Central Coalfields Limited - Jharkhand

34164706 repairing work in dozer model no bd155 m/c sl no t3657/13610 of aad ocm, dhori area following repairing work in dozer model no bd155 m/c sl no t3657/13610 of aad ocm, dhori area i)repairing/changing of broken and damaged lift cylinder bushing and pin and its mounting bracket (lh and rh) ii) repairing of cracked brace arm 02 nos...

Bharat Coking Coal Limited - Jharkhand

34155642 replacement of damaged conveyor belt, installation and erection of counter weight, brackets, support guard etc. at ps 2 rom 201 belt conveyor section at madhuban coal washery under block ii area, bccl....

Bharat Coking Coal Limited - Jharkhand

34155633 repairing and strengthening of whole conveyor structure including its stringer channel, posts, bracings, deck plate and take up structure along with replacement of roller brackets and cgi sheet for unit 501a and 903 belt conveyor at moonidih washery...

East Central Railway - Jharkhand

34138387 auction sale of disposal of ferrous scrap released materials such as ( 1 ) tljb qty=2nos.=14kg ( 2 ) cls unit 2 aspect qty=6nos.=330kg ( 3 ) cls unit 3 aspect qty=4nos.=300kg ( 4 ) cls unit 4 aspect qty=3nos.=315kg ( 5 ) shunt signal unit qty=3nos.=60kg ( 6 ) shunt signal unit + base qty=3nos.=105kg ( 7 ) location box full size qty=53nos.=6890kg ( 8 ) location box half size qty=9nos.=855kg ( 9 ) relay rack qty=6nos.=660kg ( 10 ) ct rack qty=8nos.=520kg ( 11 ) route indicator with arm, qty=1no.=60kg, ( 12 ) off set bracket qty=6nos.=96kg, ( 13 ) point rod ( cut piece ) qty=68nos.=816kg ( 14 ) data logger qty=2nos.=190kg ( 15 ) ledger with platform qty=11nos.=385kg, location gmo store. [ i ] loading by the labour of purchaser, [ ii ] delivery on the basis of actual weight only....

Bharat Coking Coal Limited - Jharkhand

34113926 repairing of rhs rear leaf spring, front 1st axle steering knuckle and rhs bogie bracket of scania si. no.jh10an 5431 of auto workshop, repairing of rhs rear leaf spring, front 1st axle steering knuckle and rhs bogie bracket of scania si. no.jh10an 5431 of auto workshop, laikdih, cv area....

Eastern Coal Fields Ltd - Jharkhand

34113824 annual maintenance contract for day to day cleaning, upkeeping, maintenance and repairing of running conveyor belt and its associated accessories or part in chp maintenance daily checking repairing / replacement of rollers roller brackets deck plate stringer leg supporting with leg and other related jobs of reclaim section conveyor belt ( c16 c17 c18 and c19 ) ...

Eastern Coal Fields Ltd - Jharkhand

34113780 maintenance daily checking repairing / replacement of roll ers roller brackets deck plate stringer leg supporting with leg and other related jobs of reclaim section conveyor belt ( c16 c17 c18 and c19 ) ....

Bharat Coking Coal Limited - Jharkhand

34088858 repairing of silencer assly., its cover and fabrication of stand with brackets and door bit fitting and new safety glass 02 nos. fitting in drill dr 196 at akwmocp , katras area, bccl ....

South Eastern Railways - Jharkhand

34042702 supply of set of sand pipe bracket assemblyset of sand pipe bracket assembly, set of sand pipe bracket assembly of wag7 locos consisting of 1 ) sand pipe bracket to clws drg.no. 06 / 3 / 21 / 9b alt 4. 2 nos. 2 ) sand pipe bracket to clws drg.no. 06 / 3 / 21 / 8a alt 4. 2 nos. 3 ) sand pipe clip to clws drg. no. 06 / 4 / 21 / 7 alt 2 ( ref.i ) 8 nos 4 ) hex head screw m10x35mm is 1364 8nos 5 ) hex head nut m10 tois 1364 8 nos 6 ) spring washer m15 to is3063 16 nos 7 ) end piece to clws drg no 05 / 4 / 21 / 14 4 nos electric loco in stores / bksc , jharkhand 40.00 set...

