Department Of Atomic Energy - Jharkhand

34224954 bids are invited for hq wireline full hole octagonal outer tube of core barrel with hard chrome plating ( q3 ) , nq wireline full hole octagonal outer tube of core barrel with hard chrome plating ( q3 ) , hq wire lineover size ( od ) drill rod 3 mt long ( q3 ) , nq wire lineover size ( od ) drill rod 3 mt long ( q3 ) total quantity : 128...

Mother Dairy - Jharkhand

34161211 tender for mother dairy fruit & vegetable private ltd. food processing unit (fpp),ranchi (jharkhand) have a requirement of refurnished (outer colour oxford blue colour)./ recycled ms barrels/drums 220 ltrs capacity. quantity = 15000 nos (approx.)....

Bharat Coking Coal Limited - Jharkhand

34035693 repairing of 3 nos. hydraulic main jack assly. of rt 630c crane s.no 406781 at antst jg ocp, lodna area, bccl. 1. dismantling of complete hydraulic main jack assly after cleaning from outside. 2. repairing of barrel, welding, machining, grinding, honing and polishing. 3. piston rod straightening and polishing....

Department Of Atomic Energy - Jharkhand

33975299 bids are invited for construction of community centre atturamdih township 1 earth work in excavation by mechanical means hydraulic excavator or manual means over areas exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan including disposal of excavated earth lead upto 50m and lift upto 1.5m disposed earth to be levelled and neatly dressed complete as per direction of eic. 2 excavating trenches of required width for pipes cables etc including excavation for sockets depth upto 1.5 m including getting out the excavated materials returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed within a lead of 50m as per direction of eic. pipes cables etc. not exceeding 80 mm dia. 3 filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 4 supplying and filling in plinth with foundation plinth wall sand under floors including watering ramming consolidating and dressing complete as per direction of eic. 5 surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m all kind of soil. 6 diluting and injecting chemical emulsion for postconstructional antitermite treatment excluding the cost of chemical emulsion treatment of soil under existing floors using chemical emulsion the existing floor. 7 treatment of existing masonry using chemical emulsion at the rate one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1 isto 2 1 cement isto 2 coarse sand to the full depth of the hole with chlorpyriphos or lindane ec 20 per cent with 1 percent concentration 8 providing and laying damp proof course 40mm thick with cement concrete 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate 12.5 mm nominal size. 9 extra for providing and mixing water proofing material in cement concrete work at the rate 1 kg per 50kg of cement. 10 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 isto 3 isto 6 1 cement isto 3 coarse sand isto 6 graded stone aggregate 20 mm nominal size including cost of cement reinforced cement as per direction of eic. 11 rcc in retaining walls roofs return walls walls any thickness including attached pilasters columns piers abutments pillars posts struts buttresses string or lacing courses parapets coping bed blocks anchor blocks plain window sills fillets upto floor five level excluding the cost of centering shuttering and finishing 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20 mm nominal size. 12 centering and shuttering including strutting propping etc. and removal of form for lintels beams plinth beams girders bressumers and cantilevers as per direction of eic. 13 reinforcement for rcc work including straightening cutting bending placing in position and binding all complete cold twisted bars 14 brick work with fps bricks of class designation 75 in foundation and plinth in cement mortar 1 isto 6 1 cement isto 6 coarse sand including mixing of mortar laying of bricks raking joints curing etc complete including cost of cement specification and direction of eic. 15 brick work with fps bricks of class designation 75 in super structure in cement mortar 1 isto 6 1 cement isto 6 coarse sand including mixing of mortar laying of bricks raking joints curing etc complete including cost of cement specification and direction of eic. 16 half brick masonry with fps bricks of class designation 75 in superstructure above plinth level upto floor v level. cement mirtar 1 isto 4 1 cement isto 4 coarse sand complete as per the direction of eic. 17 providing and fixing isi marked flush door shutters conforming to is2202 part i decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30mm thick including isi marked stainless steel butt hinges with necessary screws complete as per the direction of eic. 18 providing and fixing oxidised ms sliding door bolts with nuts and screws etc. complete 300 into 16mm 19 providing and fixing oxidised ms tower bolts black finish barrel type with necessary screws etc. complete 20 providing and fixing oxidised ms handles with necessary screws etc. complete 125mm 21 providing and fixing factory made steel glazed doors windows and ventilators side or top or centre hung with beading and all members of standard rolled steel sections joints mitred and flash butt welded and sash bars tenoned and riveted with 15 into 3mm lugs 10cm long embedded in cement concrete blocks 15 into 10 into 10cm of 1isto 3 isto 6 1 cement isto 3 coarse sand isto 6 graded stone aggregate 20mm nominal size or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including providing and fixing of hinges pivots float glass panes with glazing clips and special metal sash putty of approved make and a priming coat of approved steel primer excluding the cost of metal beading and other fittings except necessary hinges or pivots complete as per approved design complete as per the direction of eic. 22 providing and fixing tiron frames for doors windows and ventilators of mild steel tee ections joints mitred and welded with 15 into 3 mm lugs 10cm long embedded in cement concrete blocks 15 into 10 into 10 cm of 1 isto 3 isto 6 1 cement isto 3 coarse sand isto 6 graded stone aggregate 20 mm nominal size or with wooden plugs and screws or rawl plugs and screws or with dash fastener or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer complete as per the direction of eic. 23 providing and fixing ms fan clamp type i or ii of 16mm dia ms bar bent to shape with hooked ends in rcc slabs beams during laying including painting the exposed portion of loop all as per standard design complete complete as per the direction of eic. 24 cement concrete flooring 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete complete as per the direction of eic. 40mm thick with 20 mm nominal size stone aggregate. 25 providing and laying ceramic glazed floor tiles 300 into 300 mm thickness to be specified by the manufacturer of 1st quality conforming to is 15622 of approved make in colours such as white ivory grey fume red brown laid on 20mm thick cement mortar 1 isto 4 1 cement isto 4 coarse sand including pointing the joints with white cement and matching prgment etc. complete as per the direction of eic. 26 providing and fixing 1st quality ceramic glazed wall tiles conforming to is 15622 of approved make in all colours shades except burgundy bottle green black of any size as approved by eic in skirting, risers of steps and dados over 6 mm thick bed of cement mortar 1 isto 3 1 cement isto 3 coarse sand and jointing with grey cement slurry at the rate 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 27 providing and fixing on wall face pvc rain water pipes or toilet pipe including ms holder bat clamps wooden pegs etc with accessories like ci grating plain bend head shoes etc including filling joints with spun yarn soaked in neat cement slurry and cement mortar 1 isto 2 1 cement isto 2 fine sand including a coat of primer cost of all materials labour tools and tackles etc complete complete as per the direction of eic. upvc pipes working pressure 4 kgpersqm single socketed pipe 110 mm dia 28 12mm cement plaster of mix 1 isto 4 1 cement isto 4 fine sand complete as per the direction of eic. 29 15mm cement plaster on the rough side of single or half brick wall of mix 1 isto 6 1 cement isto 6 fine sand complete as per the direction of eic. 30 6mm cement plaster 1 isto 3 1 cement isto 3 fine sand finished with a floating coat of neat cement and thick coat of lime wash on top of walls when dry for bearing of rcc slabs and beams complete as per the direction of eic. 31 supplying and applying two 2 coats of white wash over old work at various elevations including preparation of surfaces cleaning etc. complete with all materials labour tools and tackle etc scaffolding work as per specifications and directions of eic. composition water at the rate 5 litres per kg of lime for making cream. fevicol ddl at the rate 4 gm per litre of lime cream. robin blue at the rate 2gm. per kg lime. 32 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work two or more coats over and including priming coat with cement primer. 33 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade approved brand and manufuacturer and ist quality 10 yrs like asian berger nerolac ici dulux old work one or more coats applied at the rate 0.83 ltr per10 sqm. 34 applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work second coat 35 painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work. 36 providing groove of uniform size in plastered surface as per approved pattern using wooden battens bnailed to the under layer including of wooden battens repairs to the edges of the plaster panel and finishing the groove complete as per specifications and direction of eic including all materials labour tools and tackles etc complete. 12mm into 12mm 37 demolishing cement concrete manually or by mechanical means including disposal of material within 50 metres lead as per direction of eic. 1 isto 3 isto 6 or richer mix 38 demolishing brick work in cement mortar including tacking of serviceable material and disposal of unserviceable material within 50 metres lead including all materials labour tools and tackles etc complete 39 making plinth protection 50mm thick of cement concrete 1 isto 3 isto 6 1 cement isto 3 coarse sand isto 6 graded stone aggregate 20 mm nominal size over 75 mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 40 providing and fixing water closet squatting pan indian type wc pan with 100mm sand cast iron p or s trap 10 litre low level white pvc flushing cistern with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern wc pan of size 580 into 440mm with integral type foot rests. 41 providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors ci trap and bend 100 mm inlet and 75 mm outlet sand cast iron sands as per is1729 42 providing and fixing 600 into 450 mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground fixed to wooden cleats with c p brass screws and washers complete 43 providing & fixing 600 into 120 into 5mm glass shelf with edges round of supported on anodised aluminium angle frame with c p brass brackets and guard rail complete fixed with 40mm long screws rawl plugs etc. complete 44 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm long towel rail with total legth of 645mm width 78mm and effective height of 88mm weighing not less than 190 gms. 45 providing and fixing 2mm thick plaster of paris 46 providing and fixing gi pipe complete with gi fittings and clamps i or c cutting and making good the walls etc. complete as per the direction of eic. 15mm dia nominal bore 47 providing and fixing gi pipe complete with gi fittings and clamps i or c cutting and making good the walls etc. complete as per the direction of eic. 20mm dia nominal bore 48 providing and fixing gi pipe complete with gi fittings and clamps i or c cutting and making good the walls etc. complete as per the direction of eic. 25mm dia nominal bore 49 providing and fixing gun metal gate valve with ci wheel of approved quality screwed end 25 mm nominal bore 50 providing and fixing cp brass shower rose with 15 or 20mm inlet 100 mm diameter make emco 51 providing and fixing c p brass bib cock of approved quality make emco 15mm nominal bore 52 constructing masonry chamber 60 into 60 into 75cm inside with 75 class designation brick work in cement mortar 1 isto 4 1 cement isto 4 coarse sand for sluice valve with ci surface box 100mm top diameter 160 mm bottom diameter and 180mm deep inside with chained lid and rcc top slab 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20 mm nominal size necessary excavation foundation concrete 1 isto 5 isto 10 1 cement isto 5 fine sand isto 10 graded stone aggregate 40mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement isto 3 coarse sand 12mm thick finished with a floating coat of neat cement complete as per standard design with fps bricks complete as per the direction of eic. 53 providing & fixing c p brass stop cock concealed of standard design and of approved make conforming to is 8931.15mm nominal bore. 54 making soak pit 2.5 m diameter 3.0 metre deep with 45 into 45cm dry brick honey comb shaft with bricks of class designation 75 and sw drain pipe 100mm diameter 1.8m long complete as per standard design with fps bricks 55 grading roof for water proofing treatment with cement concrete 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20mm nominal size 56 providing and placing on terrace at all floor levels polyethylene water storage tank isi 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflor pipes but without fittings and the base support for tank.make sintex 57 providing and fixing wash basin with ci brackets 15mm cp brass pillar taps 32mm cp brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required white vitreous china wash basin size 630 into 450 mm with a pair of 15mm c. p brass pillar taps complete as per the direction of eic. 58 wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in surface or recessed medium class pvc conduit as required 2 into 6 sqmm plus 1 into 6 sq mm earth wire 59 wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc.as required 60 wiring for light or power plug with 2 into 4 sqmm frls pvc insulated copper conductor single core cable in surface ot recessed medium class pvc conduit alongwith 1 no. 4 sqmm frls pvc insulated copper conductor single core cable for loop earthing as required 61 supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc. as required 62 3 pin 5or6 a socket outlet 63 6 pin 15or16 a socket outlet 64 supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required 65 supplying and fixing following size or modules gi box alongwith modular base and cover plate for modular switches in recess etc. 1 or 2 module 75 mm into 75 mm 66 4 module 125 mm into 75 mm 67 8 module 125 mm into 125 mm 68 supplying and fixing 3 pin 5 a ceiling rose on the existing junction box or wooden block including connections etc. as required 69 erection of wall bracket or ceiling fittings of all sizes and shapes containing upto two gls lamps per fitting complete with all accessories including connections etc. as required 70 installation testing and commissioning of pre wired fluorescent fitting or compact fluorescent fitting of all types complete with all accessories and tube etc. directly on ceiling or wall including connections with 1.5 sqmm fr pvc insulated copper conductor single core cable and earthing etc. as required 71 providing and fixing following rating and breaking capacity mccb in existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required 100 a 16 ka 72 supplying and fixing 5 a to 32 a rating 240or415 v 10 ka c curve miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections testing and commissioning etc. as required single pole 6 amp 73 supplying and fixing following rating four pole three phase and neutral 415 v residual current circuit breaker rccb having a sensitivity current 30 ma in the existing mcb db complete with connections testing and commissioning etc. as required 63 amps 74 earthing with gi earth pipe 4.5 meter long 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal or coke and salt as required 75 supplying and laying 25 mm into 5 mm g.i strip at 0.50 meter below ground as strip earth electrode including connection or terminating with gi nut bolt spring washer etc. as required. jointing shall be done by overlapping and with 2 sets of g.i nut bolt and spring washer spaced at 50 mm 76 fixing of lightning conductor finial single prong with base plate including holes etc. complete as required 77 providing and fixing g.i tape 20 mm into 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.for horizontal run 78 providing and fixing g.i tape 20 mm into 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. for vertical run 79 laying of one number pvc insulated and pvc sheathed or xlpe power cable of 1.1 kv grade of following size direct in ground including excavation sand cushioning protective covering and refilling the trench etc. as required upto 35or50 sq. 80 excavation for cable trench / foundation in soft soil including dressing of sides and ramming of ottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 meter 81 supply of 46inch 1200 mm sweep energy efficient 5 star high speed ceiling fan with electronic regulator size 150 watt make crompton complete in all respect as per specification and direction of eic. high breeze colour brown or ivopry 82 supply 1 into 40w led tube light make philips type bn 550 wled 20 to 300 led linea 83 supply and fixing of single phase energy meter kwh with box of model no. 1plcd meter 5 to 30a catno. wm1018csdl0bok make land t...

