Drinking Water And Sanitation Department - Jharkhand

32639547 request for proposal from uv visible double beam spectrophotometer manufacturers for supplying ultra pure double beam ( uv visible wave length range ) spectrophotometer with one year guarantee and five years comprehensive maintenance contract for 24 request for proposal from uv visible double beam spectrophotometer manufacturers for supplying ultra pure double beam ( uv visible wave length range ) spectrophotometer with one year guarantee and five years comprehensive maintenance contract for 24 , technical specification of double beam ( uv visible wavelength range ) spectrophotometer optical system double beam ( uv visible wavelength range ) , diffraction grating minimum 1200 lines / mm , photometric details range must cover from 0.3 to +3, accuracy must cover minimum range=±0.002 absorbanceat 1 absorbance, stray light < 0.05 %t@220, 340 ( must cover less than 370nm ) , baseline flatness must cover± 0.006a, detector photodiodes / single photodiodes / dual silicon photodiodes, power 240v± 10%, 50 / 60hz, light source xenon flash lamp , wavelength details range must cover 190nm to 1100nm, accuracy must cover ±0.2nm, repeatability must cover±0.005nm, resolution below or upto 0.1, bandwidth must cover 1.0 nm, measuring modes absorbance, transmittance ( % ) , concentration, operating modes single wavelength, multiplewavelength, time scan, data presentation display of analysis results & graphic data on the screen, pc link software, port for data transfer, upplier should provide service for installation, demonstration, training for all operation procedure, temperature range operating conditionsshould cover +10 degree c to 40 degreec, analytical quality assurance instrument should have internal analytical quality assurance system with additional options for customizing the analytical quality assurance tools, certification must comply ce certification , accessories : quartz cuvettes 50mm length , 10mm , 20 mm path length / width, cuboidal ( each 2 pairs ) glass cuvettes 50mm length, 20 mm, 10mm path length / width, cuboidal ( each 4 pairs ) , cuvette holder for holding 50mm rectangular cuvettes ( 2 nos. ) , personal computer must be an iso certified and branded and should be suitable for assembling quoted spectrophotometer display size 50 60.45cm, windows original windows 10, compatible to support software to run uv visible spectrophotometer, memory minimum 4gb, processor i3 / i5 processor, graphics integrated graphics, hard drive 1tb ( 1 terabyte ) computer accessories mouse, key board, central processing unit ( cpu ) , other accessories ups and battery 2 kva online ups 192 v with inbuilt isolation transformer, battery 65ah 12v should be an iso certified and compatible for using quoted spectrophotometer , comprehensive maitenance contract ( for s.n.1&2 ) ...

