Drinking Water And Sanitation Department - Jharkhand

32583653 complete renovation work with supply installation testing and commissioning of pump sets, motor control panels, cables and its allied works at raw water and clear water pumping plant at multi village rural water supply scheme, pandra 1.a raw water pumping plant: 1.01 cost towards supplying, installation, testing and commissioning of electrically driven horizontal split casing centrifugal pump set make ( kirloskar / wpil / mather & plate / jyoti ) coupled with tefc sq. cage induction motor make ( kirloskar / crompton / jyoti / abb ) operated on 415 + 10% volts, 50hz, 1470 rpm mounted on common m.s. fabricated base plate with 4dia or suitable size of cidf sluice valve 1 no, cidf nr valve 1 no, foot valve 1 no, pressure gauge 1 no, tyre coupling 1 no etc all complete. head 18 m discharge 120 m3 / h ( hp 15 approx ) 1.02 supplying all labour tools and tackles for taking out old and damaged c / f pump set with all accessories , demolition of foundation for installation of new hsc centrifugal pump sets. 1.03 supplying all labour tools and tackles for making new pcc foundation of size 4′ x 2.5 x 2.5′ with all materials such as cement , sand, stone chips, foundation bolt 6 nos etc all complete and plastering and punning over exposed surface with all labour tools, tackles and technician charges. 1.04 cost for supply and laying of suction pipe line with supplying of 5 dia or suitable dia size as per pump at site, heavy duty g.i. pipe 6 m, bend 2 nos., flange 6 nos., nut, bolt, washer 10kg, rubber insertion 5kg etc, cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges. with cp & ohc. ( rate after deducting the scrap materials. ) 1.05 cost for supply and laying of 4dia delivery pipe line with supplying of 4 dia or suitable dia size as per pump at site, heavy duty g.i. pipe 6m, bend 1 nos., flange 4 nos., nut, bolt, washer 5kg, rubber insertion 5kg etc, cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges. with cp & ohc. ( rate after deducting the scrap materials. ) 1.06 cost for supplying and laying of 3 core x 10 mm2, pvc insulated and pvc sheathed unarmoured copper cable of 1.1 kv grade. from panel to motor in 2 length each for both motor. with cp and ohc. 1.07 socketing of terminal ends with s / f of terminal socket including all labour , tools and tackles. 3 core x 10 mm2copper cable. 1.08 cost for supplying and laying of 3.5 core x 25 mm2, pvc insulated and pvc sheathed armoured aluminum cable of 1.1 kv grade. from electric pole to panel with cp and ohc. 1.09 socketing of terminal ends with s / f of terminal socket including all labour , tools and tackles. 3.5 core x 25 mm2aluminium cable. 1.10 cost towards supplying, installation, testing and commissioning of tpn main switch / isolator of 100a , make ( havells / schnieder / l&t / any reputed make isi marked. ) . 1.11 providing floor / wall mounted cubical l.t motor control panel fabricated with ms sheet and painted, dust and vermin proof, proper ventilated, consisting of – proper distribution 100 amp copper bus bar 4 pole 1 set micro processor base tpn mccb 100 amp l&t / siemens make with earth fault relay for incoming feeder – 1no. mccb 63 amp tpn type l&t / siemens make for outgoing feeder 3 nos. ( 1no for each pump sets+1 no. as spare ) suitable size of fully automatic star delta starter make l&t / bch / schnider make 3nos. 0 500 v voltmeter with selector switch 3nos ct operated ampere meter ( 0 200a ) with ct 3 sets with selector switch 3 nos, phase indicating neon lamp 9 nos., s.p.p. 3 nos. doing internal wiring with proper gauge of copper wire etc all complete job and testing on load. 1.12 cost for doing chemical earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry with cover plate having locking arrangements and watering pipe 2.7 meter long etc with charcoal / coke and salt as required for chemical earthing. 1.13 supplying and laying of 8 swg copper wire / gi wire for making earthing connection in to from earthing station to panel to motor . 1.14 cost towards doing complete electric wiring inside and outside of pump house with s / f of copper cable, switches, bulb holder, sockets, indicator lamp, led bulb 2, led tube light 1no., 40w led flood light 1no. etc all complete including transportation and electrician charges. 1.b clear water pumping plant: 1.01 cost towards supplying, installation, testing and commissioning of electrically driven horizontal split casing centrifugal pump set make ( kirloskar / wpil / mather & plate / jyoti ) coupled with tefc sq. cage induction motor make ( kirloskar / crompton / jyoti / abb ) operated on 415 + 10% volts, 50hz, 1470 rpm mounted on common m.s. fabricated base plate with suitable size of cidf sluice valve 1 no, cidf nr valve 1 no, foot valve 1 no, pressure gauge 1 no, tyre coupling 1 no etc all complete. head 50 m discharge 54 m3 / h ( hp 20 approx ) 1.02 supplying all labour tools and tackles for taking out old and damaged c / f pump set with all accessories , demolition of foundation for installation of new hsc centrifugal pump sets. 1.03 supplying all labour tools and tackles for making new pcc foundtiaon 2nos, of size 5′x3x3′ with all materials such as cement , sand, stone chips, foundation bolt 6nos etc all complete and plastering and punning over exposed surface. 1.04 cost for supply and laying of suction pipe line with supplying of 4 dia or suitable dia size as per pump at site heavy duty g.i. pipe 6m, bend 2 nos., flange 6 nos., nut, bolt, washer 10kg, rubber insertion 5kg etc, cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges.with cp & ohc. ( rate after deducting the scrap materials. ) 1.05 cost for supply and laying of 3dia delivery pipe line with supplying of 3 dia or suitable dia size as per pump at site heavy duty g.i. pipe 6m, bend 1 nos., flange 4 nos., nut, bolt, washer 5kg, rubber insertion 5kg etc, cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges. with cp & ohc. ( rate after deducting the scrap materials. ) for pump house no 1 & 2. 