Nagar Palika Nigam - Jharkhand

37820368 tender for supply of 12 mtr high mast in one section construction s355 grade as per bs en 10 025 top dia 100m m , bottom dia 360 mm, plate thickness 3mm, 12 side polygon, galvanisation as per bs en iso 1461, base plate dia 520mm, base plate thickness 25mm , gi single spike (with 14.95% cp& overhead charne)...

East Central Railway - Jharkhand

37810373 supply of diffrent type pole, flag & flag stand, 20 feet ( 1.25 inch ) pole. technical details thickness 4mm diameter 1.25 inch shape round material gi pipe unit pipe length 20 feet make jindal or similar [ warranty period: 30 months after the date of delivery ] , l type ss flag stand height ( 4 feet ) technical details height of pole 4 feet pole thickness 2 mm diameter at the bottom end of the pole 30mm diameter at the top end of the pole 30mm thickness of base plate 4mm based diameter 160mm material ss coating polished mounting based provided yes hole in the mounting based provided yes necessary accessories provided for hosting flag yes no of section in pole 1 ( thickness 2mm, diameter 30mm ) [ warranty period: 30 months after the date of delivery ] , t type ss flag stand height ( 5 feet ) technical details height of pole 5 feet pole thickness 2 mm diameter at the bottom end of the pole 30mm diameter at the top end of the pole 30mm thickness of base plate 4mm based diameter 160mm material ss coating polished mounting based provided yes hole in the mounting based provided yes necessary accessories provided for hosting flag yes no of section in pole 2 ( thickness 2mm, diameter 30mm ) [ warranty period: 30 months after the date of delivery ] , small flag size ( 5x2.5 feet ) flag size 5x2.5 feet cloth type plain sation fabric colourfull shape rectangular with fitting yes [ warranty period: 30 months after the date of delivery ] page 1 of 5 run date / time: 23 / 05 / 2023 12:00:02dhn / div / east central rly tender document , large flag ( 10x2.5 feet ) flag size 10x2.5 feet cloth type plain sation fabric colourfull shape rectangular with fitting yes [ warranty period: 30 months after the date of delivery ] , 10 feet ( 0.75 inch ) pole. thickness 4mm diameter 0.75 inch shape round material gi pipe unit pipe length 10 feet make jindal or similar [ warranty period: 30 months after the date of delivery ] ...

Central Coalfields Limited - Jharkhand

37789867 replacement of damaged and bended head drives bearing base plate, channel plates, angles monorail of unit no. 208 bucket elevator main plant of kedla washery...

Central Coalfields Limited - Jharkhand

37750881 modification of base plate for 250kw motor for running of skyes make pump and extension of 8 inch pipeline for 02 nos pumps and extension of 6 inch pipeline for shifting of 01 pump at rajhara ocp under rajhara area...