Electric Works Division - Jharkhand

34036302 quotation inviting basic rate of material for energy department jharkhand. 1 servicing of cassette air conditioner machine 2 servicing of ductable air conditioners machine 3 replacemetn of air conditioner machine indoor motor etc as reqd. 4 pcb replacement of ductable air conditioner machine etc as reqd. 5 pcb replacement of split air conditioner machine etc as reqd. 6 replacement of air conditioner machine outdoor motor etc as reqd. 7 comprehensive annual maintenance 8.5 tr ductable type ac m / c iincluding fan motor, capacitor, relay, selector switch, thermo state swtihc, air filter, remote controller, fan blower, evaporator and condenser coil and compressor 8 s / f decorative pole of height 3 mtr as required, product code erospolet04030m ( make havells ) 9 s / f elente type single arm as required, product code elanteuni750 single arm bracket ( make havells ) 10 s / f 45 watt led post top for decorative pole, ip66, 3000k / 5700k, product code erospt45wled757pasytopc ( make havells ) 11 s / f foundation bolt, template and accessories as reqd. 12 s / f 70 watt tycoon led post top with die cast aluminium housing ip65 for glare free symmetrical light distribution item code tycoonpt70wled757psymtopc ( make havells ) 13 s / f 70 watt baron led post top with die cast aluminium houseing ip65 for glare free symmetical light distribution item code baronpt70wled757psymtopc ( make havells ) 14 s / f 16 watt mushroom led bollard ip54 with die cast aluminium housing luminarie for downward lighting as reqd. item code mushroombl16wled757psymtopc 15 s / f 50 watt victoria led post top with die cast aluminium housing ip66 for glare free symmetrical light distribution item code victoriapt50wled757psymtotg ( make havells ) 16 s / f 40 watt nebula led post top with die cast aluminium housing ip66 for glare free symmetrical light distribution. item code nebulapt40wled857psymtopc ( make havells ) 17 s / f 10 watt turin led bollard ip 66 with die cast aluminium housing luminaire for grden lighting as reqd. item code turinbls10wled857psymtopc 18 head gasket make perkins part no se2h 19 kit bearing make perkins part no. se91aa / 3m 20 joint make perkins part no 278 / 399 21 gasket make perkins part no. t402615 22 joint make perkins part no. 278 / 384 23 joint make perkins part no. 282 / 292 24 joint make perkins part no. 282 / 295 25 joint make perkins part no. 282 / 296 26 joint make perkins part no. 341 / 201 27 valve kit make perkins part no. t401928 28 spring make perkins part no. 365 / 472 29 thermostate make perkins part no. se573 / 1 30 elc coolant ( 20 ltrs pack ) make perkins part no. 21820263 31 gasket thermostat make perkins part no. se573c / 3 32 o ring make perkins part no. 277 / 124 33 lube oil filter make perkins part no. 4324909 34 fuel filter make perkins part no. 4759205 35 air filter make perkins part no. s551 / 4 36 fuel filter insert make perkins part no. lcl 01030 37 perkins deo 20 ltrs jar part no. t401313 38 lig gasket make perkins part no. lcl / 30556 39 elc make perkins part no. 21820263 40 insert make perkins part no. t400522 41 liner make perkins part no. se7e / 2 42 o ring make perkins part no. 576 / 167 43 o ring make perkins part no. 576 / 165 44 o ring make perkins part no. 576 / 151 45 retainer make perkins part no. se1b / 39 46 o ring make perkins part no. 576 / 218 47 kit, piston ring make perkings part no. 359 / 552 48 o ring make perkings part no. 576 / 205 49 o ring make perkings part no. 576 / 242 50 retainer make perkins part no. l7c / 15 51 coolet make perkings part no. hw7b / 18 52 conrod bolt make perkings part no. 363 / 48 53 o ring make perkings part no. t430724 54 valve guide make perkings part no. t401899 55 gasket kit make perkings part no. t400523 56 towards the charges for the removing of old valve, guide and insert, fitment of new materials, reming and pressure testing. part no. 998717 57 towards the charges for the removing of old valve, guide and insert, fitment of new materials, reming and pressure testing. part no. 998717 58 charges for injector callibration part no. 998717 59 s / f xlpe insulated aluminium power armoured 11 kv 3 core 240 sq mm cable as reqdw. ( make havells / polycb / or equi ) 60 240 sq mm aluminium lugs 11 kv grade 61 4 g.i pipe 62 servicing of split a.c...

Bharat Coking Coal Limited - Jharkhand

34032655 tender for supply of various items 1. moving contact 2. moving contact bar 3. under voltage release coil 4. moving bracket copper contact coplete set 5. priside no volt coil 6. t.c auxiliary contact 25a, 2no+2nc...

Central Coalfields Limited - Jharkhand

34022956 partial repairing of cracked dump body (lh side) and steering cylinder (lh and rh) and its mounting brackets of bh 60m dumper sl. no. 60426/d 12470 of giridih ocp...

Central Coalfields Limited - Jharkhand

34022653 repairing of rh rear suspension eye holes 2 nos. and mounting brackets 4 nos. and partial repairing of front drive line of bh 60m dumper sl. no. 60066/d 12180 of giridih project...

Central Coalfields Limited - Jharkhand

33999025 repairing of rh rear suspension eye holes 2 nos. and mounting brackets 4 nos. and partial repairing of front drive line of bh 60m dumper sl. no. 60066 / d 12180 of giridih project...

Central Coalfields Limited - Jharkhand

33999021 partial repairing of cracked dump body ( lh side ) and steering cylinder ( lh and rh ) and its mounting brackets of bh 60m dumper sl. no. 60426 / d 12470 of giridih ocp p...

Jharkhand State Electricity Board - Jharkhand

33997673 supply of different type of fabrication materials , electrical items : , clamp ( 50x6 ) mm for top channel forrail pole 2.40 kg ( galvanized ) , clamp ( 50x6 ) mm for abswitch base channel 1.75 kg ( galvanized ) , ms channel ( 100x50x6 ) mm for 11 kv ab switch 53.44 kg ( galvanized ) , 33 kv pole top bracket 2.90 kg ( galvanized ) , 33 kv backclamp for8mtr pole ( 50x6 ) mm 1.00 kgtop bracket ( galvanized ) , 33 kv vcrossarm ( 100x50x6 ) mm20.48 kg ( galvanized ) , m / s base plate for 33 kv ( 18.00 kg ) , back clamp ( 50x6 ) mm for 60 kg rail pole 1.95 kg ( galvanized ) , support clamp for vcross arm for 60 kg rail pole ( 1.79 ) kg ( galvanized ) , back clamp ( 50x6 ) mm jointing / packingpiece for 60 kg rail pole 0.80kg ( galvanized ) , 33 kv angle stay clamp 1.75 kg ( 50x6 ) mm ( galvanized ) , 33 kv clamp for line dp channel ( 4.20 kg ) ( galvanized ) , 33 kv d.p channel support clamp ( 50x6 ) mm 2.16 kg ( galvanized ) , 33 kv d.p channel ( 100x50x6 ) mm 52.00 kg ( galvanized ) , earth clamp for earth wire ( 50x6 ) mm 1.60kg ( galvanized ) , 11 kv pole top bracket 50x8 mm 2.10kg ( galvanized ) , 11 kv back clamp for top bracket 1.0 kg ( galvanized ) , 11 kv v cross arm ( 75x40x6 ) mm 10.93 kg ( galvanized ) , support clamp for 11 kv v cross arm 1.0 kg ( galvanized ) , 11 kv back clamp for line dp channel ( 40x6 ) mm 2.60 kg ( galvanized ) , 11 kv d.p channel support clamp ( 50x6 ) mm ( 1.80 kg ) ( galvanized ) , 11 kv d.p channel ( 75x40x6 ) mm 32.32 kg ( galvanized ) , anglestay clamp ( 50x6 ) mm for 8 mtr long 200 kg psc pole 1.65 kg ( galvanized ) , side stay clamp ( 50x6 ) mm for 8 mtr long 200 kg psc pole 1.65 kg ( galvanized ) , 11 kv angle stay clamp ( 50x10 ) mm 1.95 kg ( galvanized ) , 11 kv top channel ( 100x50x6 ) mm 53.44 kg ( galvanized ) , ms angle for lt distribution bus ( 35x35x6 ) mm 18.00 kg ( galvanized ) , clamp ( 50x6 ) mm for transformer base channel2.16 kg ( galvanized ) , clamp ( 50x6 ) mm for transformer belting 2.16 kg ( galvanized ) , clamp ( 50x6 ) mm for ltbusset0.90 kg ( galvanized ) , clamp ( 50x6 ) mm forhg fuseset 0.90 kg ( galvanized ) , m / s flat ( 75x40x6 ) mm ( galvanized ) ...