1.06 cost for supplying and laying of 3 core x 10 mm2, pvc insulated and pvc sheathed unarmoured copper cable of 1.1 kv grade. from panel to motor in 2 length each for both motor for both pump house with cp and ohc. 1.07 socketing of terminal ends with s / f of terminal socket including all labour tools and tackles. 3 core x 6 mm2, copper cable 24 ends. 1.08 providing floor / wall mounted cubical l.t motor control panel fabricated with ms sheet and painted, dust and vermin proof, proper ventilated, consisting of – proper distribution 100 amp copper bus bar 4 pole 1 set micro processor base tpn mccb 100 amp l&t / siemens make with earth fault relay for incoming feeder – 1no. mccb 63 amp tpn type l&t / siemens make for outgoing feeder 2 nos. ( 1no for each pump sets ) suitable size of fully automatic star delta starter make l&t / bch / schnider make 2 nos. 0 500 v voltmeter with selector switch 2nos ct operated ampere meter ( 0 200a ) with ct 2 sets with selector switch 2nos, phase indicating neon lamp 6nos, s.p.p. 2nos doing internal wiring with proper gauge of copper wire etc all complete job and testing on load. 1.09 cost towards supplying, installation, testing and commissioning of tpn main switch / isolator of 100a , make ( havells / schnieder / l&t / any reputed make isi marked. ) . each for pump house no 1 &2. 1.10 cost for supplying and laying of 3.5 core x 50 mm2, pvc insulated and pvc sheathed armoured aluminum cable of 1.1 kv grade. from electric pole to panel with cp and ohc. for pump house no 1 &2. 1.11 socketing of terminal ends with s / f of terminal socket including all labour , tools and tackles. 3.5 core x 50 mm2aluminium cable. 1.12 cost for doing chemical earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry with cover plate having locking arrangements and watering pipe 2.7 meter long etc with charcoal / coke and salt as required for chemical earthing. 1.13 supplying and laying of 8 swg copper wire for making earthing connection in two from earthing station to panel to motor . 1.14 cost of doing internal electric wiring with s / f of 3 / 20 single core copper cable with s / f of on off switches, indicator, fuses, sockets, switch board, junction boxes, pvc casing, nails & allied fittings etc including supplying and fixing 40 watt led tube light 2 nos, 12w led bulb 2 nos with all fittings etc including electrician charges for raw water pumping plant, clear water pumping plant pump house no 1&2 and outside of pump house etc all complete. 1.15 cost supplying and fixing of 40 watt led flood light with bracket with all fittings and accessories etc all complete for clear water premises. with c.p. & ohc. [ make havells / syska / mescab / bajaj / any reputed make. ] 2 supplying, installation, testing and commissioning of 2 set of new 175 hp vt pump sets and its allied work at raw water pumping plant , multi panchayat rural water supply scheme madhuban pirtand 2.01 supplying, installation, testing and commissioning of water lubricated vertical turbine pump [ make: kirloskar / mather & platt / jyoti / wpil ] capable of discharging 45 lps raw water against a total head of 185 meter at speed not more than 1500 rpm as per is: 1710 / 1989 with column length not less than 50 ft in 5ft each with closed type ss impeller, ss line shaft, ss shaft sleeves, flanged type ms column pipes suitable for below the floor installation and existing delivery header coupled with vertical hollow shaft operated on 415v±10%, 3 phase, ac, 50±5%hz, 4 pole, duty s1, insulation f, lt squirrel cage induction motor with suitable size of coupling as per latest is specification [ make: abb / bhel / crompton / marathon / jyoti / kirloskar ] having 10% more bhp than the pump, making alignment, making electrical connections, with all required tools, tackles, consumables as required, testing and commissioning on full load as per the direction of e / i. etc all complete. 2.02 cost towards dismantling, lifting of old 175 hp pump sets with all 200 mm dia column pipes from intake well and lowering new pump sets with all accessories along with all labour tools and tackles etc all complete. 2.03 cost towards breaking of old pcc foundation and removing of all garbage from pump house to outside with lead of 300 m with all labour tools and tackles etc all complete. 2.04 cost towards making of new pcc foundation sizing 3 x 3 x 1 with supplying and fitting of foundation bolt 4nos., cement, sand , stone chips, as required and plastering and punning over exposed surface etc with materials, all labour tools and tackles etc all complete. 2.05 cost towards supply and laying of 3c x 95 sq. mm copper cable, pvc insulated & pvc sheathed, 1100v grade, isi marked, make.havells / polycab / finolex / gemscab / any reputed make for 3 pump sets. 2.06 socketing of terminal ends with s / f of terminal socket including all labour , tools and tackles. 