Drinking Water And Sanitation Department - Jharkhand

37695394 supply installation testing and commissioning of pump sets, motor control panel, stabilizer and its allied works at bagodih multi village rural water supply scheme at bagodih ( a ) raw water pumping plant 1.01 supplying all labour tools and tackles for taking out old and damaged vt pump sets from intake well with all accessories , demolition of mounting channel for installation of new vertical turbine pump sets. 1.02 supplying, installation, testing and commissioning of electrically driven vertical turbine pump sets kirloskar / wpil / mather & plate / jyoti having discharge capacity of raw water 90 m3 / h against a total head of 75 meter, in all concern coupled with vertical hollow shaft sq. cage induction motor make ( kirloskar / crompton / jyoti / abb ) , operated on 415 + 10% volts, 50hz, 1460 rpm ( 10% above the capacity of pump ) with sole plate, discharge head, m.s. d.f. column assembly random length of 5 ft, total 60 ft. s.s. line shaft, s.s, socket, spider bearing with rubber cut less bush, cidf sluive valve 1 no, cidf nr valve 1 no, pressure gauge 1 no ets all complete. 1.03 supplying all labour tools and tackles for making pcc foundation 2′x2′x1′ with all materials such as cement , sand, stone chips, foundation bolt etc all complete including fixing of sole plate for installation of new vt pump sets 1.04 providing floor / wall mounted cubical l.t power control panel fabricated with ms sheet and painted, dust and vermin proof, proper ventilated consisting of: proper distribution 200 amp copper bus bar 4 pole 1 set micro processor base tpn mccb 200 amp l&t / siemens make with earth fault relay for incoming feeder – 1no. mccb 160 amp tp l&t / siemens / bch / schneider make for outgoing feeder 2 nos ( 1no for each pump sets ) , 32a dp mcb for lighting 1 no., suitable size of fully automatic star delta starter l&t / bch / schnider / havells make 2 nos., ( 1no for each pump sets ) 0 500 v voltmeter with selector switch 1 set, ct operated ampere meter ( 0 120a ) with ct 2 sets, phase indicating neon lamp 6nos, s.p.p. 2nos , doing internal wiring with proper gauge of copper wire etc all complete job and testing on load. 1.05 cost towards supplying and laying of 16mm2 x , 3 core pvc insulated and pvc sheathed , 1.1 kv grade unarmored copper cable of reputed make and isi marked doing connection from panel to both motor. jsor dwsd 2021 1.06 cost towards making cable mouth for 16mm2 1.07 cost of doing internal light wiring of pump house with 7 / 18 single core copper wire will all required making short point 1 no, medium point 4 nos, long point 1 no with supplying and fixing 4′x40 watt tube light 3 nos, 25 watt, led flood light with bracket 1 no etc all complete. 1.08 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry with cover plate having locking arrangements and watering pipe 2.7 meter long etc with charcoal / coke and salt as required for chemical earthing. 1.09 supplying and laying of 8 swg copper / gi wire for making earthing connection in two from earthing station to panel to motor . 1.10 supplying and fixing 3 ton capacity triple gear chain pulley block with 6 meter lifting chain of reputed make and isi marked. 1.11 supplying 75 kva servo controlled voltage stabilizer suitable for input voltage 280 480 volts, output voltage of 400 volt±1%, 3 ph, 50 hz, with copper wound transformer ( oil cooled ) , unbalanced type, air cooled / oil cooled, three phase, frequency : 50 hz. speed of correction : 35v / second. regulation : + 1% from no load to full load.ambient temperature : 0 to 55 degree centigrade ( designed for indoor / outdoor continuous operation. operation : automatic cum manual, mcb for short circuit & over load protection, high volt low volt indicator & volt meter with all necessary switches and indicator the stabilizer shall function satisfactory even if incoming supply is unbalanced between phases within range of 10%. the stabilizer should be constructed in cubical box with bidirectional wheels for easy handling, necessary monitors and user’s controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and output voltage, auto / manual selector switch, raise / low push button etc. suitable capacity termination strips and bus bars for incoming and outgoing cable should be provided. all three phases shall independently monitored and corrected. make – powerline / servokon 1.12 supplying and fitting 200 amp changeover switch. make – havell’s / hpl 1.13 supplying and filling transformer oil. 1.14 supplying and laying 120 sq. mm x 3.5 core pvc sheathed & pvc insulated, 1.1 kv grade aluminum unarmoured cable. make – polycab / kei / universal / isi 1.15 cost for supplying and laying delivery pipe line with s / f of 4dia heavy duty gi pipe 5, flange 5nos., rubber insertion 5kg, nut bolt 8kg, with cutting of pipe in required size and welding with all labour tools and tackles. ( b ) clear water pumping plant 1.16 supplying all labour tools and tackles for taking out old and damaged c / f pump set with all accessories , demolition of foundation for installation of new hsc centrifugal pump sets. 1.18 supplying, installation, testing and commissioning of electrically driven horizontal split casing centrifugal pump set make ( kirloskar / wpil / mather & plate / jyoti ) having discharge capacity of clear water 90 m3 / h against total head of 30 meter coupled with tefc sq. cage induction motor make ( kriloskar / crompton / jyoti / abb ) operated on 415 + 10% volts, 50hz, 1470 rpm mounted on common m.s. fabricated base plate with cidf sluice valve 1 no, cidf nr valve 1 no, foot valve 1 no, pressure gauge 1 no, tyre coupling 1 set etc all complete. 1.19 supplying all labour tools and tackles for making pcc foundtiaon 1nos, of size 6′x3x3′ with all materials such as cement , sand, stone chips, foundation bolt 6nos etc all complete and plastering and punning over exposed surface. 1.20 cost for supply and laying of suction pipe line with s / f of 6 dia heavy duty g.i. pipe 6m, bend 2 nos., flange 6 nos., nut, bolt, washer 10kg, rubber insertion etc, cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges.with cp & ohc. ( rate after deducting the scrap materials. ) 1.21 providing floor / wall mounted cubical l.t power control panel fabricated with ms sheet and painted, dust and vermin proof, proper ventilated, consisting of – proper distribution 100 amp copper bus bar 4 pole 1 set micro processor base tpn mccb 100 amp l&t / siemens make with earth fault relay for incoming feeder – 1no. mccb 63 amp tp l&t / siemens make for outgoing feeder 2 nos. ( 1no for each pump sets ) suitable size of fully automatic star delta starter l & t / bch / schnider make 2 nos. 0 500 v voltmeter with selector switch 2nos ct operated ampere meter 0 100a ) with ct 2 sets with selector switch 2nos, phase indicating neon lamp 6nos, s.p.p. 2nos doing internal wiring with proper gauge of copper wire etc all complete job and testing on load. 1.22 cost towards supplying and laying of 10 mm2 , 3 core pvc insulated and pvc sheathed, 1.1 kv grade unarmered copper cable of reputed make and isi marked for doing connection from panel to motor. jsor dwsd 2021 1.23 cost towards making cable mouth for 10mm2 1.24 cost of doing internal light wiring of pump house with 7 / 18 single core copper wire will all required making short point 1 no, medium point 4 nos, long point 1 no with supplying and fixing 4′x40 watt tube light 3 nos, 25 watt, led flood light with bracket 1 no etc all complete. 1.25 cost for doing chemical earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry with cover plate having locking arrangements and watering pipe 2.7 meter long etc with charcoal / coke and salt as required for chemical earthing. 1.26 supplying and laying of 8 swg copper / gi wire for making earthing connection in to from earthing station to panel to motor . 1.27 cost for supplying and laying delivery pipe line with s / f of 4dia heavy duty gi pipe 5, flange 5nos., rubber insertion 5kg, nut bolt 8kg, with cutting of pipe in required size and welding with all labour tools and tackles. 2 supply, installation, testing and commissioning of 1no v.t. pump set at raw water pumping plant and 1 no h.s.c. pump set at clear water pumping plant and its allied works at rural water supply scheme, dumri ( a ) raw water pumping plant, dumri 2.01 supplying all labour tools and tackles for taking out old and damaged vt pump sets from intake well with all accessories , demolition of mounting channel for installation of new vertical turbine pump sets. 2.02 cost towards supplying, installation and commissioning of vertical turbine water lubricated single / multi stage pump set of kirlosker / jyoti / mather & platt / wpil make capable of discharge 36.55 lps against total head 36 m, with suitable discharge head base plate and accessories such as m.s. column pipe of suitable dia, flange type 40ft ( 5ft length 7nos and 2.5ft 2nos ) , line shaft , spider bearing with rubber cutless bush for 40ft column assembly, coupled with suitable capacity vertical hollow shaft squirrel cage tefc induction motor of kirlosker / jyoti / cgl / abb / bhel make , operated on 415±10% volt , 3 phase, 50 c / s, a.c. supply having 1450 rpm , with non reversible rachet, including cost of supplying fitting and fixing of all required accessories such as strainer, sluice valve, n.r. valve, pressure gauge etc all complete. 2.03 cost for supply and fitting of ml3 starter of l&t make. 2.04 cost for breaking of old pcc foundation and making new pcc foundation size ( 600mm x 600mm x 400mm ) with supply and fitting of 5 / 8 inch dia x 300mm long foundation bolt 4nos, stone chips, sand, cement etc and plastering and punning of exposed surface etc all complete 2.05 cost for supplying and laying of 3core 10 sq. mm, copper cable unarmoured, p.v.c insulated and p.v.c. sheathed 1100 v grade with isi mark from motor to starter in 2 length each for both motor. 2.06 cost for doing socketing of 3 core 10 sqmm cable, with supplyu and fiotting of copper lugs with all required insulating materials. 2.07 supplying 50 kva servo controlled voltage stabilizer suitable for input voltage 280 480 volts, output voltage of 400 volt±1%, 3 ph, 50 hz, with copper wound transformer ( oil cooled ) , unbalanced type, oil cooled, three phase, frequency : 50 hz. speed of correction : 35v / second. regulation : + 1% from no load to full load.ambient temperature : 0 to 55 degree centigrade ( designed for indoor / outdoor continuous operation. operation : automatic cum manual, mcb for short circuit & over load protection, high volt low volt indicator & volt meter with all necessary switches and indicator the stabilizer shall function satisfactory even if incoming supply is unbalanced between phases within range of 10%. the stabilizer should be constructed in cubical box with bidirectional wheels for easy handling, necessary monitors and user’s controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and output voltage, auto / manual selector switch, raise / low push button etc. suitable capacity termination strips and bus bars for incoming and outgoing cable should be provided. all three phases shall independently monitored and corrected. make – powerline / servokon 2.08 supplying and fitting 200 amp changeover switch. make – havell’s / hpl 2.09 supplying and filling transformer oil. 2.10 supplying and laying 70 sq. mm x 3.5 core pvc sheathed & pvc insulated, 1.1 kv grade aluminium unarmoured cable. make – polycab / kei / universal / isi 2.11 cost of doing internal light wiring of pump house with 7 / 20 single core copper wire will all required making short point 1 no, medium point 4 nos, long point 1 no with supplying and fixing 4′x40 watt tube light 3 nos, 25 watt, led flood light with bracket 1 no etc all complete. 2.12 supplyng and fitting of 150 mm dia cidf sluice valve with nut bolts washer insersation rubber with all labour tool, tackles and technician charges etc. all complete job ( b ) clear water pumping plant, dumri 2.13 cost towards supplying of hsc c / f pump capable for discharging 36 lps against total head 45 m ( make: kirloskar / crompton greese / jyoti / mather & platt / wpil ) coupled with sutibale size of squirell cage 3 phase induction motor ( make: kirloskar / crompton greaves / jyoti / abb / bhel ) operated on 415v, 50c / s, 1450rpm fitted on common channel fabricated base plate with required size of heavy duty , sluice valve 1no., n.r. valve 1no, pressure guage 1no., etc all complete. 