Water Resources Department - Jharkhand

33988361 supply of rate items cast iron stainless steel plate phosphorus bronze en 9 grade round bar single thrust ball bearing suitable for spindle dia. double thrust ball bearing suitable for spindle dia. musical note hollow type rubber ( teflon cladded ) solid musical note type rubber seal ( teflon claded ) musical note hollow type rubber ( plain ) solid musical note type rubber seal ( plain ) flat rubber seal wedge type rubber seal rubber seal jointing adhesive stainless steel counter shank nut, bolt & washer. diver coupling steel core wire rope ( construction 6x36 ) fiber core wire rope ( construction 6x36 ) worm gear box consisting of worm gear, worm shaft, upper & lower thrust heavy side roller gearing, spur gear. ( worm gear id to be made out of phosphorous bronze ) . industrial oxygen gas acetylene gas roller bearing chain pully hydra 14x coles crane ( 360 degree rotating ) brake shoe assembly with all accessories. wire rope u clamp cadmium compound grease rope socket rope thimble winch crab double reduction hoisting system including steel core wire rope of 18 mm diameter etc. rope drum hoisting system consisting of double rope drum with two stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. rope drum hoisting system consisting of single rope drum with single stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. gear box for hoisting system make radicon, greaves, premium or equivalent chain sprocket for s.r.u drive rachet lock system. bearing housing. gear oil for gear box. m.s channels square bar round bar m.s pipe ( hollow type ) ( a ) 75mm dia ( b ) 150mm dia ( c ) 200mm dia ( d ) 250mm dia hilti bolt ht nut, bolt & washer plummer block 126 accessories forgear operated sluice valve. rubber insertion gland packing gland flange spl. type gland flange bolt nut thrust ball bearing gear box operating wheel gate hanging bracket flange socket tail piece flange collar tail piece...

