 5 nos. 7.5 hp electric submersible pump set along with 5 nos. 200mm x 165mm & 150m hydt with all complete job in existing lesliganj rural water supply scheme in lesliganj block under d w & s division, medininagar in the year 2022 23....

Nagar Palika Nigam - Jharkhand

37683442 tender for construction of 200 mm x 165 mm dia x 200 mtr deep hydt with 200 mm dia with 2.0 hp submersible pump in crpf campus in bazar samiti...

Nagar Palika Nigam - Jharkhand

37683353 tender for deep boring (200x150 mm dia) & installation of 2 h.p submersible pump set (02 nos.) at community toilet of taxi stand & vivah bhawan in hazaribag under municipal corporation, hazaribag....

Military Engineer Services - Jharkhand

37665214 repair maintenance of centrifugal pump set submersible pump set air compressor and connected items and repair replacement of internal electrification along with all connected item at prc src and minor units married and otm accommodation at ge ramgarh...

Drinking Water And Sanitation Department - Jharkhand

37643727 construction of mini rural water supply scheme solar motor pump complete set in block giridih panchayat sindwariya village kurumdiha svs group of scheme under jjm d.w.s. division, no 2 giridih for the year 2022 23 svs 66 , model 1awith source(drilled t/w 125/115 dia mm, 60m deep) , tube well , drilling portion , construction for 115/125 mm dia drilled tube well for drilling in all kinds of soil rock for installation of hand pump with d.t.h rig machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant for making 125/115 mm dia boring etcand cost of transporting rig machine and other vehicle up to site workas per specification and direction of engineer in charge. , (a) up to 30mtr. depth bellow g.l. in rural areas , (b) beyond 30mtr.in rural areas , providing all equipments and labour for lowering 125mm dia blue upvc casing pipe as casing for protecting the side from falling during the process of drilling all complete job including carriage of material to work site. , supplying labour cement and calcium chloride or bentonite solution and equipments for grouting to casing pipe all complete job including carriage of material to work site as per specification & direction of e/i , supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per direction e/i. , supplying all materials labours and equipment including 125 mm dia gi/ci cap 125 mm dia t/w properly all complete and taking it out as per specification & direction of e/i. (the cap will be property of department) , civil portion , supplying all tools, equipment, labours and lowering 32 mm dia g.i. (medium)pipe in dt in 3 mtr. length all complete job as per direction of e/i. including carriage of materials. , supplying all tools, labour for fitting and fixing deep well cylinder with necessary connecting rod all complete job as per specification & direction of e/i. , supplying all materials, labours for fitting and fixing of india mark ii hand pump with all accessories all job complete as per direction of e/i. including carriage of materials. , supplying all materials, labours and equipment for constructing pcc (1:2:4) circular platform around each drilled tube well including 12mm thick cement plaster (1:4) with neat cement punning over exposed surface as per unicef design etc. all complete. including carriage of materials. , supplying all materials labour and equipment for constructing pcc (1:2:4) drain as per unicef design etc. all complete .including carriage of materials. , add extra item for supplying tools, labours and materials for painting, numbering and year for construction of t/well and taking of colour photograph with two or three nearest persons including platform, drain, soak pit and also longitude & latitude, details of t/w such as total depth, casing depth, static water level, drawdown, discharge, strata chart, beneficiary population etc in separate sheet/format all complete as per direction of e/i. , cost of materials , cost of standard i.s.i. mark deep well hand pump for india mark ii, i.s.i. 15500 (part 2) / 2004 with latest revision including 12mm x 3 meter long 8 no. connecting rods made of bright bar electro galvanized fitted with coupler & normal stand assembly recommended for use with cylinder assembly suitable for bore wellcasing pipe. , cost of 32 mm dia gi pipe (medium) 3 mtrs long screwed at both ends with seamless socket as per is:1239(part 1990). , cost of 125 mm dia blue upvc casing pipe as per i.s.12818/2016 cml no. 5543459 , solar photovoltaic (spv) solar submersible d.c. water motor pump , designing, supplying, installation, testing & commissioning with all tools & parts of following solar photovoltaic (spv) solar submersible d.c. water motor pump suitable for minimum 125mm x 115mm bore well as per mnre guideline with following specifications & accessories. , spv arrays contains specified no of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual pvmodules should be minimum 200 watt peak. , i) the spv modules should be as per iec 61215 and iec 61730 part 1.0) , ii) all external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required. , iii) the pv modules shouldbe mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & high wind pressure up to 200km/h. , iv) the module mounting structure should be hot dip galvanized according to is 4759. , v) to enhance the performance of spv water pumping system & arrangement for seasonal tilt angle adjustment should be provided , vi) necessary arrangement should be provided in controller automatic start run stop through out the day with water level detection system. (as per mnre specification) , vii) necessary protection such as lightening arrestor etc. should be provided to protect the controller & spv , viii) the suction/delivery pipe shall be upvc / h.d.p.e. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/sq cm pe 100 grade for pump up to 3hp & 10 kg/sq cm pe 100 grade for 5 hp. , ix) all cable used shall be as per is 694. suitable size of cable shall be used in sufficient length for inter connection between the spv array to spv controller and spv controller to solar power pump. provision of cable shall be as per is 14536. , x) the motor pump set should have a 5 years warranty. , xi) control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box. (as per mnre specification) , xii) the spv controller must have ip 65 protection or must be housed in cabinet having at least ip 65 protection. , xiii) the system should be as per mnre guide line & eco friendly with suitable arrangement to operate new pump manually. , xiv) with third party inspection before dispatch. , xv) fitting, fixing & mounting on water tank steel structure. , xvi) provision for web basedremote monitoring of the pumps to be installed must be made through the inbuilt controllers . it should be possible to ascertain the daily water output, the power generated by pv array ,the up and downtime of the pump during the year, number of days the pump was unused or under breakdown repairs. , the following details should be marked indelibly on the motor pump set , a) name of the manufacturer or distinctive logo. , b) model number. , c) serial number. , solar submersible motor pump (spv dc type) , i) 1 hp (dc pump) with 900 wp minimum watt p.v. panel as mnre pump head max shut off head up to 120 mtrs. for higher or lower head or in between various modules output could be decided on prorates basis. (as per latest guide line of mnre) , carrying out recuperation/yield test for ascertaining the discharge of constructed well/ excavated profile as directed by the iec. the