Military Engineer Services - Jharkhand

34972110 provision of medical store office at mh ramgarh 1 surface excavation notexceeding 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed. 2 add to (or deduct from) above itemno. 1 for every 3cm or part there of above or below 15 cm average depth complete all as specified and directed. 3 excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient forlaying cables/pipes,foundations,laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed. 4 returning, filling in including spreading, leveling, watering and well ramming in layers ofnot exceeding 25 cm thickafter the cables & pipes etc. are laid, jointed & testedand foundations complete all as specified and directed by engineer in charge. 5 removal of surplus excavated spoil not exceeding 50 mtr distance and depositing where directed by engineer in charge at a level not exceeding 1.5 m above the starting point complete all as specified. 6 m&l for plain cement concrete 1:4:8 type d 2(using 40 mm gradedcrushed stone aggregate) as in sub base of flooring, foundations,filling & mass concrete for fencing posts, foundation of pole ,struts & stay assembly etc complete all as specified and directed. 7 m&l reinforced cement concrete m 25 (design mix)(using20 mm gradedcrushedstoneaggregate)as in foundation including rafts, footings,plinth beams, and mass concreteetc.complete all as specified and directed.note : reinforcement & form work will be measured & paid seperately under respective item of boq. 8 m& lfor use & wasteof form work to sides of concrete foundation, base of coloumn ,rafts,footings, plinth beams, andplinth beamand similar work for rough finished flat surfaces of concrete complete all as specified and directed. 9 m&l reinforced cement concrete m 25 (design mix)(using20 mm gradedcrushedstoneaggregate)as incolumns,pillars,piers,popst and struts etc.complete all as specified and directed.note : reinforcement & form work will be measured & paid seperately under respective item of boq. 10 m& lfor use and waste of form work to sidesof columns,pillars,piers,post and struts for rough finished surface of concrete complete all as specified and directed. 11 m&l reinforced cement concrete m 25 (design mix)(using20 mm gradedcrushedstoneaggregate)as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and directed.note : reinforcement & form work will be measured & paid seperately under respective item of boq. 12 m&l reinforced cement concrete m 25 (design mix)(using20 mm gradedcrushedstoneaggregate)as in lintels beam, floor/roof beams, cantilevers, bressummers, ,etc complete all as specified and directed.note : reinforcement & form work will be measured & paid seperately under respective item of boq. 13 m&l reinforced cement concrete m 25 (design mix)(using20 mm gradedcrushedstoneaggregate)as in chajja etc complete all as specified and directed.note : reinforcement & form work will be measured & paid seperately under respective item of boq. 14 m& lfor use and waste of form work to sidesof soffit ofchajja,chullah hoods,troughs & similaritemsetc includingfor rough finished surface of concrete complete all as specified and directed. 15 m& lfor use and waste of form work to sidesofsoffit ofsuspended slab such as roof slab ,floor slab ,landing and similar work , not exceeding 200 mm thick for rough finished surface of concrete complete all as specified and directed. 16 m& lfor use and waste of form work to sidesandsoffit oflintel beam,floor/roof beams, etcfor rough finished surface of concrete complete all as specified and directed. 17 use and waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs and sides of rcc/ pcc bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide rough finished surface of concrete complete all as specified and directed. 18 m&l for brick work using fly ash bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed. 19 m&l for halfbrick thick brick work using fly ash bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 etc complete all as specified & directed. 20 m&l for with moorum/ red bajri fillingunder the floor not exceeding 100 mm thick spreaded, levelled and rammed including watering complete allas specified & directed . 21 m&l forpre constructionantitermite treatment for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete allas specified & directed . 22 m&l forpre constructionantitermite treatment for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of verticalsurface (area of the sub structure in contact with backfill to be measured) complete allas specified & directed . 23 m&l forpre constructionantitermite treatment for treating the the top surface of filledat the rate of5 litres of emulsion per square metre of surfacecomplete allas specified & directed . 24 m&l forpre constructionantitermite treatment for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete allas specified & directed . 25 s & f brass4 screw plate drawer pulls, plate with fixed dished pull; 80 mm to 100mmlong complete all as spcefied and directed 26 s & f solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with ms square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by engr in charge . 27 s & f for factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of ms tube for top and bottom rails. ms framed shall be covered with heat moulded plain colour pvc ‘c’ channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour pvc sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour pvc sheet to be fitted in the ms framed welded/sealed to stiles & rails with suitable pvc sheet beading & joined together with solvent cement complete all asfixing in the frame at site as per specification and drawing including 3 nos stainless steel butt hinges 100 mm long for each door, complete all as specified and as directed. 28 s&f 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed. 29 s & f 100mm sizebutt hinges medium weight cold rolled mild steel complete all as specified and directed . 30 s&f 150mm extruded aluminium alloy handles, cast type, anodisedcomplete all as specified& directed. 31 s&f 150mmaluminium alloy handles, cast type, anodisedcomplete all as specified& directed. 32 s&f of aluminium mortice lock,vertical type, size 75 mm four levers (isi marked) for aluminium doorscomplete all as specified and directed. 33 s&f 65 mm ,four lever brasslocks, drawer,grade i of size 65 mmcomplete all as specified and directed. 34 s&ffloor door stopper of aluminium alloy body& tounge,150 mm ,anodised with hard drawn steel spring fixed in floor complete all as specified and directed. 35 s&f brass4 screw drawer plate with fixed dished pull; 80 mm to 100mm longcomplete all as specified and directed. 36 s&ffloor double action spring hinges,brass with phosphor bronze wire spring, bright polished of size 100 mm complete all as specified and directed. 37 m & l for 18/19 mm thick prelaminated particle board exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timberframe work complete all as specified and directed. 38 s&f 40mm dia,brass ,cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. 39 s&fbrass handles 150mm size cast type ,polished brightcomplete all as specified and directed. 40 m&l for mild steel tmt bars 10mm dia and over grade fe 500, cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed. 41 m&l for mild steeltmt bars 08 mm dia and over grade fe 500 , asin stirrups, spacers & binders ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed. 42 m&l for hard core of broken stone or bouldergauge not exceeding 63mm deposited, spread & leveled in layers not exceeding15cm thick, watered and rammed to a true surface etccomplete all as specified& directed. 43 m & l for 75 mm thick plain cement concrete (1:3:6) mix, type c 1 (using 20mm graded crushedstone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 gradeand sand in the ratio 1:3 including necessary form work , complete all as specified and directed. 44 m & l joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces,complete all as specified and directed. 45 m & l glazed ceramic coloured tiles of size 375 mm x 250 mm x7mm/450 mmx 300 mm x7 mm thick,as in dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles including 10 mm thickrendering in cement plaster in cm (1:3), complete all as specified and directed. 46 m&l for vetrifieddark shed coloured ceramicfloor tiles10 mm thick (square/rectangular) area of each tileexceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement mortar (1:6) etc complete all as specified &directed. 47 m&l for vetrifieddark shed ceramic tiles 10 mm thick (square/rectangular) area of each tilenot exceeding 0.36 sqmon vertical surface such as skirting / dado etc ,set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over & including 10 mm thick backing coat in cement mortar (1:4) etc complete all as specified & directed. 48 m&l for rendering 10 mm thick on brick masonry/concrete surface etc in cm (1:6) surface finished even & smooth using extra cement complete all as specified and directed. 49 m&l for rendering 15 mm thick on other than fair face brick masonry/concrete surface etc in cm (1:4) surface finished even & smooth using extra cement complete all as specified and directed. 50 m & l for rendering 5 mm thick in cm 1:4 on concrete surfaces as in ceilingfinished even and faircomplete all as specified and directed. 51 m&l for preparation of newly plastered surfaceof wall and applying two coats of oil emulsion distemper over a coat of primer and a layer of putty (not less than 1.5 mm thick )complete all as specifiedand directed. 52 m&l for preparation of newly plastered surface of ceilingand applying two coats of oil emulsion distemper over a coat of primer and a layer of putty (not less than 1.5 mm thick )complete all as specifiedand directed. 53 m&l for preparation of newly plastered surfaceof externalwall andapplying two coatacrylicexterior emulsion paint of required shade over and including priming coat of exterior primer and a layer of putty (not less than 1.5 mm thick ) complete all as specifiedand directed. 54 s &f powder coated aluminium work for doors, windows, ventilators shutters(fixed/sliding track two or three track) and partitions frames with extruded built up standard sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions with sealent with wall, i.e. at top, bottom and sides including cleat angle,c.p. brass/ stainless steel screws, all complete all as specified and directed. 55 s&f powder coated aluminiumsliding door shutters (minimum thickness of powder coating 50 micron) , aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber packing anodised aluminium, snap beading screws, powder coated aluminium fittings such as peg stays 150mm long (1no.),100mm long hinges type b 21 (2nos), suitable handle(02 nos.) in each door top rail guide rail etc. complete all as specified and directed. 56 &f powder coated aluminiumwindow and ventilatorshutters (minimum thickness of powder coating 50 micron) ,fixed typewithout sash baraluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber packing anodised aluminium, snap beading screws, powder coated aluminium fittings complete all as specified and directed. 57 s&ffor anodised aluminium grillsfor windows and ventilatoraluminium sections (weightnot less than 2.25 kg/sqm) size4mmx4mm, 8mm thick and aperture not exeeding 80 mmx 80 mm width and including fixing with aluminium channel, 1 mm thick with steel screw and tintcomplete all as specified and as directed. 58 s&f 5.5 mm thick sheet glass not exceeding 0.5 sqm ineach pane of superior quality fixed to aluminium frame work with rubber neoprene beadingincluding solar control film 50 micron reflective type sticked to glasspanes as per instructions of manufacturers completeall as specified & directed. 59 s&f 4 mm thick figured glass pin headed type in squares/ rectangularnot exceeding 0.5 sqm ineach pane glazing with oil putty or aluminium frame/shutters with rubber neoprene beadingcomplete etc all as specified & directed. 60 s&f for gi water tubing mediumgrade, isi marked,galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chasees for brick wallsand making good the surface in cement mortar 1:3 complete all as specified & directed. 61 s&f for gi water tubing mediumgrade, isi marked,galvanised, 25 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls /laid in trenches and ceiling or laid in floors including cutting chasees for brick wallsand making good the surfacein cement mortar 1:3 complete all as specified & directed. 62 s&f rotational moulded polythene water storage tank of capacity 1000 ltrs (cylindrical/vertical with closed type), triple layer construction, isi marked, hoisted and fixed in position including 20 mm bore gi nipple and20 mm bore ball/ float valves high pressure of ptmt with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms)complete all as specified and directed. 63 s&f 20 mm borebrass ball/ float valves high pressure with polythene float & fly nutcomplete all as specified and directed. 64 s&f bib taps long body, cast copper alloy with capstan head or butter fly handle, chromium platedfancy type with long body shank, screwed down with high pressure screwed for iron pipe and fixed 15 mm bore complete all as specified &directed. 65 s&f fancy type angle stop valve fancy type chromium plated with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15 mm bore complete all as specified &directed. 66 s&f pillar taps fancy type, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered hot or cold with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed. 67 s&f for pvc connection 15 mm dia size with ptmt nuts of length 450 mmcomplete all as specified and directed. 68 s&f 75 mm bore pvc(swr) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or inwall complete all as specified and directed. 69 m&l for 75mm pvc (swr) floor trap, plain with grating including jointing with solvent cementwithchromium platedgratingwith or without hole complete all as specified and directed. 70 s & f600mm x 450 mm bevelled edge looking mirror of selected quality glass mounted on 6 mm thick pvc sheet with pvc frame and fixed to wooden plugs with cp brass screw and cup washers complete all as specified and directed. 71 s & f pvc flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float and handle, pvc flush pipe 32 mm bore & pvc connection 15 mm bore 450 mm long with ptmt nuts and brackets complete set all as specified anddirected. 72 s & f vitreous china wash basin, any colour, flat back size 550 mm x 400mm including 32mm brass chromium platedwaste coupling ,pvc 32 mm bore waste pipe, chromium plated gratingincluding bracket complete all as specified and directed. 73 m&l for pcc 1:2:4 type b 1 (using 20mm graded crushed stone aggregates) in kerbs or mud stops, rounded or chamfered on edges water troughs and the like including necessary form workcomplete all as specified and directed. 74 m & l for 15 mm thick screed bed in cement mortar 1:4 mixedwith usingliquid water proofing compoundas per manufacturers instructionsover roof top surface finished even and smooth using extra cement and application of water proofing treatment using app modified roof membrane over existing non accessible/non approachablercc roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed : (a) cleaning existing surface properly.(b) applying approved bituminousbased primer @ 0.30 litre / sqm manufactured by the same agency as that of app membrane with a density 0.87 0.89 kg per liter at 25 degree centigrade on prepared surface &hot blown grade bitumin85/25 @ 1.2 kg/sqm over primer .(c) laying not less than 3mm thick app modified water proofing membrane weighing not less than 3.00 kg/sqm reinforced with non woven polyster fiber weight not less than 160gsm/sqm using butane torch by torch application with 10cm side laps and 15cm end lap. physical property of membrane shall be as under : (i) membrane weight not less than 3.00 kg/sqm. (ii)non woven polyester weight not less than 160 gsm/sqm.(iii)softening point of membrane not less than 150degree celsius. (iv)joint tensile strength longitudinal not less than 650 kg / sqcm and transverse not less than 450 kg /sq.cm at230 degree celsius. (v) tear strength longitudinal not less than 300 n& transverse not less than 250n.(vi)elongation of reinforcement not less than 30%.(vii) impermeability under water pressure not less than 3 kg/sqcm.(d) app membrane shall be laid using butane torch by torch application with minimum 10cm side overlap and 15cm end lap. (e) applying two coat of bituminiousbased aluminium paint @ 0.3 kg /sqm over app membrane.(note:water proofing compound shall be measured and paid seprerately under respective item of boq) 75 supply only liquid water proofing compound complete all as specified and directed. 76 m&l for 60mm thick factory mademachine pressed pre cast concrete coloured interlocking paver blockof approved shade of any shape and size conforming to is 15658 2006 of m 35 grade laid over &including cleaned dry sand cushion bed 50mm thick over &including 100 mm thick pcc 1:4:8 type d 2 (using 40mm graded crushed stone aggregate) assub base, surface finished even and rough over and including 75mm thick hardcore of broken boulder of gauge n exc. 63mm, deposited, spread and levelled, watered and rammed to a true surface, etc complete all as specified and directed. 77 m & l for 100 mm thick concrete bed to 150 mm bore drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type d 2 (using 40 mm gradedcrushed stone aggregate ) complete all as specified & directed. 78 m & l for 150 mm bore (internal dia )reinforced concrete drain pipe ,class np 3, laid and jointedin trenches complete all as specified & directed. 79 m&l for plain cement concrete 1:3:6 type c 2(using 40 mm gradedcrushed stone aggregate) as in foundations, bed of manhole ,filling & mass concrete etc complete all as specified and directed. 80 m&l for plain cement concrete 1:2:4, type b 1 (using 20 mm graded crushed stone aggregates) as in surface channels /benching of manhole ,drain ,laid to shape and slopeand surface finished even & smooth using extra cement complete all as specified and directed 81 s& f 25 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed 82 m&l for drilling in existing water pipe, taking new tapping from existing pipe,proper welding to the pipe surface complete all as specified and directed 83 s& f towel ring of ptmt fixed with and including chromium plated brassscrews and wooden/plasticcleats (minimum weight 90 gms) complete all as specified and directed 84 s&f vitreous china wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat coverincluding connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device complete all as specified and directed. note : plastic seat cover shall be measured separately as supply only as considered under respective items. 85 supply only plasticwater closet seat cover,black,closed pattern with flat bottom and mild steelchromium plated or aluminium hinging device complete all as specified and directed. 86 s & f health faucets ,abs body with 1.0 mtr longeasy flex tube inchrome finish and wall hook complete all as specified and directed. 87 s & f chromium plated toilet paper holder fixed to walls complete all as specified and directed. 88 m&l for point wiring for one light/fan/exhaust fan point /exhaust fan/ bell /buzzer pointcontrolled by one way switch with using with frlsh pvc insulated pvc unsheathed electric cable conforming to is:694, 1100v grade ac, single core having multi stranded copper conductor of size 1.5 sq.mm nominal cross sectional area for phase & neutralandincluding non metallic rigid pvc conduit isi marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system & 1.5 sqmm green pvc insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including sunken type anodized pressed steelsheet terminal boxmade out of 1.6mm thick of suitable size, for mounting fittings/junction boxes including wooden board with bakelite sheet 2.8 mm thick laminatedcover make sheet for housing/fixing switches etc., complete all as specified and directed. note: proper colour coding to be adopted. 89 all as per item no. 88 here in before but 5 amp socket outlet on same board. 90 all as per item no. 88 here in before butfor 5 amp switch socketon independent board. 91 m&l for point wiring with frlsh pvc insulated pvc sheathed electric cable confirming to is:694, 1100v grade ac, single core having multi stranded copper conductor of size 2.50 sq.mm nominal cross sectional area for phase & neutral& including non metallic rigid pvc conduit isi marked medium grade not less than 25 mm dia with all conduit accessories in concealed wiring system & 2.50 sq.mm green pvc insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including pressed steelanodized sunken boxes 60 mm deep & 1.6 mm thick duly painted inside & anticorrosive outside with bakelite hylem sheet 2.80 mm thick complete for one six pin switch socket outlet combination ,15 amps & 5 amp socket point on independent board controlled by one ,one way switch complete all as specified and directed. 92 s & f switch piano flush button single pole one way 5 amp, complete all as specified and as directed. 93 s & f socket outlet 2 in 1, 3 pin, 5amp, flush type, universal, complete all as specified. 94 s & f switch socket combination 2 in 1, 3 pin, 5amp and 15 amp flush type, universal, complete all as specified. 95 s & f switch socket combination 2 in 1, 3 pin, 5 amp, flush type, universal, complete all as specified. 96 supply and fix ceiling rose three terminals pvc/ polycarbonate, isolated body complete all as specified. 97 s & f lamp holder, pvc/polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (isi marked), complete all as specified. 98 s & f bell push type single pole one way 5 amps, complete all as specified. 99 s & f bell electric ding dong ac 230 volts single pole complete all as specified. 100 s & f ceiling rose three terminals pvc/ polycarbonate, isolated body complete all as specified. 101 s&f five stepped type electronic fan regulator flush type controlled 230 v, , 120 watt etc complete all as specified and directed. 102 s&f for ceiling fans complete with blades, down rods, and accessories, 230 v, 1200 mm sweep. min air dilivery 210 cfm with service value 6.00 bee. five star rated with brushless direct current motor (bldc) including connecting up with three core flexible copper conductor cable suitable sizefrom ceiling rose to fan terminal with necessary accessoriescomplete all as specified and directed. 103 s & f led light fitting 1 x 20watt , 220 v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting, complete all as specified and as directed by engr in charge.make: havells/bajaj/crompton greaves/phillips. 104 s & f led bulb of capacity 10 watt , lumen out put (950)lm ,length 102 mm dia56 mm , base cap b22 (isi mark) complete all as specified and as directed by engr in charge.make: havells/bajaj/crompton greaves/phillips. 105 s & f plastic body exhaust fan of 250 mm sweep with louvers shutter,single phase ,230 v,50 hz,1200 rpmac ,copper winding , including provision of hole, mounting frame, nut, bolts, washer, fasteners etc and connecting exhaust fan to ceiling rose including provision of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection complete all as specified & directed. 106 s & f sheet metal enclosures for dbs when mcbs to used single pole and neutral (spn) double door 240 volts, 8 way with ip 43 ik 09 protection including 200 amp bus bar and neutral link (isi marked), complete all as specified and as directed. 107 s & famp rating 240v, 10 ka c curve miniature circuit breaker (mcb) of single poles and neutral and current carrying capacity 32 amp in the mcb db complete with connection testing and commissioning all as specified and as directed. make: indoasian or its equivalent make in havells/standard/l&t. 108 s & f240v, 10 ka c curve miniature circuit breaker (mcb) of single polesand current carrying capacity 5 to 32 amp in the mcb db complete with connection testing and commissioning all as specified and as directed.make: indoasian or its equivalent make in havells/standard/l&t. 109 m & lsub main wiring two single core 6.0 sqmm pvc insulated frlsh multistanderd copper conductor cable and one run of 6.0 sqmmpvc insulated unsheathedfrlsh multi stranded copper conductor cablefor earth wire drawnin & including concealed rigid non metallic pvc conduit medium grade with fittings (isi marked) not less than 25 mm dia, complete and making good disturbed surface wall complete all as specified and as directed. note : 2 runs of 6.0 sqmm cable and 1 run of earth wire 6.0 sqmm shall be measured as one unit length. 110 supply, laying , jointing & testing lt under ground cablexlpe insulated, screened ,pvc bedded, galvanised steel strip or wire armoured, electric power cable ( heavy duty) with standard aluminium conductor , 1100 voltsgrade of cross sectional area 16 sq mm 2.0 core complete all as specified and directed. 111 material & labour for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed by engineer in charge.note: for measurement purpose punned thickness shall beconsidered as per clause 19.75 of ssr part i. 112 supplying & laying un reinforced pre cast flat concrete cable protection cover of class lv, type 2, size 250 mm x 150mm x 40mm, factory made, complete all as specified and directed by the engineer in charge. 113 s & f 25 mm bore gi tube, light grade for cable protection with all necessary fitting, complete with all fittings laid as in floor etc., complete all as specified and as directed. 114 m&l ,for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by gi pipe 15 mm bore (light grade) and watering pipe 20 mm bore gi pipe (light grade) and pcc of chamber and coping shall in 1:3:6 type c 1 using 20 mm graded stone aggregateincluding excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate no 3 of ssr pt i, 2009 with ci cover 10mm thick of size 300x300mm with charcoal dust and common salt complete and earth lead connected to panel including testing complete all as specified and directed. note : earth test result should not less than one ohm. 115 m&l for boring ofhole under road, pavement, hard standing without disturbing existing surface by trenchless technology using ultra sound technique and necessary machine with & including provision of 50 mm borelight grade gi pipefor protection of cable complete all as specified and directed by engineer in charge.note : pipes shall be laid minimum 2.00 mtr below/under existing road surfaces/taxi track / apron /floors etc. 116 cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type b 1 smooth finished, and reforming benching as required in 150mm internal diapipe complete all as specified and as directed. ...

South Eastern Railways - Jharkhand

34826070 auction sale of ( 1 ) traction mast and portal. qty 23 nos. i.e. 5000.00 kg [ ferrous ] . ( location 426 / 2 =04 nos, 424 / 19, 21, 23=09 nos, 415 / 32, 24=02 nos, 412 / 12, 24 26=02 nos, 402 / 24, 26=02 nos, 395 / 14 16=04 nos ) ( 2 ) s.s. wire rope. qty 25 nos. i.e. 65.00 kg. [ ferrous ] . ( 3 ) ball bearing. qty 300 nos. i.e. 54.00 kg [ ferrous ] . ( 4 ) cantilever assembly. qty 15 nos. i.e. 180.00 kg. [ ferrous ] . ( 5 ) guy rod cut. qty 25.00 nos. i.e. 750.00 kg [ ferrous ] . ( 6 ) ferrous scrap. qty 500.00 kg. [ ferrous ] . total qty 6549.00 kg [ ferrous ] . us and scrap....

Department Of Education - Jharkhand

34624701 bids are invited for product ( q3 ) total quantity : 101 bench with chair: dual desk for students having overall top size:42”l x 18” d x 30” h with pre laminated board top, seat and back. front ofthe desk covered with 9” perforated sheet with a shelf for keeping books 784 02 table size : 1200lx 600dx 750ht. 25mm thk. pre lam tabletop with pvc edge banding. table top supported with 18mm thk prelam side panel.· 18mm thk. prelam partical board modesty panel.· mobile pedestal unit 400lx450wx600ht.· pvc keyboard tray &metal cpu trolly. 73 03 chair medium back chair staff chair size: (w)490mmx (d)485mm x (h)1025mm medium back chair/revolving/push back mechanism/pp fixed arms/nylon base. 140 04 wardrobe size: 1200lx500dx1950ht. storage will made of 18 mm thk prelaminated particle with pvc edge banding (matching to prelam). units with open able shutters, shelves, handles, levelers &lock. 98 05 blackboard 18 06 big table size :2400lx12000dx750ht . 25mm thk. pre lam table top with pvc edge banding. tabletopsupportedwith18mmthkprelamsidepanel.·18mm thk prelam particle board modesty panel. 07 single bed without storage bed size :1985lx 900dx 945ht. supplying and placing in position of beds. construction of bed shall be knock down type in nature. beds head board, tail board & sides should be made out of18mm minimum thick pre laminated particle board, mattress panel also made out of minimum 18mm thick pre laminated particle board, all exposed edges to be provided with 2.0 mm thick matching grain pvc lapping fixed with hot melt glue. 01 08 excutive table directors table main table size: (l)2300mm x (d)900mm x (h)750mm side unit: 1800(l)x450(d)x670(h)supplying, and placing in position of a straight line table with two wire manager as per photograph. themaindeskofshallbemadeoutof36mmthickpre laminated particle board with the approved shade. table top supported with side panel sand modesty panel. the side panels made out of 36mmthick pre laminated particle board of approved shade. all working or non working edges shall be provided with machine pressed2mm thick pvc edging using special hot melt glue at hot temperature. provision of flip up cable manager box in the table and one fixed pedestal unit with a combination of 2 drawers. the pedestal storage unit shall be made of 18mm thick prelaminated particle board with provision of handles & central locking arrangement. the fixed side runner with the table shall make the table of having aprovision for three drawer with locking facility,one open shelf ,two openable shutters with lock. the product should be from bifma certified company. 01 09 excutive chair high back revolving chair size:(w)595mmx(d)505mmx(h)1280mm high back chair / revolving / gas height adjustment/center tilting with single locking mechanism/armrest with p.u padding / chrome plated base 10 visitor chair size: (w)570mmx(d)500mm x(h)940mm multipurpose fixed cantilever frame in chrome finish legs|leatherite finish 04 11 computer: all in one desktops computer 10th generation intel® core™ i5 processor windows 10 pro 54.6 cm (21.5) diagonal full hd display intel® uhd graphics 1 tb 7200 rpm hdd 8 gb ddr4 2666 sdram 5.7 kg 58 12 table for office overall size 1370w x 680d x 750h , top 18mm thick plpb board approved laminate shadewith2mmthickpvcedgebending,understructure1300wx540dx725hmadeofprimequality crca 25 x 25x 1mm 20 ( gauge ) square metal pipe duly powder coated , understructurecrcasquaremetalpipe25x25mmwith1mm(20gauge)thickfoursideweldedwithvert icallymetalpipe&7tanktreatmentwithminimum45 50micronpowdercoating,metal1ststorage(3d)&other2ndstorage(1s)madeofprimequality0.6mmth ickcrcametalsheettanktreatmentwithminimum45 50micronpowdercoatingwithlockingfacility , metal frames rectangular pipe & square metal pipe closed with pvc caps , legs of the table hard rubber shoes , all metal pieces shall be welded properly strongly and conformity with regulations with co2 welding shall be used , metal shall be coated after being treated with at least three stages cleaned from oil , grease , dust and other dirt using special thermal control coating for metal furniture to formal layer of base coating of ( iron phosphating) (0.4– 0.8) gm/m² automatic spray coating shall be applied to be followed by a drying process in a thermal furnace with suitable temperature and time for the process. 10 13 chair for office medium back revolving chair((1100 x450 x460 mm) having 12 mm ply in seat , back nated, chair having central tilt mechanism with locking lever ,steel inserted fiber base with five twin caster wheel, pp arm rest attached with seat. backbone supporter, abs covering at seat and back. upholstery: fabric. 10 14 table size :1500lx600dx750ht. size :900lx450dx750ht. 25mm thk. prelam tabletop with pvc edge banding.· table top supported with 18mm thk prelam side panel.·18mm thk prelam partical board modesty panel.· mobile pedatstal unit 400lx450wx600ht.· pvc keyboard tray &metal cpu trolly. side runner· 25mmthk.prelam table top with pvc edge banding. storage will made of 18mm thk prelaminated. units with sliding shutters, shelves, handles, levellers &lock. 02 15 sofa with table: sofa (3 seater sofa set) 1745w x 770d x 760h (1seater sofa set) 750w x 770d x 760h frame construction kiln seasoned mixed meranti solid tropical hard wood seats webbing 3 diagonal pattern wedding foam 32 density soft foam used for comfortable seats and 32 density hard foam used for back rest upholstery semi pvc with nylon bonded thread stitching 5legs are made u 16 display wardrobe mode of supplyknocked down to be assembled at consignee site by the seller type of bookcasefree standing design of bookcaseopenable doors with glass panel material use for top/bottom/back/sidesflat single layer mdf board of grade sbg ii of is 12406/latest material for door panelteak wood material for shelvesprelaminated particle board thickness of top19 millimeter thickness of bottom19 millimeter thickness of back18 millimeter thickness of sides18 millimeter thickness of shelves18 millimeter height of bookcase ±20 mm1800 millimeter width of bookcase ± 20 mm915 millimeter depth of bookcase ± 10 mm400 millimeter 02 17 recption counter size:2400x650x1065mm25mm thk pre lam table top with pvcedge banding. 18mm thl pre lam sidepanel, 10mm thk frosted glasscounter top with s.s.stud. mobilepedestal 400x450x600ht., m.s powdercoatedlegs,m.sperforatedpowder coatedmodestypanel. 01 18 table office working table of sizes (lxwxh) 1200 mm x 650 mm x 750 mm. table top material and thickness shall be 18 mm thick prelaminated particle board with edges covered with 0.8mm pvc edge band, with one side & three storage plus gable end and modesty panel material and thickness made of 18mm thick pre laminated board with edges covered with 0.8mm pvc edge band. storage unit h 525mm x w 400mm x d 485mm. the storage unit shall be made of 18mm pre laminated board in the same shade as of table top, shoes material superior quality rubber shoes are to be provided with handles material corrosion resistance metal. 48 19 projector: technology one chip dlp native resolution800 x 600 (svga) brightness (lumens)3800 optical zoom yes if yes, optical zoom (%)110 if yes, type of projector standard throw (0.91 to 2.5) type of light source uhp / uhe / uhm minimum life of light source (in normal mode) (hours)4000 on site oem warranty for light source (time or life in hours whichever is earlier)1 year or 1000 hrs. on site oem warranty 2 projector distance:22. 24.24 26 projector method: front of scene...

Department Of Heavy Industry - Jharkhand

34583516 bids are invited for cable trench material ntpc north karanpura trench material bolted assembly vertical support single channel c1 of length 750mm , trench material bolted assembly vertical support single channel c1 of length 450mm , trench mat bolted assembly horizontal support cantilever arm ca1 of length 750mm alongwith necessary base plate, bolts nuts with springs washer etc required for fixing on vertical support channel , trench mat bolted assembly horizontal support cantilever arm ca1 of lnth 620mm along with necessary base plate bolt nut with long spring washer etc required for fixing on vertical support channel , trench material bolted assembly horizontal support cantilever arm ca3 of length 320mm alongwith necessary base plate bolts nuts with springs washer etc required for fixing on vertical support channel , trench material bolted assembly clamp cc1 suitable for single channel for fixing vertical support channel c1 alongwith necessary anchor rawl bolts spring nuts washer et total quantity : 5177...

Ministry Of Road Transport And Highways - Jharkhand

34559865 bids are invited for furniture procurement nhai ramgarh quantity : 33 1 item number 1 godrej interio impress main desk 2400w with eru and pedestal.the main table shall be of size 2400 width mm x 1050 mm depth x 750 mm height. top surface of the table shall made up of mdf ( medium density fibre ) board duly finished with veneer and final coating of pu. the main desk should contain in built key board pull out tray for keeping keyboard of computer. the front modesty panel of the table shall be made up of mdf board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with veener and pu coating. for personal storage one mobile pedestal ( 3 drawer unit ) shall be provided of size 510 mm width x 635 mm height and 445 mm depth. the storage pedestal shall also be made up of mdf duly finished with veener & final coating of pu. the side shall be of size 1200mm width x 445mm depth x 660 mm height. the side unit shall be made up of mdf board duly finshed with veneer and final finish by pu coating. the design of the side unit shall be such that it can be placed on either side of the main table. the side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. the thickness of the top of the side unit shall be 25mm.the manufacturer / oem should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001 from nabcb accredited agency. bidder / oem should have bifma membership certificate, greenguard by ul certified product in its product portfolio as applicable and aiota certificate. data sheet and product test reports should be submitted in the technical bid. 2 item number 2 godrej interio halo very high back chair.1. seat / back assembly: the seat should be made up of 1.2 ± 0.1cm. thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. the back foam should be designed with contoured lumber support for extra comfort.back size: 53.0cm. ( w ) x 95.4cm. ( h ) seat size:54.6cm. ( w ) x 49.0cm. ( d ) 2. high resilience ( hr ) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 + / 2 kg / m³ and hardness load 16 ± 2 kgf for 25% compression.3. seat back connecting spine:the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thk hr steel and should be black powder coated ( dft 40 60 microns ) .4. armrest assy: the armrest assy. should comprise of three parts viz. the armrest support tube and p.u. armrest and the armrest top. the armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s. e.r.w. support tubes and chrome plated. the p.u. armrest should be made of black integral skin polyurethane with 50 70 shore a hardness and reinforced with m.s. insert. the armrest top should be made of abs & upholstered with foam & leather.5. front pivot synchro tilt mech.: the mechanism should be designed with the following features:•360° revolving type.•seat back tilting ratio of 1 : 1.5.•front pivot for tilt with feet resting on ground ensuring more comfort.•tilt tension adjustment.•5 position locking with anti shock back mechanism, which prevents the backrest from impacting the user when the lock should be released.•static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking.6.pneumatic height adjustment: it has an adjustment stroke of 9.0 ± 0.3cm.7. blow moulded bellow : the bellow should be 1 piece and blow moulded in black polypropylene.8. pedestal assy: the pedestal should be made of die cast aluminium with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch center dia. ( 77.0 ± 1.0cm with castors ) . 9. twin wheel castors: the twin wheel castors should be injection moulded in black nylon.the manufacturer / oem should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001 from nabcb accredited agency. bidder / oem should have bifma membership certificate, greenguard by ul certified product in its product portfolio as applicable and aiota certificate. data sheet and product test reports should be submitted in the technical bid. 3 item number 3 godrej interio la sede visitor chair.1 ) seat / back assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with pure leather and moulded high resilience ( hr ) polyurethane foam of density 45±2 kg / m3, and hardness load 16 ± 2 kgf for 25% compression.the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with pure leather.seat size : 47.6 cm. ( w ) x 49.2 cm. ( d ) back size : 46.5 cm. ( w ) x 59.5 cm. ( d ) 3 ) visitor tubular frame: the tubular frame should be cantilever type and made of ø2.54± 0.03 cm x 0.02 ± 0.016cm thick ss 202 tube. the back should be connected to frame through chrome plated high pressure die case connector piece.the manufacturer / oem should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001 from nabcb accredited agency. bidder / oem should have bifma membership certificate, greenguard by ul certified product in its product portfolio as applicable and aiota certificate. data sheet and product test reports should be submitted in the technical bid. 4 item number 4 godrej interio storwel plain.storwel plain shall have an overall size of 916mm ( w ) x486mm ( d ) x1980mm ( h ) with welded construction. it should have the shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm ( high yield strength ) and all other components shall have a thickness of 0.9mm. these components shall be made of crca ‘d’ grade high yield strength as per is:513. the storwel plain should have a mazak handle and three way locking mechanism with shooting bolts. it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns ( + / 10 ) . plenty of colour options and shelving options shall be available.the manufacturer / oem should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001 from nabcb accredited agency. bidder / oem should have bifma membership certificate, greenguard by ul certified product in its product portfolio as applicable and aiota certificate. data sheet and product test reports should be submitted in the technical bid. 5 item number 5 godrej interio orlando p3 seater sofa.overall dimensions of the 3 seater sofa shall be width 1820mm, depth 920mm , height 890mm, seat height 470mm. leather thickness shall be 0.9 1.1 mm and pvc thickness shall be 0.9 mm. the seating foam shall have a thickness of 100mm and density of 32 kg / m3the manufacturer / oem should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001 from nabcb accredited agency. bidder / oem should have bifma membership certificate, greenguard by ul certified product in its product portfolio as applicable and aiota certificate. data sheet and product test reports should be submitted in the technical bid. 6 item number 6 godrej interio orlando p single seater sofa.overall dimensions of the 3 seater sofa shall be width 920mm, depth 920mm , height 890mm, seat height 470mm. leather thickness shall be 0.9 1.1 mm and pvc thickness shall be 0.9 mm. the seating foam shall have a thickness of 100mm and density of 32 kg / m3.the manufacturer / oem should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001 from nabcb accredited agency. bidder / oem should have bifma membership certificate, greenguard by ul certified product in its product portfolio as applicable and aiota certificate. data sheet and product test reports should be submitted in the technical bid. 7 item number 7 godrej interio bloom coffee table.overall size : w x d x h 1000 x 600 x 430mm.1.understructure: legs, top wooden frame & bottom tie members are made out of first qualityrubber wood without knots & defects on all faces. bottom tray is made of 1.2mm thick mssheet. metal brackets are used for assembly purpose.2. top: 8mm thick toughened glass.3. construction: knock down assembly.4. finish: bloom_coffee table is in two colour finish option ÿoption 1 : natural finishÿoption 2 : walnut finishwooden members are pu painted with hardness 2h.metal components are powder coated.bottom ms metal tray is having floral pattern laser cut.top glass is having sand blasted floral pattern on bottom surface.5. hardware: knockdown assembly with high quality standard hardware like screws, metalinserts, wooden dowel, plastic leg bush etc..the manufacturer / oem should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001 from nabcb accredited agency. bidder / oem should have bifma membership certificate, greenguard by ul certified product in its product portfolio as applicable and aiota certificate. data sheet and product test reports should be submitted in the technical bid. 8 item number 8 godrej multiflex shelving system 6 ( height ) x 3 ( width ) x depth ( 18 ) with 6 panels.overall dimensions of the rack is 6 ( height ) x 3 ( width ) x depth ( 18 ) with 6 panels.load bearing members of the system are made out of high strength hr steel having properties equivalent to grades specified by is 5986:2002 / is 2062:2006.in addition to high strength, the raw material used for structural load bearing members posses adequate ductility to ensure toughness. the material also has the necessary impact strength for cold room applications up to 30 deg c. all fasteners used are of grade 8.8.these are with galvanized finish to suit industrial atmosphere.for long life and protection from corrosion, all powder coated components are given a thorough antirust treatment. the dry film thickness ( dft ) after powder coating would be average 35 microns.all powder coated components are subjected to an elaborate 4 step, six zone anti corrosion treatment, viz. de greasing as per is 6005:1970, rinsing, phospating as per is 3618:1966 and ro water rinsing.complete knock down construction. the racks are grouted on floor using expansion bolts.the manufacturer / oem should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001 from nabcb accredited agency. bidder / oem should have bifma membership certificate, greenguard by ul certified product in its product portfolio as applicable and aiota certificate. data sheet and product test reports should be submitted in the technical bid. 9 item number 9 godrej interio enterprise 1500w with cpu hanger.enterprise 1500 table with cpu hanger size shall be 1500 width mm x 750 depth mm x 728 height mm . top shall be 18 mm thick pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick pvc edgebanding. understructure modesty panel 18 mm thick pre laminated particle board . the rectangular frame shall be fabricated component in 1.2 mm thick crca , finish : powder coat ( epoxy polyster ) . leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick ms erw atube , finish powder coat ( epoxy polyster ) .the plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & ms bolt. the storage shall be having shell and drawer tray 0.6 mm thick crca finish powder coat ( epoxy polyster ) plus the drawer front shall be 0.8 mm thick crca finish powder coat ( epoxy polyster ) plus lock with 10 lever and handle and leveller. the wire management shall be horizontal wire carrier 0.7 mm thick crca finish powder coat ( epoxy polyster ) and vertical wire carrier 0.8 mm thick crca finish powder coat ( epoxy polyster ) .the manufacturer / oem should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001 from nabcb accredited agency. bidder / oem should have bifma membership certificate, greenguard by ul certified product in its product portfolio as applicable and aiota certificate. data sheet and product test reports should be submitted in the technical bid. 10 item number 10 godrej interio enterprise 1500w without cpu hanger.enterprise 1500 table without cpu hanger size shall be 1500 width mm x 750 depth mm x 728 height mm . top shall be 18 mm thick pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick pvc edgebanding. understructure modesty panel 18 mm thick pre laminated particle board . the rectangular frame shall be fabricated component in 1.2 mm thick crca , finish : powder coat ( epoxy polyster ) . leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick ms erw atube , finish powder coat ( epoxy polyster ) .the plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & ms bolt. the storage shall be having shell and drawer tray 0.6 mm thick crca finish powder coat ( epoxy polyster ) plus the drawer front shall be 0.8 mm thick crca finish powder coat ( epoxy polyster ) plus lock with 10 lever and handle and leveller. the wire management shall be horizontal wire carrier 0.7 mm thick crca finish powder coat ( epoxy polyster ) and vertical wire carrier 0.8 mm thick crca finish powder coat ( epoxy polyster ) . the manufacturer / oem should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001 from nabcb accredited agency. bidder / oem should have bifma membership certificate, greenguard by ul certified product in its product portfolio as applicable and aiota certificate. data sheet and product test reports should be submitted in the technical bid. 11 item number 11 godrej interio bravo mid back chair.1.seat / back assembly: the seat and back should be made up of 1.2 ±0.1cm. thick hotpressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area.back size 47.5 cm. ( w ) x58.0 cm ( h ) seat size 47.0 cm. ( w ) x 48.0 cm. ( d ) 2.. high resilience ( hr ) polyurethane foam: the hr polyurethane foam should be moulded with density = 45±2 kg / m3 and hardness load 16 ± 2 kgf for 25% compression. 3. armrests :the one piece armrests should be injection moulded from black co polymer polypropylene. 4. center tilt synchro mechanism: the mechanism should be designed with the following features: • 360° revolving type. • upright position locking • tilt tension adjustment • seat / back tilting ratio of 1:3. 5.pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm.6.telescopic bellow assemblythe bellow should be 3 piece telescopic type and injection moulded in black polypropylene.7.pedestal assembly:the pedestal should be injection moulded in black 33% glass filled nythe manufacturing company should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001, bifma membership certificate, greenguard by ul certificate as applicable, aiota certificate, data sheet and product test reports.lon 66 and fitted with 5 nos. twin wheel castors. the pedestal should be 66.3 ±0.5cm. pitch center dia. ( 76.3 ±1.0cm with castors ) .8.twin wheel castors:the twin wheel castors should be injection moulded in black nylon.the manufacturer / oem should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001 from nabcb accredited agency. bidder / oem should have bifma membership certificate, greenguard by ul certified product in its product portfolio as applicable and aiota certificate. data sheet and product test reports should be submitted in the technical bid. 12 item number 12 godrej interio bravo visitor chair.1.seat / back assembly: the seat and back should be made up of 1.2 ±0.1cm. thick hotpressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a.back size 47.5 cm. ( w ) x58.0 cm ( h ) seat size 47.0 cm. ( w ) x 48.0 cm. ( d ) hr resilience ( hr ) polyurethane foam: the hr polyurethane foam should be moulded with density = 45±2 kg / m3 and hardness load 16 ± 2 kgf for 25% compression. 3. 3.armrests :the one piece armrests should be injection moulded from black co polymer polypropylene. 4. tubular frame: the powder coated ( dft 40 60 microns ) tubular frame should be cantilever type & made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. m.s. er.w. tube. the manufacturer / oem should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001 from nabcb accredited agency. bidder / oem should have bifma membership certificate, greenguard by ul certified product in its product portfolio as applicable and aiota certificate. data sheet and product test reports should be submitted in the technical bid. 13 item number 13 godrej interio aero large seat with neckrest.seat / back a ssembly: the seat is made up of 1.2 + 0.1cm thk. hot pressed plywood measured as per qa method described in ocp qlta pl14 18.the back is made up of injection mou1ded glass filled nylon & upholstered using mesh fabric with high tenacity yarn.* seat size ( larger seat depth ) : 47.0 cm. ( w ) x 51.5 cm ( d ) * back size : 45.0 cm. ( / v ) x 65.3 cm. ( h ) high resilience ( hr ) polyurethane foam: the hr polyurethane seat foam is moulded with density 45+ / 2 kg / m° and hardness 16 + 2 kgf as per is:7888 for 25% compression.armrests : the adjustable armrest is designed with the following features :• up down adjustment— 8 steps ( 8 0+0.scm range ) • height adjustable armrest structure which is powder coated & fitted with an armrest top.• fixed armrest top is pu moulded over metal insert.lumbar support assembly: the lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.the height of lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. lumbar pad has an adjustment of 8.0 + 0.5 cm in height. front pivot synchro mechanism: the adjustable tilting mechanism is designed with the following features. • 360° revolving type.• single point control.• front pivot for tilt with feet resting on ground ensuring more comfort.» tilt tension adjustment.• 4 position locking with anti shock feature. • seat / back tilting ratio of 1:2. pneumatic height adjustment. the pneumatic height adjustment has an adjustment stroke oi 10.0 + 0.3 cn°. pedestal assembly : the pedestal is injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. h=the pedestal pitch center dia is 66.1+0.5 cm.twin wheel castors: the twin wheel castors are injection moulded in black nylon.neckrest : the neckrest assembly consist of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. neckrest is fixed to back assembly through neckrest connector. neckrest assembly has weight adjustment of 4.2 + 0.5 cm and rotation adjustment of oyerat! 76°+ 2°. the complete neckrest assembly is retro fit to the main chair..the manufacturer / oem should provide along with technical bid iso 9001, iso 14001, iso 45001, iso50001 from nabcb accredited agency. bidder / oem should have bifma membership certificate, greenguard by ul certified product in its product portfolio as applicable and aiota certificate. data sheet and product test reports should be submitted in the technical bid...