Department Of Atomic Energy - Jharkhand

33975299 bids are invited for construction of community centre atturamdih township 1 earth work in excavation by mechanical means hydraulic excavator or manual means over areas exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan including disposal of excavated earth lead upto 50m and lift upto 1.5m disposed earth to be levelled and neatly dressed complete as per direction of eic. 2 excavating trenches of required width for pipes cables etc including excavation for sockets depth upto 1.5 m including getting out the excavated materials returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed within a lead of 50m as per direction of eic. pipes cables etc. not exceeding 80 mm dia. 3 filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 4 supplying and filling in plinth with foundation plinth wall sand under floors including watering ramming consolidating and dressing complete as per direction of eic. 5 surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m all kind of soil. 6 diluting and injecting chemical emulsion for postconstructional antitermite treatment excluding the cost of chemical emulsion treatment of soil under existing floors using chemical emulsion the existing floor. 7 treatment of existing masonry using chemical emulsion at the rate one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1 isto 2 1 cement isto 2 coarse sand to the full depth of the hole with chlorpyriphos or lindane ec 20 per cent with 1 percent concentration 8 providing and laying damp proof course 40mm thick with cement concrete 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate 12.5 mm nominal size. 9 extra for providing and mixing water proofing material in cement concrete work at the rate 1 kg per 50kg of cement. 10 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 isto 3 isto 6 1 cement isto 3 coarse sand isto 6 graded stone aggregate 20 mm nominal size including cost of cement reinforced cement as per direction of eic. 11 rcc in retaining walls roofs return walls walls any thickness including attached pilasters columns piers abutments pillars posts struts buttresses string or lacing courses parapets coping bed blocks anchor blocks plain window sills fillets upto floor five level excluding the cost of centering shuttering and finishing 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20 mm nominal size. 12 centering and shuttering including strutting propping etc. and removal of form for lintels beams plinth beams girders bressumers and cantilevers as per direction of eic. 13 reinforcement for rcc work including straightening cutting bending placing in position and binding all complete cold twisted bars 14 brick work with fps bricks of class designation 75 in foundation and plinth in cement mortar 1 isto 6 1 cement isto 6 coarse sand including mixing of mortar laying of bricks raking joints curing etc complete including cost of cement specification and direction of eic. 15 brick work with fps bricks of class designation 75 in super structure in cement mortar 1 isto 6 1 cement isto 6 coarse sand including mixing of mortar laying of bricks raking joints curing etc complete including cost of cement specification and direction of eic. 16 half brick masonry with fps bricks of class designation 75 in superstructure above plinth level upto floor v level. cement mirtar 1 isto 4 1 cement isto 4 coarse sand complete as per the direction of eic. 17 providing and fixing isi marked flush door shutters conforming to is2202 part i decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30mm thick including isi marked stainless steel butt hinges with necessary screws complete as per the direction of eic. 18 providing and fixing oxidised ms sliding door bolts with nuts and screws etc. complete 300 into 16mm 19 providing and fixing oxidised ms tower bolts black finish barrel type with necessary screws etc. complete 20 providing and fixing oxidised ms handles with necessary screws etc. complete 125mm 21 providing and fixing factory made steel glazed doors windows and ventilators side or top or centre hung with beading and all members of standard rolled steel sections joints mitred and flash butt welded and sash bars tenoned and riveted with 15 into 3mm lugs 10cm long embedded in cement concrete blocks 15 into 10 into 10cm of 1isto 3 isto 6 1 cement isto 3 coarse sand isto 6 graded stone aggregate 20mm nominal size or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including providing and fixing of hinges pivots float glass panes with glazing clips and special metal sash putty of approved make and a priming coat of approved steel primer excluding the cost of metal beading and other fittings except necessary hinges or pivots complete as per approved design complete as per the direction of eic. 22 providing and fixing tiron frames for doors windows and ventilators of mild steel tee ections joints mitred and welded with 15 into 3 mm lugs 10cm long embedded in cement concrete blocks 15 into 10 into 10 cm of 1 isto 3 isto 6 1 cement isto 3 coarse sand isto 6 graded stone aggregate 20 mm nominal size or with wooden plugs and screws or rawl plugs and screws or with dash fastener or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer complete as per the direction of eic. 23 providing and fixing ms fan clamp type i or ii of 16mm dia ms bar bent to shape with hooked ends in rcc slabs beams during laying including painting the exposed portion of loop all as per standard design complete complete as per the direction of eic. 24 cement concrete flooring 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete complete as per the direction of eic. 40mm thick with 20 mm nominal size stone aggregate. 25 providing and laying ceramic glazed floor tiles 300 into 300 mm thickness to be specified by the manufacturer of 1st quality conforming to is 15622 of approved make in colours such as white ivory grey fume red brown laid on 20mm thick cement mortar 1 isto 4 1 cement isto 4 coarse sand including pointing the joints with white cement and matching prgment etc. complete as per the direction of eic. 26 providing and fixing 1st quality ceramic glazed wall tiles conforming to is 15622 of approved make in all colours shades except burgundy bottle green black of any size as approved by eic in skirting, risers of steps and dados over 6 mm thick bed of cement mortar 1 isto 3 1 cement isto 3 coarse sand and jointing with grey cement slurry at the rate 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 27 providing and fixing on wall face pvc rain water pipes or toilet pipe including ms holder bat clamps wooden pegs etc with accessories like ci grating plain bend head shoes etc including filling joints with spun yarn soaked in neat cement slurry and cement mortar 1 isto 2 1 cement isto 2 fine sand including a coat of primer cost of all materials labour tools and tackles etc complete complete as per the direction of eic. upvc pipes working pressure 4 kgpersqm single socketed pipe 110 mm dia 28 12mm cement plaster of mix 1 isto 4 1 cement isto 4 fine sand complete as per the direction of eic. 29 15mm cement plaster on the rough side of single or half brick wall of mix 1 isto 6 1 cement isto 6 fine sand complete as per the direction of eic. 30 6mm cement plaster 1 isto 3 1 cement isto 3 fine sand finished with a floating coat of neat cement and thick coat of lime wash on top of walls when dry for bearing of rcc slabs and beams complete as per the direction of eic. 31 supplying and applying two 2 coats of white wash over old work at various elevations including preparation of surfaces cleaning etc. complete with all materials labour tools and tackle etc scaffolding work as per specifications and directions of eic. composition water at the rate 5 litres per kg of lime for making cream. fevicol ddl at the rate 4 gm per litre of lime cream. robin blue at the rate 2gm. per kg lime. 32 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work two or more coats over and including priming coat with cement primer. 33 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade approved brand and manufuacturer and ist quality 10 yrs like asian berger nerolac ici dulux old work one or more coats applied at the rate 0.83 ltr per10 sqm. 34 applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work second coat 35 painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work. 36 providing groove of uniform size in plastered surface as per approved pattern using wooden battens bnailed to the under layer including of wooden battens repairs to the edges of the plaster panel and finishing the groove complete as per specifications and direction of eic including all materials labour tools and tackles etc complete. 12mm into 12mm 37 demolishing cement concrete manually or by mechanical means including disposal of material within 50 metres lead as per direction of eic. 1 isto 3 isto 6 or richer mix 38 demolishing brick work in cement mortar including tacking of serviceable material and disposal of unserviceable material within 50 metres lead including all materials labour tools and tackles etc complete 39 making plinth protection 50mm thick of cement concrete 1 isto 3 isto 6 1 cement isto 3 coarse sand isto 6 graded stone aggregate 20 mm nominal size over 75 mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 40 providing and fixing water closet squatting pan indian type wc pan with 100mm sand cast iron p or s trap 10 litre low level white pvc flushing cistern with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern wc pan of size 580 into 440mm with integral type foot rests. 41 providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors ci trap and bend 100 mm inlet and 75 mm outlet sand cast iron sands as per is1729 42 providing and fixing 600 into 450 mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground fixed to wooden cleats with c p brass screws and washers complete 43 providing & fixing 600 into 120 into 5mm glass shelf with edges round of supported on anodised aluminium angle frame with c p brass brackets and guard rail complete fixed with 40mm long screws rawl plugs etc. complete 44 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm long towel rail with total legth of 645mm width 78mm and effective height of 88mm weighing not less than 190 gms. 45 providing and fixing 2mm thick plaster of paris 46 providing and fixing gi pipe complete with gi fittings and clamps i or c cutting and making good the walls etc. complete as per the direction of eic. 15mm dia nominal bore 47 providing and fixing gi pipe complete with gi fittings and clamps i or c cutting and making good the walls etc. complete as per the direction of eic. 20mm dia nominal bore 48 providing and fixing gi pipe complete with gi fittings and clamps i or c cutting and making good the walls etc. complete as per the direction of eic. 25mm dia nominal bore 49 providing and fixing gun metal gate valve with ci wheel of approved quality screwed end 25 mm nominal bore 50 providing and fixing cp brass shower rose with 15 or 20mm inlet 100 mm diameter make emco 51 providing and fixing c p brass bib cock of approved quality make emco 15mm nominal bore 52 constructing masonry chamber 60 into 60 into 75cm inside with 75 class designation brick work in cement mortar 1 isto 4 1 cement isto 4 coarse sand for sluice valve with ci surface box 100mm top diameter 160 mm bottom diameter and 180mm deep inside with chained lid and rcc top slab 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20 mm nominal size necessary excavation foundation concrete 1 isto 5 isto 10 1 cement isto 5 fine sand isto 10 graded stone aggregate 40mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement isto 3 coarse sand 12mm thick finished with a floating coat of neat cement complete as per standard design with fps bricks complete as per the direction of eic. 53 providing & fixing c p brass stop cock concealed of standard design and of approved make conforming to is 8931.15mm nominal bore. 54 making soak pit 2.5 m diameter 3.0 metre deep with 45 into 45cm dry brick honey comb shaft with bricks of class designation 75 and sw drain pipe 100mm diameter 1.8m long complete as per standard design with fps bricks 55 grading roof for water proofing treatment with cement concrete 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20mm nominal size 56 providing and placing on terrace at all floor levels polyethylene water storage tank isi 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflor pipes but without fittings and the base support for tank.make sintex 57 providing and fixing wash basin with ci brackets 15mm cp brass pillar taps 32mm cp brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required white vitreous china wash basin size 630 into 450 mm with a pair of 15mm c. p brass pillar taps complete as per the direction of eic. 58 wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in surface or recessed medium class pvc conduit as required 2 into 6 sqmm plus 1 into 6 sq mm earth wire 59 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc.as required 60 wiring for light or power plug with 2 into 4 sqmm frls pvc insulated copper conductor single core cable in surface ot recessed medium class pvc conduit alongwith 1 no. 4 sqmm frls pvc insulated copper conductor single core cable for loop earthing as required 61 supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required 62 3 pin 5or6 a socket outlet 63 6 pin 15or16 a socket outlet 64 supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required 65 supplying and fixing following size or modules gi box alongwith modular base and cover plate for modular switches in recess etc. 1 or 2 module 75 mm into 75 mm 66 4 module 125 mm into 75 mm 67 8 module 125 mm into 125 mm 68 supplying and fixing 3 pin 5 a ceiling rose on the existing junction box or wooden block including connections etc. as required 69 erection of wall bracket or ceiling fittings of all sizes and shapes containing upto two gls lamps per fitting complete with all accessories including connections etc. as required 70 installation testing and commissioning of pre wired fluorescent fitting or compact fluorescent fitting of all types complete with all accessories and tube etc. directly on ceiling or wall including connections with 1.5 sqmm fr pvc insulated copper conductor single core cable and earthing etc. as required 71 providing and fixing following rating and breaking capacity mccb in existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required 100 a 16 ka 72 supplying and fixing 5 a to 32 a rating 240or415 v 10 ka c curve miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections testing and commissioning etc. as required single pole 6 amp 73 supplying and fixing following rating four pole three phase and neutral 415 v residual current circuit breaker rccb having a sensitivity current 30 ma in the existing mcb db complete with connections testing and commissioning etc. as required 63 amps 74 earthing with gi earth pipe 4.5 meter long 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal or coke and salt as required 75 supplying and laying 25 mm into 5 mm g.i strip at 0.50 meter below ground as strip earth electrode including connection or terminating with gi nut bolt spring washer etc. as required. jointing shall be done by overlapping and with 2 sets of g.i nut bolt and spring washer spaced at 50 mm 76 fixing of lightning conductor finial single prong with base plate including holes etc. complete as required 77 providing and fixing g.i tape 20 mm into 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.for horizontal run 78 providing and fixing g.i tape 20 mm into 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. for vertical run 79 laying of one number pvc insulated and pvc sheathed or xlpe power cable of 1.1 kv grade of following size direct in ground including excavation sand cushioning protective covering and refilling the trench etc. as required upto 35or50 sq. 80 excavation for cable trench / foundation in soft soil including dressing of sides and ramming of ottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 meter 81 supply of 46inch 1200 mm sweep energy efficient 5 star high speed ceiling fan with electronic regulator size 150 watt make crompton complete in all respect as per specification and direction of eic. high breeze colour brown or ivopry 82 supply 1 into 40w led tube light make philips type bn 550 wled 20 to 300 led linea 83 supply and fixing of single phase energy meter kwh with box of model no. 1plcd meter 5 to 30a catno. wm1018csdl0bok make land t...