2.14 cost towards dismantling of old 25hp c / f pump motor from base plate by gas cutter, cost for breaking of old existing foundation and removing of all garbage from pump house with all labour tools, tackles and technician cost. making new pcc foundation for above centrifugal pump set of casting of new pcc foundation of size 5 x 3 x 3 deep with s / f of 5 / 8 x 3 long foundation bolt 6nos, cement, sand, stone chips and plastering and punning of exposed surface etc all complete. 2.15 cost for supplying and laying of 3core 10 sq. mm, copper cable unarmoured, p.v.c insulated and p.v.c. sheathed 1100 v grade with isi mark from motor to starter in 2 length each for both motor. 2.16 cost for making and fitting of 6 dia common header with s / f of 6dia heavy duty gi pipe 6mtr, 6dia bend 2nos, 6 dia flange 10nos, rubber insertion 15kg. nut+bolt+washer 16kg, cutting of pipe in require length and duing complete welding etc all complete with all labour tools and tackles. 2.17 cost towards consumable materials such as grease, gland packing, insertion rubber, nut bolt, jute, logbook, , led bulb, broom etc. 2.18 cost for doing socketing of 3 core 10 sqmm cable, with supplyu and fiotting of copper lugs with all required insulating materials. 2.19 supplying 50 kva servo controlled voltage stabilizer suitable for input voltage 280 480 volts, output voltage of 400 volt±1%, 3 ph, 50 hz, with copper wound transformer ( oil cooled ) , unbalanced type, air cooled / oil cooled, three phase, frequency : 50 hz. speed of correction : 35v / second. regulation : + 1% from no load to full load.ambient temperature : 0 to 55 degree centigrade ( designed for indoor / outdoor continuous operation. operation : automatic cum manual, mcb for short circuit & over load protection, high volt low volt indicator & volt meter with all necessary switches and indicator the stabilizer shall function satisfactory even if incoming supply is unbalanced between phases within range of 10%. the stabilizer should be constructed in cubical box with bidirectional wheels for easy handling, necessary monitors and user’s controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and output voltage, auto / manual selector switch, raise / low push button etc. suitable capacity termination strips and bus bars for incoming and outgoing cable should be provided. all three phases shall independently monitored and corrected. make – powerline / servokon 2.20 supplying and fitting 200 amp changeover switch. make – havell’s / hpl 2.21 supplying and filling transformer oil. 2.22 supplying and laying 70 sq. mm x 3.5 core pvc sheathed & pvc insulated, 1.1 kv grade aluminium unarmoured cable. make – polycab / kei / universal / isi 2.23 cost of doing internal light wiring of pump house with 7 / 20 single core copper wire will all required making short point 1 no, medium point 4 nos, long point 1 no with supplying and fixing 4′x40 watt tube light 3 nos, 25 watt, led flood light with bracket 1 no etc all complete. 2.24 supplyng and fitting of 300 mm dia cidf sluice valve with nut bolts washer insersation rubber with all labour tool, tackles and technician charges etc. all complete job 2.25 cost towards supplying of hsc c / f pump capable for discharging 36 lps against total head 45 m ( make: kirloskar / crompton greese / jyoti / mather & platt / wpil ) coupled with sutibale size of squirell cage 3 phase induction motor ( make: kirloskar / crompton greaves / jyoti / abb / bhel ) operated on 415v, 50c / s, 1450rpm fitted on common channel fabricated base plate with required size of heavy duty , sluice valve 1no., n.r. valve 1no, pressure guage 1no., etc all complete. 3 supply installation testing and commissioning of pump sets, motor control panel, stabilizer and its allied works at bharkatta multi village rural water supply scheme at bharkatta ( a ) raw water pumping plant: 3.01 supplying all labour tools and tackles for taking out old and damaged vt pump sets from intake well with all accessories , demolition of mounting channel for installation of new vertical turbine pump sets. 3.02 supplying, installation, testing and commissioning of electrically driven water lubricated vertical turbine pump sets kirloskar / wpil / mather & plate / jyoti having discharge capacity of raw water 114 m3 / h against a total head of 39 meter, in all concern coupled with vertical hollow shaft sq. cage induction motor make ( kirloskar / crompton / jyoti / abb ) , operated on 415 + 10% volts, 50hz, 1460 rpm ( 10% above the capacity of pump ) with sole plate, discharge head, m.s. d.f. column assembly random length of 5 ft, total 45 ft. s.s. line shaft, s.s, socket, spider bearing with rubber cut less bush, cidf sluice valve 1 no, cidf nr valve 1 no, pressure gauge 1 no ets all complete. 3.03 supplying all labour tools and tackles for braking old pcc and making new pcc foundation 2′x2′x1′ with all materials such as cement , sand, stone chips, foundation bolt etc all complete including fixing of sole plate for installation of new vt pump sets 3.04 providing floor / wall mounted cubical l.t power control panel fabricated with ms sheet and painted, dust and vermin proof, proper ventilated consisting of: proper distribution 200 amp copper bus bar 4 pole 1 set micro processor base tpn mccb 200 amp l&t / siemens make with earth fault relay for incoming feeder – 1no. mccb 100 amp tp l&t / siemens / bch / schneider make for outgoing feeder 2 nos ( 1no for each pump sets ) , 32a dp mcb for lighting 1 no. suitable size of fully automatic star delta starter l&t / bch / schnider / havells make 2nos. ( 1no for each pump sets ) 0 500 v voltmeter with selector switch 1 set ct operated ampere meter ( 0 120a ) with ct 2 sets, phase indicating neon lamp 6nos, s.p.p. 2nos doing internal wiring with proper gauge of copper wire etc all complete job and testing on load. 3.05 cost towards supplying and laying of 16mm2 x , 3 core pvc insulated and pvc sheathed , 1.1 kv grade unarmored copper cable of reputed make and isi marked doing connection from panel to both motor. jsor dwsd 2021 3.06 cost towards making cable mouth for 16mm2 3.07 cost of doing internal light wiring of pump house with 7 / 18 single core copper wire will all required making short point 1 no, medium point 4 nos, long point 1 no with supplying and fixing 4′x40 watt tube light 3 nos, 25 watt, led flood light with bracket 1 no etc all complete. 3.08 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry with cover plate having locking arrangements and watering pipe 2.7 meter long etc with charcoal / coke and salt as required for chemical earthing. 3.09 supplying and laying of 8 swg copper / gi wire for making earthing connection in two from earthing station to panel to motor . 3.10 supplying and fixing 3 ton capacity triple gear chain pulley block with 6 meter lifting chain of reputed make and isi marked. 3.11 supplying 50 kva servo controlled voltage stabilizer suitable for input voltage 240 480 volts, output voltage of 400 volt±1%, 3 ph, 50 hz, with copper wound transformer ( oil cooled ) , unbalanced type, oil cooled, three phase, frequency : 50 hz. speed of correction : 35v / second. regulation : + 1% from no load to full load.ambient temperature : 0 to 55 degree centigrade ( designed for indoor / outdoor continuous operation. operation : automatic cum manual, mcb for short circuit & over load protection, high volt low volt indicator & volt meter with all necessary switches and indicator the stabilizer shall function satisfactory even if incoming supply is unbalanced between phases within range of 10%. the stabilizer should be constructed in cubical box with bidirectional wheels for easy handling, necessary monitors and user’s controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and output voltage, auto / manual selector switch, raise / low push button etc. suitable capacity termination strips and bus bars for incoming and outgoing cable should be provided. all three phases shall independently monitored and corrected. make – powerline / servokon. 3.12 supplying and laying 50 sq. mm x 3.5 core pvc sheathed & pvc insulated, 1.1 kv grade aluminium unarmoured cable. make – polycab / kei / universal / isi 3.13 supplying and fitting 200 amp changeover switch. make – havell’s / hpl 3.14 supplying and filling transformer oil. 3.15 cost for supplying and laying delivery pipe line with s / f of 4dia heavy duty gi pipe 5, flange 5nos., rubber insertion 5kg, nut bolt 8kg, with cutting of pipe in required size and welding with all labour tools and tackles. 3.16 cost towards supplying and laying of 16mm2 x , 3 core pvc insulated and pvc sheathed , 1.1 kv grade unarmored copper cable of reputed make and isi marked doing connection from panel to both motor. jsor dwsd 2021 ( b ) clear water pumping plant: 3.17 supplying all labour tools and tackles for taking out old and damaged c / f pump set with all accessories , demolition of foundation for installation of new hsc centrifugal pump sets. 3.18 supplying, installation, testing and commissioning of electrically driven horizontal split casing centrifugal pump set make ( kirloskar / wpil / mather & plate / jyoti ) having discharge capacity of clear water 114 m3 / h against total head of 37 meter coupled with tefc sq. cage induction motor make ( kriloskar / crompton / jyoti / abb ) operated on 415 + 10% volts, 50hz, 1470 rpm mounted on common m.s. fabricated base plate with cidf sluice valve 1 no, cidf nr valve 1 no, foot valve 1 no, pressure gauge 1 no, tyre coupling 1 set etc all complete. 3.19 supplying all labour tools and tackles forbreaking old pcc and making new pcc foundtiaon 1nos, of size 6′x3x3′ with all materials such as cement , sand, stone chips, foundation bolt 6nos etc all complete and plastering and punning over exposed surface. 3.20 cost for supply and laying of suction pipe line with s / f of 6 or suitable dia heavy duty g.i. pipe 6m, bend 2 nos., flange 6 nos., nut, bolt, washer 10kg, rubber insertion etc, cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges.with cp & ohc. ( rate after deducting the scrap materials. ) 3.21 providing floor / wall mounted cubical l.t power control panel fabricated with ms sheet and painted, dust and vermin proof, proper ventilated consisting of: proper distribution 200 amp copper bus bar 4 pole 1 set micro processor base tpn mccb 200 amp l&t / siemens make with earth fault relay for incoming feeder – 1no. mccb 100 amp tp l&t / siemens / bch / schneider make for outgoing feeder 2 nos ( 1no for each pump sets ) , 32a dp mcb for lighting 1 no. suitable size of fully automatic star delta starter l&t / bch / schnider / havells make 2 nos. ( 1no for each pump sets ) 0 500 v voltmeter with selector switch 1 set ct operated ampere meter ( 0 120a ) with ct 2 sets, phase indicating neon lamp 6nos s.p.p. 2nos doing internal wiring with proper gauge of copper wire etc all complete job and testing on load. 3.22 cost towards supplying and laying of 10 mm2 , 3 core pvc insulated and pvc sheathed, 1.1 kv grade unarmered copper cable of reputed make and isi marked for doing connection from panel to motor. jsor dwsd 2021 3.23 cost towards making cable mouth for 10mm2 3.24 cost of doing internal light wiring of pump house with 7 / 20 single core copper wire will all required making short point 1 no, medium point 4 nos, long point 1 no with supplying and fixing 4′x40 watt tube light 3 nos, 25 watt, led flood light with bracket 1 no etc all complete. 3.25 cost for doing chemical earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry with cover plate having locking arrangements and watering pipe 2.7 meter long etc with charcoal / coke and salt as required for chemical earthing. 3.26 supplying and laying of 8 swg copper / gi wire for making earthing connection in to from earthing station to panel to motor . 3.27 cost for supplying and laying delivery pipe line with s / f of 4dia heavy duty gi pipe 3, flange 5nos., rubber insertion 5kg, nut bolt 8kg, t 01 no. with cutting of pipe in required size and welding with all labour tools and tackles. 3.28 supplying and fitting 200 amp changeover switch. make – havell’s / hpl...