3 core x 95mm2, copper cable 12 ends. 2.07 providing floor mounted cubical l.t motor control panel fabricated with ms sheet and painted, dust and vermin proof, proper ventilated, consisting of – ( a ) incoming: ( i ) proper distribution 800 amp copper bus bar 4 pole 1 set ( ii ) mccb 800 amp. acb, make l&t / siemens for incoming feeder 1no. ( iii ) 0 500 v voltmeter 1no. with selector switch 1 no, ct operated ampere meter ( 0 500a ) 1no. selector switch 1 no, phase indicating neon lamp 3 nos. b ) outgoing: i ) mccb 630 amp. tpn type, make l&t / siemens for outgoing feeder 3 nos. ( 01 no for each pump set ) ii ) suitable size of fasd starter l&t / bch / schneider make 3 nos. iii ) 0 500 v voltmeter 3nos. with selector switch 3 nos, ct operated ampere meter ( 0 500a ) 3nos. selector switch 3 nos, phase indicating neon lamp 9 nos, single phase preventor 3 nos., doing internal wiring with proper gauge of copper wire etc all complete job with testing on full load. 2.08 cost towards supplying and fixing 5 ton capacity, triple spur gear type chain pulley block suitable for capacity as below with 6 meter lift complete with load chain and hand chain suitable for above lift , tested to 50% over load as per is 3832 carrying isi mark with travelling trolley etc. 3 repairing and overhauling of motor control panels, pump sets and its allied works at clear water pumping plant at maithan ( 14.5mld wtp ) of dhanbad urban water supply scheme phase ii 3.01 cost towards repairing and complete overhauling of motor control panel with all labour tool, tackles and technician charges for disconnecting the electric line & opening of electric wire connection inside panel. cleaning, checking, rectifying of faults with supply and fitting of contacter set ( 3tf56 1no and 3tf53 2no. ) seimens make or equivalent capacity of isi marked reputed make, over load relay 1no., transformer oil 30 liter, changing of ampere meter, voltmeter, indicating lamps etc all complete work, dressing and doing fresh electric connection with new wire and connector inside panel, rechecking of all connections and testing on full load. ( rate after deducting the cost of scrap materials ) . 3.02 cost towards repairing and overhauling of 150hp centrifugal pump and changing of its damaged parts such as pump shaft of en9 materials 1no., ss gland bush 2nos., neckring bush 2nos., checknut 2nos., bearing housing of c.i. materials 2nos. as per sample, supply and fitting of ball bearing skf make 6311 2nos. etc with all labour, tools and tackles, transporting etc all complete. ( rate after deducting the cost of scrap materials ) . 3.03 cost towards overhauling and repairing of 150hp, 3phase induction motor operated on 415v, 50hz, with dismantling of motor, heating, varnishing, supplying and fitting of lead bit having 4 nos hole including supply and fitting of brass nut bolt of 24mm in length with suitable dia for both ends terminal ( motor joint box end & mcp end ) for 150hp motor, supply and fitting of skf make 6319 ball bearing 2nos. etc all complete assembly of the motor and testing on load with all labour, tools and tackles, transporting etc all complete. ( rate after deducting the cost of scrap materials ) . 3.04 cost towards supply and laying of 3 c x 120 sq. mm copper, xlpe unarmoured cable, 1100v grade, from starter panel to motor for 4nos. motor. [ make polycab / finolex / havells / kei / gemscab / any reputed make ] with c.p and ohc etc. [ jsor dwsd 2021 146 m1062 6 ] 3.05 cost towards making cable mouth for above cable with s / f of lugs, pvc tape etc including all labour, tools, tackle and technician charges etc all complete 3.06 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonary with cover plate having locking arrangements and watering pipe 2.7 meter long etc with charcoal / coke and salt as required for chemical earthing. 3.07 supplying and laying of 8 swg copper wire for making earthing connection in to from earthing station to panel to motor . 3.08 cost towards supplying, installation, testing and commissioning of 40 watt semi integrated solar street light luminary including battery inside, g.i. pole 6mtrs, structure, arms , nut & bolts etc, suitable spv modules, 2.5 sq. mm x 2 core wire for connection with all labours, tools and tackles etc all complete. [ make havells / exide / any isi marked reputed make ] with cp & ohc. 3.09 cost towards supplying and laying of 2c x 2.5 sq. mm, pvc insulated and pvc round sheathed, copper conductor ( flexible ) industrial cable, 1100 volt, isi marked for common line for all 20nos. flood light as above. [ make havells / polycab / finolex / rr ] with cp & ohc. 4 renovation with supply installation testing and commissioning of pump set, overhauling of motor control panel and its allied work at rural water supply scheme, chirkunda kumardhubi, maithan ( old scheme ) 4. ( a ) raw water pumping plant : 4.01 cost towards supplying, installation, testing and commissioning of electrically driven horizontal split casing centrifugal pump set make ( kirloskar / wpil / mather & plate / jyoti ) coupled with tefc sq. cage induction motor make ( kirloskar / crompton / jyoti / abb ) operated on 415 + 10% volts, 50hz, 1470 rpm mounted on common m.s. fabricated base plate with suitable size of cidf sluice valve 1 no, cidf nr valve 1 no, foot valve 1 no, pressure gauge 1 no, tyre coupling 1 no etc all complete. head 50 m discharge 275 m3 / h ( hp 100 approx ) 4.02 supplying all labour tools and tackles for taking out old and damaged c / f pump set with all accessories , demolition of foundation for installation of new hsc centrifugal pump sets. 4.03 supplying all labour tools and tackles for making new pcc foundtiaon of size 6′ x 3 x 3′ with all materials such as cement , sand, stone chips, foundation bolt 6nos etc all complete and plastering and punning over exposed surface with all labour, tools, tackle and technician charges. 