Water Resources Department - Jharkhand

33962978 e quotation for non scheduled item rate cast iron stainless steel plate phosphorus bronze en 9 grade round bar single thrust ball bearing suitable for spindle dia. double thrust ball bearing suitable for spindle dia. musical note hollow type rubber ( teflon cladded ) solid musical note type rubber seal ( teflon claded ) musical note hollow type rubber ( plain ) solid musical note type rubber seal ( plain ) flat rubber seal wedge type rubber seal rubber seal jointing adhesive stainless steel counter shank nut, bolt & washer. diver coupling steel core wire rope ( construction 6x36 ) fiber core wire rope ( construction 6x36 ) worm gear box consisting of worm gear, worm shaft, upper & lower thrust heavy side roller gearing, spur gear. ( worm gear id to be made out of phosphorous bronze ) . industrial oxygen gas acetylene gas roller bearing chain pully hydra 14x coles crane ( 360 degree rotating ) brake shoe assembly with all accessories. wire rope u clamp cadmium compound grease rope socket rope thimble winch crab double reduction hoisting system including steel core wire rope of 18 mm diameter etc. rope drum hoisting system consisting of double rope drum with two stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. rope drum hoisting system consisting of single rope drum with single stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. gear box for hoisting system make radicon, greaves, premium or equivalent chain sprocket for s.r.u drive rachet lock system. bearing housing. gear oil for gear box. m.s channels square bar round bar m.s pipe ( hollow type ) ( a ) 75mm dia ( b ) 150mm dia ( c ) 200mm dia ( d ) 250mm dia h. t. bolt ht nut, bolt & washer plummer block 06 mm thick chequired plate accessories forgear operated sluice valve. rubber insertion gland packing gland flange spl. type gland flange bolt nut thrust ball bearing gear box operating wheel gate hanging bracket flange socket tail piece flange collar tail piece...

Water Resources Department - Jharkhand

33950230 supply, installation, fitting, fixing complete job of window a.c. 1.5 tone each, ceiling fan, bracket fan & etc for division office in new combined building at sankosai mango jamshedpur....