Bharat Coking Coal Limited - Jharkhand

37690363 repairing of centralizer bushing oval bore and repairing centralizer bushing base plate and bracket and drill rod wrench and fitting in idm 30 drill dr242 at nichitpur ocp, sijua area...

Central Coalfields Limited - Jharkhand

37643138 repairing, cutting, welding, straightening of base plate of 55 kw motor installed at check post colony under urimari ocp. repairing, cutting, welding, straightening of base plate of 55 kw motor installed at check post colony under urimari ocp....

Bharat Coking Coal Limited - Jharkhand

37583662 fabrication of base plate and pump installation at jamunia water treatment plant and harina boosting station and other associated works under jwtp, block ii area...

South Eastern Railways - Jharkhand

37564748 auction sale of un serviceable and released scrap materials srl no [1] lot no & ledger ref no sse/cs/2022 23/19 description fixed plunger (pe) qty 80 nos., fixed plunger (ce) qty 60 nos., mobile plunger qty 10 nos., qvrf base plates, speedometer base plates, release nuts and bolts, vcb union & socket, hom valve & accessories, operating cam assly. vcb & et2 rod. arno starting resistance r118(iron)qty 09 nos., servo motor for reverser (iron) qty 10 nos.,bp,fp,mr & mu cock qty 21 nos.,? drain cock qty 63 nos., ? isolating cock qty 58 nos., 1.25 nrv qty 16 nos.,reducing valve qty 05nos., 1isolating cock qty 11 nos., 1.25 isolating cock qty 03 nos., d 24 b valve(escorts) qty 02 nos., compressor cylinder(rr20100 lp 66 nos., rr20100 hp qty 33 nos., mn1000 lp qty 60 nos., mn1000 hp qty 30 nos.,), crank shaft (rr20100 qty 18 nos., mn1000 qty 03 nos.), fly end cover (rr20100 qty 18 nos., mn1000 qty 03 nos.), free end cover (rr20100 qty 20 nos., mn1000 qty 04 nos.), hub (cp side) (rr20100 qty 20 nos., mn1000 qty 08 nos.), hub (motor side)(mn1000 qty 20 nos.), main spring (pantograph) qty 20 nos., servo motor qty 10 nos., misc:(liners, pins, bushes, link, friction arm fasteners, brake equalizer plate, washers, cotter pins, turnion, clevis, arm spring, adjusting screws, damper bracket & tie bar etc.). approx total fe wt 6147.14 kg....

Central Coalfields Limited - Jharkhand

37551243 dismantling of pump set from base plate, pipeline and complete repairing and overhauling of 02 nos of 6up4 centrifugal pump, 100 mtr. head, 1000 gpm along with spare parts n commissioning the pump on base plate with pipeline and alignment with motor...

Central Coalfields Limited - Jharkhand

37549936 tender for dismantling of pump set from base plate, pipeline and complete repairing and overhauling of 02 nos of 6up4 centrifugal pump, 100 mtr. head, 1000 gpm along with spare parts & commissioning the pump on base plate with pipeline and alignment with motor & level setting with spirit level in respect of iwsp, b&k a...

Central Coalfields Limited - Jharkhand

37291887 fabrication of base plate structure and making of pipe bends of 6 inch, 8 inch and 10 inch dia for operation of 2000 gpm and 1300 gpm pumps of kdh ocp, nk area...

Municipal Corporation - Jharkhand

37284553 tender for supply of 12 mtr high mast in one section construction $355 grade as per bs en 10 025 top dia 100m m, bottom dia 360 mm, plate thickness 3mm, 12 side polygon, galvanisation as per bs en iso 1461, ba se plate dia 520mm, base plate thickness 25mm, gi single spike (with 14.95% cp& overhead charne). and for 12 mtr. high mast: itc of the high mast and light fixture with the help of suitable tools and plants, wiring of luminaries with all wiring material like pvc insulated pvc sheathed flexible cable of suitable copper conductor lugs mcb and all labours and construction of shallow foundation with m25 grade concrete for the high rasl considering safe soil bearing capacity of 10 t/mtrs sq for 12 m high mast. (with 14.95% cp& overhead charge, s.i.t.c of flowing rating led flood lighting lumarine with pressure die cast housing and toughened glass cover (ip66 protection)in existing pole/plpo for supply voltage 100 270v ac 50hz. luminaire shall be confirm to is:10322 part 5/section sand shall be complete with all necessary accessories is required. (150/1 60w led flood light ) 10 sq. mm 4 core xipe inducted pve heavy duty armoured cable (with 14.95% cp& overhead charge)...

Jharkhand State Electricity Board - Jharkhand

37102498 tender for electric line materials under adphead for f.y. 2022 23 electrical line materials , lt stay set complete (1700x16 mm) with stay wire 7/12 swg , 11 kv lightening arrestor s/stn.type 9kv 10ka heavy duty , stay set complete for dss with wire , 11 kv earthing (chemical) with earthing pipe 20 mm 1.2 mtrs. long , 11 kv h.g. fuse set , stone base plate...

Health Medical Education And Family Welfare Department - Jharkhand

37078658 bids are invited for supply of items light cure 6, endomotor 1, rvg machine 1, forcep adult 3, forcep kid 3, elevator kit 3, surgical scissor curved &stri 6, needle holder 6, pmt 6, conservative hand intrumen 6, spoon execavator 6, filling instrument 6, glass slab 6, condencesor 6, micromotor handpiece both 6, crown remover 6, periodonttal probe 6, manual scaler set 6, ultrasonic scaler with tips 6, wire cutter 1, orthodontic plier set 1, dental autoclave 12l 1, impression traydentulous1, 2 6, impression tray e dentulous1 6, autoclave machine frontl oa 1, composite kit 6, shade guide 6, flowable composite 6, gic filling materails ( lightcu 3, gic filling material ( self cure 6, zinic oxide powder 6, euzenol 110ml 6, zinc phosphate cement withli 6, zinc polycarboxylate cement 6, zirconia crown cement 6, formocresol 6, calcium gel 1, mta gel 1, gp 1, gp solvent 1, devitalizer 1, alginate 1, green stone 1, pop 1, self cure acrylic resin 1, impression compound 1, green stick 1, base plate 1, wax sheet 1, x ray film 6, suction tips 6, k files 6, h files 6, bar broch 6, crown cutting bur 6, niti archwire 1set 8 pkts 6, ortho composite 1, elastic band ortho 1, bracket 1, endo files 1, elastic modules 1, elastic e chen 1, molar tube 1, boiler sterilizer 2...

Drinking Water And Sanitation Department - Jharkhand

37073965 tender for replacement of old & damaged foundation & base plate of c/f pump, replacement of al service cable, supplying & installation of 3 hp mono block back wash pump set with dol starter, cable, s/f of sluice valves for filter unit, blower pump dol starter etc. and allied work at clear water p/plantjhajhapara. repairing and servicing of 100 amp motor control panel board, s/f 150mm dia. nr & sluice valves etc. works at intake well jhajhapara of ranibahal/ maheshbathan group of village rural pipe water supply scheme under d. w. & s. mechanical division dumka....