Jharkhand State Building Construction Corporation Limited - Jharkhand

32287667 niq for minority residential niq for minority residential school margo munda, deoghar , phartiha, garhwa district. barhate, sahebganj district name of work : .(3.) construction of school with residential building for minority community at margo munda, deoghar district.(4.) construction of school with residential building for minority community at phartiha, garhwa district.(6)proposed construction of residential school for minority group at barhate, sahibganj, jharkhand mr fabrication, supplying, installation, testing & commissioning of electrical control panel of cubical construction, wall mounted type, fabricated out of 2mm. thick crca sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection, and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 v, 3 phase 50 hz ac supply with enclosure protection class ip 42. for terrace pump mr fabrication, supplying, installation, testing & commissioning of electrical control panel of cubical construction, wall mounted type, fabricated out of 2mm. thick crca sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection, and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 v, 3 phase 50 hz ac supply with enclosure protection class ip 42. for terrace pump mr supplying fitting fixing pressure gauge assemble with gate/ball valve all complete with labor and material as per engineer in charge. mr supplying fitting fixing air release valve / drain valve all complete with labor and material as per engineer in charge. mr supplying fitting fixing ms structure support for piping all complete with labor and material as per engineer in charge. mr supplying and fixing of hose cabinet of size 450mm x 450mm x 250mm made of 2mm thick m.s. sheet with 6mm thick glazed glass door including necessary locking arrangment suitable to accomodate 1 nos. 15 mtr. long hose pipe, 1 no. branch pipe mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect. mr providing , fixing dry chemical powder (stored pressure type) mono ammonium phosphate 50% powder confirming to ‘is 14609’ , nitrogen pressurized, controllable discharge mechanism, pressure gauge, discharge hose & nozzle epoxy polyester powder coated as per ‘is 15683’ isi mark fire extinguishers. operating temperature: ( ) 20oc to (+) 55oc suitable for ‘a’ ‘b’ ‘c’ class of fire complete in all respects (4 kg capacity) mr stainless steel text (text height 250 mm ) at pergola slab with grouting all complete including matrial & labour as pet e/i mr carbon di oxide type , gas confirming to is ‘15222’ , cylinder confirming to ‘is 7285’ & peso approved ,controllable discharge mechanism, discharge hose & horn as per ‘is 15683’ & ‘is 2878’ isi mark fire extinguishers (wheel type or squeeze grip type). operating temperature : ( )20oc to (+)55oc suitable for ‘b’ ‘c’ class of fire (4.5 kg capacity) mr providing , fixing modular type fire extinguishers for electrical rooms (stored pressure type) mono ammonium phosphate 50% powder confirming to ‘is 14609’ , nitrogen pressurized, controllable discharge mechanism, pressure gauge, discharge hose & nozzle epoxy polyester powder coated as per ‘is 15683’ isi mark fire extinguishers. operating temperature: ( ) 10oc to (+) 55oc suitable for ‘a’ ‘b’ ‘c’ class of fire complete in all respects (5 kg capacity) mr providing and fixing 25 mm nominal gun metal gate valve class i with ci wheel of approved quality with union (screwed end) mr main lt panel for main building : supplying, designing, manufacturing, installation, testing and commissioning of lt panel of 14 swg crca sheet (2 mm) steel , dust and vermin proof with reinforcement of suitable size iron channel , with proper lifting arrangement effecting proper connection of all incomers and outgoing(ip 43) fully compartmentalized cubical type, floor mounted , totally enclosed, extendable on both sides, switch board and suitable for operation on 415v, 50hz, 3 ph. ac supply and fault level 50 ka with front operated construction including separate fabrication arrangement for fixing mccbs and bus coupler. the sheet steel under go minimum 7 tanks treatment followed by finishing powder coating of minimum 60 micron thickness duly compartmentalized having accessories mounted inside the cubical panel, earthing with 2 nos. earth studs.the panel includes 415v, 200a, 3ph, 50ka, 50hz electrolytic aluminium bus bar (e91ewp) aluminium, earth bus for main supply, removable glands plates, cable glands and sending and receiving ends, including connection with outgoing feeders complete in all respects. all inter connections shall be made with 2.5 4, 6, 10 sq mm pvc cu. wire. main lt panel for main building : supplying, designing, manufacturing, installation, testing and commissioning of lt panel of 14 swg crca sheet (2 mm) steel , dust and vermin proof with reinforcement of suitable size iron channel , with proper lifting arrangement effecting proper connection of all incomers and outgoing(ip 43) fully compartmentalized cubical type, floor mounted , totally enclosed, extendable on both sides, switch board and suitable for operation on 415v, 50hz, 3 ph. ac supply and fault level 50 ka with front operated construction including separate fabrication arrangement for fixing mccbs and bus coupler. the sheet steel under go minimum 7 tanks treatment followed by finishing powder coating of minimum 60 micron thickness duly compartmentalized having accessories mounted inside the cubical panel, earthing with 2 nos. earth studs. the panel includes 415v, 200a, 3ph, 50ka, 50hz electrolytic aluminium bus bar (e91ewp) aluminium, earth bus for main supply, removable glands plates, cable glands and sending and receiving ends, including connection with outgoing feeders complete in all respects. all inter connections shall be made with 2.5 4, 6, 10 sq mm pvc cu. wire.all incomer mccb and bus coupler shall be mechanically operated . all 4 pole mccb with thermomagnetic based release must have following character: icu=100% ics with adjustable s/c and o/lprovision for inbuilt earth leakage module & provision for inbuilt measuring unit. the panel consisting of the followings, 4 pole mccb 160 a, 35 ka with fixed thermal magnetic setting 1 no, provision of mechnical interlocking between 125a/fp/25ka mccb as common incoming and 1 no. of 125a on load change over for d.g incomer, in such a way so that the two supplies are not parallel at any time.1 no. 125a tpn on load change over panel mounted open execution type and suitable bus arrangement for cable termination. make l&t/sucomo. 1 no. 125a/fp/16ka/ mccb thermomagnetic release type, and s/c, o/l protection, with rotary handle & spreader links. mcb tpn 40a 10 nos, mcb dp 40a 2nos( oter light+spare), mcb dp 63a 6 nos( pdb+ups+spare),electronic on timer delay 30 sec, 200 amp 415 v heavy duty three phase with neutral busbar chamber, indicator switch 3 nos, selector switch, analog voltmeter 3 nos, analog ameter, c.t. coil mr main lt panel for hostel building : supplying, designing, manufacturing, installation, testing and commissioning of lt panel of 14 swg crca sheet (2 mm) steel , dust and vermin proof with reinforcement of suitable size iron channel , with proper lifting arrangement effecting proper connection of all incomers and outgoing(ip 43) fully compartmentalized cubical type, floor mounted , totally enclosed, extendable on both sides, switch board and suitable for operation on 415v, 50hz, 3 ph. ac supply and fault level 50 ka with front operated construction including separate fabrication arrangement for fixing mccbs and bus coupler. the sheet steel under go minimum 7 tanks treatment followed by finishing powder coating of minimum 60 micron thickness duly compartmentalized having accessories mounted inside the cubical panel, earthing with 2 nos. earth studs. the panel includes 415v, 200a, 3ph, 50ka, 50hz electrolytic aluminium bus bar (e91ewp) aluminium, earth bus for main supply, removable glands plates, cable glands and sending and receiving ends, including connection with outgoing feeders complete in all respects. all inter connections shall be made with 2.5 4, 6, 10 sq mm pvc cu. wire.all incomer mccb and bus coupler shall be mechanically operated . all 4 pole mccb with thermomagnetic based release must have following character: icu=100% ics with adjustable s/c and o/lprovision for inbuilt earth leakage module & provision for inbuilt measuring unit. the panel consisting of the followings 4 pole mccb 160 a, 35 ka with fixed thermal magnetic setting 1 no 1 no. 125a tpn on load change over panel mounted open execution type and suitable bus arrangement for cable termination. make l&t/sucomo. 1 no. 125a/fp/16ka/ mccb thermomagnetic release type, and s/c, o/l protection, with rotary handle & spreader links. mcb tpn 40a 10 nos, mcb dp 40a 6nos( outer light+spare) , mcb dp 63a 4 nos( ups+spare), electronic on timer delay 30 sec , 200 amp 415 v heavy duty three phase with neutral busbar chamber , indicator switch 3 nos , selector switch, analog voltmeter 3 nos, analog ameter, c.t coil mr sitc of 24x ports 10/100/1000base t ports,4x 1g sfp ports, supports poe standards ieee 802.3af, 802.3at,1x usb c console port,1x usb,up to 370 w of class 4 poe power, fanless design, with dual core arm cortex a9 @ 1016 mhz cpu, memory 4 gb ddr3 16 gb emmc , packet buffer size of 12.38mb (4.5mb ingress/7.875mb egress),ipv6 ready certified mac address table size: 16000 entries;average latency 1 gbps latency: < 1.5 µs (lifo 64 byte packets), throughput: up to 41.6 mpps (64 byte packets), switching capacity: 56 gbps, operating temperature 32°f to 113°f (0°c to 45°c) up to 5000 ft (1.5 km), certifications ul,en,fcci, preferred make hp/aruba/allied telesis/cisco/netgear or as approved by e/i mr sitc of 12x ports 10/100/1000base t ports,2x 1g sfp ports,2x 1gbe ports , supports poe standards ieee 802.3af, 802.3at,1x usb c console port,1x usb,up to 139w of class 4 poe power, fanless design,with dual core arm cortex a9 @ 1016 mhz cpu, memory 4 gb ddr3 16 gb emmc , packet buffer size of 12.38mb (4.5mb ingress/7.875mb egress),ipv6 ready certified mac address table size: 16000 entries;average latency 1 gbps latency: < 1.5 µs (lifo 64 byte packets), throughput: up to 23.8 mpps (64 byte packets), switching capacity: 32 gbps, operating temperature 32°f to 113°f (0°c to 45°c) up to 5000 ft (1.5 km), certifications ul,en,fcci, preferred make hp/aruba/allied telesis/cisco/netgear or as approved by e/i mr sitc of 24 port utp jack panel (24 port rj 45 loaded cat 6 utp 19 rackmountable patch panel preferbaly with 6 blocks). (make:legrand/panduit/rit/siemon) detailed specs for 19 1u 24 port unsheilded, patch panel patch panel should be modular design, populates up to 24 utp keystone type jacks in 1u, patch panel should be enhanced with cable strain relief with retention tray; it should be single metal both front panel and rear tray, material: sub rack made of ms steel with dimension 44.4 mm : 482.6 mm : 105 mm (h:w:d) tray, information outlet or connectin module should comply with the specification mentioned above in 2, standard : conforms to iec 60603 7 (603 7) for keystone type, snap on apertures, should be rohs complied mr sitc of straight lan patch chord 1 mtr (make:legrand/panduit/rit/siemon) ,detailed specs for patch cord, u/utp 4p, cat.6, length  1/3 metre, standardization: compliant with cat.6, class e requirements: iso/iec 11801 2nd edition compliant with cat.6 component standards iec 60603 7 4 and 60603 7 5 , cable shield:  u/utp, number of conductors : 8 , stranding: 7 x 0.20 mm (24 awg), cable jacket characteristics: cable, metal free cable overall diameter: 6.5±0.2 mm, tube / wire type: stranded conductor, insulation: solid polyolefin, 0.97±0.02 mm diameter ,plug: feature cable retension, with enhanced pull strength., cat 6 patch cord plug to have round cable holder and strain relief boot to avoid bending. jacket: pvc with 8 different color options,plug should have high repeatability cross talk performance mr sitc of fully loaded 9u 19 600*500 wall mounted rack with all required accessories 2 nos. of fan,6a 6 plug pdu 1 nos. ,cable manager 2 nos., mounting screws 20 pcs ; preffered make legrand/apw/president/valrack/netrack mr sitc of epabx system: ip based 100% non blocking epabx system should be a ip compatible with rich feature set of the system and can be connected with pure voice over ip (voip) communication network across corporate local and wide area networks (lan and wan) as & when required. central processing unit: the system main software should be open architecture based. the cpu of main system shall be 32 bit processor working at 2.0 ghz or better. the system should be wall mountable. • system architecture should be latest pure ip and should be wall mountable; meet me conference 30 party x 2 from day 1 must be available. must support unified communications equipped with 16 analog extensions expandable upto 48 extensions,4 analog trunk ports,epabx make: avaya/nec/unify mr analog basic push button telephone: sitc of analog telephone make: panasonic/ bpl/beetel mr sitc of telephone tag block): ip 65( weather proof). preffered make krone 50 pair krone box fully loaded without ipm mr supply, fitting, fixing, commissioning and testing of 16 sq. mm copper conductor multi strand pvc sheilded frls wire with suitable copper lugs for battery interconnection and suitable 16 sq. mm copper wire of 2 length of 10 mtrs each for ups to battery excluding cable from panel to ups and ups to panel. make polycab/havells/kei mr chemical earthing: supply, errection, fitting, fixing, commissioning and testing along with earth cutting, digging, earth refilling for chemical earthing of the building except g.i. strips (25mmx5mm) each earth pit has to be tested with earth tester 1000 v/1000 ohms & the test report has to be submitted by the contractor to the department after certification of the same by the consultant. the above chemical earthing includes the provision of masonary enclosure and hdpe earth pit cover 300mm x 300 mm (under floor earth inspection pit) having locking arrangement as earth chamber.the above chemical earthing includes the following items (3 mtr earthing) ; each chemical earthing shall have following details: supply of pollution free earthcon compound 4 bags of 25 kg each ; supply of 17.2 mm dia, 250 micron,molecularly bounded copper coated 3 mtr long electrode. tested as per iec 62561 2. meets the requirement of is 3043 & iec 60364 5 54. tested for short circuit withstanding capacity. high tensile strength. (ul listed).; supply of stainless steel u bolt clamp; supply of hdpe earth pit cover for earth chamber (capacity of 5 ton) ; sub total c( ups system & accessories) mr sitc of 5mp fixed lens network bullet camera with following technical specifications; preffered make: honeywell/bosch/hikvision/pelco/sony image sensor : 1/2.7 progressive scan cmos, min. illumination : color: 0.003 lux @ (f1.4, agc on), b/w: 0 lux with ir preferred recording resolution: 5mp (2592x1944) or better ,day & night: ir cut filter , shutter speed: 1/3 s to 1/100,000 s, digital noise reduction; 3d dnr ,wdr: 120db true wdr or better, lens; 4mm , ir range : 40m ir or higher ,streaming type: should support quad video streams or better ,video compression: h.265,h.264, h.264+,h.265+,mjpeg and main stream supports h.264+/h.265 , audio compression: g.711ulaw/g.711alaw/g.722.1/g.726/mp2l2/pcm/mp3 , image enhancement: blc, hlc, 3d dnr, eis, defog,roi , (5 fixed regions for main stream and sub stream). image settings: rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser , day/night switch: day, night, auto, schedule , network protocol : tcp/ip, icmp, http, https, ftp, dhcp, dns, ddns, rtp, rtsp, ntp, upnp, smtp, igmp, 802.1x, qos, ipv4, ipv6, udp, bonjour, ssl/tls, pppoe, arp, snmp,open network video interface (profile s, profile g, profile t),isapi. simultaneous live view: 6 channeluser host: 32 users. 3 user levels: administrator, operator and usersecurity: password protection, complicated password, https encryption, ip address filter, security audit log, basic and digest authentication for http/https, tls 1.2, wsse and digest authentication for open network video interface, memory card encryption.edge base recording storage: built in memory card slot, support microsd card, up to 256 gb ,preferable analytics features: motion detection, video tampering alarm, line crossing detection, intrusion detection,scene change detection, video quality diagnosis.event alarm: notify surveillance center, trigger recording, trigger capture, send email, audible warning,network disconnected, illegal login.ethernet port: 1 x rj45 10m/100m ethernet port, audio interface; 1x input, 1x output , power supply: dc12v, poe (802.3af) , operating conditions: 30° c ~ + 60° c ingress protection: ip67 , certifications: ce, fcc, ul,bis. mr sitc of 32 channel nvr processor : dual core embedded processor, operating system : pre loaded licensed os,ip camera support up to 32 ch , should support h.265+/h.265/h.264+/h.264 video formats, up to 2 ch @ 8mp or 4 ch @ 4mp or 8 ch @ 1080p decoding capacity,1 hdmi and 1 vga interfaces: both interfaces support independent video output,4 hdds for continuous video recording, up to 256 mbps incoming bandwidth, outgoing bandwidth 160 mbps, audio output 1 ch, rca (2.0 vp p, 1 kω, using the audio input ),two way audio 1 ch, rca (2.0 vp p, 1 kω, using the audio input ),video output mode hdmi/vga independent output, recording resolution 12 mp/8 mp/6 mp/5 mp/4 mp/3 mp/1080p/uxga/ 720p/vga/4cif/dcif/2cif/cif/qcif,sata 4 sata interfaces of capacity up to 10tb capacity for each hdd, serial interface 2 rs 485 (half duplex), 1 rs 232, usb interface front panel: 2 × usb 2.0; rear panel: 1 × usb 3.0, smart phone connectivity through app or browser : iphone, ipad, android, windows phone, should support multiple vca (video content analytics) events, configurable special camera smart functions, such as vca detection (motion, line crossing, intrusion, etc.), heat map, anpr, and people counting power sitc : ac 100v~240v, 50/60hz,regulatory : ce, fcc,ul and rohs; preferred make: honeywell/bosch/hikvision/pelco/sony mr sitc of 16 channel nvr processor : dual core embedded processor, operating system : pre loaded licensed os,ip camera support up to 16 ch , should support h.265+/h.265/h.264+/h.264 video formats, up to 2 ch @ 8mp or 4 ch @ 4mp or 8 ch @ 1080p decoding capacity,1 hdmi and 1 vga interfaces: both interfaces support independent video output,4 hdds for continuous video recording, up to 256 mbps incoming bandwidth, outgoing bandwidth 160 mbps, audio output 1 ch, rca (2.0 vp p, 1 kω, using the audio input ),two way audio 1 ch, rca (2.0 vp p, 1 kω, using the audio input ),video output mode hdmi/vga independent output, recording resolution 12 mp/8 mp/6 mp/5 mp/4 mp/3 mp/1080p/uxga/ 720p/vga/4cif/dcif/2cif/cif/qcif,sata 4 sata interfaces of capacity up to 10tb capacity for each hdd, serial interface 2 rs 485 (half duplex), 1 rs 232, usb interface front panel: 2 × usb 2.0; rear panel: 1 × usb 3.0, smart phone connectivity through app or browser : iphone, ipad, android, windows phone, should support multiple vca (video content analytics) events, configurable special camera smart functions, such as vca detection (motion, line crossing, intrusion, etc.), heat map, anpr, and people counting power sitc : ac 100v~240v, 50/60hz,regulatory : ce, fcc,ul and rohs; preferred make: honeywell/bosch/hikvision/pelco/sony mr sitc of 6tb surveillance grade hard disk for nvr for 30 days back up; make seagate/wd mr 43 4k led panel,preffered make lg/samsung/panasonic mr supplying and fixing of hose cabinet of size 450mm x 450mm x 250mm made of 2mm thick m.s. sheet with 6mm thick glazed glass door including necessary locking arrangment suitable to accomodate 1 nos. 15 mtr. long hose pipe, 1 no. branch pipe mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect. ...