4.04 cost towards supply and laying of suction pipe line with s / f of 10 dia g.i. pipe 2 meter, 10 dia g.i. bend 1 no., 10dia g.i. flange 4nos., rubber insertion 10kg, nut, bolt & washer 10kg etc and cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges.with cp & ohc. ( rate after deducting the scrap materials. ) 4.05 cost towards supply and laying of 8dia delivery line with s / f of 8 dia heavy duty g.i. pipe 1 meter, 8dia g.i. flange 4nos., rubber insertion 10kg, nut, bolt & washer 10kg etc and cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges.with cp & ohc. ( rate after deducting the scrap materials. ) 4.06 cost towards overhauling of motor control panel with all labour tool, tackles and technician charges for disconnecting the electric line & opening of electric wire connection inside panel. cleaning, checking, rectifying of faults with supply and fitting of damaged spares such as bus bar 1set, ampere meter 1no., voltmeter 1no., indicating lamps 3 no. etc, dressing of motor cables with new lugs, crimping works etc all complete and testing on full load. ( rate after deducting the cost of scrap materials ) . 4.07 cost towards overhauling of f.a.s.d. starter panel with all labour tool, tackles and technician charges for disconnecting the electric line & opening of electric wire connection inside panel. cleaning, checking, rectifying of faults with supply and fitting of contacter set ( ml 4 1no and ml 6 1no. ) l&t make or equivalent capacity of isi marked reputed make, over load relay 1no., timer 1no., spp 1no. etc all complete work, dressing and doing fresh electric connection with new wire and connector inside panel, rechecking of all connections and testing on full load. ( rate after deducting the cost of scrap materials ) . 4.08 cost towards supplying and fitting of 40w led flood light, with bracket, copper wire, on off switch etc with all accessories including all labour tools , tackles and technician charges., with cp & ohc, ( rate after deducting the scrap materials. ) . make havells / syska / mescab / polycab / phillips 4.09 providing chipping work on the roof surface of raw water pump house, removing of all garbage to outside with lead of 50 m , providing and cleaning of concrete surface to remove dust and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. pounding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. on identification of seepage, cement grouting to be done with non shrink expanding admixture of sika lndia pvt.ltd. / myk schomberg / dr fixit / fosroc or equivalent. [ size 12.5 m x 6.7 m = 83.75 m2 ] 4.10 cost towards providing pcc m 200 in nominal mix of 1:1.5:3 on roof with approved quality of stone chips 12mm to 6mm size graded and clean course sand of fm 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of e / i. [ size 12.5 m x 6.7 m x 0.05 m= 4.19 m3 ] 4.11 providing 12 mm thick water proof cement plaster ( 1:3 ) with clean coarse sand of f m. 1.5 with integral water proofing compound liquid @125 ml per bag cement including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of e / i. brand fosroc conplast x421 lc, sika plastocrate plus, dr fixit pidiproof lw+, myk proof wp 10 or equivalent. [ size 12.5 m x 6.7 m = 83.75 m2 ] 4.12 dismantling old plaster and pointing in cement or lime and taking out joints to 15mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of e / i. inside and outside of pump house, approx=280m2 4.13 providing 6mm thick cement plaster ( 1:4 ) in ceiling and wall of building with clean coarse sand of f.m. 15 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of e / i. 4.14 providing two coats of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls , scaffolding, curing and taxes all complete as per building specification and direction of e / i. 4.15 providing 2 ( two ) coats of synthetic enamel paint of approved shade & make over steel surface including cleaning the surface, removing dirt, scales, smokes, grease, scaffolding & taxes all complete as per building specification and direction of e / i. for door, window, common header pipe, valves etc. approx 20m2 ( b ) clear water pumping plant : 4.01 cost towards supplying and fitting of complete rotating assembly for 50hp centrifugal pump, having head 65m discharge 113.5 m3 / hr make kirloskar with ss pump shaft, c.i. impeller, ss sleeve, bushes, gland tightener 2nos., ball bearing etc all complete with machining as per size and sample, assembling and fitting on the base plate, with all labour tools tackles and technician charges. ( rate after deducting the scrap materials. ) 4.02 cost towards supplying and fitting of complete rotating assembly for 50hp centrifugal pump, having head 70 m discharge 114 m3 / hr make wpil with ss pump shaft, c.i. impeller, ss sleeve, bushes, gland tightener 2nos., ball bearing etc all complete with machining as per size and sample, assembling and fitting on the base plate, with all labour tools tackles and technician charges. ( rate after deducting the scrap materials. ) 4.03 cost towards supplying and fitting of complete rotating assembly for 60hp centrifugal pump, having head 70 m discharge 160 m3 / hr make mather & platt with ss pump shaft, c.i. impeller, ss sleeve, bushes, gland tightener 2nos., ball bearing etc all complete with machining as per size and sample, assembling and fitting on the base plate, with all labour tools tackles and technician charges. ( rate after deducting the scrap materials. ) 4.04 cost towards supply and fitting of 4dia coupling set for 50hp pump set with nut bolt etc all complete. 4.05 cost towards supply and fitting of 4dia coupling set for 60hp pump set with nut bolt etc all complete. 