Department Of Heavy Industry - Jharkhand

34041926 bids are invited for trench material bolted assembly vertical support single channel c1 of length 750mm , trench material bolted assembly vertical support single channel c1 of length 450mm , trench mat bolted assembly horizontal support cantilever arm ca1 of length 750mm alongwith necessary base plate,bolts nuts with springs washer etc required for fixing on vertical support channel , trench mat bolted assembly horizontal support cantilever arm ca1 of lnth 620mm along with necessary base plate bolt nutwith long spring washer etc required for fixing onvertical support channel , trench material boltedassembly horizontal support cantilever arm ca3 oflength 320mm alongwith necessary base plate boltsnuts with springs washer etc required for fixing onvertical support channel , trench material boltedassembly clamp cc1 suitable for single channel forfixing vertical support channel c1 alongwithnecessary anchor rawl bolts spring nuts washer etc total quantity : 5177...

Department Of Atomic Energy - Jharkhand

33975299 bids are invited for construction of community centre atturamdih township 1 earth work in excavation by mechanical means hydraulic excavator or manual means over areas exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan including disposal of excavated earth lead upto 50m and lift upto 1.5m disposed earth to be levelled and neatly dressed complete as per direction of eic. 2 excavating trenches of required width for pipes cables etc including excavation for sockets depth upto 1.5 m including getting out the excavated materials returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed within a lead of 50m as per direction of eic. pipes cables etc. not exceeding 80 mm dia. 3 filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 4 supplying and filling in plinth with foundation plinth wall sand under floors including watering ramming consolidating and dressing complete as per direction of eic. 5 surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m all kind of soil. 6 diluting and injecting chemical emulsion for postconstructional antitermite treatment excluding the cost of chemical emulsion treatment of soil under existing floors using chemical emulsion the existing floor. 7 treatment of existing masonry using chemical emulsion at the rate one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1 isto 2 1 cement isto 2 coarse sand to the full depth of the hole with chlorpyriphos or lindane ec 20 per cent with 1 percent concentration 8 providing and laying damp proof course 40mm thick with cement concrete 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate 12.5 mm nominal size. 9 extra for providing and mixing water proofing material in cement concrete work at the rate 1 kg per 50kg of cement. 10 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 isto 3 isto 6 1 cement isto 3 coarse sand isto 6 graded stone aggregate 20 mm nominal size including cost of cement reinforced cement as per direction of eic. 11 rcc in retaining walls roofs return walls walls any thickness including attached pilasters columns piers abutments pillars posts struts buttresses string or lacing courses parapets coping bed blocks anchor blocks plain window sills fillets upto floor five level excluding the cost of centering shuttering and finishing 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20 mm nominal size. 12 centering and shuttering including strutting propping etc. and removal of form for lintels beams plinth beams girders bressumers and cantilevers as per direction of eic. 13 reinforcement for rcc work including straightening cutting bending placing in position and binding all complete cold twisted bars 14 brick work with fps bricks of class designation 75 in foundation and plinth in cement mortar 1 isto 6 1 cement isto 6 coarse sand including mixing of mortar laying of bricks raking joints curing etc complete including cost of cement specification and direction of eic. 15 brick work with fps bricks of class designation 75 in super structure in cement mortar 1 isto 6 1 cement isto 6 coarse sand including mixing of mortar laying of bricks raking joints curing etc complete including cost of cement specification and direction of eic. 16 half brick masonry with fps bricks of class designation 75 in superstructure above plinth level upto floor v level. cement mirtar 1 isto 4 1 cement isto 4 coarse sand complete as per the direction of eic. 17 providing and fixing isi marked flush door shutters conforming to is2202 part i decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30mm thick including isi marked stainless steel butt hinges with necessary screws complete as per the direction of eic. 18 providing and fixing oxidised ms sliding door bolts with nuts and screws etc. complete 300 into 16mm 19 providing and fixing oxidised ms tower bolts black finish barrel type with necessary screws etc. complete 20 providing and fixing oxidised ms handles with necessary screws etc. complete 125mm 21 providing and fixing factory made steel glazed doors windows and ventilators side or top or centre hung with beading and all members of standard rolled steel sections joints mitred and flash butt welded and sash bars tenoned and riveted with 15 into 3mm lugs 10cm long embedded in cement concrete blocks 15 into 10 into 10cm of 1isto 3 isto 6 1 cement isto 3 coarse sand isto 6 graded stone aggregate 20mm nominal size or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including providing and fixing of hinges pivots float glass panes with glazing clips and special metal sash putty of approved make and a priming coat of approved steel primer excluding the cost of metal beading and other fittings except necessary hinges or pivots complete as per approved design complete as per the direction of eic. 22 providing and fixing tiron frames for doors windows and ventilators of mild steel tee ections joints mitred and welded with 15 into 3 mm lugs 10cm long embedded in cement concrete blocks 15 into 10 into 10 cm of 1 isto 3 isto 6 1 cement isto 3 coarse sand isto 6 graded stone aggregate 20 mm nominal size or with wooden plugs and screws or rawl plugs and screws or with dash fastener or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer complete as per the direction of eic. 23 providing and fixing ms fan clamp type i or ii of 16mm dia ms bar bent to shape with hooked ends in rcc slabs beams during laying including painting the exposed portion of loop all as per standard design complete complete as per the direction of eic. 24 cement concrete flooring 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete complete as per the direction of eic. 40mm thick with 20 mm nominal size stone aggregate. 25 providing and laying ceramic glazed floor tiles 300 into 300 mm thickness to be specified by the manufacturer of 1st quality conforming to is 15622 of approved make in colours such as white ivory grey fume red brown laid on 20mm thick cement mortar 1 isto 4 1 cement isto 4 coarse sand including pointing the joints with white cement and matching prgment etc. complete as per the direction of eic. 26 providing and fixing 1st quality ceramic glazed wall tiles conforming to is 15622 of approved make in all colours shades except burgundy bottle green black of any size as approved by eic in skirting, risers of steps and dados over 6 mm thick bed of cement mortar 1 isto 3 1 cement isto 3 coarse sand and jointing with grey cement slurry at the rate 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 27 providing and fixing on wall face pvc rain water pipes or toilet pipe including ms holder bat clamps wooden pegs etc with accessories like ci grating plain bend head shoes etc including filling joints with spun yarn soaked in neat cement slurry and cement mortar 1 isto 2 1 cement isto 2 fine sand including a coat of primer cost of all materials labour tools and tackles etc complete complete as per the direction of eic. upvc pipes working pressure 4 kgpersqm single socketed pipe 110 mm dia 28 12mm cement plaster of mix 1 isto 4 1 cement isto 4 fine sand complete as per the direction of eic. 29 15mm cement plaster on the rough side of single or half brick wall of mix 1 isto 6 1 cement isto 6 fine sand complete as per the direction of eic. 30 6mm cement plaster 1 isto 3 1 cement isto 3 fine sand finished with a floating coat of neat cement and thick coat of lime wash on top of walls when dry for bearing of rcc slabs and beams complete as per the direction of eic. 31 supplying and applying two 2 coats of white wash over old work at various elevations including preparation of surfaces cleaning etc. complete with all materials labour tools and tackle etc scaffolding work as per specifications and directions of eic. composition water at the rate 5 litres per kg of lime for making cream. fevicol ddl at the rate 4 gm per litre of lime cream. robin blue at the rate 2gm. per kg lime. 32 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work two or more coats over and including priming coat with cement primer. 33 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade approved brand and manufuacturer and ist quality 10 yrs like asian berger nerolac ici dulux old work one or more coats applied at the rate 0.83 ltr per10 sqm. 34 applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work second coat 35 painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work. 36 providing groove of uniform size in plastered surface as per approved pattern using wooden battens bnailed to the under layer including of wooden battens repairs to the edges of the plaster panel and finishing the groove complete as per specifications and direction of eic including all materials labour tools and tackles etc complete. 12mm into 12mm 37 demolishing cement concrete manually or by mechanical means including disposal of material within 50 metres lead as per direction of eic. 1 isto 3 isto 6 or richer mix 38 demolishing brick work in cement mortar including tacking of serviceable material and disposal of unserviceable material within 50 metres lead including all materials labour tools and tackles etc complete 39 making plinth protection 50mm thick of cement concrete 1 isto 3 isto 6 1 cement isto 3 coarse sand isto 6 graded stone aggregate 20 mm nominal size over 75 mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 40 providing and fixing water closet squatting pan indian type wc pan with 100mm sand cast iron p or s trap 10 litre low level white pvc flushing cistern with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern wc pan of size 580 into 440mm with integral type foot rests. 41 providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors ci trap and bend 100 mm inlet and 75 mm outlet sand cast iron sands as per is1729 42 providing and fixing 600 into 450 mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground fixed to wooden cleats with c p brass screws and washers complete 43 providing & fixing 600 into 120 into 5mm glass shelf with edges round of supported on anodised aluminium angle frame with c p brass brackets and guard rail complete fixed with 40mm long screws rawl plugs etc. complete 44 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm long towel rail with total legth of 645mm width 78mm and effective height of 88mm weighing not less than 190 gms. 45 providing and fixing 2mm thick plaster of paris 46 providing and fixing gi pipe complete with gi fittings and clamps i or c cutting and making good the walls etc. complete as per the direction of eic. 15mm dia nominal bore 47 providing and fixing gi pipe complete with gi fittings and clamps i or c cutting and making good the walls etc. complete as per the direction of eic. 20mm dia nominal bore 48 providing and fixing gi pipe complete with gi fittings and clamps i or c cutting and making good the walls etc. complete as per the direction of eic. 25mm dia nominal bore 49 providing and fixing gun metal gate valve with ci wheel of approved quality screwed end 25 mm nominal bore 50 providing and fixing cp brass shower rose with 15 or 20mm inlet 100 mm diameter make emco 51 providing and fixing c p brass bib cock of approved quality make emco 15mm nominal bore 52 constructing masonry chamber 60 into 60 into 75cm inside with 75 class designation brick work in cement mortar 1 isto 4 1 cement isto 4 coarse sand for sluice valve with ci surface box 100mm top diameter 160 mm bottom diameter and 180mm deep inside with chained lid and rcc top slab 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20 mm nominal size necessary excavation foundation concrete 1 isto 5 isto 10 1 cement isto 5 fine sand isto 10 graded stone aggregate 40mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement isto 3 coarse sand 12mm thick finished with a floating coat of neat cement complete as per standard design with fps bricks complete as per the direction of eic. 53 providing & fixing c p brass stop cock concealed of standard design and of approved make conforming to is 8931.15mm nominal bore. 54 making soak pit 2.5 m diameter 3.0 metre deep with 45 into 45cm dry brick honey comb shaft with bricks of class designation 75 and sw drain pipe 100mm diameter 1.8m long complete as per standard design with fps bricks 55 grading roof for water proofing treatment with cement concrete 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20mm nominal size 56 providing and placing on terrace at all floor levels polyethylene water storage tank isi 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflor pipes but without fittings and the base support for tank.make sintex 57 providing and fixing wash basin with ci brackets 15mm cp brass pillar taps 32mm cp brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required white vitreous china wash basin size 630 into 450 mm with a pair of 15mm c. p brass pillar taps complete as per the direction of eic. 58 wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in surface or recessed medium class pvc conduit as required 2 into 6 sqmm plus 1 into 6 sq mm earth wire 59 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc.as required 60 wiring for light or power plug with 2 into 4 sqmm frls pvc insulated copper conductor single core cable in surface ot recessed medium class pvc conduit alongwith 1 no. 4 sqmm frls pvc insulated copper conductor single core cable for loop earthing as required 61 supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required 62 3 pin 5or6 a socket outlet 63 6 pin 15or16 a socket outlet 64 supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required 65 supplying and fixing following size or modules gi box alongwith modular base and cover plate for modular switches in recess etc. 1 or 2 module 75 mm into 75 mm 66 4 module 125 mm into 75 mm 67 8 module 125 mm into 125 mm 68 supplying and fixing 3 pin 5 a ceiling rose on the existing junction box or wooden block including connections etc. as required 69 erection of wall bracket or ceiling fittings of all sizes and shapes containing upto two gls lamps per fitting complete with all accessories including connections etc. as required 70 installation testing and commissioning of pre wired fluorescent fitting or compact fluorescent fitting of all types complete with all accessories and tube etc. directly on ceiling or wall including connections with 1.5 sqmm fr pvc insulated copper conductor single core cable and earthing etc. as required 71 providing and fixing following rating and breaking capacity mccb in existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required 100 a 16 ka 72 supplying and fixing 5 a to 32 a rating 240or415 v 10 ka c curve miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections testing and commissioning etc. as required single pole 6 amp 73 supplying and fixing following rating four pole three phase and neutral 415 v residual current circuit breaker rccb having a sensitivity current 30 ma in the existing mcb db complete with connections testing and commissioning etc. as required 63 amps 74 earthing with gi earth pipe 4.5 meter long 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal or coke and salt as required 75 supplying and laying 25 mm into 5 mm g.i strip at 0.50 meter below ground as strip earth electrode including connection or terminating with gi nut bolt spring washer etc. as required. jointing shall be done by overlapping and with 2 sets of g.i nut bolt and spring washer spaced at 50 mm 76 fixing of lightning conductor finial single prong with base plate including holes etc. complete as required 77 providing and fixing g.i tape 20 mm into 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.for horizontal run 78 providing and fixing g.i tape 20 mm into 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. for vertical run 79 laying of one number pvc insulated and pvc sheathed or xlpe power cable of 1.1 kv grade of following size direct in ground including excavation sand cushioning protective covering and refilling the trench etc. as required upto 35or50 sq. 80 excavation for cable trench / foundation in soft soil including dressing of sides and ramming of ottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 meter 81 supply of 46inch 1200 mm sweep energy efficient 5 star high speed ceiling fan with electronic regulator size 150 watt make crompton complete in all respect as per specification and direction of eic. high breeze colour brown or ivopry 82 supply 1 into 40w led tube light make philips type bn 550 wled 20 to 300 led linea 83 supply and fixing of single phase energy meter kwh with box of model no. 1plcd meter 5 to 30a catno. wm1018csdl0bok make land t...

Department Of Fertilizers - Jharkhand

33810962 bids are invited for grease gun as per is 7794 (q4) , cantilever tool box (q3) , miniature circuit breakers is 60898 1:2002 (q3) , platform step ladder (q4) , rubber gloves for electrical purposes as peris:4770 (q3) , insulated toolkit (q3) , m seal is 9197 (q3) ,transformer oil sampling bottles (q3) total quantity : 137...

Department Of Atomic Energy - Jharkhand

33567853 bids are invited for title1 earth work in excavation over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm. on plan ) including disposal of excavated earth lead up to 50m and lift up to 1.5 m, dispose earth to be level and neatly dressed complete as per the instruction of engineer in charge.all kinds of soil / soft rock / weathered rock 20 title2 supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 15 title3 surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto 1.5m all kinds of soil 500 title4 cleaning jungle including uprooting of rank vegetation, grass, brush wood, trees and sapling of girth upto 30cm. measured at a height of 1 m above ground level and removal of rubbish upto a distance of 2km out side the periphery of the area cleared by your own vehicle. 1000 title5 providing and laying in position plain cement concrete 1 / 2 / 4 ( 1 cement / 2 coarse / 4 graded stone aggregates 20 mm nominal size ) excluding the cost of centering, shuttering and cement san in foundation, footings, and bases of column as per specifications and drawings and direction of engineer in charge. 10 title6 providing and laying reinforced cement concrete work 1 / 1.5 / 3 ( 1 cement / 1.5 coarse sand / 3 graded stone aggregate using 20 mm down screened and washed ) including machine mixing, placing in position and mechanically vibrating in footing, column, plinth beam up to plinth level and like including preparing of the top surface finishing curing ecomplete in all respects as per specification and direction. 5 title7 providing and laying reinforced cement concrete work 1 / 1.5 / 3 ( 1 cement / 1.5 coarse sand / 3 graded stone aggregate using 20 mm down screened and washed ) including machine mixing, placing in position and mechanically vibrating in beams, suspended floor landing, balconies, lintel etc.to any floor and any where and like including preparing of the top surface finishing curing complete in all respects as per specification and direction. 10 title8 hire and labour charges for providing and fixing straight shuttering for concrete works to anywhere at any floor ( including staging ) including strutting, propping etc. and removal of form or striking out after completion of works as directed and specified by the engineer in charge a ) foundations, footings, bases of columns plinth beam etc 10 title9 b ) suspended floors, roofs, landings, balconies, shelves etc. 35 title10 c ) lintels, beams, cantilever etc. 25 title11 steel reinforcement ( for reinforced cement concrete work ) including transporting, decoiling, straightening, derusting, placing, cutting to requisite length, hooking, bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection including removal of loose rust and applying a coat of cement wash if necessary complete in all respects as per drawing and at any floor as directed. 500 title12 brick work with bricks of class designation 75 in foundation and plinth in cement mortar 1 / 6 ( 1 cement / 6 coarse sand ) . 5 title13 brick work with bricks of class designation 75 in superstructure with cement mortar 1 / 6 ( 1 cement / 6 coarse sand ) including all materials, labour, scaffolding, racking out joints, curing as per specification and direction of the engineer in charge. 10 title14 half brick masonry with bricks of class designation 75 in super structure above plinth level upto floor v level.cement mortar 1 / 4 ( 1 cement / 4 coarse sand ) . 10 title15 providing and fixing factory made solid core, commercial flush door shutters non decorative type, core of block board construction with well seasoned chemically treated timber of moisture content, not exceeding 12 per cent and side styles, top and bottom rails of main width as per i.s. code, well seasoned hard wood chemically treated and well matched commercial ply veneering with vertical grains on cross bends on both faces of shutters, hot pressed and banded with phenol formaldehyde synthetic resin conforming to i.s. / 2202 ( part –i ) / 1930 a ) 35mm thick shutter with 100mm oxidized s.s. butt hinges with necessary screws for double or single leaf shutters complete. 12 title16 providing and fixing aluminum. ( heavy type ) sliding door bolts with nuts and screws etc. complete.a ) 300 x 16mm 6 title17 providing and fixing anodized aluminum tower bolt ( heavy type ) including necessary screws etc. complete. 150 x 10mm 8 title18 providing and fixing bright finished brass casement window fasteners of minimum weight 200 grams to side hung steel windows with necessary welding and machine screws etc. complete. 10 title19 providing and fixing bright finished brass peg stays 300mm long of minimum weight 330 grams. to side hung steel windows with necessary welding and machine screws etc. complete. 12 title20 providing and fixing anodized aluminum tower bolt including necessary screws etc. complete.250 x 10mm 8 title21 providing and fixing anodized aluminum door handle including necessary screws etc. complete.a ) 125mm 12 title22 24 mm thick factory made pvc door shutters made of styles and rails of a upvc hollow section of size 59x24 mm and wall thickness 2 mm ( plus minus 0.2 mm ) with inbuilt edging on both sides.the styles and rails mitred and joint at the corners by means of m.s. galvanised / plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. the styles of the shutter reinforced by inserting galvanised m.s. tube of size 20x20 mm and 1 mm ( plus minus 0.1 mm ) wall thickness. the lock rail made up of h section, a upvc hollow section of size 100x24 mm and 2 mm ( plus minus 0.2 mm ) wall thickness, fixed to the shutter styles by means of plastic / galvanised m.s. u cleats the shutter frame filled with a upvc multi chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ( plus minus 0.1 mm ) wall thickness. the panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised m.s. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of engineer in charge. ( for w.c. and bathroom door shutter ) . 4 title23 providing and fixing structural steel work reveted, bolted or welded in built up sections, trusses and framed work , including cutting hoisting, fixing in position and applying a priming coat of approved steel primer. 250 title24 steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. a ) hot finished welded type tubes. 200 title25 brick on edge flooring with bricks of class designation 7.5 on a bed of12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks. 10 title26 providing and laying for 40mm thick cement concrete in flooring, in ratio 1 / 2 / 4 ( 1 cement / 2 coarse sand / 4 stone aggregate ) finished with a floating coats of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete including cost of all materials but excluding cost of cement. 5 title27 providing & fixing for laying chequred precast concrete portico tiles of size 300mm x 300mm durastone heavy duty vitrified tiles of color back ground ( make endura / somany ) of size as required in footpath and courtyard, etc. laid on a bed of 20mm thick cement mortar 1 / 4 ( 1 cement / 4 coarse sand ) finishing with flush pointing in white / color cement as required. 75 title28 providing and laying vitreous floor tiles in different sizes ( thickness to be specified by the manuaturer ) with water absorption less than 0.08% and conforming to is 15622 oif aproved make in all colours and shades laid on 20mm thick cement mortar 1 / 4 ( 1 cement / 4 coarse sand ) jointing wth grey cement slurry at the rate of 3.3kg / sqm including grouting the joints with white cement an matching pigments etc complete. size of tile 600 x 600 mm ( somany / kajaria ) 480 title29 providing and fixing pre coated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm ( plus 0.05 % ) total coated thickness with zinc coating 120grams per sqm as per is 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55 mm ) with epdm seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 150 title30 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type a, including jointing with seal ring conforming to is 5382, leaving 10 mm gap for thermal expansion, ( i ) single socketed pipes.110 mm diameter 15 title31 providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm ( plus 0.05 % ) total coated thickness, zinc coating 120 grams per sqm as per is 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws complete. a ) ridges plain ( 500 600mm ) 75 title32 b ) gutter ( 600 mm over all girth ) 30 title33 12 mm cement plaster of mix 1 / 6 ( 1 cement / 6 coarse sand ) 200 title34 providing neat cement punning about 1.5mm thick in wall, dado, window sills, plinth etc. and like at any level to anywhere as directed and specified by the engineer in charge. 50 title35 white washing with lime to give an even shade new work ( three or more coats ) . 400 title36 supplying and painting with synthetic enamel paint / aluminum paint of approved brand and manufacture two or more coats in new work..two or more coats in new work. 125 title37 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.m including cutting the patches in proper shape, raking out joints and preparing and plastering ( 1 / 4 ) the surface of the walls complete shade including cost of all materials, labours, scaffolding, tools and tackles , disposal of rubbish to the dump yard with in 50 m lead excluding the cost of cement. 50 title38 providing and fixing of glass panes, with putty and nails wherever necessary glass panes 4mm thick. 15 title39 removing white or color wash snowcem / distemper by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 150 title40 finishing walls with premium acrylic smooth exterior paint ( weather coat ) with silicone additives of required shade new work ( two or more coats applied at the rate 1.43 ltr / 10 sqm over and including priming coat of exterior primer applied at the rate of 2.20 kg / 10 sqm ) 350 title41 demolishing of cement conc. including disposal of material within 50m lead in the ratio 1 / 3 / 6 or richer mix 10 title42 dismantling of old brick work including stacking of serviceable material and disposal of unserviceable material within 50m lead.in cement mortar. 10 title43 dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 300 title44 transport of above materials by physical / mechanical means within 2km. 1 title45 extra for marking of structural steel work required to be re erected ( cutting, hoisting, welding etc. to be done if required ) . 500 title46 dismantling of old plaster or skirting raking out joints and cleaning the surface of plaster including disposal of rubbish to the dumping yard with 50 mtr. lead. 12 title47 providing and fixing white vitreous china wash basin with c.i. / m.s. brackets, 15mm c.p.brass pillar tap ( single ) 32mm c.p. brass waste of standard pattern, including pvc waste pipe and pvc connector pipe including painting of fitting and brackets , cutting and making good the walls wherever required.a ) wash basin size 550 x 400mm.make hindware / parryware / roca 2 title48 providing and fixing stainless steel a isi304 ( 18 / 8 ) kitchen sink as per is 13983 with c.i.brackts and stainless steel plugs 40mm including making all connection excluding cost of fittings with drain board.size 1040x510x250mm make ( hindware / parryware / roca / cera. ) 2 title49 providing and fixing 32 mm dia. p.v.c. flexible waste pipes for sinks and wash basins. 6 title50 providing and fixing soil, waste and vent pipes 5 title51 providing and refixing of 1st quality tata gindal make g.i.pipe removing of old g.i.pipes and complete with g.i.fittings and clamp including cutting and making good the wall etc. a ) 15mm dia nominal bore 15 title52 b ) 20mm dia. nominal bore 15 title53 providing and fixing gun metal gate valve with c.i. wheel of approved quality ( screwed end ) a ) 25 mm nominal bore 1 title54 b ) 20 mm nominal bore 1 title55 c ) 15 mm nominal bore 6 title56 providing and fixing gun metal non return valve of approved quality ( screwed end ) 25mm nominal bore a ) horizontal 1 title57 b ) vertical 1 title58 providing and fixing heavy duty c.p brass bib cock of 15mm nominal bore as per approved sample ( brand jaquar / omco ) . 10 title59 providing and fixing heavy duty c.p brass stop cock ( concealed ) of 15mm nominal bore as per approved sample. ( brand jaquar ) . 6 title60 providing, laying and jointing glazed stone ware pipes 150mm dia grade – a with stiff mixture of cement mortar in the proportion of 1 / 1 ( 1 cement / 1 fine sand ) including testing of joints etc. complete. excluding the cost of cement. 10 title61 providing, laying cement concrete 1 / 5 / 10 ( 1 cement / 5 coarse sand / 10 stone aggregate of 40mm size ) all round s.w.pipes including bed concrete as per standard design . 150mm dia s.w. pipe 10 total quantity : 5781...

Department Of Heavy Industry - Jharkhand

33411190 bids are invited for supply of cable tray support system boltable type 1 single channel sc1 ( in standard length of 6m per piece ) . also refer technical specification 2 double channel dc1 ( in standard length of 6m per piece ) . also refer technical specification 3 cantilever arm for 600mm wide cable trays ( 620mm ) . also refer technical specification 4 cantilever arm for 300mm wide cable trays ( 320mm ) . also refer technical specification 5 cantilever arm for 150mm wide cable trays ( 170mm ) . also refer technical specification 6 clamp for single channel cc1. also refer technical specification 7 clamp for double channel cc2. also refer technical specification 8 tray fixing clamp tc1. also refer technical specification 9 beam clamp bc1. also refer technical specification total quantity : 85100...

Coal Mines Provident Fund Organisation - Jharkhand

33281332 bids are invited for item number 1 the chair should be green assured validated by tuv india as per sov, tuv eco 2011 / 008. the seat should be made up of 1.2 ± 0.1cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with leather and moulded polyurethane foam. the back foam should be designed with contoured lumber support for extra comfort. back size is 53.0cm. ( w ) x 95.4cm. ( h ) seat size is 54.6cm. ( w ) x 49.0cm. ( d ) . the hr polyurethane foam should be moulded with density = 45 + / 2 kg / m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. the seat and back should be arrested together with spine made of 0.8±0.05 cm thk hr steel and is black powder coated ( oft 40 60 microns ) . the armrest assy. should be comprised of three parts viz. the armrest support tube and p.u. armrest and the armrest top. the armrest tube assy. is made of 2.54±0.03cm x 0.16±0.0128cm m.s.e.r.w. support tubes and chrome plated. the p.u. armrest should be made of black integral skin polyurethane with 50 70 shore a hardness and reinforced with m.s. insert. the armrest top should be made of abs & upholstered with foam & leather. the mechanism should be designed with the following features: •360° revolving type. •seat back tilting ratio of 1 : 1.5 •front pivot for tilt with feet resting on ground ensuring more comfort. •tilt tension adjustment. •5 position locking with anti shock back mechanism, which prevents the backrest from impacting the user when the lock should be released. •static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking. the height adjustment should have an adjustment stroke of 9.0 ± 0.3cm. the bellow should be 1 piece and blow moulded in black polypropylene. the pedestal should be made of die cast aluminium with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch center dia. ( 77.0 ± 1.0cm with castors ) . the twin wheel castors should be injection moulded in black nylon. 2 item number 2 1 ) seat assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with leatherette and moulded high resilience ( hr ) polyurethane foam of density 45±2 kg / m3, and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. *seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) 2 ) back assembly: the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with leatherette. back size: 47.7 cm. ( w ) x 60.1 cm. ( d ) visitor tubular frame: the tubular frame should be cantilever type and made of ø2.54± 0.03 cm x 0.02 ± 0.016cm thick ss 202 tube. the back should be connected to frame through chrome plated high pressure die case connector piece. overall dimensions of chair seat height 44.8cm height 98.2cm. width & depth of chair as measured from base width 60.9 cm and depth 64.2 cm.the product should have bifma level 2 certification. 3 item number 3 overall size : width : 203cm depth : 99cm height : 98cm seating height : 47cm leather / pvc / fabric:pu, pvc , frame material:wood, foam, pu, pvc, sofa spring, flexible belt, pocket spring . seat foam: ( density, type ) :35#hard , back foam: ( density, type ) :35#soft. leg material:wood specifications 4 item number 4 overall size : width : 100cm depth : 99cm height : 98cm seating height : 47cm leather / pvc / fabric:pu, pvc , frame material:wood, foam, pu, pvc, sofa spring, flexible belt, pocket spring . seat foam: ( density, type ) :35#hard , back foam: ( density, type ) :35#soft. leg material:wood 5 item number 5 overall size : width : 100cm depth : 65cm height : 45cmtable legs meterials:color :cherry, table top materials & size : ( tempered glass / 10mm ) , l x w x t : 1000x650x10mm color : clear 6 item number 6 the almirah should have an overall size of 916mm ( w ) x486mm ( d ) x1981mm ( h ) with welded construction. it should have the shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm ( high yield strength ) and all other components should have a thickness of 0.9mm. these components should be made of crca ‘d’ grade high yield strength as per is:513. the almirah should have a mazak handle and three way locking mechanism with shooting bolts. it should have a height wise adjustable shelf mounting which should have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing should include epoxy powder coated to the thickness of 50 microns ( + / 10 ) . the product should have greenguard by ul certification. total quantity : 11...

South Eastern Railways - Jharkhand

32318900 .modification of ohe for rectification of ohe profile in curve section , replacement of rusted steel anticreep in polluted zone amp rusted cantilever ., ...

Department Of Technical Education - Jharkhand

32317733 bids are invited for sextant measuring tape , young s modulus , 3 1 2digit digital multimeter manual range , carrey foster bridge with four gap complete setup , norton s theorem with bakelite panel and round meters , thevenin s theorem with bakelite panel and round meters , pn zener diode led characteristics apparatus , thermo electric , to determine the refractive index of the material of a prism using sodium light , determine the wave length of sodium lamp by newton ring method , universal b.h curve apparatus , zener diode , fet characteristics apparatus with aluminum panel and square meters , mosfet characteristics apparatus with aluminum panel and square meters , amplitude modulation and demodulation , operational amplifier as inverting, non inverting, unity gain amplifier and frequency response with analog voltmeter , operational amplifier as differentiator and integrator , determine of the specific rotation of the cane sugar solution with the help of polarimeter , boltzman constant apparatus with pn junction diode with aluminum panel and digital panel meters , to determine 1 wavelength he ne laser using plane diffraction grating. complete set , strain gauge trainer kit with cantilever beam , molecular atomic models , magnetic stirrer with hot plate , rotary flask shaker , variable volume micropipette , analytical balance , double beam uvvis spectrophotometer , benzaldehyde 500ml , aniline 500ml , ethyl alcohlal 500ml , acetone 500ml , benzoic acid 500gm , benzene 500ml , phosphoric acid 500ml , barium diphenylamine sulphonate ar 25gm , hydrogen fluoried 500gm , digital tds meter labtronics , dissolved oxygen meter , dissolved turbidity meter , maximum minimum therme meter , ph meter , phytoplankton net mesh size 10, 25, 50, 100 , plankton counting cell sedwich rafter , secchi disk , haemocytometer , insect box...

Department Of Heavy Industry - Jharkhand

32004131 bids are invited for trench material bolted assembly, vertical support single channel c1 of length 750mm , trench material bolted assembly, vertical support single channel c1 of length 450mm , trench mat bolted assembly, horizontal support cantilever arm ca1 of length 750mm along with necessary base plate, bolts, nuts with springs, washer etc required for fixing on vertical supp chan , trench mat bolted assembly, horizontal support cantilever arm ca1 of lnth 620mm along with necessary base plate, bolt, nut with long spring, washer, etc required for fixing on vertical supp chanl , trench mat bolted assembly, horizontal support cantilever arm ca3 of length 320mm alongwith necessary base plate, bolt, nut with springs, washer etc required for fixing on vertical supp chan , trench material bolted assembly, clamp cc1 suitable for single channel for fixing vertical support channel c1 along with necessary anchor or rawl bolts or spring nuts or washer etc auto extension if any seller submits price in last 15 minutes, the rawill be auto extended by 15 minutes. ( a maximum of300 times ) total quantity : 5177...

Department Of Heavy Industry - Jharkhand

31285322 bids are invited for trench material bolted assembly, vertical support single channel c1 of length 750mm , trench material bolted assembly, vertical support single channel c1 of length 450mm , trench mat bolted assembly,horizontal support cantilever arm ca1 of length 750mm along with necessary base plate,bolts, nuts with springs,washer etc required for fixing on vertical supp chan , trench mat bolted assembly,horizontal support cantilever arm ca1 of lnth 620mm along with necessary base plate,bolt, nutwith long spring, washer, etc required for fixing onvertical supp chanl , trench mat bolted assembly,horizontal support cantilever arm ca3 of length320mm alongwith necessary base plate, bolt, nut withsprings, washer etc required for fixing on verticalsupp chan , trench material bolted assembly, clampcc1 suitable for single channel for fixing verticalsupport channel c1 along with necessary anchor orrawl bolts or spring nuts or washer etc total quantity : 5177...

Department Of Atomic Energy - Jharkhand

30978077 bids are invited for boq title annual civil maintenance work at jharia magazine total quantity : 48110 item1 earth work in excavation over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm. on plan ) including disposal of excavated earth lead up to 50m and lift up to 1.5 m, dispose earth to be level and neatly dressed complete as per the instruction of engineer in charge. all kinds of soil / soft rock / weathered rock item2 cleaning jungle including uprooting of rank vegetation, grass, brush wood, trees and sapling of girth upto 30cm. measured at a height of 1 m above ground level and removal of rubbish upto a distance of 2km out side the periphery of the area cleared by your own vehicle. item3 finishing walls with waterproofing cement paint of approved brand and manufacture and of required shade ( two or more coats ) to give an even shade. item4 providing and laying plain cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size ) in foundation, plinth wherever necessary including desalinating, finishing, curing etc. as per specification all complete but centring and shuttering etc. item5 providing and laying reinforced cement concrete work 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate using 20 mm down screened and washed ) including machine mixing, placing in position and mechanically vibrating in footing, column, plinth beam up to plinth level and like including preparing of the top surface finishing curing ecomplete in all respects as per specification and direction. item6 reinforced cement concrete work in chimneys, shafts, up to floor five level , excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) :3 graded stone aggregate 20 mm nominal level , excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) :3 graded stone aggregate 20 mm nominal size ) . item7 hire and labour charges for providing and fixing straight shuttering for concrete works to anywhere at any floor ( including staging ) including strutting, propping etc. and removal of form or striking out after completion of works as directed and specified by the engineer in charge : a ) foundations, footings, bases of columns plinth beam etc item8 b ) suspended floors, roofs, landings, balconies, shelves etc. item9 c ) lintels, beams, cantilever etc. item10 steel reinforcement ( for reinforced cement concrete work ) including transporting, decoiling, straightening, derusting, placing, cutting to requisite length, hooking, bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection including removal of loose rust and applying a coat of cement wash if necessary complete in all respects as per drawing and at any floor as directed. item11 brick work with bricks of class designation 75 in foundation and plinth in: cement mortar 1:6 ( 1 cement : 6 coarse sand ) . item12 brick work with bricks of class designation 75 in superstructure with cement mortar 1:6 ( 1 cement : 6 course sand ) including all materials, labour, scaffolding, racking out joints, curing as per specification and direction of the engineer in charge. item13 half brick masonry with bricks of class designation 75 in super structure above plinth level upto floor v level.cement mortar 1:4 ( 1 cement: 4 coarse sand ) . item14 12 mm cement plaster of mix : 1: 6 ( 1 cement : 6 coarse sand ) item15 supplying and applying two ( 02 ) or more coats of white wash to walls, ceilings etc. at all levels including preparation of surfaces, cleaning etc. complete with all materials, labour, scaffolding, tools and tackles etc. complete in old work. item16 supplying and painting with synthetic enamel paint / aluminum paint of approved brand and manufacture two or more coats in new work. item17 providing and fixing g.i. chain link fabric fencing of required width in mesh size 50 x 50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of engineer in charge. : a ) made of gi wire of dia 4mm item18 providing and fixing of wire fabrick ( babed wire ) on angle post with fixing 6 horizontal lines two diagonals of barbed wire with g.i. staples on top of the angle fens post. ( barbed wire 9.38kg per 100mtr ) . payment to be made per mtr.cost of total length of barbed wire used. item19 providing and laying for fixing g.i. pipes complete with g.i. fittings and clamps, including cutting and making good the walls etc. ( internal work ) free of cost : a ) 15mm dia nominal bore item20 b ) 20mm dia. nominal bore item21 sweeping and cleaning of all toilet, security barrack , out side lawn, concrete pavement, pathways , bituminous road etc for the following including the collection of dry leaves, poly paper , debris, unwanted materials, garbage and disposal of the same to a specified area by own transport. item22 providing and supplying the following manpower for repair of chajja, facia, roof top coping window sill, toilet & trap repairing, w.c.pan repairing, kitchen sink repairing, a.c, repairing of door windows etc hole closing, small non measurable plastering , balcony railing repairing, grill fixing, hand rail fixing, door frame fixing / dismantling as directed by engg in charge.skilled 1no.unskilled 1no. item23 providing and supplying the following manpower for fixing and repairing of pipe line work of any diameter , removing and refixing of w.c. pan ( indian & european ) , wash basin, sink, shower, all type of valves, mirror, towel rail etc. including all necessary tools and tackles but excluding the cost of consumable materials as per direction of engg in charge. a ) plumber ( skilled ) 1no.b ) helper ( unskilled ) 1no....

Department Of Fertilizers - Jharkhand

30626186 bids are invited for wilfit spares (q3) , cantilever tool box (q3) , screw drivers is:844 (q4) , driving cum mechanics tool kit (q3) ,crimping tools (q3) total quantity : 95...