Hindustan Copper Limited - Jharkhand

33951966 repair work of kendadih mine office providing and fixing flush door shutters non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces 2 providing and fixing oxidised m.s. tower bolt ( barrel type ) with necessary screws etc. complete: 150*10 mm. 3 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 ( 1 cement: 4 fine sand ) 4 neat cement punning 5 distempering with dry distemper of approved brand and manufacture ( one or more coats ) and of require shade on old work to give an even shade. 6 providing and fixing oxidised m.s. handles with necessary screws etc. complete:100mm. 7 12 mm cement plaster of mix :1:6 ( 1 cement: 6 fine sand ) 8 6 mm cement plaster of mix :1:3 ( 1 cement: 3 fine sand ) 9 providing and fixing glass panes, with putty and nails wherever necessary:float glass panes of thickness 4mm 10 white washing with lime to give an even shade:old work ( one or more coat ) with lime 11 paintingwithsyntheticenamelpaintofapprovedbrandand manufacture of required colour to give an even shade :one or more coats on old work. 12 dismantling doors windows and clerstory windows ( steel or wood ) shrtter including chowkhats, architrave, holdfasts etc. complete and depositing the same in central / site stores. of area 3 sq.m and below 13 providingwoodwork in framesofdoors, windows, clerestorywindows and other frames, wrought framed and fixed in position : sal wood 14 welding by electric plant including transportation of electric welding plant at site etc. complete as per direction of engineer in charge. steel door / windows repair 15 providing and fixing isi 250x16 marked oxidized m.s. sliding door bolts with nuts and screws etc. complete:250 x16 mm 16 providing and fixing isi 3564 marked alluminium extruded section body tubular type universal hydraulic door closer withdouble speed adjustment with necessary accessories and screws etc complete 17 providing and laying ceramic glazed floor tiles 300x300 mm ( thickness to be specifiedbythemanufacturer ) of 1st quality conformingtois : 15622 of approved make in all colours 18 providing and fixing ist quality ceramic glazed wall tiles conforming to is:15622 ( thickness to be specified by the manufacturer ) , ...

Water Resources Department - Jharkhand

33804567 the quotation is invited to as certain an access the rate of materials as per with lowest market rate for framing of schedule of rate spirally welded / erw / saw / fabricated ms pipes , ms pipe with / wothout anyout coating on pedestal or chairs upon prepared formation , ms special such as enlarges , tees , blank flages barrel pieces etc , expansion joints for pipe lines , blast cleaning of old or new pipeline surface internally with mechanical cleaning machine , providing and applying primer first coat of intertol 49 w emmaline 05 / 58 pipe coat or any other equivalent approved paint to the internal surface of pipe line at site. ( for both surface ) , external coating providing and applying 100% solids polyurethane coating meeting 81516719 or rigid, directto metal, 100% solids polyurethane coating meeting awwa c 222 of minimum 1000 micron thickness on the external surface of ms pipe after blast cleaning lo sa2% with anchor profile of >t5microns using angular steel grit. pipe blast cleaning and coating shall only be permitted in the pipe manufacturers facility, preferably on rolling conveyor using fast set materials. the rates are including loading, unloading, handling and transportation of pipe etc. complete , lnternal lining providing and applying 100% solids polyurethane coating meeting bis 16719 or rigid, directto metal, 100% solids polyurethane coating meeting awwa c 222 and satisfying the criterionfordrinking water as per wrasbs 6920 to a thickness of 500 microns ( sspc pa2 ) on the internal surface of ms pipe after blast cleaning to sa 2% with anchor profile of >75 microns using angular steel grit. the coating should meet total organic carbon ( toc ) as per aphaawwawef53loc < 2.00 milligram / liter. pipe lining shall only be permitted in the pipe manufacturers facility. site application shall not be permitted. the rates are including loading, unloading, handling and transportation of pipe etc. complete. supplying all materials, labours ( skilled & unskilled ) tools & equipments for gas cutttng of steel barrel pieces / m.s.pipes of different dia of pipe up to 20mm thickness to exact dimension & shape by oxyacetylene method for subsequent welding of barrel pieces & pipes. supplying, fitting, fixing in position ( lncluding supplying all labours a equipnenrsl tte following actuator operated butterfly valves / sluice valves conforming to relevant ls. specification / lsl certification mark where ever applicable including all taxes and incidental charges carriage, unloading at worksite all complete job as per specification & direction of elc. ( flange joints to be paid separately ) supplying, fitting, fixing in position ( lncluding supplying all labours & equipments ) the following valves, expansion joints, fitting conforming to relevant l.s. specification. lsl certification mark where ever applicable including all taxes & incidental charges, carriage, unloading at work site etc. all complete job as per specification & direction of elc. ( flange joints to be paid separatelv ) ( iii ) cost steel valves ( a ) 600 mm dia cast steel air release valve ( b ) 600 mm dia cast steel pressure air release valve dl pipes supplying cent, rifugally cast ( spun ) ductile iron pressure pipe for water supply with socket and spigot ends confirming to 15:8329 / 2000 in standard lengths of class k 7 & k 9 suitable for push on joint ( rubber gasket jointing ) with cement mortar lining on inside surface and outside zinc coating with bituminous paint.rate are ex factory excluding transportation, taxes & duties, contractor profit & over head charges etc. k 7 size dia mm 100 dia mm 200 dia mm 250 dia mm 300 dia mm 350 dia mm 400 dia mm 450 dia mm 500 dia mm 600 dia mm 700 dia mm 750 dia mm 800 dia mm 900 dia mm 1000 k 9 size dia mm 100 dia mm 200 dia mm 250 dia mm 300 dia mm 350 dia mm 400 dia mm 450 dia mm 500 dia mm 600 dia mm 700 dia mm 750 dia rr { oo ura mm yuu dra n1m { o00 supplying labours tools and tackles for testing of lead.ffi pressure pipe upto 60 m head of water all complete as per specification direction el. dia mm 300 dia mm 350 dia mm 450 providing and supplying lsl standard d.l. specials & fitting with sealing r.rouer gatket of s8.r. complete with cast iron follower gland and m.s. nut & bolts coated or otherwise protected from rusting and suitable for d.l. pipes including cost of all labours and materials and transportation to stores / site, loading, unloading including all taxes, etc.complete as per 1.5.9523@ 2% providing double flanged sluice valve confirming for ls 2906 / 14846 includina *r, g.* arrangements as per test pressure stainless steel spindle, caps including all transportation etc. complete. sluice valve pn 1.6 , air valve , supplying |abours , tools, tackles lubricant etc for laying and;offi pipes ( class la ) trenche supplying rubber gasket ( rubber gaskets confirming to t.s.s. 5382 1969 ) and making gasket joints including providing night guard, barrier and red light to safe guard against accident, all complete ( pipe to be supplied departmentally free of cost ) as per ( 1.s.s.3114 1985 ) as per design, specification and direction of e. / 1., ci valve , ci sluice valve , supply all materials & construction of thrust block , high density polyethyene pipe ( hdpe pipe ) , supplying labours tools and tackles for testing of lead ct or upvc or hdpe or at or dl pressure pipe upto 60 m head of water all complete , supplying labours , tools tackles , lubricant etc for laying and jointing dl / c.l.s / s tyton pipes ( class la ) trenches supplying rubbber gasket ( rubber gasket confirming to l.s.s 5382 1969 ) and making gasket joints including providing night guard , barrier and red light to safe guard against accident all complete laying of pipes is to be done , labour charge for one cutting of cast iron / dl pipe & specials including supplying necessary tools and plants , chipping or filling the surface finish as per specification and direction of e / |. providing double flanged sluice valve confirming for ls 2906 / 74846 including worm gear arrangements as per test pressure satainless steel , spindle , caps including all transportation etc. complete. ( pn 1 without byepass arrangement. ) 110 mm dia ( hdpe ) 125 mm dia ( hdpe ) 140 mm dia ( hdpe ) 160 mm dai ( hdpe ) 180 mm dia ( hdpe ) 200 mm dia ( hdpe ) 225 mm dia ( hdpe ) 280 mm dia ( hdpe ) 400 mm dl k 7 supplying labour and tools for fixing cl sluice valve trenches with a pair of c.l tail pair including making ) flanged joints as per ls specification confirming to l.s.s 782 l978 confirming to ls.s 6557 1972 and nuts and bolts confirming to t.s.s 1364 1983 ) .lncluding drilling holes in flanged if required as per specification and direction of e / l . 110 mm dia ( hdpe ) 125 mm dia ( hdpe ) 140 mm dia ( hdpe ) 160 mm dai ( hdpe ) 180 mm dia ( hdpe ) 200 mm dia ( hdpe ) 225 mm dia ( hdpe ) 280 mm dia ( hdpe ) electrical and electronics equipment scada svstem for ugpl suree protection device switch yard / power station & other civil work supplying & installation of variable frequency drive ( vfd ) 7. sl.no. 1to 11 is completely new 2. sl.no. l2to 26 from dwsd sor 2021 3. sl.no. 27 to 30 miscellaneous ( electrical equipment ) ...

Department Of Atomic Energy - Jharkhand

33707404 bids are invited for copper h d long barrel tubular socket, 120 sq.m , copper h d long barrel tubular socket, 185 sq.m , copper h d long barrel tubular, socket, 70 sq.mm , copper h d long barrel tubular,socket, 95 sq.mm , copper h d long barrel tubular ,socket,50 sq.mm , copper lugs tinned 16sqmm crimping type, 3d 2541 ,copper h d long barrel tubular ,socket, 35 sq.mm ,copper h d long barrel tubular ,socket, 25 sq.mm ,long barrel alu.tube terminal for 50sqmmalu.cable, long barrel alu.tube terminal for70sqmmalu.cable total quantity : 2400...

Bharat Coking Coal Limited - Jharkhand

33664060 repairing and changing of jointing / barrel bolts of repairing and changing of jointing / barrel bolts of drag drum ( including hole repair ) of 24 / 96 dragline of abocp mine....

South Eastern Railways - Jharkhand

33483750 auction sale of lot no cetrd 0822058, desc released mobile oil [ with empty steel barrels of 210 liters capacity ] , qty 3600 ltrs [ in 18 nos empty steel barrels ] . leger ref no sv / rl / 8 / 219...