Drinking Water And Sanitation Department - Jharkhand

30481240 request for proposal from uv visible double beam spectrophotometer manufacturers for supplying ultra pure double beam ( uv visible wave length range ) spectrophotometer with one year warranty and five years comprehensive maintenance contract for 24 no request for proposal from uv visible double beam spectrophotometer manufacturers for supplying ultra pure double beam ( uv visible wave length range ) spectrophotometer with one year warranty and five years comprehensive maintenance contract for 24 no , technical specification of double beam ( uv visible wavelength range ) spectrophotometer optical system double beam ( uv visible wavelength range ) , diffraction grating minimum 1200 lines / mm , photometric details range must cover from 0.3 to +3, accuracy must cover minimum range=±0.002 absorbanceat 1 absorbance, stray light < 0.05 %t@220, 340 ( must cover less than 370nm ) , baseline flatness must cover± 0.006a, detector photodiodes / single photodiodes / dual silicon photodiodes, power 240v± 10%, 50 / 60hz, light source xenon flash lamp , wavelength details range must cover 190nm to 1100nm, accuracy must cover ±0.2nm, repeatability must cover±0.005nm, resolution below or upto 0.1, bandwidth must cover 1.0 nm, measuring modes absorbance, transmittance ( % ) , concentration, operating modes single wavelength, multiplewavelength, time scan, data presentation display of analysis results & graphic data on the screen, pc link software, port for data transfer, upplier should provide service for installation, demonstration, training for all operation procedure, temperature range operating conditionsshould cover +10 degree c to 40 degreec, analytical quality assurance instrument should have internal analytical quality assurance system with additional options for customizing the analytical quality assurance tools, certification must comply ce certification , accessories : quartz cuvettes 50mm length , 10mm , 20 mm path length / width, cuboidal ( each 2 pairs ) glass cuvettes 50mm length, 20 mm, 10mm path length / width, cuboidal ( each 4 pairs ) , cuvette holder for holding 50mm rectangular cuvettes ( 2 nos. ) , personal computer must be an iso certified and branded and should be suitable for assembling quoted spectrophotometer display size 50 60.45cm, windows original windows 10, compatible to support software to run uv visible spectrophotometer, memory minimum 4gb, processor i3 / i5 processor, graphics integrated graphics, hard drive 1tb ( 1 terabyte ) computer accessories mouse, key board, central processing unit ( cpu ) , other accessories ups and battery 2 kva online ups 192 v with inbuilt isolation transformer, battery 65ah 12v should be an iso certified and compatible for using quoted spectrophotometer , comprehensive maitenance contract ( for s.n.1&2 ) ...