Department Of Building And Construction - Jharkhand

30557918 quotations are invited from reputed manufacturers / authorized dealers / suppliers and other stakeholders authorized for respective items ( a ) wooden works a01 supplying of door shutter and chaukhat panelling for new door with wooden framed of 12mm thick in choukhat and pasting 4mm thick veneer in both side all complete ( including all type of fancy fitting & royalty ) . ply board 12mm thick greenply, century or isi mark water proof ply grade, laminate: 4mm thick greenply / decowood veneer a02 supplying of door shutter and chaukhat panelling for old door with wooden framed of 12mm thick in choukhat, wooden framed of 6mm thick in door shutter and pasting 4mm thick veneer in both side all complete ( including all type of fancy fitting & royalty ) . ply board 12mm & 6mm thick greenply, century or isi mark water proof ply grade, laminate: 4mm thick greenply / decowood veneer a03 supplying of door shutter and choukhat panelling for new door with wooden framed of 12mm thick in choukhat and pasting 1mm thick sun mica in both side all complete ( including all type of fancy fitting & royalty ) . ply board 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / decowood sun mica a04 supplying of door shutter and choukhat panelling for old door with wooden framed of 12mm thick in choukhat, 6mm thick in door shutter and pasting 1mm thick sun mica in both side all complete ( including all type of fancy fitting & royalty ) . ply board 12mm & 6mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / decowood sun mica a05 supply of corner rack with 19mm thick ply, pasting 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick sunmica greenlam / centurylam, glass: 6mm plain glass furniture: godrej multipurpose lock. a06 supply of wall shelf with 19mm thick ply, pasting 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam. a07 supply of wooden ramp with 19mm thick ply 12mm thick wooden flooring ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, wooden flooring: 12mm thick wooden flooring a08 supply of wall rack / file cabinet with 19mm thick ply and pasting 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica a09 supply of wall rack / file cabinet with 19mm & 12mm thick ply and pasting 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica a10 supply of board wall partition ( wooden partition ) with 19mm thick ply, etching glass vertical standing position, framing with wooden bit, ply board both side shutering with 12 mm thick water proof century ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm &12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica glass: 6mm glass with etching design a11 supply of window rack with 19mm thick ply, 6mm thick plain glass and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica glass: 6mm plain glass a12 supply table / file desk with 19mm thick ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle : drawer handle, drawer channel : ball bearing drawer channel 400mm godrej a13 supply of modular kitchen cupboard with basket with 19mm thick ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, hinges & drawer channel : soft hinges & godrej drawer channel, handle: godrej, basket:hettich a14 supply of modular kitchen cupboard with 19mm and 12mm ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm and 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, hinges & drawer channel : soft hinges & godrej drawer channel, handle: godrej, a15 supply of modular kitchen cupboard with 19mm ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, hinges & drawer channel : soft hinges & godrej drawer channel, handle: godrej, a16 supply of kitchen rack with 19mm and 12mm ply, 6mm front etching design glass and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle: 4 handle, lock of furniture: godrej multipurpose lock. glass: 6mm glass with etching design a17 supply of kitchen rack with 19mm and 12mm ply, 6mm plain glass in rack and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle: 4 handle, lock of furniture: godrej multipurpose lock, glass: 6mm plain glass. a18 supply of coffee table with 19mm and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle: 4 handle, lock of furniture: godrej multipurpose lock. a19 supply of upper head cabinet cum rack or wall unit or file cabinet with 19mm and 12mm ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle: 4 handle, lock of furniture: godrej multipurpose lock. a20 supply of upper head cabinet cum rack or wall unit or file cabinet with 19mm ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, outside laminate: 1mm thick greenlam / centurylam, inside laminate: 0.8mm thick greenlam / centurylam, channel / soft closing hinge: hetich ( 202 s.s grade ) , lock of furniture : godrej / cent, handle / jali : brass / s.s finish handle, door closer: helix / ebco / hettich / yama ( 202 ss grade ) edge binding same laminate / p.v.c a21 supplying of ply board 19mm thick greenply ( green gold ) / century or isi mark water proof ply grade. ( i ) 4mm thick ( ii ) 6mm thick ( iii ) 12mm thick ( iv ) 19mm thick ( v ) 25mm thick ( vi ) 30mm thick a22 supplying of decowood 4mm thick veneer. ( i ) model: golden cedar 7661 ( ii ) model: apple tree 7172 ( iii ) model: bansal aromia 4507 ( iv ) model: oriental ash 7042 a23 supplying of greenlam laminate 1mm & 0.8mm thick spl finishes. ( i ) model: p10 ( 1mm thick ) ( ii ) model: hdg ( 1mm thick ) ( iii ) model: normal suede / solid / matt ( 1mm thick ) ( iv ) model: normal suede / matt / fancy ( 0.8mm thick ) ( v ) model: pearl ( 1924, 1923 ) / marker grade / chalk grade ( 0.8mm thick ) a24 supplying of all height wall panelling with 12 mm plywood ( green / optima / red ) over 2x1 aluminum section, 6 mm thick water proff veener and polish fininsh including all taxes and royalty all complete as per building specification and direction e / i. a25 supplying of wooden flooring 12mm plywood ( green / optima / red ) thick including all taxes and royalty all complete as per building specification and direction e / i. a26 providing anti temite treatment wiih all labour and material all complete work as per instruction of e / i. a27 supplying of ply wood greenply ( green gold ) or isi mark water proof ply grade including all materials, labour, taxes all complete as per building specification and direction of e / i. ( i ) 6mm thick ( ii ) 12mm thick ( iii ) 19mm thick ( iv ) 25mm thick a28 supplying of ply wood century or isi mark water proof ply grade including all materials, labour, taxes all complete as per building specification and direction of e / i. ( i ) 6mm thick ( ii ) 12mm thick ( iii ) 19mm thick ( iv ) 25mm thick a29 supplying of ply wood greenpanel or isi mark water proof ply grade including all materials, labour, taxes all complete as per building specification and direction of e / i. ( i ) 6mm thick ( ii ) 12mm thick ( iii ) 19mm thick ( iv ) 25mm thick a30 supplying, fitting, fixing of 8mm wooden flooring with premium quality plywood ( mikasa / action tesa / equivalent ) including labour all taxes and royalty all complete as per building specification and direction e / i. ( excluding gst, c.p & o.h.c ) a31 supplying, fitting, fixing of 12mm wooden flooring with premium quality plywood ( mikasa / action tesa / equivalent ) including labour all taxes and royalty all complete as per building specification and direction e / i. ( excluding gst, c.p & o.h.c ) a32 supplying, fitting, fixing of 8mm wooden flooring with high quality plywood ( mikasa / action tesa / equivalent ) including labour all taxes and royalty all complete as per building specification and direction e / i. ( excluding gst, c.p & o.h.c ) a33 supplying, fitting, fixing of 12mm wooden flooring with high quality plywood ( mikasa / action tesa / equivalent ) including labour all taxes and royalty all complete as per building specification and direction e / i. ( excluding gst, c.p & o.h.c ) a34 supplying, fitting, fixing of wall panelling with 12mm plywood ( century / green / equivalent ) with aluminium section 2x1, 4mm thick veneer and polishing with melamine polish including labour all taxes and royalty all complete as per building specification and direction e / i. a35 providing and fixing 12 mm thick plywood ( green ply / green panel ) on existing door frame and pasting with 4 mm veneer ( green decor ) with material and labour all complete ( including all fancy type fitting ) as per building specification and direction of e / i. a36 providing and fixing door shutter panelling for new door with 4mm veneer pasting ( green decor ) with material and labour all complete ( including all fancy type fitting ) as per building specification and direction of e / i. ( b ) tiles works b01 providing full colour body glazed vitrified tiles of size 400mm x 800mm with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., completeas per building specification and direction of e / i. make: kajaria, orient bell, somany b02 providing quartz slab with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., completeas per building specification and direction of e / i. make: kajaria, orient bell, somany b03 providing colour body glazed vitrified tiles of size 600mmx300mm in walls with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., completeas per building specification and direction of e / i. make: kajaria, orient bell, somany b04 providing quartz slab with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., completeas per building specification and direction of e / i. make: kajaria, orient bell, somany b05 providing machine cut, mirror polished italian marble stone flooring, in required design and in patterns in combination with italian marble stones of different colours, shades and finished surface texture of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 40 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with white cement slurry @ 4.4 kg / sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge ( c ) supply of prefab structure & steel items c01 supply of prefabricated file storage room of desired size with wall sun roofing of puf insulated sandwich panel including file rack, including civil work. continuous sandwich panels are single piece, prefabricated, modular, factory made units which consist of an insulating layer of rigid polyurethane foam between two layers of metal sheets. the panels comprise of puf bonded between two sheets of pre coated gi sheets of 0.5 mm thick to produce straight to finish panels. insulation core provides efective insulation and strong bonding for better structural stability to facilitate higher loading and wider spans. these panels are available for both wall and roof .the system can incorporate all types of architectural features like coving, boxes, cantievers, projections, infill walls, mezzanine floors etc. this system can also incorporate all types of services viz. electrical, gas and plumbing etc. the design and engineering of the structures is executed by following the norms & guidelines stipulated in relevant indian standards. c02 providing two coats of spray painting over steel surface including all taxes and royalty all complete as per building specification and direction e / i. c03 supplying of brass and steel letters with approved size, colour, model all complete as per direction of e / i. ( i ) jharkhand mantralaya ( 8 brass ) ( ii ) jharkhand mantralaya ( 8 steel ) ( iii ) logo of jharkhand government with vinyl coating ( 12 steel ) ( iv ) conference hall ( brass 2 ) ( v ) waiting room ( brass 2 ) ( vi ) name plate ( 12 x 8 ) ( vii ) logo of jharkhand government with vinyl coating ( 12 x 12 ) , ( 16 x 16 ) , ( 24 x 24 ) c04 supplying of solid brass letters with approved size, colour, model all complete as per direction of e / i. ( i ) government of jharkhand ( 5 brass, thickness 5mm ) ( ii ) झारखण्ड सरकार ( 6 brass, thickness 5mm ) c05 design , engineering, patterning, fabrication, supplying & installation in position of tensile membrane structure for entrance canopy as per detail specification. c06 terrace / flat awnings made of high quality aluminium alloy extrusions along with double side coated pvc fabric and complete fitting / mechanism along with m.s support sysytem, gear box and other components. c07 window awnings made of retractable canopy with supporting aluminium anodised member, components with double side coated pvc fabric etc complete. c08 window awnings & terrace / flat awnings installation and forwarding charge. ( d ) supply of furniture items d01 executive table size: 1600x900x750 with 3 drawer mobile pedestal and side return unit make durian model no: meridian / b d02 executive table size: 2000x900x750 with 3 drawer mobile pedestal and side return unit make durian model no: meridian d03 high back executive revolving chair make durian model no: marvel / hb d04 visitor chair make durian model no: bzt / 60102 d05 sofa set ( 3+1 ) in leatherite finish make durian model no: jesse color camel brown d06 1 seater sofa set in leatherite finish make durian model no: berry / 55001 / a / 1 d07 glass top centre table make durian model no: camron / ct d08 marble top centre table make durian model no: asher d09 sofa set ( 3+2 ) in leatherite finish make durian model no: lorraine d10 glass top side table magazine rack make durian model no: kyle / st d11 round side table make durian model no: gcl / 60605 d12 glass top side table with shelves make durian model no: zee / 34487 d13 side table make durian model no: nora / st d14 table lamp make durian model no: kemper d15 table lamp make durian model no: garter / b d16 executive visitor chair make durian model no: mmpl / 70004 d17 sofa set ( 3+1 ) make durian model no: skyler d18 side table make durian model no: nora / st d19 solid wood side table make durian model no: camron / st d20 office storage unit ( make durian model no : accord / a ) d21 executive medium back cantilever chair of dimension ( 610mmx505mmx990mm ) ( make durian model no:rich / 37816 ) d22 executive medium back cantilever chair of dimension ( 610mmx505mmx990mm ) ( make durian model no:mmpl / 70004 ) d23 side table ( make steller model no : frstpln ) d24 side cabinet ( make steller model no : oz715 ) d25 side table ( make steller model no: frst2825 ) d26 cubical glass with dorma fitting as per direction e / i. size 5 x 4 d27 corner table size: 14x14x18 including all materials. d28 centre table size: 40x10x16 including all materials. d29 tv showcase size: 18x21x26 including all materials. d30 succession board size: 40x34 including all materials. d31 wooden name plate size: 40x08 including all materials. ( e ) furniture fittings items e01 providing bright finished mortise latch & lock isi marked with six lever and pair of stainless steel handle with cylinder both side key option / one side knob & other side coin option including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. ( make gogrej, model no. neh 06 7117 ) e02 providing bright finished mortise latch & lock isi marked with six lever and pair of stainless steel handle with cylinder both side key option / one side knob & other side coin option all complete as per direction of e / i. ( model no.godraj neh 08 6763 ) e03 providing bright finished mortise latch & lock isi marked with six lever and pair of stainless steel handle with cylinder both side key option / one side knob & other side coin option including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. ( make gogrej, model no. neh 09 6687 ) e04 providing bright finished cylinder lock ( make godraj 5329 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e05 providing godrej hydraulic door closer ( makegodrej, model no : c071 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e06 providing bright finished brass handles with screws etc. complete: size: 200 mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e07 providing bright finished brass handles with screws etc. complete: size: 150 mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e08 providing bright finished brass handles with screws etc. complete: size: 125 mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e09 providing bright finished brass tower bolts ( barrel type ) with necessary screws etc. size: 150x10 mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e10 providing bright finished brass tower bolts ( barrel type ) with necessary screws etc. size: 250x 10mm mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e11 providing door hinges with necessary screws etc. including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e12 providing baby latch lock with necessary screws etc. including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e13 providing soft close drawer channel 300mm ( make:godrej, model no : godrej 7083 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e14 providing soft close drawer channel 350mm ( 14 ) ( make model no : godrej 7084 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e15 supplying godrej wardrobe soft hinge ( make godraj 7216 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e16 supplying stainless steel cabinet, kitchen, drawer wardrobe, door pull handle size 4 including materials, taxes and labour all complete as per building specification and direction of e / i. e17 supplying wardrobe lock ( make godraj 8086 ) including materials, taxes and labour all complete as per building specification and direction of e / i. e18 providing soft close drawer channel 450mm ( make model no : godrej 7086 including materials, taxes and labour all complete as per building specification and direction of e / i. e19 providing glass door bottom lock patch ( make:godrej model no : 7759 ) including materials, taxes and labour all complete as per building specification and direction of e / i. e20 providing glass door floor spring ( make:godrej, model no : godraj 5746 ) including materials, taxes and labour all complete as per building specification and direction of e / i. e21 providing glass door pull handle ( make:godrej, model no : 7272 ) including materials, taxes and labour all complete as per building specification and direction of e / i. e22 providing glass door connect patch ( make:godrej, model no : 7776 ) including materials, taxes and labour all complete as per building specification and direction of e / i. ( f ) blinds & curtains items f01 providing roller blind ( make model: marvel ) best quality of approved size including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. f02 supplying of roller blinds model: black out including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. f03 providing luzon blinds of approved size, colours & shades, to be fixed in jumbs, luzon blinds combine soft, seamless fabric with crisp even pleats that hold their shape indefinity, including all taxes and labour complete as per building specification and direction of e / i. f04 providing curtain in door & window including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. f05 supplying of green curtains ( doctor cloth ) of size 63x48 including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. f06 providing curtain of superior quality approved fabric material curtain & astar with rings , bukram , stiching charges making adequate plats fixing in prefixed curtain rod & power track as per direction of e / i curtain cloth make pure / dicitex / gmf ( g ) supply of electronics items g01 supplying of led t.v ( make: sony led tv 55 4k pro model no: kd 55x7500h in5 ) including materials, taxes and labour all complete as per building specification and direction of e / i. g02 supplying of led t.v ( make: sony led tv 75 model no: kd 75x8000h ) including materials, taxes and labour all complete as per building specification and direction of e / i. g03 supplying of led t.v ( make: sony led tv 43 model no: kdl43w6600 ) including materials, taxes and labour all complete as per building specification and direction of e / i. g04 supplying of led tv of approved size and capacity ( make model no. sony led klv 32w622g ) including materials, taxes and labour all complete as per building specification and direction of e / i. g05 providing instant water heater 3 ltr 3kw ( make model no: bajaj new majesty ) including materials, taxes and labour all complete as per building specification and direction of e / i. g06 supplying of air purifier of approved size and capacity ( make model no. forbes pro air purifier aeroguard 45 ) including materials, taxes and labour all complete as per building specification and direction of e / i. ( h ) supply items h01 providing of artificial grass including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of e / i. h02 providing pop made cornice in ceiling including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of e / i. h03 supplying of imported wallpaper ( make model: excel ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. h04 supplying of imported wallpaper ( make model: x treme ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. h05 providing black reflective film coating on glass window including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. h06 providing plaster of patta paris over plastered surface to prepare the surface even and smooth complete. h07 providing anti temite treatment wiih all labour and material all complete work as per instruction of e / i. h08 supplying red foot mat including materials, taxes and labour all complete as per building specification and direction of e / i. h09 supplying green foot mat of synthetic type including materials, taxes and labour all complete as per building specification and direction of e / i. h10 supplying bathroom mate ( make duro turf premium ) including materials, taxes and labour all complete as per building specification and direction of e / i. h11 supplying 12mm toughened glass including materials, taxes and labour all complete as per building specification and direction of e / i. h12 supplying 12mm plain glass including materials, taxes and labour all complete as per building specification and direction of e / i. h13 supply of parking stand of approved size, colour and design including materials, taxes and labour all complete as per building specification and direction of e / i. h14 supplying wall clock make: ajanta analog 32 cm x 32 cm including materials, taxes and labour all complete as per building specification and direction of e / i. h15 supplying wall clock make: ajanta ( model no. ajanta397ivory ) including materials, taxes and labour all complete as per building specification and direction of e / i. h16 supplying wall clock make: ajanta ( model no. 557 ) size: 762x57mm including materials, taxes and labour all complete as per building specification and direction of e / i. h17 supplying of acrylic sheet of approved size and colours, texture & shade including materials, taxes and labour all complete as per building specification and direction of e / i. h18 supplying coat hanger including materials, taxes and labour all complete as per building specification and direction of e / i. h19 supplying wooden stool including materials, taxes and labour all complete as per building specification and direction of e / i. h20 supply of wooden shelf ( 65x30x18 ) including materials, taxes and labour all complete as per building specification and direction of e / i. h21 supplying teakwood relax chair including materials, taxes and labour all complete as per building specification and direction of e / i. h22 supplying bamboo plant indoor in glass pot including materials, taxes and labour all complete as per building specification and direction of e / i. h23 supplying of designer flower pot handmade ceramic planter including materials, taxes and labour all complete as per building specification and direction of e / i. h24 providing artificial potted plant of approved size and colour for desk or table including materials, taxes and labour all complete as per building specification and direction of e / i. h25 providing carpet ( make model no : ocmcs2 ) in floor of approved size, quality and colour including materials, taxes and labour all complete as per building specification and direction of e / i. h26 supplying of serving tray including materials, taxes and labour all complete as per building specification and direction of e / i. h27 supplying of stainless steel mesh dustbins round shape – 10 liter including materials, taxes and labour all complete as per building specification and direction of e / i. h28 supplying of plastic dustbin with soft closing cover 12l including materials, taxes and labour all complete as per building specification and direction of e / i. h29 supplying of stainless steel paper bin pedal dustbin with bucket of size 10l including materials, taxes and labour all complete as per building specification and direction of e / i. h30 supplying of stainless steel paper bin pedal dustbin with bucket of size 20l including materials, taxes and labour all complete as per building specification and direction of e / i. h31 supplying of multicolour aquarium stone of approved size and colours, texture & shade including materials, taxes and labour all complete as per building specification and direction of e / i. h32 supplying of round 65 multipurpose lock ( make: link lock ) including materials, taxes and labour all complete as per building specification and direction of e / i. h33 supplying of thermosteel flip lid flask, 1000 milliliters, silver ( make: milton ) including materials, taxes and labour all complete as per building specification and direction of e / i. h34 supplying of t.v trolly of approved size, in all colours & shades including all taxes and royalty all complete as per building specification and direction e / i. h35 supplying of materials all complete as per direction of e / i. ( i ) lamp ( ii ) centrepiece carpet 26x50 ( iii ) flower pot small size ( iv ) flower pot big size ( v ) carpet ( size: 1.6mx1.7 m ) ( vi ) carpet ( size: 1.6mx2.3m ) ( vii ) carpet ( size: 1.2mx1.8m ) h36 supplying of materials for day to day maintenace work all complete as per direction of e / i. ( i ) glass or window cleaner ( ii ) bleaching powder ( iii ) floor cleaner ( lizol / dettol / equivalent ) ( iv ) odonil ( v ) nepthalin balls ( vi ) toilet cleaner ( harpic liquid ) ( vii ) stick broom ( viii ) phool broom ( ix ) plastic bucket ( 10ltr ) ( x ) plastic mug ( xi ) wet mop ( xii ) duster yellow ( xiii ) colin liquid ( xiv ) garbage waste dustbin capacity 40l ( xv ) hand wash liquid ( dettol / lifebuoy / equivalent ) ( xvi ) rubber gloves ( xvii ) wiper with rod ( xviii ) toilet brush ( xix ) jala brush with bamboo stick ( xx ) garbage bag ( xxi ) face mask ( xxii ) gum boots ( xxiii ) chakachak powder ( xxiv ) air freshener godrej aer spray h37 providing single disc scrubbing machine to clean floor surfaces of rooms, bathrooms, coridoor, lift, staicase etc. with safety precautions for to clean. all complete as per building specifications and direction of e / i. h38 providing walk behind auto scrubber cum drier machine to clean floor surfaces of rooms, bathrooms, coridoor, lift, staicase etc. with safety precautions for to clean. all complete as per building specifications and direction of e / i. h39 providing high jet pressure cleaner to clean chocked drain, courtyard area, bathrooms etc. with safety precautions for to clean. all complete as per building specifications and direction of e / i. h40 providing professional wet and dry vaccume cleaner machine to clean floor surfaces of rooms, bathrooms, coridoor, lift, staicase etc. with safety precautions for to clean. all complete as per building specifications and direction of e / i. h41 supply of national flag of size ( 300 x 200 ) in 100% shinny, knitted polyster ( 160gsm ) , all flags are disperse printed washable and durable as per the flag code and specification of the indian flag double stiched 3 side and 4th side sleeve with double hamming on all four side stiching for more durability uv protected colours individually packed in poly bag etc. as required. ( as sample received ) location of work: project building, mdi building, adb building, ffp building, conference hall & canteen building in the campus of jharkhand mantralaya at hec, dhurwa, ranchi and c type quarter at sachiwalay colony at hinoo, ranchi. ( j ) plumbing items j01 ewc with soft closing seat cover ( make hindware model no. agnese 92563 ) j02 ewc with soft closing seat cover ( make hindware model no. berlin 92563 ) j03 ewc with soft closing seat cover ( make hindware model no. vega 92548 ( s 30 ) ) j04 ewc with soft closing seat cover ( make hindware model no. malibu 20086 ( p 18 ) ) j05 ewc with soft closing seat cover ( make hindware model no. star s 20087 ( s 10 ) ) j06 ewc with soft closing seat cover ( make hindware model no. element 92082 ( s 30 ) ) j07 ewc with soft closing seat cover ( make hindware model no. olivia 92042 ( s 22 ) ) j08 ewc with soft closing seat cover ( make hindware model no. estella 92083 ( s 30 ) ) j09 ewc with soft closing seat cover ( make hindware model no. edge ( s 220 ) 92562 ) j10 ewc with soft closing seat cover ( make jaquar model no : sls wht 6855s ) j11 ewc with soft closing seat cover ( make jaquar model no. continental cns wht 755s220spp & cns wht 207 ) j12 iwc orissa pan ( make jaquar model no.cns wht 451 ) j13 wash basin pedestal ( make hindware model no : neptune, ped.11029 ) j14 wash basin with pedestal ( make hindware model no : 10001 standard, ped.11003 ) j15 urinal senser mini concealed type flushing valve ( make jaquar model no : snr stl 51083 ) j16 urinal ( make jaquar model no : urs wht 13263 ) j17 urinal ( make hindware model no : senso art 60018 ) j18 urinal ( make hindware model no : flow 60021 ) j19 squating ( make hindware model no : 60003 ) j20 auto closing concealed urinal flush valve ( make jaquar model no : prs chr 073 ) j21 counter top basin ( make jaquar model no : continental fls wht 5601 ) j22 corner wash basin ( make hindware model no : 10055, classic corner ) j23 corner basin ( make hindware make hindware model no : 10031, corner ) j24 pvc cistern ( make hindware, model: sleek smart ) j25 flush plates ( make jaquar model no. jcp chr 352415 ) j26 single piece slim concealed cistern body with installations kit & s type drain pipe connection set for wall hung wc ( without flush control plate ) ( make jaquar model no. jcs wht 2400s ) j27 single lever basin mixer ( make hindware model no : f440009 cora ) j28 pillar cock self closing ( make hindware model no : f310001acp ) j29 pillar cock auto closing system ( make jaquar model no : prs 031 ) j30 pillar cock ( make hindware model no : f440001 cora ) j31 pillar cock ( make hindware model no : quadra f380001 ) j32 pillar cock ( make hindware model no: contessa plus f330002 ) j33 pillar cock ( make hindware model no : f330012 ) j34 pillar cock ( make hindware model no : f740001 dove ) j35 pillar cock lift type ( make jaquar model no. flr 5015 ) j36 pillar cock ( make jaquar model no : flr chr 5011n ) j37 angular stop cock ( make hindware model no : f440005 ) j38 angular stop cock ( make hindware model no : quadra f380004 ) j39 angular stop cock ( make hindware model no : contessa plus f330043 ) j40 angular stop cock ( make hindware model no : f740039 dove ) j41 angular stop cock ( make jaquar model no. vgp chr 81053 ) j42 angular stop cock ( make jaquar model no : flr chr 5053n ) j43 angular stop cock ( make jaquar model no. con chr 059kn ) j44 angular stop 2 way for cistern and ewc ( make hindware model no : contessa plus f330006 ) j45 concealed stop cock with adjustable wall flange ( make hindware model no. f200007 ) j46 bib cock ( make jaquar model no. cqt chr 23037 ) j47 bib cock ( make jaquar model no. cqt chr 23037 ) j48 bib cock with wall flange ( make hindware model no : f740041 dove ) j49 bib cock with wall flange ( make hindware model no : f440003 ) j50 bib cock with wall flange ( make hindware model no : f330041 ) j51 2 way bib cock for health faucet ( make jaquar model no. cqt chr 23041 ) j52 2 way bib cock for health faucet ( make jaquar model no. cqt chr 23041 ) j53 2 way bib cock for health faucet ( make jaquar model no : flr chr 5041n ) j54 2 in 1 bib cock for health faucet ( make hindware model no : f440004 ) j55 2 way bib cock for health faucet ( make hindware model no : contessa plus f330004 ) j56 2 way bib cock ( make hindware model no: contessa plus f330006 ) j57 2 way bib cock for health faucet ( make hindware model no : f740004cp, dove ) j58 2 way bib cock for health faucet ( make hindware model no : quadra f380003 j59 2 way bib cock for health faucet ( make hindware model no : f330004scp ) j60 health faucet with 1 meter long easy flex tube & wall hook ( make jaquar model no : ald chr 573 ) j61 health faucet with 1 meter long easy flex tube & wall hook ( make hindware model no : f160002 ) j62 health faucet with 1 meter long easy flex tube & wall hook ( make hindware model no : f160068 ) j63 health faucet with 1 meter long easy flex tube & wall hook ( make hindware model no : f160001 ) j64 health faucet with 1 meter long easy flex tube & wall hook ( make hindware model no : f160023 ) j65 shower arm casted ( make jaquar model no. sha chr 477 ) j66 overhead shower ( make jaquar model no. eos ess 541rb ) j67 sink mixer wall mounted ( make jaquar model no. cqt cht 23309 ) j68 sink cock ( make hindware model no : f280012 flora ) j69 wall mixer ( make jaquar model no. cqt 23273upr ) j70 cera single lever faucets f1016721 chelsea high flow single lever concealed diverter ( make cera model no : exposed part f1016721, concealed part f4030101 ) j71 single lever exposed parts kits of hi flow divertor consisting of operating lever, wall flange ( with seals ) & button only ( make jaquar model no. ali 85079k ) j72 overhead shower with shower arm & wall flange ( make hindware model no : f160039 ) j73 bath tub spout ( make jaquar model no. spj chr 5429s ) j74 waste coupling ( make hindware model no : f860010 ) j75 waste coupling ( make jaquar model no : ald chr 709 ) j76 soft closing seat cover ( make jaquar model no : ars wht 39101uf ) j77 soap dish ( make jaquar model no. acn 1131n ) j78 soap dish ( make hindware model no : f890005 ) j79 soap dispenser with glass bottle ( make jaquar model no : acn 1135n ) j80 bottle trap ( make jaquar model no : ald whm 769l300x190 ) j81 bottle trap ( make hindware model no. f850003 ) j82 paper holder with cover ( make hindware model no : f840009 ) j83 toilet roll holder with flap ( make jaquar model no : acn chr 1153s ) j84 towel rack with lower hanger ( make hindware model no : acn 1581h ) j85 towel bar ( make jaquar model no : ahs chr 1501 ) j86 towel bar ( make jaquar model no : acn 1111sm ) j87 towel bar ( make hindware model no : f880005 ) j88 towel bar ( make hindware model no : f840013 ) j89 towel ring ( make hindware model no : f880007 ) j90 corner glass shelf ( make jaquar model no. acn 1173 ) j91 glass shelf ( make hindware model no. f880010 ) j92 glass shelf ( make jaquar model no. acn 1171n ) j93 counter top basin ( make jaquar model no : continental drs wht 37601 ) j94 single lever tall boy with 180mm extension body fixed spout ( make jaquar model no : vgp 81005nb ) j95 bib cock with wall flange ( make jaquar model no : vgp 81037 ) j96 angular stop cock ( make jaquar model no : vgp 81053 ) j97 2 in 1 bib cock for health faucet ( make jaquar model no : vgp 81041 ) ( k ) miscellaneous items wall clading / tile k01 providing and fixing vitrified tiles ( full body vitrified tiles ) wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineerin charge, in skirting, risers of steps and dados, over 12 mm thick bed ofchemical adhesive and jointing with grey cement slurry @ 3.3kg per sqm, providing 4mm spacing including pointing in epoxy groute with pigment of matching shade complete. size of tile oslo ocre matte vetrified 600 x 1200 mm k02 providing and fixing glazed vitrified tiles ( full body vitrified tiles ) floor tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineerin charge, in skirting, risers of steps and dados, over 12 mm thick bed ofchemical adhesive and jointing with grey cement slurry @ 3.3kg per sqm, providing 5mm spacer including pointing in epoxy groute with pigment of matching shade complete. size of tile nantes gray 600 x 1200 mm k03 providing and fixing glazed vitrified tiles ( full body vitrified tiles ) wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineerin charge, in skirting, risers of steps and dados, over 12 mm thick bed ofchemical adhesive and jointing with grey cement slurry @ 3.3kg per sqm, providing 5mm spacer including pointing in epoxy groute with pigment of matching shade complete. size of travitino bermni tile kajaria 600x1200 k04 providing and fixing glazed vitrified tiles ( full body vitrified tiles ) wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineerin charge, in skirting, risers of steps and dados, over 12 mm thick bed ofchemical adhesive and jointing with grey cement slurry @ 3.3kg per sqm, providing 5mm spacier including pointing in epoxy groute with pigment of matching shade complete. size of crystal bianco tile kajaria ( 600 x 1200 ) k05 providing and fixing glazed vitrified tiles ( full body vitrified tiles ) wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineerin charge, in skirting, risers of steps and dados, over 12 mm thick bed ofchemical adhesive and jointing with grey cement slurry @ 3.3kg per sqm, providing 5mm spacier including pointing in epoxy groute with pigment of matching shade complete. size of espania ocre kajaria ( 800 x 800 ) k06 flamed finish artifical engineered quartz marbel stone slab jet black, cherry red, elite brown, cat eye or equivalent. providing and laying polished artifical marbel stone flooring in required design and patternsall complete as per the architectural drawings, with 18 mm thick stone slab over complete as specified and as directed by the engineer in charge. door fitting k07 supply , fixing and fitting dead loock k08 supply , fixing and fitting handal 20 k09 supply , fixing and fitting concealed door closer k10 supply , fixing and fitting door stoper k11 supply , fixing and fitting tower bolt 12 k12 supply , fixing and fitting mortice lock k13 supply , fixing and fitting door silencer wooden work k14 supply of 4mm thick veener k15 supply 6mm b.w.p block board & plywood conforming to is:710 grade of approved make & brand ( green ply, century ply or equivalent as per direction of engineer k16 spply 12mm b.w.p block board & plywood conforming to is:710 grade of approved make & brand ( green ply, century ply or equivalent as per direction of engineer k17 spply 19mm b.w.p block board & plywood conforming to is:710 grade of approved make & brand ( green ply, century ply or equivalent as per direction of engineer k18 spply 30 mm flush door of ply wood century or isi mark water proof ply grade as per building specification and direction of e / i k19 supply 1mm leminate ( green ply, century ply or equivalent as per direction of engineer k20 supplying and fixing fabric accoustic padding with 6mm ply and 12mm foam k21 supplying and fixing d, dacor make letherite upholstery padding with 6mm ply and 12mm foam k22 supplying and installation of artist painting supply and installation furniture in the direction of e / i. k23 providing & fixing 2 seater sofa made out of pure teak wood in exposed portion , seat and back cushion made of 40 density / as required ultra resilient pu foam. top uphoulstry materilas from d décor / decitex as apporved by the engineer in charge k24 providing & fixing single seater sofa made out of pure teak wood in exposed portion , seat and back cushion made of 40 density / as required ultra resilient pu foam. top uphoulstry materilas from d décor / decitex as apporved by the engineer in charge k25 supplying and installation of dining chair k26 supplying and installation of fancy type dining chair k27 supplying and installation of center table planter box in the direction of e / i. ( make: kraft or equivalent ) k28 supplying and installation of center table planter box in the direction of e / i.flower flask 920 mm k29 supplying and installation of center table planter box in the direction of e / i.flower flask 750 mm k30 supplying and installation of center table planter box in the direction of e / i.flower flask 450 mm k31 supplying and installation of decoretive vase k32 supplying and fixing & fitting of window curtain in the direction of e / i. k33 supplying and fixing & fitting of window blind in the direction of e / i. k34 supplying and installation of center table carpet ( 5705 ) 5 in the direction of e / i. k35 supplying and installation of jharkhand map k36 supplying and installation foot mat k37 supplying and installation crystel stone glazzing / glass / item k38 supply tuffen glass ( 19 mm ) k39 supply tuffen glass ( 8 mm ) k40 supply mirror 8mm electrical item k41 supplying and installation smoke diductor k42 supplying and installation of 9w led coab light ( anchor , philips or equivlent ) in the direction of e / i. k43 supplying and installation of 7w ( ldo010 5005 ) polycab led coab light in the direction of e / i. k44 supplying and installation of 12w led coab light ( anchor , philips or equivlent ) in the direction of e / i. k45 supplying and installation of hanging light philips 58137 roseate pendant single ( 919215813302 ) in the direction of e / i. k46 supplying and installation of hanging light muscari pendent led al 1 x 45 .direction of e / i. k47 supplying and installation of hanging light fixture stellarbright 12w 1100 lme27 300k a60n ( 929001277913 ) ( philips or equivlent ) in the direction of e / i. k48 supplying and installation of hanging light fixture 24 dia decorative light ( philips or equivlent ) in the direction of e / i. k49 supplying and installation of exhaust fan bajaj ( 070049 ) 250mm venti ( bajaj , orient or equivlent ) in the direction of e / i. k50 supplying and installation of led strip ligth in the direction of e / i. k51 supplying and installation of fany type cilling fan electric 1200 mm aeroquiet fan white in the direction of e / i. k52 supplying and installation of sony klv 50w672g b led tv in the direction of e / i. k53 supplying and installation of tata sky in the direction of e / i. plumbing k54 supplying, fitting and fixing of counter top basin in the direction of e / i. ( make : jaquar ) ( fls wht 5601 ) k55 supplying, fitting and fixing of bottle trap in the direction of e / i. ( make : jaquar ) k56 supplying, fitting and fixing of angular stop cock in the direction of e / i. ( make : jaquar ) ( flr chr 5053n ) k57 supplying, fitting and fixing of pillar cock in the direction of e / i. ( make : jaquar ) ( flr chr 5011n ) k58 supplying, fitting and fixing of soap dispenser in the direction of e / i. ( make : jaquar ) k59 supplying, fitting and fixing of toilet roll holder in the direction of e / i. ( make : jaquar ) ( acn chr 1153s ) k60 supplying, fitting and fixing of c p west in the direction of e / i. k61 supplying, fitting and fixing of connection pipe in the direction of e / i. k62 supplying, fitting and fixing of cw542munw1 wall hung toilet ( ( make : toto ) k63 supplying, fitting and fixing of tc513aw slim seat & cover ( make : toto ) k64 supplying, fitting and fixing of l4706e#xw wash basin slim design w600 ( make : toto ) k65 supplying, fitting and fixing uswn925a#xw built in sensor equipped urinal ( make : toto ) k66 supplying, fitting and fixing of ka580007 ( health focet ) ( ( make : toto ) k67 supplying, fitting and fixing of kb 411005 ( two way bib tap hydrus ) ( ( make : toto ) k68 supplying, fitting and fixing of ka 870008 ( weste coupling ) ( ( make : toto ) k69 supplying, fitting and fixing of ka 870001 ( bottle trap ) ( ( make : toto ) k70 supplying, fitting and fixing of kb411003 ( angle valve hydrus ) ( ( make : toto ) k71 supplying, fitting and fixing of kb 320002rcp 32mm round flash valve ( ( make : toto ) k72 supplying, fitting and fixing of 611002 cp tall pillar tap ( ( make : toto ) crockery unit k73 supplying and installation of b / c 10 full plate 110 no. k74 supplying and installation of b / c 7 qtr plate 110 no. k75 supplying and installation of b / c soup bowl 110 no. k76 supplying and installation of b / c soup spoon 110 no. k77 supplying and installation of b / c donga 110 no. k78 supplying and installation of b / c saucer hw big 110 no. k79 supplying and installation of b / c saucer hw med 110 no. k80 supplying and installation of b / c rice bowl 110 k81 supplying and installation of b / c quarter plate 110 k82 supplying and installation of b / c cup & saucer mona 110 k83 supplying and installation of vip dssert ap spoon shine k84 supplying and installation of vip dssert ap fork shine k85 supplying and installation of vip dssert ap knife supreme k86 supplying and installation of vip tea spoon shine k87 supplying and installation of service fork vip shine k88 supplying and installation of service spoon vip shine k89 supplying and installation of b / c rice bowl 110 k90 supplying and installation of b / c curry bowl plain 7 k91 supplying and installation of b / c curry bowl 5 110 no. k92 supplying and installation of kent touchlesssanitiser dispencer k93 supplying and installation of budvashplain k94 supplying and installation of jug roxx jug 1.1 l k95 supplying and installation of ocean san marino 480ml k96 supplying and installation of table matt k97 supplying and installation of ss plantry 12 x 12 k98 supplying and installation of ss dustbean med jali k99 supplying and installation of ss napkin holder k100 supplying and installation of ocean new york 340ml k101 supplying and installation of sket tray 1216pt horticulture k102 supplying on site cycus treee k103 supplying on site saplera plant k104 supplying on site mini tagar hedge k105 supplying on site duranta hedge of flowering plants in verbena family l1 using hydra, crane and jcb to arrange vechiles in front of building sub division at project building, dhurwa. vechile was kept here and there which is arranging them in proper manner l2 wooden designer partition in four fold rate quoted per piece @ 32000.00 ( rs. thirty thow thousand only ) location of work: engineering hostel no 1 & 2 at hec, dhurwa, ranchi. ( a ) wooden works a01 supplying of door shutter and chaukhat panelling for new door with wooden framed of 12mm thick in choukhat and pasting 4mm thick veneer in both side all complete ( including all type of fancy fitting & royalty ) . ply board 12mm thick greenply, century or isi mark water proof ply grade, laminate: 4mm thick greenply / decowood veneer a02 supplying of door shutter and chaukhat panelling for old door with wooden framed of 12mm thick in choukhat, wooden framed of 6mm thick in door shutter and pasting 4mm thick veneer in both side all complete ( including all type of fancy fitting & royalty ) . ply board 12mm & 6mm thick greenply, century or isi mark water proof ply grade, laminate: 4mm thick greenply / decowood veneer a03 supplying of door shutter and choukhat panelling for new door with wooden framed of 12mm thick in choukhat and pasting 1mm thick sun mica in both side all complete ( including all type of fancy fitting & royalty ) . ply board 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / decowood sun mica a04 supplying of door shutter and choukhat panelling for old door with wooden framed of 12mm thick in choukhat, 6mm thick in door shutter and pasting 1mm thick sun mica in both side all complete ( including all type of fancy fitting & royalty ) . ply board 12mm & 6mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / decowood sun mica a05 supply of corner rack with 19mm thick ply, pasting 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick sunmica greenlam / centurylam, glass: 6mm plain glass furniture: godrej multipurpose lock. a06 supply of wall shelf with 19mm thick ply, pasting 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam. a07 supply of wooden ramp with 19mm thick ply 12mm thick wooden flooring ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, wooden flooring: 12mm thick wooden flooring a08 supply of wall rack / file cabinet with 19mm thick ply and pasting 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica a09 supply of wall rack / file cabinet with 19mm & 12mm thick ply and pasting 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica a10 supply of board wall partition ( wooden partition ) with 19mm thick ply, etching glass vertical standing position, framing with wooden bit, ply board both side shutering with 12 mm thick water proof century ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm &12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica glass: 6mm glass with etching design a11 supply of window rack with 19mm thick ply, 6mm thick plain glass and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica glass: 6mm plain glass a12 supply table / file desk with 19mm thick ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle : drawer handle, drawer channel : ball bearing drawer channel 400mm godrej a13 supply of modular kitchen cupboard with basket with 19mm thick ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, hinges & drawer channel : soft hinges & godrej drawer channel, handle: godrej, basket:hettich a14 supply of modular kitchen cupboard with 19mm and 12mm ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm and 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, hinges & drawer channel : soft hinges & godrej drawer channel, handle: godrej, a15 supply of modular kitchen cupboard with 19mm ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, hinges & drawer channel : soft hinges & godrej drawer channel, handle: godrej, a16 supply of kitchen rack with 19mm and 12mm ply, 6mm front etching design glass and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle: 4 handle, lock of furniture: godrej multipurpose lock. glass: 6mm glass with etching design a17 supply of kitchen rack with 19mm and 12mm ply, 6mm plain glass in rack and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle: 4 handle, lock of furniture: godrej multipurpose lock, glass: 6mm plain glass. a18 supply of coffee table with 19mm and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle: 4 handle, lock of furniture: godrej multipurpose lock. a19 supply of upper head cabinet cum rack or wall unit or file cabinet with 19mm and 12mm ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle: 4 handle, lock of furniture: godrej multipurpose lock. a20 supply of upper head cabinet cum rack or wall unit or file cabinet with 19mm ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, outside laminate: 1mm thick greenlam / centurylam, inside laminate: 0.8mm thick greenlam / centurylam, channel / soft closing hinge: hetich ( 202 s.s grade ) , lock of furniture : godrej / cent, handle / jali : brass / s.s finish handle, door closer: helix / ebco / hettich / yama ( 202 ss grade ) edge binding same laminate / p.v.c a21 supplying of ply board 19mm thick greenply ( green gold ) / century or isi mark water proof ply grade. ( i ) 4mm thick ( ii ) 6mm thick ( iii ) 12mm thick ( iv ) 19mm thick ( v ) 25mm thick ( vi ) 30mm thick a22 supplying of decowood 4mm thick veneer. ( i ) model: golden cedar 7661 ( ii ) model: apple tree 7172 ( iii ) model: bansal aromia 4507 ( iv ) model: oriental ash 7042 a23 supplying of greenlam laminate 1mm & 0.8mm thick spl finishes. ( i ) model: p10 ( 1mm thick ) ( ii ) model: hdg ( 1mm thick ) ( iii ) model: normal suede / solid / matt ( 1mm thick ) ( iv ) model: normal suede / matt / fancy ( 0.8mm thick ) ( v ) model: pearl ( 1924, 1923 ) / marker grade / chalk grade ( 0.8mm thick ) a24 supplying of all height wall panelling with 12 mm plywood ( green / optima / red ) over 2x1 aluminum section, 6 mm thick water proff veener and polish fininsh including all taxes and royalty all complete as per building specification and direction e / i. a25 supplying of wooden flooring 12mm plywood ( green / optima / red ) thick including all taxes and royalty all complete as per building specification and direction e / i. a26 providing anti temite treatment wiih all labour and material all complete work as per instruction of e / i. a27 supplying of ply wood greenply ( green gold ) or isi mark water proof ply grade including all materials, labour, taxes all complete as per building specification and direction of e / i. ( i ) 6mm thick ( ii ) 12mm thick ( iii ) 19mm thick ( iv ) 25mm thick a28 supplying of ply wood century or isi mark water proof ply grade including all materials, labour, taxes all complete as per building specification and direction of e / i. ( i ) 6mm thick ( ii ) 12mm thick ( iii ) 19mm thick ( iv ) 25mm thick a29 supplying of ply wood greenpanel or isi mark water proof ply grade including all materials, labour, taxes all complete as per building specification and direction of e / i. ( i ) 6mm thick ( ii ) 12mm thick ( iii ) 19mm thick ( iv ) 25mm thick ( b ) tiles works b01 providing full colour body glazed vitrified tiles of size 400mm x 800mm with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., completeas per building specification and direction of e / i. make: kajaria, orient bell, somany b02 providing quartz slab with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., completeas per building specification and direction of e / i. make: kajaria, orient bell, somany b03 providing colour body glazed vitrified tiles of size 600mmx300mm in walls with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., completeas per building specification and direction of e / i. make: kajaria, orient bell, somany b04 providing quartz slab with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., completeas per building specification and direction of e / i. make: kajaria, orient bell, somany b05 providing machine cut, mirror polished italian marble stone flooring, in required design and in patterns in combination with italian marble stones of different colours, shades and finished surface texture of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 40 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with white cement slurry @ 4.4 kg / sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge ( c ) supply of prefab structure & steel items c01 supply of prefabricated file storage room of desired size with wall sun roofing of puf insulated sandwich panel including file rack, including civil work. continuous sandwich panels are single piece, prefabricated, modular, factory made units which consist of an insulating layer of rigid polyurethane foam between two layers of metal sheets. the panels comprise of puf bonded between two sheets of pre coated gi sheets of 0.5 mm thick to produce straight to finish panels. insulation core provides efective insulation and strong bonding for better structural stability to facilitate higher loading and wider spans. these panels are available for both wall and roof .the system can incorporate all types of architectural features like coving, boxes, cantievers, projections, infill walls, mezzanine floors etc. this system can also incorporate all types of services viz. electrical, gas and plumbing etc. the design and engineering of the structures is executed by following the norms & guidelines stipulated in relevant indian standards do do all complete as per direction of e / i. c02 providing two coats of spray painting over steel surface including all taxes and royalty all complete as per building specification and direction e / i. c03 supplying of brass and steel letters with approved size, colour, model all complete as per direction of e / i. ( i ) jharkhand mantralaya ( 8 brass ) ( ii ) jharkhand mantralaya ( 8 steel ) ( iii ) logo of jharkhand government with vinyl coating ( 12 steel ) ( iv ) conference hall ( brass 2 ) ( v ) waiting room ( brass 2 ) ( vi ) name plate ( 12 x 8 ) ( vii ) logo of jharkhand government with vinyl coating ( 12 x 12 ) , ( 16 x 16 ) , ( 24 x 24 ) c04 supplying of solid brass letters with approved size, colour, model all complete as per direction of e / i. ( i ) government of jharkhand ( 5 brass, thickness 5mm ) ( ii ) झारखण्ड सरकार ( 6 brass, thickness 5mm ) ( d ) supply of furniture items d01 executive table size: 1600x900x750 with 3 drawer mobile pedestal and side return unit make durian model no: meridian / b d02 executive table size: 2000x900x750 with 3 drawer mobile pedestal and side return unit make durian model no: meridian d03 high back executive revolving chair make durian model no: marvel / hb d04 visitor chair make durian model no: bzt / 60102 d05 sofa set ( 3+1 ) in leatherite finish make durian model no: jesse color camel brown d06 1 seater sofa set in leatherite finish make durian model no: berry / 55001 / a / 1 d07 glass top centre table make durian model no: camron / ct d08 marble top centre table make durian model no: asher d09 sofa set ( 3+2 ) in leatherite finish make durian model no: lorraine d10 glass top side table magazine rack make durian model no: kyle / st d11 round side table make durian model no: gcl / 60605 d12 glass top side table with shelves make durian model no: zee / 34487 d13 side table make durian model no: nora / st d14 table lamp make durian model no: kemper d15 table lamp make durian model no: garter / b d16 executive visitor chair make durian model no: mmpl / 70004 d17 sofa set ( 3+1 ) make durian model no: skyler d18 side table make durian model no: nora / st d19 solid wood side table make durian model no: camron / st d20 office storage unit ( make durian model no : accord / a ) d21 executive medium back cantilever chair of dimension ( 610mmx505mmx990mm ) ( make durian model no:rich / 37816 ) d22 executive medium back cantilever chair of dimension ( 610mmx505mmx990mm ) ( make durian model no:mmpl / 70004 ) d23 side table ( make steller model no : frstpln ) d24 side cabinet ( make steller model no : oz715 ) d25 side table ( make steller model no: frst2825 ) d26 cubical glass with dorma fitting as per direction e / i. size 5 x 4 d27 corner table size: 14x14x18 including all materials. d28 centre table size: 40x10x16 including all materials. d29 tv showcase size: 18x21x26 including all materials. d30 succession board size: 40x34 including all materials. d31 wooden name plate size: 40x08 including all materials. ( e ) furniture fittings items e01 providing bright finished mortise latch & lock isi marked with six lever and pair of stainless steel handle with cylinder both side key option / one side knob & other side coin option including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. ( make gogrej, model no. neh 06 7117 ) e02 providing bright finished mortise latch & lock isi marked with six lever and pair of stainless steel handle with cylinder both side key option / one side knob & other side coin option all complete as per direction of e / i. ( model no.godraj neh 08 6763 ) e03 providing bright finished mortise latch & lock isi marked with six lever and pair of stainless steel handle with cylinder both side key option / one side knob & other side coin option including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. ( make gogrej, model no. neh 09 6687 ) e04 providing bright finished cylinder lock ( make godraj 5329 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e05 providing godrej hydraulic door closer ( makegodrej, model no : c071 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e06 providing bright finished brass handles with screws etc. complete: size: 200 mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e07 providing bright finished brass handles with screws etc. complete: size: 150 mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e08 providing bright finished brass handles with screws etc. complete: size: 125 mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e09 providing bright finished brass tower bolts ( barrel type ) with necessary screws etc. size: 150x10 mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e10 providing bright finished brass tower bolts ( barrel type ) with necessary screws etc. size: 250x 10mm mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e11 providing door hinges with necessary screws etc. including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e12 providing baby latch lock with necessary screws etc. including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e13 providing soft close drawer channel 300mm ( make:godrej, model no : godrej 7083 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e14 providing soft close drawer channel 350mm ( 14 ) ( make model no : godrej 7084 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e15 supplying godrej wardrobe soft hinge ( make godraj 7216 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e16 supplying stainless steel cabinet, kitchen, drawer wardrobe, door pull handle size 4 including materials, taxes and labour all complete as per building specification and direction of e / i. e17 supplying wardrobe lock ( make godraj 8086 ) including materials, taxes and labour all complete as per building specification and direction of e / i. e18 providing soft close drawer channel 450mm ( make model no : godrej 7086 including materials, taxes and labour all complete as per building specification and direction of e / i. e19 providing glass door bottom lock patch ( make:godrej model no : 7759 ) including materials, taxes and labour all complete as per building specification and direction of e / i. e20 providing glass door floor spring ( make:godrej, model no : godraj 5746 ) including materials, taxes and labour all complete as per building specification and direction of e / i. e21 providing glass door pull handle ( make:godrej, model no : 7272 ) including materials, taxes and labour all complete as per building specification and direction of e / i. e22 providing glass door connect patch ( make:godrej, model no : 7776 ) including materials, taxes and labour all complete as per building specification and direction of e / i. ( f ) blinds & curtains items f01 providing roller blind ( make model: marvel ) best quality of approved size including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. f02 supplying of roller blinds model: black out including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. f03 providing luzon blinds of approved size, colours & shades, to be fixed in jumbs, luzon blinds combine soft, seamless fabric with crisp even pleats that hold their shape indefinity, including all taxes and labour complete as per building specification and direction of e / i. f04 providing curtain in door & window including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. f05 supplying of green curtains ( doctor cloth ) of size 63x48 including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. f06 providing curtain of superior quality approved fabric material curtain & astar with rings , bukram , stiching charges making adequate plats fixing in prefixed curtain rod & power track as per direction of e / i curtain cloth make pure / dicitex / gmf ( g ) supply of electronics items g01 supplying of led t.v ( make: sony led tv 55 4k pro model no: kd 55x7500h in5 ) including materials, taxes and labour all complete as per building specification and direction of e / i. g02 supplying of led t.v ( make: sony led tv 75 model no: kd 75x8000h ) including materials, taxes and labour all complete as per building specification and direction of e / i. g03 supplying of led t.v ( make: sony led tv 43 model no: kdl43w6600 ) including materials, taxes and labour all complete as per building specification and direction of e / i. g04 supplying of led tv of approved size and capacity ( make model no. sony led klv 32w622g ) including materials, taxes and labour all complete as per building specification and direction of e / i. g05 providing instant water heater 3 ltr 3kw ( make model no: bajaj new majesty ) including materials, taxes and labour all complete as per building specification and direction of e / i. g06 supplying of air purifier of approved size and capacity ( make model no. forbes pro air purifier aeroguard 45 ) including materials, taxes and labour all complete as per building specification and direction of e / i. ( h ) supply items h01 providing of artificial grass including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of e / i. h02 providing pop made cornice in ceiling including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of e / i. h03 supplying of imported wallpaper ( make model: excel ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. h04 supplying of imported wallpaper ( make model: x treme ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. h05 providing black reflective film coating on glass window including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. h06 providing plaster of patta paris over plastered surface to prepare the surface even and smooth complete. h07 providing anti temite treatment wiih all labour and material all complete work as per instruction of e / i. h08 supplying red foot mat including materials, taxes and labour all complete as per building specification and direction of e / i. h09 supplying green foot mat of synthetic type including materials, taxes and labour all complete as per building specification and direction of e / i. h10 supplying bathroom mate ( make duro turf premium ) including materials, taxes and labour all complete as per building specification and direction of e / i. h11 supplying 12mm toughened glass including materials, taxes and labour all complete as per building specification and direction of e / i. h12 supplying 12mm plain glass including materials, taxes and labour all complete as per building specification and direction of e / i. h13 supply of parking stand of approved size, colour and design including materials, taxes and labour all complete as per building specification and direction of e / i. h14 supplying wall clock make: ajanta analog 32 cm x 32 cm including materials, taxes and labour all complete as per building specification and direction of e / i. h15 supplying wall clock make: ajanta ( model no. ajanta397ivory ) including materials, taxes and labour all complete as per building specification and direction of e / i. h16 supplying wall clock make: ajanta ( model no. 557 ) size: 762x57mm including materials, taxes and labour all complete as per building specification and direction of e / i. h17 supplying of acrylic sheet of approved size and colours, texture & shade including materials, taxes and labour all complete as per building specification and direction of e / i. h18 supplying coat hanger including materials, taxes and labour all complete as per building specification and direction of e / i. h19 supplying wooden stool including materials, taxes and labour all complete as per building specification and direction of e / i. h20 supply of wooden shelf ( 65x30x18 ) including materials, taxes and labour all complete as per building specification and direction of e / i. h21 supplying teakwood relax chair including materials, taxes and labour all complete as per building specification and direction of e / i. h22 supplying bamboo plant indoor in glass pot including materials, taxes and labour all complete as per building specification and direction of e / i. h23 supplying of designer flower pot handmade ceramic planter including materials, taxes and labour all complete as per building specification and direction of e / i. h24 providing artificial potted plant of approved size and colour for desk or table including materials, taxes and labour all complete as per building specification and direction of e / i. h25 providing carpet ( make model no : ocmcs2 ) in floor of approved size, quality and colour including materials, taxes and labour all complete as per building specification and direction of e / i. h26 supplying of serving tray including materials, taxes and labour all complete as per building specification and direction of e / i. h27 supplying of stainless steel mesh dustbins round shape – 10 liter including materials, taxes and labour all complete as per building specification and direction of e / i. h28 supplying of plastic dustbin with soft closing cover 12l including materials, taxes and labour all complete as per building specification and direction of e / i. h29 supplying of stainless steel paper bin pedal dustbin with bucket of size 10l including materials, taxes and labour all complete as per building specification and direction of e / i. h30 supplying of stainless steel paper bin pedal dustbin with bucket of size 20l including materials, taxes and labour all complete as per building specification and direction of e / i. h31 supplying of multicolour aquarium stone of approved size and colours, texture & shade including materials, taxes and labour all complete as per building specification and direction of e / i. h32 supplying of round 65 multipurpose lock ( make: link lock ) including materials, taxes and labour all complete as per building specification and direction of e / i. h33 supplying of thermosteel flip lid flask, 1000 milliliters, silver ( make: milton ) including materials, taxes and labour all complete as per building specification and direction of e / i. h34 supplying of t.v trolly of approved size, in all colours & shades including all taxes and royalty all complete as per building specification and direction e / i. h35 supplying of materials all complete as per direction of e / i. ( i ) lamp ( ii ) centrepiece carpet 26x50 ( iii ) flower pot small size ( iv ) flower pot big size ( v ) carpet ( size: 1.6mx1.7 m ) ( vi ) carpet ( size: 1.6mx2.3m ) ( vii ) carpet ( size: 1.2mx1.8m ) h36 supplying of materials for day to day maintenace work all complete as per direction of e / i. ( i ) glass or window cleaner ( ii ) bleaching powder ( iii ) floor cleaner ( lizol / dettol / equivalent ) ( iv ) odonil ( v ) nepthalin balls ( vi ) toilet cleaner ( harpic liquid ) ( vii ) stick broom ( viii ) phool broom ( ix ) plastic bucket ( 10ltr ) ( x ) plastic mug ( xi ) wet mop ( xii ) duster yellow ( xiii ) colin liquid ( xiv ) garbage waste dustbin capacity 40l ( xv ) hand wash liquid ( dettol / lifebuoy / equivalent ) ( xvi ) rubber gloves ( xvii ) wiper with rod ( xviii ) toilet brush ( xix ) jala brush with bamboo stick ( xx ) garbage bag ( xxi ) face mask ( xxii ) gum boots ( xxiii ) chakachak powder ( xxiv ) air freshener godrej aer spray h37 providing single disc scrubbing machine to clean floor surfaces of rooms, bathrooms, coridoor, lift, staicase etc. with safety precautions for to clean. all complete as per building specifications and direction of e / i. h38 providing walk behind auto scrubber cum drier machine to clean floor surfaces of rooms, bathrooms, coridoor, lift, staicase etc. with safety precautions for to clean. all complete as per building specifications and direction of e / i. h39 providing high jet pressure cleaner to clean chocked drain, courtyard area, bathrooms etc. with safety precautions for to clean. all complete as per building specifications and direction of e / i. h40 providing professional wet and dry vaccume cleaner machine to clean floor surfaces of rooms, bathrooms, coridoor, lift, staicase etc. with safety precautions for to clean. all complete as per building specifications and direction of e / i. h41 supply of national flag of size ( 300 x 200 ) in 100% shinny, knitted polyster ( 160gsm ) , all flags are disperse printed washable and durable as per the flag code and specification of the indian flag double stiched 3 side and 4th side sleeve with double hamming on all four side stiching for more durability uv protected colours individually packed in poly bag etc. as required. ( as sample received ) location of work: engineering hostel no 1 & 2 at hec, dhurwa, ranchi. ( j ) plumbing items j01 ewc with soft closing seat cover ( make hindware model no. agnese 92563 ) j02 ewc with soft closing seat cover ( make hindware model no. berlin 92563 ) j03 ewc with soft closing seat cover ( make hindware model no. vega 92548 ( s 30 ) ) j04 ewc with soft closing seat cover ( make hindware model no. malibu 20086 ( p 18 ) ) j05 ewc with soft closing seat cover ( make hindware model no. star s 20087 ( s 10 ) ) j06 ewc with soft closing seat cover ( make hindware model no. element 92082 ( s 30 ) ) j07 ewc with soft closing seat cover ( make hindware model no. olivia 92042 ( s 22 ) ) j08 ewc with soft closing seat cover ( make hindware model no. estella 92083 ( s 30 ) ) j09 ewc with soft closing seat cover ( make hindware model no. edge ( s 220 ) 92562 ) j10 ewc with soft closing seat cover ( make jaquar model no : sls wht 6855s ) j11 ewc with soft closing seat cover ( make jaquar model no. continental cns wht 755s220spp & cns wht 207 ) j12 iwc orissa pan ( make jaquar model no.cns wht 451 ) j13 wash basin pedestal ( make hindware model no : neptune, ped.11029 ) j14 wash basin with pedestal ( make hindware model no : 10001 standard, ped.11003 ) j15 urinal senser mini concealed type flushing valve ( make jaquar model no : snr stl 51083 ) j16 urinal ( make jaquar model no : urs wht 13263 ) j17 urinal ( make hindware model no : senso art 60018 ) j18 urinal ( make hindware model no : flow 60021 ) j19 squating ( make hindware model no : 60003 ) j20 auto closing concealed urinal flush valve ( make jaquar model no : prs chr 073 ) j21 counter top basin ( make jaquar model no : continental fls wht 5601 ) j22 corner wash basin ( make hindware model no : 10055, classic corner ) j23 corner basin ( make hindware make hindware model no : 10031, corner ) j24 pvc cistern ( make hindware, model: sleek smart ) j25 flush plates ( make jaquar model no. jcp chr 352415 ) j26 single piece slim concealed cistern body with installations kit & s type drain pipe connection set for wall hung wc ( without flush control plate ) ( make jaquar model no. jcs wht 2400s ) j27 single lever basin mixer ( make hindware model no : f440009 cora ) j28 pillar cock self closing ( make hindware model no : f310001acp ) j29 pillar cock auto closing system ( make jaquar model no : prs 031 ) j30 pillar cock ( make hindware model no : f440001 cora ) j31 pillar cock ( make hindware model no : quadra f380001 ) j32 pillar cock ( make hindware model no: contessa plus f330002 ) j33 pillar cock ( make hindware model no : f330012 ) j34 pillar cock ( make hindware model no : f740001 dove ) j35 pillar cock lift type ( make jaquar model no. flr 5015 ) j36 pillar cock ( make jaquar model no : flr chr 5011n ) j37 angular stop cock ( make hindware model no : f440005 ) j38 angular stop cock ( make hindware model no : quadra f380004 ) j39 angular stop cock ( make hindware model no : contessa plus f330043 ) j40 angular stop cock ( make hindware model no : f740039 dove ) j41 angular stop cock ( make jaquar model no. vgp chr 81053 ) j42 angular stop cock ( make jaquar model no : flr chr 5053n ) j43 angular stop cock ( make jaquar model no. con chr 059kn ) j44 angular stop 2 way for cistern and ewc ( make hindware model no : contessa plus f330006 ) j45 concealed stop cock with adjustable wall flange ( make hindware model no. f200007 ) j46 bib cock ( make jaquar model no. cqt chr 23037 ) j47 bib cock ( make jaquar model no. cqt chr 23037 ) j48 bib cock with wall flange ( make hindware model no : f740041 dove ) j49 bib cock with wall flange ( make hindware model no : f440003 ) j50 bib cock with wall flange ( make hindware model no : f330041 ) j51 2 way bib cock for health faucet ( make jaquar model no. cqt chr 23041 ) j52 2 way bib cock for health faucet ( make jaquar model no. cqt chr 23041 ) j53 2 way bib cock for health faucet ( make jaquar model no : flr chr 5041n ) j54 2 in 1 bib cock for health faucet ( make hindware model no : f440004 ) j55 2 way bib cock for health faucet ( make hindware model no : contessa plus f330004 ) j56 2 way bib cock ( make hindware model no: contessa plus f330006 ) j57 2 way bib cock for health faucet ( make hindware model no : f740004cp, dove ) j58 2 way bib cock for health faucet ( make hindware model no : quadra f380003 j59 2 way bib cock for health faucet ( make hindware model no : f330004scp ) j60 health faucet with 1 meter long easy flex tube & wall hook ( make jaquar model no : ald chr 573 ) j61 health faucet with 1 meter long easy flex tube & wall hook ( make hindware model no : f160002 ) j62 health faucet with 1 meter long easy flex tube & wall hook ( make hindware model no : f160068 ) j63 health faucet with 1 meter long easy flex tube & wall hook ( make hindware model no : f160001 ) j64 health faucet with 1 meter long easy flex tube & wall hook ( make hindware model no : f160023 ) j65 shower arm casted ( make jaquar model no. sha chr 477 ) j66 overhead shower ( make jaquar model no. eos ess 541rb ) j67 sink mixer wall mounted ( make jaquar model no. cqt cht 23309 ) j68 sink cock ( make hindware model no : f280012 flora ) j69 wall mixer ( make jaquar model no. cqt 23273upr ) j70 cera single lever faucets f1016721 chelsea high flow single lever concealed diverter ( make cera model no : exposed part f1016721, concealed part f4030101 ) j71 single lever exposed parts kits of hi flow divertor consisting of operating lever, wall flange ( with seals ) & button only ( make jaquar model no. ali 85079k ) j72 overhead shower with shower arm & wall flange ( make hindware model no : f160039 ) j73 bath tub spout ( make jaquar model no. spj chr 5429s ) j74 waste coupling ( make hindware model no : f860010 ) j75 waste coupling ( make jaquar model no : ald chr 709 ) j76 soft closing seat cover ( make jaquar model no : ars wht 39101uf ) j77 soap dish ( make jaquar model no. acn 1131n ) j78 soap dish ( make hindware model no : f890005 ) j79 soap dispenser with glass bottle ( make jaquar model no : acn 1135n ) j80 bottle trap ( make jaquar model no : ald whm 769l300x190 ) j81 bottle trap ( make hindware model no. f850003 ) j82 paper holder with cover ( make hindware model no : f840009 ) j83 toilet roll holder with flap ( make jaquar model no : acn chr 1153s ) j84 towel rack with lower hanger ( make hindware model no : acn 1581h ) j85 towel bar ( make jaquar model no : ahs chr 1501 ) j86 towel bar ( make jaquar model no : acn 1111sm ) j87 towel bar ( make hindware model no : f880005 ) j88 towel bar ( make hindware model no : f840013 ) j89 towel ring ( make hindware model no : f880007 ) j90 corner glass shelf ( make jaquar model no. acn 1173 ) j91 glass shelf ( make hindware model no. f880010 ) j92 glass shelf ( make jaquar model no. acn 1171n ) j93 counter top basin ( make jaquar model no : continental drs wht 37601 ) j94 single lever tall boy with 180mm extension body fixed spout ( make jaquar model no : vgp 81005nb ) j95 bib cock with wall flange ( make jaquar model no : vgp 81037 ) j96 angular stop cock ( make jaquar model no : vgp 81053 ) j97 2 in 1 bib cock for health faucet ( make jaquar model no : vgp 81041 ) location of work: e type & f type qtr. at hec, dhurwa, ranchi. ( a ) wooden works a01 supplying of door shutter and chaukhat panelling for new door with wooden framed of 12mm thick in choukhat and pasting 4mm thick veneer in both side all complete ( including all type of fancy fitting & royalty ) . ply board 12mm thick greenply, century or isi mark water proof ply grade, laminate: 4mm thick greenply / decowood veneer a02 supplying of door shutter and chaukhat panelling for old door with wooden framed of 12mm thick in choukhat, wooden framed of 6mm thick in door shutter and pasting 4mm thick veneer in both side all complete ( including all type of fancy fitting & royalty ) . ply board 12mm & 6mm thick greenply, century or isi mark water proof ply grade, laminate: 4mm thick greenply / decowood veneer a03 supplying of door shutter and choukhat panelling for new door with wooden framed of 12mm thick in choukhat and pasting 1mm thick sun mica in both side all complete ( including all type of fancy fitting & royalty ) . ply board 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / decowood sun mica a04 supplying of door shutter and choukhat panelling for old door with wooden framed of 12mm thick in choukhat, 6mm thick in door shutter and pasting 1mm thick sun mica in both side all complete ( including all type of fancy fitting & royalty ) . ply board 12mm & 6mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / decowood sun mica a05 supply of corner rack with 19mm thick ply, pasting 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick sunmica greenlam / centurylam, glass: 6mm plain glass furniture: godrej multipurpose lock. a06 supply of wall shelf with 19mm thick ply, pasting 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam. a07 supply of wooden ramp with 19mm thick ply 12mm thick wooden flooring ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, wooden flooring: 12mm thick wooden flooring a08 supply of wall rack / file cabinet with 19mm thick ply and pasting 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica a09 supply of wall rack / file cabinet with 19mm & 12mm thick ply and pasting 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica a10 supply of board wall partition ( wooden partition ) with 19mm thick ply, etching glass vertical standing position, framing with wooden bit, ply board both side shutering with 12 mm thick water proof century ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm &12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica glass: 6mm glass with etching design a11 supply of window rack with 19mm thick ply, 6mm thick plain glass and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica glass: 6mm plain glass a12 supply table / file desk with 19mm thick ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle : drawer handle, drawer channel : ball bearing drawer channel 400mm godrej a13 supply of modular kitchen cupboard with basket with 19mm thick ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, hinges & drawer channel : soft hinges & godrej drawer channel, handle: godrej, basket:hettich a14 supply of modular kitchen cupboard with 19mm and 12mm ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm and 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, hinges & drawer channel : soft hinges & godrej drawer channel, handle: godrej, a15 supply of modular kitchen cupboard with 19mm ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, hinges & drawer channel : soft hinges & godrej drawer channel, handle: godrej, a16 supply of kitchen rack with 19mm and 12mm ply, 6mm front etching design glass and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle: 4 handle, lock of furniture: godrej multipurpose lock. glass: 6mm glass with etching design a17 supply of kitchen rack with 19mm and 12mm ply, 6mm plain glass in rack and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle: 4 handle, lock of furniture: godrej multipurpose lock, glass: 6mm plain glass. a18 supply of coffee table with 19mm and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle: 4 handle, lock of furniture: godrej multipurpose lock. a19 supply of upper head cabinet cum rack or wall unit or file cabinet with 19mm and 12mm ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm & 12mm thick greenply, century or isi mark water proof ply grade, laminate: 1mm thick greenlam / centurylam sun mica, handle: 4 handle, lock of furniture: godrej multipurpose lock. a20 supply of upper head cabinet cum rack or wall unit or file cabinet with 19mm ply and laminate with 1mm thick sun mica ( including all type of fancy fitting & royalty ) . ply board 19mm thick greenply, century or isi mark water proof ply grade, outside laminate: 1mm thick greenlam / centurylam, inside laminate: 0.8mm thick greenlam / centurylam, channel / soft closing hinge: hetich ( 202 s.s grade ) , lock of furniture : godrej / cent, handle / jali : brass / s.s finish handle, door closer: helix / ebco / hettich / yama ( 202 ss grade ) edge binding same laminate / p.v.c a21 supplying of ply board 19mm thick greenply ( green gold ) / century or isi mark water proof ply grade. ( i ) 4mm thick ( ii ) 6mm thick ( iii ) 12mm thick ( iv ) 19mm thick ( v ) 25mm thick ( vi ) 30mm thick a22 supplying of decowood 4mm thick veneer. ( i ) model: golden cedar 7661 ( ii ) model: apple tree 7172 ( iii ) model: bansal aromia 4507 ( iv ) model: oriental ash 7042 a23 supplying of greenlam laminate 1mm & 0.8mm thick spl finishes. ( i ) model: p10 ( 1mm thick ) ( ii ) model: hdg ( 1mm thick ) ( iii ) model: normal suede / solid / matt ( 1mm thick ) ( iv ) model: normal suede / matt / fancy ( 0.8mm thick ) ( v ) model: pearl ( 1924, 1923 ) / marker grade / chalk grade ( 0.8mm thick ) a24 supplying of all height wall panelling with 12 mm plywood ( green / optima / red ) over 2x1 aluminum section, 6 mm thick water proff veener and polish fininsh including all taxes and royalty all complete as per building specification and direction e / i. a25 supplying of wooden flooring 12mm plywood ( green / optima / red ) thick including all taxes and royalty all complete as per building specification and direction e / i. a26 providing anti temite treatment wiih all labour and material all complete work as per instruction of e / i. a27 supplying of ply wood greenply ( green gold ) or isi mark water proof ply grade including all materials, labour, taxes all complete as per building specification and direction of e / i. ( i ) 6mm thick ( ii ) 12mm thick ( iii ) 19mm thick ( iv ) 25mm thick a28 supplying of ply wood century or isi mark water proof ply grade including all materials, labour, taxes all complete as per building specification and direction of e / i. ( i ) 6mm thick ( ii ) 12mm thick ( iii ) 19mm thick ( iv ) 25mm thick a29 supplying of ply wood greenpanel or isi mark water proof ply grade including all materials, labour, taxes all complete as per building specification and direction of e / i. ( i ) 6mm thick ( ii ) 12mm thick ( iii ) 19mm thick ( iv ) 25mm thick ( b ) tiles works b01 providing full colour body glazed vitrified tiles of size 400mm x 800mm with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., completeas per building specification and direction of e / i. make: kajaria, orient bell, somany b02 providing quartz slab with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., completeas per building specification and direction of e / i. make: kajaria, orient bell, somany b03 providing colour body glazed vitrified tiles of size 600mmx300mm in walls with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., completeas per building specification and direction of e / i. make: kajaria, orient bell, somany b04 providing quartz slab with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., completeas per building specification and direction of e / i. make: kajaria, orient bell, somany b05 providing machine cut, mirror polished italian marble stone flooring, in required design and in patterns in combination with italian marble stones of different colours, shades and finished surface texture of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 40 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with white cement slurry @ 4.4 kg / sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge ( c ) supply of prefab structure & steel items c01 supply of prefabricated file storage room of desired size with wall sun roofing of puf insulated sandwich panel including file rack, including civil work. continuous sandwich panels are single piece, prefabricated, modular, factory made units which consist of an insulating layer of rigid polyurethane foam between two layers of metal sheets. the panels comprise of puf bonded between two sheets of pre coated gi sheets of 0.5 mm thick to produce straight to finish panels. insulation core provides efective insulation and strong bonding for better structural stability to facilitate higher loading and wider spans. these panels are available for both wall and roof .the system can incorporate all types of architectural features like coving, boxes, cantievers, projections, infill walls, mezzanine floors etc. this system can also incorporate all types of services viz. electrical, gas and plumbing etc. the design and engineering of the structures is executed by following the norms & guidelines stipulated in relevant indian standards do do all complete as per direction of e / i. c02 providing two coats of spray painting over steel surface including all taxes and royalty all complete as per building specification and direction e / i. c03 supplying of brass and steel letters with approved size, colour, model all complete as per direction of e / i. ( i ) jharkhand mantralaya ( 8 brass ) ( ii ) jharkhand mantralaya ( 8 steel ) ( iii ) logo of jharkhand government with vinyl coating ( 12 steel ) ( iv ) conference hall ( brass 2 ) ( v ) waiting room ( brass 2 ) ( vi ) name plate ( 12 x 8 ) ( vii ) logo of jharkhand government with vinyl coating ( 12 x 12 ) , ( 16 x 16 ) , ( 24 x 24 ) c04 supplying of solid brass letters with approved size, colour, model all complete as per direction of e / i. ( i ) government of jharkhand ( 5 brass, thickness 5mm ) ( ii ) झारखण्ड सरकार ( 6 brass, thickness 5mm ) ( d ) supply of furniture items d01 executive table size: 1600x900x750 with 3 drawer mobile pedestal and side return unit make durian model no: meridian / b d02 executive table size: 2000x900x750 with 3 drawer mobile pedestal and side return unit make durian model no: meridian d03 high back executive revolving chair make durian model no: marvel / hb d04 visitor chair make durian model no: bzt / 60102 d05 sofa set ( 3+1 ) in leatherite finish make durian model no: jesse color camel brown d06 1 seater sofa set in leatherite finish make durian model no: berry / 55001 / a / 1 d07 glass top centre table make durian model no: camron / ct d08 marble top centre table make durian model no: asher d09 sofa set ( 3+2 ) in leatherite finish make durian model no: lorraine d10 glass top side table magazine rack make durian model no: kyle / st d11 round side table make durian model no: gcl / 60605 d12 glass top side table with shelves make durian model no: zee / 34487 d13 side table make durian model no: nora / st d14 table lamp make durian model no: kemper d15 table lamp make durian model no: garter / b d16 executive visitor chair make durian model no: mmpl / 70004 d17 sofa set ( 3+1 ) make durian model no: skyler d18 side table make durian model no: nora / st d19 solid wood side table make durian model no: camron / st d20 office storage unit ( make durian model no : accord / a ) d21 executive medium back cantilever chair of dimension ( 610mmx505mmx990mm ) ( make durian model no:rich / 37816 ) d22 executive medium back cantilever chair of dimension ( 610mmx505mmx990mm ) ( make durian model no:mmpl / 70004 ) d23 side table ( make steller model no : frstpln ) d24 side cabinet ( make steller model no : oz715 ) d25 side table ( make steller model no: frst2825 ) d26 cubical glass with dorma fitting as per direction e / i. size 5 x 4 d27 corner table size: 14x14x18 including all materials. d28 centre table size: 40x10x16 including all materials. d29 tv showcase size: 18x21x26 including all materials. d30 succession board size: 40x34 including all materials. d31 wooden name plate size: 40x08 including all materials. ( e ) furniture fittings items e01 providing bright finished mortise latch & lock isi marked with six lever and pair of stainless steel handle with cylinder both side key option / one side knob & other side coin option including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. ( make gogrej, model no. neh 06 7117 ) e02 providing bright finished mortise latch & lock isi marked with six lever and pair of stainless steel handle with cylinder both side key option / one side knob & other side coin option all complete as per direction of e / i. ( model no.godraj neh 08 6763 ) e03 providing bright finished mortise latch & lock isi marked with six lever and pair of stainless steel handle with cylinder both side key option / one side knob & other side coin option including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. ( make gogrej, model no. neh 09 6687 ) e04 providing bright finished cylinder lock ( make godraj 5329 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e05 providing godrej hydraulic door closer ( makegodrej, model no : c071 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e06 providing bright finished brass handles with screws etc. complete: size: 200 mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e07 providing bright finished brass handles with screws etc. complete: size: 150 mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e08 providing bright finished brass handles with screws etc. complete: size: 125 mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e09 providing bright finished brass tower bolts ( barrel type ) with necessary screws etc. size: 150x10 mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e10 providing bright finished brass tower bolts ( barrel type ) with necessary screws etc. size: 250x 10mm mm including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e11 providing door hinges with necessary screws etc. including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e12 providing baby latch lock with necessary screws etc. including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e13 providing soft close drawer channel 300mm ( make:godrej, model no : godrej 7083 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e14 providing soft close drawer channel 350mm ( 14 ) ( make model no : godrej 7084 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e15 supplying godrej wardrobe soft hinge ( make godraj 7216 ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. e16 supplying stainless steel cabinet, kitchen, drawer wardrobe, door pull handle size 4 including materials, taxes and labour all complete as per building specification and direction of e / i. e17 supplying wardrobe lock ( make godraj 8086 ) including materials, taxes and labour all complete as per building specification and direction of e / i. e18 providing soft close drawer channel 450mm ( make model no : godrej 7086 including materials, taxes and labour all complete as per building specification and direction of e / i. e19 providing glass door bottom lock patch ( make:godrej model no : 7759 ) including materials, taxes and labour all complete as per building specification and direction of e / i. e20 providing glass door floor spring ( make:godrej, model no : godraj 5746 ) including materials, taxes and labour all complete as per building specification and direction of e / i. e21 providing glass door pull handle ( make:godrej, model no : 7272 ) including materials, taxes and labour all complete as per building specification and direction of e / i. e22 providing glass door connect patch ( make:godrej, model no : 7776 ) including materials, taxes and labour all complete as per building specification and direction of e / i. ( f ) blinds & curtains items f01 providing roller blind ( make model: marvel ) best quality of approved size including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. f02 supplying of roller blinds model: black out including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. f03 providing luzon blinds of approved size, colours & shades, to be fixed in jumbs, luzon blinds combine soft, seamless fabric with crisp even pleats that hold their shape indefinity, including all taxes and labour complete as per building specification and direction of e / i. f04 providing curtain in door & window including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. f05 supplying of green curtains ( doctor cloth ) of size 63x48 including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. f06 providing curtain of superior quality approved fabric material curtain & astar with rings , bukram , stiching charges making adequate plats fixing in prefixed curtain rod & power track as per direction of e / i curtain cloth make pure / dicitex / gmf ( g ) supply of electronics items g01 supplying of led t.v ( make: sony led tv 55 4k pro model no: kd 55x7500h in5 ) including materials, taxes and labour all complete as per building specification and direction of e / i. g02 supplying of led t.v ( make: sony led tv 75 model no: kd 75x8000h ) including materials, taxes and labour all complete as per building specification and direction of e / i. g03 supplying of led t.v ( make: sony led tv 43 model no: kdl43w6600 ) including materials, taxes and labour all complete as per building specification and direction of e / i. g04 supplying of led tv of approved size and capacity ( make model no. sony led klv 32w622g ) including materials, taxes and labour all complete as per building specification and direction of e / i. g05 providing instant water heater 3 ltr 3kw ( make model no: bajaj new majesty ) including materials, taxes and labour all complete as per building specification and direction of e / i. g06 supplying of air purifier of approved size and capacity ( make model no. forbes pro air purifier aeroguard 45 ) including materials, taxes and labour all complete as per building specification and direction of e / i. ( h ) supply items h01 providing of artificial grass including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of e / i. h02 providing pop made cornice in ceiling including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of e / i. h03 supplying of imported wallpaper ( make model: excel ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. h04 supplying of imported wallpaper ( make model: x treme ) including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. h05 providing black reflective film coating on glass window including all materials, labour, all taxes and royalty all complete as per building specification and direction e / i. h06 providing plaster of patta paris over plastered surface to prepare the surface even and smooth complete. h07 providing anti temite treatment wiih all labour and material all complete work as per instruction of e / i. h08 supplying red foot mat including materials, taxes and labour all complete as per building specification and direction of e / i. h09 supplying green foot mat of synthetic type including materials, taxes and labour all complete as per building specification and direction of e / i. h10 supplying bathroom mate ( make duro turf premium ) including materials, taxes and labour all complete as per building specification and direction of e / i. h11 supplying 12mm toughened glass including materials, taxes and labour all complete as per building specification and direction of e / i. h12 supplying 12mm plain glass including materials, taxes and labour all complete as per building specification and direction of e / i. h13 supply of parking stand of approved size, colour and design including materials, taxes and labour all complete as per building specification and direction of e / i. h14 supplying wall clock make: ajanta analog 32 cm x 32 cm including materials, taxes and labour all complete as per building specification and direction of e / i. h15 supplying wall clock make: ajanta ( model no. ajanta397ivory ) including materials, taxes and labour all complete as per building specification and direction of e / i. h16 supplying wall clock make: ajanta ( model no. 557 ) size: 762x57mm including materials, taxes and labour all complete as per building specification and direction of e / i. h17 supplying of acrylic sheet of approved size and colours, texture & shade including materials, taxes and labour all complete as per building specification and direction of e / i. h18 supplying coat hanger including materials, taxes and labour all complete as per building specification and direction of e / i. h19 supplying wooden stool including materials, taxes and labour all complete as per building specification and direction of e / i. h20 supply of wooden shelf ( 65x30x18 ) including materials, taxes and labour all complete as per building specification and direction of e / i. h21 supplying teakwood relax chair including materials, taxes and labour all complete as per building specification and direction of e / i. h22 supplying bamboo plant indoor in glass pot including materials, taxes and labour all complete as per building specification and direction of e / i. h23 supplying of designer flower pot handmade ceramic planter including materials, taxes and labour all complete as per building specification and direction of e / i. h24 providing artificial potted plant of approved size and colour for desk or table including materials, taxes and labour all complete as per building specification and direction of e / i. h25 providing carpet ( make model no : ocmcs2 ) in floor of approved size, quality and colour including materials, taxes and labour all complete as per building specification and direction of e / i. h26 supplying of serving tray including materials, taxes and labour all complete as per building specification and direction of e / i. h27 supplying of stainless steel mesh dustbins round shape – 10 liter including materials, taxes and labour all complete as per building specification and direction of e / i. h28 supplying of plastic dustbin with soft closing cover 12l including materials, taxes and labour all complete as per building specification and direction of e / i. h29 supplying of stainless steel paper bin pedal dustbin with bucket of size 10l including materials, taxes and labour all complete as per building specification and direction of e / i. h30 supplying of stainless steel paper bin pedal dustbin with bucket of size 20l including materials, taxes and labour all complete as per building specification and direction of e / i. h31 supplying of multicolour aquarium stone of approved size and colours, texture & shade including materials, taxes and labour all complete as per building specification and direction of e / i. h32 supplying of round 65 multipurpose lock ( make: link lock ) including materials, taxes and labour all complete as per building specification and direction of e / i. h33 supplying of thermosteel flip lid flask, 1000 milliliters, silver ( make: milton ) including materials, taxes and labour all complete as per building specification and direction of e / i. h34 supplying of t.v trolly of approved size, in all colours & shades including all taxes and royalty all complete as per building specification and direction e / i. h35 supplying of materials all complete as per direction of e / i. ( i ) lamp ( ii ) centrepiece carpet 26x50 ( iii ) flower pot small size ( iv ) flower pot big size ( v ) carpet ( size: 1.6mx1.7 m ) ( vi ) carpet ( size: 1.6mx2.3m ) ( vii ) carpet ( size: 1.2mx1.8m ) h36 supplying of materials for day to day maintenace work all complete as per direction of e / i. ( i ) glass or window cleaner ( ii ) bleaching powder ( iii ) floor cleaner ( lizol / dettol / equivalent ) ( iv ) odonil ( v ) nepthalin balls ( vi ) toilet cleaner ( harpic liquid ) ( vii ) stick broom ( viii ) phool broom ( ix ) plastic bucket ( 10ltr ) ( x ) plastic mug ( xi ) wet mop ( xii ) duster yellow ( xiii ) colin liquid ( xiv ) garbage waste dustbin capacity 40l ( xv ) hand wash liquid ( dettol / lifebuoy / equivalent ) ( xvi ) rubber gloves ( xvii ) wiper with rod ( xviii ) toilet brush ( xix ) jala brush with bamboo stick ( xx ) garbage bag ( xxi ) face mask ( xxii ) gum boots ( xxiii ) chakachak powder ( xxiv ) air freshener godrej aer spray h37 providing single disc scrubbing machine to clean floor surfaces of rooms, bathrooms, coridoor, lift, staicase etc. with safety precautions for to clean. all complete as per building specifications and direction of e / i. h38 providing walk behind auto scrubber cum drier machine to clean floor surfaces of rooms, bathrooms, coridoor, lift, staicase etc. with safety precautions for to clean. all complete as per building specifications and direction of e / i. h39 providing high jet pressure cleaner to clean chocked drain, courtyard area, bathrooms etc. with safety precautions for to clean. all complete as per building specifications and direction of e / i. h40 providing professional wet and dry vaccume cleaner machine to clean floor surfaces of rooms, bathrooms, coridoor, lift, staicase etc. with safety precautions for to clean. all complete as per building specifications and direction of e / i. h41 supply of national flag of size ( 300 x 200 ) in 100% shinny, knitted polyster ( 160gsm ) , all flags are disperse printed washable and durable as per the flag code and specification of the indian flag double stiched 3 side and 4th side sleeve with double hamming on all four side stiching for more durability uv protected colours individually packed in poly bag etc. as required. ( as sample received ) location of work: e type & f type qtr. at hec, dhurwa, ranchi. ( j ) plumbing items j01 ewc with soft closing seat cover ( make hindware model no. agnese 92563 ) j02 ewc with soft closing seat cover ( make hindware model no. berlin 92563 ) j03 ewc with soft closing seat cover ( make hindware model no. vega 92548 ( s 30 ) ) j04 ewc with soft closing seat cover ( make hindware model no. malibu 20086 ( p 18 ) ) j05 ewc with soft closing seat cover ( make hindware model no. star s 20087 ( s 10 ) ) j06 ewc with soft closing seat cover ( make hindware model no. element 92082 ( s 30 ) ) j07 ewc with soft closing seat cover ( make hindware model no. olivia 92042 ( s 22 ) ) j08 ewc with soft closing seat cover ( make hindware model no. estella 92083 ( s 30 ) ) j09 ewc with soft closing seat cover ( make hindware model no. edge ( s 220 ) 92562 ) j10 ewc with soft closing seat cover ( make jaquar model no : sls wht 6855s ) j11 ewc with soft closing seat cover ( make jaquar model no. continental cns wht 755s220spp & cns wht 207 ) j12 iwc orissa pan ( make jaquar model no.cns wht 451 ) j13 wash basin pedestal ( make hindware model no : neptune, ped.11029 ) j14 wash basin with pedestal ( make hindware model no : 10001 standard, ped.11003 ) j15 urinal senser mini concealed type flushing valve ( make jaquar model no : snr stl 51083 ) j16 urinal ( make jaquar model no : urs wht 13263 ) j17 urinal ( make hindware model no : senso art 60018 ) j18 urinal ( make hindware model no : flow 60021 ) j19 squating ( make hindware model no : 60003 ) j20 auto closing concealed urinal flush valve ( make jaquar model no : prs chr 073 ) j21 counter top basin ( make jaquar model no : continental fls wht 5601 ) j22 corner wash basin ( make hindware model no : 10055, classic corner ) j23 corner basin ( make hindware make hindware model no : 10031, corner ) j24 pvc cistern ( make hindware, model: sleek smart ) j25 flush plates ( make jaquar model no. jcp chr 352415 ) j26 single piece slim concealed cistern body with installations kit & s type drain pipe connection set for wall hung wc ( without flush control plate ) ( make jaquar model no. jcs wht 2400s ) j27 single lever basin mixer ( make hindware model no : f440009 cora ) j28 pillar cock self closing ( make hindware model no : f310001acp ) j29 pillar cock auto closing system ( make jaquar model no : prs 031 ) j30 pillar cock ( make hindware model no : f440001 cora ) j31 pillar cock ( make hindware model no : quadra f380001 ) j32 pillar cock ( make hindware model no: contessa plus f330002 ) j33 pillar cock ( make hindware model no : f330012 ) j34 pillar cock ( make hindware model no : f740001 dove ) j35 pillar cock lift type ( make jaquar model no. flr 5015 ) j36 pillar cock ( make jaquar model no : flr chr 5011n ) j37 angular stop cock ( make hindware model no : f440005 ) j38 angular stop cock ( make hindware model no : quadra f380004 ) j39 angular stop cock ( make hindware model no : contessa plus f330043 ) j40 angular stop cock ( make hindware model no : f740039 dove ) j41 angular stop cock ( make jaquar model no. vgp chr 81053 ) j42 angular stop cock ( make jaquar model no : flr chr 5053n ) j43 angular stop cock ( make jaquar model no. con chr 059kn ) j44 angular stop 2 way for cistern and ewc ( make hindware model no : contessa plus f330006 ) j45 concealed stop cock with adjustable wall flange ( make hindware model no. f200007 ) j46 bib cock ( make jaquar model no. cqt chr 23037 ) j47 bib cock ( make jaquar model no. cqt chr 23037 ) j48 bib cock with wall flange ( make hindware model no : f740041 dove ) j49 bib cock with wall flange ( make hindware model no : f440003 ) j50 bib cock with wall flange ( make hindware model no : f330041 ) j51 2 way bib cock for health faucet ( make jaquar model no. cqt chr 23041 ) j52 2 way bib cock for health faucet ( make jaquar model no. cqt chr 23041 ) j53 2 way bib cock for health faucet ( make jaquar model no : flr chr 5041n ) j54 2 in 1 bib cock for health faucet ( make hindware model no : f440004 ) j55 2 way bib cock for health faucet ( make hindware model no : contessa plus f330004 ) j56 2 way bib cock ( make hindware model no: contessa plus f330006 ) j57 2 way bib cock for health faucet ( make hindware model no : f740004cp, dove ) j58 2 way bib cock for health faucet ( make hindware model no : quadra f380003 j59 2 way bib cock for health faucet ( make hindware model no : f330004scp ) j60 health faucet with 1 meter long easy flex tube & wall hook ( make jaquar model no : ald chr 573 ) j61 health faucet with 1 meter long easy flex tube & wall hook ( make hindware model no : f160002 ) j62 health faucet with 1 meter long easy flex tube & wall hook ( make hindware model no : f160068 ) j63 health faucet with 1 meter long easy flex tube & wall hook ( make hindware model no : f160001 ) j64 health faucet with 1 meter long easy flex tube & wall hook ( make hindware model no : f160023 ) j65 shower arm casted ( make jaquar model no. sha chr 477 ) j66 overhead shower ( make jaquar model no. eos ess 541rb ) j67 sink mixer wall mounted ( make jaquar model no. cqt cht 23309 ) j68 sink cock ( make hindware model no : f280012 flora ) j69 wall mixer ( make jaquar model no. cqt 23273upr ) j70 cera single lever faucets f1016721 chelsea high flow single lever concealed diverter ( make cera model no : exposed part f1016721, concealed part f4030101 ) j71 single lever exposed parts kits of hi flow divertor consisting of operating lever, wall flange ( with seals ) & button only ( make jaquar model no. ali 85079k ) j72 overhead shower with shower arm & wall flange ( make hindware model no : f160039 ) j73 bath tub spout ( make jaquar model no. spj chr 5429s ) j74 waste coupling ( make hindware model no : f860010 ) j75 waste coupling ( make jaquar model no : ald chr 709 ) j76 soft closing seat cover ( make jaquar model no : ars wht 39101uf ) j77 soap dish ( make jaquar model no. acn 1131n ) j78 soap dish ( make hindware model no : f890005 ) j79 soap dispenser with glass bottle ( make jaquar model no : acn 1135n ) j80 bottle trap ( make jaquar model no : ald whm 769l300x190 ) j81 bottle trap ( make hindware model no. f850003 ) j82 paper holder with cover ( make hindware model no : f840009 ) j83 toilet roll holder with flap ( make jaquar model no : acn chr 1153s ) j84 towel rack with lower hanger ( make hindware model no : acn 1581h ) j85 towel bar ( make jaquar model no : ahs chr 1501 ) j86 towel bar ( make jaquar model no : acn 1111sm ) j87 towel bar ( make hindware model no : f880005 ) j88 towel bar ( make hindware model no : f840013 ) j89 towel ring ( make hindware model no : f880007 ) j90 corner glass shelf ( make jaquar model no. acn 1173 ) j91 glass shelf ( make hindware model no. f880010 ) j92 glass shelf ( make jaquar model no. acn 1171n ) j93 counter top basin ( make jaquar model no : continental drs wht 37601 ) j94 single lever tall boy with 180mm extension body fixed spout ( make jaquar model no : vgp 81005nb ) j95 bib cock with wall flange ( make jaquar model no : vgp 81037 ) j96 angular stop cock ( make jaquar model no : vgp 81053 ) j97 2 in 1 bib cock for health faucet ( make jaquar model no : vgp 81041 ) 1 name of work =renovation of data entry room making of work station and upper head cabinate electrification work supply and installlation of a.c for data entry room of micro biology department at old acadmic building r.i.m.s ranchi ( a ) wooden works 01 s / f / f of staf cubical and work station for minimum dept 0.75 incuding arrangement for lcd / usb air ventilation holes for wiring etc all complete job with all materials labour and taxes all complete as per building specifition and direction of e / i. solid plyboard 19mm thick centure make water proof ply outside laminate 1mm thick green lam / century lam inside laminate 0.8mm thick green lam / century lam channel / soft closing hinge hetich ( 202 s.s grade ) lock of furinture godrej / cent handle / jail brass / s.s finsh handle door closer helix / ebco / hettich / yama ( 202 ss gdade ) edge binding same laminate / p.v.c 02 s / f / f upper head cabinate file cabnite including all materials labour taxes all complete as per building specifiction and direction of e / i ply bboard 19mm thick green , centuire or isi mark water proof ply grade out side laminate 1mm thick green lam / centure lam inside laminate 0.8mm thick green lam / centure lam channel / soft closing hinge hetich ( 202 s.s grade ) lock of furniture goderj / cent handle / jail brass / s.s finsh handle door closer helix / ebco / hettich / yama ( 202 s.s grade ) edge binding same laminate / p.v.c 03 s / f / f ply board wall partion with both side laminates and itching glss vertical standing position including all materials labour taxes all complete as per building specifition and diretion of e / i. farming with wooden beat or 19mm thick centure make water proof ply board. both side shutering with 12mm thick water proof centure ply laminate 1mm thick centure glass 5mm thick saint govine glass glass 8mm for glazed door portion 25mm thick poly fiber wool 04 s / f / f all height wall panneling of 12mm thick water proof ply ( centure panic pine wood isi mark termites ) over 2*1 aluminum section , 1mm thick water proof laminate centure / green all complete including all taxes and royalty all complete as per building specifition nad direction e / i. 05 supply of 1.50 tr hitachi inverter split ac ***** 06 installation charges of each set of a.c. 07 supply of copper pipe of required dimensions 08 supply of drain pipe 09 supply of out door stand 10 spply of 5kva stablizer 02 name of work : emergenat repair work and miscellaneous at chief secretary resident at deendayal nagar at booty road ranchi 01 melamine polished on wood work 02 post construction termite service pest control service 03 nane of work : renovtion work of room no 10, 11, 12, 13, 14, 15 at russian hostel hec dhurwa ranchi 01 suppling fitting and fixing door shutter and chaukhat panelling for new door of 30mm thick with wooden framed of 12mm thick in choukhat and pasting 4mm thick veneer in both side all complete ( including all fancy type fitting ) .ply board 12mm thick greenply, century or isi mark water proof ply grade, laminate : 4mm thick greenply / decowood vaneer including all taxes and royalty all complete as per building specifiction and direction e / i name of work: supply & installation of materials, furnishing & associated work at office of of registrar co operative societies, pashupalan bhawan, hesag, ranchi, jharkhand & tribunal, dhurwa, ranchi, and ultra modern audio visual & associated work at meeting room of chc, angara, ranchi, jharkhand 1 sitc of dockyard stage including all material labour taxes all complete as per building specification and direction of e / i ply board 19mm thick green water proof ply. 2 sitc of providing and fixing customise table 19mm thick both side best quality ply and 4mm thick veneer both side pasting finishing all complete ( including all fancy type fitting like handle and lock ) as per building specification and direction of e / i. 3 wooden teak customized sagwan pillar for dockyard ( stage ) 4 floor carpeting art classic for meeting hall vision specifications. manufacturing process: tufting 1 / 10 structured loop pile printed scroll / tip sheared, pile content: 100% pa imprel nylon, mprimary backing: non woven pes, secondary backing: action back, pile weight: ca. 1.190 gm / m ( 42 oz ) , total weight: ca. 2.060 gm / m, pile height: ca. 5 mm, total height: ca. 8 mm, number of knots: ca. 221.000 / m, performance; permanently antistatic: 2 kv, light fastness: 5 6, water resistance: 4 5, thermal resistance: 0, 09 m2k / w, sound insulation: iso 140 8: ca. 26 db delta l, sound absorption: iso 354: ca. 0.20 alpha w, fire class: fire resistance c s1 and all materials including cost of fitting make: oem 5 table top glass with polishing all sides and corner make: saint govin / oem 6 supply and placing in position of ( hb ) chair. the product should be fom green guard, aiota, igvc, fsc certified. model no rich / 37826 / hb, make durian, 7 supply and placing in position of visitor chair. the product should be fom green guard, aiota, igvc, fsc certified. model no bzt / 60101, make durian, 8 supply and placing of display storage. dimension ( l ) 1200mmx ( d ) 400mmx ( h ) 2000mm. material: engineering wood color: red cherry. the product should be fom green guard, aiota, igvc, fsc certified.. model notrove , make durian, 9 wiring for light / power plug with 2x1.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit along with 1 no 1.5sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required 10 wiring for light / power plug with 2x2.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit along with 1 no 2.5sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required 11 wiring for light / power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit along with 1 no 4.0 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required 12 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required. 13 tv 55 display size: 55 inches native resolution: 3840 x 2160 ( uhd ) / 4k, brightness: minimum 400 cd / m2 or above contrast ratio ( native ) minimum 1300 : 1 or better, viewing angle: 178 * 178, response time: 12 ms or better, connectivity : input ports: hdmi 3, usb 2.0 1, rs232c, rf, rj45, output ports: digital audio out, special features: smart home ( launcher bar ) , web browser, pre loaded app ( youtube only ) , soft ap, wifi, screen share ( miracast ) , dial, bluetooth audio playback, sound sync / bluetooth, wi fi: built in wifi required, environment conditions, operation temperature: 0 °c to 40 °c or lower, operation humidity: 10 % to 80 % or better, audio: 20w ( 10w * 2 ) , power : power supply: 100 240v~, 50 / 60hz, power type: built in power, power consumption typ.: 145 w or less, standard ( certification ) ; certificates: bis, accessories: table stand, remote and standard cables, warranty one year, model : 55ut / r640s, make: lg / oneplus 14 tv 65 display size: 65 inches native resolution: 3840 x 2160 ( uhd ) / 4k, brightness: minimum 400 cd / m2 or above contrast ratio ( native ) minimum 1300 : 1 or better, viewing angle: 178 * 178, response time: 12 ms or better, connectivity : input ports: hdmi 3, usb 2.0 1, rs232c, rf, rj45, output ports: digital audio out, special features: smart home ( launcher bar ) , web browser, pre loaded app ( youtube only ) , soft ap, wifi, screen share ( miracast ) , dial, bluetooth audio playback, sound sync / bluetooth, wi fi: built in wifi required, environment conditions, operation temperature: 0 °c to 40 °c or lower, operation humidity: 10 % to 80 % or better, audio: 20w ( 10w * 2 ) , power : power supply: 100 240v~, 50 / 60hz, power type: built in power, power consumption typ.: 145 w or less, standard ( certification ) ; certificates: bis, accessories: table stand, remote and standard cables, warranty one year, model : 65ut / r640s, make: lg / oneplus 15 tv 75 display size: 75 inches native resolution: 3840 x 2160 ( uhd ) / 4k, brightness: minimum 400 cd / m2 or above contrast ratio ( native ) minimum 1300 : 1 or better, viewing angle: 178 * 178, response time: 12 ms or better, connectivity : input ports: hdmi 3, usb 2.0 1, rs232c, rf, rj45, output ports: digital audio out, special features: smart home ( launcher bar ) , web browser, pre loaded app ( youtube only ) , soft ap, wifi, screen share ( miracast ) , dial, bluetooth audio playback, sound sync / bluetooth, wi fi: built in wifi required, environment conditions, operation temperature: 0 °c to 40 °c or lower, operation humidity: 10 % to 80 % or better, audio: 20w ( 10w * 2 ) , power : power supply: 100 240v~, 50 / 60hz, power type: built in power, power consumption typ.: 145 w or less, standard ( certification ) ; certificates: bis, accessories: table stand, remote and standard cables, warranty one year, model : 75ur640s, make: lg 16 tv 85 display size: 85 inches native resolution: 3840 x 2160 ( uhd ) / 4k, brightness: minimum 400 cd / m2 or above contrast ratio ( native ) minimum 1300 : 1 or better, viewing angle: 178 * 178, response time: 12 ms or better, connectivity : input ports: hdmi 3, usb 2.0 1, rs232c, rf, rj45, output ports: digital audio out, special features: smart home ( launcher bar ) , web browser, pre loaded app ( youtube only ) , soft ap, wifi, screen share ( miracast ) , dial, bluetooth audio playback, sound sync / bluetooth, wi fi: built in wifi required, environment conditions, operation temperature: 0 °c to 40 °c or lower, operation humidity: 10 % to 80 % or better, audio: 20w ( 10w * 2 ) , power : power supply: 100 240v~, 50 / 60hz, power type: built in power, power consumption typ.: 145 w or less, standard ( certification ) ; certificates: bis, accessories: table stand, remote and standard cables, warranty one year, model : 86ut / r640s, make: lg 17 hdci cable for camera, make: polycom / mx 18 hdmi 20 mtr 4k, make: kramer / falcon / mx 19 presentation device : windows® based computer, windows vista®, windows 7, windows 8, windows 10 or later, usb port, : color: black, laser class: class 2 laser, max output: less than 1mw, wave length: 640~660nm ( red light ) , battery type: 2 aaa batteries, battery life ( laser pointer ) : 20 hour maximum, battery life ( presenter ) : 1050 hour maximum, wireless operating distance: approx 10m 2, wireless technology: 2.4 ghz wireless technology, supported os: windows vista, windows 7, windows 8 and above, interface: usb, accessories: caring case. model: r400, make: logitech 20 camera: smooth motorized pan, tilt and zoom, controlled from remote or console 260°pan, 130° tilt, 10x lossless hd zoom, 90° field of view, full hd 1080p 30fps, h.264 uvc 1.5 with scalable video coding ( svc ) , autofocus 5 camera presets, far end control ( ptz ) of conference cam products zeiss lens certification, kensington security slot, led to confirm video streaming standard tripod thread, speakerphone, full duplex performance, acoustic echo cancellation, noise reduction technology, ultra wideband audio, bluetooth and nfc wireless technology, lcd for caller id, call duration and other functional response, leds for speakerphone streaming, mute, hold and bluetooth wireless paring touch controls for call answer / end, volume and mute, bluetooth – plus camera ptz, “home” preset and farend control, microphones ( tx ) , four omni directional microphones supporting, 20 foot diameter range, frequency response: 100hz – 11khz, sensitivity: 28db + / 3db, distortion: <1% @ 1khz at 106db, speakers ( rx ) , frequency response: 120hz – 14khz, sensitivity: 83dbspl + / 3db at 1w / 1m, max output: 91dbspl, distortion: <5% from 200hz, kensington security slot hub / cable, central mountable hub for connection of all, components included adhesive solution for under table mounting, two cables for connection between hub and camera / speakerphone ( length: 5m / 16’ ) , one usb cable for connection to pc / mac ( length: 3m / 6.6’ ) , ac power adapter ( length: 3m / 9.8’ ) , remote control: dockable, 8.5m / 28 foot range, usb 2.0 compliant, uvc compliant video and audio for broad application, compatibility, optimized for microsoft® lync®, certifed for skype for business, cisco jabber® and webex® compatible., enhanced integration with logitech collaboration, program ( lcp ) members. downloadable diagnostic tool, field upgradeable firmware tool downloadable app expansion group connection type: plug and play, indicator lights ( led ) : led to confirm video streaming, microphone mute, on hold, and bluetooth pairing. microphone type: mono, wideband, noise cancelling buttons / switch: microphone mute. model: group, make: logitech / peoplelink. 