Bharat Coking Coal Limited - Jharkhand

33445846 repairing of 02 nos. broken idler shaft lhs and rhs welding and machining and repairing of 02 nos. grease cylinder, barrel ( scored ) grinding and polishing of dozer sl. no. g 11550 at akwmocp , katras area, bccl...

Tata Steel Limited - Jharkhand

33399518 auction sale of crmedt/0808/01 waste edt sludge including barrel in as is where is condition. no decanting allowed. on stock basis. total qty 10 mt...

Department Of Atomic Energy - Jharkhand

33243352 bids are invited for construction of lady toilet in potka under csr 1 clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth upto 30 cm. measured at a height of 1.0 metre above ground level and removal of rubbish up to a distance of 50 mtr out side the peripfery of the area cleared. 2 earthwork in excavation in the following types of soil and rock up to and including 1.5 mtr. lead including bailing or pumping out any water accumulating inside the excavated pit or trench shoring strutting as directed by engineer adequate protection to be taken during excavation or drilling or blasting transporting the excavated soil for all lead and stacking selectively including disposing off the rubbish rock fragments excess spoils etc. lead upto 100 mtrs. in the area as directed by the engineer all complete as per drawing specification and direction of the eic. a ) all types of soil …… 3 earth work in back filling with available earth including watering and compaction at all elevations around foundations walls wells tunnels pits culverts trenches road approaches and in plinth filling and area filling as per specifications and drawings and as directed by the engineer with selected spoil within a lead of 100 mtr. 4 supply mix place in position compact and cure cement concrete 1 isto 2 isto 4 one cement isto two coarse sand isto four graded stone aggregate 20 mm nominal size below foundations walls wells pits trenches etc. and in basin lining as per specifications drawings and directions of the engineer and including cost of centring and shuttering . 5 supply mix place in position compact and cure including testing of concrete specimens finishing surfaces in foundation as per specifications drawings and directions of the engineer of the following grades of concrete with 20mm and down graded stone aggregate and coarse sand in foundations excluding cost of centring shuttering and including cost of reinforcement. m20 rcc or pcc 6 supply mix place in position compact and cure including testing of concrete specimens finishing surfaces in superstructures as per specifications drawings and directions of the engineer of the following grades of concrete with 20mm and down graded stone aggregate and coarse sand in super structure excluding cost of centring shuttering and reinforcement. m20 rcc all complete as per direction of eic. 7 providing and fixing, bend bind and place the following types of reinforcement in all types of reinforced concrete work at all elevations including cleaning straightening cutting bending and binding with 18 swg annealed wire or with welding such as tack lap butt etc with approved electrodes providing concrete cover blocks pins chairs nails supports of reinforcement etc with all materials and labour complete as per drawings specifications and directions of engineer excluding cost of reinforcement. 8 structural steel work riveted bolted or welded in built up sections trusses and framed work includig cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete as per direction of eic. 9 providing and fixing isi marked flush door shutters conforming to is2202 part i decorative type core of block board construction with frame of first class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including isi marked stainless steel butt hinges with necessary screws all complete as per direction of eic. 10 centring and shuttering including strutting propping etc and removal of form for suspended floor roof landings balconies and access platforms 11 supply and laying in position brick work with designate 75 bricks compressive strength not less than 75 kg per sqcm in foundation upto plinth etc in cement coarse sand mortar 1 isto 6 including mixing mortar laying bricks raking joints curing etc complete with all materials and labour as per drawings and specifications including cost of cement all complete as per direction of eic. 12 supply and laying in position brick work with designate 75 bricks compressive strength not less than 75 kg persqcm in super structures etc in cement coarse sand mortar 1 isto 6 including mixing mortar laying bricks raking joints curing etc complete with all materials and labour as per drawings and specifications including cost of cement as per direction of eic. 13 half brick masonry with common burnt clay fps non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level cement mortar 1 isto 4 one cement isto four coarse sand all complete as per direction of eic including cost of all meterials labours and scaffolding etc. 14 providing and fixing factory made isi marked steel glazed doors windows and ventilators side or top or centre hung with beading and all members such as f7df4b k1 1 b and k12 b etc. complete of standard rolled steel sections joints mitred and flash butt welded and sash bars tenoned and riveted including providing and fixing of hinges pivots including priming coat of approved steel primer but excluding the cost of other fittings complete all as per approved design sectional weight of only steel members shall be measured for payment. fixing with 15 into 3 mm lugs 10 cm long embedded in cement concrete block 15 into 10 into 10 cm of cc. 1 isto 3 isto 6 one cement isto three coarse sand isto six graded stone aggregate 20 mm nominal size 15 15mm thick minimum plastering with 1 isto 6 one cement isto 6 coarse sand to all faces of walls channels in roof and other structures at various elevations including mixing laying, finishing curing and necessary scaffolding work complete as per drawings specifications and instructions of the eic with all materials and labours including cement. work will be done at any height. 16 applying neat cement punning including cost of all materials labours etc. complete as per direction of eic including cost of cement 17 supplying and applying two or more coats of white wash with lime to walls ceiling etc. at various elevations including preparation of surfaces cleaning etc.complete with all materials labour scaffolding work as per specifications . 18 supplying and finishing walls with acrylic smooth exterior paint of required shade new work two or more coat applied at the rate 1.67 ltr per10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg per 10 sqm all complete as per direction of eic. 19 painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade two or more coats on new or old work over a priming coat complete as per specification and direction of eic. 20 making plinth protection 50mm thick of cement concrete 1 isto 3 isto 6 one cement isto 3 coarse sand zone iii isto six graded stone aggregate 20 mm nominal size over 75mm thick bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling and dressing and finishing the top smooth. 21 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type a including bend shoe other fittings and jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion single socketed pipes 110 mm diameter 22 providing and fixing on wall face unplasticised rigid pvc rain water pipes or vent pipes conforming to is 13592 type a including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion single socketed pipes. 75 mm diameter including bend shoes coupler cowel etc all complete as per direction of eic 23 providing and fixing water closet squatting pan indian type wc pan with 100 mm sand cast iron p or s trap 10 litre low level white pvc flushing cistern including flush pipe with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern wc pan of size 580 into 440 mm with integral type foot rests. 24 providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe white pvc automatic flushing cistern with fittings standard size g i or pvc flush pipe for back and front flush with standard spreader pipes with fittings gi clamps and cp brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required range of two squatting plates with 5 litre pvc automatic flushing cistern all complete as per direction of eic. 25 providing and fixing wash basin with ci brackets 15 mm cp brass pillar taps 32 mm cp brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require white vitreous china wash basin size 630 into 450 mm with a single 15 mm cp brass pillar tap. 26 making soak pit 2.5 m diameter 3.0 metre deep with 45 into 45 cm dry brick honey comb shaft with bricks and sw drain pipe 100 mm diameter 1.8 m long complete as per standard design with common burnt clay fps non modular bricks of class designation 7.5 all complete as per direction of eic. 27 providing and fixing chlorinated polyvinyl chloride cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of eic.15mm nominal outer dia pipes 28 providing and fixing chlorinated polyvinyl chloride cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of eic. 20mm nominal outer dia pipes 29 providing and fixing chlorinated polyvinyl chloride cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of eic. 25mm nominal outer dia pipes 30 providing and fixing chlorinated polyvinyl chloride cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of eic. 50mm nominal outer dia pipes 31 providing and fixing cp brass bib cock of approved quality conforming to is8931 15 mm nominal bore 32 providing and fixing cp brass stop cock of approved quality conforming to is8931 15 mm nominal bore 33 providing and placing on terrace at all floor levels polyethylene water storage tank 1000 litres capacity is 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank. 34 providing and fixing ball valve brass of approved quality high or low pressure with plastic floats complete. 25 mm nominal bore 35 supply and fixing pvc flexible waste pipe 32 or 40mm nb 36 providing and fixing uplasticised pvc connection pipe with brass unions 45 cm long 15 mm nominal bore 37 providing and fixing on wall face unplasticised rigid pvc rain water pipes or vent pipes conforming to is 13592 type a including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion single socketed pipes. 75 mm diameter including bend shoes coupler cowel etc all complete as per direction of eic 38 providing and fixing 600 into 450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with cp brass screws and washers complete. 39 providing and laying damp proof course 40mm thick with cement concrete 1isto 2 isto 4 one cement isto 2 coarse sand zoneiii 4 graded stone aggregate 12.5mm nominal size all complete as per direction of eic. 40 providing hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses bands copings bed plates anchor blocks plain window sills and the like including the cost of required centering shuttering but excluding cost of reinforcement with 1 isto 1.5 isto 3 one cement isto 1.5 coarse sand zoneiii isto 3 graded stone aggregate 20 mm nominal size all complete as per direction of eic. 41 grading roof for water proofing treatment with cement concrete 1 isto 2 isto 4 one cement isto two coarse sand isto four graded stone aggregate 20mm nominal size including cost of cement all complete as per direction of eic. 42 providing and laying ceramic glazed floor tiles of size 300 into 300 mm thickness to be specified by the manufacturer of 1st quality conforming to is15622 of approved make in colours such as white ivory grey fume red brown laid on 20 mm thick cement mortar 1 isto 4 one cement isto four coarse sand jointing with grey cement slurry at the rate 3.3 kg per sqm including pointing the joints with white cement and matching pigment etc. all complete as per direction of eic. 43 providing and fixing ist quality ceramic glazed wall tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make in all colours shades except burgundy bottle green black of any size as approved by eic in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 one cement isto three coarse sand and jointing with grey cement slurry at the rate 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction of eic. 44 providing and fixing factory made p v.c door frame of size 50 into 47 mm with awall thickness of 5 mm made out of extruded 5mm rigid pvc foam sheet mitred at corners and joined with 2 nos of 150 mm long brackets of 15 into 15 mm ms square tube the vertical door frame profiles to be reinforced with 19 into 19 mm ms square tube of 19 gauge epdm rubber gasket weather seal to be provided through out the frame. the door frame to be fixed to the wall using ms screws of 65 or 100 mm size complete as per manufacturers specification and direction of eic. 45 providing and fixing to existing door frames 30 mm thick factory made polyvinyl chloride pvc door shutter made of styles and rails of a upvc hollow section of size 60 into 30 mm and wall thickness 2 mm plus negative 0.2 mm with inbuilt decorative moulding edging on one side. the styles and rails mitred and joint at the corners by means of ms galvanised or plastic brackets of size 75 into 220 mm having wall thickness 1.0 mm and stainless steel screws. the styles of the shutter reinforced by inserting galvanised ms tube of size 25 into 20 mm and 1 mm plus negative 0.1 mm wall thickness. the lock rail made up of h section a upvc hollow section of size 100 into 30 mm and 2 mm plus negative 0.2 mm wall thickness fixed to the shutter styles by means of plastic or galvanised ms u cleats. the shutter frame filled with a upvc multi chambered single panel of size not less than 620 mm having over all thickness of 20 mm and 1 mm plus negative 0.1 mm wall thickness . the panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised ms rod and fastened with nuts and washers complete as per manufacturers specification and direction of eic. 46 providing and fixing isi marked oxidised ms handles conforming to is4992 with necessary screws etc. complete 125mm 47 providing and fixing isi marked oxidised ms towe bolt black finish barrel type with necessary screws etc. complete 150 into 10mm 48 providing and fixing is 12817 marked stainless steel butt hinges with stainless steel screws etc. complete. 125 into 64 into 1.90mm 49 surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m. all kinds of soil as per direction of eic. total quantity : 1525...

South Eastern Railways - Jharkhand

33239769 auction sale of traction mast and portal, empty steel barrel 200 ltrs, aluminum scrap, section insulator, s.s. wire rope etc. total 16 items. total qty 7271.66 kg. [ ferrous 7108.860 kg, copper 8.500 kg, brass 29.300 kg, aluminum 89.000 kg, copper / brass 20.000 kg, fiber 15.000 kg and plastic 1.000 kg. ] . us and scrap. lot details are available in lot image....

Bharat Coking Coal Limited - Jharkhand

33217723 repairing of sub assy of barrel loader and related parts of repairing of sub assy of barrel loader and related parts of m/c sl no. 513 drill of abocp of block ii area...