Drinking Water And Sanitation Department - Jharkhand

36990263 renovation with supply installation testing and commissioning of pump set, overhauling of motor control panel and its allied work at rural water supply scheme, chirkunda kumardhubi, maithan ( old scheme ) , raw water pumping plant: , cost towards supplying, installation, testing and commissioning of electrically drivenhorizontal split casing centrifugalpump set make ( kirloskar / wpil / mather & plate / jyoti ) coupled with tefc sq. cage induction motor make ( kirloskar / crompton / jyoti / abb ) operated on 415 + 10% volts, 50hz, 1470 rpm mounted on common m.s. fabricated base plate with suitable size of cidf sluice valve 1 no, cidf nr valve 1 no, foot valve 1 no, pressure gauge 1 no, tyre coupling 1 no etc all complete.head 50 mdischarge 275 m3 / h ( hp 100 approx ) , supplying all labour tools and tackles for taking out old and damaged c / f pump set with all accessories , demolition of foundationfor installation of new hsc centrifugal pump sets. , supplying all labour tools and tackles for making new pcc foundtiaon of size 6 x 3 x 3 with all materials such as cement , sand, stone chips, foundation bolt 6nos etc all complete and plastering and punning over exposed surface with all labour, tools, tackle and technician charges. , cost towards supply and laying of suction pipe line with s / f of 10 dia g.i. pipe 2 meter, 10 dia g.i. bend 1 no., 10dia g.i. flange 4nos., rubber insertion 10kg, nut, bolt & washer 10kg etc and cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges.with cp & ohc. ( rate after deducting the scrap materials. ) , cost towards supply and laying of 8dia delivery line with s / f of8 dia heavy duty g.i. pipe 1 meter, 8dia g.i. flange 4nos., rubber insertion 10kg, nut, bolt & washer 10kg etc and cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges.with cp & ohc. ( rate after deducting the scrap materials. ) , cost towards overhauling of motor control panelwith all labour tool, tackles and technician charges for disconnecting the electric line & opening of electric wireconnection inside panel. cleaning, checking, rectifying of faults with supply and fitting of damaged spares such as bus bar 1set, ampere meter 1no., voltmeter 1no., indicating lamps 3 no. etc, dressingof motor cables with new lugs, crimping works etc all complete and testing on full load. ( rate after deducting the cost of scrap materials ) . , cost towards overhauling of f.a.s.d. starter panelwith all labour tool, tackles and technician charges for disconnecting the electric line & opening of electric wireconnection inside panel. cleaning, checking, rectifying of faults with supply and fitting of contacter set ( ml 4 1no and ml 6 1no. ) l&t make or equivalent capacity of isi marked reputed make, over load relay 1no., timer 1no., spp 1no. etc all complete work, dressingand doing fresh electric connection with new wire and connector inside panel, rechecking of all connections and testing on full load. ( rate after deducting the cost of scrap materials ) . , cost towards supplying and fitting of 30w led flood light, with bracket, copper wire, on off switch etc with all accessories including all labour tools , tackles and technician charges., with cp & ohc, ( rate after deducting the scrap materials. ) . make havells / syska / mescab / polycab / phillips , providing chipping work on the roof surface of raw water pump house, removing of all garbage to outside with lead of 50 m , providing and cleaning of concrete surface to remove dust and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. on identification of seepage, cement grouting to be done with non shrink expanding admixture of sika lndia pvt.ltd. / myk schomberg / dr fixit / fosroc or equivalent. [ size 12.5 m x 6.7 m = 83.75 m2 ] , cost towards providing pcc m 200 in nominal mix of 1:1.5:3on roof with approved quality of stone chips 12mm to 6mm size graded andclean course sand of fm 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of e / i. [ jsor bcd 2018 5.3.2.1 ] [ size 12.5 m x 6.7 m x 0.05 m= 4.19 m3 ] , providing 12 mm thick water proof cement plaster ( 1:3 ) with clean coarse sand of f m. 1.5 with integral water proofing compound liquid @125 ml per bag cement including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of e / i.brand fosroc conplast x421 lc, sika plastocrate plus, dr fixit pidiproof lw+, myk proof wp 10 or equivalent. [ size 12.5 m x 6.7 m = 83.75 m2 ] , dismantling old plaster and pointing in cement or lime and taking out joints to 15mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of e / i. inside and outside of pump house, approx=310 m2 , providing 6mm thick cement plaster ( 1:4 ) in ceiling and wall of building with clean coarse sand of f.m. 15 including screening, curingwith all leads and liftsof water, scaffoldingtaxes and royalty all complete as per buildingspecification and direction of e / i. , providing two coats ofsnowcemofapproved shade and make overold surfaceincluding washing cleaning and preparing the walls , scaffolding, curing and taxes all completeas per building specification and direction of e / i. , providing 2 ( two ) coats of synthetic enamel paint of approved shade & make oversteel surface including cleaning the surface, removing dirt, scales, smokes, grease, scaffolding & taxes all complete as per building specification and direction of e / i. for door, window, common header pipe, valves etc. approx 30m2 , clear water pumping plant: , cost towards supplying and fitting of complete rotating assembly for 50hp centrifugal pump, having head 65m discharge 113.5 m3 / hr make kirloskar with ss pump shaft, c.i. impeller, ss sleeve, bushes, gland tightener 2nos., ball bearing etc all complete with machining as per size and sample, assembling and fitting on the base plate, with all labour tools tackles and technician charges. ( rate after deducting the scrap materials. ) , cost towards supplying and fitting of complete rotating assembly for 50hp centrifugal pump, having head 70 m discharge 114 m3 / hr make wpil with ss pump shaft, c.i. impeller, ss sleeve, bushes, gland tightener 2nos., ball bearing etc all complete with machining as per size and sample, assembling and fitting on the base plate, with all labour tools tackles and technician charges. ( rate after deducting the scrap materials. ) , cost towards supplying and fitting of complete rotating assembly for 60hp centrifugal pump, having head 70 m discharge 160 m3 / hr make mather & platt with ss pump shaft, c.i. impeller, ss sleeve, bushes, gland tightener 2nos., ball bearing etc all complete with machining as per size and sample, assembling and fitting on the base plate, with all labour tools tackles and technician charges. ( rate after deducting the scrap materials. ) , cost towards supply and fitting of 4dia coupling set for 50hp pump set with nut bolt etc all complete. , cost towards supply and fitting of 4diacoupling set for 60hp pump set with nut bolt etc all complete. , supplying, fitting, installation, erecting and commissionning ofapproved make h.t. outdoor type gang operated air break triple pole switch, suitable for 11kv line, rotating type, with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps including cp, ohc, transportation, labour charges etc. ( rate after deducting the scrap materials. ) , cost towards supplying and fitting of 250a mccb, 3phase, 50hz, isi marked, with all labour tools , tackles and technician charges. with cp & ohc, ( rate after deducting the scrap materials. ) . make l&t / abb / hpl / cg , cost towards supplying and fitting of 160a mccb, 3phase, 50hz, isi marked, with all labour tools , tackles and technician charges. with cp & ohc, ( rate after deducting the scrap materials. ) . make l&t / abb / hpl / cg , cost towards overhauling of motor control panel cum 3 nos. of f.a.s.d. starter panelwith all labour tool, tackles and technician charges for disconnecting the electric line & opening of electric wireconnection inside panel. cleaning, checking, rectifying of faults of 3nos. f.a.s.d. starter with supply and fitting of contacter set ( mnx95 1no and mnx50 1no. ) l&t make or equivalent capacity of isi marked reputed make, over load relay 1no., timer 1no., spp 1no. etc all complete work eachfor 3 nos. fasd starter, dressingand doing fresh electric connection with new wire and connector inside panel, rechecking of all connections and testing on full load. ( rate after deducting the cost of scrap materials ) . for mcp no. 1. , cost towards overhauling of motor control panel cum 2 nos. of f.a.s.d. starter panelwith all labour tool, tackles and technician charges for disconnecting the electric line & opening of electric wireconnection inside panel. cleaning, checking, rectifying of faults of 2nos. f.a.s.d. starter with supply and fitting of contacter set ( mnx70 1no and mnx50 1no. ) l&t make or equivalent capacity of isi marked reputed make, over load relay 1no., timer 1no., spp 1no. etc all complete work each for 2 nos. fasd starter, dressingand doing fresh electric connection with new wire and connector inside panel, rechecking of all connections and testing on full load. ( rate after deducting the cost of scrap materials ) . for mcp no. 2. , cost towards supplying and fitting of 30w led flood light, with bracket, copper wire, on off switch etc with all accessories including all labour tools , tackles and technician charges., with cp & ohc, ( rate after deducting the scrap materials. ) . make havells / syska / mescab / polycab / phillips , providing chipping work on the roof surface of clear water pump house, removing of all garbage to outside with lead of 50 m , providing and cleaning of concrete surface to remove dust and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. on identification of seepage, cement grouting to be done with non shrink expanding admixture of sika lndia pvt.ltd. / myk schomberg / dr fixit / fosroc or equivalent. , cost towards providing pcc m 200 in nominal mix of 1:1.5:3on roof with approved quality of stone chips 12mm to 6mm size graded andclean course sand of fm 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of e / i. , providing 12 mm thick water proof cement plaster ( 1:3 ) with clean coarse sand of f m. 1.5 with integral water proofing compound liquid @125 ml per bag cement including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of e / i.brand fosroc conplast x421 lc, sika plastocrate plus, dr fixit pidiproof lw+, myk proof wp 10 or equivalent , dismantling old plaster and pointing in cement or lime and taking out joints to 15mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of e / i.inside and outside of pump house, , providing 6mm thick cement plaster ( 1:4 ) in ceiling and wall of building with clean coarse sand of f.m. 15 including screening, curingwith all leads and liftsof water, scaffoldingtaxes and royalty all complete as per buildingspecification and direction of e / i. , providing two coats ofsnowcemofapproved shade and make overold surfaceincluding washing cleaning and preparing the walls , scaffolding, curing and taxes all completeas per building specification and direction of e / i. , providing 2 ( two ) coats of synthetic enamel paint of approved shade & make oversteel surface including cleaning the surface, removing dirt, scales, smokes, grease, scaffolding & taxes all complete as per building specification and direction of e / i. for door, window, common header pipe, valves etc....