4.06 supplying, fitting, installation, erecting and commissioning of approved make h.t. outdoor type gang operated air break triple pole switch, suitable for 11kv line, rotating type, with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps including cp, ohc , transportation, labour charges etc. ( rate after deducting the scrap materials. ) 4.07 cost towards supplying and fitting of 250a mccb, 3phase, 50hz, isi marked, with all labour tools , tackles and technician charges. with cp & ohc, ( rate after deducting the scrap materials. ) . make l&t / abb / hpl / cg 4.08 cost towards supplying and fitting of 160a mccb, 3phase, 50hz, isi marked, with all labour tools , tackles and technician charges. with cp & ohc, ( rate after deducting the scrap materials. ) . make l&t / abb / hpl / cg 4.09 cost towards overhauling of motor control panel cum 3 nos. of f.a.s.d. starter panel with all labour tool, tackles and technician charges for disconnecting the electric line & opening of electric wire connection inside panel. cleaning, checking, rectifying of faults of 3nos. f.a.s.d. starter with supply and fitting of contacter set ( mnx95 1no and mnx50 1no. ) l&t make or equivalent capacity of isi marked reputed make, over load relay 1no., timer 1no., spp 1no. etc all complete work each for 3 nos. fasd starter, dressing and doing fresh electric connection with new wire and connector inside panel, rechecking of all connections and testing on full load. ( rate after deducting the cost of scrap materials ) . for mcp no. 1. 4.10 cost towards overhauling of motor control panel cum 2 nos. of f.a.s.d. starter panel with all labour tool, tackles and technician charges for disconnecting the electric line & opening of electric wire connection inside panel. cleaning, checking, rectifying of faults of 2nos. f.a.s.d. starter with supply and fitting of contacter set ( mnx70 1no and mnx50 1no. ) l&t make or equivalent capacity of isi marked reputed make, over load relay 1no., timer 1no., spp 1no. etc all complete work each for 2 nos. fasd starter, dressing and doing fresh electric connection with new wire and connector inside panel, rechecking of all connections and testing on full load. ( rate after deducting the cost of scrap materials ) . for mcp no. 2. 4.11 cost towards supplying and fitting of 40w led flood light, with bracket, copper wire, on off switch etc with all accessories including all labour tools , tackles and technician charges., with cp & ohc, ( rate after deducting the scrap materials. ) . make havells / syska / mescab / polycab / phillips 4.12 providing chipping work on the roof surface of clear water pump house, removing of all garbage to outside with lead of 50 m , providing and cleaning of concrete surface to remove dust and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. pounding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. on identification of seepage, cement grouting to be done with non shrink expanding admixture of sika lndia pvt.ltd. / myk schomberg / dr fixit / fosroc or equivalent. 4.13 cost towards providing pcc m 200 in nominal mix of 1:1.5:3 on roof with approved quality of stone chips 12mm to 6mm size graded and clean course sand of fm 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of e / i. 4.14 providing 12 mm thick water proof cement plaster ( 1:3 ) with clean coarse sand of f m. 1.5 with integral water proofing compound liquid @125 ml per bag cement including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of e / i. brand fosroc conplast x421 lc, sika plastocrate plus, dr fixit pidiproof lw+, myk proof wp 10 or equivalent. 4.15 dismantling old plaster and pointing in cement or lime and taking out joints to 15mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of e / i. inside and outside of pump house, 4.16 providing 6mm thick cement plaster ( 1:4 ) in ceiling and wall of building with clean coarse sand of f.m. 15 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of e / i. 4.17 providing two coats of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls , scaffolding, curing and taxes all complete as per building specification and direction of e / i. 4.18 providing 2 ( two ) coats of synthetic enamel paint of approved shade & make over steel surface including cleaning the surface, removing dirt, scales, smokes, grease, scaffolding & taxes all complete as per building specification and direction of e / i. for door, window, common header pipe, valves etc....

Drinking Water And Sanitation Department - Jharkhand

31897243 e quotation for seeking firm rates for non schedule items for preparing estimates. gr c repairing of electro mechanical assets and all their associate works like repairing of motors, pumps, starters, panel, cables etc. at rinpas, kanke, ranchi , c / f pump sets , cost towards dismantling of 100 hp wpil make single stage c / f pump and taking out its rotating unit assembly with changing of damaged parts by new making s / f neck ring as per sample size 2 nos, c.i shaft sleeve as per sample size – 2nos, making s / f shaft sleeve check nut as per sample size – 2 nos , s / fball bearing skf 6309 2 nos and repairing of bearinghousing by welding turning machining as per bearing size 2 nos, c.i gland tightner as per sample size – 2nos including cost of reassembling of rotating unit assembly balancing rotating unit assembly and fitting the pump with supply of grease gland packing oil packing paper with transporting cost of rotating unit from p / plant to workshop and back , cost toward supplying fitting & changing of 100 hp jyoti make motor ball bearing skf 6316 at de side 1 no. and sk 6314 nde 1 no. with grease. , cost towards repairing of 100 hp l & t make f.a.s.d starter with s / f contactor set 2 sets ) , relay unit ( 85 135a ) 1set, timer unit 1 set, making new connection etc all complete. , supplying and fitting 6”dia tyre coupling complete set with nut bolt washer and tyre of reputed make for 100 hp pump set. , cost towards supplying and fitting mccb 630 amp. for bus bar make l&t schneider / bch , cost towards supplying and fitting mccb 250 amp. for bus bar make l&t schneider / bch , cost toward supplying fitting & changing 100mm dia cidf sluice valve ( pn 1 ) 1 set & cidf nr valve ( pn 1 ) 