Water Resources Department - Jharkhand

33214961 government of jharkhand through its public works department ( pwd ) is engaged in framing / revision of schedule of rates and as part of this endeavor, quotations through e tender are invited for rate of items / materials annexed as annexure 1 m.s pipe 1 m 1857 manufacturing, providing and supply ing spirally welded erw / 8aw / fabricated m. s. pipes ( commercial quality ) including procurements of plates gas cutting to required size rolling, tack welding assembling in suitable iength to form pipes, welding on automatic welding machine and forming v edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking excluding gst levied by goi & gom in all respect etc. complete as per is 3589 and is 5504 as applicable as per specifications ( no negative tolerance in thickness is permissible ) . tickness as per table no 5 of is 8589:200i a dia mm 1050 meter b dia mm 1100 meter c dia mm 1150 meter d dia mm 1200 meter e dia mm 1250 meter f dia mm 1300 meter g dia mm 1350 meter h dia mm 1400 meter i dia mm 1550 meter j dia mm 1650 meter k dia mm 2050 meter 2 m 1858 lowering, laying in position to correct line and level including m. s. pipes with / without any out coating on pedestals or chairs upon prepared formation. the rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation up to 500 m. etc. completed as specified i ) a bove 1000 mm. upto 1250 mm. dia. meter ii ) above 1250 mm. upto 1500 mm. dia. meter iii ) above 1550 mm. upto 1750 mm. dia. meter iv ) above 2000 mm. upto 2250 mm. dia. meter 3 m 1859 supplying all materials, labours, tools & equipments & fabricating & fixing in position m.s. specials such as enlarges, tees, blank flanges barrel pieces etc. for making connection of air valve, pressure release valve, scour valve etc of sizes up to 2100 mm dia out of 8.74 mm to 18mm thick m.s. plates / swms pipes, cutting to exact dimension & sfiape by oxycline or any other type of approved cutting machine, bending the plates to exact shape & welding longitudinal. circumferential beveled joints by using standard electrodes as per i.s. specification including hydraulic testing of each special at a pressure as desired including carriage of specials to worksite & jointing with pipe by welding all complete job as per specification & direction of eic. note: before fabricating specials, the exact dimension of the m.s. pipes should be ascertained by the contractor. a ms specials of different sizes mt 4 m 1860 providing, fabricating and fixing expansion joints for pipelines as per the drawing. the rate to include machining the strakes and steel ring as shown in the drawing and welding on either automatic welding machine or manually, rate includes plates and flats required for expansion joint and all other materials such as synthetic rubber, rubber ring, etc. including packing as per specifications, grease, bolts and nuts, local handling, excluding gst levied by goi & gom in all respect etc. all complete. a dia mm 1050 nos b dia mm 1100 nos c dia mm 1150 nos d dia mm 1200 nos e dia mm 1250 nos f dia mm 1300 nos g dia mm 1350 nos h dia mm 1400 nos i dia mm 1550 nos j dia mm 1650 nos k dia mm 2050 nos 5 m 1861 blast cleaning of old or new pipeline surface internally with mechanical cleaning machine having steel scraper blades with required passes including removing all rust. scaling etc. including cutting of pipes at required places, rewelding the same including cost of all materials and labour, etc, complete ( pipes pieces if required for rewelding of old pipeline shali be paid separately ) a dia mm 1050 sq. m. b dia mm 1100 sq. m. c dia mm 1150 sq. m. d dia mm 1200 sq. m. e dia mm 1250 sq. m. f dia mm 1300 sq. m. g dia mm 1350 sq. m. h dia mm 1400 sq. m. i dia mm 1550 sq. m. j dia mm 1650 sq. m. k dia mm 2050 sq. m. annexure i the interested party i.e. the quotationers shall quote price in the following format list of items used for ugpl under wrd jharkhand si. no. item code item description unit rate including roya { ty and other taxes but excluding gst ( in rs. ) 6 m 1862 provoding and applying primer first coat of intertol 49 w emmaline 05 / 58 pipe coat or any other equivalent approved paint to the internal surface of pipe line at site. ( for both surface ) a dia mm 1050 sq. m. b dia mm 1100 sq. m. c dia mm 1150 sq. m. d dia mm 1200 sq. m. e dia mm 1250 sq. m. f dia mm 1300 sq. m. g dia mm 1350 sq. m. h dia mm 1400 sq. m. i dia mm 1550 sq. m. j dia mm 1650 sq. m. k dia mm 2050 sq. m. first coat sq. m. second coat sq. m. 7 m 1863 external coating providing and applying 100% solids polyurethane coating meeting bis16719 or rigid, directto metat, 100% solids polyurethane coating meeting awwa c 222 of minimum 1000 micron thickness on the external surface of ms pipe after blast cleaning to sa 2 1 / 2 with anchor profile of >75microns using angular steel grit. pipe blast cleaning and coating shall only be permitted in the pipe manufacturer’s facility, preferably on rolling conveyor us ing fast set materials. the rates are including loading, unloading, handling and transportation of pipe etc. complete. sq. m. 8 m 1864 intemal lining providing and applying 100% solids polyurethane coating meeting bis 16719 or rigid, direct to metal, 100% solids polyurethane coating meeting awwa c 222 and satisfying the criterion for drinking water as per wrasbs 6920 to a thickness of 500 microns ( sspc pa2 ) on the inremal surface of ms pipe after blast cleaning to sa 2 1 / 2 wilh anchor profile of >75 microns using angular steel grit. the coating should meet total organic carbon ( toc ) as per aphaawwawef5310c < 2.00 mil1igram / lirer. pipe lining shall only be permitted in the pipe manufacturer’ s facility. site application shall not be permitted. the rates are including loading, unloading, handling and transportation of pipe etc. complete. sq. m. 9 m 1865 supplying all materials, labours ( skilled & unskilled ) tools & equipment’s for gas cutting of steel barrel pieces / m.s. pipes of different dia of pipe up to 20mm thickness to exact dimension & shape by oxyacetylene method for subsequent welding of barrel pieces & pipes. 10 m 1866 supplying, fitting, fixing in position ( including supplying all labours & equipments ) the following actuator operated butterfly valves / sluice valves conforming lo relevant i.s. specification / isi certification mark where ever applicable includiug all taxes and incidental charges carriage, unloading at worksite all complete job as per specification & direction of eic. ( flange joints to be paid separately ) a dia mm 1050 nos, b dia mm 1100 nos. c dia mm 1150 nos. d dia mm 1200 nos. e dia mm 1250 nos. f dia mm 1300 nos. g dia mm 1350 nos, h dia mm 1400 nos, i dia mm 1550 nos. j dia mm 1650 nos. k dia mm 2050 nos. 11 m 1867. supplying, fitiing, fixing in position ( including supplying al1 labours & equipments ) the following valves, expansion joints, ftting conforming io relevant i.s. specification. isi certification mark where ever applicable including all taxes & incidental charges, carriage, unloading at work site etc. all complete job as per specification & direction of eic. ( flange joints to be paid separately ) ( iii ) cost steel valves a ) 600 mm dia cast steel air release valve nos. b ) 600 mm dia cast steel pressure air release valve nos. di pipes 12 m 1868 supplying centrifugally cast ( spun ) ductile iron pressure pipe for water supply with socket and spigot ends confirming io is:8329 / 2000 in standard lengths of class k 7 & k 9 suitable for push on joint ( rubber gasket jointing ) with cement mortar lining on inside surface and outside zinc coating with bituminous paint. rate are ex factory excluding transportation, taxes & duties, contractor profit & over head charges etc. k 7 size a dia mm 100 m b dia mm 200 m c dia mm 250 m d dia mm 300 m e dia mm 350 m f dia mm 400 m g dia mm 450 m h dia mm 500 m i dia mm 600 m j dia mm 700 m k dia mm 750 m l dia mm 800 m m dia mm 900 m n dia mm 1000 m k 9 size a dia mm 100 m b dia mm 200 m c dia mm 250 m d dia mm 300 m e dia mm 350 m f dia mm 400 m g dia mm 450 m h dia mm 500 m i dia mm 600 m j dia mm 700 m k dia mm 750 m l dia mm 800 m m dia mm 900 m n dia mm 1000 m 13 m 1869 supplying labours tools and tackles for testing of lead ci or upvc or hdpe or ac or di pressure pipe upto 60 m head of water all complete as per specification direction el. a dia mm 300 m b dia mm 350 m c dia mm 400 m d dia mm 450 m e dia mm 500 m f dia mm 600 m g dia mm 700 m h dia mm 750 m i dia mm 800 m j dia mm 900 m k dia mm 1000 m 14 m 1870 providing and supplying isi standard d.i. specials & fitting with sealing rubber gasket of s.b.r. complete with cast iron follower gland and m.s. nut & bolts coated or otherwise protected from rusting and suitable for d.i. pipes including cost of all labours and materials and transportation to stores / site, loading, unloading including all taxes, etc.complete as per l8.9523@ 2% kg 15 m 1871 providing double flanged siuice valve confirming for is 2906 / 14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all transportation etc. complete. sluice valve pn 1.6 a dia mm 300 each b dia mm 350 each c dia mm 400 each d dia mm 450 each e dia mm 500 each f dia mm 600 each g dia mm 700 each h dia mm 750 each i dia mm 800 each j dia mm 900 each k dia mm 1000 each 16 m 1872 providing and supplying air valves as per is 10845 2000 and standard specifications of approved make and quality of following diameters including all taxes ( central and local ) , railway freight, inspection charges, unloading from raiiway wagons, loading into truck, transportation up to departmental stores / site unloading and stacking etc. complete. a 100 mm dia. each b 150 mm dia. each c 250 mm dia. each d 300 mm dia. each 17 m 1873 supplying labours , tools, tackles lubricanl etc for laying and joining di / c.i.s / s tyton pipes ( class la ) trenche supplying rubber gasket ( rubber gaskets confirming to i.s.s. 5382 1969 ) and making gasket joints including providing night guard, barrier and red light to safe guard against accident, all complete ( pipe to be supplied departmentally free of cost ) as per ( i.s.s.3114 1985 ) as per design, specification and direction of e / i. a dia mm 200 m b dia mm 250 m c dia mm 300 m d dia mm 350 m e dia mm 400 m f dia mm 450 m g dia mm 500 m h dia mm 600 m i dia mm 700 m j dia mm 750 m k dia mm 800 m l dia mm 900 m m dia mm 1000 m 18 m 1874 lowering, laying and fixing in proper alignment and position all types of c.i. air valves as directed by engineer in charge including cost of conveyance from store to site of work, cost of all material and giving satisfactory hydraulic testing etc.complete. ( for al1 class of valves ) . a 100 mm dia. each b 150 mm dia. each c 250 mm dia. each d 300 mm dia. each 19 m 1875 supplying labour and tools for fixing c.i. sluice valve in trenches with a pair of c.i. taii piece including making lead caulked joints and flanged joints as per i.s.s spęcification, including supplying all jointing materials ( pig lead confirming to i.s.s. 782 1978, yarn confirming to i.s.s. 6587—1972 and nuts and bolts confirming to i.s.s. 1364 — 1983 ) including driiling holes in flanges if required as per specification and direction of e / i. a dia mm 200 each b dia mm 250 each c dia mm 300 each d dia mm 350 each e dia mm 400 each f dia mm 450 each g dia mm 500 each h dia mm 600 each i dia mm 700 each j dia mm 750 each k dia mm 800 each l dia mm 900 each m dia mm 1000 each 20 m 1876 supply all materials & construction of thrust block where required each hdp e pipe 2 1 m 1877 providing and supplying high density potyethyene pipe ( hdpe pipe ) of 20 mm to 225 mm od and pressure 6.0 kg / cm2 and 10 kg / cm2 suitable for water supply which is available in all standard, like isi 4984, iso 4427 din 8074 and various grades like pe 63, pe 80, pe 100 and newly invented pe 100+ materials rates are ex factory excluding transportation, taxes and duties, contractor profit and overhead charges. ( for h dpe pipe grade pe 100, pn 10. ) a 110 mm dia ( hdpe ) rmtr b 125 mm dia ( hdpe ) rmtr c 140 mm dia ( hdpe ) rmtr d 160 mm dia ( hdpe ) rmtr e 180 mm dia ( hdpe ) rmtr f 200 mm dia ( hdpe ) rmtr g 225 mm dia ( hdpe ) rmtr h 250 mm dia ( hdpe ) rmtr i 280 mm dia ( hdpe ) rmtr 22 m 1878 supplying labours tools and tackles for testing of lead ci or upvc or hdpe or ac or di pressure pipe upto 60 m head of water all complete as per specification direction el. a 110 mm dia ( hdpe ) rmtr b 125 mm dia ( hdpe ) rmtr c 140 mm dia ( hdpe ) rmtr d 160 mm dia ( hdpe ) rmtr e 180 mm dia ( hdpe ) rmtr f 200 mm dia ( hdpe ) rmtr g 225 mm dia ( hdpe ) rmtr h 280 mm dia ( hdpe ) rmtr i 400 mm di k 7 rmtr 23 m 1879 supplying labours , tools, tackles lubricanl etc for laying and joining di / c.i.s / s tyton pipes ( class la ) trenche supplying rubber gasket ( rubber gaskets confirming to i.s.s. 5382 1969 ) and making gasket joints including providing night guard, barrier and red light to safe guard against accident, all complete laying of pipes is to be done a as per ( i.s.s.3114 1985 ) as per design, specification and direction of e / i. a 110 mm dia ( hdpe ) rmtr b 125 mm dia ( hdpe ) rmtr c 140 mm dia ( hdpe ) rmtr d 160 mm dia ( hdpe ) rmtr e 180 mm dia ( hdpe ) rmtr f 200 mm dia ( hdpe ) rmtr g 225 mm dia ( hdpe ) rmtr h 280 mm dia ( hdpe ) rmtr i 400 mm di k 7 rmtr 24 m 1880 labour charge for one cutting of cast iron / di pipe & specials including supplying , necessary tools and plants , chipping or filling the surface finish as per specification and direction of e / i. a 110 mm dia ( hdpe ) each b 125 mm dia ( hdpe ) each c 140 mm dia ( hdpe ) each d 160 mm dia ( hdpe ) each e 180 mm dia ( hdpe ) each f 200 mm dia ( hdpe ) each g 225 mm dia ( hdpe ) each h 280 mm dia ( hdpe ) each i 400 mm di k 7 each 25 m 1881 providing double flanged sluice valve confirming for is 2906 / 14846 including worm gear arrangements as per test pressure stainless steel , spindle, caps including all transportation etc. complete. ( pn 1 without byepass arrangement. ) a 110 mm dia ( hdpe ) each b 125 mm dia ( hdpe ) each c 140 mm dia ( hdpe ) each d 160 mm dia ( hdpe ) each e 180 mm dia ( hdpe ) each f 200 mm dia ( hdpe ) each g 225 mm dia ( hdpe ) each h 280 mm dia ( hdpe ) each i 400 mm di k 7 each 26 m 1882 supplying labour and tools for fixing ci sluice valve trenches with a pair of c. i tail pair including making ) flanged joints as per is specification confirming to i.s.s 782 1978 confinning to i.s.s 6557 1972 and nuts and bolts confirming to i.s.s 1364 1983 ) . including drilling holes in flanged if required as per specification and direction of e / i. a 110 mm dia ( hdpe ) each b 125 mm dia ( hdpe ) each c 140 mm dia ( hdpe ) each d 160 mm dia ( hdpe ) each e 180 mm dia ( hdpe ) each f 200 mm dia ( hdpe ) each g 225 mm dia ( hdpe ) each h 280 mm dia ( hdpe ) each i 400 mm di k 7 each electrical and electronics equipment 27 m 1883 scada system for ugpl nos. 28 m 1884 surge protection device nos. 29 m 1885 switch yard / power station & other civi1 work nos. 30 m 1886 supplying & installation of variable frequency drive ( vfd ) ...