South Eastern Railways - Jharkhand

33949412 supply of provision of top operated handle for cbc comprising of following items per loco ( 13 items in 84 nos. ) as followes: ( 1 ) operating rod rh, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 2 ) operating rod lh, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 3 ) operating rod middle, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 4 ) link, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 5 ) top lifting assembly with pin, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 6 ) top lifting hook, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 7 ) inner bracket for cbc operating handle, drg. no. sr.dee / rs / ed / mech 112, qty.= 04. [ 8 ] bracket, drg. no. skdl 3491 ( alt. 1 ) , ref. 1 & 2, qty.= 08 ( 04+04 ) . ( 9 ) split pin 10 dia x 80 long, drg. no. skdl 3491 ( alt. 1 ) , ref. 6, qty.= 04. ( 10 ) spring washer m16 ( ty b ) , drg. no. skdl 3491 ( alt. 1 ) , ref. 7, qty.= 16. ( 11 ) hex. nut m16, drg. no. skdl 3491 ( alt. 1 ) ref. 8, qty.= 16. ( 12 ) hex. head bolt m16 x 45 long, drg. no. skdl 3491 ( alt. 1 ) ref. 9, qty.= 16, ( 13 ) fixing angle, drg. no. skdl 3491 ( alt. 1 ) , ref. 3 ) , qty.= 08.provision of top operated handle for cbc comprising of following items per loco ( 13 items in 84 nos. ) as followes: ( 1 ) operating rod rh, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 2 ) operating rod lh, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 3 ) operating rod middle, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 4 ) link, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 5 ) top lifting assembly with pin, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 6 ) top lifting hook, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 7 ) inner bracket for cbc operating handle, drg. no. sr.dee / rs / ed / mech 112, qty.= 04. [ 8 ] bracket, drg. no. skdl 3491 ( alt. 1 ) , ref. 1 & 2, qty.= 08 ( 04+04 ) . ( 9 ) split pin 10 dia x 80 long, drg. no. skdl 3491 ( alt. 1 ) , ref. 6, qty.= 04. ( 10 ) spring washer m16 ( ty b ) , drg. no. skdl 3491 ( alt. 1 ) , ref. 7, qty.= 16. ( 11 ) hex. nut m16, drg. no. skdl 3491 ( alt. 1 ) ref. 8, qty.= 16. ( 12 ) hex. head bolt m16 x 45 long, drg. no. skdl 3491 ( alt. 1 ) ref. 9, qty.= 16, ( 13 ) fixing angle, drg. no. skdl 3491 ( alt. 1 ) , ref. 3 ) , qty.= 08., provision of top operated handle for cbc comprising of following items per loco ( 13 items in 84 nos. ) as followes: ( 1 ) operating rod rh, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 2 ) operating rod lh, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 3 ) operating rod middle, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 4 ) link, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 5 ) top lifting assembly with pin, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 6 ) top lifting hook, drg. no. sr.dee / rs / ed / mech:103 ( alt. 1 ) , qty.= 02. ( 7 ) inner bracket for cbc operating handle, drg. no. sr.dee / rs / ed / mech 112, qty.= 04. [ 8 ] bracket, drg. no. skdl 3491 ( alt. 1 ) , ref. 1 & 2, qty.= 08 ( 04+04 ) . ( 9 ) split pin 10 dia x 80 long, drg. no. skdl 3491 ( alt. 1 ) , ref. 6, qty.= 04. ( 10 ) spring washer m16 ( ty b ) , drg. no. skdl 3491 ( alt. 1 ) , ref. 7, qty.= 16. ( 11 ) hex. nut m16, drg. no. skdl 3491 ( alt. 1 ) ref. 8, qty.= 16. ( 12 ) hex. head bolt m16 x 45 long, drg. no. skdl 3491 ( alt. 1 ) ref. 9, qty.= 16, ( 13 ) fixing angle, drg. no. skdl 3491 ( alt. 1 ) , ref. 3 ) , qty.= 08. page 1 of 5 run date / time: 15 / 09 / 2022 08:49:17stores pcmm / south eastern rly tender document...

Central Coalfields Limited - Jharkhand

33947383 2 repairing / welding of cracked brace arm 02 nos. and its mounting pin and repairing of rh trunion cover its mtg. bracket, broken bolt of trunion cover taking out, new bolt with washer fitted to be done and 1 no. yokeshaft repairing work lh side...

Water Resources Department - Jharkhand

33946632 e quotation for supply of non scheduled item rate. cast iron stainless steel plate phosphorus bronze en 9 grade round bar single thrust ball bearing suitable for spindle dia. double thrust ball bearing suitable for spindle dia. musical note hollow type rubber ( teflon cladded ) solid musical note type rubber seal ( teflon claded ) musical note hollow type rubber ( plain ) solid musical note type rubber seal ( plain ) flat rubber seal wedge type rubber seal rubber seal jointing adhesive stainless steel counter shank nut, bolt & washer. diver coupling steel core wire rope ( construction 6x36 ) fiber core wire rope ( construction 6x36 ) worm gear box consisting of worm gear, worm shaft, upper & lower thrust heavy side roller gearing, spur gear. ( worm gear id to be made out of phosphorous bronze ) . industrial oxygen gas acetylene gas roller bearing chain pully hydra 14x coles crane ( 360 degree rotating ) brake shoe assembly with all accessories. wire rope u clamp cadmium compound grease rope socket rope thimble winch crab double reduction hoisting system including steel core wire rope of 18 mm diameter etc. rope drum hoisting system consisting of double rope drum with two stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. rope drum hoisting system consisting of single rope drum with single stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. gear box for hoisting system make radicon, greaves, premium or equivalent chain sprocket for s.r.u drive rachet lock system. bearing housing. gear oil for gear box. m.s channels square bar round bar m.s pipe ( hollow type ) ( a ) 75mm dia ( b ) 150mm dia ( c ) 200mm dia ( d ) 250mm dia h. t. bolt ht nut, bolt & washer plummer block 06 mm thick chequired plate rubber insertion gland packing gland flange spl. type gland flange bolt nut thrust ball bearing gear box operating wheel gate hanging bracket flange socket tail piece flange collar tail piece...