testout by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of w.s. scheme shall be recorded prior to the test including cost of all materials, over load , labours etc. complete as directed. , supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old g.i. pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the t/w in good condition with all transportation including unused taken out materials back in store all complete job as per direction of e/i. , provision of solar night lamp. , construction rcc foundation for steel structurestaging& solar panel , earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of e/i (vide classification of soil item b) , providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of e/i(mode of measurement compacted volume) , providing designation 75 a one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of e/i , providing pcc m 150 in nominal mix of (1:2:4) in foundationwith approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of e/i , providing rcc m 200 in nominal mix of (1:1.5:3) in columnswith approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of e/i. , (a)foundation for steel structure staging , footing , vertical pedestal , tie beam , (b)foundation for solar panel , footing , vertical pedestal , providing for steel reinforcement as per approved design and drawing excluding carriage of t.s. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of e/i. , 10 mm dia , 12 mm dia , carriage of construction materials to work site including loading, unloading & stacking etc. all complete. , cement10km lead , steel10km lead , stone chips 11km lead , sand36km lead , bricks 06km lead , construction ofgalvanized tubular steel structure staging for (4.5m) hdpe water storage tank& solar panel. , providing structural steel galvanised tubular hollow section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by engineer in charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & for structure(plus) providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (net wt. of components to be galv) preferably tata structural section etc complete. , providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by engineer in charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete. , materials and labour for vinyl painting of matter given by department in different color , installation of 2000 liters capacity water storage tank , providing and fixing hdpe container syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 2000.00 litres capacity water storage tank , transportation charge , lifting of 2000 litrs capacity tank up to 4.5m height with lifting tools with rope and labour , making hole in tank , making long screw in g.i. pipe including supplying and fitting jam nuts and extra socket etc. , rising and distribution network with house connection up to 10 nos. including platform & stand post , earth work in excavation in foundation trenches in hard soil (vide classification soil item b) and disposal of excavated earth as obtained to a distance up to 50 mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of e/i. , dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all leads all complete. , providing pccm 200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of fm 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of e/i. for construction of road cutting portion. , rising main , manufacture, supply and delivery offollowing nominal dia upvc column pipes including pvc socket (coupler), , 65mm dia density of pipe 1.38 to 1.43 gm per cm3 od:74.5 to 75.2mm wall thickness end:9mm to 10.7mm, barrel 9mm to 10.7 mm, length: 3mtrs.rising main , 50 mm dia density of pipe 1.38 to 1.43 gm per cm3 od:87.5 to 88.2mm wall thickness end:9 .8 mm to 11.9mm, barrel 7.3mm to 9 mm, length: 3mtrs. delivery pipe , distribution main , providing and supplying high density polyethylene pipe (hdpe pipe) of 20 mm to 225 mm od and pressure 6.0 kg/cm2 and 10 kg/cm2 suitable for water supply which is available in all standard conforming to isi 4984/14151/12786/13488,iso 4427 , din 8074materials rates are ex factory excluding transportation, taxes and duties. pe 80 , pn 10. , 63 mm hdpe pipe , 50 mm hdpe pipe , 32 mm hdpe pipe , 20 mm hdpe pipe , providing and fixing gun metal gate valvewith c i wheel of approved quality(screwed end). , 65 mm dia , 50 mm dia . , providing and supplying high density polyethylene(hdpe )fittings of 20 mm to 225 mm od and pressure 6.0 kg/cm2 and 10 kg/cm2 suitable for water supply which is available in all standard conforming to isi 4984/14151/12786/13488,iso 4427 , din 8074materials rates are ex factory excluding transportation, taxes and duties. , lowering, laying and jointing h. d. p. e./m. d.p. e. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant is code complete with all materials for jointing procedure like electro fusion machine, electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per is 7634 part ii. , for rising , 65 mm hdpe pipe , 50 mm hdpe pipe , for distribution , 65 mm hdpe pipe , 50 mm hdpe pipe , 32 mm hdpe pipe , 20 mm hdpe pipe , 15 mm dia gi pipe , supplying all materials , labour and tools for fixing 15 mm dia g.i. pipes with red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of engineer in charge. , supplying and fixing g.i. fittings of approved make all complete as per specification and direction of e/i. , elbow 15 mm dia. , reducer socket 20x15 mm dia. , nipple 15 mm dia. , plain socket 15 mm dia. , supplying and fixing g.m. ferrule of approved make in existing c.i./d.i. main including drilling and taping c.i./d.i. main all complete as per specification and direction of e/i. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram. , providing and fixing gun metal full way valve of approved quality, all complete, as per specification and direction of e/i. , 65 mm dia full way valve , 50 mm dia and weight not less than 1.5 kg. , providing and fixing of male ended c.i.body brass spindle valve and seat bib cock of approved quality with extra socketall complete as per specification and direction of e/i. , 15 dia and weight not less than 400 gm , constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with c. i. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design.with common burnt clay f.p.s.(non modular) bricks of class designation 7.5. , full way valve chamber , supplying materials , labours and equipments for construction of 0.90m x 0.90 m size p.c.c. (1:2:4) rectangular platform with stand post in house including 12 mm thick cement plaster in c.m. (1:4) with neat cement punning over exposed surfaceall complete job, as per approved design, specification and direction of e/i. , providing brick masonry chamber ofinner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm r.c.c cover including cement plaster of exposed surface, etc all complete job. , earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of engineer in charge. , providing fitting & fixing 32 mm to 50 mm service hdpe saddleall complete job, as per approved design, specification and direction of e/i. , carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of e/i. , cement lead 10 km (avg.) , sand lead 36 km (avg.) , stone chips lead 11 km (avg.) , steel reinforcement lead 10 km (avg.) , bricks lead 06 km (avg.) , annual operation & maintenance cost based on existing d/t well with solarmotor pump for 5 years , o & m cost for 1st year , o & m cost for 2nd year , o & m cost for 3rd year , o & m cost for 4th year , o & m cost for 5th year , provision of one no sim card & its recharging cost for rmc , 18% gst , labour cess...