21 one number dial in virtual meeting rooms ( vmr ) will be provided for conference , host meeting for participants on the vmr, can join conference using hard endpoints, can join conference using soft clients ( desktop & mobile ) ., can join conference using soft clients & hard end points. device registration and alias dialling, using pin secure conference joining, lecturer & normal ( auto ) conference layout, full hd video quality on conference call, full hd content sharing on conference call, unlimited conference duration, 16*5 technical team is available for support. web suit url link: per vmr, per cloud based rpd license, live streaming per user vc recording per vmr, qualification criteria: cloud vc solution should hosted only in india. proposed solutions should belong to reputed oem., cloud vc solution should hosted in tier 3 data center in ha mode. video conferencing endpoint and cloud infrastructure must be from the same oem. cloud oem should have office in all metro cities. helpdesk should be available in india with dedicated toll free number including ( telephonic support, remote support, & mail support ) it should support h.323, sip standards for communications. it should support h.261, h.263, h.264 avc / svc, h.264 high profile it should support 1080p 60 fps, 1080p 30 fps, 720p 60 fps and 720p 30fps. it should support content sharing using standard based h.239 and bfcp over sip it should support content resolution at hd 1080p @ 30fps it should transmit both people and content simultaneously to the far end location at 1080p @30 fps. it should support g.711, g.728, g.729a, g.722, g.722.1, aac ld or better it should support 20khz bandwidth with crystal clear audio and stereo sound. automatic gain control and automatic noise suppression. it should have media encryption ( h.323, sip ) : aes 128, aes 256. dial in and dial out mode in ip networks should be supported & should have capability to mix ip dial in & dial out participants in the same call. the multi point call can be encrypted ( aes / des encryption ) . make: beetel cloudway, peoplelink 22 bathroom renovation work with repairing all washbasin cumbered, urinal, ventilation make:jaguar / kajariya / oem 23 wash basin sifting and plumbering work with items 24 modular kitchen / furniture work with installation and fittings tall unit with 2 fixed & 3 removable shelf rhs drawer unit with 2 large drawers of equal size. drawers fitted with soft close mechanism scala 2 big drw set wt bot and back 90, base filler in front finish, special base unit with 1 shutter to accommodate domestic gas cylinder rhs, cylinder trolly s. s. 304, 3 drawers unit with perforated cutlery tray cup and saucer holder and plate rack, s. s. 304 21 cct set with hettich slide, special base unit with 2 shutter to accommodate domestic gas cylinder, c frame loft 1 shutter rh, special 18mm one side coloured panel, bottom profile wall unit with 1 framed glass shutter and 1 removable glass shelf rhs, wall filler in front finish, bottom profile corner wall unit with 1 shelf and 1 shutter. one side blind lbd, add on detergent holder in s. s. 304 grade stainless steel special 25mm both side coloured panel, special 18mm one side coloured panel, wall filler in front finish, bottom profile wall unit with 1 shutter and 1 removable shelf lhs, make: spacewood 25 aluminium triple track window with glass, jali and all fittings make:hindalco 26 jio fiber speed 1gbps 1 year with installtion, make: jio 27 wall painting with ultima acrylic smooth emulsion paint , make: berger, asian paint, wall care 28 for fourth floor gallery false ceiling & office false ceiling. supply and installation of 12.5 mm thick gypsum glass fiber reinforced ( gfr ) snazz cosmos seamless, true continues finish having random circular perf toa 5% with variable acoustics ( 8 / 15 / 20mm ) for broad band sound absorption with size of boards are 1200 x 2400 mm having density 650 kg / mt cube & weight 8 kg / mt square with fire class 1 & p , climate 0c, rh ( 50, 70 ) , nrc upto 0.75 to be fixed with philips head screw to suspended gi frames as per the specification for fixing concealed grid ceiling system. the concealed wall paneling system shall include gi wall channel ( wc 25 ) having thickness 0.45 mm, length 3600 mm, unequal flanges of 15 & 20 mm and web of 25 mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300 mm centers. then fixed main channels ( mc 45 ) to be suspended with the help of gi channel sa 25 from rcc / perling. the mc 45 channels are having thickness 0.9 mm, length 3600 mm, equal flanges of 15 mm and web 45 mm from the side wall & fixed at every 1200 mm centers with gi ceiling channel ( cc 25 ) having thickness 0.45 mm, length 3600 mm, knurled web 35 mm, depth of 25 mm and equal flanges 9.5 mm is fastened to the main channel in the direction perpendicular to the main channel at every 600 mm centers. the framework will maintain a 50 / 75 mm gap from the walls. now lifting the boards on the cc 25 with the help of screws to get a flush finish. the jointing & finishing of the same will be done by using jointing compound , paper tape. make: anutone 29 supply and installation of salte polka semiperfs size 595x595 in dual diameters the unique moonscape look densified tegular edge cpwd dsr 26.26 the technical parameters are as follows :core grg silicate fire – class 1 & p , acoustics – stc 44 54 , termite resistance , green ( rc % ) – 30, hygiene ( voc, clean room ) – low, class 3 , thermal 0.12 w / mk. the t 15 stepe edge grid system of 600 x 600 mm module shall include wall angle ( wa 24 w 30 ) with unequal flanges of size 14 & 20 mm wide, length 3000 mm, 0.43 mm thick fixed along the perimeter of wall with the help of nylon sleeves and suitable fasteners at 300 mm centers. then suspend the main t15 ( mt 24 w 36 ) having flange width 24 mm, height 32 mm and length 3600 mm from the soffit with help of soffit cleat and wire rod along with leveling spring clip at 1200 mm c / c. cross 24 ( ct 24 w 12 ) with flange width 24 mm, height 32 mm and length 1200 mm is then interlocked into the precut slots in the main t15 at 600 mm centers in the direction perpendicular to the main t15. finally cross t 15 ( ct 24 w 06 ) having flange width 24 mm, height 32 mm and length 600 mm are then interlocked into the precut slots in the 1200 mm cross t15 at 1200 mm centers and in direction parallel to the main t15 . grg silicate densified tegular edge of size 595 x 595 x 10 mm thick shall be placed into the grid size of 600 x 600 mm, make: anutone 30 false celing light round 12w, model:cdr12, make crompton / c& s / philips 31 false ceiling light size 1x1 24 watt, model: recess ccr, make crompton / c& s / philips 32 sitc of providing and fixing choukhat / windows panelling with wooden framed by 12mm thick both side best quality ply and 4 mm thick veneer pasting and polishing as per building specification and direction of e / i. 33 sitc of providing and fixing door shutter 30 mm thick both side best quality ply and 4 mm thick veneer both side pasting finishing all complete ( including all fancy type fittings ) as per building specification and direction of e / i. 34 sitc board wall partition with etching glass vertical stand position including all material, labour, taxes all complete as per building specification and direction of e / i. framing with wooden with 19mm thick green water proof ply board placing both side shuttering with 12 mm thick water proof green ply: 4mm veneer finish glass: 6mm glass with itching design, polishing of veneer 35 sitc of upper head cabinet, rack, or wall unit file cabinet including all material, labour, taxes all complete as per building specification and direction of e / i. ply board 19 mm thick green water proof ply grade, outside veneer: 4 mm thick green veneer. with polishing both side channel / soft closing hinge; hettich / godrej ( 202 ss grade ) lock of furniture: godrej / cent handle / jali: brass / ss finish handle door closer: godrej / helix / ebco / hettich / yama ( 202 ss grade ) edge binding same laminate / pvc. 36 sitc for curtains of branded / high quality fabrics with ss rods and brackets for fixing and furnishing assorted colors plain & prints, stitched as per site / size requirement, fast colors, water wash, fabric density non transparent, fabric of curtain shall be soft texture, great shading, drape effect and nice dobby composition, bracket shall be side mounted and front mounted as required, with accessories and labour charges door curtains, ss rod. 37 natural teak wood flooring with installaing with all accessories make: oem 38 sitc for blinds of branded / high quality fabrics with cassette for fixing and furnishing fabric details, openness factor:1% to 8%, composition: 30% polyester, 70% pvc, fabric thickness: 0.55 mm, weight ( g / m2 ) : 400, width ( m ) : 2m & 2.5m, density fends / inch ) : 48x46, yarn diameter ( d ) : 220d, breaking strength ( n / 5cm ) : 1600nx1500n, elongation ( % ) : warp 22%, weft:23%, color fastness: 4.5, fire resistance: nfpa 701:2015, uv blockage: 95%, pattern: plain weaving ( 2x2 ) , environment: green guard indoor air quality certified, antibacterial: astm 2180 01and astm g21 09, with accessories and labour charges make: oem 39 sitc for blinds of branded / high quality fabrics with fixing and furnishing fabric details, openness factor:1% to 8%, composition: 30% polyester, 70% pvc, fabric thickness: 0.55 mm, weight ( g / m2 ) : 400, width ( m ) : 2m & 2.5m, density fends / inch ) : 48x46, yarn diameter ( d ) : 220d, breaking strength ( n / 5cm ) : 1600nx1500n, elongation ( % ) : warp 22%, weft:23%, color fastness: 4.5, fire resistance: nfpa 701:2015, uv blockage: 95%, pattern: plain weaving ( 2x2 ) , environment: green guard indoor air quality certified, antibacterial: astm 2180 01and astm g21 09, with accessories and labour charges , make: oem 40 sofa set ( 3+1+1 ) supplying and placing in position of premium leatherette 5 seater sofa set . the product should be from green guard, aiota, igvc, fsc certified, make: durian / methodex / spacewood 41 side table supplying and placing in position of center . the product should be from green guard, aiota, igvc, fsc certified table . model: cameroon / st, make: durian / methodex / spacewood 42 centre table supplying and placing in position of center . the product should be from green guard, aiota, igvc, fsc certified table. table. model: cameroon / ct, make: durian / methodex / spacewood 43 wall fan 16 with silent feature, dust free, soundless, make: havells, bajaj 44 sitc delegate chair bach row conference chair. chair seat size 510mm ( w ) x 500mm ( d ) and chair back 51omm ( h ) x 510mm ( w ) , the seat shall be made up of 1.2+ / o.1cm thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric or synthetic leather and molded polyurethane foam. the back shall be made up 1.2+ / 0.1cm thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and molded polyurethane foam. the molded polyurethane foam shall be of density 45+ / 2kg / m3, and hardness load 16+ / 2kgf as per is:7888 for 25% compression. the armrest top shall be made of molded polyurethane and mounted on to a fixed type m.s tubular armrest support chrome plated. the backrest shall consist of a fixed type mechanism i.e no back up / down adjustment. the leg frame welded assembly shall be chrome plated, made from 3 5+ / o.03cm x 1.5+ / o.02cm x o.16+ / o.0128 cm thick elliptical ms erw tube and provided with a base plate for seat fixing. ) cantilever chair & armrest with p.u. padding& chrome plated base. 5%post consumed recycled content & 30% total recycled content. the product should be from green guard, aiota, igvc, fsc certified , model rich / 37815 / mb, make durian 45 doorbell wireless make: cona 46 gate grill for windows and installation, primer and paintingmake: oem 47 supply and placing in position of 3 seater ss chair. the product should be from green guard, aiota, igvc, fsc certified.model no:nixon / 3, make: durian 48 fire extinguisher abc type powder 9 kg, make:secure zone / oem 49 fire extinguisher co2 4.5 kg, make:secure zone / oem 50 online ups 10 kva capacity: 10kva / 9kw load with 0.9 p. f technology10kva rack mountable double conversion true online ups with insulated gate bi polar transistor ( igbt ) technology based rectifier & inverter both. form factor: 4u, ac input voltage range / phase: 100 280 v with 1:1 & 3:1 options in same ups. ups efficiency at full load min 94% or more input frequency range; 40 70hz ( auto sensing ) , ac output voltage configurable for 220:230:240 v output frequency 50hz ± 0.01%. wave form: pure sine wave ( output ) surge energy rating min 450 joules harmonie distortion less then: 3%, crest factor: 3:01, battery features: battery backup of 60 min using 12v smf or flooded battery compatibility. vah should be minimum 12480 vah. battery make: quanta / panasonic / / exide. in built charger inbuilt charger should be min 7amps or greater. charger amps to be mentioned external charger will not be accepted. environmental operating temperature: 0 40c, noise level< 55db. make: online ups: apc, , model: src10kuxi, make of dry cell: quanta amaron model: 65ah 51 cover top shed make: oem 52 l shape workstation partition size: 1500l+ 900l x 1500w x 1200ht ( single seater ) table size: 1500l x 600d x 750ht side unit size: 900l x 400d x 750ht supplying and placing in position of sliding tile base modular workstation as per photograph. free standing partition height 1200mm in main span and at end of the cluster , should be minimum of 65mm thick. partition inner frame is 1.2mm thick mild steel. horizontal and vertical trims are made out of extruded aluminum of 1.2mm thick. all panels / trims shall be powder coated with 50 micron. aluminum trims are elegantly fixed with hidden connectors on the partition. partition shall have provision for pin up board with magnetic fabric / white marker of approved shade above table top . partition framework shall have adequate provisions for the movement of electric data cables at desired 1 levels at skirting . the complete partitioning work shall be carried out as per the approved drawing. 25mm thk. prelam particle board tabletop with pvc edge banding. the worktop shall be supported on minimum 2mm thick powder coated crca brackets and side panels. side panel made of 18mm pre laminated finish board with pvc edge banding. pvc keyboard tray & metal cpu trolley with castors. side unit with openable shutter + 3 drawers with lock, handle etc. model: 65 series, make: durian 53 table partition for work station area free standing partition 65wx1200htx67mm thick sliding tile base partition of 1200mm height in main skirting level in partition soft board and white board in partition above table top. model: 65series size, make: durian 54 l shape table sitc supplying table. the main desk of size ( l 2400xd 1025xh 770 ) mm made out of 60mm thick honey comb mdf board including with 0.5mm veneer and contained the thickness of table top shall be 60mm centre to centre and from the all sides of table top, leather attached on tabletop for extra grip and comfort, veneer portion shall be finished with melamine. side panel shall be made out of 80mm thick honey comb mdf board and front modesty 18mm thick mdf board veneer coated with melamine polish. independent sides unit shall be supported on four castors. side unit shall be size ( l 1200xd 595xh 770 ) mm and having a provision for one drawer, one cpu holder, one open shelf’s and one closed storage with single shutters for storage. side unit top shall be made out of20mm mdf board including with 0.5mm thick veneer finished. the under structure shall be made out of 18mmthick mdf board and coated with melamine. table shall have single mobile pedestal unit with a combination of 3 drawers. pedestal sides, front and bottom shall be made out of 16mm thick mdf board. drawer bottom and backing of the pedestal should be 9mm thick mdf board. drawers shall be in veneer and coated with melamine finish all complete with all accessories and bye works.model: mjf / 61101, make: durian 55 supplying and placing of chair / high back. material & subtype premium leatherette. colour & colour family black. dimension ( w ) 640mm x ( d ) 500mm x ( h ) 1210mm.seating capacity 1 seater maximum seating height 635mm.minimum seat height 540mm.function revolving: pneumatic height lift: tilt tension control: centre tilt base chrome base. locking mechanism centre tilt the product should be from green guard, aiota, igvc, fsc certified. model rich / 37815 / hb, make: durian 56 supplying and placing of revolving chair ( mb ) .size ( w ) 660mm ( d ) 505 ( h ) 1280.the product should be fom green guard, aiota, igvc, fsc certified. model: rich / 37815 / mb make: durian 57 wi fi campus with 8 channel poe ethernet switch 2 nos, access point 5 nos, cat 6 cable 3 roll, router , accessories and installation make: dlink, tplink 58 ro system with plumbring make: kent 59 iron channel gate, make: oem 60 aluminium door make: hindalco 61 name plate; make: oem 62 foot mat make: oem 63 flower port with plants with soil and plant and plantation make: oem 64 camera2mp fixed dome type, image sensor: ½.7” cmos, signal system: pal / ntsc, min. illumination: color 0.05 lux ( agc on ) ; ir on 0 lux, s / n ratio: ≥50 db, day & night: icr, shutter speed: pal:1 / 50 1 / 50000, ntsc:1 / 60 1 / 60000, wide dynamic range: dwdr. digital noise reduction: 2d, lens: 3.6mm / 6mm, fov: 85°, ir led: 18pcs, ir wavelength: 850nm, ir range: 20m, osd: supported, image: effective resolution: 1920x1080, frame: pal:25fps, ntsc:30fps, video output: max distance 75 50hm 300m, video output: ahd / tvi / cvi / cvbs, general: power supply: dc12v ± 10%, power consumption: 3.5w ( max ) , operating temperature: 10° c ~ 55°c ( 14°f ~ 131°f ) , operating humidity: 0% 85% rh, ingress protection: ip66, approvals: ce / fcc, material: plastic, make: dlink 65 camera2mp fixed bullet hd camera, image sensor: ½.7” cmos, signal system: pal / ntsc, min. illumination: color 0.05 lux ( agc on ) ; ir on 0 lux, s / n ratio: ≥50 db, day & night: icr, shutter speed: pal:1 / 50 1 / 50000, ntsc:1 / 60 1 / 60000, wide dynamic range: dwdr, digital noise reduction: 2d, lens: 3.6mm / 6mm, fov: 85°, ir led: 18pcs, ir wavelength: 850nm, ir range: 30m, osd: supported, image: effective resolution: 1920x1080, frame: pal:25fps, ntsc:30fps, video output: max distance 75 50hm 300m, video output: ahd / tvi / cvi / cvbs, general: power supply: dc12v ± 10%, power consumption: 3.5w ( max ) , operating temperature: 10° c ~ 55°c ( 14°f ~ 131°f ) , operating humidity: 0% 85% rh, ingress protection: ip66, pprovals: ce / fcc, material: aluminum alloy, make: dlink 66 sitc dvr 8ch video: video compression: h.264 high profile encode ability: 8ch*1080n@15fps decode ability: 8ch*1080n@15fps video input ( pure analog ) : pure analog: 8ch*720p, support 16ch*1080p mixed: 8ch*ahd ( 720p ) + 8ch*tvi ( 720p ) , 8ch*ahd ( 1080p ) + 8ch*ipc ( 720p ) support: 8ch*ahd ( 1080p ) + 8ch*tvi ( 1080p ) , 8ch*ahd ( 1080p ) + 8ch*ipc ( 1080p ) pure network: 8ch*720p, support 8ch*1080p audio: audio compression: g.711a two way audio: support record and playback: hard drive: 2sata ( each maximum support 6tb ) record: manual / event / timer playback: 16ch ( pure local input mode ) storage & back up: space occupation: 960h:12~20g / day*channel, 720p:~20g / day*channel, 1080p 20~30g / day*channel, audio: 691.2m / day*channel backup mode: usb hdd interface: video input: 8ch bnc ( ahd / tvi / cvbs ) video output: 1ch vga, 1ch hdmi audio input: 6ch rca audio output: 1ch rca network interface: 1 rj45 10m / 100m adaptive ethernet port ptz control: rs 485, support multiple ptz protocols usb: 2 usb general: power: dc 12v / 2a operating temperature: 10°c~50°c ( 14°f~122°f ) dimension: 350mm ( l ) x 295mm ( w ) x 45mm ( h ) , make: dlink 67 sitc dvr 16ch / 2 sata dvr video: video compression: h.264 high profile encode ability: 16ch*1080n@15fps decode ability: 16ch*1080n@15fps video input ( pure analog ) : pure analog: 16ch*720p, support 16ch*1080p mixed: 8ch*ahd ( 720p ) + 8ch*tvi ( 720p ) , 8ch*ahd ( 1080p ) + 8ch*ipc ( 720p ) support: 8ch*ahd ( 1080p ) + 8ch*tvi ( 1080p ) , 8ch*ahd ( 1080p ) + 8ch*ipc ( 1080p ) pure network: 16ch*720p, support 16ch*1080p audio: audio compression: g.711a two way audio: support record and playback: hard drive: 2sata ( each maximum support 6tb ) record: manual / event / timer playback: 16ch ( pure local input mode ) storage & back up: space occupation: 960h:12~20g / day*channel, 720p:~20g / day*channel, 1080p 20~30g / day*channel, audio: 691.2m / day*channel backup mode: usb hdd interface: video input: 16ch bnc ( ahd / tvi / cvbs ) video output: 1ch vga, 1ch hdmi audio input: 6ch rca audio output: 1ch rca network interface: 1 rj45 10m / 100m adaptive ethernet port ptz control: rs 485, support multiple ptz protocols usb: 2 usb general: power: dc 12v / 2a operating temperature: 10°c~50°c ( 14°f~122°f ) dimension: 350mm ( l ) x 295mm ( w ) x 45mm ( h ) make: dlink 68 sitc of 16 channel 20 amp make: dlink 69 sitc hdd storage 6 tb, make: wd / seagate 70 connector, bnc 16, power 8 make: oem 71 sitc type: 3 plus 1, color: white length: 90 mtr, make: dlink 72 rack4u; make: dlink 73 pvc conduit make: oem 74 inverter make: crompton / exide / vguard 75 battery 160 ah make: cromton / vguard 76 double trolly , make: crompton 77 sitc new bathroom build in front of back staircase ( 3rd floor ) and exclusive fittings of bathroom make: kajariya and jaguar 78 a ) bathtub spout, make: jaguar 79 b ) bottle trap, make: jaguar 80 c ) brush holder, make: jaguar 81 d ) flow diverter, make: jaguar 82 e ) control plate darc, make: jaguar 83 f ) glass shelf, make: jaguar 84 g ) soap dispenser, make: jaguar 85 h ) health faucet, make: jaguar 86 i ) hi flow diverter, make: jaguar 87 j ) swivel mirror, make: jaguar 88 k ) over head shower, make: jaguar 89 l ) basin mixer, make: jaguar 90 m ) urinal, make: jaguar 91 n ) urinal sensor, make: jaguar 92 o ) shower arm, make: jaguar 93 p ) soap holder, make: jaguar 94 q ) wall hang basin, make: jaguar 95 r ) towel ring, make: jaguar 96 s ) two way bib cock, make: jaguar 97 t ) waste coupling, make: jaguar 98 u ) single piece wc, make: jaguar 99 v ) providing and fixing 6mm precast white glazed tile in wall over 12 mm cement mortar ( 1:3 ) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes and royalty all complete as per building specification and direction and e / i 100 w ) providing and laying double charge vertified floor tiles in different sixe ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622 / iso 13006 of approved make in all colours and shades, laid on20 m thick cement motor ( 1:4 ) ( 1cement:4coarse sand ) , jointing with grey cement slurry @3.3kg / sqm including grouting the joints with cement and matching pigment etc complete size of tiles 300x450mm 101 x ) wall for washroom name of work: ultra modern audio visual & associated work at meeting room of chc, angara, ranchi, jharkhand 1 loudspeaker, system frequency range ( 10 db ) :60 hz – 20 khz frequency response ( + / 3 db ) : 85 hz – 17 khz power rating: 200 w continuous program ( 2 hrs ) , 100 w ( 400w peak ) continuous pink noise ( 2 hrs ) , 75 w ( 300w peak ) continuous pink noise ( 100 hrs ) maximum input voltage: 25.3 v rms ( 2 hrs ) , 50.6 v peak maximum spl: 110 db average continuous pink noise ( 116 db peak ) , sensitivity: 90 db, 1w / 1m ( averaged 100 hz – 10 khz ) , coverage angle: 100° x 100°, directivity factor ( q ) : 6.04 ( averaged 1 khz – 16 khz ) , directivity index ( di ) : 7.6 db ( averaged 1 khz – 16 khz ) , nominal impedance: 8 ohms ( thru setting ) crossover type: 2nd order low pass, 3rd order high pass circuitry, transformer taps: 70v: 30w, 15w, 7.5w, 3.7w, 100v: 30w, 15w, 7.5w insertion loss <0.94 db at any tap setting thru setting: 8ω nominal recommended protective high pass: 60 hz high pass ( 24 db / oct ) ( for 8ω operation and for all 70v / 100v tap settings ) , transducers, low frequency: 135 mm ( 5.25 in ) , woven fiberglass cone with pure butyl rubber surround with weather edge frame protection, high temp fiberglass voice coil former, hightemp voice coil wire, optimized cone geometry, linear, suspension spider, and fea optimized motor structure. high frequency: 19 mm ( 0.75 in ) pei diaphragm, low viscosity ferromagnetic fluid, and lightweight kapton™ voice coil former, physical, enclosure material: high impact polystyrene ( hips ) , painted with highly uv resistant paint on white ( wh ) version for maximum uv fade resistance. grille: highly zinc plated, finished in durable tgic polyester powder coating. mtc 25wmg 1 ( & wh ) available with weather max™ multi layer foam and tight weave mesh vapor barrier backing. environmental: ip 44 per iec529 ( ip 55 when installed with the optional mtc 25wmg 1 weathermax™ grille and either mtc pc2 or mtc pc3 panel cover. ) exceeds milspec 810 for humidity, salt spray, temperature & uv. passes milstd 202f for salt spray and astm g85 for acid air plus salt spray. optional mtc 25wmg 1 weathermax™ grille for breaking up driving rain and for especially difficult environments.model: control 25 1, make:jbl 2 polar pattern: cardioid frequency range: 70 to 18, 000 hz max. spl: 125 db ( for 1% thd ) equivalent noise level: <21 db‐a signal / noise ratio ( a weighted ) : >73 db impedance: <=600 ohms recommended load impedance: >=2, 000 ohms supply voltage: 9 to 52 v phantom power to iec 61938 ( dpa adapter integrated ) powering: <3 ma connector: 3‐pin male xlr finish: matte black length microphone: 50cm, model:cgn521sts, make:akg 3 wireless microphone sr 470 carrier frequency range band 1: 650 to 680 mhz band 6 a ism: 835.1 to 861.9 & 863.1 to 864.9 mhz band 3: 720 to 750 mhz, band 7: 500.1 to 530.5 mhz band 3 k: 740.1 to 751.9 mhz , band 8: 570.1 to 600.5 mhz, band 5 a: 790.1 to 819.9 mhz , band 9: 600.1 to 605.9 & 614.1 to 630.5 mhz, band 5 b: 806.125 to 809.750 mhz, band 9 u: 600.1 to 630.5 mhz band 5 d: 794.1 to 805.9 mhz, band m: 826.3 to 831.9 mhz, band d: 863.1 to 864.9 mhz switching bandwidth 30.5 mhz ( country dependent ) sensitivity 6.3 dbv / 100 dbm diversity system microprocessor controlled diversity modulation wideband fm audio bandwidth 35 – 20 000 hz ( ± 3 db ) t.h.d. 0.3 % snr ( a weighted ) typ. 120 db ( a ) audio outputs 1 x xlr sockets balanced 1 x ts ” / 6.3 mm jack sockets unbalanced mount kit ht 470 carrier frequency range band 1: 650 to 680 mhz band 6 a ism: 835.1 to 861.9 & 863.1 to 864.9 mhz band 3: 720 to 750 mhz, band 7: 500.1 to 530.5 mhz band 3 k: 740.1 to 751.9 mhz, band 8: 570.1 to 600.5 mhz, band 5 a: 790.1 to 819.9 mhz , band 9: 600.1 to 605.9 & 614.1 to 630.5 mhz, band 5 b: 806.125 to 809.750 mhz, band 9 u: 600.1 to 630.5 mhz band 5 d: 794.1 to 805.9 mhz, band m: 826.3 to 831.9 mhz, band d: 863.1 to 864.9 mhz switching bandwidth = 30.5 mhz ( country dependent ) rf output power 10 or 50 mw ( erp, country dependent ) modulation / bandwidth wideband fm microphone capsules d 5 – dynamic ( super cardiod ) c 5 – condenser ( cardioid ) max. spl =144 db spl audio bandwidth 35 – 20 000 hz ( ± 3 db ) t.h.d.= 0.7 % snr ( a weighted ) > 120 db ( a ) battery life 7 hours with one 1.5 v lr6 aa alkaline battery 8 hours with one 1.2 v hr6 aa rechargeable battery ( min. 2100 mah ) 14 hours with one 1.5 v fr6 aa lithium battery dimensions 237 mm ( 9.3 in. ) length, 51 mm ( 2 in. ) dia. net / shipping weight 240 g ( 8.5 oz. ) without batteries standard accessories 1 x aa size lr6 battery, stand adapter, windscreen. model:wms470 vocal make:akg 4 sheet pristine audio quality. a sound craft tradition. comtwo assignable usb inputs surprisingly familiar. incredibly powerful. iconic lexicon digital effects work seamlessly with your mac or pcr model:notepad 8fx. make: soundcraft 5 front panel led indicators: per input: signal present, clip, 48v ( input only ) other: com, stat, err, pwr analog inputs: 10 electronically balanced on phoenix combicon removable screw connectors mic / line inputs: nominal gain 0db, electronically switchable up to +48db, in +6db steps input impedance: 3.0kω maximum input level: +20dbu with 0db input gain, +8dbu with 12db gain cmrr: >75db at 1khz input noise ( e.i.n. ) : < 125dbu typical with 150ω source, phantom power: 48v nominal, selectable per input, a / d latency: 37 / fs [ 0.77ms@48k ] analog outputs: 8 electronically balanced on phoenix / combicon removable screw connectors maximum output level: +19dbu frequency response: 20hz 20khz ( +0.5db / 1db ) thd: <0.01% 20hz to 20khz, +10dbu output dynamic range: 108db typical, 22hz 22khz unweighted crosstalk: < 75db output impedance: 40ω balanced and 20ω unbalanced d / a latency: 29 / fs [ 0.60ms@48k ] telephone interface: dynamic range: 67db frequency response: 300 to 3.3khz thd: <0.3% transhybrid loss: >48db with lec enabled lec tail time: 64ms tx level: 10dbm rms average rx level: +3.2dbm rms aec processing: 8 independent algorithms aec processing latency ( original 8k algorithm ) : 2385 / fs [ 49.69ms@48k ] aec processing latency ( full bandwidth algorithm ) : 1609 / fs [ 33.52ms@48k ] tail length: 200 ms average convergence rate: 49 db / s ( net convergence over multiple fft bands ) control ports: 12 inputs and 6 outputs control input voltage: 0 to 4.5v, model:blu102, make:bss control input impedance: 4.7kω to +5v ( 2 wire mode ) , >1mω ( 3 wire mode ) logic output voltage: 0 or +5v unloaded logic output impedance: 440ω logic output current: 10ma source, 60ma sink watchdog output: phoenix / combicon connector for failsafe control opto output current: 14ma maximum withstanding voltage: 80v maximum ( off ) series impedance: 220ω ( isolated ) control network: connectors: rj45 ethernet connector maximum cable length: 100m / 300ft on category 5 cable between device and ethernet switch blu link: connectors: 2 x rj45 ethernet connectors price: 255820+10%cp+5%ohc=rs. 294193 6 amplifier sensitivity: 1.4v rated power output ( per channel at 4ω ) : 500w stereo signal to noise ratio ( below rated 1khz power at 8ω ) : 100 db ( a weighted ) total harmonic distortion: <0.5% damping factor 20 hz to 1khz: >500 frequency response ( at 1w, 20 hz to 20 khz ) : +0 db, 1 db crosstalk ( below rated power ) 20 hz to 1khz: >70 db input impedance: 20kω balanced, 10kω unbalanced model:xti1002, make: crown 7 microphone cable, make: oem 8 speaker cable, make: oem 9 xlr connecter, make: oem 10 6 kva online ups with connectors shelf rack & installation capacity: 6kva / 5.4 kw@0.9 p.f technology: 6kva rack mountable double conversion true online ups with insulated gate bi polar transistor ( igbt ) technology based rectifier & inverter both. ups must be having parallel redundancy feature ( 1+1 ) & crest factor 3:1 form factor: 3u ac input voltage range: 160 285 v, single phase ups ( wide voltage range required ) ups efficiency at full load: min 91% or more input frequency range: 40 70hz ( auto sensing ) ac output voltage: configurable for 220:230:240v output frequency: 50hz ± 0.01% wave form: pure sine wave ( output ) protection: input over voltage protection, input under voltage protection, over voltage cut off. short circuit protection, over temperature, low battery & battery over charge protection should be provided. built in bypass switch must. surge energy rating: min 450 joules software: ups monitoring software with auto shutdown should be given in oem cd overload capacity: 125% 1 minute 30 second > 150% to 175% 25 line cycles, > 175% 5line cycle harmonies distortion: less than 3% crest factor: 3:01 indications & audible alarms: mains on, inverter on, overload, load on mains, load on battery, battery low etc. digital metering: lcd display for measurement of ac voltage, battery voltage, battery current, load current, output frequency etc. battery back up: nominal voltage:12 volts rated capacity ( c20 hour rate at 27°c ) : 65 ampere hour dimensions ( ±2 mm ) : length: 351 mm, width: 167 mm, height: 175 mm capacity@ 80.6°f ( 27°c ) : 20hour rate ( 3.25a ) up to 10.5v: 65.0 ah, 10hour rate ( 5.59a ) up to 10.5v: 55.90 ah, 5hour rate ( 10.29a ) up to 10.2v: 51.40 ah, 1hour rate ( 36.36a ) up to 9.6v: 36.30 ah, 15 minute rate ( 101.1a ) up to 9.6v: 25.20ah internal resistance: fully charged battery 80.6°f ( 27°c ) : 9.40 mω capacity affected ( temperature at c20hour rate ) : 104°f ( 40°c ) : 110%, 80.6°f ( 27°c ) : 100%, 32°f ( 0°c ) : 80%, 5°f ( 15°c ) : 60% self discharge 80.6°f ( 27°c ) : capacity after 3month storage: 90%, capacity after 6 month storage: 80% terminal type: m6 x 20 mm bolted short circuit current: 1382 a battery 12v smf or flooded battery compatibility. vah should be minimum 8064 vah. battery ah to be mentioned along with quantity & battery paralleling will not be accepted. ( firms will be blacklisted for suppling tractor batteries or local stickered battery ) in built charger: in built charger should be min 6.5amps or greater. charger amps to be mentioned external charger will not be accepted. environmental: operating temperature: 0 40c, noise level< 55db other details: iec 320 standards cable to be used certification: bis certification & product manual is must. to be attached with tender documents. iso 9001, iso 14001, ohsas 18001 certified and certificate of rohs compliance product user manual to be submitted along with technical bid. the same is inherently required to evaluate technical specification. the user manual should be easily accessible in oem website after sales support & manufacturers: pan india based service center with 24x7x365 days support with dedicated toll free number having minimum 2 service center in jharkhand. ( no local mobile / landline number for service will be entertained ) warranty: minimum 1 year onsite warranty on ups & battery both with no charges on parts, labour& service during this tenure on ups repair or replace except physical damage or damage due to natural calamity ups & battery oem certificate to be enclosed along tender quotes our organization will not pay any extra charges during this tenure. make: online ups: apc, model: src6kuxi, make of dry cell: quanta amaron model: 42ah 11 acoustic lower rich 4 supply & installation of wall panelling of anutone slats surco lite high density fibre board made out of pure pinewood particles with green building certified, fire resistance pink in colour core with 5 test fire resistance bs 476 part 5 , bs 476 part 6 , bs 476 part 7 iso 1182 astm e662 smoke density melamine laminated finish, perforated wooden grooved hdf slats l16 2 ( 2 mm grooves @ 8 mm centers ) , tongue groove edge for a seamless look of lineal dimension size 128 mm x 2440 mm x 16 mm thick having density 700 kg / m3, weight 9 kgs / m2 with back fleecs from soundtex germany nonwoven acoustic to be pasted on slats surco is to be installed by using gi strut system. the technical parameters are as follows core variants fiberboard, climate ( oc rh ) – 50, 70 light reflectance – 75%, green ( rc % ) – 25, hygiene ( voc, clean room ) – low, class 1, strength, load capacity ( kg ) anti sag, ball impact. the concealed wall paneling system shall include gi wall channel ( wc25 ) having thickness 0.45mm, length 3600mm, unequal flanges of 15 & 20mm and web of 25mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300mm centers. then fixed main channels ( mc45 ) having thickness 0.9mm, length 3600mm, equal flanges of 15mm and web 45mm from the side wall & fixed at every 1200mm centers with gi cross channel ( cc25 ) having thickness 0.45mm, length 3600mm, knurled web 35mm, depth of 25mm and equal flanges 9.5mm is fastened to the main channel in the direction perpendicular to the main channel at every 600mm centers. the framework will maintain 50 / 75 mm gap from the walls. now clad the wooden slats surco on the cc 18 with the help of center & edge clips to get better locking of slats. the tongue & groove are to be properly aligned to get flush look. synth poly fiber pf 5 x 50 wool of 500 gsm to be filled between the horizontal & vertical studs as in filler. make: anutone 12 acoustic upper rich 4’ supply and installation of stretch hush acoustical fabric fabric system by using fr grade nrc fabric of size 1.4x75 mm width, shall be stretched by using woodwool board base 10 mm thick rigid vinyl stretch tracks half wrap / full wrap 15 mm fs15 & mid seam 15 mm fs 15, 15 mm pinewood magnesia bonded strand board, synthetic poly fibre 5x50 infill with requisite accessories & tools. pinewood wood based wool fiber having 15 mm thick square edge is first installed on the wall along the marking lines with metal fasteners inserted at 300 mm centers fs 15 tracks to be installed on wooden base after applying stick s7 adhesive on both surfaces for a true & continuous secure grip, & heavy duty fasteners at 150 mm centers on both sides of stretch tracks. pinewood wool panels having square edge magnesite bonded pinewood fibers panels of size 600 x 1200 x15 mm having density 400 kg / m3 , weight 4 kg which is fixed to gi channel cc25 on walls placed at 600 mm centers vertically / horizontally with suitable fasteners with mc 45 at 1200 c / c & wc 25 is for supporting the main frame. . synthetic poly fiber pf 5 x 50 mm thick adhered on strand tracks by following the fabric thread line or pattern. the fabric nrc is stretched & tucked into the stretch tracks & secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. note minimum 50 mm additional fabric is required for tucking hence maximum module wall fabric width would be 1600 mm the technical parameters of the system are core pinewood fibre & polyfiber fire 1 acoustic nrc 0.85 climate ocrh 49, 90 termite resistance yes , light reflectance colour dependant , green rc % 25 , hygiene ( voc , clean room ) low , class 1, make: anutone 12 acoustic upper rich 4’ supply and installation of stretch hush acoustical fabric fabric system by using fr grade nrc fabric of size 1.4x75 mm width, shall be stretched by using woodwool board base 10 mm thick rigid vinyl stretch tracks half wrap / full wrap 15 mm fs15 & mid seam 15 mm fs 15, 15 mm pinewood magnesia bonded strand board, synthetic poly fibre 5x50 infill with requisite accessories & tools. pinewood wood based wool fiber having 15 mm thick square edge is first installed on the wall along the marking lines with metal fasteners inserted at 300 mm centers fs 15 tracks to be installed on wooden base after applying stick s7 adhesive on both surfaces for a true & continuous secure grip, & heavy duty fasteners at 150 mm centers on both sides of stretch tracks. pinewood wool panels having square edge magnesite bonded pinewood fibers panels of size 600 x 1200 x15 mm having density 400 kg / m3 , weight 4 kg which is fixed to gi channel cc25 on walls placed at 600 mm centers vertically / horizontally with suitable fasteners with mc 45 at 1200 c / c & wc 25 is for supporting the main frame. . synthetic poly fiber pf 5 x 50 mm thick adhered on strand tracks by following the fabric thread line or pattern. the fabric nrc is stretched & tucked into the stretch tracks & secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. note minimum 50 mm additional fabric is required for tucking hence maximum module wall fabric width would be 1600 mm the technical parameters of the system are core pinewood fibre & polyfiber fire 1 acoustic nrc 0.85 climate ocrh 49, 90 termite resistance yes , light reflectance colour dependant , green rc % 25 , hygiene ( voc , clean room ) low , class 1, make: anutone 13 sitc of acoustics for side walls 4 nos side wall of meeting hall supply & installation of wall paneling of slats surco high density fiberboard made out of pure pinewood particles, fire resistance pink in colour core with 5 test fire resistance bs 476 part 5, bs 476 part 6, bs 476 part 7 iso 1182 astm e662 smoke density melamine laminated finish, perforated wooden grooved hdf slats l16 2 ( 2 mm grooves @ 8 mm centers ) , tongue groove edge for a seamless look of linear dimension size128 mm x 2440 mm x 16 mm thick having density 700 kg / m3, weight 9 kgs / m2 with back fleecs from sound tex germany nonwoven acoustic to be pasted on slats surco is to be installed by using gi strut system. the technical parameters are as follows core variants fiberboard, climate ( oc rh ) – 50, 70 light reflectance – 75%, green ( rc % ) – 25, hygiene ( voc, clean room ) – low, class 1, strength, load capacity ( kg ) anti sag, ball impact. the concealed wall paneling system shall include gi wall channel ( wc25 ) having thickness 0.45mm, length 3600mm, unequal flanges of 15 & 20mm and web of 25mm should be fixed along the perimeter of the wall with nylon sleeves and suitable fasteners at every 300mm center. then fixed main channels ( mc45 ) having thickness 0.9mm, length 3600mm, equal flanges of 15mm and web 45mm from the side wall & fixed at every 1200mm centers with gi cross channel ( cc25 ) having thickness 0.45mm, length 3600mm, knurled web 35mm, depth of 25mm and equal flanges 9.5mm is fastened to the main channel in the direction perpendicular to the main channel at every 600mm center. the framework will maintain 50 / 75 mmgap from the walls. now clad the wooden slats surco on the cc 18 with the help of center & edge clips to get better locking of slats. the tongue & groove are to be properly aligned to get flush look. synth poly fiber pf 5 x 50 wool of 500 gsm to be filled between the horizontal & vertical studs as in filler with the help of wire / stick 7 adhesives. test certificate of the use products shall be submitted after procurement of materials. make: anutone: 14 conference table 23 seater . prelam particle board tabletop with pvc edge banding.tabletop supported with 36mm thk prelam particle board side with pvc edge banding.tabletop supported with 18mm thk prelam particle board modesty panel with pvc edge banding.provison of ( 6 module ) flip top box above table top make: durain, 15 supplying and placing of back row chair size ( w ) 520mm ( d ) 470mm ( l ) 930. the product should be fom green guard, aiota, igvc, fsc certified.model: mmpl / 70018 / cn make:durian, 16 false ceiling light 2x2 36 w rated voltage ( v ) : 240v ~ frequency ( hz ) : 50, operating voltage range : 150v~ 270v~, rated input current ( a ) : 0.157, rated wattge ( w ) @240 : 36, pf : / 0.95, model:lctrh 36 cdl, make crompton / c& s / philips 1 mirror glass including corner polish, drilling and mirror screw and accessories 2 supplying and placing of revolving chair ( hb ) for chamber.the product should be fom green guard, aiota, igvc, fsc certified .make durian, model n0 zeuce 3 supply and placing of conventional storage. ( l ) 900mmx ( d ) 450mmx ( h ) 1980mm. office storewell with 4 selves gauge: body:22 gauge* door:20gauge color: gray. the product should be fom green guard, aiota, igvc, fsc certified . model: garner, make:durian, 4 table lamp, model bajaj softlite led 5 copier machine type:core functions, control panel: print, copy, scan, send and optional fax, memory: standard: 17.78 cm ( 7 inch ) tft lcd wvga colour touch panel, interface connection: standard:2.0gb ram, print / copy speed: network: 1000base t / 100base tx / 10base t, wireless lan ( ieee 802.11 b / g / n ) , others: usb 2.0 ( host ) x3, usb 2.0 ( device ) x1, ir 2645: 45 pages / min ( a4 ) , 22 pages / min ( a3 ) , ir 2630: 30 pages / min ( a4 ) , 15 pages / min ( a3 ) , ir 2625: 25 pages / min ( a4 ) , 15 pages / min ( a3 ) , memory media: standard: usb memory, paper supply capacity ( a4, 80g / m2 ( gsm ) : standard: 1 200 sheets, paper output capacity standard ( a4, 80g / m2 ( gsm ) : 250 sheets, maximum: 545 sheets ( with inner finisher j1 ) , supported media weights: paper cassettes ( 1 / 2 ) : 60 to 128g / m2 ( gsm ) , multi purpose tray: 52 to 220g / m2 ( gsm ) , print resolution: 1 200 x 1 200dpi, page description language: standard: ufr ii, optional: genuine adobe® postscript® 3tm, pcl 6, operating system:ufrii: windows® 7 / 8.1 / 10 / server 2008 / server 2008 r2 / server 2012 / server 2012 r2 / server 2016 / server 2019, mac, os x ( 10.9 or later ) address book: ldap ( 2 000 ) / local ( 1 600 ) / one touch ( 200 ) , send resolution: push: 600 x 600dpi, pull: 600 x 600dpi, 400 x 400dpi, 300 x 300dpi, 200 x 200dpi, 150 x 150dpi, 75 x 75dpi, communication protocol: file: ftp ( tcp / ip ) , smb ( tcp / ip ) , webdav, email / i fax: smtp ( send ) , pop3 ( receive ) , file format: standard: tiff ( mmr ) , jpeg* , pdf ( compact, pdf a / 1 b, encrypted ) , xps ( compact ) , pdf / xps ( device signature ) , optional: pdf ( trace & smooth ) , pdf / xps ( user signature, searchable ) , network: standard: ip / mac address filtering, ipsec, tls encrypted communication, snmp v3.0, ieee 802.1x, ipv6, smtp, authentication, pop authentication before smtp, s / mime, document: standard: secure print, encrypted pdf, encrypted secure print, device signature, optional: user signature cassette feeding unit an1: paper capacity: 550 sheets x 2 ( 80g / m2 ) , paper type: thin, plain, thick, colour, recycled, pre punched, paper size: a3, a4, a4r, a5r, b4, b5, b5r, custom size: 139.7 x 182.0 to 297.0 x 431.8 mm, make: canon model: ir2625 6 number of nozzles:total 1, 792 nozzles, ink bottles:gi 70 ( pigment black / cyan / magenta / yellow ) , maximum printing resolution:4800 ( horizontal ) *1 x 1200 ( vertical ) dpi, print speed*2: based on iso / iec 24734, document ( esat / simplex ) :approx. 13.0 ipm ( black ) / 6.8 ipm ( colour ) , document ( fpot ready / simplex ) :approx. 9 sec ( black ) / 14 sec ( colour ) , photo ( 4 x 6 ) ( pp 201 / borderless ) : approx. 45 sec, printable width; up to 203.2 mm ( 8 ) , borderless: up to 216 mm ( 8.5 ) , printable area: borderless printing*3, top / bottom / right / left margin: each 0 mm, bordered printing, envelope / dl envelope:top 8 mm / bottom 12.7 mm / right 5.6 mm / left 5.6 mm, 127 x 127 mm:top 6 mm / bottom 6 mm / right 6 mm / left 6 mm, 89 x 89mm / 4 x 4:top 5 mm / bottom 5 mm / right 5 mm / left 5 mm, ltr / lgl: top 3 mm / bottom 5 mm / right 6.3 mm / left 6.4 mm, other:top 3 mm / bottom 5 mm / right 3.4 mm / left 3.4 mm, bordered auto 2 sided printing, top / bottom margin: 5 mm, left / right margin: 3.4 mm ( ltr: left: 6.4 mm, right: 6.3 mm ) , support media, rear tray, plain paper ( 64 105 g / m² ) , photo paper pro platinum ( pt 101 ) , photo paper pro luster ( lu 101 ) , photo paper plus glossy ii ( pp 201 / pp 208 ) , matte photo paper ( mp 101 ) , glossy photo paper everyday use ( gp 508 ) , high resolution paper ( hr 101n ) , photo paper plus semi gloss ( sg 201 ) , photo stickers ( ps 108 / ps 208 / ps 808 ) , removable photo stickers ( ps 308r ) , magnetic photo paper ( ps 508 ) , envelope, cassette, plain paper ( 64 105 g / m² ) , paper size, rear tray:a4, a5, b5, ltr, lgl, 4 x 6, 5 x 7, 7 x 10, 8 x 10, envelopes ( dl, com10 ) , square ( 5 x 5, 4 x 4, 89 x 89 mm ) , card size ( 91 x 55 mm ) , make: canon, model: g7070 7 aio functions wireless, print, scan and copy, print: technology hp thermal inkjet, duplex print options manual ( driver support provided ) , speed1 black: up to 19 ppm ( draft, a4 ) ; up to 8 ppm ( iso ) ; colour: up to 15 ppm ( draft, a4 ) ; up to 5 ppm ( iso ) , first page out ( a4, ready ) black: as fast as 13 seconds; colour: as fast as 17 seconds, resolution black ( best ) : up to 1200 x 1200 rendered dpi; colour ( best ) : up to 4800 x 1200 optimised dpi colour, ( when printing from a computer and 1200 input dpi ) , languages hp pcl 3 gui, wireless capability: yes, mobile printing capability2:yes, borderless printing:yes, up to 210 x 297 mm ( a4 ) , scan: type flatbed:technology contact image sensor ( cis ) , resolution hardware: up to 1200 x 1200 dpi; optical: up to 1200 x 1200 dpi; enhanced: up to 1200 dpi, max scanning size flatbed: 216 x 297 mm, input modes scanning via hp photosmart software, grayscale levels 256, bit depth 24 bit, file format jpeg, tiff, pdf, bmp, png, copy:speed3 black: up to 7 cpm ( iso ) ; colour: up to 2 cpm ( iso ) , resolution black ( text and graphics ) : up to 600 x 300 dpi; colour ( text and graphics ) : up to 600 x 300 dpi, max copies up to 9 copies, display 7 segment + icon lcd, recommended monthly, page volume: 400 to 800 pages, media:supported sizes a4; b5; a6; dl envelope, supported weights a4: 60 to 90 g / m²; hp envelopes: 75 to 90 g / m²; hp cards: up to 200 g / m²; hp 10 x 15 cm photo paper: up to 300 g / m², recommended weights 75 g / m², types plain paper, photo papers, matte brochure or professional paper, matte presentation paper, glossy, brochure or professional paper, photo inkjet papers, matte inkjet papers, glossy inkjet papers, paper handling 60 sheet input tray; 25 sheet output tray, memory integrated, processor speed 360 mhz, operating system compatibility: microsoft® windows® 10, 8.1, 8, windows vista®, windows® xp sp3 or higher ( 32 bit only ) : windows server 2008, 32 bit ( sp1 or greater ) , windows server 2008 64 bit ( sp1 or greater ) , windows server 2008 r2 64 bit, windows server 2008 r2 64 bit ( sp1 ) , windows server 2012 64 bit, windows server 2012 r2 64 make: hp, model : wireless 419 8 duplex print options automatic ( standard ) , print speed5 black ( a4, normal ) : up to 25 ppm; black ( letter, normal ) : up to 26 ppm; black ( a4, duplex ) : up to 15 ipm; black ( letter, duplex ) : up to 16 ipm, first page out6 black ( a4, ready ) : as fast as 8 sec, print resolution black ( best ) : up to 1200 x 1200 dpi; black ( normal ) : up to 4800 x 600 dpi, print technology laser, print resolution technology hp prores 1200, hp fastres 1200, 600 dpi, print cartridges number 1 ( black ) , standard print languages pcl 5c, pcl 6, ps, pclm, pdf, printer management windows: hp device toolbox, status alerts ( default install ) , snp alerts ( minimum network install ) , hp web jetadmin, ( download ) ; mac: hp utility, connectivity, standard connectivity 1 hi speed usb 2.0; 1 ethernet 10 / 100, mobile printing capability hp eprint; wireless direct printing, network ready standard ( built in ethernet, wifi 802.11b / g / n ) , wireless capability: no, network capabilities:yes, via built in ethernet, hp eprint capability: yes, memory standard: 128 mb; maximum: 128 mb, processor speed 750 mhz, duty cycle ( monthly ) 7 up to 30, 000 pages; recommended monthly page volume8 : 250 to 2000, paper handling: input 250 sheet input tray, 10 sheet priority tray; output 150 sheet output tray, media type paper ( laser, plain, photo, rough, vellum ) , envelopes, labels, cardstock, transparencies, postcards media weight 60 to 163 g / m², media sizes custom 250 sheet input tray: 76 x 187 to 216 x 356 mm; priority feed slot: 76 x 127 to 216 x 356 mm, dimensions ( w x d x h ) 2 384 x 280.7 x 250.9 mm, weight 6.6 kg, whats in the box1 hp laserjet m202dw printer; hp black laserjet toner cartridge ( ~1500 ) ; installation guide, support flyer, warranty guide; cd containing software and electronic documentation; power cord; usb cable, warranty features one year limited warranty, make: hp, model 202dw 9 sitc lan work 16 port including switch, cat 6 cable, conduit pipe, rj 45 connector, io box, patch cord, 6u rack, including charges make: d link 10 supply and placing of computer table. material & subtype engineering wood particle board color & color family brown wenge dimention ( l ) 1050mmx ( d ) 510mmx ( h ) 750mm finish matte style contemorary the product should be fom green guard, aiota, igvc, fsc, certified, make: durain model:compton 11 all in one pc, display: 23.8 diagonal fhd display, display specifications:23.8 diagonal, fhd ( 1920 x 1080 ) , ips, three sided micro edge, anti glare, 250 nits, 72% ntsc, motherboard specifications, memory:8 gb ddr4 3200 mhz ram ( 2 x 4 gb ) , memory & storage, 8 gb memory; 1 tb hdd storage, internal storage:1 tb 7200 rpm sata hdd, processor type:intel core i5, processor: intel® core™ i5 1135g7 ( up to 4.2 ghz with intel® turbo boost technology, 8 mb l3 cache, 4 cores ) , processor family: 11th generation intel® core™ i5 processor, graphics integrated, graphics card:intel® iris® xᵉ graphics, ports:2 superspeed usb type a 5gbps signaling rate; 2 usb 2.0 type a; 1 hdmi out 1.4; 1 headphone / microphone combo; 1 rj 45, expansion slots:2 m.2 ( 1 for ssd, 1 for wlan ) , network interface:integrated 10 / 100 / 1000 gbe lan, wireless:realtek rtl8821ce m 802.11a / b / g / n / ac ( 1x1 ) wi fi® and bluetooth® 4.2 combo, optical drive:optical drive not included, memory card device:hp 3 in 1 memory card reader, dimensions:54.08 x 20.45 x 40.93 cm, weight:5.85 kg, power supply type:65 w smart ac power adapter, keyboard:usb black wireless keyboard and mouse combo, webcam:hp true vision 720p hd privacy camera with integrated dual array digital microphones, make: hp, model: 24 df1670in 12 hp pavilion laptop, microprocessor: intel® core™ i5 1135g7 ( up to 4.2 ghz with intel® turbo boost technology, 8 mb l3 cache, 4 cores ) , chipset:intel® integrated soc memory, standard 16 gb ddr4 3200 sdram ( 2 x 8 gb ) , video graphics:intel® iris® xᵉ graphics, hard drive: 512 gb pcie® nvme™ m.2 ssd: display:35.56 cm ( 14 ) diagonal, fhd ( 1920 x 1080 ) , ips, micro edge, anti glare, 250 nits, 45% ntsc, keyboard: full size, backlit, natural silver keyboard, wireless connectivity, intel® wi fi 6 ax201 ( 2x2 ) and bluetooth® 5 combo ( supporting gigabit file transfer speeds ) , expansion slots, 1 microsd media card reader, external ports, 1 superspeed usb type c® 10gbps signaling rate ( usb power delivery, displayport™ 1.4, hp sleep and charge ) ; 2 superspeed usb type a 5gbps signaling rate; 1 hdmi 2.0; 1 ac smart pin; 1 headphone / microphone combo, minimum dimensions ( w x d x h ) , 32.5 x 21.66 x 1.7 cm, weight: starting at 1.41 kg, power supply type: 65 w em ac power adapter, battery type:3 cell, 43 wh li ion, battery life mixed usage: up to 8 hours and 15 minutes, video playback battery life:up to 9 hours, webcam: hp wide vision 720p hd camera with integrated dual array digital microphones, audio features:audio by b&o; dual speakers; hp audio boost, software, operating system: windows 10 home single language 64, hp audio switch; hp documentation; hp jumpstart; hp support assistant; hp connection optimizer; hp bios recovery; hp quickdrop, mcafee livesafe™, pre installed software, netflix, software productivity & finance, microsoft® office home & student 2019, make: hp model: 14 dv00543tu 13 1kva offline ups make: microtek 14 document scanner desktop sheet fed scanner, document size: plain paper, u turn path: width: 50.8 to 216mm, length: 70 to 356mm, straight path: width: 50.8 to 216mm, length: 53.9 to 356mm, use long document mode to scan documents :3 000mm long, business card 50 x 53.9mm vertical feeding only, plastic card 53.9 x 85.5mm ( iso standard ) . embossed cards can be scanned document thickness: plain paper , u turn path: 52 128g / m2 ( 0.06 0.15mm ) , straight path: 40 209g / m2 ( 0.05 0.25mm ) , business card 300g / m2 0.35mm , plastic card 0.76mm , document feeding automatic sheet feeding, feeding capacity 6mm stack ( including curls ) or 30 sheets of 80g / m2, scanning element cmos cis, light source led ( red, green, and blue ) , scanning side simplex / duplex, scanning modes black and white, error diffusion, advanced text enhancement, advanced text enhancement ii ( for windows only ) , 256 level grayscale, 24 bit colour, scanning resolutions *1 150 x 150dpi, 200 x 200dpi, 300 x 300dpi, 400 x 400dpi, 600 x 600dpi, scanning speed *2, ( a4 / l, portrait, 200dpi ) simplex: 25ppm, duplex: 50ipm, interfaces hi speed usb 2.0, software windows: isis / twain driver, capture on touch, presto! biz card, omni page, paper port, ecopy pdf pro office, evernote*2, mac *3: twain driver, capture on touch, presto! biz card, presto! page manager, evernote*2, power requirements ac100 to 240v ( 50 / 60hz ) , power consumption, scanning: 12.8w , sleep: 1.8w, off: 0.5w, scanning: 15.6w , sleep: 4.4w , off: 0.5w, operating environment temperature: 10°c to 32.5°c, humidity: 20% to 80% rh, options / consumables flatbed scanner unit 102 ( dr c225 ii only ) , exchange roller kit ( feed roller and retard roller ) , basic wirelesslan specifications, ( dr c225w ii only ) wireless standard: ieee802.11b / g / n ( 2.4ghz only ) , frequency: 2.4ghz band, transfer method: ieee802.11b: ds ss system, ieee802.11g: ofdm system, data rate*4: ieee802.11n: mimo ofdm system, ieee802.11b: up to 11mbps, ieee802.11g: up to 54mbps, ieee802.11n: up to 300mbps. security: wpa psk ( tkip / aes ) , wpa2 psk ( tkip / aes ) , easy setting: wep ( 64 / 128 bit ) , connection mode: wps, model: drc 225, make:canon 14 document scanner desktop sheet fed scanner, document size: plain paper, u turn path: width: 50.8 to 216mm, length: 70 to 356mm, straight path: width: 50.8 to 216mm, length: 53.9 to 356mm, use long document mode to scan documents :3 000mm long, business card 50 x 53.9mm vertical feeding only, plastic card 53.9 x 85.5mm ( iso standard ) . embossed cards can be scanned document thickness: plain paper , u turn path: 52 128g / m2 ( 0.06 0.15mm ) , straight path: 40 209g / m2 ( 0.05 0.25mm ) , business card 300g / m2 0.35mm , plastic card 0.76mm , document feeding automatic sheet feeding, feeding capacity 6mm stack ( including curls ) or 30 sheets of 80g / m2, scanning element cmos cis, light source led ( red, green, and blue ) , scanning side simplex / duplex, scanning modes black and white, error diffusion, advanced text enhancement, advanced text enhancement ii ( for windows only ) , 256 level grayscale, 24 bit colour, scanning resolutions *1 150 x 150dpi, 200 x 200dpi, 300 x 300dpi, 400 x 400dpi, 600 x 600dpi, scanning speed *2, ( a4 / l, portrait, 200dpi ) simplex: 25ppm, duplex: 50ipm, interfaces hi speed usb 2.0, software windows: isis / twain driver, capture on touch, presto! biz card, omni page, paper port, ecopy pdf pro office, evernote*2, mac *3: twain driver, capture on touch, presto! biz card, presto! page manager, evernote*2, power requirements ac100 to 240v ( 50 / 60hz ) , power consumption, scanning: 12.8w , sleep: 1.8w, off: 0.5w, scanning: 15.6w , sleep: 4.4w , off: 0.5w, operating environment temperature: 10°c to 32.5°c, humidity: 20% to 80% rh, options / consumables flatbed scanner unit 102 ( dr c225 ii only ) , exchange roller kit ( feed roller and retard roller ) , basic wirelesslan specifications, ( dr c225w ii only ) wireless standard: ieee802.11b / g / n ( 2.4ghz only ) , frequency: 2.4ghz band, transfer method: ieee802.11b: ds ss system, ieee802.11g: ofdm system, data rate*4: ieee802.11n: mimo ofdm system, ieee802.11b: up to 11mbps, ieee802.11g: up to 54mbps, ieee802.11n: up to 300mbps. security: wpa psk ( tkip / aes ) , wpa2 psk ( tkip / aes ) , easy setting: wep ( 64 / 128 bit ) , connection mode: wps, model: drc 225, make:canon 15 mosquoto net make: oem 16 notice board 4x3 make: oem 17 table top desk make: oem 18 2 ton split air conditioner model: 245v adz ( r32 ) or higher with drainage and copper pipe and installation and their accessories. model: 245v adz ( r32 ) , make voltas, lg 19 stabilizer for ac make: v guard 20 cassette ac capacity – cooling ( tr ) : 2.0, capacity – cooling ( w ) : 6850, power supply ( v ph hz ) : 230 1 50, input power cooling ( w ) : 1910, rated current cooling ( a ) : 9.8, compressor ( type ) : twin rotary bldc , indoor air flow ( hi / mi / lo ) ( m3h ) : 1300 / 1000 / 850, indoor noise level ( hi / mi / lo ) ( dba ) : 46 / 40 / 37, operation: wireless lcd remote, idu dimension unit ( wxhxd ) cm: 84x20.5x84, idu dimension packing ( wxhxd ) cm: 90x22.5x90, idu weight net ( kg ) : 22.6 , idu weight gross ( kg ) : 27.3, grill dimention unit ( wxhxd ) cm: 95x5.5x95, grill dimension packing ( wxhxd ) cm: 103.5x9x103.5, grill weight net ( kg ) : 6 , grill weight gross ( kg ) : 9 , outdoor coil: fin & tube, outdoor dimention unit ( wxhxd ) cm: 89x67.3x34.2, outdoor dimention packing ( wxhxd ) cm: 99.5x75x43.5, outdoor weight net ( kg ) : 38.2, outdoor weight gross ( kg ) : 44.6, inter connecting pipe suction ( cu ) :15.88mm, inter connecting pipe liquid ( cu ) : 9.52mm, refrigerant type: r32, airflow: 360 airflow, air filter: anti dust. make; voltas / mitsubishi / blue star ...