1 no. including fitting charge , cost toward supplying fitting & changing 150 mm dia ci foot valve hiding single leather flat and gun metal seating all complete. , cost towards providing all labours tools & techniciansfor dismantling and disconnecting of 40 hp kirloskar make motor and taken out rotor from motor stator cutting removing burnt and damaged coil and after repairing refitting the same etc all complete. , cost towards full rewinding of 40 hp motor stator with supplying of super enameled round copper conductor suitable gauge class f insulating materials making all connection taping, varnishing with dr beck varnish all complete with deducting the cost of taken out scrap materials ( wt. of wire is 18.5kg approx ) . , s / f ball bearing skf make 6312&6309 at de&nde side of 40 hp kirloskar make motor including proper greasing all complete. , cost towards providing all labour tools and tackles for dismantling of 40 hp single stage kirloskar make c / f pump with changing damaged parts such as gm neck ring as per size and sample 2 nos. shaft sleeve 2 nos. shaft sleeve check nut 2 nos. making ci bearing housing as per size and sample 2 nos. supplying and fitting ball wearing skf make 6309 2nos. making supplying and fitting ms gland tightner as per size and sample 2 pair making citric motion of rotating unit assembling on lathe m / c etc all complete , cost towards repairing of 40 hp l&t motor starter by supplying and fitting l&t make 3 core ml 4 power contactor 45 amp. with auxiliary contractor complete set 2nos. supplying and fitting timer type lt 100 1nos., over load relay suitable range 1nos.etc all complete. , cost towards providing all labours tools & technicians for taking out damaged 250amp. tpn hrc fuse type disconnector main switch replacing new disconnector fuse unit with hrc fuse 1 set doing electrical connection and testing on full load after deducting the cost of taken out scrap materials , supplying and fitting 6”dia tyre coupling complete set with nut bolt washer and tyre of reputed make for 40 hp pump set. , cost towards providing all labour tools and tackles for dismantling and taken out damaged nr valve and s / f 4”dia c.i df nr valve heavy duty rating pn 1 isi marked on delivery pipe line with all work including cost of labour charge all complete testing on full load with deducting the cost of scrap materials. , cost towards supplying and laying 50 mm² x 3.5 core aluminium armoured cable from main switch to industrial panel. ( both sets ) . , cost towards supplying and laying 16 mm² x 3 core copper cable from panel to starter and starter to motor in bunch of two. ( both sets ) . , cost towards replacing damaged suction pipe by making supply & fitting 100 mm dia heavy duty m.s. suction pipe 10feet long both and 100 mm dia m.s. flange welding, 100mm dia long bend 1 no with nut bolt rubber insertion etc required for the job. , transportation charge of above p / set from work site to work shop and vice versa including loading and unloading charge. , submersible pump sets , cost towards providing all labour tools and technicians for dismantling and taken out 5hp submersible p / set with column pipe for bore well. , cost towards for rewinding and repairing of5 hp submersible motor with s / f 1.2 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrape materials. , cost towards repairing of5 hp submersible pump with s / f norylimpeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i. suction casing, c.i nrv etc. all complete ( 23 stage ) after the deduction of cost of scrape materials. , cost towards s / f and changing of 2”dia upvc column pipe with heavy duty socket ( make supreme / paras ) for both sets. , cost towards replacement of damaged submersible cable by supplying and fitting 4 mm2x 3 core flat submersible cable including cable jointing all complete. after the deduction of cost of scrape materials. dwsd m1062 , providing all labour, tools tackles& technicians for lowering of 5hp submersible pump set with all accessories in the bore well , cost towards supplying and fitting ( 1 ) 50 mm dia g.m. full way valve – 1 no ( 2 ) 40 mm dia nr valve – 1 no ( 3 ) 40 mm dia g.i. bend ( 4 ) 2” dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrape materials. , supplying and installation suitable size panel board for 5 hp submersible pump including fixing on wall comprising of following points such as ( 1 ) d.o.l starter 1no. ( 2 ) hrc fuse – 3 no. ( 3 ) voltmeter with selector switch – 1 set ( 4 ) ammeter with selector switch – 1 set ( 5 ) phase indicating neon lamp – 3 nos. etc. all complete after the deduction of cost of scrap materials. , supplying all material such as 40 mm dia g.i. pipe medium quality 15 ft. long, charcoal salt etc. for making earthing station as per i.e. rule , supplying and laying ground and on wall 10 swg, g.i. wire for doing continuous earthing for all electrical equipments , cost towards replacement of old and damaged underground service line by supplying new overhead line 10 mm² 3core copper wire after the deduction of cost of scrap materials. , supplying and laying ( under and over ground ) 2 dia aqua gold weather proof pvc pipe from bore well to main rising pipe line ( damaged pipe replacement ) make supreme / isi mark ( both sets ) , supplying and laying 1.5 dia under and over ground supreme aqua gold / any reputed make weather proof upvc pipe from bore well to dharamshala over head tank. , supplying and fitting union 1.5 dia , supplying and fitting elbow 1.5 dia , supplying and fittingtee 1.5 dia , supplying and fitting socket 1.5 dia , supplying and fitting upvc valve 1.5 dia , transportation charge of above p / set from work site to work shop and vice versa including loading and unloading charge....