Drinking Water And Sanitation Department - Jharkhand

37643725 construction of mini rural water supply scheme solar motor pump complete set in block dumri panchayat chachando village jobhi svs group of scheme under jjm d.w.s. division, no 2 giridih for the year 2022 23 svs 79 , model 1b with source (drilled t/w 125/115dia mm, 60m deep) , tube well , drilling portion , construction for 115/125 mm dia drilled tube well for drilling in all kinds of soil rock for installation of hand pump with d.t.h rig machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant for making 125/115 mm dia boring etcand cost of transporting rig machine and other vehicle up to site workas per specification and direction of engineer in charge. , (a) up to 30mtr. depth bellow g.l. in rural areas , (b) beyond 30mtr.in rural areas , providing all equipments and labour for lowering 125mm dia blue upvc casing pipe as casing for protecting the side from falling during the process of drilling all complete job including carriage of material to work site. , supplying labour cement and calcium chloride or bentonite solution and equipments for grouting to casing pipe all complete job including carriage of material to work site as per specification & direction of e/i , supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per direction e/i. , supplying all materials labours and equipment including 125 mm dia gi/ci cap 125 mm dia t/w properly all complete and taking it out as per specification & direction of e/i. (the cap will be property of department) , civil portion , supplying all tools, equipment, labours and lowering 32 mm dia g.i. (medium)pipe in dt in 3 mtr. length all complete job as per direction of e/i. including carriage of materials. , supplying all tools, labour for fitting and fixing deep well cylinder with necessary connecting rod all complete job as per specification & direction of e/i. , supplying all materials, labours for fitting and fixing of india mark ii hand pump with all accessories all job complete as per direction of e/i. including carriage of materials. , supplying all materials, labours and equipment for constructing pcc (1:2:4) circular platform around each drilled tube well including 12mm thick cement plaster (1:4) with neat cement punning over exposed surface as per unicef design etc. all complete. including carriage of materials. , supplying all materials labour and equipment for constructing pcc (1:2:4) drain as per unicef design etc. all complete .including carriage of materials. , add extra item for supplying tools, labours and materials for painting, numbering and year for construction of t/well and taking of colour photograph with two or three nearest persons including platform, drain, soak pit and also longitude & latitude, details of t/w such as total depth, casing depth, static water level, drawdown, discharge, strata chart, beneficiary population etc in separate sheet/format all complete as per direction of e/i. , cost of materials , cost of standard i.s.i. mark deep well hand pump for india mark ii, i.s.i. 15500 (part 2) / 2004 with latest revision including 12mm x 3 meter long 8 no. connecting rods made of bright bar electro galvanized fitted with coupler & normal stand assembly recommended for use with cylinder assembly suitable for bore wellcasing pipe. , cost of 32 mm dia gi pipe (medium) 3 mtrs long screwed at both ends with seamless socket as per is:1239(part 1990). , cost of 125 mm dia blue upvc casing pipe as per i.s.12818/2016 cml no. 5543459 , rcc foundation for steel structurestaging& solar panel , earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of e/i(vide classification of soil item b) , providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of e/i , back filling , providing nominal mix pcc of (1:2:4) in foundationwith approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of e/i , providing rcc m 20 in nominal mix of (1:1.5:3) in columnswith approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of e/i. , (a)foundation for steel structure staging , footing and vertical pedestal raft , column , tie beam , (b)foundation for solar panel , footing , vertical pedestal , providing for steel reinforcement as per approved design and drawing excluding carriage of t.s. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of e/i. , (a) foundation for steel structure staging , carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of e/i. , (cement+rod) lead 10 km (avg.) , sand lead 36 km (avg.) , stone chips lead 11 km (avg.) , steel reinforcement lead 10 km (avg.) , bricks lead 06 km (avg.) , galvanized tubular steel structure staging forhdpe water storage tank& solar panel , providing structural steel galvanisedsqure pipe section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by engineer in charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & for structure(plus) providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (net wt. of components to be galv) preferably tata structural section etc complete. , hardware (l.s.) , information board for iec , providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by engineer in charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete , installation of 5000 liters capacity water storage tank , providing and fixing hdpe container syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 5000.00 litres capacity water storage tank , transportation charge , lifting of 5000 litrs capacity tank up to 4.00m height with lifting tools with rope and labour , making hole in tank , making long screw in g.i. pipe including supplying and fitting jam nuts and extra socket etc. , rising and distribution network with house connection up to 20 nos. including platform & stand post , earth work in excavation in foundation trenches in hard soil (vide classification soil item b) and disposal of excavated earth as obtained to a distance up to 50 mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of e/i. , dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all leads all complete , providing pccm 200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of fm 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of e/i. for construction of road cutting portion , rising main , manufacture, supply and delivery offollowing nominal dia upvc column pipes including pvc socket (coupler), , 65mm dia density of pipe 1.38 to 1.43 gm per cm3 od:74.5 to 75.2mm wall thickness end:9mm to 10.7mm, barrel 9mm to 10.7 mm, length: 3mtrs.rising main , 50 mm dia density of pipe 1.38 to 1.43 gm per cm3 od:87.5 to 88.2mm wall thickness end:9 .8 mm to 11.9mm, barrel 7.3mm to 9 mm, length: 3mtrs. delivery pipe , distribution , providing and supplying high density polyethylene pipe (hdpe pipe) of 20 mm to 225 mm od and pressure 6.0 kg/cm2 and 10 kg/cm2 suitable for water supply which is available in all standard conforming to isi 4984/14151/12786/13488,iso 4427 , din 8074materials rates are ex factory excluding transportation, taxes and duties. , 63 mm hdpe pipe , 50 mm hdpe pipe , 32 mm hdpe pipe , 20 mm hdpe pipe , providing and fixing gun metal gate valvewith c i wheel of approved quality(screwed end). , 65 mm dia , 50mm dia , providing and supplying high density polyethylene(hdpe )fittings of 20 mm to 225 mm od and pressure 6.0 kg/cm2 and 10 kg/cm2 suitable for water supply which is available in all standard conforming to isi 4984/14151/12786/13488,iso 4427 , din 8074materials rates are ex factory excluding transportation, taxes and duties. , lowering, laying and jointing h. d. p. e./m. d.p. e. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant is code complete with all materials for jointing procedure like electro fusion machine, electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per is 7634 part ii. , for rising , 50 mm hdpe pipe , 65 mm hdpe pipe , distribution , 65 mm hdpe pipe , 50 mm hdpe pipe , 32 mm hdpe pipe , 20 mm hdpe pipe , providing 15 mm dia. g.i. pipe tata or equivalent make as per is 1239 (part 1/2004) isi mark /medium quality in stand post. , supplying all materials , labour and tools for fixing 15 mm dia g.i. pipes with red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of engineer in charge. , supplying and fixing g.i. fittings of approved make all complete as per specification and direction of e/i. , elbow 15 mm dia. , reducer socket 20x15 mm dia. , nipple 15 mm dia. , plain socket 15 mm dia. , supplying and fixing g.m. ferrule of approved make in existing c.i./d.i. main including drilling and taping c.i./d.i. main all complete as per specification and direction of e/i. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram. , providing and fixing gun metal full way valve of approved quality, all complete, as per specification and direction of e/i. , 65 mm dia full way valve , 50 mm dia and weight not less than 1.5 kg. , providing and fixing of male ended c.i.body brass spindle valve and seat bib cock of approved quality with extra socketall complete as per specification and direction of e/i. , 15 dia and weight not less than 400 gm , constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with c. i. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design.with common burnt clay f.p.s.(non modular) bricks of class designation 7.5. full way valve chamber , supplying materials , labours and equipments for construction of 0.90m x 0.90 m size p.c.c. (1:2:4) rectangular platform with stand post in house including 12 mm thick cement plaster in c.m. (1:4) with neat cement punning over exposed surfaceall complete job, as per approved design, specification and direction of e/i. , providing brick masonry chamber ofinner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm r.c.c cover including cement plaster of exposed surface, etc all complete job , earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of engineer in charge. , providing fitting & fixing 32 mm to 50 mm service hdpe saddleall complete job, as per approved design, specification and direction of e/i. , carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of e/i. , cement lead 10 km (avg.) , sand lead 36 km (avg.) , stone chips lead 11 km (avg.) , steel reinforcement lead 10 km (avg.) , bricks lead 06 km (avg.) , solar photovoltaic (spv) solar submersible d.c. water motor pump , designing, supplying, installation, testing & commissioning with all tools & parts of following solar photovoltaic (spv) solar submersible d.c. water motor pump suitable for minimum 125mm x 115mm bore well as per mnre guideline with following specifications & accessories. , spv arrays contains specified no of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual pvmodules should be minimum 200 watt peak. , i) the spv modules should be as per iec 61215 and iec 61730 part 1.0) , ii) all external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required. , iii) the pv modules shouldbe mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & high wind pressure up to 200km/h. , iv) the module mounting structure should be hot dip galvanized according to is 4759. , v) to enhance the performance of spv water pumping system & arrangement for seasonal tilt angle adjustment should be provided , vi) necessary arrangement should be provided in controller automatic start run stop through out the day with water level detection system. (as per mnre specification) , vii) necessary protection such as lightening arrestor etc. should be provided to protect the controller & spv , viii) the suction/delivery pipe shall be upvc / h.d.p.e. pipes of appropriate size 60m or more as required minimum pressure rating of 8kg/sq cm pe 100 grade for pump up to 3hp & 10 kg/sq cm pe 100 grade for 5 hp. , ix) all cable used shall be as per is 694. suitable size of cable shall be used in sufficient length for inter connection between the spv array to spv controller and spv controller to solar power pump. provision of cable shall be as per is 14536. , x) the motor pump set should have a 5 years warranty. , xi) control panel suitable for motor pump with arrangement of dry run & over flow protection sensor, float switch & rain prevention box. (as per mnre specification) , xii) the spv controller must have ip 65 protection or must be housed in cabinet having at least ip 65 protection. , xiii) the system should be as per mnre guide line & eco friendly with suitable arrangement to operate new pump manually. , xiv) with third party inspection before dispatch. , xv) provision for web basedremote monitoring of the pumps to be installed must be made through the inbuilt controllers . it should be possible to ascertain the daily water output, the power generated by pv array ,the up and downtime of the pump during the year, number of days the pump was unused or under breakdown repairs. , the following details should be marked indelibly on the motor pump set , a) name of the manufacturer or distinctive logo. , b) model number. , c) serial number. , solar submersible motor pump (spv dc type) , i) 1 hp (dc pump) with 900 wp minimum watt p.v. panel as mnre pump head max shut off head up to 120 mtrs. for higher or lower head or in between various modules output could be decided on prorates basis. (as per latest guide line of mnre) , carrying out recuperation/yield test for ascertaining the discharge of constructed well/ excavated profile as directed by the iec. the testout by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of w.s. scheme shall be recorded prior to the test including cost of all materials, over load , labours etc. complete as directed. , supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old g.i. pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the t/w in good condition with all transportation including unused taken out materials back in store all complete job as per direction of e/i. (as per model estimate of solar energy based mini wss. ts done by se, ranchi circle & circle gumla dt. 21.05.2019) , provision of solar night lamp. , galvanised chain line mess fencing around solar panel where bore well is away from tower , making 30 cm (12) dia bore up to 4m below ground with hand auger of approved quality in ordinary soil (vide classification of soil item a) true to plum and without eccentricity in any stage of operation and disposal of the exacavated earth up to 50m lead including all lifts all complete as per approved design and direction of e/i. , providing pcc m 150 in nominal mix of (1:2:4) in foundationwith approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m.2.5 to 3 including screening shuttering, mixing cement concrete in mixer and placing in position, vibrating, curing, taxes and royalty all complete as per building specification direction of e/i. , labour cost of fitting and fixing galvanised chain link mess up height of 2 m including cost of staples (but excluding the cost of cement concete angle iron posts, its cutting and making holes, nuts and bolts) all complete as per specification and direction of e/i. , drilling 6mm dia holes in m.s angle iron for fixing of stables etc. as per building specification and direction of e/i. , labour cost cutting of m.s angle iron posts to required length, one end splitted as fish tailed in a length of 150mm complete as per building sepcification and direction of e/i. , supplying, fitting and fixing straining bolts with nut size 22cm*10mm dia tighten the barbed wire with corner post complete as per building specification and direction of e/i. , supplying, fitting and fixing galvanised chain link mess having 3mm thick wire cell type 40 x 40 mm fitted on m.s. angle frame with two diagonals having 25x25x5mm size angle including cost of fabrication, providing necessary bocking arrangement with haskal and domny duly fixed in angle post, applying a priming red lead paint over steel work, taxes excluding the cost of galvanised chain link mess all complete. , cost of galvanised chain link mess having 3 mm thick wire cell type 40x40 mm not less than 3.1 kg/sqm , cost of 50 x 50 x 6 mm m.s angle , carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of e/i. , cement lead 10 km (avg.) , sand lead 36 km (avg.) , stone chips lead 11 km (avg.) , steel reinforcement lead 10 km (avg.) , annual operation & maintenance cost based on existing d/t well with solarmotor pump for 5 years , o & m cost for 1st year (excluding repair charges) , o & m cost for 2nd year with annual repair charges , o & m cost for 3rd year , o & m cost for 4th year , o & m cost for 5th year , provision of one no sim card & its recharging cost for rmc , 18% gst , labour cess...