South Eastern Railways - Jharkhand

33192641 auction sale of lot no els/tata 21 22/e , desc released unserviceable transformer oil and gr oil contaminated with copper dust, high acidity and low bdv along in 70 barrels, qty 14000 ltrs....

South Eastern Railways - Jharkhand

33192639 auction sale of [1] lot no. els/tata 21 22/a , empty barrel, qty. 23 nos. wt of each barrel= 22 kgs. [2] lot no. els/tata 21 22/b , empty barrel, qty. 22 nos. wt of each barrel= 16 kgs [3] lot no. els/tata 21 22/c , empty barrel (without barrel cover), qty. 06 nos. wt of each barrel= 20 kgs [4] lot no. els/tata 21 22/d , bend/broken/rusted empty barrel, qty. 43 nos., wt of each barrel=16 kgs....

Water Resources Department - Jharkhand

33135964 the quotation is invited to as certain an access the rate of materials at per with lowest market rate for framing of schedule of rate 1 m 1857 manufacturing, providing and supplying spirally welded / erw / saw / fabricated m. s. pipes ( commercial quality ) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘v’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding gst levied by goi & gom in all respect etc. complete as per is 3589 and is 5504 as applicable as per specifications ( no negative tolerance in thickness is permissible ) .thickness as per table no 5 of is 3589:2001 a dia mm 1050 b dia mm 1100 c dia mm 1150 d dia mm 1200 e dia mm 1250 f dia mm 1300 g dia mm 1350 h dia mm 1400 i dia mm 1550 j dia mm 1650 k dia mm 2050 2 m 1858 lowering, laying in position to correct line and level including m. s. pipes with / without any out coating on pedestals or chairs upon prepared formation. the rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation up to 500 m. etc. completed as specified. i ) above 1000 mm. upto1250 mm. dia. ii ) above 1250 mm. up to 1500 mm. dia. iii ) above 1550 mm. up to 1750 mm. dia. iv ) above 2000 mm. up to 2250 mm. dia. 3 m 1859 supplying all materials, labours, tools & equipments & fabricating & fixing in position m.s. specials such as enlarges, tees, blank flanges barrel pieces etc. for making connection of air valve, pressure release valve, scour valve etc. of sizes up to 2100 mm dia out of 8.74mm to 18mm thick m.s. plates / swms pipes, cutting to exact dimension & shape by oxycline or any other type of approved cutting machine, bending the plates to exact shape & welding longitudinal. circumferential beveled joints by using standard electrodes as per i.s. specification including hydraulic testing of each special at a pressure as desired including carriage of specials to worksite & jointing with pipe by welding all complete job as per specification & direction of eic. note: before fabricating specials, the exact dimension of the m.s. pipes should be ascertained by the contractor. a ms specials of different sizes 4 m 1860 providing, fabricating and fixing expansion joints for pipelines as per the drawing. the rate to include machining the strakes and steel ring as shown in the drawing and welding on either automatic welding machine or manually, rate includes plates and flats required for expansion joint and all other materials such as synthetic rubber, rubber ring, etc. including packing as per specifications, grease, bolts and nuts, local handling, excluding gst levied by goi & gom in all respect etc. all complete. a dia mm 1050 b dia mm 1100 c dia mm 1150 d dia mm 1200 e dia mm 1250 f dia mm 1300 g dia mm 1350 h dia mm 1400 i dia mm 1550 j dia mm 1650 k dia mm 2050 5 m 1861 blast cleaning of old or new pipeline surface internally with mechanical cleaning machine having steel scraper blades with required passes including removing all rust, scaling etc. including cutting of pipes at required places, rewelding the same including cost of materials and labour, etc, complete ( pipes pieces if required for rewelding of old pipeline shall be paid separately. ) a dia mm 1050 b dia mm 1100 c dia mm 1150 d dia mm 1200 e dia mm 1250 f dia mm 1300 g dia mm 1350 h dia mm 1400 i dia mm 1550 j dia mm 1650 k dia mm 2050 6 m 1862 providing and applying primer first coat of intertol 49 w emmaline 05 / 58 pipe coat or any other equivalent approved paint to the internal surface of pipe line at site. ( for both surface ) a dia mm 1050 b dia mm 1100 c dia mm 1150 d dia mm 1200 e dia mm 1250 f dia mm 1300 g dia mm 1350 h dia mm 1400 i dia mm 1550 j dia mm 1650 k dia mm 2050 first coat second coat 7 m 1863 external coating providing and applying 100% solids polyurethane coating meeting bis16719 or rigid, directto metal, 100% solids polyurethane coating meeting awwa c 222 of minimum 1000 micron thickness on the external surface of ms pipe after blast cleaning to sa 2½ with anchor profile of >75microns using angular steel grit. pipe blast cleaning and coating shall only be permitted in the pipe manufacturer’s facility, preferably on rolling conveyor using fast set materials. the rates are including loading, unloading, handling and transportation of pipe etc. complete. 8 m 1864 internal lining providing and applying 100% solids polyurethane coating meeting bis 16719 or rigid, directto metal, 100% solids polyurethane coating meeting awwa c 222 and satisfying the criterionfordrinking water as per wrasbs 6920 to a thickness of 500 microns ( sspc pa2 ) on the internal surface of ms pipe after blast cleaning to sa 2½ with anchor profile of >75 microns using angular steel grit. the coating should meet total organic carbon ( toc ) as per aphaawwawef5310c < 2.00 milligram / liter. pipe lining shall only permitted in the pipe manufacturer’s facility. site application shall not be permitted. the rates are including loading, unloading, handling and transportation of pipe etc. complete. 9 m 1865 supplying all materials, labours ( skilled & unskilled ) tools & equipments for gas cutting of steel barrel pieces / m.s.pipes of different dia of pipe up to 20mm thickness to exact dimension & shape by oxyacetylene method for subsequent welding of barrel pieces pipes. 10 m 1866 supplying, fitting, fixing in position ( including supplying all labours & equipments ) the following actuator operated butterfly valves / sluice valves conforming to relevant i. specification / isi certification mark where ever applicable including all taxes and incidental charges carriage, unloading at worksite all complete job as per specification & direction eic. ( flange joints to be paid separately ) a dia mm 1050 b dia mm 1100 c dia mm 1150 d dia mm 1200 e dia mm 1250 f dia mm 1300 g dia mm 1350 h dia mm 1400 i dia mm 1550 j dia mm 1650 k dia mm 2050 11 m 1867 supplying, fitting, fixing in position ( including supplying all labours & equipments ) the following valves, expansion joints, fitting conforming to relevant i.s. specification. certification mark where ever applicable including all taxes & incidental charges, carriage, unloading at work site etc. all complete job as per specification & direction of eic. ( flange joints to be paid separately ) ( iii ) cost steel valves ( a ) 600 mm dia cast steel air release valve ( b ) 600 mm dia cast steel pressure air release valve di pipes 12 m 1868 supplying centrifugally cast ( spun ) ductile iron pressure pipe for water supply with socket and spigot ends confirming to is:8329 / 2000 in standard lengths of class k & k 9 suitable for push on joint ( rubber gasket jointing ) with cement mortar lining on inside surface and outside zinc coating with bituminous paint.rate are factory excluding transportation, taxes & duties, contractor profit & over head charges etc. k 7 size a dia mm 100 b dia mm 200 c dia mm 250 d dia mm 300 e dia mm 350 f dia mm 400 g dia mm 450 h dia mm 500 i dia mm 600 j dia mm 700 k dia mm 750 l dia mm 800 m dia mm 900 n dia mm 1000 k 9 size a dia mm 100 b dia mm 200 c dia mm 250 d dia mm 300 e dia mm 350 f dia mm 400 g dia mm 450 h dia mm 500 i dia mm 600 j dia mm 700 k dia mm 750 l dia mm 800 m dia mm 900 n dia mm 1000 13 m 1869 supplying labours tools and tackles for testing of lead ci or upvc or hdpe or ac or pressure pipe upto 60 m head of water all complete as per specification direction ei. a dia mm 300 b dia mm 350 c dia mm 400 d dia mm 450 e dia mm 500 f dia mm 600 g dia mm 700 h dia mm 750 i dia mm 800 j dia mm 900 k dia mm 1000 14 m 1870 providing and supplying isi standard d.i. specials & fitting with sealing rubber gasket s.b.r. complete with cast iron follower gland and m.s. nut & bolts coated or otherwise protected from rusting and suitable for d.i. pipes including cost of all labours and materials and transportation to stores / site, loading, unloading including all taxes, etc.complete per i.s.9523@ 2% 15 m 1871 providing double flanged sluice valve confirming for is 2906 / 14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all transportation etc. complete. sluice valve pn 1.6 a dia mm 300 b dia mm 350 c dia mm 400 d dia mm 450 e dia mm 500 f dia mm 600 g dia mm 700 h dia mm 750 i dia mm 800 j dia mm 900 k dia mm 1000 16 m 1872 providing and supplying air valves as per is 10845 2000 and standard specifications approved make and quality of following diameters including all taxes ( central and local ) , railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation up to departmental stores / site unloading and stacking etc. complete. a 100 mm dia. b 150 mm dia. c 250 mm dia. d 300 mm dia. 17 m 1873 supplying labours , tools, tackles lubricant etc for laying and jointing di / c.i.s / s tyton pipes ( class la ) trenche supplying rubber gasket ( rubber gaskets confirming to i.s.s. 5382 1969 ) and making gasket joints including providing night guard, barrier and red light to safe guard against accident, all complete ( pipe to be supplied departmentally free of cost ) as per ( i.s.s.3114 1985 ) as per design, specification and direction of e. / i. a dia mm 200 b dia mm 250 c dia mm 300 d dia mm 350 e dia mm 400 f dia mm 450 g dia mm 500 h dia mm 600 i dia mm 700 j dia mm 750 k dia mm 800 l dia mm 900 m dia mm 1000 18 m 1874 lowering, laying and fixing in proper alignment and position all types of c.i.air valves as directed by engineer –in–charge including cost of conveyance from store to site of work, cost of all material and giving satisfactory hydraulic testing etc.complete. ( for all class of valves ) . a 100 mm dia. b 150 mm dia. c 250 mm dia. d 300 mm dia. 19 m 1875 supplying labourand tools for fixing c.i.sluice valve in trenches with a pair of c.i.tail piece including making lead caulked joints and flanged joints as per i.s.s. specification, including supplying all jointing materials ( pig lead confirming to i.s.s. 782 1978, yarn confirming to i.s.s. 6587–1972 and nuts and bolts confirming to i.s.s.1364 –1983 ) including drilling holes in flanges if required as per specification and direction of e / i. a dia mm 200 b dia mm 250 c dia mm 300 d dia mm 350 e dia mm 400 f dia mm 450 g dia mm 500 h dia mm 600 i dia mm 700 j dia mm 750 k dia mm 800 l dia mm 900 m dia mm 1000 20 m 1876 supply all materials & construction of thrust block where required. hdpe pipe 21 m 1877 providing and supplying high density polyethyene pipe ( hdpe pipe ) of 20 mm to 225 mm od and pressure 6.0 kg / cm2 and 10 kg / cm2 suitable ford water supply which is available in all standard, like isi 4984, iso 4427 din 8074 and various grades like pe 63, pe 80, pe 100 and newly invented pe 100+ materials rates are exfactory excluding transpotation, taxes and duties, contractor profit and overhead charges. ( for hdpe pipe grade pe 100, pn 10. ) a 110 mm dia ( hdpe ) b 125 mm dia ( hdpe ) c 140 mm dia ( hdpe ) d 160 mm dia ( hdpe ) e 180 mm dia ( hdpe ) f 200 mm dia ( hdpe ) g 225 mm dia ( hdpe ) h 250 mm dia ( hdpe ) i 280 mm dia ( hdpe ) 22 m 1878 supplying labours tools and tackles for testing of lead ci or upvc or hdpe or ac or di pressure pipe upto 60 m head of water all complete as per specification direction ei. a 110 mm dia ( hdpe ) b 125 mm dia ( hdpe ) c 140 mm dia ( hdpe ) d 160 mm dai ( hdpe ) e 180 mm dia ( hdpe ) f 200 mm dia ( hdpe ) g 225 mm dia ( hdpe ) h 280 mm dia ( hdpe ) i 400 mm di k 7 23 m 1879 supplying labours , tools tackles , lubricant etc for laying and jointing di / c.i.s / s tyton pipes ( class la ) trenches supplying rubbber gasket ( rubber gasket confirming to i.s.s 5382 1969 ) and making gasket joints including providing night guard , barrier and red light to safe guard against accident all complete laying of pipes is to be done as per ( i.s.s 3114 1985 ) as per design , specification and direction of e / i a 110 mm dia ( hdpe ) b 125 mm dia ( hdpe ) c 140 mm dia ( hdpe ) d 160 mm dai ( hdpe ) e 180 mm dia ( hdpe ) f 200 mm dia ( hdpe ) g 225 mm dia ( hdpe ) h 280 mm dia ( hdpe ) i 400 mm di k 7 24 m 1880 labour charge for one cutting of cast iron / di pipe & specials including supplying , necessary tools and plants , chipping or filling the surface finish as per specification and direction of e / i. a 110 mm dia ( hdpe ) b 125 mm dia ( hdpe ) c 140 mm dia ( hdpe ) d 160 mm dai ( hdpe ) e 180 mm dia ( hdpe ) f 200 mm dia ( hdpe ) g 225 mm dia ( hdpe ) h 280 mm dia ( hdpe ) i 400 mm di k 7 25 m 1881 providing double flanged sluice valve confirming for is 2906 / 14846 including worm gear arrangements as per test pressure satainless steel , spindle , caps including all transportation etc. complete. ( pn 1 without byepass arrangement. ) a 110 mm dia ( hdpe ) b 125 mm dia ( hdpe ) c 140 mm dia ( hdpe ) d 160 mm dai ( hdpe ) e 180 mm dia ( hdpe ) f 200 mm dia ( hdpe ) g 225 mm dia ( hdpe ) h 280 mm dia ( hdpe ) i 400 mm di k 7 26 m 1882 supplying labour and tools for fixing ci sluice valve trenches with a pair of c.i tail pair including making ) flanged joints as per is specification confirming to i.s.s 782 1978 confirming to i.s.s 6557 1972 and nuts and bolts confirming to i.s.s 1364 1983 ) .including drilling holes in flanged if required as per specification and direction of e / i . a 110 mm dia ( hdpe ) b 125 mm dia ( hdpe ) c 140 mm dia ( hdpe ) d 160 mm dai ( hdpe ) e 180 mm dia ( hdpe ) f 200 mm dia ( hdpe ) g 225 mm dia ( hdpe ) h 280 mm dia ( hdpe ) i 400 mm di k 7 electrical and electronics equipment 27 m 1883 scada system for ugpl 28 m 1884 surge protection device 29 m 1885 switch yard / power station & other civil work 30 m 1886 supplying & installation of variable frequency drive ( vfd ) ...