Building Construction Department - Jharkhand

28849171 quotations are invited through online for construction materials from reputed shop keepers, manufacturers, suppliers, retailers, distributors, timber merchants and others for following items 1 providing and fixing door shutter with wooden framed by 30mm thick both side best quality ply and veneer 4mm thick veneer of green décor make both side pasting finishing with melamine paint with all material and labour all complete ( including all fancy type fitting ) as per building specification and direction of e / i. 2 providing and fixing choukhat paneling with 12mm thick ply and 4 mm thick veneer both side pasting finishing with all material and labour all complete as per building specification and direction of e / i. 3 s / f / f all height wall paneling of 12mm thick water proof ply ( centure panic pine wood, isi mark, termites ) over 2x1 aluminum section, 4mm thick water proof veneer ( green dacore wood ) finishing with melamine polished all complete including all taxes and royalty all complete as per building specification and direction e / i 4 providing and laying machine cut, mirror polished italian marble stone flooring, in required design and in patterns in combination with italian marble stones of different colours, shades and finished surface texture of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 40 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with white cement slurry @ 4.4 kg / sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge 5 providing and applying plaster of patta paris over plastered surface to prepare the surface even and smooth complete. 6 supply fitting and fixing best quality wallpaper do complete job. 7 providing mellamine over new wooden surface to give desired texture and glossinculding wood filter with all labour and material all complete work as per instruction of e / i 8 providing and applying anti temite treatment wiyh all labour and material all complete work as per instruction of e / i 9 providing and laying app ( atactic polypropylene polymer ) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre / sqm by the same membrane manufacture of density at 25°c, 0.87 0.89 kg / litre and viscocity 70 160 cps. over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc, and preparing the surface complete. the vital physical and chemical parameters of the membrane shall be as under : joint strength in longitudinal and transverse direction at 23°c as 650 / 450n / 5cm. tear strength in longitudinal and transverse direction as 300 / 10 s / f / f cubical glass with dorma fitting as per direction e / i size 5 x 4 11 providing & fixing curtain of superior quality approved fabric material curtain & astar with rings , bukram , stiching charges making adequate plats fixing in prefixed curtain rod & power track as per direction of e / i curtain cloth make pure / dicitex / gmf 12 supply fitting & fixing shear all complete including all complete as per building specification and direction e / i 13 supply fitting & fixing bed. size ( 6.333 / 7.00 ) with 19 mm green plywith veneer and malamine polished including all complet job with nesesarry nail & hing.supply with head board sizd ( 8.75 / 4.00 ) with 19 mm green play , teak veneer, decorative type raxin steeching all complet job. 14 supply fitting& fixing side table size ( 1.33 / 1.33 ) with 19 mm green play drawer with veneer & malamine ploise all complet job. 15 supply fitting & fixing vip boss chair with teak wood frame with high quality leather, , with sleepwell foam do do all complete with malamine polish. 16 supply fitting fixing lunch / tea table size ( 29 x 1 2 x19 ) with 19 mm green play with veneer polished etc all complete job. 17 supply fitting fixing lcd cabint with matching to bed veneer polished etc all complete job. 18 supply fitting & fixing decorative type photo freaming with teak wood , desizne finished of size ( 43 x24 ) with matel artistical finished. 19 supplying and setting vip pillow size ( 27x17 ) with recron materials. 20 supplying and setting vip pillow cover with bed sheet of soft cloth. 21 supplying and setting vip blanket hypoallerjetic cloth with alovera gel size ( 93 x 73 ) 22 supplying and setting quilt / comforter double gsm white 100% cotton 23 s / f / f matteress make spring well quality 78x72x6 24 s / f / f dinning table eight seater complete made with teak wood, highly melamine polish with onyx italian marble top polish with polyurethene and chair ( high quality fabric ) 25 s / f / f center table size ( 48x48 inch ) with superior quality lamination inside and outside with italian marble top as per direction of e / i 26 s / f / f supplying of one seater premium sofa with febric finish , all complete as per direction of e / i 27 s / f / f supplying of 2 seater premium sofa with febric finish , all complete as per direction of e / i 28 s / f / f supplying of 3 seater premium sofa with febric finish , all complete as per direction of e / i 29 providing & fixing wardrobe with both side laminated inner lining and exterior fitted with hanging rod including all fittings like hing , lock , handal all e.t.c as per instruction of e / i 30 providing and laying 14mmthk fsc certified bamboo wooden flooring of size 125mmx1850mm. the planks shall be provided with tongue & groove required for locking. the flooring to be layer with 5mm underlay foam and 60 microns ldf film placed over it as moisture barrier to proper level with necessary edge profile & transition strip where ever necessary complete as per manufacturers instructions. the rate shall include cost and conveyance of all materials, labour charges, lead, lift, laying self leveling screed 3 5mm thk etc. all complete as specified and as directed by the engineering measurement of flooring will be the actual laid area including skirting and transition bands with the near by floor, skirting where ever applicable ) . 31 providing waterproof texture exterior work by asian paints design dholepur 32 s / f / f board wall partition with itching glass vertical standing position including all materials, labour , taxes all complete as per building specification and direction of e / i framing with wooden beat or 19mm thick centre make water proof ply board both side shuttering with 12 mm thick water proof centure ply veneer 4mm thick veneer of green décor make glass: 5mm thick saint gobine glass 33 supply, fitting, fixing and testing of dtreet light led lighting luminaire aerodynamically shaped single piece pressure die cast aluminum luminaire with high power leds as light source and electronic driver ( ip65 ) , along with 90 / 100w led lamp, as energy saving as per drawing prescribed reflector and heat resistant toughened flat glass cover, reflector and heat resistant toughened flat glass cover ( ip 65 ) and in compliance to iec safety standards. lm 79 and lm 80 reports to be submitted with all accessories. make: philips / trilux / jaguar / lighting technology. 34 supplying and fixing tpn sheet enclosure on surface or recess along with 25 / 32 amp 415 volts, , c curve, tp mcb complete with connections, testing and commissioning etc. as required. make ( legrand / l&t / siemens / schneider ) 35 supplying and fixing tpn sheet enclosure on surface or recess along with 63 amp 415 volts, , c curve, tp mcb complete with connections, testing and commissioning etc. as required. make ( legrand / l&t / siemens / schneider ) 36 supplying and fixing of modular type 25 ac unit box with on / off mcb on surface or in recess complete with connections, testing and commissioning etc. as required. ( to use for split ac ) make ( legrand / l&t / siemens / schneider ) 37 luminaires supplying and fixing recess mounted 18 watt led ( warm light ) ( 100 lm / w ) vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceiling including connection with 1.5 sq. mm fr pvc insulated copper conductor cable and earthing the body etc. as required. make : .trilux / lighting technology / philips / jaguar. 38 supplying and fixing single wall mounted 9 / 11 watt ( 2ft long ) led warm light ( 100 lm / w ) type batten fitting complete with electronic diver and led etc. directly on wall / ceiling including connections with 1.5 sq. mm fr pvc insulatted copper conductor and earthing the body etc. as requiered. ( to use as mirror light in toilets ) make : trilux / lighting technology / philips / jagaur. 39 suppling and fixing of recess / surface 23 / 24watt ( 1ftx1 ft ) led ( warm light ) 100lm / w, downlighter complete with electronic diver and led etc. directly on wall / ceiling including connections with 1.5 sq. mm fr pvc insulatted copper conductor and earthing the body etc. as requiered. ( to use in double height area ) make : trilux / lighting technology / philips / jagaur. 40 suppling and fixing of surface 15 / 18watt led downlighter ( warm light ) 100lm / w etc. directly on wall / ceiling including connections with 1.5 sq. mm fr pvc insulatted copper conductor and earthing the body etc. as requiered. make : trilux / lighting technology / philips / jagaur. 41 supplying and fixing 4 long 1x 40 watt or ( 2x20w ) suspended type led ( warm light ) ( 100 lm / w ) luminaire provides soft light and glare free symmetrical illumination complete with all accessories etc. including ball and socket arrangement, 2 no. down rods of 20mm dia x 1.6 mm thick g.i. pipe upto 30 cm. length, painting and wiring the down rods and connection with 1.5 sq mm fr pvc insulated copper conductor, single core cable and earthing etc. as required. make : .trilux / lighting technology / philips. / jaguar 42 supplying and fixing following watt led flood light luminaire with integral control gear, lenses, heat resistant toughened clear glass cover, with black powder coated aerodynamically shaped single piece pressure die cast aluminum luminaire with high power leds as light source and electronic driver ( ip65 ) , along with 120 led warm light, ( 4000k ) as energy saving as per drawing prescribed reflector and heat resistant toughened flat glass cover including connections with fr pvc insulated copper conductor cable and earthing the body along with all fixing accessories etc. as required, with proper iron clamps, nut bolts with washers etc. to fix on minimum 65 mm dia g.i. pipe in front of stage of auditorioum of museum as per direction of e / i or consultant as per drawing prescribed reflector and heat resistant toughened flat glass cover ( ip 65 ) and in compliance to iec safety standards. lm 79 and lm 80 reports to be submitted. make : trilux / lighting technology / philips / jagaur. 120 w led flood warm light ( 3000k ) 43 supplying and fixing surface mounted 10 / 12 watt led type bulk head e comprising of pressure die casr housing with acrylic diffuser ( ip65 ) and complete with integrated electronic driver etc. directly on wall / ceiling including connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc as required. make : trilux / lighting technology / philips / jagaur. 44 supplying and fixing 25 / 30 watt led type post top lantern suitable for garden / park / gate light complete with integrated electronic driver and all accessories including connection with pvc insulated copper conductor cable and earthing the body etc. as required and in compliance to iec safety standards. lm 79 and lm 80 reports to be submitted . make: philips / trilux / wipro. / lighting technology. 45 supplying and fixing of decorative wall bracket fixture in chromne finish with glass diffuser suitable for 2 x15 watt cfl / led lamp directly on wall including connection with 1.5 sq. mm fr pvc insulated copper conductor cable and earthing the body etc. as required. ( but without lamp ) make: philips / trilux / crompton / havells / jagaur.cost of decorative wall bracket fixture 46 supply of 15 watt led lamp. ( luminous flux 600lm, cct 6500k ( cool white ) , cri 80, rated voltage 220v / 240v. beam angle 120 degree, life 25000hrs. ) make: philips / trilux / havells / jagaur.tel. solution providing, fixing, connecting & testing of krone box ( telephone tag block ) in a thermoplastic, ip 65 ( weather proof ) enclosure, internally embedded gasket, anti corrosive, insulated and shock proof with provision for cable through ip 65 glands complete in all respects. ( make : matrix / alcatel / avaya. ( cost from gem ) 47 10 pair tag block ( krone box ) ( 136 mm x 253 mm x 115 mm ) 48 20 pair tag block ( krone box ) ( 136 mm x 253 mm x 115 mm ) 49 50 pair tag block ( krone box ) ( 300 mm x 300 mm x 70 mm ) providing, laying, connecting, testing & commissioning of multi core telephone un armoured cables of conductor size 0.5 sq.mm. annealed tinned electrolitic grade copper, pvc insulated, twisted pairs bunched together, over all pvc sheathed, gi strip or wire armouring laid on existing cable tray or along the wall or laid in pipes or in trenches including excavation of cable trench, sand filling covering with bricks and back filling complete as required. ( make : finolex / polycab / havells ) 50 10 pair pistl10pxo. 51008 51 20 pair 52 50 pair 53 supply and installation of digital telephone set with caller id system with connecting cord and jacks at user end. ( provision of id caller telephone for reception ) make: ( beetel / panasonic / orpat ) . 54 ip pbx system: supply, fitting, fixing, commissioning and testing of ip based 100% non blocking ip pabx system should be a ip compatible with rich feature set of the system and can be connected with pure voice over ip ( voip ) communication network across corporate local and wide area networks ( lan and wan ) as & when required. central processing unit: the system main software should be open architecture based. the cpu of main system shall be 32 bit processor working at 2.0 ghz or better. the system should be wall mountable. • system architecture should be latest pure ip and should be wall mountable meet me conference 30 party x 2 from day 1 must be available. must support unified communications equipped with 64 analog extensions 32 ip extensions alongwith ip user license loaded from day expandable upto 256 ip extensions, voip card in built charger, battery with one our back up facitity. 