Drinking Water And Sanitation Department - Jharkhand

36990246 renovation of rural water supply scheme at khudgaddha , raw water pumping plant: , supplying all labor tools and tackles for taking out old and damaged vt pump sets from intake well with all accessories , demolition of mounting channel for installation of new vertical turbine pump sets. , supplying, installation, testing and commissioning of electrically driven vertical turbine pump sets kirloskar / wpil / mather & plate / jyoti having discharge capacity of raw water127 m3 / hragainsttotal head of 65 meters, coupled with vertical hollow shaft sq. cage induction motor make ( kirloskar / crompton / jyoti ) operated on 415 + 10% volts, 50hz, 1470 rpm with sole plate, discharge head, m.s. d.f. column assembly random length of 5 ft, total 40 ft. s.s. line shaft, s.s, socket, spider bearing with rubber cut less bush, cidf sluice valve 1 no, cidf nr valve 1 no, pressure gauge 1 no ets all complete. note: motor capacity should have 10% above of the pump. , supplying all labor tools and tackles for making pcc foundation 3x3x1 with all materials such as cement , sand, stone chips, foundation bolt, reducer as per sample, including fixing of sole plate for installation of new vt pump sets and jointing the existing delivery pipe line etc all complete job. , cost towards supplying andlaying of 16mm2 x3 core pvc insulated and pvc sheathed , 1.1 kv grade unarmored copper cable of reputed make and isi marked doing connection from panel to both motor. , cost towards making cable mouth for ( a ) 95 mm2 16 nos , ( b ) 16mm2 24nos , cost of doing internal light wiring of pump house with 7 / 18 single core copper wire will all required making short point 1 no, medium point 2 nos, long point 1 no with supplying and fixing 4x40 watt tube light 2 nos, 25 watt, led flood light with bracket 1 no etc all complete , earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry with cover plate having locking arrangements and watering pipe 2.7 meter long etc with charcoal / coke and salt as required for chemical earthing. 02 nos. for pump set and 02 nos. for transformer ( one body earthing and one neutral earthing ) , cost for supply and fitting of 200amp. tpn main switch / switch disconnectorand doing all line connection. , supplying and laying of 8 swg copper wire for making earthing connection in to from earthing station to panel to motor . , cost towards supplying andlaying of 95 mm2 , 3 ½ core pvc insulated and pvc sheathed , 1.1 kv grade armeredaluminum cable of reputed make and isi marked doing connection from main switch to stabilizer andstabilizer to panel . , providing floor / wall mounted cubical l.t power control panel fabricated with ms sheet and painted, dust and vermin proof, proper ventilated, consisting of – ( a ) proper distribution 200 amp copper bus bar 4 pole 1 set ( b ) tpn mccb 250 amp l&t / siemens make withearth faultrelay for incoming feeder – 1no. ( c ) mccb 100 amp tp l&t / siemens make for outgoing feeder 2 nos. ( 1no for each pump sets ) ( d ) suitable size of fully automatic star delta starter l & t / bch / schnider make 2 nos. ( e ) with suitable kvr ( capacitor ) for improving power factor ( f ) 0 500 v voltmeter with selector switch 2nosct operated ampere meter ( 0 200a ) with ct 2 sets with selector switch 2nos, phase indicating neon lamp 6nos, s.p.p. 2nos doing internal wiring with proper gauge of copper wireetc all complete job and testing on load. , costtowards repairing and complete overhauling of 125 kva servo controlled automatic voltage stabilizer, disconnectingall electric line and joints and checking defects and removing them by s / f of damaged spare parts such as 10 kg operating motor 02 nos , connecting jack 03 nos, r c unite – 02 nos , variac auto transformer 01 no, control card 03 nos and doing internalwiring in propergauge of wire and reassembling the same and test on full load , including tools tackles and labor charges. , supply and top up transformer oil of reputed make , clear water pumping plant: , supplying all labour tools and tackles for taking out old and damaged c / f pump set with all accessories , demolition of foundationfor installation of new hsc centrifugal pump sets. , supplying, installation, testing and commissioning of electrically drivenhorizontal split casing centrifugalpump set make ( kirloskar / wpil / mather& plate / jyoti ) having discharge capacity of clear water33.5 lps againsttotal head of 35 meter coupled with tefc sq. cage induction motor make ( kriloskar / crompton / jyoti ) operated on 415 + 10% volts, 50hz, 1470 rpm mounted on common m.s. fabricated base plate with cidf sluice valve 1 no, cidf nr valve 1 no, foot valve 1 no, pressure gauge 1 no, tire coupling 1 no etc all complete. , supplying all labour tools and tackles for making pcc foundtiaon 1 no. of size 4x3’x3 with all materials such as cement , sand, stone chips, foundation bolt 6nos, reducer and plastering and punning over exposed surface and jointing the existing delivery and suctionpipeline etc all complete job. , providing floor / wall mounted cubical l.t power control panel fabricated with ms sheet and painted, dust and vermin proof, proper ventilated, consisting of – ( a ) proper distribution 200 amp copper bus bar 4 pole 1 set ( b ) tpn mccb 250 amp l&t / siemens make withearth faultrelay for incoming feeder – 1no. ( c ) mccb 100 amp tp l&t / siemens make for outgoing feeder 2 nos. ( 1no for each pump sets ) ( d ) suitable size of fully automatic star delta starter l & t / bch / schnider make 2 nos. ( e ) with suitable kvr ( capacitor ) for improving power factor ( f ) 0 500 v voltmeter with selector switch 2nosct operated ampere meter ( 0 200a ) with ct 2 sets with selector switch 2nos, phase indicating neon lamp 6nos, s.p.p. 2nos doing internal wiring with proper gauge of copper wireetc all complete job and testing on load. , cost towards supplying andlaying of 50 mm2 x , 3 ½ core pvc insulated and pvc sheathed , 1.1 kv grade armored aluminum cable of reputed make and isi marked doing connection from pole to panel board . , cost towards supplying and laying of 10 mm2 , 3 core pvc insulated and pvc sheathed, 1.1 kv grade unarmored copper cable of reputed make and isi marked for doing connection from panel to motor.jsor m1062 , cost towards making cable mouth for ( a ) 50 mm2 16nos , ( b ) 10mm2 24nos , cost of doing internal light wiring of pump house with 7 / 18 single core copper wire will all required making short point 1 no, medium point 2nos, long point 1 no with supplying and fixing 4x40 watt tube light 1 nos, 25 watt, led flood light with bracket 1 no etc including materials and labor chargesall compelte 1 job. , earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonary with cover plate having locking arrangements and watering pipe 2.7 meter long etc with charcoal / coke and salt as required for chemical earthing. 02 nos. for pump set and 02 nos. for transformer ( one body earthing and one neutral earthing ) , supplying and laying of 8 swg copper wire for making earthing connection in to from earthing station to panel to motor. , cost for supply and fitting of 200 amp. tpn main switch / switch disconnector and doing all line connection. , costtowards repairing and complete overhauling of 60 kva servo controlled automatic voltage stabilizer, disconnectingall electric line and joints and checking defects and removing them by s / f of damaged spare parts such as 10 kg operating motor 02 nos , carbon brush 03 nos, main transformer 01 no , control transformer 01 no and doing internalwiring in propergauge of wire and reassembling the same and test on full load , including tools tackles and labor charges. , supply and top up transformer oil of reputed make...