Water Resources Department - Jharkhand

33133188 the quotation is invited to ascertain and assess the rate of materials at par with lowest market rate for framing of schedule of rate m 1857 manufacturing, providing and supplying spirally welded / erw/ saw / fabricated m. s. pipes (commercial quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘v’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding gst levied by goi & gom in all respect etc. complete as per is 3589 and is 5504 as applicable as per specifications (no negative tolerance in thickness is permissible).thickness as per table no 5 of is 3589:2001 dia mm 1050 dia mm 1100 dia mm 1150 dia mm 1200 dia mm 1250 dia mm 1300 dia mm 1350 dia mm 1400 dia mm 1550 dia mm 1650 dia mm 2050 m 1858 lowering, laying in position to correct line and level including m. s. pipes with / without any out coating on pedestals or chairs upon prepared formation. the rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation up to 500 m. etc. completed as specified. i) above 1000 mm. upto1250 mm. dia. ii) above 1250 mm. up to 1500 mm. dia. iii) above 1550 mm. up to 1750 mm. dia. iv) above 2000 mm. up to 2250 mm. dia. m 1859 supplying all materials, labours, tools & equipments & fabricating & fixing in position m.s. specials such as enlarges, tees, blank flanges barrel pieces etc. for making connection of air valve, pressure release valve, scour valve etc. of sizes up to 2100 mm dia out of 8.74mm to 18mm thick m.s. plates/swms pipes, cutting to exact dimension & shape by oxycline or any other type of approved cutting machine, bending the plates to exact shape & welding longitudinal. circumferential beveled joints by using standard electrodes as per i.s. specification including hydraulic testing of each special at a pressure as desired including carriage of specials to worksite & jointing with pipe by welding all complete job as per specification & direction of eic. note: before fabricating specials, the exact dimension of the m.s. pipes should be ascertained by the contractor. ms specials of different sizes m 1860 providing, fabricating and fixing expansion joints for pipelines as per the drawing. the rate to include machining the strakes and steel ring as shown in the drawing and welding on either automatic welding machine or manually, rate includes plates and flats required for expansion joint and all other materials such as synthetic rubber, rubber ring, etc. including packing as per specifications, grease, bolts and nuts, local handling, excluding gst levied by goi & gom in all respect etc. all complete. dia mm 1050 dia mm 1100 dia mm 1150 dia mm 1200 dia mm 1250 dia mm 1300 dia mm 1350 dia mm 1400 dia mm 1550 dia mm 1650 dia mm 2050 m 1861 blast cleaning of old or new pipeline surface internally with mechanical cleaning machine having steel scraper blades with required passes including removing all rust, scaling etc. including cutting of pipes at required places, rewelding the same including cost of all materials and labour,etc, complete (pipes pieces if required for rewelding of old pipeline shall be paid separately.) dia mm 1050 dia mm 1100 dia mm 1150 dia mm 1200 dia mm 1250 dia mm 1300 dia mm 1350 dia mm 1400 dia mm 1550 dia mm 1650 dia mm 2050 m 1862 providing and applying primer first coat of intertol 49 w emmaline 05/58 pipe coat or any other equivalent approved paint to the internal surface of pipe line at site. (for both surface) dia mm 1050 dia mm 1100 dia mm 1150 dia mm 1200 dia mm 1250 dia mm 1300 dia mm 1350 dia mm 1400 dia mm 1550 dia mm 1650 dia mm 2050 first coat second coat m 1863 external coating providing and applying 100% solids polyurethane coating meeting bis16719 or rigid, directto metal,100% solids polyurethane coating meeting awwa c 222 of minimum 1000 micron thickness on the external surface of ms pipe after blast cleaning to sa 2½ with anchor profile of >75microns using angular steel grit. pipe blast cleaning and coating shall only be permitted in the pipe manufacturer’s facility, preferably on rolling conveyor using fast set materials. the rates are including loading, unloading, handling and transportation of pipe etc. complete. m 1864 internal lining providing and applying 100% solids polyurethane coating meeting bis 16719 or rigid, directto metal,100% solids polyurethane coating meeting awwa c 222 and satisfying the criterionfordrinking water as per wrasbs 6920 to a thickness of 500 microns (sspc pa2) on the internal surface of ms pipe after blast cleaning to sa 2½ with anchor profile of >75 microns using angular steel grit. the coating should meet total organic carbon (toc) as per aphaawwawef5310c < 2.00 milligram/ liter. pipe lining shall only be permitted in the pipe manufacturer’s facility. site application shall not be permitted. the rates are including loading, unloading, handling and transportation of pipe etc. complete. m 1865 supplying all materials, labours (skilled & unskilled) tools & equipments for gas cutting of steel barrel pieces/m.s.pipes of different dia of pipe up to 20mm thickness to exact dimension & shape by oxyacetylene method for subsequent welding of barrel pieces & pipes. m 1866 supplying, fitting, fixing in position (including supplying all labours & equipments) the following actuator operated butterfly valves/sluice valves conforming to relevant i.s. specification /isi certification mark where ever applicable including all taxes and incidental charges carriage, unloading at worksite all complete job as per specification & direction of eic. (flange joints to be paid separately) dia mm 1050 dia mm 1100 dia mm 1150 dia mm 1200 dia mm 1250 dia mm 1300 dia mm 1350 dia mm 1400 dia mm 1550 dia mm 1650 dia mm 2050 m 1867 supplying, fitting, fixing in position (including supplying all labours & equipments) the following valves, expansion joints, fitting conforming to relevant i.s. specification. isi certification mark where ever applicable including all taxes & incidental charges, carriage, unloading at work site etc. all complete job as per specification & direction of eic. (flange joints to be paid separately) (iii) cost steel valves (a) 600 mm dia cast steel air release valve (b) 600 mm dia cast steel pressure air release valve di pipes m 1868 supplying centrifugally cast (spun) ductile iron pressure pipe for water supply with socket and spigot ends confirming to is:8329/2000 in standard lengths of class k 7 & k 9 suitable for push on joint (rubber gasket jointing) with cement mortar lining on inside surface and outside zinc coating with bituminous paint.rate are ex factory excluding transportation, taxes & duties, contractor profit & over head charges etc. k 7 size dia mm 100 dia mm 200 dia mm 250 dia mm 300 dia mm 350 dia mm 400 dia mm 450 dia mm 500 dia mm 600 dia mm 700 dia mm 750 dia mm 800 dia mm 900 dia mm 1000 k 9 size dia mm 100 dia mm 200 dia mm 250 dia mm 300 dia mm 350 dia mm 400 dia mm 450 dia mm 500 dia mm 600 dia mm 700 dia mm 750 dia mm 800 dia mm 900 dia mm 1000 m 1869 supplying labours tools and tackles for testing of lead ci or upvc or hdpe or ac or di pressure pipe upto 60 m head of water all complete as per specification direction ei. dia mm 300 dia mm 350 dia mm 400 dia mm 450 dia mm 500 dia mm 600 dia mm 700 dia mm 750 dia mm 800 dia mm 900 dia mm 1000 m 1870 providing and supplying isi standard d.i. specials & fitting with sealing rubber gasket of s.b.r. complete with cast iron follower gland and m.s. nut & bolts coated or otherwise protected from rusting and suitable for d.i. pipes including cost of all labours and materials and transportation to stores /site,loading, unloading including all taxes,etc.complete as per i.s.9523@ 2% m 1871 providing double flanged sluice valve confirming for is 2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all transportation etc. complete. sluice valve pn 1.6 dia mm 300 dia mm 350 dia mm 400 dia mm 450 dia mm 500 dia mm 600 dia mm 700 dia mm 750 dia mm 800 dia mm 900 dia mm 1000 m 1872 providing and supplying air valves as per is 10845 2000 and standard specifications of approved make and quality of following diameters including all taxes (central and local), railway freight,inspection charges,unloading from railway wagons,loading into truck, transportation up to departmental stores/site unloading and stacking etc. complete. 