Central Coalfields Limited - Jharkhand

29702625 bids are invited for wheel chair material : stainless steel ( 16 gauze ) folding stretcher backrest : with cushion leatherite dining table 4 seater seating : with cushion leatherite dining table 8 seater leg guard type : swinging and detachable vip chair type of back rest : foldable dining chairs hand rim diameter : 16 x 1.2 mm dressing table total weight of wheel chair ( kg ) : 16 bed density of cushoin : 30 visitor chair ( leatherite ) leg guard width : 650 mm writing pad chair hand rim tube thickness : 1.5 mm visitor chair ( cantilever ) front castor diameter ( mm ) : 240 mm office chair ( non revolving ) overall width in unfolded : 700 mm executive table ( big size ) type of wheel hub : aluminum executive table ( g.m ) hand rim material : aluminum revolving chair ( vvip ) diameter of axle ( mm ) : 24 inch computer table seat depth ( mm ) : 500 mm steel almirah big type of braking system : clutch steel almirah small ms parts available : no ( only steel ) ...

Central Coalfields Limited - Jharkhand

29395604 bids are invited for wheel chair material : stainless steel (16 gauze) , folding stretcher backrest : with cushion leatherite , dining table 4 seater seating : with cushion leatherite , dining table 8 seater leg guard type : swinging and detachable , vip chair type of back rest : foldable , dining chairs hand rim diameter : 16 x 1.2 mm , dressing table total weight of wheel chair (kg) : 16 , bed density of cushoin : 30 , visitor chair (leatherite) leg guard width : 650 mm , writing pad chair hand rim tube thickness : 1.5 mm , visitor chair (cantilever) front castor diameter (mm) : 240 mm , office chair (non revolving) overall width in unfolded : 700 mm , executive table (big size) type of wheel hub : aluminum , executive table (g.m) hand rim material : aluminum , revolving chair (vvip) diameter of axle (mm) : 24 inch , computer table seat depth (mm) : 500 mm , steel almirah big type of braking system : clutch , steel almirah small ms parts available : no (only steel) total quantity : 1...