32 analog trunk ports, 1 pri , 02 ports auto attendant ipabx. make: avaya / nec / alacatel 9 u wall mount eqauipment rack 55 sitc of of 9u wall mounted networking cabinet 504.65x600x500 ( hxwxd ) : rack must be along with the following components like; width ( mm ) 600, depth ( mm ) 500, approx.net wt ( kg ) 20, crca d grade thickness ( mm ) 1.2, ral 9017 ( matt black ) , glass 4mm toughened tinted glass door, accessories:, cooling fan ( 230v a / c 90 cfm ) 2 nos, pdu 230vac 1 no, cable manager metal 2 nos, mounting hardware ( 20 sets of m6 screws, washer, cage nuts ( nickel coated ) ) 1 no, wall screws ( 4 sets of 2 screws, washer, rubber grommet ( nickel coated ) ) 1 no, door lock 1 no, front metal band 1 no. in the rack there must be maintained 1 u = 1.75 inches space. ( make : make : legrand valrack / netrack / rittal / schneider / ortronics or as approved by architect ) . ( for lan ) cost of wall mount 9 u network rack 56 surveillance ( cctv system ) sitc of 2 mp bullet varifocal ip ( ir ) indoor bullet camera ( 2.8 12mm lens ) ( matrix ) , 3 years warranty, day night type, 1 / 2.8progressive scan cmos, 1920 × 1080 at 25fps, 2.7 to 13.5 mm lens, 0.01 lux at f1.2, 0 lux with ir, icr, onvif ( profile s, profile g ) , support h.265, h.264, mjpeg, 120db wdr, 3d digital noise reduction, three individually configurable stream, 12 vdc & poe, ir range: 40m, support on board storage up to 128 gb ( sd card not included ) , alarm: 2 inputs & 2 outputs, audio: 1 input & 1 output, ip67, edge anlalytics line crossing detection, intrusion detection, scene change detection, motion detection, face detection, audio exception detection, video tampering, ul, fcc, ce certified. make axis / hikvision / pelco / honeywell or as appoved by architect / consultant. 57 sitc of matrix 2 mp ip mini dome indoor camera with 3.6 fixed lens, audio support, 3 years warranty, resolution d1 ( 704 x 480 pixel ) , hd ( 1280 x 720 pixel ) , full hd ( 1920 x 1080 pixel ) day night type, ( progressive scan cmos, 1920 × 1080 at 25fps, 2.7 to 13.5 mm lux at f1.2, 0 lux with ir, icr, onvif ( profile s, profile g ) , support h.265, h.264, mjpeg, 120db wdr, 3d digital noise reduction, three individually configurable stream, 12 vdc & poe, ir range: 40m, support on board storage up to 128 gb ( sd card not included ) , alarm: 2 inputs & 2 outputs, audio: 1 input & 1 output, ip67, edge anlalytics line crossing detection, intrusion detection, scene change detection, motion detection, face detection, audio exception detection, video tampering, ul, fcc, ce certified.make axis / hikvision / pelco / honeywell or as appoved by architect / consultant. 58 sitc of 2mp ir bullet fixed camera 1 / 2.8progressive scan cmos, 1920 × 1080 at 25fps, 2.8 mm fixed lens, 0.01 lux at f1.2, 0 lux with ir, icr, onvif ( profile s, profile g ) , support h.265, h.264, mjpeg, 120db wdr, 3d digital noise reduction, three individually configurable stream, 12 vdc & poe, ir range: 40m, support on board storage up to 128 gb ( sd card not included ) , ip67, edge anlalytics line crossing detection, intrusion detection, motion detection, scene change detection, video tampering, ul, ce, fcc certified. make axis / hikvision / pelco or as appoved by architect / consultant. 59 sitc of 32 ch nvr with 32 tb storage ( sparsh ) ( sparsh & sr nv32f608 he ) connect up to 32 ip support cameras, 2 u rack mounting confrigation dual os design, up to 12 megapixels resolution, 2 hdmi output with one atleast at 4k ( 4096×2160 ) , 1 vga output with 2mp resolution, support h.265 / mjpeg, incoming bandwidth 500 mbps, 8 sata hard disks, anr technology, 16 sata interfaces for 8 hdds and capacity of each hdd upto 8 tb, front panel: 1 × usb 2.0 rear panel: 2 × usb 3.0, alarm i / o 16 / 4, rs 485, 4 rj 45 10 / 100 / 1000 mbps self adaptive ethernet interface, multiple network monitoring: web viewer, ce, fcc, ul certified with survelliance sd crad , with 8 tb storage ( inclusive of 8 tb surveillance hard disk: 4 nos. ) make axis / hikvision / pelco or as appoved by architect / consultant. 60 6 u wall mount equipment rack sitc of of 6u wall mounted networking cabinet 504.65x600x500 ( hxwxd ) : rack must be along with the following components like; width ( mm ) 600, depth ( mm ) 500, approx.net wt ( kg ) 10 12, crca d grade thickness ( mm ) 1.2, ral 9017 ( matt black ) , glass 4mm toughened tinted glass door, accessories:, cooling fan ( 230v a / c 90 cfm ) 2 nos, pdu 230vac 1 no, cable manager metal 2 nos, mounting hardware ( 20 sets of m6 screws, washer, cage nuts ( nickel coated ) ) 1 no, wall screws ( 4 sets of 2 screws, washer, rubber grommet ( nickel coated ) ) 1 no, door lock 1 no, front metal band 1 no. in the rack there must be maintained 1 u = 1.75 inches space. ( make : make : legrand valrack / netrack / rittal / schneider / ortronics or as approved by architect ) . 61 sitc of 43 lcd 24x7 surveillance monitor ( ( smart tv ) . make lg / samsung or as appoved by architect / consultant. make: sony, lg, panasonic t, v. set 62 sitc of 55 full hd 1080p led tv.; firstouch smart television tv 55inch led backlit lcd , resolution ( pixels ) ( 3840x2160 ) uhd, screen size 55 , smart tv, details of accessories ( included in the scope ofsupply ) : remote control, connecting cable, batteries, dimensions ( length xbreadth x depth ) 52” x 1.2” x 31.4. wall mount. power consumption 138 watt. wifi direct, built in wifi. make soni / lg, / samsung / panasonic. cost of 55 full hd led panel tv ( cost without gst ) 63 electrical appainces refrigerator supply, fitting, fixing and testing of eie 220 l 3 star direct cool double door refrigerator ( eie ) refrigerator is:1476 latest for direct cool with following specifictions: ( make: sansui / samsung / haier / lg / kelvinator. capacity: 220 lit. power requirement: 220 240 v, 50 hz insulation: puff eco friendly refrigerant compressor type: power saver compressor defrosting type: direct cool type: single door built in stabilizer: yes warranty: 1 year cost of refrigerator 220 lit. 64 supply, fitting, fixing and testing of liebherr 420 l 2 star frost freedouble door refrigerator ( liebherr ) ( tdcs 4740 ) refrigerator conformity to indian standrad : is:15750 ( 2006 ) for frost free latest for direct cool with following specifictions: . ( make: sansui / samsung / haier / lg / kelvinator ) capacity: 420 lit. power requirement: 220 240 v, 50 hz insulation: puff eco friendly refrigerant compressor type: power saver compressor defrosting type: direct cool type: single door built in stabilizer: yes warranty: 1 year cost of refrigerator 420 lit. 65 supply, fitting, fixing and testing of 3 star direct cool single door refrigerator is:1476 latest for direct cool with following specifictions: . make: sansui / samsung / haier / lg / kelvinator capacity: 80 lit. power consumption: 289 kwh / yhr power requirement: 220 240 v, 50 hz insulation: puff eco friendly refrigerant compressor type: power saver compressor defrosting type: direct cool type: single door built in stabilizer: yes warranty: 1 year total cost of refrigerator. 66 supply, fitting, fixing and testing of microwave oven 900 w 5 star rating 23 l along with the microwave oven will automatically protect you in the offset of an accident and facilities with timer, preheat, defrost, reheat, convection heating, touch contol pannel, adjustment of microwave power, conformity to indianstandard is 11676, heatingchamber stainless steel, along with all accessories & 1 year warranty. make: godrej gmx 25ca1 miz / samsung ce1041dsb2 / haier / lg. 6 kva ups 67 supply, fitting, fixing, testing and installation of 6.0 kva, technology igbt pwm withoutinbuilt isolationtransformer, input power single phase 160v 260v sinewave, 50hz & single phase 230v output on line ups system with 12v / 26 ah sealed maintenance free batteries backup protection for 90 minutes and all accessories as required of reputed make ups. with 46 nos. 26ah, 12v battery. make: apc / emerson / numeric. details of ups : technology : micro processor based controls, true online, double convertion type, should have cold start facility. overall efficiency :> 90% isolation ; built in isolation transformer at the output of ups system. charger : should have built in charger of minimum 10 amp. back up time : 90 min. with smf batteries. vah required : minimum 14352 for 6 kva ( 26h x 46 n0s.x 12v ) = 14352vah ) display : should have lcd display with event logging facility. upgradeability : should have upgradable to work as parrallel redundent ups in load sharing mode. shoftwere comunication : should have snmp ( simple network management protocol ) compatability ( optional ) . input current harmonic shall be less than 3% with the application of igbt ( insulated gate bypolar transistor ) best rectifier, but 6 / 12 pulse is not applicable. sealed maintenance free smf batteries for 6kva ups for 90 mins. backup with open type cabinate for installation of batteries and their respective battery leads copper cables / buslinks between batteries, copper cables between ups & batteries, with dc mccb box and required capacity of mccb. make : global yuasa / exide / uplus / hbl cost of sealed maintenance free smf batteries with stand with 6kva ups. 68 water purifire supply , fitting fixing and commissioning of indian water inc. pure waterfor life fully automatic with autocut off ro potable waterpuri 2000 plus 25 litre ro+uv+uf water purifier electrically oparated • purification technology ro+uv+uf• capacity 25 litre • filter pre filter ( optional ) , sediment filter, activated carbon filter, anti scalant filter, post uf filter, • membrane type 80 gpd, • power features • power requirement 110v 300v, 50 hz, • operating voltage 24v dc v along with all required accessories, like, connecting wires, pipes, stand and fixing euipments along with drain pipe in put pipe and etc as required. make aquagard, voltas, kent.cost of water purifire indian water inc. pure waterfor life 2000 plus 25 litre ro+uv+uf water purifier electrically oparated • purification technologyro+uv+uf• capacity 25 litre • 69 1.5 ton 5 star split ac supply , fitting, fixing and testing of 1.5 ton 5 star high wall split ac ( cooling only ) unit of bee 5 star rating, etc as required. make: hitachi / daikin / carrier mitsubishi. 3 ton 4 star cassette ac 70 supply, fitting, fixing and testing of 3 ton 4 star ceiling mounted ( cassette ac cooling ( hdum100cr s / hdc100cr 5 ) ) unit of bee 4 star rating, etc as required. make: hitachi / daikin / carrier. mitsubishi. 4 ton 4 star cassette ac 71 supply, fitting, fixing and testing of 4 ton 4 star ceiling mounted ( cassette ac cooling r410a ) ) unit of bee 4 star rating, etc as required. make: hitachi / daikin / carrier. mitsubishi. 72 installation charge of cassette ac 73 copper pipe with insulation 74 hard pvc drain pipe 75 4 core 4sqmm copper cable 76 bracket for outdoor unit of ac 77 led cove linea plus ( strip ) sitc of 5 mtr set led cove linea plus ( warm light ) led 25 w tape with driver ( blue or yellow in colour ) easy to install, maintain and comes with suitable driver energy saving strip tape light ( 3000 / 4000 ) base & lamp . for architectural: accent , good protection against water and dust ingress and impact, with all accessories. ( indoor application ) make make: philips / equivallent in trilux / jaguar / lighting technology track light 78 supply, installation, testing and commisning of 26 / 30w track mounted accent lighting luminaire with compact housing and slim gear box with color rendering index of 90 for architectural: accent , good protection against water and dust ingress and impact, led track with option of one meter track. make: philips flex acent g 2, st391t led20 / 930 psu e nb 1c wh in / equivallent in trilux / jaguar / ( 3000 / 4000k ) track integral bollards: 79 providing, fitting, fixing and testing of bollard light decorative luminaire light fixture of 800mm in length ( ip 65 ) 9 / 10 w led lamp available in cct of 3000k / 4000k with integrated baseplate and driver for easy installation, operating voltage of 220 240 v, wide beam optics and transluscent diffuser tube. the fixture should have extruded aluminium housing and heat resistant silicone rubber gasket, operating temperature ranging from 20° c to 40°c, the fixture should have ip65 protection and ik10 impact resistance. driver shall be high efficiency having efficiency > 85% and in compliance to iec standards. with foundation, commissioning, testing all with all other accessories as per drawing provided at the time of work execution or as per the direction of e / i ) make philips bcp150 led150 / nw psu 220 240v 7043 9w / trilux dtindlbled 800 840et 10w / jaguar / lighting technology / havells cost of bollard light fixture with 9w led lamp cost of terminal box ( size 8 x 6 x 4 ) of 2 mm crca sheet steel powder coating with locking arrangement and rubber gasket etc. 2a sp mcb make l&t, hager, legrand 2 nos. stud type 4 studs 20a connector ( 1 no. for incomer and 2nd for outgoing cable ) total cost of bollard light with all above accessories. 80 step light ( out door application ) sitc of step light ( warm light ) robust design led 4 w step light is ip67 / ik10, easy to install, maintain and comes with suitable mounting box, energy saving step light grey clour packed with features applications ( 3000 / 4000k0 . for architectural: accent , good protection against water and dust ingress and impact, with all accessories. ( steps of open air theater out door application ) make make: philips bwg150 led50 / nw psu 220 240v ip67 7043 / trilux / jaguar / lighting technology / havells. 81 garden spike light ( out door application ) supply, installation, testing and commisning of 12w led garden spike light ( cob integrated lighting ) solution lighting family for architectural: accent , good protection against water and dust ingress and impact, with all accessories. ( ip 67 out door application ) make: philips / trilux / jaguar / lighting technology / havells. 82 supply, fitting, fixing of wall mount suitable capacity ( 4 kva ) automatic voltage stabilizer, voltage range 130v to 280v of copper wound transformer along with suitable size of connecting 3 mtr 3 core 2.5 sq. mm flexible copper cable ( indoor unit to stabilizer ) make v guard / totaline / sen & pandit. 83 25a 2 / 3 module switch and socket ( for geyser ) : supplying fixing and testing of 25 amps 240 volts 2 / 3 module separate switch and socket in existing g.i.box with front plate in recess, for the switch and with indicator, socket outlet to be installed in different locations as shown in drawing and complete with connections, testing and commissioning etc. as required. make: legrand ( arteor ) / schneider ( zencelo ) / mk ( blenz ) suppy of electric kattle along with all accessories and following specifications: . capacity: 1.7 / 1.8 lit. consume: 1800 2200w suitable for tea, water & soups. auto switch off facility body type: metal body stainless type warrenty: 2 year make: philips / bajaj / havells cost of electric kattle 84 electronic hooter: supplying, installation, testing and commissioning of duel tone electronic hooter suitable for wall mounted complete as required. 