100 mm dia. 150 mm dia. 250 mm dia. 300 mm dia. m 1873 supplying labours ,tools,tackles lubricant etc for laying and jointing di/ c.i.s/s tyton pipes (class la) trenche supplying rubber gasket (rubber gaskets confirming to i.s.s. 5382 1969) and making gasket joints including providing night guard,barrier and red light to safe guard against accident,all complete (pipe to be supplied departmentally free of cost) as per (i.s.s.3114 1985)as per design,specification and direction of e./i. dia mm 200 dia mm 250 dia mm 300 dia mm 350 dia mm 400 dia mm 450 dia mm 500 dia mm 600 dia mm 700 dia mm 750 dia mm 800 dia mm 900 dia mm 1000 m 1874 lowering,laying and fixing in proper alignment and position all types of c.i.air valves as directed by engineer –in–charge including cost of conveyance from store to site of work,cost of all material and giving satisfactory hydraulic testing etc.complete.(for all class of valves). 100 mm dia. 150 mm dia. 250 mm dia. 300 mm dia. m 1875 supplying labourand tools for fixing c.i.sluice valve in trenches with a pair of c.i.tail piece including making lead caulked joints and flanged joints as per i.s.s. specification, including supplying all jointing materials (pig lead confirming to i.s.s. 782 1978,yarn confirming to i.s.s. 6587–1972 and nuts and bolts confirming to i.s.s.1364 –1983) including drilling holes in flanges if required as per specification and direction of e/i. dia mm 200 dia mm 250 dia mm 300 dia mm 350 dia mm 400 dia mm 450 dia mm 500 dia mm 600 dia mm 700 dia mm 750 dia mm 800 dia mm 900 dia mm 1000 m 1876 supply all materials & construction of thrust block where required. hdpe pipe m 1877 providing and supplying high density polyethyene pipe (hdpe pipe) of 20 mm to 225 mm od and pressure 6.0 kg/cm2 and 10 kg/cm2 suitable ford water supply which is available in all standard, like isi 4984, iso 4427 din 8074 and various grades like pe 63, pe 80, pe 100 and newly invented pe 100+ materials rates are exfactory excluding transpotation, taxes and duties, contractor profit and overhead charges.(for hdpe pipe grade pe 100,pn 10.) 110 mm dia (hdpe) 125 mm dia (hdpe) 140 mm dia (hdpe) 160 mm dia (hdpe) 180 mm dia (hdpe) 200 mm dia (hdpe) 225 mm dia (hdpe) 250 mm dia (hdpe) 280 mm dia (hdpe) m 1878 supplying labours tools and tackles for testing of lead ci or upvc or hdpe or ac or di pressure pipe upto 60 m head of water all complete as per specification direction ei. 110 mm dia (hdpe) 125 mm dia (hdpe) 140 mm dia (hdpe) 160 mm dai (hdpe) 180 mm dia (hdpe) 200 mm dia (hdpe) 225 mm dia (hdpe) 280 mm dia (hdpe) 400 mm di k 7 m 1879 supplying labours , tools tackles ,lubricant etc for laying and jointing di/c.i.s /s tyton pipes (class la) trenches supplying rubbber gasket ( rubber gasket confirming to i.s.s 5382 1969 ) and making gasket joints including providing night guard , barrier and red light to safe guard against accident all complete laying of pipes is to be done as per ( i.s.s 3114 1985 ) as per design , specification and direction of e /i 110 mm dia (hdpe) 125 mm dia (hdpe) 140 mm dia (hdpe) 160 mm dai (hdpe) 180 mm dia (hdpe) 200 mm dia (hdpe) 225 mm dia (hdpe) 280 mm dia (hdpe) 400 mm di k 7 m 1880 labour charge for one cutting of cast iron/di pipe & specials including supplying ,necessary tools and plants ,chipping or filling the surface finish as per specification and direction of e/i. 110 mm dia (hdpe) 125 mm dia (hdpe) 140 mm dia (hdpe) 160 mm dai (hdpe) 180 mm dia (hdpe) 200 mm dia (hdpe) 225 mm dia (hdpe) 280 mm dia (hdpe) 400 mm di k 7 m 1881 providing double flanged sluice valve confirming for is 2906/14846 including worm gear arrangements as per test pressure satainless steel , spindle , caps including all transportation etc. complete.(pn 1 without byepass arrangement.) 110 mm dia (hdpe) 125 mm dia (hdpe) 140 mm dia (hdpe) 160 mm dai (hdpe) 180 mm dia (hdpe) 200 mm dia (hdpe) 225 mm dia (hdpe) 280 mm dia (hdpe) 400 mm di k 7 m 1882 supplying labour and tools for fixing ci sluice valve trenches with a pair of c.i tail pair including making ) flanged joints as per is specification confirming to i.s.s 782 1978 confirming to i.s.s 6557 1972 and nuts and bolts confirming to i.s.s 1364 1983 ). including drilling holes in flanged if required as per specification and direction of e/i . 110 mm dia (hdpe) 125 mm dia (hdpe) 140 mm dia (hdpe) 160 mm dai (hdpe) 180 mm dia (hdpe) 200 mm dia (hdpe) 225 mm dia (hdpe) 280 mm dia (hdpe) 400 mm di k 7 ...

East Central Railway - Jharkhand

33018470 supply of servo system 68 (enklo 68/hydral 68) in 210 ltrs barrel confirming to stander ces 20078, make ioc/hp/bpclservo system 68 (enklo 68/hydral 68) in 210 ltrs barrel confirming to stander ces 20078, make ioc/hp/bpcl,servo system 68 (enklo 68/hydral 68) in 210 ltrs barrel confirming to stander ces 20078, make ioc/hp/bpcl sse/trd/s&w/ecr/dhn , jharkhand 1050.00 litre...

Tata Steel Limited - Jharkhand

33001172 auction sale of jul22mwo01 rejected mix waste oil with coolant , water and sludge in barrel (in as is where is condition.) no decanting allowed. stock total qty 12000 kg...

South Eastern Railways - Jharkhand

32986632 auction sale of [ 1 ] lot no 01 / 21 22, desc old, rusted, pitted and perforated empty steel barrels [ approx weight 1000 kg ] , qty 50 nos....

Bharat Coking Coal Limited - Jharkhand

32890389 repairing of bucket cylinder eye both sides cracks in eyes end repairing of holes of barrel for proper fitment of bolts, crack in barrel end for be1000 hydraulic shovel sl. no. g10123 at docp kusunda area ...

Ministry Of Power - Jharkhand

32721612 bids are invited for four seater mgr , dustbin , double arc swing , multi seater see saw , roto straight slide 5 feet , multi activity play eqipment 2 , walking barrel , roto frp wave slide1.5m , park bench , loop rung , simply go round total quantity : 38...

Bharat Coking Coal Limited - Jharkhand

32542612 repairing of sub assly barrel loader and related parts of repairing of sub assly barrel loader and related parts of rec 750e drill sl.no. 502 at abocp mine...

Damodar Valley Corporation - Jharkhand

32534966 bids are invited for 1 seal kit set1 2 seal kit set2 3 seal kit set3 4 seal kit set4 5 seal kit set5 6 seal kit set6 7 seal kit set7 8 seal kit set8 9 seal kit set9 10 seal kit set10 11 seal kit set11 12 power cylinder bucket 1 13 power cylinder bucket 2 14 pu tube 15 ball valve 16 connector for connection in pu tube 17 t connector for fluidizing blower & pu tube 18 temperature controller 19 panel fan, 20 mcb 21 led module indicator for panel cut out ( pilot light ) 22 black push button for remote 23 silo remote with ( 3no+ 2nc ) contacts . 24 power supply ( smps ) , 25 smps for compressor 26 diode oring 27 lockable emergency stop push button , 28 door oparated switch, 29 piston rod seal wiper 30 piston rod seal wiper of ash slurry pump discharge cylinder 1 31 piston rod seal wiper of ash slurry pump discharge cylinder 2 32 piston rod seal wiper of ash slurry pump discharge cylinder 3 33 piston rod seal wiper of ash slurry pump discharge cylinder 4 34 piston rod seal wiper of ash slurry pump discharge cylinder 5 35 piston rod seal wiper of ash slurry pump discharge cylinder 6 36 piston rod seal wiper of ash slurry pump discharge cylinder 7 37 piston rod seal wiper of ash slurry pump discharge cylinder 8 38 barrel for powercylinder 1 39 barrel for powercylinder 2 40 barrel for powercylinder 3 auto extension if any seller submits price in last 15 minutes, the rawill be auto extended by 15 minutes. ( for anunlimited time ) total quantity : 1...