Drinking Water And Sanitation Department - Jharkhand

36990237 renovation of rural water supply scheme at bandh basti kathara , raw water pumping plant: , supplying all labor tools and tackles for taking out old and damaged vt pump sets from intake well with all accessories , demolition of mounting channel for installation of new vertical turbine pump sets. , supplying, installation, testing and commissioning of electrically driven vertical turbine pump sets kirloskar / wpil/ mather & plate/jyoti having discharge capacity of raw water60 m3/hragainsttotal head of25 meters, coupled with vertical hollow shaft sq. cage induction motor make (kirloskar / crompton/ jyoti) operated on 415 + 10% volts, 50hz, 1470 rpm with sole plate, discharge head, m.s. d.f. column assembly random length of 5 ft, total 40 ft. s.s. line shaft, s.s, socket, spider bearing with rubber cut less bush, cidf sluice valve 1 no,cidf nr valve 1 no, pressure gauge 1 no ets all complete. note: motor capacity should have 10% above of the pump. , supplying all labor tools and tackles for making pcc foundation 3x3x1 with all materials such as cement , sand, stone chips, foundation bolt, reducer as per sample, including fixing of sole plate for installation of new vt pump sets and jointing the existing delivery pipe line etc all complete job. , cost towards supplying andlaying of 06 mm2 x3 core pvc insulated and pvc sheathed ,1.1 kv grade unarmored copper cable of reputed make and isi marked doing connection from panel to both motor. , cost towards making cable mouth for (a) 50 mm2 16 nos , (b) 06 mm2 24nos , cost of doing internal light wiring of pump house with 7/18 single core copper wire will all required making short point 1 no, medium point 2 nos, long point 1 no with supplying and fixing 4x40 watt tube light 2 nos, 25 watt, led flood light with bracket 1 no etc all complete , earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry with cover plate having locking arrangements and watering pipe 2.7 meter long etc with charcoal/ coke and salt as required for chemical earthing. 02 nos. for pump set and 02 nos. for transformer (one body earthing and one neutral earthing ) , cost for supply and fitting of 200 amp. tpn main switch/ switch disconnectorand doing all line connection. , supplying and laying of 8 swg copper wire for making earthing connection in to from earthing station to panel to motor . , cost towards supplying andlaying of 50 mm2 , 3 ½ core pvc insulated and pvc sheathed ,1.1 kv grade armeredaluminum cable of reputed make and isi marked doing connection from main switch to stabilizer andstabilizer to panel . , providing floor/wall mounted cubical l.t power control panel fabricated with ms sheet and painted, dust and vermin proof, proper ventilated, consisting of – (a) proper distribution 200 amp copper bus bar 4 pole 1 set (b) tpn mccb 100 amp l&t/ siemens make withearth faultrelay for incoming feeder – 1no. (c) mccb 100 amp tp l&t /siemens make for outgoing feeder 2 nos.(1no for each pump sets) (d) suitable size of fully automatic star delta starter l & t/ bch/schnider make 2 nos., (e) with suitable kvr (capacitor) for improving power factor (f) 0 500 v voltmeter with selector switch 2nosct operated ampere meter (0 200a) with ct 2 sets with selector switch 2nos, phase indicating neon lamp 6nos, s.p.p. 2nos doing internal wiring with proper gauge of copper wireetc all complete job and testing on load. , providing, erecting 30 kva servo controlled automatic voltage stabilizer suitable for output voltage 415v+/ 1% and input 280 450 v, 3 phase ,50 hz , with copper wound transformer (oil cooled ) as mentioned below. the stabilizer shall function satisfactorily even if incoming supply is unbalanced between the phases within range of 10%. the stabilizer should be constructed in cubical box ,with by bidirectional wheels for easy handlingnecessarymonitors and users controls on front panel such as indication , alarm ,voltmeterand selector switch formeasuring input and output voltage , auto/manual selector switch , raise/low push buttons etc.suitable capacity termination strips and bush bars for incoming & outgoing cable should be provided. all three phases shall be independently monitored and corrected. following protections and indications shall be incorporated as per is :9815 (a) over voltage /under voltage (b) single phasing (c) cut off contractor with electronicoutput sensing unite suitable change over switch and earthing. , supply and top up transformer oil of reputed make , clear water pumping plant: , supplying all labour tools and tackles for taking out old and damaged c/f pump set with all accessories , demolition of foundationfor installation of new hsc centrifugal pump sets. , supplying, installation, testing and commissioning of electrically drivenhorizontal split casing centrifugalpump set make(kirloskar/ wpil/ mather& plate/jyoti ) having discharge capacity of clear water50 m3/hragainsttotal head of 45 meter coupled with tefc sq. cage induction motor make (kriloskar/ crompton /jyoti) operated on 415 + 10% volts, 50hz, 1470 rpm mounted on common m.s. fabricated base plate with cidf sluice valve 1 no,cidf nr valve 1 no, foot valve 1 no, pressure gauge 1 no, tire coupling 1 no etc all complete. , supplying all labour tools and tackles for making pcc foundtiaon 1nos, of size 4x3’x3 with all materials such as cement , sand, stone chips, foundation bolt 6nos,reducer and plastering and punning over exposed surface and jointing the existing delivery and suctionpipeline etc all complete job. , providing floor/wall mounted cubical l.t power control panel fabricated with ms sheet and painted, dust and vermin proof, proper ventilated, consisting of – (a) proper distribution 200 amp copper bus bar 4 pole 1 set (b)tpn mccb 200 amp l&t/ siemens make withearth faultrelay for incoming feeder – 1no. (c) mccb 100 amp tp l&t /siemens make for outgoing feeder 2 nos.(1no for each pump sets) (d) suitable size of fully automatic star delta starter l & t/ bch/schnider make 2 nos. (e) with suitable kvr (capacitor) for improving power factor (f) 0 500 v voltmeter with selector switch 2nosct operated ampere meter (0 200a) with ct 2 sets with selector switch 2nos, phase indicating neon lamp 6nos, s.p.p. 2nos doing internal wiring with proper gauge of copper wireetc all complete job and testing on load. , cost towards supplying andlaying of 70 mm2 x , 3 ½ core pvc insulated and pvc sheathed ,1.1 kv grade armored aluminum cable of reputed make and isi marked doing connection from main switch to stabilizer and stabilizer to panel board . , cost towards supplying and laying of 10 mm2 , 3 core pvc insulated and pvc sheathed,1.1 kv grade unarmored copper cable of reputed make and isi marked for doing connection from panel to motor. , cost towards making cable mouth for (a) 70 mm2 16nos , (b) 10mm2 24 nos , cost of doing internal light wiring of pump house with 7/18 single core copper wire will all required making short point 1 no, medium point 2nos, long point 1 no with supplying and fixing 4x40 watt tube light 1 nos, 25 watt, led flood light with bracket 1 no etc including materials and labor chargesall compelte 1 job. , earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonary with cover plate having locking arrangements and watering pipe 2.7 meter long etc with charcoal/ coke and salt as required for chemical earthing. 02 nos. for pump set and 02 nos. for transformer (one body earthing and one neutral earthing ) , supplying and laying of 8 swg copper wire for making earthing connection in to from earthing station to panel to motor. , cost for supply and fitting of 200 amp. tpn main switch/ switch disconnector and doing all line connection. , providing, erecting 50 kva servo controlled automatic voltage stabilizer suitable for output voltage 415v+/ 1% and input 280 450 v, 3 phase ,50 hz , with copper wound transformer (oil cooled ) as mentioned below. the stabilizer shall function satisfactorily even if incoming supply is unbalanced between the phases within range of 10%. the stabilizer should be constructed in cubical box ,with by bidirectional wheels for easy handlingnecessarymonitors and users controls on front panel such as indication , alarm ,voltmeterand selector switch formeasuring input and output voltage , auto/manual selector switch , raise/low push buttons etc.suitable capacity termination strips and bush bars for incoming & outgoing cable should be provided. all three phases shall be independently monitored and corrected. following protections and indications shall be incorporated as per is :9815 (a) over voltage /under voltage (b) single phasing (c) cut off contractor with electronicoutput sensing unite suitable change over switch and earthing. , supply and top up transformer oil of reputed make...

Jharkhand Bijli Vitran Nigam Limited - Jharkhand

36940943 tender for supply of materials 1.lt stay set complete (1700x16 mm) with stay wire 7/12 swg 2.11 kv lightening arrestor s/stn.type 9kv 10ka heavy duty 3.stay set complete for dss with wire 4.11 kv earthing (chemical) with earthing pipe 20 mm 1.2 mtrs. long 5.11 kv h.g. fuse set 6.stone base plate...

Central Coalfields Limited - Jharkhand

36857827 repairing of 02 nos of base plate of 02 for 1000gpm pump installed one at main sump and other one at face sump topa ocp in topa project kuju area....

Central Coalfields Limited - Jharkhand

36746857 miscellaneous mechanical works i.e. making of coupling bolts with bush, changing of graphite packing, repair of damaged base plate and repair of sluice valves, associated with 500 g.p.m. pump and 1000 g.p.m. pump, in operation at d.d. mine, under bok miscellaneous mechanical works i.e. making of coupling bolts with bush, changing of graphite packing, repair of damaged base plate and repair of sluice valves, associated with 500 g.p.m. pump and 1000 g.p.m. pump, in operation at d.d. mine,...

Drinking Water And Sanitation Department - Jharkhand

36710992 supply, installation testing and commissioning of centrifugal pump sets with its allied work at boosting station clear water pumping plant of katras under d.w. & s. mechanical division, dhanbad for the year 2022 23. supply installation testing and commissioning of centrifugal pump sets with its allied work at boosting station clear water pumping plant katras , boosting station clear water pumping plant katras , supplying all labour tools and tackles for taking out old and damaged c/f pump set with all accessories , demolition of foundationfor installation of new hsc centrifugal pump sets. , supplying, installation, testing and commissioning of electrically drivenhorizontal split casing centrifugalpump set make(kirloskar/ wpil/ mather & plate/jyoti ) having discharge capacity of clear water45lps againsttotal head of 50 meter coupled with tefc sq. cage induction motor make (kriloskar/crompton/jyoti) operated on 415 + 10% volts, 50hz, 1470 rpm mounted on common m.s. fabricated base plate with cidf sluice valve 1 no,cidf nr valve 1 no, foot valve 1 no, pressure gauge 1 no, tire coupling 1 no etc all complete. , supplying all labour tools and tackles for making pcc foundtiaon 2nos, of size 5x3x3 with all materials such as cement , sand, stone chips, foundation bolt 6nos etc all complete and plastering and punning over exposed surface. , providing floor/wall mounted cubical l.t power control panel fabricated with ms sheet and painted, dust and vermin proof, proper ventilated, consisting of – proper distribution 315 amp copper bus bar 4 pole 1 set micro processor base tpn mccb315 amp l&t/ siemens make withearth faultrelay for incoming feeder – 1no. mccb 315 amp tp l&t /siemens make for outgoing feeder 6 nos.(1no for each pump sets) 315 amp. (main switch)tpn isolater switch 1nos suitable size of fully automatic star delta starter l & t/ bch/schnider make 2 nos. 0 500 v voltmeter with selector switch 2nosct operated ampere meter (0 200a) with ct 2 sets with selector switch 2nos, phase indicating neon lamp 6nos, s.p.p. 2nos doing internal wiring with proper gauge of copper wireetc all complete job and testing on load. , cost towards supplying andlaying of 185 mm2 x , 3 ½ core pvc insulated and pvc sheathed ,1.1 kv grade armered aluminium cable of reputed make and isi marked doing connection from pole to panel board . , cost towards supplying and laying of 16mm2 , 3 core pvc insulated and pvc sheathed,1.1 kv grade unarmered copper cable of reputed make and isi marked for doing connection from panel to motor. , cost towards making cable mouth for 185mm2 8nos , 16mm2 24nos , earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonary with cover plate having locking arrangements and watering pipe 2.7 meter long etc with charcoal/ coke and salt as required for chemical earthing. , supplying and laying of 8 swg copper wire for making earthing connection in to from earthing station to panel to motor . , cost for supply and fitting of 30 watt led flood light with bracket and doing line connection and testing. , cost for supplyin and laying of suction pipe line with supply and fiting of 6dia heavu duty gi pipe 6mtr, bend 1no, flange 6nos, but bolt+ washer 10 kg, rubber insertion 10kg cutting of pipe in required length and doing proper welding and fitting at site with at labour tools and tackles. , cost for delivery line with supply and fitting of 6dia heavy duty gi pipe 3mtr, bend 2nos, flange 4nos, nu bolt and washer 8kg.rubber insertion 8kg. and cutting of pipe in required size and welding work etc all complete...