Bharat Coking Coal Limited - Jharkhand

37622638 shifting the submersible pump hanging pulleys at the platform of 02 no pit head gear for lifting submersible pump motor (break down) under burragarh colliery. ...

Central Coalfields Limited - Jharkhand

37604133 repairing of 85 hp,550 v, 500gpm submersible pump motor installed in old shaft for domestic water supply to grd project repairing of 85 hp,550 v, 500 gpm submersible pump motor installed in old shaft for domestic water supply to grd project...

Bharat Coking Coal Limited - Jharkhand

37583698 lifting, renovation/repairing and lowering of 7.5 hp submersible pump and motor complete set and other bore hole related work of bhimkhanali,under block ii area...

Bharat Coking Coal Limited - Jharkhand

37583667 lifting, renovation/repairing and lowering of 7.5 hp submersible pump and motor complete set of bore no 1 (near temple) sec i and bore no 4 (near pump house) at sec ii and other bore hole related work of dugda t/ship, block ii area...

Central Coalfields Limited - Jharkhand

37457625 laying and fitting of 80 mm dia gi pipe submersible pump to tank of water sprinkler pump at line no 01 and 50mm dia gi pipe from pump house to fog cannon at line no04 at shivpur railway siding of amrapali ocp, a c area...

Drinking Water And Sanitation Department - Jharkhand

37435741 tender for supply, installation, testing and commissioning of sh.p. submersible pump set. pipe line and its allied work at govt. building, cjm residence, dhanbad under d.w. &s. mech. division, dhanbad....