85 main lt panel supply, designing, unloading , shifting to location, manufacturing and effecting proper connection installation, testing and commissioning of all incomer and outgoing of lt panel fabricated out 2 mm ( 14 swg ) crca sheet steel dust, damp and vermin proof ( ip 42 ) free floor standing factory built sheet steel enclosed modular construction extendable panel, suitable for operatrion on 415 + 10% volts, 50 hz ac 3 phase 4 wire system, hinged doors of 2mm thick crca sheet, duly painted ( powder coated ) complete with aluminium bus bars, interconnection with frls pvc copper wire, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per drawing and technical specifications attached etc. complete as required. the sheet steel under go minimum 7 tanks treatment followed by finishing of powder coating of minimum 60 micron thickness, duly compartmentalized having accessories mounted inside the cubical panel, earthing with 2 nos. earth studs. the panels shall be preferably arranged in multitier formation. these shall be of adequate size with a provision of 10 percent vacant space to accommodate future additional switch gear in addition to spare feeders presently provided. the size of the panel shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component do not attain temperature rise more than 40 degree celsius. location : in panel room. the name plate for each feeder must be in anodized aluminium sheet. panel size as per drawing and shall be provided at the time of work order. al. bus bar the panel includes 415v, 400 a, 3ph, 36ka, 50hz electrolytic aluminium bus bar ( e91ewp ) aluminium earth bus with removable glands plates, cable glands at sending and receiving ends, including connection with outgoing feeders complete in all respects. the electrolytic aluminium bus bar of grade 63401 wp as per i:s 5082 of suitable length and insulated by heat shrinkable sleeves red, yellow, blue and black as r y b & n. the current density of bus bar shall be minimum 0.8 a / sq mm. minimum clearance between live parts / neutral to earth shall be 19mm. however clearances between terminals at components shall be as per applicable individual standard for components. interconnections between the main bus bars and individual units shall be made with 2.5, 4, 6 & 10 sq mm frls pvc cu. wire with 35 & 63mm 4 studs ( brass ) treminal blocks, aluminium bus bars of adequate rating. al. bus bar will be supported on insulators made of non hygroscopic, non inflammable material with tracking index equal to or more than that defined in bis contractor will provide shop drawing sld & ga drawing along with bom with cat. no. of each and every components and switch gears of lt panel for approval of consultant. inspection of the lt panel shall be carried out at panel builders factory by the consultant before final delivery for that all arrangements shall be made by the contractor. all 4 pole mccb with thermomagnetic based release must have follwing characterstics: 1. icu=100% ics. 2. with positive isolation marked. 3. with adjustable short circuit and over load. 4. as per iec 60947 2. make of mccb l&t d sine / legrand dpx³ / schneider nsx / siemens 3vl. make of mcb ( 10ka c series. ) l&t u version / legrand dx³ / schneider acti / siemens. bill of material of main lt panel: 1 set of fabrication part of lt panel & busbar system, in crca sheet steel enclosure ( ip 42 / 43 ) without any components & its busbar system, in crca sheet steel enclosure without any components. name of panel builder : jmd electrotech, kokar, arnav poertech, tatisilway, tts systematix private ltd, tatisiway, meditron, meshra, ranchi or any approved panel builders of above make switch gears. indicating 1 sets multifunction meter having led display accuracy class 1 as per iec 62053 21, rs 485 port, ( ethernet / modbus ready suitable for monitoring and control with bms system ) in built rtc, aux supply: 44 277vac / dc. parameters: volts, amps, pf, thd, f, w, wh, va, vah, var, varh, runhrs, onhrs interrupts, thd for v&i per phase, individual harmonics for v&i upto 15th level complying with iec61557 12. min / max for eight parameters. sampling rate: 64 samples per cycle. make schneider / satec / siemnes 3 nos. ct of 400 / 5va 5 class one epoxy resin cast ct ( 3 nos. ) =1 set. make: kappa / matrix 3 sets phase indicating light shall be protected by 2 amps sp mcbs for incomer & outgoing.make l& t / ae / schneider. interlocking provision of mechnical interlocking between 400a / fp / 36ka mccb as common incoming and 1 no. of 400a on load change over for d.g incomer, in such a way so that the two supplies are not parallel at any time. incomer : 1 no. 400a fp / 36ka / mccb with adjustable thermomagnetic release type with s / c & o / l protection with with front rotary handle type with spreader links with on off trip indication. ( incoming cable size –1 run 300sq mm 3.5 core al. ar. cable ) . 1 no. 400a tpn on load change over panel mounted open execution typesuitable arrangement for terminal of al. cable out going 1 no. 250a fp mccb ( 25ka ) with adjustable thermomagnetic release type with s / c & o / l protection with front rotary handle type with spreader links with on off trip indication. ( to lt panel of residence ) . ( cable size 1 run, 120 sq. mm. 3.5 core al ar. cable ) 1 no. 200a fp mccb ( 25ka ) with adjustable thermomagnetic release type with s / c & o / l protection with with front rotary handle type with spreader links with on off trip indication. ( for 1 no. for lt panel of office ) cable size 1 run, 120 sq. mm. 3.5 core al ar. cable ) 5 nos. 63 a fp mccb ( 25ka ) with adjustable thermomagnetic release type with s / c & o / l protection with front rotary handle type with spreader links. with on off trip indication. ( 2 no. for out door feeder pillar panels, 1 no. for tpn db out house, 2 nos. as spare ) 4 nos.25a / fp / 25ka / mccb thermomagnetic release type, on of trip and s / c , o / l protection, on off indication with rotary handle & spreader links. ( 1no. for pump motor, 2 nos. as future use and 1 no as spare ) 2 nos. 32a 10 ka, dp mcb c series 2 nos. 63a 10 ka, dp mcb c series total cost of main lt panel lt panel residence 86 supply, designing, unloading, shifting to location, manufacturing and effecting proper connection installation, testing and commissioning of all incomer and outgoing of lt panel fabricated out 2 mm ( 14 swg ) crca sheet steel dust, damp and vermin proof ( ip 42 ) wall mounting factory built sheet steel enclosed modular construction extendable panel, suitable for operatrion on 415 + 10% volts, 50 hz ac 3 phase 4 wire system, hinged doors of 2mm thick crca sheet, duly painted ( powder coated ) complete with aluminium bus bars, interconnection with frls pvc copper wire, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per drawing and technical specifications attached etc. complete as required. 87 the sheet steel under go minimum 7 tanks treatment followed by finishing of powder coating of minimum 60 micron thickness, duly compartmentalized having accessories mounted inside the cubical panel, earthing with 2 nos. earth studs. the panels shall be preferably arranged in multitier formation. these shall be of adequate size with a provision of 10 percent vacant space to accommodate future additional switch gear in addition to spare feeders presently provided. the size of the panel shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component do not attain temperature rise more than 40 degree celsius. location : suitable location the name plate for each feeder must be in anodized aluminium sheet. panel size as per drawing and shall be provided at the time of work order. al. bus bar the panel includes 415v, 300 a, 3ph, 25ka, 50hz electrolytic aluminium bus bar ( e91ewp ) aluminium earth bus with removable glands plates, cable glands at sending and receiving ends, including connection with outgoing feeders complete in all respects. the electrolytic aluminium bus bar of grade 63401 wp as per i:s 5082 of suitable length and insulated by heat shrinkable sleeves red, yellow, blue and black as r y b & n. the current density of bus bar shall be minimum 0.8 a / sq mm. minimum clearance between live parts / neutral to earth shall be 19mm. however clearances between terminals at components shall be as per applicable individual standard for components. interconnections between the main bus bars and individual units shall be made with 2.5, 4, 6 & 10 sq mm frls pvc cu. wire with 35 & 63mm 4 studs ( brass ) treminal blocks, aluminium bus bars of adequate rating. al. bus bar will be supported on insulators made of non hygroscopic, non inflammable material with tracking index equal to or more than that defined in bis contractor will provide shop drawing sld & ga drawing along with bom with cat. no. of each and every components and switch gears of lt panel for approval of consultant. inspection of the lt panel shall be carried out at panel builders factory by the consultant before final delivery for that all arrangements shall be made by the contractor. all 4 pole mccb with thermomagnetic based release must have follwing characterstics: 1. icu=100% ics. 2. with positive isolation marked. 3. with adjustable short circuit and over load. 4. as per iec 60947 2. make of mccb l&t d sine / legrand dpx³ / schneider nsx / siemens 3vl. make of mcb ( 10ka c series. ) l&t u version / legrand dx³ / schneider acti / siemens. bill of material of main lt panel: 1 set of fabrication part of lt panel & busbar system, in crca sheet steel enclosure ( ip 42 / 43 ) without any components & its busbar system, in crca sheet steel enclosure without any components. name of panel builder : jmd electrotech, kokar, arnav poertech, tatisilway, tts systematix private ltd, tatisiway, meditron, meshra, ranchi or any approved panel builders of above make switch gears. indicating 1 sets multifunction meter having led display accuracy class 1 as per iec 62053 21, rs 485 port, ( ethernet / modbus ready suitable for monitoring and control with bms system ) in built rtc, aux supply: 44 277vac / dc. parameters: volts, amps, pf, thd, f, w, wh, va, vah, var, varh, runhrs, onhrs interrupts, thd for v&i per phase, individual harmonics for v&i upto 15th level complying with iec61557 12. min / max for eight parameters. sampling rate: 64 samples per cycle. make schneider / satec / siemnes 3 nos. ct of 300 / 5va 5 class one epoxy resin cast ct ( 3 nos. ) =1 set. make: kappa / matrix 3 sets phase indicating light shall be protected by 2 amps sp mcbs for incomer & outgoing.make l& t. / ae / schneider. incomer : 1 no. 250a fp / 25ka / mccb with adjustable thermomagnetic release type with s / c & o / l protection with front rotary handle and spreader links with on off trip indication. ( incoming cable size –1 run 120sq mm 3.5 core al. ar. cable ) . out going 7 nos. 63 a fp mcb 10ka c series . ( 3nos. for power db, 2 nos. as future use & 2 nos. as spare ) 4 nos. 32 a fp mcb 10ka c series . ( 4 nos. for cassette units and 1 no. as spare ) 5 nos. 25a fp mcb, 10ka c series . ( 3 nos. for ldb db, 1 nos. as spare ) 4 nos. 32a 10 ka, dp mcb c series 4 nos. 63a 10 ka, dp mcb c series total cost of lt. panel ( b ) feeder pillar panel ( canopy type ) : 88 supplying, designing, unloading, shifting to location, manufacturing installation, testing and commissioning in correct alignment position, effecting proper connection of all incomer and outgoing of double door canopy type feeder pillar panel for external lighting of 14 swg crca sheet ( 2 mm ) steel ip – 54 floor mounting cubical type lt panel in canopy shape suitable for operation on 415v, 50hz, 3 ph. ac supply and fault level 25 ka with front operated construction including separate fabrication arrangement for fixing m.c.c.b. the sheet steel under go minimum 7 tanks treatment followed by finishing powder coating of minimum 60 micron thickness duly compartmentalized with locking arrangement duly fixed on base channel size – 50 mm x 50 mm x 4 mm having accessories mounted inside the cubical panel, earthing with 2 nos. earth studs. the panel shall have type test certificates with short circuit and ip protection ( c.p.r.i. test ) . detail drawings and sld shall be provided at the time of work order. all openings shall be covered by soft rubber gasket, enclosure shall be galvanized. panel shall have suitable cable entry from bottom and suitable arrangement for multi runs aluminum cables for all mccb. the panel shall have type test certificates with short circuit and ip protection ( c.p.r.i. test ) aluminum bus bar for panel : bus bar shall be suitable for 100a, tpn busbar chamber of suitable length with ( e91ewp ) eletrolytic aluminum busbars. all busbars and interconnections shall be of suitable size aluminum busbar, current density of aluminum shall not be more than 0.8 amps / sq.mm cross sectional area of bus bar with removel gland plates, cable glands, at sending and receiving ends, encluding connections with outgoing feeders complete in all respect and all interconnections shall be made with 2.5, 4 and 6 sq.mm. pvc cu.wire. cost of enclosure with al bus bar, connection pvc wires, etc. the aluminium bus bar shall be with heat shrinkable pvc slived red, yellow, blue & black as ( ryb & n ) after temperature and incloser derating maximum allowable temp.of bus bar shall be 90 degree c. sld will be submitted by the contractor for approval to engineering incharge / consultant before submitting the apafcr panel drawing. based on approved sld, contractor will provide the ga drawing of external feeder pillar panel. inspection of the external feeder pillar panel shall be carried out at panel builders factory by the consultant before final delivery. 1 set of fabrication part of feeder pillar lt panel & busbar system, in crca sheet steel enclosure ( ip 42 / 43 ) without any components & its busbar system, in crca sheet steel enclosure without any components. name of panel builder : jmd electrotech, kokar, arnav poertech, tatisilway, tts systematix private ltd, tatisiway, meditron, meshra, ranchi or any approved panel builders of above make switch gears. the panel builder shall have type test certificates with short circuit and ip protection ( c.p.r.i. approved ) make of mccb l &t d shine. / legrand dpx³ / schneider nsx / siemens 3vl / equivallent in abb location : in campus bill of material in external feeder pillar panel : incomer: 1 no. 63a / fp / 25ka / mccb thermomagnetic release type with rotary handle & spreader links with on off trip indication. 3 set of ct 100 / 5va 5 class one epoxy resin cast ct ( 3 nos. ) =1 set. make matrix / kappa / l&t 1 set of analogue am meter ( 0 – 100a ) 96mmx96mm 4 position with selector switch for incomer. make l& t. / ae / schneider. make kaycee / l&t / schneider. 1 set of analogue voltmeter ( 0 – 500v ) 96mmx96mm with 4 position selector switch for incomer. make l& t. / ae / schneider. make kaycee / l&t / schneider. 