Water Resources Department - Jharkhand

33946605 supply of non scheduled item rate. 1 cast iron 2 stainless steel plate 3 4 5 phosphorus bronze 6 en 9 grade round bar 7 8 9 single thrust ball bearing suitable for spindle dia. 12 double thrust ball bearing suitable for spindle dia. 15 musical note hollow type rubber ( teflon cladded ) 16 17 solid musical note type rubber seal ( teflon claded ) 18 19 musical note hollow type rubber ( plain ) 21 solid musical note type rubber seal ( plain ) 22 23 flat rubber seal 26 wedge type rubber seal 29 rubber seal jointing adhesive 30 stainless steel counter shank nut, bolt & washer. 33 diver 34 35 coupling 36 steel core wire rope ( construction 6x36 ) 37 38 39 fiber core wire rope ( construction 6x36 ) 40 41 42 worm gear box consisting of worm gear, worm shaft, upper & lower thrust heavy side roller gearing, spur gear. ( worm gear id to be made out of phosphorous bronze ) . 46 industrial oxygen gas 48 acetylene gas 50 roller bearing 54 chain pully 56 hydra 14x 57 58 coles crane ( 360 degree rotating ) 60 brake shoe assembly with all accessories. 61 wire rope u clamp 62 cadmium compound 63 grease 64 rope socket 65 rope thimble 66 winch crab double reduction hoisting system including steel core wire rope of 18 mm diameter etc. 69 rope drum hoisting system consisting of double rope drum with two stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. 73 rope drum hoisting system consisting of single rope drum with single stage reduction gear arrangement, with extended shaft, coupling, s.r.u manual drive unit break etc. of capacity. 77 gear box for hoisting system make radicon, greaves, premium or equivalent 80 chain sprocket for s.r.u drive 81 rachet lock system. 82 bearing housing. 83 gear oil for gear box. 84 m.s channels 90 square bar 97 round bar 104 m.s pipe ( hollow type ) 105 ( a ) 75mm dia 108 ( b ) 150mm dia 111 ( c ) 200mm dia 114 ( d ) 250mm dia 117 h. t. bolt 123 ht nut, bolt & washer 129 plummer block 136 06 mm thick chequired plate 137 rubber insertion 140 gland packing 143 gland flange 146 spl. type gland flange bolt nut 149 thrust ball bearing 152 gear box operating wheel 155 gate hanging bracket 158 flange socket tail piece 161 flange collar tail piece...

Bharat Coking Coal Limited - Jharkhand

33939641 administrative approval for repairing and straitening of drill guide assly and boom assly, repairing of feed sprocket its pin03nos and repairing of bracket ( boom mounting ) its pin in icm 260 sl.no drh 100 of kuya ocp ba ix. ...

Central Coalfields Limited - Jharkhand

33921945 repairing of silencer assembly, rod opening wrench drill rod adapter and guide shoe, denting of platform and chassis with repairing, denting and centering of two bar bracket of idm 30 cil no 1314....

East Central Railway - Jharkhand

33907131 auction sale of disposal of cast iron such as ( 1 ) coupler body qty=12nos.=1867kg, ( 2 ) draft qty=25nos.=3510kg, ( 3 ) yoke qty=9nos.=877kg, ( 4 ) brake beam nl type qty=3nos.=190kg, ( 5 ) back stop cbc qty=24nos=730kg ( 6 ) narrow jaw adaptor qty=25nos.=305kg ( 7 ) bottom casting qty=3nos.=128kg ( 8 ) top casting qty=12nos.=526kg, ( 9 ) adj. lever qty=20nos.=390kg ( 10 ) aar lock qty=19nos.=120kg ( 11 ) pu pad qty=13nos.=68kg ( 12 ) door operating lever qty=2nos.=59kg ( 13 ) horizontal lever qty=4nos.=110kg, ( 14 ) cbc support plate cum epr bracket qty=1no.=25kg ( 15 ) cbc support plate qty=1no.=13kg ( 16 ) nuckle pin qty=200nos.=442kg ( 17 ) bolster of casnub bogie qty=01no. / 2parts =640kg, lot no. cw / peh / 22 / 03, location scrap yard c&w peh. [ i ] loading by the labour of purchaser, [ ii ] delivery on the basis of actual weight. ...

Bharat Coking Coal Limited - Jharkhand

33897712 repairing of lhs first axle bracket and shackle, enginesuspension system and ac repairing of scania sl. no. jh10an / 7479 of auto workshop, laikdih, cv area. tender no: bccl / cv / exc / e tender / / 22 23 / 45date 12.09.2022...

Bharat Coking Coal Limited - Jharkhand

33882136 bids are invited for bracket for carrying roller br 16 1 for 1400 mm belt ( q3 ) , bracket for carrying roller for 1200 mm belt ( q3 ) , bracket for carrying roller br 24 1 for 1000 mm belt ( q3 ) , bracket for carrying roller for 1500 mm belt ( q3 ) , bracket for carrying roller for 1400 mm belt with 45 degree through angle ( q3 ) ...

Central Coalfields Limited - Jharkhand

33871667 repairing of cac bracket and its mounting by brazing of dumper ( model cat773e sl no. 1108 and 1015 ) deployed at karma ocp, kuju area....

Bharat Coking Coal Limited - Jharkhand

33859767 repairing, replacement of carrying roller brackets, carrying roller, return roller brackets and deck plate, etc. of unit 504, 701 and 702 conveyor at moonidih coal washery. ...

South Eastern Railways - Jharkhand

33857143 supply of set of safety bracket assembly of bp and fp end cocks for wag 9 / wap 7 locomotives consisting of two items etc.set of safety bracket assembly of bp and fp end cocks for wag 9 / wap 7 locomotives consisting of two items etc., set of safety bracket assembly of bp and fp end cocks for wag 9 / wap 7 locomotives consisting of two items ( i ) ms plate for bracket assembly of bp and fp end cocks for wag 9 / wap 7 locos as per s.c. rly. drg. no. c / els / lgd / ex.ftg / 4 / 25 material: ms as per ls: 2062. note: thickness of the plate is 20 mm instead of 16mm qty 01 no. and ( ii ) m s channel of size 150 x 75 x 6 ( 430 mm long ) along with ms plate of size 150 x 75 x 16 mm i.e. ms plate ( ref: 2 ) to be welded to the channel ( ref:1 ) at one end as per s c railway drg. no. c / els / lgd / ex.ftg / 3 / 12 att 1 reference no. 1& 2 qty 02 nos. ( 1 set = 2 items in 3 nos. ) ( 04 set of sample to be got approved before bulk supply of material ) . amm / els / bksc electric jharkhand 80.00 set loco shed stores depot , ser smm / els / bndm electric odisha 100.00 set loco shed stores depot , ser smm / els / rou electric odisha 100.00 set...