Urban Development Department - Jharkhand

28925684 development of pundag park in front of dream tower at ranchi. development of pundag park in front of dream tower at ranchi. , labour for cleaning the work site before and after work etc. , earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item a) and disposal of excavated earth a obtained to a distance up to 50m including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of e/i. , extra for earth work in hard soil as per specification and direction of e/i. (vide classfication of soil item b) , earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5m all complete as per building specification and direction of e/i. (mode of measurement compacted volume). , providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, labour, rotalty and taxes all complete as per building specification and direction of e/i (mode of measurement compacted volume). , providing designation 75b brick work in c.m. (1:6) in foundation and plinthwith approved quality of clean coarse sand of f.m. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening maerials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of e/i. , providing designation 75a brick work in c.m. (1:6) in superstructure with approved quality of clean coarse sand of f.m. 2 to 2.5 including providing 10mm thick mortar joints, costs of screening, materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of e/i. , providing designation 75 b brick work in c.m. (1:6) in superstructure with approved quality of clean coarse sand of f.m. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of e/i. , providing designation 125mm thick reinforced designation 75a brick work in (1:4) in superstructure with approved quality of clean coarse sand of f.m. 2 to 2.5 including the cost of screening carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement0 all complete as per building specification and direction of e/i. , providing p.c.c. m 150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and mixing cement sand of f.m 2.5 to 3 including screening, shuttering, vibrating, skirting, curing, taxes and royalty all complete all complete as per specification and direction of engineer incharge. , providing p.c.c. m 100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade iii (50 mm to 25mm size) clean coarse sand of f.m 2.5 to 3 including screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, skirting, curing, taxes and royalty all complete all complete as per building specification and direction of engineer incharge. , providing p.c.c./r.c.c. m 200 with normal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of e/i , providing r.c.c. m 200 in band at plinth level with nominal mix of (1:1.5:3) of approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of e/i. , providing r.c.c. m 200 with nominal mix of (1:1.5:3) in band at lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of e/i. , providing r.c.c. m 200 with nominal mix of (1:1.5:3) in lintel with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of e/i. , providing r.c.c. m 200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of e/i. , providing r.c.c. m 200 with nominal mix of (1:1½:3) in beam of all types with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of e/i. , providing r.c.c. m 200 with nominal mix of (1:1.5:3) in stiffners with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m. 2.5 to 3 including screening, shuttering mixing cement concrete in mixes and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete as per building specification and direction of e/i. , providing r.c.c. m 200 with nominal mix of (1:1½:3) in columns withapproved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of e/i. , providing av. 63mm thick r.c.c. m 200 with nominal mix of (1:1.5:3) chajja with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m. 2.5 to 3 including making drip course in concrete, screening, centering, shuttering and mixing cement concrete in mixer and placing in position, vibrating, striking 6mm cement plaster (1:4) in ceiling and sides of chajja with sand of f.m. 1.5 curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of e/i. , centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete , centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers , centering and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts , suspended floors, roofs, landings, balconies and access platform , providing precast r.c.c. m 200 with nominal mix of (1:1.5:3) slab of desired size with approved quality of stone chips and clean coarse sand of f.m. 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of e/i. , s/f 35mm thick solid core type non decorative single leaf flush door and windows with black board core banded with high quality phenol formaldehydes synthetic resin both side commercial veneered of standard make with oxidized iron fittings such as hinges, sliding door bolts tower bolts, handles or rings hooks and eyes, cleats sand block as per schedule taxes and royalty all complete as per building and direction of e/i. , providing toe steel reinforcement of 8mm dia to 32mm dia rods as approved design and drawing excluding carriage of m.s. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of e/i. tmt fe 500 (only valid for sail & tata steel)8# @ , 10# @ , 12# 25# @ , s/f m.s. grill made of 20 x 6mm m.s. flat as per approved design and drawing, properly fabricated with joints continous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction ofe/i. (where materials is not supplied by the deptt.) , providing and fixing fan hooks of 16mm dia m.s. bar & 1 meter long, bent torequired size and shape, placed in position and fixed in the r.c.c.slab/beam at the time ofcasting all complete as per building specification and direction of e/i. , labour for hoisting, placing and fixing in position r.s. joist or tee including cutting to required shape and size straightening all complete job (but excluding the cost of joist or tee) as per direction of e/i. , providing designation 75a one brick flat soling joints fitted with local sand including cost of watering taxes royalty all complete as per building specification and direction of e/i. , providing designation 75 b one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of e/i. , providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to is: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3kg/sqm including grouting thejoints with white cement and matching pigments etc., complete size of tile 500x500 mm , providing 12mm thick cement plaster (1:6) with clean coarse sand of f.m. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of e/i. , providing 12mm thick cement plaster (1:6) with clean coarse sand of f.m. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of e/i. , providing 6mm thick cement plaster (1:4) in ceiling with clean of f.m. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of e/i. , providing 25mm thick water proof cement plaster (1:3) with clean coarse sand of f.m. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of e/i. , providing two coat of oil bound distemper of approved shade and make over a primer coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding, washing floors and taxes all complete as per building specification and direction of e/i. , providing two coat of snowcem shade and make over a coat of cement of primer on new surface including preparing the plastered surface smooth with sand paper, soaping, curing and taxes all complete as per building specification and direction of e/i. , providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales, smokes, grease and sand preparing, including cost of scaffolding and taxes all complete as per building specification and direction of e/i.multiplying factor 1.2 (for each side) as per table 1 [is:1200] , providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of e/i. (mode of measurement area shall be multiplied by the co efficient as indicated in building specificatio).multiplying factor 1.0 (for painting all over) , providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all complete as per building specification and direction of e/i.multiplying factor 1.0 (for painting all over) , making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20mm nominal size ) over 75mm bad by dry brick ballast 40mm nominal size well rammend and consolidated and grouted with fine sand including finishing the top smooth. , providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. granite of any colour and shade , stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. , supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 part 1 and m.s. top cover of required thickness for rolling shutters.80x1.25 mm m.s. laths with 1.25 mm thick top cover , providing and fixing pressed steel door frames conforming to is: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold ofmild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressedmild steel welded or rigidly fixed together by mechanical means, includingm.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplateand shock absorbers as specified and applying a coat of approved steelprimer after pre treatment of the surface as directed by engineerin charge:profile b fixing with adjustable lugs with split end tail to each jamb , steelworkweldedinbuiltupsections/framedwork,includingcutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works , chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). light shade pigment using white cement , providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar1:4 (1 cement : 4 coarse sand) and finished neat complete. , finishing walls with textured exterior paint of required shade new work (two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied@ 2.20kg/10 sqm , finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade : new work (two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primerapplied @ 2.20 kg/ 10 sqm) , providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. , providing and fixing g.i. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction ofengineer in charge. made of g.i. wire of dia. 4 mm, pvc coated to achieve outer dia not less than 5 mm in required colour and shade , providing and laying matt finished vitrified tile of size 300x300x9.8mm having water absorption less than 0.5% and conforming to is: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of engineer in charge. , providing and laying factory made chamfered edge cement concretepaver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer in charge.80 mm thick c.c. paver block of m 30 grade with approved color design and pattern. , providing and laying factory made chamfered edge cement concrete paver blocks in foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturers specifications & direction of engineer in charge.60mm thick cement concrete paver block of m 35 grade with approved colour, design & pattern , providing and fixing chlorinated polyvinyl chloride (cpvc) pipes,having thermal stability for hot & cold water supply including all cpvcplain & brass threaded fittings this includes jointing of pipes & fittingswith one step cpvc solvent cement, trenching, refilling & testing ofjoints complete as per direction of engineer in charge. 50 mm nominal outer dia pipes , 25 mm nominal outer dia pipes , 15 mm nominal outer dia pipes , 15 mm nominal outer dia pipes , providing and placing on terrace (at all levels) polyethylene water storage tank isi : 12701 marked withcover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 5 storage tank of 1000 litres , providing and supplying high density polyethyene pipe (hdpe pipe) of 20 mm to 225 mm od and pressure 6.0 kg/cm2 and 10 kg/cm2 sutable ford water supply which is available in all standard, like isi 4984, iso 4427 din 8074 and various grades like pe 63, pe 80, pe 100 and newly invented pe 100+ materials rates are exfactoryexcluding transpotation, taxes and duties,contractor profit and overhead charges.note : cst @2% against form c and 4% without formc would be charged extra. b hdpe pipe of materials grade pe80 pn10 (dia in mm) 25 mm pipe , supplying, assembling, lowering and fixing in vertical position in borewell,unplasticizedpvcmediumwellcasing(cm)pipeof required dia, conforming to is: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of engineer in charge.200 mm nominal size dia , development of tube well in accordance with is : 2800 (part i) andis: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by v notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of engineer in charge , providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia , providing and fixing m.s. clamp of required dia to the top of casing/ housing pipe of tubewell as per is: 2800 (part i), including necessary bolts & nuts of required size complete.200 mm clamp , excavation in soil using hydraulic excavator ck 90 and tippers with disposal upto 1000 metres. (excavation for roadwork in soil with hydraulic excavtor of 0.9 cum bucket capacity including sutting and loading in tippers, trimming bottom and side slopes, in accordance with reuirements of lines, grades and cross sections, and transporitng to the embankement location within all lifts and lead upto 1000m) , compacting original groundcase ii compacting original ground supporting embankment. rolling with smooth wheeled roller , cast in situ cement concrete m20 kerb (construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in m 20 grade pcc on m 10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408) , cost of drilind 200 mmx165mmx125 mtr.deep bore well in all kind of soil and rock in rural area for instalation of pump set with hydrolic dth rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to site.(a) from 0.00 m to 50.00 m below g.l. , (b) from 51.0 m to125.00 m , (c) from126.0 m to150.00 m , supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to is 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. motor suitable for working on 415 + 10, 3hp, 50 hz, ac supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. the pump set shall be suitable for diret coupling pump shall have suitable outlet as per manufacturers design. anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump.submersible pump set 100mm dia (with polypropylene/noryl impeller) up to 20 stages2 hp , supplying fitting angles size in mm as per i.s. 226 , bricks lead = 1 k+7 p(8km) , sand lead = 47 km , stone chips lead = 22 km , stone metal lead = 22 km , local sand lead = 3km , earth 5 km , supplying fitting and fixing 3 crore 4 sqmm flat copper submersible cable finolex / hevels make including all taxes ,royalty etcall complete job as per direction of e/i. , supply & fitting bib cock long thread , a) planting permanent hedges including digging of trenches (planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart) , maintenance of hedge for one year , trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, byspreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). , supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment). , supplying and spreading of sand in lawn area, including watering, and dressing complete. , complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, edge, flower beds, foliages,creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide &fertilizers(whenever required) top dressing of lawn with good earth andmenure and maintenance of other garden related works as directed by office in charge (cost of good earth, manure, fertilizer, insecticide, pesticide, lawn mover and brush cutter with fuel & other t & p material/ articles shall be provided by the department.) play grounds / public parks , supplying and stacking at site dump manure from approved source, including carriage up to 1km (manure measured in stacks will be reduced by 8% for payment) , providing & laying selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming withrequired tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days ormore till the grass establish properly,as per direction of officer in charge , fine dressing of the groundas per instruction of e/i. , spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer in charge (cost of sludge, dump manure and/or good earth to be paid seprately , mixing earth and sludge or manure in the required proportion specified or directed by the officer in charge , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to150 mm measured , plantation of trees, shrubs, and hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excludingcast of plant & water)shrub plants , shrub plants , providing and fixing of tuflex garden fencing hexagonal net/or equivalent of green colour having contents ( weight grams/sqm. 510 (+/ 8%)) inwidth of 60 cm. with bamboo of 90 cm. length. the bamboo should be painted with green colour paint of approved brand and manufacture (two ormore coats) and fixed 30 cm. below ground level and 60 cm. above ground level at a distance of 1.50 mtrs. the net and bamboo should be binded with2 mm. g.i. wire at three places properly as per direction of engineer in charge. , providing and displaying of areca palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush greenfoliage in 20 cm size of earthen pot / plastic pot & as per direction of the officer in charge. , providing and displaying of schefflera high colour having ht. 25 cm to 30 cm, well developed with fresh & healthy foliage in 25 cm size of earthen pot/plastic pot & as per direction of the officer in charge. , providing and displaying plants allyssum white in full bloom well developed fresh & healthy plant in 20 cm earthen pot/plastic pot and as per directionof the officer in charge. , providing and displaying plants petunia hybrid different variety in different colour well developed with fresh and healthy foliage in full bloom in 25 cm earthen pot/plastic pot as per direction of the officer in charge. , providing and displaying plants dahlia double kenya variety in different colour well developed with 3 to 4 flowers in half bloom, good foliage stacked with green painted bamboo sticks, 45 to 60 cm height in 25 cm earthen pot/plastic pot and as per direction of the officer in charge. , providing and displaying plants dianthus dwarf in different colour fresh &healthy bloom in 20 cm earthen pot/plastic pot and as per direction of theofficer in charge. , providing and displaying plants marigold jaffri orange/yellow/russet colour well developed with fresh & healthy foliage with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm earthen pot/plastic pot and as per direction of the officer in charge. , providing and displaying plants missbranthemum in different colour well developed with fresh & healthy foliage in full bloom in 20 cm earthen pot/plastic pot and as per direction of the officer in charge. , providing and displaying plants nasturtium in different colour well developed with fresh & healthy foliage with full bloom in 20 cm earthen pot/plastic pot as per direction of the officer in charge.. , providing and displaying plants verbina in different colour having 30 to 45 cm ht., well developed with fresh & healthy foliage in bloom condition in 25 cm earthen pot/plastic pot and as per direction of the officer in charge. , providing and stacking of plant mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm earthen pot/plastic pot and as per directionof the officer in charge.. , providing and displaying budded rose (h.t. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in20 cm earthen pot, as per direction of the officer in charge. , providing and stacking of bottle palm of ht. 210 240 cm bottom girth 30 35 cm well developed in big hdpe bags. , providing and stacking of cassia siamea of height 150 165 cm. in big polybags of size 25 cm as per direction of the officer in charge. , providing and stacking of cassia javanica of height 120 150 cm. in big poly bags of size 25 cm as per direction of the officer in charge. , providing and stacking of delonix regia (gulmohar) of height 150 165 cm. in big poly bags of size 25 cm as per direction of the officer in charge. , providing and stacking of ficus benjamina (green) of height 150 165 cm., bushy with healthy branches and lush green foliage in big size hdpe bagsas per direction of the officer in charge. , providing and stacking of ficus bengalensis krishna of height 75 90 cm.,multibranched in earthen pots of size 30 cm as per direction of theofficer in charge , providing and stacking of grevillea robusta (silver oak) of height 150 165 cm. in big poly bags of size 25 cm as per direction of the officer in charge. , providing and stacking of polyalthia longifolia (ashok) of height 150 165cm. in earthen pots of size 25 cm as per direction of the officer in charge. , providing and stacking of saraca indica (sita ashok) of height 105 120cm. in big poly bags of size 25 cm as per direction of the officer in charge. , providing and stacking of schleichera trijuga (kusum) of height 150 165cm. in big poly bags of size 25 cm as per direction of the officer in charge. , supply and stacking of plant cassia biflora of height 60 75 cm. with 4 5 branches in poly bags of size 25 cm as per direction of the officer in charge. , providing and stacking of jasmine grandiflorum (chameli) of height 30 cmto 45 cm. in 20 cm size of earthen pots / plastic pots & as per direction ofthe officer in charge. , supply fitting and fixing of standered make starter pannel board with arrangement of all necsssury protection including all taxes ,royalty etcall complete job as per direction of e/i. , supply & fitting of shyamjyoti™ led based solar street lighting systemluminary : 12w led luminary luminary housing weather proof housing structure hot deep galvanized module pole : hot deep galvanized ms pole (4.5 mtr.)battery box : corrosion resistant painted power coated metal battery box other : suitable cable, etc.battery : 19.8ah 14.8v lithium ferro battery of mnre approved module : 75wp of hbl / gautam solar/iec equivalent(cost includes 10% cp & 5 % ohc) , the spiral slide is made up of fiber reinforced plastic (frp) in 3 parts with holding having shell thickness of 3 4 mm. the slide is supported on a center support of 80 nb gi pipe. the landing supports of the slide are supported by 20 nb pipes. the slide ladder is made up of 40 nb gi pipe & ladder hand railing is made up of 25 nb gi pipe. the triangular steps of the ladder are made up of 16 swg gi sheets. the safety railing of the slide is made up of 15 nb & 20 nb gi pipes. the trader and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. all the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. , the crescent slide is made up of fiber reinforced plastic (frp) having thickness of 3 4 mm with sufficient reinforcement given to acquire proper strength to the module. the platform is supported on vertical 80 nb powder coated gi pipes. the railing provided to the platform is made from lldpe and it is supported by 20 nb gi pipe. the ladder is made up of 25 nb gi pipe and with triangular steps of 16 swg. the ‘t’ support under the slide is made up of 80 nb gi pipe. the ladder of the slide is designed in such a way it won’t entrap child’s foot while playing. , the rainbow climber is made up of 40nb gi pipes. steps are made up of 20nb gi pipes. steps are equally distributed along the length of frame of rainbow climber. two symmetric halves are joined together by flat of 50 x 10 mm thk and 800 mm long. the radius for the each half is 2100 mm and it is grounded with the help of foundation angle of25x25x5mm. , the disc challenger consists of a frame made from two 80 nb powder coated gi pipes with base plate and top bar also of 80 nb gi pipe of required size. the pad is hanged with a 20 nb powder coated gi pipe on a specially designed nylon pipe clamp of 80 nb and 20 nb, with ‘s’ hooks. the conical pads are made in rotational molding. the pad is fitted onto ms circle of 4 5 mm thick with gi plating. the plate is grounded with a gi chain and 25 nb gi pipes attached to it. , the hopping pad gives children’s a good hopping experience. the hopping pad is made from rotational molded linear low density polyethylene (lldpe). the same is fixed to ms plate with gi plating welded and with 40 nb powder coated gi pipes of different lengths. , as the name suggests, this product has a combination of three products such as swing, slide and seesaw. the complete frame of this product is fabricated from 20 nb and 25 nb powder coated gi pipes. the slide in the combination set is made up of fiber reinforced plastic (frp). the slide landing support is made in 20 nb pipe. the slides are given a smooth finish so that the child does not hurt itself while playing on it. the bucket swing is made up of lldpe and is attached to a nylon rope. for the bucket swing a handle is given for gripping, which is made in rotational molding and out of lldpe. the see saw lever and stand is made up of 20 nb gi pipe. the see saw seat is made out of lldpe. the bearing used is of heavy duty bush type. , the frame of a to b climber consists of alphabet shape ‘a’ and ‘b’ which is made from 25 nb gi pipes. it has spacers of 20 nb gi pipes. it also consists of a ladder placed between ‘a’ and ‘b’ made from 20 and 25 nb gi pipes. all the pipes of the product are powder coated to avoid rusting of the pipes and for esthetic look. , the frame of a to b climber consists of alphabet shape ‘a’ and ‘b’ which is made from 25 nb gi pipes. it has spacers of 20 nb gi pipes. it also consists of a ladder placed between ‘a’ and ‘b’ made from 20 and 25 nb gi pipes. the whole product is powder coated to avoid rusting of the pipes and for esthetic look. the net climber is made up of nylon rope of 18 mm diameter which is attached by specially designed nylon clamps. these ropes are provided with pipe frame fabricated from 25 nb powder coated gi pipe. the rope is attached to “u” hooks welded to the frame. , the multi seater see saw comprises four rotational seats. the lever consists of 20 nb and 80 nb powder coated gi pipes. the bearing used in this product is heavy duty nylon bush type. the stand for see saw is made using 50 nb gi pipe. , pre cast concrete reinforcement bench (chair type bench with back rest) consisting of 2 nos. l shaped base support of thk. 100 mm, back height 1000 mm & front height 450 mm. base width – 620mm and 5 nos. reinforced concrete planks in specified colour, of size 1500x100x50, 1nd 1 no plank of size 1500x200x50 mm manufactured by using m30 grade of concrete & reinforced suitably to prevent damage during handling, transportation, erection and long use.all parts joined together with nuts & bolts of suitable size.bench top and bench planks are treated with paint erection of the bench to be done by us(cost includes 10% cp & 5 % ohc) , sprinkler:ketsy 771 gardening water sprinkler brass 3/4 size (trajectory angle 27 degree) , supply of water filter 3m make water filtermodel ecosip ias140s capacity 1 lac ltrs (cost includes 10% cp & 5 % ohc) , cinagro™ heavy duty 3 layered braided water hose pipe (size : 1/2 inch lenght : 30 meters) with 8 mode sprayer nozzle, garden, car wash, floor clean, pet bath, easy to connect...

Military Engineer Services - Jharkhand

25613608 provision of room for laundry including equipments under ge dipatoli 1 excavation in trenches n exc 1.5 m wide n exc 1.5 m deep and getting out in soft / loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 sqm on plan and not exc 1.5 m in depth and getting out. complete all as specified and directed. 2 removing excavated material to a distance n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed. 3 returning, filling in including spreading, leveling, watering and well ramming in layers n.exc.25 cm complete all as specified and directed. 4 m&l cement concret ( 1:4:8 ) type d 2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. 5 m&l reinforced cement concrete m 25 ( design mix ) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified. n 6 m&l reinforced cement concrete m 25 ( design mix ) as in columns, pillars, piers, posts and struts complete all as specified and directed. 7 m&l reinforced cement concrete in cement concrete m 25 ( design mix ) as in beams, cantilevers, bressumers, lintels over 1.5 m span complete all as specified. n 8 m&l reinforced cement concrete m 25 ( design mix ) as in slabs supported on walls, beams and columns , in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. 9 m&l precast cement concrete type b 1 ( 1:2:4 ) using 20mm graded stone aggregates, as in man hole cover slabs, shelves, and similar work set in cm ( 1:4 ) .complete all as specified and directed. 10 use and waste of formwork to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions surfaces finished fair as per clause 4.11.16.2 ( a ) of ssr part i complete all as specified. n 11 use and waste formwork to flat sides and soffits of floor or roof beams, beam haunchings, girders, bresumers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. surfaces finished fair complete all as specified. n 12 use and waste of formwork to fair surfaces of sides of concrete foundations, footings, bases of columns , raft and raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or to batter surfaces finished fair in forms complete all as specified. n n 13 use and waste of form work to flat soffits of suspended slabs, floor slabs, landings and similar work; not exceeding 200 mm thick ( horizontal or sloping ) surfaces finished fair in forms complete all as specified. n 14 use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs sides of rcc / pcc bands in walls , horizontal or sloping and similar work exc 10cm but n exc 20 cm wide, surfaces finished fair in forms complete all as specified. 15 m&l mild steel deformed or twisted bars ( tmt ) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.90 mm dia. or higher complete all as specified. n 16 m&l mild steel deformed or twisted bars ( tmt ) 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.90 mm dia. or higher complete all as specified. n 17 m&l mild steel bars ( tmt deformed / twisted ) 8mm dia. and over up to and including 10 mm dia. in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.90 mm dia. or securing with clips complete all as specified. 18 m &l for brickwork with sub class b old size bricks, straright or corved on plan exc 6m mean radius built in cement mortar ( 1:6 ) complete all as specified and as directed. 19 m&l brickwork with subclass b old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. 20 supply only liquid water proofing compound complete all as specified and directed. 21 m&l roof treatment for non approachable roof complete all as specified and directed comprising of followings: ( i ) rendering 10mm thick in cement mortor ( 1:3 ) mixed with liquid water proofing compound finished the surface fair and even. ( ii ) applying evenly a coat of bitumen primer @ 0.30 kg / sqm. ( iii ) applying app modified polymeric membrane over the bitumen coat surface , weight not less than 3.20 3.50 kg / sqm and over lap 100mm and sealed by torch application as per manufacture insteructions. ( iv ) applying a coat of aluminium paint @ 200 gm / sqm in two coats over polymeric membrene. 22 surface dressing in soft / loose soil n exc 15 cm deep trimming of natural ground ( removing vegetation / shurbs / brushwood. undergrowth and carring away rubbish to a distance of not exc 50 metre complete all as specified and directed. 23 m&l sand filling under floors or in foundation including watering and consolidation ( with lead of 50 m. for sand ) complete all as specified and directed. 24 m&l moorum / red bajri filling in floors or pavings, laid in floors n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed. 25 m&l for 100mm thickpcc ( 1:4:8 ) type d 2 using 40mm graded stone aggregate as in sub base complete all as specified and directed. 26 m&l for 75 mm thick pcc 1:3:6 type c 2 using 40mm graded stone aggregates, as in plinth protection and path etc finished cement concrete surface even and smooth without using extra cement all as specified. 27 m&l machine cut kota stone slab flooring 18 20 mm thick set over and including 15mm thick screed base in cm ( 1:6 ) , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishing complete all as specified and directed. 28 all as per item no 27 but here in before as in skirting set over and including 10mm thick cement plaster in cm 1:6 complete all as specified and directed.. 29 m&l white marble stone slab flooring 18 20 mm thick set over and including 15mm thick cement sceed base in cm 1:6 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishing complete as a boarder in the kota stone floorig all as specified and directed. 30 m&l machine cut cuddapa stone slab 20 25 mm thick, laid over 15mm thick cm ( 1:6 ) cement screed base, laid and jointed with grey ement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. 31 m&l rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:6 , top surfaces finished even and smooth without using extra cement complete all as specified n n 32 m&l rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4, mixed with using liquid water proofing compound complete all as specified ) , top surfaces finished even and smooth without using extra cement complete all as specified and directed. nnote : wpc measured and paid separately n 33 m&l rendering 10mm thick in cement mortar i:3 on fair face of cement concrete on ceiling, finished surface even and smooth without using extra cement complete all as specified n 34 m&l applying three coat of white wash on newly plastered surfaces of walls including washing floors, cleaning glass, joinery, electrical fittings, wiring etc. , of drops and splashes complete all as specified . 35 m&l two coats distempering with cement base paint , white or tinted over a coat of cement base primer on new surfaces of walls including washing floors, cleaning glass, joinery, electrical fittings, wiring etc. , of drops and splashes complete all as specified . n n 36 m&l preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery, electrical fittings, wiring etc. , of drops and splashes complete all as specified . n n 37 m&l for cement concrete 1:2:4 type b 1 ( using 20mm graded stone aggregate ) as in bed block for hold fast & filling in pressed steel door frame complete all as specified . 38 m&l for prepration of new steel surface not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified . 39 m&l for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. 40 s&f steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovatailed or welded as per is.1038:1983 ( amendment no.3 of may 2009 ) complete all as specified . 41 s&f steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovatailed or welded as per is.1038:1983 ( amendment no.3 of may 2009 ) complete all as specified . 42 m&l mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and / or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to fe 290 gde e 165 complete all as specified. n 43 s&f steel ventilator with top hung shutter incl. box type hinges with steel handle and steel peg stays complete with glazing bars welded as per is.1038:1983 ( amendment no.3 of may 2009 ) complete all as specified. 44 s&f 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified. 45 m&l galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average with of aperture 1.4mm and fixed withtinnwdtack, or galvanised wire staples complete all as specified. 46 s & f framed work as in door or gates of angle or other section with gusset plates rails, braces etc. complete, drilled for fixing of steel sheeting or other covering.door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering ) and hanging, also fastening and fixing complete all as specified. 47 m&l glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. ( without sash bars ) , edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in ssr part i, section 8, clause 8.20 ( a ) ; for doors supplied and fitted to chowkats complete all as specified and directed. 48 s&f plain framed, panelled shutter ( two panel ) factory made 35 mm thick of 2nd class hw rail and stylewith lock rail and panel of 9mm b.w.p. commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per is: 1003 ( part i ) , kiln seasoned and chemically pressure treated, . complete all as specified and directed. 49 s&f aluminium anodised barrel tower bolt 150mm long complete all as specified and directed. 50 s&f aluminium alloy, anodised handle cast type of size 125mm complete all as specified and directed. 51 s&f aluminium alloy, anodised sliding door bolt of size 250mm with hasp and staple and fixing clips of sheet complete all as specified and directed. 52 m / l butt hinges medium weight, cold rolled mild steel, and fixed 100mm long complete all as specified and directed. 53 m&l cement concret ( 1:3:6 ) typec 2 using 40mm graded stone aggregate as in surface channel and drain complete all as specified and directed. 54 m&l extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, mitred / stopped ends etc. complete all as specified and directed. 55 s&f 15mm dia. unplasticised pvc pipes of pressure rating 10 kg / cm2 fixed complete to walls, ceillings or in floors etc. complete all as specified and directed. 56 s&f 20mm dia. unplasticised pvc pipes of pressure rating 10 kg / cm2 fixed complete to walls, ceillings or in floors etc. complete all as specified and directed. 57 s&f gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe and fixed complete all as specified. n 58 s&f gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified. n 59 s&f stop valves, fancy type, cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified n 60 s&f chromium plated bib taps, cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified . n n 61 s&f ball brass valves, high pressure, with polyethylene float and flynut complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified. n n 62 s&f rotational moulded poly ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity , hoisted and fixed in position complete all as specified. n n 63 m&l pvc ( swr ) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or fixed to wall complete all as specified. 64 m&l pvc ( swr ) bend any radius 110mm dia complete all as specified. 65 m&l pvc ( swr ) tee any radius 110mm dia complete all as specified. 66 supply, installation, testing and commisioning of electric driven and integral electric heated, industrial washer cum extractor capacity 15 kg per cycle suitable for running on 3 phase 415 volts 50 hz, including all necessary accessories and components, mounted on self supporting rust proof frame with not less than 2 mm thick stainless steel body and all components of rust proof materials duly compatible for climatic conditions at ranchi. the machine shall be soft mounted and operatable to apply a minimum g force with following features complete all as specified ans as per manufacturers instructions: nmake : electrolux / stefab / fagor / unimac / fabcare / super shine / nagarjun as approved by the ge. n n n n 67 washer cylinder for washing, cleaning and extraction capacity 15 kg / cycle, complete electric driven and heated, front loading, heavy duty, heavy duty hot dip galvanized section frame, heavy duty rear gable and bearing support. both the inner and outer wash cylinders shall be constructed entirely using 2.0 mm thick stainless steel grade 304. 68 control : it shall have controlling panel with push button for selection of features. 69 detergent supply : the machines shall be available for use with powder or liquid detergents fed via integrated detergent dispensers . n 70 safety features: all machines shall be equipped with necessary safety interlock and warnings on the loading door. 71 auto weighing : automatic linen weighing system for automatic adjustment of water and soap consumptions as well as energy savings, according to the load inserted, measured automatically by the washer ) . 72 drive system : the machine shall have a motor powered by a vvvfdrive / vfd .there shall be no gearboxes, clutches or drive reducers. n 73 door opening: front loading not less than 400 mm ø 74 suppy, install test and commisoning of fully automatic industrial tumble dryer 15 kg linen capacity electric driven and electric heated, with integrated heating assembly, suitable for running on 3 phase 415 volts 50 hz, incl all necessary accessories and components, mounted on self supporting rust proof frame with complete stainless steel body n.less than 2.0 mm thick and all components of rust proof materials duly compatible for climatic conditions at ranchi with following features nmake : electrolux / stefab / fagor / unimac. fabcare / super shine / nagarjun as approved by the ge. n n 75 drying tumbler: capacity – 15 kg integral electric heated, electric vented, heavy duty, front loading, cool down feature, auto timed, auto / manually reversible dual motor drive, open pocket & front display. the dryer should be with temperature control system and the drum suspension should have sealed self lubricated bearings. 76 control : adjustable parameters such as temperature, programmes and cool down time and also the feature to control the residual moisture control in the linen. temperature and time controller shall be auto digital control with software for minimization of the cost and maximization of the up time of the equipment, which shall be able to capture features of a customised process and the drying programme shall be user friendly for editing / erasing preset programmes. drum–inner and outer drum should be made of stainless steel, 2 mm thick. 77 safety features : the tumble dryer should be equipped with overheating protection and a temperature sensor that turns off the heat if the air flow is clogged. n 78 door lock : the dryer should have a safety function or feature , which means the dryer should stops in case the door is opened during operation. transmission: the transmission should have pulley and belt or direct drive. there should be no gearboxes , clutches or gear reducers and the motor shall have vvvf / vf drive. n 79 door : made of die pressed stainless steel aisi not less than 2mm thick, toughened glass window , ss door latch / handle and interlock for safety. n 80 suction blower : heavy duty centrifugal suction blower and dynamically balanced. lint screen self cleaning lint screen, facility of cleaning should be through front 81 suppy, installation, testing and commisoning vaccum finising table utility shape for general purpose, with integral vacuum fan and steam electric iron and integral boiler, ac, 3 phase, 380 415v with rectangular vaccum ironing table having dimensions 1300mm ( width ) x 800mm ( depth ) x920mm ( height ) complete all as specified and as directed. nmake : fabcare / stefab / super shine / nagarjun as approved by the ge. 82 supply installing , testing and commisioning stream cum electric press complete all as specified and as directed. nmake : electrolux / stefab / fagor / unimac. fabcare / super shine / nagarjun as approved by the ge. 83 supply installing , testing and commisioning electrical stream boiler operate at ac, 3 phase, 380 415v, 50 hz suitable for operating mechanical laundry consisting as per item no 66 to 69 complete all as specified and as directed. nmake : thermax or other equivalent make as approved by the ge. 84 m&l for cpvc pipe, isi marked of required size and of approved make as per requirement of plant with required fittings complete for water lines for connection from source to individual machines like washer extractor, drier, flat bed press, ironing table with standard size pipe lines / cables as per manufacturers recommendations for efficient functioning of the equipments complete as directed. n 85 supply and fix mcb db, tpn 8 way ip 43 protection , double door , concealed on wall complete all as specified and as directed. nmake : indo asian / legrand / l & t / standard / havells / hpl as approved 86 s&f distribution board spn 230 volt, 4 way, double door type, concealed on wall suitable for mcb dp incomer and sp outgoing complete all as specified and as directed. nmake indo asian / legrand / l &t / standard / hpl as approved. 87 supply and fix mcb of follwing rating with necessary lugs for incomming and outgong connections fixed on db / enclosure / panel boards complete all as specified and directed. nmake : indo asian / legrand / l & t / standard / havells / hpl as approved. 88 mcb sp 6 to 32 amp 89 mcb dp 6 to 32 amp. 90 mcb 4 pole 6 to 32 amp. 91 s & f sheet metal tp and neutral enclosure with one mcb tp 6 to 32 amp and metal clad plug and socket ( rating of mcb suitable as per machine / load capacity ) amp and concelaled on wall complete all as specified n make : indo asian / legrand / l & t / standard / havells / hpl as approved. 92 s & f sheet metal dp enclosure with one mcb dp 16 amp and metal clad plug and socket ( rating of mcb suitable as per machine / load capacity ) concelaled on wall complete all as specified n make : indo asian / legrand / l & t / standard / havells / hpl as approved 93 m&l for sub main wiring with 4.0 run single core 4.0 sqmm pvc unsheathed copper multistranded conductor, frls , drawing into and including pvc conduit concealed medium grade of size not less than 20 mm dia with all fittings and fixtures like l bow, saddles etc of white / ivory colour pvc conduit including multi stranded copper earth conductor 4.0 sq mm , frls two run as earth continuty conductor complete all as specified and as directed. nnote : 4 run of cable and two run of earth conductor cable and conduit shall be measured as one length. 94 m / l for sub main wiring with 2.0 run single core 4.0 sqmm pvc unsheathed copper multistranded conductor, frls , drawing into and including pvc conduit concealed medium grade of size not less than 20 mm dia with all fittings and fixtures like l bow, saddles etc of white / ivory colour pvc conduit including multi stranded copper earth conductor 4.0 sq mm , frls one run as earth continuty conductor complete all as specified nnote : 2 run of cable and one run of earth conductor cable and conduit shall be measured as one length. 95 supply and lay cable xlpe insulated screened pvc bedded, galvanized steel strip or wire armored, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4 core.complete all as specified n ( make : polycab / havells / plaza as approved 96 excavation in trenches not exceeding 1.5 mtr deep and not exceeding 1.5 mtr width and getting out in hard / dense soil complete all as specified and as directed 97 returning filling in including spreading, leveling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified and as directed 98 removal of surface soil to a distance n.exc 50 m and deposited where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed 99 m & l river sand for cushioning for cable protection in trenches 8 cm before laying cable and 15 cm deep after laying of cable complete all as specified and as directed n ( note: punned thickness shall only be measured for payment ) 100 m&l laying well burnt old size bricks, sub class b bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. 101 m&l for point wiring complete as specified with 1100 v grade with 1.5 sq mm single core pvc insulated unsheathed frls cable, copper conductor multistranded passing through including concealed pvc conduit not less than 20 mm dia with concealed modular metal box sutable for switches , sockets , etc and with gi / ms box, 2.0 mm thickness concealed with necessary top plate of suitable size as required at site with pvc insulated frls unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dully as specified for folowing all as specified and as directed . 102 one light point controlled by one switch 103 one exhaust fan point controlled by one switch 104 5 amp switch socket on the same board. 105 5 amp switch socket on independent board. 106 all as per item no 85 above but size of cable 2.5 sq mm for 15 amps switch socket with earth wire of 2.5 sq mm and ditto 107 s&f switch 5 amps piano type 230 volts one way complete all as specified and as directed 108 s&f switch socket combination 5 amps flush type 230 volts one way acomplete all as specified and as directed n 109 s&f switch socket combination 5 / 15 amps flush type 230 volts one way complete all as specified and as directed 110 s&f ceiling rose surface backlite 65 x 50 mm two to three terminal suitable for 230 volts ac supply complete all as specified and as directed 111 s&f exhaust fan fan 230 volt 50 hz single phase ac supply , 300 mm sweep with louver complete with metal body powder coated with protective steel bird gaurd on wall including provision of 3 core 1.0 sq mm flexible cable from ceiling rose to exhaust fan including writing mes number on exhaust fan motor complete all as specified and as directed nmake: havells / almonard / bajaj. 112 supply & fix led tube light along with base frame , 18 w fixed on wall / ceiling complete all as specified and as directed by engineer in charge . nmake: havells / wipro / bajaj / philips / hpl / luker . 113 m & l earthing complete with galvanized steel earth plate electrode 600x600x6.0mm thick buried directly in ground ( earth pit not less than 2.25 meters deep below ground level ) with top edge of the plate not less that 1.5 meters below normal ground level connected to galvanized iron strip 25 x 4 mm as earthing by means of bolts nuts and washers of galvanized iron including excavation and earth work and disposal of surplus soil including 40 mm gi tubing light grade and necessary fittings for protection of gi strip including layong of charcoal , dust and common slat , pcc 1:2: 4 type b 1 using 320 mm graded aggregate with earth pit with 40 x 40 x 6.0 mm ms angle iron frame rcc cover 40 mm thick ( 1:2: 4 ) type c1 using 20 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75 mm c / c both way with ms handle 20 mm dia plastering 15 mm thick cm ( 1: 6 ) internally and up to 150 mm below ground level externally . pgi funel with wire mesh 20 mm dia gi pipe for watering complete all as shown on electrical plate no : 03 of ssr part i 2009 and connected to earth test point including testing complete all as specified and as directed...

Government Polytechnic - Jharkhand

25608730 supply of equipment 1.01 ohm’s laws apparatus with in built power supply 1.02 kirchoffs law apparatus 1.03 superposition theorem apparatus. 1.04 thevenin’s and norton’s theorem apparatus 1.05 maximum power transfer theorem apparatus 1.06 connection and measurement of power consumption of various lamps. 1.07 experement : hartley oscillator 1.08 v i characteristics of incandescent lamps and time fusing current characteristics of a fuse. 1.09 calculation of current, voltage and power in series r l c circuit excited by single phase ac supply and calculation of power factor. 1.10 verifying b h curve of an electromagnet. 2 network theory lab 2.01 to observe a.c. wave form on c.r.o. and calculates average & r.m.s. values, frequency, and observe the response of resistance to ac 2.02 experement : study of lead & leg network in ac circuits to observe response of inductor and capacitor to ac 2.03 experement : calculation of impedance in ac circuit to determine impedance & plot the phasor diagram of r l series circuit. 2.04 experement : calculation of power & power factor in rc ac circuit to determine the current and p.f. of r.c. series circuit. 2.05 experement : calculation of power & power factor in rlc ac circuit to determine the current and p.f. in r.l.c. series circuit. 2.06 experement : rlc series resonance with inbuilt sine wave oscillator 2.07 experement : rlc parallel resonance with inbuilt sine wave oscillator 2.08 experement : calculation of power & power factor in rc ac circuit 2.09 experement : rlc parallel resonance with inbuilt sine wave oscillator to determine the current. in r.l.c. parallel circuit. 2.10 experement : rlc parallel resonance with inbuilt sine wave oscillator to obtain resonance in r l c parallel circuit. 2.11 experement : measurement of power in balanced load using two watt meter method in three phase circuit. to verify the line and phase values for star connected balanced load. 2.12 experiment : study of voltage & current relationship in three phase circuits. 2.13 superposition theorem apparatus. 2.14 thevenin’s and norton’s theorem trainer 2.15 maximum power transfer theorem apparatus with three power supplies. 3 electronics lab 3.01 forward & reverse characteristics of pn junction diode 3.02 characteristics of zener diode 3.03 study of rectifiers ( half wave & full wave ) & filters ( capacitor & inductor filter ) 3.04 input & output characteristics of transistor in ce mode 3.05 characteristics of fet 3.06 characteristics of ujt 3.07 load & line regulation characteristics of regulator 3.08 frequency response of single stage rc coupled amplifier. 3.09 to study the v i characteristics of pn junction diode. 3.10 determination of h parameter. 3.11 to verify the truth table of logic gates realize and, or, not gates. 3.12 to realize and, or gates using diodes and resistors. 3.13 to verify the boolean algebra function using digital ic gates ( consensus theorem ) . 3.14 to realize the function f ( a, b, c, d ) = ( c+d ) ( a+b ) ( b+d ) neither using nor gates. 3.15 design a half / full adder circuit using logic gates. 3.16 design a half / full subtractor circuit using logic gates. 3.17 design a binary to gray code converter. 3.18 design a function using k map and verify its performance using sop & pos. 3.19 design bcd to seven segment display using 7447 ic. 3.20 experiment : study of 4 bit & 16 bit multiplexer 3.21 to study 8085 based microprocessor system 3.22 to load content in one register and shift it to another. 3.23 to move the content of one memory location to another. 3.24 to develop and run a program for finding out the largest / smallest number from a given set of numbers. 3.25 to develop and run a program for arranging in ascending / descending order of a set of number 3.26 to perform multiplication / division of given numbers. 3.27 to perform floating point mathematical operations ( addition, subtraction, multiplication, and division ) . 3.28 to perform computation of square root of a given number. 4 instrumentation system lab / electronics measurements 4.01 to determine output characteristic of a lvdt and determine its sensitivity. 4.02 study characteristics of temperature transducer like thermocouple, thermister and rtd with implementation of small project using signal conditioning circuit. 4.03 study characteristics of light transducer like photovoltaic cell, phototransistor and photodiode with implementation of small project using signal conditioning circuit. 4.04 to study input output characteristics of a potentiometer and use of two potentiometers as an error detector. 4.05 adc converter 4.06 dac converter 4.07 measurement of passive elements r , l and c using bridge networks 4.08 study of transducers and characterization power electronics lab 5.01 study of voltage – current characteristics of thyristor 5.02 study of full wave rectifier using scr 5.03 study of parallel inverter using scr. 5.04 study of bridge rectifier using scr 5.05 study of series inverter using scr. 5.06 study of chopper using scr 5.07 study of circuit breaker using scr 5.08 study of battery charger using scr 5.09 speed control of dc series motor 6.01 measurement of current and voltages by low range ammeter and voltmeter respectively with shunt and multiplier. 6.02 calibration of wattmeter at various power factors by standard wattmeter 6.03 measurement of power in three phase circuits measurement of active power in three phase balanced load by single wattmeter method. 6.04 measurement of power in three phase circuits using two watt meters. 6.05 measurement of power in three phase circuits using voltmeters & ammeters. measurement of three phase power with 3 ammeters and 3 voltmeters. 6.06 calibration of energy meter at various power factors by standard energy meter. 6.07 measurement of energy in single phase & three phase balanced load using electronic energy meter. 6.08 measurement of low resistance by kelvins double bridge. 6.09 measurement of medium resistance by wheatstone bridge 6.10 measurement of resistance, voltage, current, voltage, current in a.c & d. c. circuit by using digital multimeter. 6.11 to measure linear displacement by lvdt and plot characteristics. 6.12 measurement of inductance by maxwell bridge 6.13 measurement of capacitance by schering bridge 6.14 measurement of inductance by hay bridge 7 digitalcommunication 7.01 observe waveforms of pulse amplitude modulation ( using natural sampling & flat top sampling ) . 7.02 observe waveforms of pulse width modulation 7.03 observe waveforms of pulse position modulation. 7.04 observe waveforms of pulse code modulation and demodulation. 7.05 observe waveforms of ask modulation & demodulation. 7.06 observe waveforms of fsk modulation & demodulation. 7.07 observe waveforms of psk modulation & demodulation. 7.08 observe wave forms of qpsk modulation & demodulation. 7.09 observe wave forms of qam modulation & demodulation. 8 communication system 8.01 observe am the am signal on spectrum analyzer 8.02 observe fm wave & calculate modulation index. 8.03 am radio receiver. 8.04 voltage wave form analysis at various points in am receiver 8.05 observe input & output waveforms of am detector. 8.05 observe input & output waveforms of am detector. 8.06 plot graph of sensitivity of receiver. 8.07 plot graph of selectivity of receiver. 8.08 plot graph off fidelity of receiver 8.09 fault finding of am radio receiver. 8.10 fm detector characteristics. 8.11 measure the length of directors, reflectors, dipoles and spacing between the yagi uda antenna andc compare with the theoretical value. 9 control system lab 9.01 transfer function of first and second order system 9.02 sensors system control system study m lab platform. 01 9.03 ac position servo system study 9.04 dc position servo system study 9.05 control through magnetic amplifier 9.06 measurement of passive elements r , l and c using bridge networks 9.07 study of transducers and characterization 9.08 digital simulation of linear systems 9.09 stability analysis of linear system using matlab or equivalent software 9.10 study the effect of p, pt, pid controllers using matlab or equivalent software or witl conventional methods. 10 strength of material lab 10.01 young’s modulus apparatus 10.02 torsion of steel beam apparatus 10.03 flexure testing machine 100kn digital 10.04 euler’s load buckling testing machine 11 surveying lab 11.01 optical square 11.02 to verify law of polygon of forces 11.03 digital tachometer 11.04 digital planimeter 12 building materials lab 12.01 vickers hardness tester 12.02 mortar mixer automatic / manual 12.03 concrete mixer with cube mould 13 geo technical engineering lab 13.01 sand replacement method 13.02 laboratory permeability apparatus falling head & constant head 13.03 standard compaction test app. 14 hydraulics lab 14.01 channel section having sudden change in slope for the formation of hydraulic jump or hydraulic jump apparatus ( tilting flume apparatus ) 2.5 meter 14.02 pitot tube apparatus 14.03 reynolds apparatus to study the types of flow 14.04 determine the darcy’s law apparatus 14.05 hydraulic ram apparatus 14.06 apparatus to determine orifice and mouthpiece 14.07 current water meter apparatus 14.08 dead weight pressure gauge tester 14.09 venturimeter test rig 14.10 orificemeter test rig 14.11 francis turbine test rig 14.12 kaplan turbine test rig 14.13 bernoulli’s apparatus 14.14 losses in pipe and fitting apparatus 14.15 closed circuit pipe friction apparatusfriction losses in pipe 14.16 centrifugal pump test rig 14.17 reciprocating pump test rig. 14.18 pelton wheel test rig 15 transportation engineering lab 15.01 aggregate impact tester 15.02 softening point of bitumen 15.03 flash & fire point of bitumen 15.04 penetration test on bitumen 15.05 bankleman beam method 16 laboratory test for highway material: 16.01 marshall stability test apparatus 17 advance surveying lab 17.01 stadia tachometer 17.02 gps survey 18 environmental engineering lab 18.01 bod test analyzer 18.02 cod test analyzer 19 advance structure lab ( elective ii ) 19.01 three hinged arch apparatus 19.02 three bar pin jointed truss 19.03 betti’s theorem / elastic properties of deflected beam apparatus 19.04 maxwell reciprocal theorem apparatus 19.05 begg’s deformeter set apparatus 19.06 suspension load apparatus 19.07 cantilever beam 19.08 portal frame apparatus 19.09 redundant frame joint apparatus 19.10 behaviour of column & struts apparatus 19.11 deflection of truss apparatus 19.12 two hinged arch apparatus 19.13 shear force, loading & bending moment apparatus 20 industrial fluid power lab 20.01 demonstrator ofmeter in and meter out circuit. 20.02 demonstrator of design, prepare & operate of sequencing circuit. 20.03 demonstrator of hydraulic circuit for shaper machine. 20.04 demonstrator of pneumatic circuit for speed control of double acting cylinders. 20.05 demonstrator of pneumatic circuit for speed control of pneumatic motor 21 theory of machine lab 21.01 to find the ratio of time of cutting stroke to the time of return stroke for quick return mechanism of a shaper machine 21.02 sketch & describe working of bicycle free wheel sprocket mechanism. 21.03 determination of power transmitted by any belt drive using any one dynamometer. 21.04 balancing of several masses rotating in a single plane by graphical method. 22 thermal engineering lab 22.01 study of solar water heating system. 22.02 trace the flue gas path and water steam circuit with the help of boiler model and write are port. 22.03 determination of change in velocity of steam with steam nozzle. 23 engineering mechanics lab 23.01 to verify force transmitted by members of truss 23.02 find ma, vr, efficiency, ideal effort, effort lost in friction for various loads andestablish law of machine and calculate maximum efficiency of differential axle andwheel 24 automobile engineering lab 24.01 universal joint. 24.02 battery and function of charger. 24.03 study of ignition system...

East Central Railway - Jharkhand

23839506 supply of , cantilever tool box (3 compartments) h 155 mm, w 200 mm, l 450 mm as per taparia product no. ctb1803. make/brand taparia or similar....