Drinking Water And Sanitation Department - Jharkhand

37406346 e quotation for seeking firm rates for non schedule items for preparing estimates of annual repair and maintenance of water supply system and sanitation t rinpas, kanke, ranchi under d.w and s mechanical division, ranchi. , cost towards providing all labours tools & techniciansfor dismantling and disconnecting of 40 hp kirloskar make motor and taken out rotor from motor stator cutting removing burnt and damaged coil and after repairing refitting the same etc all complete. , cost towards full rewinding of 40 hp motor stator with supplying of super enameled round copper conductor suitable gauge class f insulating materials making all connection taping, varnishing with dr beck varnish all complete with deducting the cost of taken out scrap materials ( wt. of wire is 18.5kg approx ) . , s / f ball bearing skf make 6312&6309 at de&nde side of 40 hp kirloskar make motor including proper greasing all complete. , cost towards providing all labour tools and tackles for dismantling of 40 hp single stage kirloskar make c / f pump with changing damaged parts such as gm neck ring as per size and sample 2 nos. shaft sleeve 2 nos. shaft sleeve check nut 2 nos. making ci bearing housing as per size and sample 2 nos. supplying and fitting ball wearing skf make 6309 2nos. making supplying and fitting ms gland tightner as per size and sample 2 pair making citric motion of rotating unit assembling on lathe m / c etc all complete , cost towards repairing of 40 hp l&t motor starter by supplying and fitting l&t make 3 core ml 4 power contactor 45 amp. with auxiliary contractor complete set 2nos. supplying and fitting timer type lt 100 1nos., over load relay suitable range 1nos.etc all complete. , cost towards providing all labours tools & technicians for taking out damaged 250amp. tpn hrc fuse type disconnector main switch replacing new disconnector fuse unit with hrc fuse 1 set doing electrical connection and testing on full load after deducting the cost of taken out scrap materials , supplying and fitting 6”dia tyre coupling complete set with nut bolt washer and tyre of reputed make for 40 hp pump set. , cost towards providing all labour tools and tackles for dismantling and taken out damaged nr valve and s / f 4”dia c.i df nr valve heavy duty rating pn 1 isi marked on delivery pipe line with all work including cost of labour charge all complete testing on full load with deducting the cost of scrap materials. , cost towards supplying and laying 50 mm² x 3.5 core aluminium armoured cable from main switch to industrial panel. ( both sets ) . , cost towards supplying and laying 16 mm² x 3 core copper cable from panel to starter and starter to motor in bunch of two. ( both sets ) . , cost towards replacing damaged suction pipe by making supply & fitting 100 mm dia heavy duty m.s. suction pipe 10feet long both and 100 mm dia m.s. flange welding, 100mm dia long bend 1 no with nut bolt rubber insertion etc required for the job. , transportation charge of above p / set from work site to work shop and vice versa including loading and unloading charge. , cost towards dismantling of 100 hp wpil make single stage c / f pump and taking out its rotating unit assembly with changing of damaged parts by new making s / f neck ring as per sample size 2 nos, c.i shaft sleeve as per sample size – 2nos, making s / f shaft sleeve check nut as per sample size – 2 nos , s / fball bearing skf 6309 2 nos and repairing of bearinghousing by welding turning machining as per bearing size 2 nos, c.i gland tightner as per sample size – 2nos including cost of reassembling of rotating unit assembly balancing rotating unit assembly and fitting the pump with supply of grease gland packing oil packing paper with transporting cost of rotating unit from p / plant to workshop and back , cost toward supplying fitting & changing of 100 hp jyoti make motor ball bearing skf 6316 at de side 1 no. and sk 6314 nde 1 no. with grease. , cost towards repairing of 100 hp l & t make f.a.s.d starter with s / f contactor set 2 sets ) , relay unit ( 85 135a ) 1set, timer unit 1 set, making new connection etc all complete. , supplying and fitting 6”dia tyre coupling complete set with nut bolt washer and tyre of reputed make for 100 hp pump set. , cost towards supplying and fitting mccb 630 amp. for bus bar make l&t schneider / bch , cost towards supplying and fitting mccb 250 amp. for bus bar make l&t schneider / bch , cost toward supplying fitting & changing 100mm dia cidf sluice valve ( pn 1 ) 1 set & cidf nr valve ( pn 1 ) 1 no. including fitting charge , cost toward supplying fitting & changing 150 mm dia ci foot valve hiding single leather flat and gun metal seating all complete. , submersible pump sets , cost towards providing all labour tools and technicians for dismantling and taken out 5hp submersible p / set with column pipe for bore well. , cost towards repairing of5 hp submersible pump with s / f norylimpeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i. suction casing, c.i nrv etc. all complete ( 23 stage ) after the deduction of cost of scrape materials. , cost towards for rewinding and repairing of5 hp submersible motor with s / f 1.2 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrape materials. , supplying all material such as 40 mm dia g.i. pipe medium quality 15 ft. long, charcoal salt etc. for making earthing station as per i.e. rule , cost towards replacement of old and damaged underground service line by supplying new overhead line 10 mm² 3core copper wire after the deduction of cost of scrap materials. , supplying and laying ( under and over ground ) 2 dia aqua gold weather proof pvc pipe from bore well to main rising pipe line ( damaged pipe replacement ) make supreme / isi mark ( both sets ) , supplying and laying ground and on wall 10 swg, g.i. wire for doing continuous earthing for all electrical equipments , cost towards s / f and changing of 2”dia upvc column pipe with heavy duty socket ( make supreme / paras ) for both sets. , cost towards replacement of damaged submersible cable by supplying and fitting 4 mm2x 3 core flat submersible cable including cable jointing all complete. after the deduction of cost of scrape materials. , providing all labour, tools tackles& technicians for lowering of 5hp submersible pump set with all accessories in the bore well , cost towards supplying and fitting ( 1 ) 50 mm dia g.m. full way valve – 1 no ( 2 ) 40 mm dia nr valve – 1 no ( 3 ) 40 mm dia g.i. bend ( 4 ) 2” dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrape , supplying and installation suitable size panel board for 5 hp submersible pump including fixing on wall comprising of following points such as ( 1 ) d.o.l starter 1no. ( 2 ) hrc fuse – 3 no. ( 3 ) voltmeter with selector switch – 1 set ( 4 ) ammeter with selector switch – 1 set ( 5 ) phase indicating neon lamp – 3 nos. etc. all complete after the deduction of cost of scrap materials. , supplying and fitting union 1.5 dia , supplying and fitting elbow 1.5 dia , supplying and fittingtee 1.5 dia , supplying and fitting socket 1.5 dia , supplying and fitting upvc valve 1.5 dia , transportation charge of above p / set from work site to work shop and vice versa including loading and unloading charge....