Drinking Water And Sanitation Department - Jharkhand

31897240 e quotation for seeking firm rates for non schedule items for preparing estimates. repair and replacement of plumbing fixtures, cleaning of toilet and bathroom of inter ward, icu ward, staff room, female ward, w.w. ward, d.b. ward, duty room, main office building, a. ward, opd, drug store etc. and repairing of submersible pump set, , 10 hp c / f pump set , cost for complete rewinding of 10 h.p sq. cage induction motor operated on 415v, 3 phase, 50 c / s 1460 rpm with supply fitting of super enameled copper wire and other required insulation materials, heating assembly of the motor and testing on load ( wt of burnt coil 5.5 kg ) , cost for dismantling of 10 h.p c / f pump checking and changing of its damaged parts such as pump shaft of en 9 materials 01 no. key 02 nos. gland tightner 2 sets, gland tightner stud 4 nos. c.i bearing housing with cap 2 sets, ball bearing 6306 ( skf ) 2 nos. casing stud 16 mm sq. x 80 mm long with nut 8 nos. packing paper. grease, gland packing etc all complete and testing on load. , cost for supply and fitting of 3 dia tyre coupling complete set with nut, bolt & tyre. all complete. , cost for supply and fitting of 4 dia g.m flap tyre foot valve with packing and nut & bolt 4 nos. etc all complete. , cost for supply and fitting of 3 dia cidf heavy duty sluice valve, isi marked , cost for overhauling and repairing of motor control panel and changing of its damaged parts such as contactor ( ml 4 ) 3 nos., vm 02 nos., am 01, selector switch 2 nos, 100 amp mccb – 1 no, etc all complete and testing on load. , 3 h.p. submersible p / set , providing all labour, tools, tackles and technicians for taking out 3 h.p. submersible pump set with column pipe for bore well , cost towards for rewinding and repairing of 3 h.p submersible motor with s / f suitable winding wire, bronze bush etc. all complete after the deduction of cost of scrape materials. , cost towards repairing of 3 h.p. submersible pump with s / f bronze impeller as per size and sample, bush, thrust plate, pump shaft etc. all complete after the deduction of cost of scrape materials. , cost towards replacement of damaged submersible cable by supplying and fitting 2.5 mm2x 3 core flat submersible cable including cable jointing all complete for both set. jsor cb 1 3 after the deduction of cost of scrape materials. , cost towards supplying fitting, changing 2” dia g.i. column pipe with heavy duty socket ( make zindal / tata ) jsor 9k vi after the deduction of cost of scrape materials. , cost towards supplying and fitting ( 1 ) 2 dia g.m. full way valve – 1 no ( 2 ) 2 dia nr valve – 1 no ( 3 ) 2 dia g.i. bend 2 nos. ( 4 ) 2” dia m.s. clamp with nut bolt 2 pair after the deduction of cost of scrape materials. , providing all labour, tools tackles and technicians for lowering of 3 h.p submersible pump set with all accessories in the bore well , providing all labour, tools tackles and technicians for lowering 3 h.p.submersible pump set with all accessories in the bore well , 5 h.p. / 7.5 h.p. submersible p / set , providing all labour, tools, tackles and technicians for taking out 5 h.p. submersible pump set with column pipe ( 280 ) from bore well , cost towards for rewinding and repairing of5 hp submersible motor with s / f 1.0 swg round copper winding wire 24 slot, gun metal bush, thrust plate, thrust bearing, diapharm, oil seal, etc with lathe work. all complete. after the deduction of cost of scrape materials. , cost towards repairing of 5 hp submersible pump with s / f noryl impeller as per size and sample, diffuser, s.s. shaft, s.s. coupling, s.s. sleeve, nut, c.i nrv etc. all complete ( 23 stage ) after the deduction of cost of scrape materials. , cost towards replacement of damaged submersible cable by supplying and fitting 4 mm2x 3 core flat submersible cable including cable jointing all complete. after the deduction of cost of scrape materials. , cost towards supplying fitting, changing 2” dia g.i. column pipe with heavy duty socket ( make zindal / tata ) after the deduction of cost of scrape materials. , cost towards supplying and fitting ( 1 ) 50 mm dia g.m. full way valve – 2 no ( 2 ) 50 mm dia nr valve – 1 no ( 3 ) 50 mm dia g.i. bend ( 4 ) 2” dia m.s. clamp with nut bolt – 2 pair after the deduction of cost of scrape materials. , supplying and laying ground and on wall 10 swg, g.i. wire for doing continuous earthing for all electrical equipments , providing all labour, tools tackles and technicians for lowering ( 280 ) of 5 h.p.submersible pump set with all accessories in the bore well , supplying and installation suitable size panel board for 5 h.p. submersible pump including fixing on wall comparising of following points such as ( 1 ) d.o.l starter – 1 no. ( 2 ) hrc fuse – 3 no. ( 3 ) volt meter with selector witch 1 set ( 4 ) ammeter with selection switch – 1 set ( 5 ) zindicating neon lamp – 3 no. etc. all complete after the deduction of cost of scrape materials. , supplying of plumber & sweeper for engaged to maintenance of water supply, cleaning of toilet and bathroom, sewer line etc. operating of pump, f.w.v fro interrupted water supply