Drinking Water And Sanitation Department - Jharkhand

36634758 supplying installation testing and commissioning of centrifugal pump set and its allied work at clear water pumping plant at bhelatand for govindpur water supply , clear water p / p at bhelatand for govindpur , cost towards supplying, installation, testing and commissioning of electrically drivenend suction type centrifugalpump set make ( kirloskar / wpil / mather & plate / jyoti ) coupled withsq. cage induction motor make ( kirloskar / crompton / jyoti / abb ) operated on 415 + 10% volts, 50hz, 2900 rpm mounted on common m.s. fabricated base plate with suitable size of cidf sluice valve 1 no, cidf nr valve 1 no, , pressure gauge 1 no, tyre coupling 1 no etc all complete. head 60 mdischarge 140m3 / h , supplying all labour tools and tackles for taking out old and damagedpump set with all accessories , demolition of foundationfor installation of new pump sets. , supplying all labour tools and tackles for making new pcc foundtiaon 2nos, of size 5x3x3 with all materials such as cement , sand, stone chips, foundation bolt 6nos etc all complete and plastering and punning over exposed surface. , cost for adjusting suction and delivery pipe line as required with supplying of 6 dia & 10dia pipe, bend, flange, nut, bolt, washer, rubber insertion etc, cutting of pipe in required size and doing complete welding work including all labour, tools, tackle and technician charges.with cp & ohc. ( rate after deducting the scrap materials. ) , cost for supplying and fitting ofwall mounted 24 diaexhoust fan of 2hp or suitable capacity, 3ph , heavy duty industrial type with all fittings and accessories etc all complete for clear water pumping plant, mcc room, etc of bhelatand. including all labour, tools, tackles, technician, driller and required material such as electric boards, switches, mcb, etc all complete. , cost towards supplying and laying of 2c x 4 sq. mm, pvc insulated and pvc round sheathed, copper conductor ( flexible ) industrial cable, 1100 volt, isi marked for common line for all 20nos. exhaust fan as above....

Central Coalfields Limited - Jharkhand

36565871 repairing work at multiple portions of staffa motor base plate of ir make feeder breaker ( local sl. no 01 ) installed at tarmi siding under sdocm...

Central Coalfields Limited - Jharkhand

36560773 repairing welding grinding and machining of upper and lower cashing pump body and repairing and modification of new base plate of 6up4 pump si no. 09 make kirloskar 60m discharge 1000gpm at konar river under arangdih colliery...

Bharat Coking Coal Limited - Jharkhand

36518514 dismantling of old and damaged pontoon ( ii ) fabrication of pontoon of size 21ftx21ft ( iii ) manual pontoon size 8ftx6ft ( iv ) installation of base plate of 4000 / 2000 gpm pump / motor on pontoon at devoting for required ocp...

Indian Army - Jharkhand

36444058 bids are invited for general purpose items for tech trg nut and bolt 6 inch , hinges 4 inch , iron angles 20 feet , gi sheet 32 sqft , iron cutter blade 4 inch , iron grinder blade 4 inch , ply wood solid 19 mm 32 sqft , square pipe iron 20 feet , screw 1 inch , gas pipe 10 mm , iron base plate total quantity : 837...

Indian Army - Jharkhand

36344532 bids are invited for proc of ord items j1 8340 001120 universal member for tent extendable f sup , a3 8340 000508 pin carbon steel small for tents , j1 8340 001116 3 way jt w base plate for tent extendable , j1 8340 001121 u pin for tent extendable frame supptd , j1 8340 001117 four way joint for tent extendable f suuptd total quantity : 1884...

Drinking Water And Sanitation Department - Jharkhand

36310525 dwsd dhanbad 03 2022 23 group c supply installation testing and commissioning of centrifugal pump sets with its allied work at boosting stating clear water pumping plant of katras , boosting station clear water pumping plant katras , supplying all labour tools and tackles for taking out old and damaged c/f pump set with all accessories , demolition of foundationfor installation of new hsc centrifugal pump sets. , supplying, installation, testing and commissioning of electrically drivenhorizontal split casing centrifugalpump set make(kirloskar/ wpil/ mather & plate/jyoti ) having discharge capacity of clear water45lps againsttotal head of 50 meter coupled with tefc sq. cage induction motor make (kriloskar/crompton/jyoti) operated on 415 + 10% volts, 50hz, 1470 rpm mounted on common m.s. fabricated base plate with cidf sluice valve 1 no,cidf nr valve 1 no, foot valve 1 no, pressure gauge 1 no, tire coupling 1 no etc all complete. , supplying all labour tools and tackles for making pcc foundtiaon 2nos, of size 5x3x3 with all materials such as cement , sand, stone chips, foundation bolt 6nos etc all complete and plastering and punning over exposed surface. , providing floor/wall mounted cubical l.t power control panel fabricated with ms sheet and painted, dust and vermin proof, proper ventilated, consisting of – proper distribution 315 amp copper bus bar 4 pole 1 set micro processor base tpn mccb315 amp l&t/ siemens make withearth faultrelay for incoming feeder – 1no. mccb 315 amp tp l&t /siemens make for outgoing feeder 6 nos.(1no for each pump sets) 315 amp. (main switch)tpn isolater switch 1nos suitable size of fully automatic star delta starter l & t/ bch/schnider make 2 nos. 0 500 v voltmeter with selector switch 2nosct operated ampere meter (0 200a) with ct 2 sets with selector switch 2nos, phase indicating neon lamp 6nos, s.p.p. 2nos doing internal wiring with proper gauge of copper wireetc all complete job and testing on load. , cost towards supplying andlaying of 185 mm2 x , 3 ½ core pvc insulated and pvc sheathed ,1.1 kv grade armered aluminium cable of reputed make and isi marked doing connection from pole to panel board . , cost towards supplying and laying of 16mm2 , 3 core pvc insulated and pvc sheathed,1.1 kv grade unarmered copper cable of reputed make and isi marked for doing connection from panel to motor. , cost towards making cable mouth for 185mm2 8nos , 16mm2 24nos , earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonary with cover plate having locking arrangements and watering pipe 2.7 meter long etc with charcoal/ coke and salt as required for chemical earthing. , supplying and laying of 8 swg copper wire for making earthing connection in to from earthing station to panel to motor . , cost for supply and fitting of 30 watt led flood light with bracket and doing line connection and testing. , cost for supplyin and laying of suction pipe line with supply and fiting of 6dia heavu duty gi pipe 6mtr, bend 1no, flange 6nos, but bolt+ washer 10 kg, rubber insertion 10kg cutting of pipe in required length and doing proper welding and fitting at site with at labour tools and tackles. , cost for delivery line with supply and fitting of 6dia heavy duty gi pipe 3mtr, bend 2nos, flange 4nos, nu bolt and washer 8kg.rubber insertion 8kg. and cutting of pipe in required size and welding work etc all complete...

Central Coalfields Limited - Jharkhand

36310187 repair and replacement of damaged delivery pipeline of 6 inch dia for dsm vi pump along with making of new base plate and installation of pump for domestic water supply near shiv mandir of ksp phase ii wrt konar exp. ocp, bnk area...

Bharat Coking Coal Limited - Jharkhand

36229325 dismantling, repairing of pontoon for ( i ) dismantling of old and damaged pontoon ( ii ) fabrication of pontoon of size 21ft x 21ft ( iii ) manual pontoon size 8ftx6 ( iv ) installation of base plate of 4000 / 2000 gpm pump / motor on pontoon at devoting for required ocp...

Central Coalfields Limited - Jharkhand

36205643 repairing and modification of new base plate of 4up3 pump si no. jwsp 10 make kirloskar discharge 380gpm head 40m and new base plate and suction and delivery line of peerless pump si no. jwsp 06 at new filter plant water supply jarangdih colliery...

Central Coalfields Limited - Jharkhand

36181419 fabrication of 04 nos. new base plates, coupling set with matching and alignment work of 1000 gpm, 3chr, mnp make multistage pump along with associated ht induction motor at site as required for mine dewatering and fire area at sdocm, dhori area....

East Central Railway - Jharkhand

36170575 supply of base plate of reduced thickness =10+ / 0.25 mm for 3 phase tm type 6fra6068 speed sensor ( make lenord + bauer ) used in btipl%u2019s igbt propulsion in wag9 locomotives. [ warranty period: 30 months after the date of delivery ] => limited...

Central Coalfields Limited - Jharkhand

36167676 tender for fabrication of 04 nos. new base plates, coupling set with matching and alignment work of 1000 gpm, 3chr, m&p make multistage pump along with associated ht induction motor at site as required for mine dewatering and fire area at sdocm, dhori area....

Central Coalfields Limited - Jharkhand

36160835 fabrication of base plate and ms beam of weigh bridge no. 2 and making of strips at top plate for better movement of vehicles and minimize under jarangdih siding of jrd ocp...

Urban Development Department - Jharkhand

36117304 new construction of rcc base plate and repairing and maintenance of electrical/mechanical equipments for jharia 1 and 2 pumping station under jmada ,dhanbad...

Bharat Coking Coal Limited - Jharkhand

36100231 repairing of base plate of crowd motor, one no. driving wheel, one no. driving shaft and painting of ekg hmb 481 at nichitpur ocp sijua area....

Bharat Coking Coal Limited - Jharkhand

36095591 dismantling of damaged rhs platform and repairing of platform, box and auto lube base plate, pto pipe covers and fitting in be 1000 hydraulic shovel sl. no.10222 at nichitpur ocp sijua area dismantling of damaged rhs platform and repairing of platform, box and auto lube base plate, pto pipe covers and fitting in be 1000 hydraulic shovel sl. no.10222 at nichitpur ocp sijua area...