Drinking Water And Sanitation Department - Jharkhand

37326781 e quotation for seeking firm rates for non schedule items for preparing estimates.annual repair and maintenance of water supply system and sanitation at t.b. sanatorium itki under d.w. & s. mechanical division ranchi. annual repair and maintenance of water supply system and sanitation at t.b. sanatorium itki under d.w. and s. mechanical division ranchi. , provision leake repairing of different and size of upvc sch 80 pipe in place of existing / cracked and damaged pipe of isi approved make or equivalent make damaged pipe in trenchage and replacement of pipe and fitting so as to give. i m average cover over the socket of pipes with disposal of excavated earth within initial lead and lift and necessary fitting and earth work in backfilling and cutting pipe to size etc. all complete as per specification and direction of e / i. , leakage in 50 mm dia upvc pipe , leakage in 40 mm dia upvc pipe , leakage in 32 mm dia upvc pipe , leakage in 25 mm dia upvc pipe , leakage in 20 mm dia upvc pipe , provision leake repairing of different and size of upvc sch 80 pipe in place of existing / cracked and damaged pipe with red lead and yarn of following nominal bore screwed and socketed joints on wall, ceiling and floor including supplying and fitting on wall hooks or pipe clamp wooden plugs, cutting pipe to size and threading ends where necessary etc. all complete as per specification and direction of e / i. , leakage in 50 mm dia upvc pipe , leakage in 40 mm dia upvc pipe , leakage in 32 mm dia upvc pipe , leakage in 25 mm dia upvc pipe , leakage in 20 mm dia upvc pipe , supplying and flaxing u pvc ball valve of approved make all complete as per direction of e / i. , 50 mm dia u pvc ball valve , 40 mm dia u pvc ball valve , 32 mm dia u pvc ball valve , 25 mm dia u pvc ball valve , 20 mm dia u pvc ball valve , supplying of materials for c.p. bathroom fitting ( as per schedule rate ) to consumrtion day to day work. , 15mm dia c.p. bib cock ( long thread ) , 15mm dia c.p. pillar cock ( long thread ) , 15mm dia c.p. angular stop cock ( long thread ) , 15mm dia cp basin mixture , 15mm dia cp wall mixture , jet sprey , health faucet , bib cock spindle , a ) medium size , b ) large size , mirror , towel rail , soap dish , 32mm dia cp waste : , 32mm dia pvc waste pipe 750mm long with coupling : , 100mm dia c.p. jali : , 15mm dia and 45cm long pvc connection pipe : , sink waste , cistern ball cock , cistern handle , pvc water storage tank cover ( 2000 / 1000 l ) , 25mm dia ball cock set for pvc tank , cammod cover , m seal , waste pipe bundla , 10 lit pvc l / d cistern , flush bend , basin , supplying, fitting and fixing pvc pipes of approved make including supplying nails, clips and pvc washer cement & yarn for making plumber joints properly cutting pipe to sizes including earth work of scaffolding etc. where necessary etc. all complete as per specification and direction of e / i. , 100mm dia pvc sewer pipe , 75mm dia pvc sewer pipe , supplying and fixing pvc fitting of approved make confirming to isi including supplying nails and bobbins from making solvent cement solution or gasket joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of e / i. , 110mm swr nahani trap , 110mm swr plain bend , 110mm swr door bend , 110mm swr plain tee , 110mm swr door tee , 75mm swr plain bend , 75mm swr door bend , 75mm swr plain tee , 75mm swr door tee , supplying all materials , labours, tools and equipment for laying upvc pipesof approved make in trenches with upvc solvent solution with socket and screw joints and cutting pipe as per size and threading ends where necessary etc. all complete as per specification and direction of e / i. ( in trenches ) , 50mm dia. upvc schedule 80 pipe ( in trenches ) [ make supreme / ashirwad / paras ] , 25mm dia. upvc schedule 80 pipe ( in trenches ) [ make supreme / ashirwad / paras ] , 40mm dia. upvc schedule 80 pipe ( in wall&overground ) [ make supreme / ashirwad / paras ] , supplying and fixing upvc fittings of approved make all complete as per specification and direction of e / i. , a ) upvc elbow ( 90 degree ) 50mm dia. upvc , 40mm dia upvc , 25mm dia upvc , b ) tee plain 50mm dia. upvc , 40mm dia upvc , 25mm dia upvc , c ) reducing bush 50mm x 25mm dia. upvc. , 50mm x 40mm dia upvc , 40mm x 25mm dia upvc , d ) reducing tee 50mm x 25mm dia. upvc. , 40mm dia upvc , 25mm dia upvc , e ) upvc socket 50mm dia. upvc , 40mm dia. upvc , 25mm dia upvc , f ) union socket ( upvc ) 50mm dia. upvc , 40mm dia upvc , 25mm dia upvc , providing all material, equipment and wash out and cleaning of 2000 / 1000 litre pvc water storage tank including rubbing the wall of tank by the help of coconut, rushi and bleaching powder their washing by clean water all complete as per direction of e / i. , 3000 litre capacity hdpe w / s / tank 2 time x 3000 liter x 2 nos. = 12000.00 liter 2000 litre capacity hdpe w / s / tank 2 time x 2000 liter x 88 nos. = 372000.00 liter 1000 litre capacity hdpe w / s / tank 2 time x 1000 liter x 9 nos. = 18000.00 liter total = 402000.00 liter , 10 hp c / f pump