Electric Works Division - Jharkhand

33854315 quotation inviting basic rate of material for energy department jharkhand. 1 spreader link for 400a set of 8 nos ( make abb / l&t / c&s ) 2 spreader link for 200a set of 8 nos ( make abb / l&t / c&s ) 3 extended rotary handle ( 400 a ) 4 extended rotary handle ( 200 a ) 5 surge protection device 100ka tpn ( make abb / l&t / c&s ) 6 spreader link for 800a set of 8 nos ( make abb / l&t / c&s ) 7 extended rotary handle ( 800 a ) 8 control wiring of main distribution board with copper busbar and copper flexible cable, nut bolt, other accessories 9 s / f 1 it lvory fabric with 3 watt led, chrome finishing wll lamp with dimention ( l:w:h:155:280:405 ) mm model no. wbr chr mb12021192a ( make jaquar / bajaj / havell or eqi ) wall mounted reading lamp. 10 s / f ceiling pinochio chrome, crystal drip with g9 bulb 40w x 8 of dimension ( length :430, width:430, h:225mm ) including connection as reqd. ( jhumer ) 11 wall mounted industrial fan. 12 led mirror light. 13 860mm decorative cast iron polemake: bajaj ( nayaab ) or equivelent. 14 supply of 25w decorative led light fitting havingcct 3000k make bajaj, model bcf dra 25w led wh op tmor equi. 15 7 mtr ( 6m+1m ) decorative poleincluding bracket of 1 mtr single arm make bajaj ( dobus ) or equi. 16 4 mtr ( 3m + 1m ) , decorative pole incuding bracket of 1 mtr single arm make bajaj ( dobus ) or equi. 17 120w decorative post top led light having supn aluminium powder coated housign with pdc heat sink, optical grade injection moulded polycarbonate diffuser and ip65 protection make bajaj ( borage ) or equivelent. 18 60w decorative post top led light having supn aluminium powder coated housign with pdc heat sink, optical grade injection moulded polycarbonate diffuser and ip65 protection make bajaj ( borage ) or equivelent....

Jharkhand Bijli Vitran Nigam Limited - Jharkhand

33824379 tender for supply of materials clamp, ms channel, 33 kv pole top bracket, 33 kv back clamp for top breacket, 33 kv cross arm, ms base plate, back clamp, support clamp, back calmp, 33 kv angle stay clamp, 33 kv dp channel support, earth clamp, 11 kv pole top bucket, support clamp, 11 kv back clamp, support clamp for 11 kv v cross arm, aluminium pipe, aluminiu pipe connector, earthing gi strip, pg clamp, gi wire, 33 kv post insulator, 11 kv hg fuse, buckle strip etc....

Central Coalfields Limited - Jharkhand

33813811 repairing of channel str, mtg plate, bracket assy. cf cover, adaptor and cf cover applicable in 02 nos. water tanker (28096 and 28110) of amrapali ocp...

South Eastern Railways - Jharkhand

33811932 supply of set of modified operating handle for cbc as per rdsos modification sheet no. rdso / 2016 / el / ms / 0454 ( rev. 0 ) ( 1 ) lever coupler release ( emd ) part no. 10632263= 02 nos. ( 2 ) lever coupler release ( emd ) part no. 10632261 = 02 nos. ( 3 ) bail ( emd ) part no. 40057907 = 02 nos. ( 4 ) bracket ( emd ) part no. 9520074 = 08 nos. ( 5 ) uncoupling clevis ( drg. no. 8024774 ) = 02 nos. ( 6 ) block for modified operating handle ( drg. no. kgp / el 814 ) ( alt 1 ) =08 nos. ( 7 ) lock lifter for modified operating handle drg. no. kgp / el 813 ( alt 1 ) = 02 nos.set of modified operating handle for cbc as per rdsos modification sheet no. rdso / 2016 / el / ms / 0454 ( rev. 0 ) ( 1 ) lever coupler release ( emd ) part no. 10632263= 02 nos. ( 2 ) lever coupler release ( emd ) part no. 10632261 = 02 nos. ( 3 ) bail ( emd ) part no. 40057907 = 02 nos. ( 4 ) bracket ( emd ) part no. 9520074 = 08 nos. ( 5 ) uncoupling clevis ( drg. no. 8024774 ) = 02 nos. ( 6 ) block for modified operating handle ( drg. no. kgp / el 814 ) ( alt 1 ) =08 nos. ( 7 ) lock lifter for modified operating handle drg. no. kgp / el 813 ( alt 1 ) = 02 nos., set of modified operating handle for cbc as per rdsos modification sheet no. rdso / 2016 / el / ms / 0454 ( rev. 0 ) ( 1 ) lever coupler release ( emd ) part no. 10632263= 02 nos. ( 2 ) lever coupler release ( emd ) part no. 10632261 = 02 nos. ( 3 ) bail ( emd ) part no. 40057907 = 02 nos. ( 4 ) bracket ( emd ) part no. 9520074 = 08 nos. ( 5 ) uncoupling clevis ( drg. no. 8024774 ) = 02 nos. ( 6 ) block for modified operating handle ( drg. no. kgp / el 814 ) ( alt 1 ) =08 nos. ( 7 ) lock lifter for modified operating handle drg. no. kgp / el 813 ( alt 1 ) = 02 nos. page 1 of 5 run date / time: 06 / 09 / 2022 11:39:03stores pcmm / south eastern rly tender document...

South Eastern Railways - Jharkhand

33806535 supply of roller bracket for boxnhl ( bmbs ) wagon.drawing no. : rdsos drg. no. wd 09034 s 10, alt. 9, item no. 16.material and specification : as per drawing.roller bracket for boxnhl ( bmbs ) wagon.drawing no. : rdsos drg. no. wd 09034 s 10, alt. 9, item no. 16.material and specification : as per drawing., roller bracket for boxnhl ( bmbs ) wagon.drawing no. : rdsos drg. no. wd 09034 s 10, alt. 9, item no. 16.material and specification : as per drawing....

Central Coalfields Limited - Jharkhand

33801654 repairing of channel str, mtg plate, bracket assy. cf cover, adaptor and cf cover applicable in 02 nos. water tanker ( 28096 and 28110 ) of amrapali ocp...

Central Coalfields Limited - Jharkhand

33780563 repairing / welding of main arm mounting bracket rhs which is connected with blade damaged during operation of bd355 dozer sl. no. 11970, cil no. t 3731. ...