Military Engineer Services - Jharkhand

23384798 providing of room for laundry including equipments under ge dipatoli 1 excavation in trenches n exc 1.5 m wide n exc 1.5 m deep and getting out in soft / loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 sqm on plan and not exc 1.5 m in depth and getting out. complete all as specified and directed. 2 removing excavated material to a distance n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed. 3 returning, filling in including spreading, leveling, watering and well ramming in layers n.exc.25 cm complete all as specified and directed. 4 m&l cement concret ( 1:4:8 ) type d 2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. 5 m&l reinforced cement concrete m 25 ( design mix ) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified. n 6 m&l reinforced cement concrete m 25 ( design mix ) as in columns, pillars, piers, posts and struts complete all as specified and directed. 7 m&l reinforced cement concrete in cement concrete m 25 ( design mix ) as in beams, cantilevers, bressumers, lintels over 1.5 m span complete all as specified. n 8 m&l reinforced cement concrete m 25 ( design mix ) as in slabs supported on walls, beams and columns , in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. 9 m&l precast cement concrete type b 1 ( 1:2:4 ) using 20mm graded stone aggregates, as in man hole cover slabs, shelves, and similar work set in cm ( 1:4 ) .complete all as specified and directed. 10 use and waste of formwork to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions surfaces finished fair as per clause 4.11.16.2 ( a ) of ssr part i complete all as specified. n 11 use and waste formwork to flat sides and soffits of floor or roof beams, beam haunchings, girders, bresumers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. surfaces finished fair complete all as specified. n 12 use and waste of formwork to fair surfaces of sides of concrete foundations, footings, bases of columns , raft and raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or to batter surfaces finished fair in forms complete all as specified. n n 13 use and waste of form work to flat soffits of suspended slabs, floor slabs, landings and similar work; not exceeding 200 mm thick ( horizontal or sloping ) surfaces finished fair in forms complete all as specified. n 14 use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs sides of rcc / pcc bands in walls , horizontal or sloping and similar work exc 10cm but n exc 20 cm wide, surfaces finished fair in forms complete all as specified. 15 m&l mild steel deformed or twisted bars ( tmt ) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.90 mm dia. or higher complete all as specified. n 16 m&l mild steel deformed or twisted bars ( tmt ) 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.90 mm dia. or higher complete all as specified. n 17 m&l mild steel bars ( tmt deformed / twisted ) 8mm dia. and over up to and including 10 mm dia. in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.90 mm dia. or securing with clips complete all as specified. 18 m &l for brickwork with sub class b old size bricks, straright or corved on plan exc 6m mean radius built in cement mortar ( 1:6 ) complete all as specified and as directed. 19 m&l brickwork with subclass b old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. 20 supply only liquid water proofing compound complete all as specified and directed. 21 m&l roof treatment for non approachable roof complete all as specified and directed comprising of followings: ( i ) rendering 10mm thick in cement mortor ( 1:3 ) mixed with liquid water proofing compound finished the surface fair and even. ( ii ) applying evenly a coat of bitumen primer @ 0.30 kg / sqm. ( iii ) applying app modified polymeric membrane over the bitumen coat surface , weight not less than 3.20 3.50 kg / sqm and over lap 100mm and sealed by torch application as per manufacture insteructions. ( iv ) applying a coat of aluminium paint @ 200 gm / sqm in two coats over polymeric membrene. 22 surface dressing in soft / loose soil n exc 15 cm deep trimming of natural ground ( removing vegetation / shurbs / brushwood. undergrowth and carring away rubbish to a distance of not exc 50 metre complete all as specified and directed. 23 m&l sand filling under floors or in foundation including watering and consolidation ( with lead of 50 m. for sand ) complete all as specified and directed. 24 m&l moorum / red bajri filling in floors or pavings, laid in floors n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed. 25 m&l for 100mm thickpcc ( 1:4:8 ) type d 2 using 40mm graded stone aggregate as in sub base complete all as specified and directed. 26 m&l for 75 mm thick pcc 1:3:6 type c 2 using 40mm graded stone aggregates, as in plinth protection and path etc finished cement concrete surface even and smooth without using extra cement all as specified. 27 m&l machine cut kota stone slab flooring 18 20 mm thick set over and including 15mm thick screed base in cm ( 1:6 ) , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishing complete all as specified and directed. 28 all as per item no 27 but here in before as in skirting set over and including 10mm thick cement plaster in cm 1:6 complete all as specified and directed.. 29 m&l white marble stone slab flooring 18 20 mm thick set over and including 15mm thick cement sceed base in cm 1:6 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishing complete as a boarder in the kota stone floorig all as specified and directed. 30 m&l machine cut cuddapa stone slab 20 25 mm thick, laid over 15mm thick cm ( 1:6 ) cement screed base, laid and jointed with grey ement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. 31 m&l rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:6 , top surfaces finished even and smooth without using extra cement complete all as specified n n 32 m&l rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4, mixed with using liquid water proofing compound complete all as specified ) , top surfaces finished even and smooth without using extra cement complete all as specified and directed. nnote : wpc measured and paid separately n 33 rendering in cement mortar i:3 on fair face of cement concrete on ceiling 10mm thk finished surface even and smooth without using extra cement complete all as specified n 34 m&l applying three coat of white wash on newly plastered surfaces of walls including washing floors, cleaning glass, joinery, electrical fittings, wiring etc. , of drops and splashes complete all as specified . 35 m&l two coats distempering with cement base paint , white or tinted over a coat of cement base primer on new surfaces of walls including washing floors, cleaning glass, joinery, electrical fittings, wiring etc. , of drops and splashes complete all as specified . n n 36 m&l preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery, electrical fittings, wiring etc. , of drops and splashes complete all as specified . n n 37 m&l for cement concrete 1:2:4 type b 1 ( using 20mm graded stone aggregate ) as in bed block for hold fast & filling in pressed steel door frame complete all as specified . 38 m&l for prepration of new steel surface not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified . 39 m&l for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. 40 s&f steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovatailed or welded as per is.1038:1983 ( amendment no.3 of may 2009 ) complete all as specified . 41 s&f steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovatailed or welded as per is.1038:1983 ( amendment no.3 of may 2009 ) complete all as specified . 42 m&l mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and / or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to fe 290 gde e 165 complete all as specified. n 43 s&f steel ventilator with top hung shutter incl. box type hinges with steel handle and steel peg stays complete with glazing bars welded as per is.1038:1983 ( amendment no.3 of may 2009 ) complete all as specified. 44 s&f 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified. 45 m&l galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average with of aperture 1.4mm and fixed withtinnwdtack, or galvanised wire staples complete all as specified. 46 s & f framed work as in door or gates of angle or other section with gusset plates rails, braces etc. complete, drilled for fixing of steel sheeting or other covering.door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering ) and hanging, also fastening and fixing complete all as specified. 47 m&l glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. ( without sash bars ) , edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in ssr part i, section 8, clause 8.20 ( a ) ; for doors supplied and fitted to chowkats complete all as specified and directed. 48 s&f plain framed, panelled shutter ( two panel ) factory made 35 mm thick of 2nd class hw rail and stylewith lock rail and panel of 9mm b.w.p. commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per is: 1003 ( part i ) , kiln seasoned and chemically pressure treated, . complete all as specified and directed. 49 s&f aluminium anodised barrel tower bolt 150mm long complete all as specified and directed. 50 s&f aluminium alloy, anodised handle cast type of size 125mm complete all as specified and directed. 51 s&f aluminium alloy, anodised sliding door bolt of size 250mm with hasp and staple and fixing clips of sheet complete all as specified and directed. 52 m / l butt hinges medium weight, cold rolled mild steel, and fixed 100mm long complete all as specified and directed. 53 m&l cement concret ( 1:3:6 ) typec 2 using 40mm graded stone aggregate as in surface channel and drain complete all as specified and directed. 54 m&l extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, mitred / stopped ends etc. complete all as specified and directed. 55 s&f 15mm dia. unplasticised pvc pipes of pressure rating 10 kg / cm2 fixed complete to walls, ceillings or in floors etc. complete all as specified and directed. 56 s&f 20mm dia. unplasticised pvc pipes of pressure rating 10 kg / cm2 fixed complete to walls, ceillings or in floors etc. complete all as specified and directed. 57 s&f gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe and fixed complete all as specified. n 58 s&f gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified. n 59 s&f stop valves, fancy type, cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified n 60 s&f chromium plated bib taps, cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified . n n 61 s&f ball brass valves, high pressure, with polyethylene float and flynut complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified. n n 62 s&f rotational moulded poly ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity , hoisted and fixed in position complete all as specified. n n 63 m&l pvc ( swr ) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or fixed to wall complete all as specified. 64 m&l pvc ( swr ) bend any radius 110mm dia complete all as specified. 65 m&l pvc ( swr ) tee any radius 110mm dia complete all as specified. 66 supply, installation, testing and commisioning of fully automatic, electric driven and integral electric heated, industrial washer cum extractor capacity 15 kg per cycle suitable for running on 3 phase 415 volts 50 hz, including all necessary accessories and components, mounted on self supporting rust proof frame with not less than 2 mm thick stainless steel body and all components of rust proof materials duly compatible for climatic conditions at ranchi including controlled through programmable logic control ( plc ) auto time auto reverse, auto stop, auto temp contro, l auto level control, pneumaticlly operated valves for auto water inlet, auto steam inlet, auto drain. the machine shall be soft mounted and operatable to apply a minimum g force with following features complete all as specified ans as followings: nmake : electrolux / stefab / fagor / unimac / fabcare / super shine / nagarjun as approved by the ge. n n n n 67 washer cylinder for washing, cleaning and extraction capacity 15 kg / cycle, complete electric driven and heated, front loading, heavy duty, heavy duty hot dip galvanized section frame, heavy duty rear gable and bearing support. both the inner and outer wash cylinders shall be constructed entirely using 2.0 mm thick stainless steel grade 304. 66.1 68 control : the machine shall be controlled with a fully programmable micro computer and should be able to capture features of a customised process. it shall have an lcd touch interface with customised and user operatable general wash settings. it shall be user friendly for editing / erasing preset programmes. n 66.2 69 detergent supply : the machines shall be available for use with powder or liquid detergents automatically fed via integrated detergent dispensers with minimum 5 compartments without user intervention. n 66.3 70 safety features: all machines shall be equipped with necessary safety interlock and warnings on the loading door. 66.4 71 auto weighing : automatic linen weighing system for automatic adjustment of water and soap consumptions as well as energy savings, according to the load inserted, measured automatically by the washer ) . 66.5 72 drive system : the machine shall have a motor powered by a vvvfdrive / vfd .there shall be no gearboxes, clutches or drive reducers. n 66.6 73 door opening: front loading not less than 500 mm ø 66.7 74 suppy, install test and commisoning of fully automatic industrial tumble dryer 15 kg linen capacity electric driven and electric heated, with integrated heating assembly, suitable for running on 3 phase 415 volts 50 hz, incl all necessary accessories and components, mounted on self supporting rust proof frame with complete stainless steel body n.less than 2.0 mm thick and all components of rust proof materials duly compatible for climatic conditions at ranchi with following features nmake : electrolux / stefab / fagor / unimac. fabcare / super shine / nagarjun as approved by the ge. n n 75 drying tumbler: capacity – 15 kg integral electric heated, electric vented, heavy duty, front loading, cool down feature, auto timed, auto / manually reversible dual motor drive, open pocket & front display. the dryer should be with temperature control system and the drum suspension should have sealed self lubricated bearings. 67.1 76 control : microcomputer with adjustable parameters such as temperature, programmes and cool down time. and also the feature to control the residual moisture control in the linen. temperature and time controller shall be auto digital control with software for minimization of the cost and maximization of the up time of the equipment. the process shall be through a fully programmabl with touch interface, which shallbe able to capture features of a customised process and the drying programme shall be user friendly for editing / erasing preset programmes. drum–inner and outer drum should be made of stainless steel, 2 mm thick. 67.2 77 safety features : the tumble dryer should be equipped with overheating protection and a temperature sensor that turns off the heat if the airflow is clogged. n 67.3 78 door lock : the dryer should have a safety function or feature , which means the dryer should stops in case the door is opened during operation. transmission: the transmission should have pulley and belt or direct drive. there should be no gearboxes , clutches or gear reducers and the motor shall have vvvf / vf drive. n 67.4 79 door : made of die pressed stainless steel aisi not less than 2mm thick, toughened glass window , ss door latch / handle and interlock for safety. n 67.5 80 suction blower : heavy duty centrifugal suction blower and dynamically balanced. lint screen self cleaning lint screen, facility of cleaning should be through front 67.6 81 suppy, installation, testing and commisoning vaccum finising table utility shape for general purpose, with integral vacuum fan and steam electric iron and integral boiler, ac, 3 phase, 380 415v with rectangular vaccum ironing table having dimensions 130mm ( width ) x 80mm ( depth ) x920mm ( height ) complete all as specified and as directed. nmake : fabcare / stefab / super shine / nagarjun as approved by the ge. 82 supply installing , testing and commisioning stream cum electric press complete all as specified and as directed. nmake : electrolux / stefab / fagor / unimac. fabcare / super shine / nagarjun as approved by the ge. 83 supply installing , testing and commisioning electrical stream boiler operate at ac, 3 phase, 380 415v, 50 hz suitable for operating mechanical laundry consisting as per item no 66 to 69 complete all as specified and as directed. nmake : thermax or other equivalent make as approved by the ge. 84 m&l for cpvc pipe, isi marked of required size and of approved make as per requirement of plant with required fittings complete for water lines for connection from source to individual machines like washer extractor, drier, flat bed press, ironing table with standard size pipe lines / cables as per manufacturers recommendations for efficient functioning of the equipments complete as directed. n 85 supply and fix mcb db, tpn 8 way ip 43 protection , double door , concealed on wall complete all as specified and as directed. nmake : indo asian / legrand / l & t / standard / havells / hpl as approved 86 s&f distribution board spn 230 volt, 4 way, double door type, concealed on wall suitable for mcb dp incomer and sp outgoing complete all as specified and as directed. nmake indo asian / legrand / l &t / standard / hpl as approved. 87 supply and fix mcb of follwing rating with necessary lugs for incomming and outgong connections fixed on db / enclosure / panel boards complete all as specified and directed. nmake : indo asian / legrand / l & t / standard / havells / hpl as approved. 74 88 mcb sp 6 to 32 amp 89 mcb dp 6 to 32 amp. 90 mcb 4 pole 6 to 32 amp. 91 s & f sheet metal tp and neutral enclosure with one mcb tp 6 to 32 amp and metal clad plug and socket ( rating of mcb suitable as per machine / load capacity ) amp and concelaled on wall complete all as specified n make : indo asian / legrand / l & t / standard / havells / hpl as approved. 92 s & f sheet metal dp enclosure with one mcb dp 16 amp and metal clad plug and socket ( rating of mcb suitable as per machine / load capacity ) concelaled on wall complete all as specified n make : indo asian / legrand / l & t / standard / havells / hpl as approved 93 m&l for new sub main wiring with 4.0 run single core 4.0 sqmm pvc unsheathed copper multistranded conductor, frls , drawing into and including pvc conduit concealed medium grade of size not less than 20 mm dia with all fittings and fixtures like l bow, saddles etc of white / ivory colour pvc conduit including multi stranded copper earth conductor 4.0 sq mm , frls two run as earth continuty conductor complete all as specified and as directed. nnote : 4 run of cable and two run of earth conductor cable and conduit shall be measured as one length. 94 m / l for new sub main wiring with 2.0 run single core 4.0 sqmm pvc unsheathed copper multistranded conductor, frls , drawing into and including pvc conduit concealed medium grade of size not less than 20 mm dia with all fittings and fixtures like l bow, saddles etc of white / ivory colour pvc conduit including multi stranded copper earth conductor 4.0 sq mm , frls one run as earth continuty conductor complete all as specified nnote : 2 run of cable and one run of earth conductor cable and conduit shall be measured as one length. 95 supply and lay cable xlpe insulated screened pvc bedded, galvanized steel strip or wire armored, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core.complete all as specified n ( make : polycab / havells / plaza as approved 96 excavation in trenches not exceeding 1.5 mtr deep and not exceeding 1.5 mtr width as in hard dense soil soil complete all as specified and as directed 97 returning filling incl leveling watering and well ramming in layer not exceeding 25 cm thick complete all as specified and as directed 98 removal of surface soil to a distance n.exc 50 m and deposited where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed 99 m & l river sand for cushioning for cable protection in trenches 8 cm before laying cable and 15 cm deep after laying of cable complete all as specified and as directed n ( note: punned thickness shall be taken for measurement ) 100 m&l laying well burnt old size bricks, sub class b bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. 101 m&l for point wiring complete as specified with 1100 v grade with 1.5 sq mm single core pvc insulated unsheathed frls cable, copper conductor multistranded passing through including concealed pvc conduit not less than 20 mm dia with concealed modular metal box sutable for switches , sockets , etc and with gi / ms box, 2.0 mm thickness concealed with necessary top plate of suitable size as required at site with pvc insulated frls unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dully as specified for folowing all as specified and as directed . 85 102 one light point controlled by one switch 103 one exhaust fan point controlled by one switch 104 5 amp switch socket on the same board. 105 5 amp switch socket on independent board. 106 all as per item no 85 above but size of cable 2.5 sq mm for 15 amps switch socket with earth wire of 2.5 sq mm and ditto 107 s&f switch 5 amps piano type 230 volts one way complete all as specified and as directed 108 s&f switch socket combination 5 amps flush type 230 volts one way acomplete all as specified and as directed n 109 s&f switch socket combination 5 / 15 amps flush type 230 volts one way complete all as specified and as directed 110 s&f ceiling rose surface backlite 65 x 50 mm two to three terminal suitable for 230 volts ac supply complete all as specified and as directed 111 s&f exhaust fan fan 230 volt 50 hz single phase ac supply , 300 mm sweep with louver complete with metal body powder coated with protective steel bird gaurd on wall including provision of 3 core 1.0 sq mm flexible cable from ceiling rose to exhaust fan including writing mes number on exhaust fan motor complete all as specified and as directed nmake: havells / almonard / bajaj. 112 supply & fix led tube light along with base frame , 18 w fixed on wall / ceiling complete all as specified and as directed by engineer in charge . nmake: havells / wipro / bajaj / philips / hpl / luker . 113 m & l earthing complete with galvanized steel earth plate electrode 600x600x6.0mm thick buried directly in ground ( earth pit not less than 2.25 meters deep below ground level ) with top edge of the plate not less that 1.5 meters below normal ground level connected to galvanized iron strip 25 x 4 mm as earthing by means of bolts nuts and washers of galvanized iron including excavation and earth work and disposal of surplus soil including 40 mm gi tubing light grade and necessary fittings for protection of gi strip including layong of charcoal , dust and common slat , pcc 1:2: 4 type b 1 using 320 mm graded aggregate with earth pit with 40 x 40 x 6.0 mm ms angle iron frame rcc cover 40 mm thick ( 1:2: 4 ) type c1 using 20 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75 mm c / c both way with ms handle 20 mm dia plastering 15 mm thick cm ( 1: 6 ) internally and up to 150 mm below ground level externally . pgi funel with wire mesh 20 mm dia gi pipe for watering complete all as shown on electrical plate no : 03 of ssr part i 2009 and connected to earth test point including testing complete all as specified and as directed...

Information And Public Relation Department - Jharkhand

21996300 tender for km. post , flank repair and construction of cantilever over head full gantry of purulia (west bengal borader) barmasia chandankiyari digwadih dhanbad (bank more) of nh 218 for the year 2019 20...

Government Polytechnic - Jharkhand

21992863 supply of furniture machine and equipments 1.01 steel cot apo size2056 mm w x 915 mm d x 650 mm h . bed stead height 400 mm overall width 1956 mm. bed frame : bed frame assembly is a welded of side frame. inner slat. the side 1.02 brand flipkart perfect homes model number st2ho05ms3p finish type semi gloss 1.03 tubular frame made of dia 2.54 x0.16 cm thick ms erw tube. the frame is powder coated dft 40 60 microns . the frame is provided with injection moulded shoes. seat& back assembly are 1.04 integreated with stainless steel stool to accommodate 4 person top the top is in stainless steel brushed finish with plb insert for durability. easy to maintain hygiene. under structure made of 1.05 all panels are made from 18mm thk pre laminated twin board e1 / p2 grade with pvc edge bending on all sides. the panels have corners rounded for safety usage. modesty panel height is 300mm. 1.06 with 4 shelves measuring plain ( 4s ) 916 mm ( w ) x 486 mm ( d ) 1981 mm ( h ) .welded construction.0.8 mm thk crca for back, shelf & 0.9 mm thk. crca for all other components. full height 1.07 two shitter 1.08 big size ( 25’x5’ ) 1.09 standard size 1.1 standard size 1.11 85 cm x 90 cm x 108 cm 1.12 60 cm x 80 cm x 2 cm 1.13 30 cm x 30 cm x 60 cm 1.14 standard size 1.15 office type 1.16 3’x2’x2.5’ 1.17 revolving type with arm telescopic height adjustment 5 legs with roller wheels. 1.18 6’x4’x2.5’ 2 machine / equipment ( mechanical ) lab name theory of machine ( tom ) 2.01 size 38*26 cm sq. height 24cm 2.02 size 26*26 cm sq. height 5cm 2.03 base 21*21 cm sq. height 43 cm 1.triangular cam 1 2.circular cam 1 3.conical cam 1 with followers 2.04 base 25*20 cm sq. height 21 cm large spur gear 75 teeths small spur gear 30 teeths 2.05 base 25*25 cm sq. height 13 cm large gear 20 teeths small gear 11 teeths 2.06 base 40*26 cm sq. length of cam shaft 38cm diameter of flywheel 14 cm 2.07 base – 30*28 cm sq. length 24 cm breadth 22 cm 2.08 base – 32*27 cm sq. length 26 cm breadth 35 cm 2.09 base – 28*30 cm sq. length 26 cm breadth 21 cm 2.1 1.5 hp motor 2.11 1.5 hp motor 2.12 standard 2.13 standard 2.14 standard 2.15 standard 2.16 standard 2.17 lab name power engineering ( tom ) suction pressure gauge ( 1 ) ( 0 17.5 kg / cm ) delivery pressure ( 1 ) ( 0 35 kg / sq cm ) compressor ( 1 ) 230v, 50 hz, rla 0.8 condenser ( 1 ) , capillary tube ( 1 ) , evaporator ( 1 ) 2.18 cooling system water cooled power 10hp speed 1500rpm rope brake dynamometer 01 spring balance 2 dia of brake drum 0.266 m 2.19 pressure gauge ( 0 7 ) kg / sq cm, power 2 hp displacement 196 litre / min cylinder bore 64 mm stoke length 75 mm tank 50 litre pressure 115 psi speed 2850 rpm weight 36 kg 2.2 pressure gauge ( 0 7 ) kg / sq cm, power 2 hp displacement 196 litre / min cylinder bore 64 mm stoke length 75 mm tank 50 litre pressure 115 psi speed 2850 rpm weight 54 kg 2.21 standard 2.22 standard 2.23 standard 2.24 standard 2.25 standard 2.26 standard 2.27 standard 2.28 lab name measurement & control lab panel – 7 / 2 inch led input – copative sensor fuse – 0.5milli appears accessories – capactive sensor 2.29 range – 0 to 20mm resolution – 0.1mm display – 7 / 2 inch led input lvdt fuse – 0.5milliampears accessories – micrometer with lvdt sensor 2.3 range – 2kg resolution – 0.01gram excitation – 5v dc power source – 230v = 1 10% frequency – 50hz display – 7 / 2 inch input – load cell ( accessories ) fuse – 0.5milli appears 2.31 panel – 7 / 2 inch input – light sensor fuse – 0.5 milliamppears 2.32 weight – 1000gm strain – 1 mu sec resolution – 5vdc power – 230v + 10% display – 7 / 2 inch fuse – 0.5milliampears full bridge amplifier accessories – strain cantilever beam 2.33 panel – 7 / 2 inch input – speed / rpm sensor fuse – 0.5 milliampears accessories speed / rpm sensor 2.34 thermocouple – 100 resolution – 0.1 panel – 7 / 2 inch fuse – 0.5 milliampears accessories – thermistor sensor 2.35 thermocouple – 100 resolution – 0.1 panel – 7 / 2 inch fuse – 0.5 milliampears accessories – thermocouple sensor 2.36 thermocouple – 100 resolution – 0.1 panel – 7 / 2 inch fuse – 0.5 milliampears accessories – thermal read off unit, thermocouple sensor 2.37 panel – 7 / 2 inch led input – capacitive sensor fuse – 0.5 milliampears accessories capacitive sensor 2.38 length 12 inch 2.39 range 0 10mm resolution 0.01mm 2.4 0 25mm, l.c 0.01mm 2.41 range 0 150mm resolution 0.001mm accuracy 0.002 2.42 range 0 150mm l.c 0.02mm range 0 6inch 2.43 size 125mm 2.44 blades 26 resolution 25 / 1000 inches 2.45 size 1 7mm 2.46 blades 40 2.47 size 12*12mm 2.48 lab name engg. mechanics lab to verify law of polygon of forces 2.49 to verify law of moments 2.50 to verify lami’s theorem 2.51 to determine the forces in members of a jib crane. 2.52 comparison of coefficient of friction of various pair of surfaces and determination of angle of repose 2.53 to verify force transmitted by members of truss 2.54 experimental location of centre of gravity of plane plate of uniform thickness. 2.55 find ma, vr, efficiency, ideal effort, effort lost in friction for various loads and establish law of machine and calculate maximum efficiency of differential axle and wheel. 2.56 find ma, vr, efficiency, ideal effort, effort lost in friction for various loads and establish law of machine and calculate maximum efficiency of simple screw jack. 2.57 study of single purchase winch crab and double purchase winch crab 2.58 study reversibility of the simple screw jack. 3 machine / equipment ( mechanical engg. + civil engg. ) 3.01 flraabm nea=m 1e5 0 s*7t5recnmg2th of material ( som ) wire size= 0.4mφ 3.02 dia of axle = 16mm dia of wheel= 190mm width of wheel=45mm 3.03 capacity= 3000kgm manufacture a.s.i.salepvt ltd 3.04 modal no atm 3 motor capacity 0.37kw 12mm φ*100mm capacity= 50kgm manufacture a.s.isalepvt ltd 3.05 model no ai ras sr.no 251 2010 / 11 manufacture a.s.i.salepvt ltd modal no sgirhtm 150 sr no 115 2012 / 13 capacity 187.5kgf manufacture a.s.i.salepvt ltd 3.06 0 – 150 mm 3.07 pendulum type scale striking hammer breaking system charpy test – 300 joule izodetes 164 joule 3.08 model ftt 200nm torque range 200, 150, 50 nm torque capacity maximum 200nm 3.09 atomatic 3.1 standard specification 3.11 lab name fluid mechanics lab ( f.m. ) / fluid hydraulics lab 3.12 area of tank 2500 sq.cm, angle of hill 10, weight 2.2 kg, height 21 cm 3.13 measuring tank 900 sqcm, piezometer tube 9, motor 0.37 kw / 0.5 hp ( self priming ) 3.14 measuring tank 900 sqcm, u tube differential manometer containing murcury, , motor 0.37 kw / 0.5 hp ( self priming ) 3.15 measuring tank 900 sqcm, u tube differential manometer containing murcury, , motor 0.37 kw / 0.5 hp ( self priming ) 3.16 measuring tank 900 sq cm, orifice 08 mm dia, slidings cale with vernier scale, motor 0.37 kw / 0.5 hp ( self priming ) 3.17 measuring tank 900 sqcm, notch angle 60, width of rectangular notch 9 cm, sliding scale with vernier scale, motor 0.37 kw / 0.5 hp ( self priming ) 3.18 measurement tank 900 sqcm, efficiency of motor 80%, digital wattmeter, dc motor 5 hp, pressure gauge ( 0 100 ) kg / cm 3.19 measurement tank 900 sqcm, efficiency of motor 80%, digital wattmeter, dc motor 5 hp, pressure gauge ( 20 45 ) kg / cm 3.2 measuring tank 700 sqcm, u tube differential manometer containing murcury, venturimeter ( inlet dia 2.8 cm and throat dia 2 cm ) , motor 0.37 kw / 0.5 hp ( self priming ) 3.21 table size 26x26 cm, height 24 cm 3.22 table size 25x25 cm, height 24 cm 3.23 table size 25x25 cm, height 24 cm 3.24 table size 25x25 cm, height 10 cm, diameter – 16 cm 3.25 table size 25x25 cm, height 35 cm 3.26 in wall mounted range in mm 50 0 50 to 1000 0 1000 mm wc / hg 3.27 standard test apparatus 3.28 1.a sump tank 550 x 430 x 225 2. flow pipe length 700mm 3. measuring flask 1 litre 4. pump submersible type 5. piping with necessary valves and fittings. 6. detailed technical manual and on site demo 8. control panel on / off switch, mains indicator etc 3.29 design speed 750 900 rpm, output power 3.7kw ( 5.0hp ) , design head and discharge 46 50 m and 700 900lpm, cast iron body with a large transparent acrylic window a nozzle and spear arrangement, hydraulic casing window a nozzle and spear arrangement, hydraulic casing braking jet arrangement, a bearing pedestal, a rotor assembly of shaft, runner and brake drum all mounted on a sturdy base buckets gunmetal, spear made of stainless steel for corrosion resistance, centrifugal monoblock pump set of 15hp capacity of size, opera table on 440 volts, 3phase, 50hz line complete test rig is mounted on a storage tank of suitable capacity 3.3 design speed 1500 rpm, output power 37kw ( 5.0hp ) , design head and discharge 15 20 m and 1800 200lpm, cast iron spiral casing, a rotor assembly of shaft, gunmetal runner and brake drum all mounted on a sturdy base, aerofoil shaped gunmetal guide vanes, conical draft tube, stainless steel for corrosion resistance, centrifugal monoblock pump set of 15 hp capacity of size flow measuring unit venturimeter of size 100mm, operatable on 440 volts, 3phase, 50hz line. complete test rig is mounted on a storage tank of suitable capacity. 4 machine / equipment ( civill engg. ) lab name. geo technical engineering lab 4.01 a brass bowl ( cup ) , an adjustable bracket. a rubber of a standard hardness by cam action. 4.02 casagrande grooving tool and one astm grooving tool and height gauge. complete set. 4.03 standard compaction test compaction mold brass 100 mm internal dia. x 127.3 mm height x 1000 cc volume. complete with collar & base plate with rammer 2.6 kg x 310 mm controlled fall. 4.04 heavy compaction test compaction mold brass, 150 mm internal dia. x 127.3 mm height, volume 2250 cc. complete with collar and base plate. rammer 4.89 kg. x 450 mm controlled fall as for 4.05 standard is: set of sieves ranging from 125 mm to 750 micron 4.06 gyratory type ¼ h.p. motor compatible with 1.25 hp motor 230 volts, 50 cycle phase, ac supply 4.07 double walled oven with the inside made of thick anodized aluminum or stainless steel. outside mild steel finished in white enamel. the gap between the inside and outside is 75 mm and is filled with pure glass wool. adjustable air 4.08 1 kg glass jar with brass cone, locking ring and rubber seal. spare: rubber seal. 4.09 ( cbr ) motorized 9 ( nine ) load frame 1.25 mm / min 0.025 mm 1. motorised load frame having single rate of strain of 1.25 4.1 shear box assembly, 60 mm square, complete with a. u. bracket, guide pins and spacing screws, made of brass gipper assembly consisting of two plain grid plates, two perforated grid plates, one 4.11 capacity: 500 kg proving ring type ( manually ) screw operated load frame cap 5000kg. with a gear box and motor drive giving 1.25, 1.5, 2.5 4.12 triaxial shear test apparatus 4.13 sand replacement method apparatus 4.14 permeability by constant head test equipment 4.15 core cutter 4.16 lab name. environmental lab chamber volume 250 litre 4.17 material –glass size 150 ml neck finish – 18 mm compact size 2’w x4” h x 6”d fits virtually anywhere 4.18 mixes up to 2 litres of water at a maximum speed of 2500 rpm power adapter with 115 vac operation 4.19 temperature of reaction 105 0c temperature stability ± 0.50c temperature range = 100c to 1600c 4.2 lab name. survey practice lab angle measurement 4.21 a table top, similar to drawing board fitted on to a tripod is the main instrument shape square 4.22 roller type accessories supplied ac adapter and plastic case accuracy within + / 0.2 % 4.23 accuracy 2mm magnification – 30 x raster diameter 79 mm 4.24 packaging type box material aluminium telescope extended 32 cms 4.25 plum bob material mild steel pack type box 4.26 plum bob material mild steel pack type box 4.27 specific gravity 2.6~2.8g / cm3 bend strength greater than300kg hardness greater than 9 mohs 4.28 made of steel square conduit pipe, duly enameled painted red & white. fitted with strong solid iron shoe at the bottom. ( a ) size 2 mtr. 4.29 brass handle & brass tally, as per is swg 8 gi wire 4.3 length – 30 m / rewinding 4.31 image – erect magnification – 32 x , minimum effective objective aperture 36 mm, field of view 1020’ minimum focusing distance 0.5m, multiplication constant 100, additive constant 0 compensator range + 15’, compensator setting accuracy + 0.5’ or better 4.32 standard size 4.33 standard size 4.34 standard size 4.35 standard size 4.36 standard size 4.37 a ) .prismatic compass 4.38 b ) . surveyor compass 4.39 sprit level 4.4 lab name: transportation lab sieves of sizes 80, 40, 20, 10, 4.75mm 4.41 sieve shaker ( motorised ) 4.42 loading unit motorized. a capacity of 5000 kgf with two telescopic pillar 2 compaction rammers 4.5 kg, wt. free fall 45.7 cm 4.43 ductility testing machine for elongation rate 50 mm / min. 4.44 ring and ball apparatus according to ip 58 and is 1205. hand operated, apparatus consists of glass beaker of heat resistant glass having internal diameter of 8.5 cm x 12 cm. depth 4.45 as per is 1203. bitumen penetrometer manually operated including adjustable weight arrangement standard accessories. 4.46 consists of a hollow steal cylinder, closed at both and inside dia of 700 mm and inside length of 500 mm. drum rotation 30 33 kpm. set of 12 no. cast iron sphere, 48 mm dia wt= 390 445 gran. 4.47 type – spare oil cup therometer according to ip33, ip 170 also is 1448 4.48 lab name: building material lab compression 650 mm testing 800 mm space 50 mm specification will be provided later on 4.49 4.50 slump test apparatus 5 machine / equipment ( metallurgical engg. ) 5.01 rolls: diameter: 2.000” width: 4.000” 6.000” wide. rolls are precision ground with a tir of less than. 0001. the mill will be equipped with entry and exit tables. 5.02 rated capacity : 100g, least count : 0.001g, accuracy: ±0.001g, minimum weight : 0.001g 5.03 weight 7.2 lb / 3.3 kg leg span 0–12 in / 0–30 cm cord length 12 ft / 3.7 m 5.04 width: 410mm depth: 250mm height: 225mm 5.05 with sliding weight, lifting and ramming cam, specimen tube, pedestal cup and stripper. 5.06 consists of stirrer, glass jar, siphon, timer unit, 53 micron sieve pan, wash bottle. 5.07 height 10 1 / 2 inches. width 7 inches. cylinder bore 1 inch diameter. 5.08 distance from tip of nozzle to the bottom of test piece 12.5 + 0.5 mm. height of the free water jet 65 + 10 mm ( without test piece in 5.09 body material stainless steel power 1 kw voltage 220 240 v 6 machine / equipment ( electrical engg. ) lab name. electrical lab 6.01 mains supply : three phase 415 volt + / 10%, 50 hz load : r l analog meters used wattmeter: 500w ( 2 nos ) voltmeter : 500 v ammeter : 1a 6.02 parameter – lq, c d, r q and z q frequency : 00h, 120 hz and 1 khz accuracy : 0.3% 6.03 inbuilt variable ac supply 0 to 230 volt inbuilt variable dc supply: 0 to 6 six volt ( with load ) meter used acvolt meter o to 300 volt dc volt meter o to 10 volt ac ammeter 0 to 1 amp dc ammeter o to 1amp ac watt meter o to 500 watt main supply; 230v + / 10% 50 hz 6.04 bridge: kelvin waveform provided : sine potentiometer 1k & 10kῳ, helical 10 turn pot mounted with dial for 6.05 operating modes: sine, squire, triangle& dc outputs frequency range: 0.1 hz 1mhz in 7 decade steps frequency accuracy: + / 0.5% 6.06 range 1 ohms to 10 mohm, 5 watts 6.07 range 10 pf to 150 uf 6.08 range – up to 1000 mohm 6.09 range – 3 ½ digit dc ac volts & currents resistance / diode / continuity testing 6.1 230 v, 10a 6.11 400v, 10a 6.12 6.13 6.14 6.15 contacting and non contacting both 6.16 6.17 6.18 6.19 lab name. electrical machine lab 1 hp dc shunt, 1 hp dc compound, 3 hp 3 ph ac synchronous, 1 hp 3 ph squirrel cage induction motor, 1hp 3 –ph slip ring induction motor, 1hp dc series motor 6.2 dc machine trainer kit to perform following experiments: 6.21 dc machine trainer kit to perform following experiments:study of operating characteristics of dc series motorstudy of speed control of dc series motor using field current control study of speed control of dc series motor using armature voltage control ( a ) mains supply; single phase, 230 v ac + / 10%, 50 hz single phase transformer rating ; 1 kva primary voltage : 0 125v, 0 125 v secondary voltage : 0 125v, 0 125v rated current : 5a 6.22 single phase auto transformer primary voltage; 230 v secondary voltage: 0 270 v rated current : 5a analog meters used voltmeter : 300v ( 2 nos ) voltmeter 50v ammeter: 1a wattmeter: 100w wattmeter: 1000w 6.23 power rating : 1kva primary voltage: 415 v secondary voltage ; 230 v rated current: 4a 6.24 single phse induction motor trainer kit to perform following experiments: study of single phase induction motorstudy off running and reversing of single phase induction motorstudy of the no load test in single phase induction motorstudy of the blocked rotor test in a single phase induction motor study of load test of a single phase induction motor ( a ) 6.25 potentiometric error detector: study of characteristics error detection dc position control angle to voltage converter ( a ) 6.26 eror detection lab name. analog and digital lectronics laboratory • solder less bread board • dc power supply +5v, ±12v • on board signal generator with adjustable amplitude 6.27 • on board led bank to observe digital outputs • 1 nos of zif socket • 8 bit discrete adc • 12 bit successive approximation monolithic adc ic digital • ramp type adc, 8 bit adc usin monolithic ic • 8 bit binary weighted resistor dac , 8 bit ladder type • resolution 152.6 uv 6.28 • bread board , 16 bit data switches and speaker , potentiometer four channel adapter • two digits seven 7 segment led on board • dc power supply of ±5, ±12 @500ma ( fixed ) • zif socket of 40 pin , 28 pin, and 20 pin 6.29 • on board circuits : low pass, high pass, band pass, notch filter , matched filter etc • white noise source 6.3 • two nos of op amp ua 741ic : its various application like inverting , non inverting, voltage follower, summer , adder, substractor, differentiator, integrator, comparator, schmitt trgger 6.31 • flip flop : rs, jk, d, t type flip flop and master & slave flip flop • +5v smps adaptor provided with the trainer for power supply • input: +5v dc 6.32 • encoder and decoder ( atleast 4 types0 • leds for visual indication of inputs and output status • led indication 6.33 • +5v smps adaptor provided with the trainer for power supply • easy illustration of multiplexer / de multiplexer • ics for multiplexers & demultiplexers 6.34 • standalonene system with easy illustration of different types of counters ( up / down, decade, ring, cascaded, johnson, modulus counter ) . 6.35 • standalone system with easy illustration of all types of 3 – bit and 4 – bit shift register • spdt switches for logic selection 6.36 • solder less bread board • bread board with one bus , two bus, and higher availability • grid contact specing between them will be 1 / 10 6.37 • stranded 28a wg jump wires with solid tips • stripped 3 / 16 to 5 / 16 in ( 4.8 to 7.9mm ) , shorter wires 6.38 • inbuilt power supply • compensation system components design for user defined • external components also provided • matlab 9.6 r20149a 2019 6.39 • it will be suitable for control system lab experiment like • study the effect of p, pi, pid controllers using matlab 7 machine & equipment ( computer science & engineering ) computer lab 7.01 i7, 8gb ram, 1 tb hard disc, 18.5” monitor 7.02 1kva input single phase sine wave, 160v 280v output single phase sine wave, 230 v ac, 7.03 software turbo c++ 7.04 ms office 2016 for windows o / s 7.05 java jdk 1.7 7.06 quick heal total security 16 or higher ) 7.07 java beans for windows o / s...

Bharat Coking Coal Limited - Jharkhand

20727012 tender for fixing of pole with cantilever for installation and fixing of cctv camera, barricading the platform of new raw coal receipt weigh bridge at moonidih coal washery=> open tender...

Ministry Of Mines - Jharkhand

19957242 tender for supply and installation of networking equipments and lan cabling for development of it infrastructure at zonal office of mecl, eastern zone, ranchi=> open tender: 1 switches and passive networking components ( make: cisco ) item a 1.01 catalyst 2960 x 24 gige, 4 x 1g sfp, lan base 1.02 power retainer clip for 3560 c, 2960 c and 2960 l switches 1.03 10a power cable for india 1.04 sntc 8x5xnbd catalyst 2960 x 24 gige, 4 x 1g sfp, lan ( 36 months warranty ) 3 years 2 passive cabling components make: dlink or digisol itemb 2.1 utp cabling components for active node itemi 2.11 cat 6 outdoor armoured cable box ( 305mtr ) 2.12 4 pair, cat 6 utp cable, roll of 305m 2.13 24 port unloaded modular jack panel 2.14 cat 6 utp rj 45 jack for unloaded jack panel shutter type 2.15 cat 6 utp rj 45 jack with faceplat and smb box 2.16 cat 6 patch cords 4 feet ( blue ) 2.17 cat 6 patch cords 7 feet ( blue ) 2.2 other itemii 2.21 1 hdpe pipe 20mm 2.22 1 pvc conduit pipe & flexible pipe 2.23 1 pvc casing and capping 2.24 screw, gujje, pvc bend, extension box, saddle, flexible pipe, pvc and gi type 3 network rack rack components itemc 3.11 network rack 19” 15u wall mount communication rack with 1 no fans, 1 nos. 6 socket power strip, mounting hardware, glass door with lock & key, 1 no of 19 cable manager, cantilever tray. 4 labor itemd 4.11 fixing and installation configuration of switches 4.12 laying of outdoor armoured cable ( 305 mtr box ) 4.13 laying of cat 6 utp cable ( 305mtr box ) ...

District Collector - Jharkhand

16596871 tender for pipefitter and ducting tools2 brazing torch set; gas type: lpg/methane; fire through 90deg; gas mixing: injector lazy tong type rivet gun; rivet dia 1/8 to 1/4 inch; make stanley or equivalent; rivets for rivet gun 10mm spring outside calliper 10mm spring inside clipper flaring tools set; make imperial or equivalent digital clamp meter; make meco/fluke/mastech digital thermometer celsius/fahrenheit; water pressure gauge; 0 160psi; grinding disc 100mm make bosch/makita/dewalt pipe threading machine 2 digital angle finder; make bosch/stanley/stabila welding blanket; size 6 ft x 8 ft rubber gloves; honeywell/3m/dupont dust mask; make honeywell/3m/dupont leather tool belt : having more than 10 pockets : min size :18.5*7inch 5 tray cantilever toolbox (min dim : 450mmx 200mmx 205mm). thermocol packing...

Government Of Jharkhand - Jharkhand

15214942 general terms & conditions: 1 10 inch cable cutter for cutting aluminium & copper cables make stanley/dewalt/force 2 10 pull cord switch metal drill bit set; material steel; make bosch/dewalt/makita 3 10 tin cutter with spring; make stanley/dewalt/ force 4 10″ water pump pliers make dewalt/force/stanley/tata agrico 5 10mm spring inside clipper 6 10mm spring outside clipper 7 12 pull cord switch combination spanner set; sizes(in mm) 6,7,8,9,10,11,12,13,14,17,19 & 22; make stanley/dewalt/force 8 12 pull cord switch open end spanner set; sizes(in mm) 6,7,8,9,10,11,12,13,14,17,19 & 22; make stanley/dewalt/force 9 12 pull cord switch ring spanner set; sizes(in mm) 6,7,8,9,10,11,12,13,14,17,19 & 22; make stanley/dewalt /force 10 12 pull cord switch tubular box spanner set with tommy bar; sizes 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 23x27, 25x28, 30x32 mm; make stanley/dewalt or /force 11 18 g gi sheet (6 x 4) 12 18 ounce electrician’s straight claw hammer: make stanley/dewalt/force 13 2 in 1 reversible screw driver star and flat; size 12 x 140mm; make dewalt/stanley/force 14 2 in 1 reversible screw driver star and flat; size 6 x 140mm; make dewalt/stanley/force15 2 in 1 reversible screw driver star and flat; size 6 x 250mm; make dewalt/stanley/force 16 2 in 1 reversible screw driver star and flat; size 8 x 140mm; make dewalt/stanley/force 17 200l drum; colour blue; make hdpe virgin plastic; min opening dia 260mm 18 200mm spring divider; make force or equivalent 19 3 scratch awl heat treated alloy steel blades, blade length 3inch, min overall length 6 inch, wooden handle. make stanley/cresco/force 20 4 ci snap cutter; make ridgid, milwaukee or force 21 5 tray cantilever toolbox (min dim : 450mmx 200mmx 205mm). thermocol packing 22 8″ diagonal cutting pliers: make klein tools/stanley/irwin visegrip/dewalt...

South Eastern Railways - Jharkhand

13836048 tender for ( i ) replacement of copper cross feeder wire 150 sq.mm in place of aluminum feeder wire over ranchi division. ( ii ) improvement of critical implantation and replacement of cantilever assembly over ranchi division. ( iii ) modification of ohe ( over head equipment ) due to conversion of tram way ohe to conventional ohe at hte station ( phase ii ) ....

Road Construction Department - Jharkhand

7785240 construction of 02 no. 17.00m wide over head full gantry and 04 nos. over head cantilever sign board 5.5m x 2.1m (half gantry) in different road under road divn., garhwa....

Road Construction Department - Jharkhand

6241202 construction of over head two nos full gantry and four nos cantilever half gantry in different road under road construction department at sahibganj....

Road Construction Department - Jharkhand

6235275 construction of 2 nos 17 m wide over head gantry and 4 nos cantilever type sign board 5.5 m x 2.1 m size over head gantry in various roads under godda....

Road Construction Department - Jharkhand

6181513 construction of 02 no. 17.00m wide over head full gantry & 04 nos. over head cantilever sign board 5.5m x 2.1m (half gantry) in different road under road divn., garhwa....

Road Construction Department - Jharkhand

6181393 construction of 02 no. 17.00m wide over head full gantry and 04 nos. over head cantilever sign board 5.5m x 2.1m (half gantry) in different road under road divn., garhwa....