set , cost for complete rewinding of 10 h.p sq. cage induction motor operated on 415v, 3 phase, 50 c / s 1460 rpm with supply fitting of super enameled copper wire and other required insulation materials, heating assembly of the motor and testing on load ( wt of burnt coil 5.5 kg ) , cost for dismantling of 10 h.p c / f pump checking and changing of its damaged parts such as pump shaft of en 9 materials 01 no. key 02 nos. gland tightner 2 sets, gland tightner stud 4 nos. c.i bearing housing with cap 2 sets, ball bearing 6306 ( skf ) 2 nos. casing stud 16 mm sq. x 80 mm long with nut 8 nos. packing paper. grease, gland packing etc all complete and testing on load. , cost for supply and fitting of 3 dia tyre coupling complete set with nut, bolt & tyre. all complete. , cost for supply and fitting of 4 dia g.m flap tyre foot valve with packing and nut & bolt 4 nos. etc all complete. , cost for supply and fitting of 3 dia cidf heavy duty sluice valve, isi marked , cost for overhauling and repairing of motor control panel and changing of its damaged parts such as contactor ( ml 4 ) 3 nos., vm 02 nos., am 01, selector switch 2 nos, 100 amp mccb – 1 no, etc all complete and testing on load. , 3 h.p. submersible p / set , providing all labour, tools, tackles and technicians for taking out 3 h.p. submersible pump set with column pipe for bore well , cost towards for rewinding and repairing of 3 h.p submersible motor with s / f suitable winding wire, bronze bush etc. all complete after the deduction of cost of scrape materials. , cost towards repairing of 3 h.p. submersible pump with s / f bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrape materials. , cost towards replacement of damaged submersible cable by supplying and fitting 2.5 mm2x 3 core flat submersible cable including cable jointing all complete for both set. after the deduction of cost of scrape materials. , cost towards supplying fitting, changing 2” dia g.i. column pipe with heavy duty socket ( make zindal / tata ) after the deduction of cost of scrape materials. , cost towards supplying and fitting ( 1 ) 2 dia g.m. full way valve – 1 no ( 2 ) 2 dia nr valve – 1 no ( 3 ) 2 dia g.i. bend 2 nos. ( 4 ) 2” dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrape materials. , providing all labour, tools tackles and technicians for lowering of 3 h.p submersible pump set with all accessories in the bore well , 5 h.p. / 7.5 h.p. submersible p / set , providing all labour, tools, tackles and technicians for taking out 5 h.p. submersible pump set with column pipe ( 280 ) from bore well , cost towards for rewinding and repairing of5 hp submersible motor with s / f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrape materials. , cost towards repairing of 5 hp submersible pump with s / f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete ( 23 stage ) after the deduction of cost of scrape materials. , cost towards replacement of damaged submersible cable by supplying and fitting 4 mm2x 3 core flat submersible cable including cable jointing all complete. after the deduction of cost of scrape materials. , cost towards supplying fitting, changing 2” dia g.i. column pipe with heavy duty socket ( make zindal / tata ) after the deduction of cost of scrape materials. , cost towards supplying and fitting ( 1 ) 50 mm dia g.m. full way valve – 2 no ( 2 ) 50 mm dia nr valve – 1 no ( 3 ) 50 mm dia g.i. bend ( 4 ) 2” dia m.s. clamp with nut bolt – 2 pair after the deduction of cost of scrape materials. , supplying and laying ground and on wall 10 swg, g.i. wire for doing continuous earthing for all electrical equipments , providing all labour, tools tackles and technicians for lowering ( 280 ) of 5 h.p.submersible pump set with all accessories in the bore well , supplying and installation suitable size panel board for 5 h.p. submersible pump including fixing on wall comparising of following points such as ( 1 ) d.o.l starter – 1 no. ( 2 ) hrc fuse – 3 no. ( 3 ) volt meter with selector witch 1 set ( 4 ) ammeter with selection switch – 1 set ( 5 ) zindicating neon lamp – 3 no. etc. all complete after the deduction of cost of scrape materials....

Department Of Fertilizers - Jharkhand

37323541 bids are invited for submersible pumps, power cable, discharge canvas hose, control panel, trolley, self priming non clog dew total quantity : 378...

Ministry Of Power - Jharkhand

37268948 bids are invited for supply cum installation of fast dewatering pump barge mounted pump 1250 m3 and 200 m mi , hdpe ms pipe of 250 mm dia , 6.6 kv vcb panel , 6.6 kv 3 corex185 mm2 xlpe ar cable , portable type submersible pump 10 hp and , mandatory spares total quantity : 9018...

Ministry Of Coal - Jharkhand

37267791 bids are invited for pullen pumps auto transformer for 120hp submersible pump , auto transformer for 180hp submersible pump purchase of auto transformer for ubmersible total quantity : 4...

Bharat Coking Coal Limited - Jharkhand

37247735 maintenance contract for repairing of submersible pumps/motor sets and surface motors installed for water supply under civil engineering department for 2 years...