3 sets of phase indicating light shall be protected by 2 amps sp mcbs for incomer.make l& t. / ae / schneider. out going 3 sets 25a / fp / 25ka / mccb adjustable thermomagnetic release type, and s / c , o / l protection, with rotary handle & spreader links. with on off trip indication. ( 2 no . for external lighting and 1 no. as spare ) 2 nos. 4 pole 25 a power contactor no nc of three phase of suitable rating. make: l&t / siemens / legrand 2 nos. single channel digital time switch. make: alpha rex 3 – cat no. ( d21 astro, 1 channel. ) 412654 2 nos. four pole two way lexic changeover with centre off 440v ac 32 to 40a to be used in case of timer failure to by pass the timer. ( legrand cat no. 604022 ) total cost of feeder pillar panel for external lighting copper cable for outdoor units 89 supply of following size of 1.1kv xlpe / pvc insulated / pvc sheathed ( heavy duty ) unarmoured electric cable with copper conductor as per is 7098 ( part 1 ) 1988 with upto date amendments. make: havells. polycab. kei, gloster. supply of 4 core 10 sq. mm. xlpe pvc cu. / unarmoured cable 1.1ar. cable telephone system accessories for matv network system 90 supply, erection, testing and commissioning of splitter / tap off mounted in suitable sizes ms boxes for matv system and shall be suitable for interactive system.two way ( s 2 ) 91 four way ( s 4 ) 92 two way tap off ( t2 ) 93 four way tap off ( t4 ) active components: l2 poe access switch 94 supply, fitting, fixing, connecting and testing of switch with 24 x 10 / 100 / 1000t poe ports and 4 x 100 / 1000x sfp ports, switching capacity 56gbps and forwarding rate 41.7mpps, switch should support poe and poe+ with 370w minimum power budget, operaating temperature 0°c to 50°c, switch should support link reccovery within 50ms for ring architecture, sdn or similar kind of technolgy should support, warranty 5 year from day 1 . make: cisco ws c2960x 24ps l / allied telesis at x230 28gp / hp / juniper ex2200 24p ) the above l2 managed data switch consists of the following: 1. power cord india, right angle. 2. both side cable connector. 3. 1 year free service pack. interface 24 x 10 / 100 / 1000t ports and 4 x 100 / 1000x sfp ports switching capacity / forwarding rate : 56gbps / 41.7mpps performance: up to 16k mac addresses, 256mb ddr sdram management: console port, gui, telnet, ssh, snmpv1, 2 and 3, powerful centralized management and zero touch device installation and recovery like sdn, security: console port, gui, telnet, ssh, snmpv1, 2 and 3, powerful centralized management and zero touch device installation and recovery like sdn, routing: ipv4 static routing and rip. fail over: switch capable of recovery within 50ms in a ring for application high availability ipv6: device management over ipv6 networks with snmpv6, telnetv6, sshv6 and syslogv6 diagnostic: optical digital diagnostics monitoring, automatic link flap detection and port shutdown, port and vlan mirroring ( rspan ) standard protocol: ieee 802.1q, ieee 802.1w, ieee 802.1s, ieee 802.1p, ieee 802.1ab, ieee 802.1ax, ieee 802.3ad operating temparature: 0°c to 50°c certification: en, ul and rohs warranty: 5 years. cost of l2 managed data switch fiber module 95 providing, fixing, connecting & testing of gigabit fiber module mm, support up to 550mtr ( make: cisco glc sx mmd / allied telesis at spsx / juniper ctp sfp 1ge sx / hp ) router / utm 96 supply, fitting, fixing and testing of utm / router with lan: 2 x 1000x sfp / 2 x 10 / 100 / 1000t rj 45 combo, wan: 2 x 1000x sfp / 2 x 10 / 100 / 1000t rj 45 combo , ha: 2 x 10 / 100 / 1000t rj 45, should support url filtering, dos and ddos attack detection and protection, antivirus, malware protection, static, dynamic ( bgp4, ospf, ripv1 / v2 ) , source based routing, policy based routing and igmpv1 / v2 / v3. warranty 5 year from day 1 ( cisco asa 5516 x with fire power services / allied telesis at ar3050s / juniper srx300 / hp ) the above router consists of the following: cisco 2901 ac power supply ( pwr 2901 ac ) ac power cord ( india, south africa ) , c13, bs 546, 1.8m blank faceplate for hwic slot on cisco isr cisco config pro express on router flash 512mb dram for cisco 2901 2921 isr ( default ) 256mb compact flash for cisco 1900, 2900, 3900 isr ip base license  for cisco 2901 2951 cisco 2901 2921 ios universal 2 port serial wan interface card security license  for cisco 2901 2951 1 year free service pack interface: lan: 2 x 1000x sfp / 2 x 10 / 100 / 1000t rj 45 combo wan: 2 x 1000x sfp / 2 x 10 / 100 / 1000t rj 45 combo ha: 2 x 10 / 100 / 1000t rj 45 processor and memory: 800mhz dual core, 1gb ( ram ) , 4gb ( flash ) firewall / utm ( unified threat manager ) : deep packet inspection, bandwidth limiting control for applications, bridging between lan and wan interfaces, data leakage prevention, url filtering, dos and ddos attack detection and protection, antivirus, malware protection, ( intrusion detection system ) , ips ( inclusion prevention system ) antivirous, anti spywire with 3 yrs subscription. this equipment will also protect & prevent outsider or visitors who are not assined in the existing network i, e office network system can not availed by any otsiders or they can not curropt the network system. ( for active & passive mode ) routing and multicasting: static, dynamic ( bgp4, ospf, ripv1 / v2 ) , source based routing, policy based routing and igmpv1 / v2 / v3 nat: static, ipsec traversal, dynamic napt. high availability: vrrp, vrrpv3 management & authentication: web based gui, industry standard cli, snmpv2 & v3, radius, tacacs+, internal user database, web authentication warranty: 5 years on hardware. cost of router / utm access point 97 supply, fitting, fixing, connecting and testing of wireless access point with ieee 802.11ac dual band radio and embedded antenna with 3x3 mimo, centrally controlled and managed by wlan, multiple ssid with vlan mapping, dynamic rf coverage optimization, warranty 5 year from day 1 ( make: cisco air ap1832i x k9 / allied telesis at tq4600 / juniper wla632 ) active components cctv 98 sitc of 8 port unmanaged network poe switch: l2, unmanaged, 8 100m poe port, 1 100m uplink port, 802.3af / at, poe power budget 123w make: cisco / allied telesis / hp aruba / juniper or as approved by architect. 99 sitc of 24 port unmanaged network poe switch: l2, unmanaged, 24 100m poe port, 1 100m uplink port, 802.3af / at, poe power budget 310w make: cisco / allied telesis / hp aruba / juniper or as approved by architect. 100 geyzer supply, fitting, fixing, installation & testing of water storage 15 liters geyser of bee 5 star rating vertical type acralic rust free body, facility of temperature control , with capillary themostat and thermal cut, isi certified heating element along with inlet & outlet connecting pipe, fixing clamps, fasteners, etc. as required. make: venus / bajaj / havells lt panel office supply, designing, unloading , shifting to location, manufacturing and effecting proper connection installation, testing and commissioning of all incomer and outgoing of lt panel fabricated out 2 mm ( 14 swg ) crca sheet steel dust, damp and vermin proof ( ip 42 ) free floor / wall standing factory built sheet steel enclosed modular construction extendable panel, suitable for operatrion on 415 + 10% volts, 50 hz ac 3 phase 4 wire system, hinged doors of 2mm thick crca sheet, duly painted ( powder coated ) complete with aluminium bus bars, interconnection with frls pvc copper wire, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per drawing and technical specifications attached etc. complete as required. the sheet steel under go minimum 7 tanks treatment followed by finishing of powder coating of minimum 60 micron thickness, duly compartmentalized having accessories mounted inside the cubical panel, earthing with 2 nos. earth studs. the panels shall be preferably arranged in multitier formation. these shall be of adequate size with a provision of 10 percent vacant space to accommodate future additional switch gear in addition to spare feeders presently provided. the size of the panel shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component do not attain temperature rise more than 40 degree celsius. location : corridor or suitable location the name plate for each feeder must be in anodized aluminium sheet. panel size as per drawing and shall be provided at the time of work order. al. bus bar the panel includes 415v, 250 a, 3ph, 25ka, 50hz electrolytic aluminium bus bar ( e91ewp ) aluminium earth bus with removable glands plates, cable glands at sending and receiving ends, including connection with outgoing feeders complete in all respects. the electrolytic aluminium bus bar of grade 63401 wp as per i:s 5082 of suitable length and insulated by heat shrinkable sleeves red, yellow, blue and black as r y b & n. the current density of bus bar shall be minimum 0.8 a / sq mm. minimum clearance between live parts / neutral to earth shall be 19mm. however clearances between terminals at components shall be as per applicable individual standard for components. interconnections between the main bus bars and individual units shall be made with 2.5, 4, 6 & 10 sq mm frls pvc cu. wire with 35 & 63mm 4 studs ( brass ) treminal blocks, aluminium bus bars of adequate rating. al. bus bar will be supported on insulators made of non hygroscopic, non inflammable material with tracking index equal to or more than that defined in bis contractor will provide shop drawing sld & ga drawing along with bom with cat. no. of each and every components and switch gears of lt panel for approval of consultant. inspection of the lt panel shall be carried out at panel builders factory by the consultant before final delivery for that all arrangements shall be made by the contractor. all 4 pole mccb with thermomagnetic based release must have follwing characterstics: 1. icu=100% ics. 2. with positive isolation marked. 3. with adjustable short circuit and over load. 4. as per iec 60947 2. make of mccb l&t d sine / legrand dpx³ / schneider nsx / siemens 3vl. make of mcb ( 10ka c series. ) l&t u version / legrand dx³ / schneider acti / siemens. bill of material of main lt panel: 1 set of fabrication part of lt panel & busbar system, in crca sheet steel enclosure ( ip 42 / 43 ) without any components & its busbar system, in crca sheet steel enclosure without any components. name of panel builder : jmd electrotech, kokar, arnav poertech, tatisilway, tts systematix private ltd, tatisiway, meditron, meshra, ranchi or any approved panel builders of above make switch gears. indicating 1 sets multifunction meter having led display accuracy class 1 as per iec 62053 21, rs 485 port, ( ethernet / modbus ready suitable for monitoring and control with bms system ) in built rtc, aux supply: 44 277vac / dc. parameters: volts, amps, pf, thd, f, w, wh, va, vah, var, varh, runhrs, onhrs interrupts, thd for v&i per phase, individual harmonics for v&i upto 15th level complying with iec61557 12. min / max for eight parameters. sampling rate: 64 samples per cycle. make schneider / satec / siemnes 3 nos. ct of 200 / 5va 5 class one epoxy resin cast ct ( 3 nos. ) =1 set. make: kappa / matrix 3 sets phase indicating light shall be protected by 2 amps sp mcbs for incomer & outgoing.make l& t. / ae / schneider. incomer : 1 no. 200a fp / 25ka / mccb with adjustable thermomagnetic release type with s / c & o / l protection with front rotary handle and spreader links with on off trip indication. ( incoming cable size –1 run 120sq mm 3.5 core al. ar. cable ) . out going without dg set 3 nos. 63 a fp mcb 10ka c series 4 nos. 25a / fp / 10ka / mcb c series 4 nos. 32a 10 ka, dp mcb c series 2 nos. 63a 10 ka, dp mcb c series total cost of lt. panel ( b ) matv, data networking system & cctv : ( part f ) telephone system data net working system passive component : ( data ) 101 providing, fixing, fitting, connecting and testing of white rj 45 cat 6 data outlet / toolless information outlets with white coloured rj 45 transparent shuttered modular scoket outlets with front plate. etl verified to meet or exceed tia / eia category 6 requirements, universal wiring label permitting to either t568a or t568b, ul listed, for computer networking complete in all respect suitable to fix in modular plate type switch system with connections as required. ( make: legrand arteor 573428 / scheinder zencelo / mk blenz ) 102 supplying, fitting, fixing, connecting and testing cat6 utp rj45 loaded patch panel & connector 24 port loaded 19 panel 1 u, panel: dc01 galvanised sheet steel, compliant with standards: iso / iec 11801 edition 3.0 cenelec en 50173 1 2007 ansi / eia / tia 568 c2 1 iec series 60603 7, nfc 20730, standard 8877 – 603.7, contacts: gold / nickel, thickness of gold > 0.8 μm minimum, equipped with rear cable guide to hold cable during maintenance, the connectors are connected from the front without a special tool. equipped with 4 cassettes of 6 rj45 cat. 6 connectors with toolless fast connection, marked 568 a / b, max. number of connections and disconnections: 5 without replacing the wire, endurance: 2500 operations ( plug in / pull out ) ik03, operating temperature: 40°c to +70°c ( make: legrand arteor 033760 / amps. / schneider. 103 supply fitting, fixing, and testing of blue / yellow color cat6 lcs2 u / utp 1 mtr ( 3.5 ft ) factory made lcs2 patch cord with boot factory crimped pvc, performance at 250mhz should be as per standards iec 61935 2 ed. 3.0 iso / iec 11801, usage temp – 20 to + 60°c, no of twists 500, no of insertions 750, 24 awg for rack end. ( make: legrand arteor 051772 / amp , cat#1859247 4 / schneider ) 104 supply fitting, fixing, and testing of blue / yellow cat 6 lcs2 u / utp 3 mtr ( 10 ft ) factory made lcs2 patch cord with boot factory crimped pvc, performance at 250mhz should be as per standards iec 61935 2 ed. 3.0 iso / iec 11801, usage temp – 20 to + 60°c, no of twists 500, no of insertions 750, 24 awg at end user side. ( make: legrand arteor 051774 / amp , cat#1859247 7 / schneider ) 105 providing, fixing, connecting and testing of modular of 6 port unloaded liu sc type. ( make : legrand.032100 / schneider / amp ) 106 providing, drawing, connecting and testing of 6 core unarmoured unitube multi mode om3 ofc ( fiber optics cable ) from wall mounted rack to server room rack, i, e rack to rack connectivity ) in existing heavy duty 25 mm pvc pipe.make make : legrand cat no 332021 / schneider / tyco. 107 providing, fixing, connecting & testing of blanking plate ( 6xrj45 blanking plate for 19 panel black ) . . ( make : legrand 032129 amp / schneider ) 108 providing, fixing, fitting, connecting and testing of sc pigtial 1 mtr 10 gb 9 / 125, mm make legrand.032241 / schneider / amp 109 providing, fixing, connecting and testing of of 3 duplex sm 9 / 125 sc adapter plate. ( make : legrand 032110 / schneider / amp 110 providing, fixing, fitting, connecting and testing of os1 / os2 sc / lc duplex patch cords 3 mtr, pc ( make : legrand.032605 / schneider / amp ) 111 providing, fixing, connecting & testing of splice tray 12 fiber capacity. : ( make : legrand ( lcs2 ) 032907 / amp / schneider ) ...