etc. all complete as per direction of e / i. ( including contractor profit ) . period from 01.04.2022 to 31.03.2023 ( i ) ( plumber ) 12 month x 26 days x 1 nos. = 312 nos. , ( ii ) sweeper 12 month x 26 days x 1 nos. = 312 nos. , provision leake repairing of different and size of upvc sch 80 pipe in place of existing / cracked and damaged pipe of isi approved make or equivalent make damaged pipe in trenchage and replacement of pipe and fitting so as to give. i m average cover over the socket of pipes with disposal of excavated earth within initial lead and lift and necessary fitting and earth work in backfilling and cutting pipe to size etc. all complete as per specification and direction of e / i. leakage in 50 mm dia upvc pipe , leakage in 40 mm dia upvc pipe , leakage in 32 mm dia upvc pipe , leakage in 25 mm dia upvc pipe , leakage in 20 mm dia upvc pipe , provision leake repairing of different and size of upvc sch 80 pipe in place of existing / cracked and damaged pipe with red lead and yarn of following nominal bore screwed and socketed joints on wall, ceiling and floor including supplying and fitting on wall hooks or pipe clamp wooden plugs, cutting pipe to size and threading ends where necessary etc. all complete as per specification and direction of e / i. leakage in 50 mm dia upvc pipe , leakage in 40 mm dia upvc pipe , leakage in 32 mm dia upvc pipe , leakage in 25 mm dia upvc pipe , leakage in 20 mm dia upvc pipe , supplying and flaxing u pvc ball valve of approved make all complete as per direction of e / i. 50 mm dia u pvc ball valve , 40 mm dia u pvc ball valve , 32 mm dia u pvc ball valve , 25 mm dia u pvc ball valve , 20 mm dia u pvc ball valve , supplying of material for consumption to day to day works direction of e / i. ( a ) hydrochloric acid ( 500 ml ) , ( b ) bleaching powder ( 25 kg bag ) , ( c ) phenyl liquid ( 1 ltr. ) , ( d ) harpic liquid ( 1 ltr. ) , ( e ) surf ( 1 kg ) , ( f ) nariyal broom , ( g ) pochha broom , ( h ) safi , ( i ) dettol ( 500ml ) , ( j ) phenyl goli ( pkt ) , ( k ) odonil , ( l ) room freshner , ( m ) phooll broom , ( n ) lizol ( 500 ml ) , ( o ) plastic bucket ( 10 l ) , ( p ) plastic mug ( 1 l ) , supplying of materials for c.p. bathroom fitting ( as per schedule rate ) to consumrtion day to day work. 15mm dia c.p. bib cock ( long thread ) , 15mm dia c.p. pillar cock ( long thread ) , 15mm dia c.p. angular stop cock ( long thread ) , 15mm dia cp basin mixture , 15mm dia cp wall mixture , jet sprey , health faucet , bib cock spindle , a ) medium size , b ) large size , mirror , towel rail , soap dish , 32mm dia cp waste : , 32mm dia pvc waste pipe 750mm long with coupling : , 100mm dia c.p. jali : , 15mm dia and 45cm long pvc connection pipe : , sink waste , cistern ball cock , cistern handle , pvc water storage tank cover ( 2000 / 1000 l ) , 25mm dia ball cock set for pvc tank , cammod cover , m seal , waste pipe bundla , 10 lit pvc l / d cistern , flush bend , basin , supplying all materials, labours, tools and equipment for the fitting and fixing cp bathroom fittings in vip fittings including all accessories etc. all complete as per specification and direction of e / i. a ) sink mixture flr5309n jaquar , b ) wall mixture 3 in 1 with wall flange flr5281n jaquar , c ) central hole basin mixture with popup waste system 450mm long braided houses ( con 169knb ) jaquar , d ) pillar cock flr5011n jaquar , e ) bib cock with flange flr – 5053n jaquar , f ) cp bib cock 2 in 1 angular stop cock flr 5041n jaquar , g ) angular stop cock with flange flr 5053n jaquar , h ) health faucet ald 577 jaquar , i ) over head shower with arm ohs 1999 jaquar , j ) glass shelf 22 ( aqn 7771 ) jaquar , k ) towel rail ( akp 35711ps ) jaquar , l ) towel ring ( akp 35721p ) jaquar , m ) soap dish holder akp 35731p jaquar , n ) cp liquid soap dispenser with mettalic bottle acn1137n jaquar , supplying, fitting and fixing pvc pipes of approved make including supplying nails, clips and pvc washer cement & yarn for making plumber joints properly cutting pipe to sizes including earth work of scaffolding etc. where necessary etc. all complete as per specification and direction of e / i. 100mm dia pvc sewer pipe , 75mm dia pvc sewer pipe , supplying and fixing pvc fitting of approved make confirming to isi including supplying nails and bobbins from making solvent cement solution or gasket joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of e / i. 110mm swr nahani trap , 110mm swr plain bend , 110mm swr door bend , 110mm swr plain tee , 110mm swr door tee , 75mm swr plain bend , 75mm swr door bend , 75mm swr plain tee , 75mm swr door tee , providing all material, equipment and wash out and cleaning of 2000 / 1000 litre pvc water storage tank including rubbing the wall of tank by the help of coconut, rushi and bleaching powder their washing by clean water all complete as per direction of e / i. 3000 litre capacity hdpe w / s / tank 2 time x 3000 liter x 2 nos. = 12000.00 liter 2000 litre capacity hdpe w / s / tank 2 time x 2000 liter x 88 nos. = 372000.00 liter 1000 litre capacity hdpe w / s / tank 2 time x 1000 liter x 9 nos. = 18000.00 liter total = 402000.00 liter...