Uranium Corporation Of India Limited - Jharkhand

21121205 supply of material spare cards for accord make epabx system model adx 600 vdisa card, (voice disa card) (), do conf (conference card) () do cpu card (central processing unit card ), do dec card (digital extension card), do ec card (extension card) , do psu (power supply unit) , do tone card , do tie card (bridge card) , do trunk card (central office card,co card)...

Uranium Corporation Of India Limited - Jharkhand

20757924 supply of supply, retrofitting and commissioning of siemens article no. 6es7315 2ah14 0abo: simatic s7 300, cpu 315 2dp central processing unit with mpi integr. power supply 24v dc work memory 256 kb 2nd interface dp mater / slave micro memory card...

Indian Institute Of Technology - Jharkhand

20013080 supply and installation of mini array central processing unit (cpu). cpu control and storage system with 8 channel network ready digitizer, powered by poe ( quantity 10 no.) ...

Indian Institute Of Technology - Jharkhand

20013076 tender for supply and installation of mini array central processing unit (cpu). cpu control and storage system with 4 distributed, network connected, fully time synchronized 8 channel digitizers, powered by poe ( quantity 10 no.). ...

Indian Institute Of Technology - Jharkhand

19857354 supply and installation of mini array central processing unit (cpu). cpu control and storage system with 8 channel network ready digitizer, powered by poe ( quantity 10 no.)....

Indian Institute Of Technology - Jharkhand

19857353 supply & installation of mini array central processing unit (cpu). cpu control and storage system with 4 distributed, network connected, fully time synchronized 8 channel digitizers, powered by poe ( quantity 10 no.)....

Indian School of Mines - Jharkhand

19837778 supply and installation of mini array central processing unit ( cpu ) . cpu control and storage system with 4 distributed, network connected, fully time synchronized 8 channel digitizers, powered by poe ( quantity 10 no. ) ., agp prj 378 18 19=> open tender...

Indian School of Mines - Jharkhand

19835539 supply and installation of mini array central processing unit ( cpu ) . cpu control and storage system with 8 channel network ready digitizer, powered by poe ( quantity 10 no. ) ., agp prj 379 18 19=> limited....

District Collector - Jharkhand

13302291 supply of computer set , monitor , key board , mouse , cpu ( central processing unit ) , ups , printer cum scanner...