Drinking Water And Sanitation Department - Jharkhand

32534073 e quotation for rate of materials for schedule rate jharkhand under d w and s division, medininagar 2022 23.= 1 polythene water storage tank of mark ( e.g sintex / sinter / himgiri / gangotietc ) with cover and locking system. ( m079 ) 2 gi pipe 50 mm dia ( tata or equivalent make ) ( m193 ) 3 jute ( m337 ) 4 g.m. ferrules ( m922 ) 5 ( i ) 8 mm dia wt. not less than 400 gms 6 ( ii ) 10 mm dia wt. not less than 400 gms 7 ( iii ) 15 mm dia wt. not less than 400 gms 8 ( iv ) 20 mm dia wt. not less than 600 gms 9 ( v ) 25 mm dia wt. not less than 900 gms 10 stop cocks ( m923 ) 11 ( i ) 15 mm brass stop cock wt. not less than 300 gms 12 ( ii ) 20 mm brass stop cock wt. not less than 400 gms 13 ( iii ) 25 mm brass stop cock wt. not less than 575 gms 14 ( iv ) 32 mm brass stop cock wt. not less than 850 gms 15 ( v ) 40 mm brass stop cock wt. not less than 1.15 kg 16 ( vi ) 50 mm brass stop cock wt. not less than 2.15 kg 17 ( vii ) 15 mm dia c.i. body brass working part stop cock. 18 ( viii ) 20 mm dia c.i. body brass working part stop cock. 19 ( ix ) 25 mm dia c.i. body brass working part stop cock. 20 g.m. full way valve ( m924 ) 21 ( i ) 15 mm dia wt. not less than 300 gms without wheel 22 ( ii ) 20 mm dia wt. not less than 400 gms without wheel 23 ( iii ) 25 mm dia wt. not less than 500 gms without wheel 24 ( iv ) 32 mm dia wt. not less than 700 gms without wheel 25 ( v ) 40 mm dia wt. not less than 1.0 kg without wheel 26 ( vi ) 50 mm dia wt. not less than 1.4 kg without wheel 27 ( vii ) 65 mm dia wt. not less than 1.8 kg without wheel 28 ( viii ) 80 mm dia wt. not less than 2.5 kg without wheel 29 g.m. non return valve verticle ( m925 ) 30 ( i ) 15 mm dia wt. not less than 150 gms 31 ( ii ) 20 mm dia wt. not less than 250 gms 32 ( iii ) 25 mm dia wt. not less than 375 gms 33 ( iv ) 32 mm dia wt. not less than 600 gms 34 ( v ) 40 mm dia wt. not less than 700 gms 35 ( vi ) 50 mm dia wt. not less than 1.0 kg 36 ( vii ) 65 mm dia wt. not less than 1.20 kg 37 ( viii ) 80 mm dia wt. not less than 1.50 kg 38 ( ix ) 100 mm dia wt. not less than 1.80 kg 39 g.m. non return valve horizontal ( m926 ) 40 ( i ) 15 mm dia wt. not less than 150 gms 41 ( ii ) 20 mm dia wt. not less than 250 gms 42 ( iii ) 25 mm dia wt. not less than 375 gms 43 ( iv ) 32 mm dia wt. not less than 600 gms 44 ( v ) 40 mm dia wt. not less than 700 gms 45 ( vi ) 50 mm dia wt. not less than 1.0 kg 46 ( vii ) 65 mm dia wt. not less than 1.20 kg 47 ( viii ) 80 mm dia wt. not less than 1.50 kg 48 ( ix ) 100 mm dia wt. not less than 1.80 kg 49 cocks ( m927 ) 50 ( i ) 15 mm dia g.m. bib cock wt. not less than 300 gms 51 ( ii ) 15 mm dia brass bib cock wt. not less than 400 gms 52 ( iii ) 15 mm dia c.i. bib cock wt. not less than 400 gms 53 ( iv ) 15 mm dia c.i. body brass working part spray painted bib cock wt. not less than 400 gms 54 ( v ) 15 mm dia c.i. brass pillar cock cock wt. not less than 400 gms 55 ( vi ) 15 mm c.i. plug cock ordinary 56 ( vii ) 15 mm c.i. push cock ordinary 57 chromium plated brass fittings ( m928 ) 58 ( i ) c.p. shower rose 100 mm dia 59 ( ii ) c.p. shower rose 125 mm dia 60 ( iii ) p.v.c. shower rose 150 mm dia 61 ( iv ) p.v.c shower rose 125 mm dia 62 connection pipe ( m929 ) 63 ( i ) 15 mm dia x 30 cm. long lead connection pipe with brass fittings. 64 ( ii ) 15 mm dia x 45 cm. long lead connection pipe with brass fittings. 65 ( iii ) 15 mm dia x 30 cm. long pvc connection pipe with brass fittings. 66 ( iv ) 15 mm dia x 45 cm. long pvc connection pipe withbrass fittings. 67 g.i. fittings ( conforming to i.s. 1879 ) isi marked ( m930 ) 68 [ a ] g.i. bend 69 ( i ) 15 mm 70 ( ii ) 20 mm 71 ( iii ) 25 mm 72 ( iv ) 32 mm 73 ( v ) 40 mm 74 ( vi ) 50 mm 75 ( vii ) 65 mm 76 ( viii ) 80 mm 77 ( ix ) 100 mm 78 ( x ) 125 mm 79 ( xi ) 150 mm 80 [ b ] elbow of the following sizes 81 ( i ) 15 mm 82 ( ii ) 20 mm 83 ( iii ) 25 mm 84 ( iv ) 32 mm 85 ( v ) 40 mm 86 ( vi ) 50 mm 87 ( vii ) 65 mm 88 ( viii ) 80 mm 89 ( ix ) 100 mm 90 ( x ) 125 mm 91 ( xi ) 150 mm 92 [ c ] tee plain of the following sizes 93 ( i ) 15 mm 94 ( ii ) 20 mm 95 ( iii ) 25 mm 96 ( iv ) 32 mm 97 ( v ) 40 mm 98 ( vi ) 50 mm 99 ( vii ) 65 mm 100 ( viii ) 80 mm 101 ( ix ) 100 mm 102 ( x ) 125 mm 103 ( xi ) 150 mm 104 [ d ] reducing tee plain of the following sizes ( taking larger dimension ) 105 ( i ) 20 mm 106 ( ii ) 25 mm 107 ( iii ) 32 mm 108 ( iv ) 40 mm 109 ( v ) 50 mm 110 ( vi ) 65 mm 111 ( vii ) 80 mm 112 ( viii ) 100 mm 113 ( ix ) 125 mm 114 ( x ) 150 mm 115 [ e ] socket plain of the following size ( taking larger dimension ) 116 ( i ) 15 mm 117 ( ii ) 20 mm 118 ( iii ) 25 mm 119 ( v ) 40 mm 120 ( vi ) 50 mm 121 ( vii ) 65 mm 122 ( viii ) 80 mm 123 ( ix ) 100 mm 124 ( x ) 125 mm 125 ( xi ) 150 mm 126 [ f ] reducing socket plain of the following sizes ( taking larger dimension ) 127 ( i ) 20 mm 128 ( ii ) 25 mm 129 ( iii ) 32 mm 130 ( iv ) 40 mm 131 ( v ) 50 mm 132 ( vi ) 65 mm 133 ( vii ) 80 mm 134 ( viii ) 100 mm 135 ( ix ) 125 mm 136 ( x ) 150 mm 137 [ g ] union socket of the following sizes 138 ( i ) 15 mm 139 ( ii ) 20 mm 140 ( iii ) 25 mm 141 ( iv ) 32 mm 142 ( v ) 40 mm 143 ( vi ) 50 mm 144 ( vii ) 65 mm 145 ( viii ) 80 mm 146 ( ix ) 100 mm 147 ( x ) 125 mm 148 ( xi ) 150 mm 149 [ h ] plugs of the following sizes 150 ( i ) 15 mm 151 ( ii ) 20 mm 152 ( iii ) 25 mm 153 ( iv ) 32 mm 154 ( v ) 40 mm 155 ( vi ) 50 mm 156 ( vii ) 65 mm 157 ( viii ) 80 mm 158 ( ix ) 100 mm 159 ( x ) 125 mm 160 ( xi ) 150 mm 161 [ i ] jam nuts of the following sizes 162 ( i ) 15 mm 163 ( ii ) 20 mm 164 ( iii ) 25 mm 165 ( iv ) 32 mm 166 ( v ) 40 mm 167 ( vi ) 50 mm 168 ( vii ) 65 mm 169 ( viii ) 80 mm 170 ( ix ) 100 mm 171 ( x ) 125 mm 172 ( xi ) 150 mm 173 [ j ] g.i. nipple of the following sizes 174 ( i ) 15 mm dia x 100 mm long 175 ( ii ) 20 mm dia x 100 mm long 176 ( iii ) 25 mm dia x 100 mm long 177 ( iv ) 32mm dia x 100 mm long 178 ( v ) 40 mm dia x 100 mm long 179 ( vi ) 50 mm dia x 100 mm long 180 ( vii ) 65 mm dia x 100 mm long 181 ( viii ) 80 mm dia x 100 mm long 182 ( ix ) 100 mm dia x 100 mm long 183 [ k ] g.i. pipes midium ( tata mark ) or equivalent as per is 1239 ( part 01 ) / 2004 isi marked / medium quality 184 ( i ) 15 mm dia 185 ( ii ) 20 mm dia 186 ( iii ) 25 mm dia 187 ( iv ) 32 mm dia 188 ( v ) 40 mm dia 189 ( vii ) 65 mm dia 190 mirrors ( m931 ) 191 ( a ) mirror of 6 mm thick plain glass 600 mm x 450 mm beveled edge mirror includingc.p. brass revolving fittings 3 mm plywood boardand c.p. hinges etc.to fix the mirror 192 ( b ) do 450 mm x 300 mm do 193 ( a ) glass shelf 600 mm x 125 mm with c.p. brass rail ( m932 ) 194 ( b ) do 450 mm x 125 mm do 195 ( a ) c.p. brass towel rail 20 mm x 600 mm with bracket all complete ( m933 ) 196 ( b ) anodized aluminum 20 mm x 600 mm towel rail complete with brackets 197 c.p. brass soap dish medium quality with screw andhinges etc. ( m934 ) 198 c.p. liquid soap solution holder ( m935 ) 199 vitreous white glazed indian water closet of hindustan / parry ware / cera / naycer or anyotherequivalent make ( m936 ) 200 ( a ) 580 mm long 201 ( b ) 510 mm long 202 ( c ) 450 mm long 203 ( d ) 510 mm long white glazed fiber i.w.c 204 pair of vetreous white glazed foot rest of hindustan / parryware / cera / naycer or any other equivalent make ( m937 ) 205 15 liters capacity pull and let go high level c.i. cistern complete with ball cock and a pair of bracket ( m938 ) 206 ( a ) 12.5 liters lowdown c.i. cistern ( m939 ) 207 ( b ) 10.0 liters capacity p.v.c. low design cistern 208 ( a ) white glazed vitreous e.w.c with p trap orany other equivalent make. ( m940 ) 209 ( b ) e.w.c with s trap 400 mm high of hindustan / parry ware / cera / naycear or any other equivalent make 210 ( c ) black / white plastic seat for e.w.c do as above. 211 ( a ) white glazed vitreous earthen were urinal flat back of hindustan / parryware / cera / naycer or any other equivalent make 600 mm x 350 mm size. ( m941 ) 212 ( b ) do squatting small 450 mm x 350 mm 213 ( c ) do squatting large 600 mm x 350 mm 214 ( d ) white glazed vitreous earthen ware urinal standing corner size 600 mm x 350 mm hindustan / parryware / cera / naycer or any other equivalent make 215 ( e ) partition plate for urinal 25 x 13 size 216 ( f ) 5 liters c.i. automatic cistern with all p.v.c fittings 217 white glazed vitreous wash hand basin 550 mm x 400mm size of hindustan / parryware / cera / naycer or any otherequivalent make. ( m942 ) 218 white glazed vitreous earthen ware kitchensinks of hindustan / parryware / cera / nayceror any other equivalent make ( m943 ) 219 ( a ) kitchen sink 600 mm x 450 mm x 200 mm ( 24 x 18 x 8 ) 220 ( b ) kitchen sink 600 mm x 450 mm x 250 mm ( 24 x 18 x 10 ) 221 ( c ) lab sink 450 mm x 300 mm x 150 mm ( 18 x 12 x 6 ) 222 ( d ) lab sink 300 mm x 250 mm x 150 mm ( 12 x 10 x 6 ) 223 drain board. ( m944 ) 224 ( a ) 600 mm x 450 mm ( 24 x 18 ) 225 ( b ) 525 mm x 450 mm ( 21 x 18 ) 226 h.c.i. pipes ( m945 ) 227 ( a ) 50 mm dia single socket 6 0 ( with ear weight 13 kg ) 228 ( b ) 80 mm dia single socket 6 0 ( with ear weight 18 kg ) 229 ( c ) 100 mm dia single socket 6 0 ( with ear weight 23 kg ) 230 ( d ) 150 mm dia single socket 6 0 ( with ear weight 30 kg ) 231 ( e ) 50 mm dia double socket 6 0 ( with ear weight 14 kg ) 232 ( f ) 80 mm dia double socket 6 0 ( with ear weight 19 kg ) 233 ( g ) 100 mm dia double socket 6 0 ( with ear weight 25 kg ) 234 ( h ) 150 mm dia double socket 6 0 ( with ear weight 13 kg ) 235 ( i ) 50 mm dia single socket 3 0 ( with ear weight 7.25 kg ) 236 ( j ) 80 mm dia single socket 3 0 ( with ear weight 10.5 kg ) 237 ( k ) 100 mm dia single socket 3 0 ( with ear weight 13.75 kg ) 238 ( l ) 150 mm dia single socket 3 0 with ear 239 ( m ) 50 mm dia single socket 2 0 ( with ear weight 5.35 kg ) 240 ( n ) 80 mm dia single socket2 0 ( with ear weight 8.00 kg ) 241 ( o ) 100 mm dia single socket 2 0 ( with ear weight 10.10 kg ) 242 ( p ) 150 mm dia single socket 2 0 with ear 243 ( q ) 50 mm dia single socket 1 0 ( with ear weight 3.4 kg ) 244 ( r ) 80 mm dia single socket 1 0 ( with ear weight 5.50 kg ) 245 ( s ) 100 mm dia single socket 1 0 ( with ear weight 7.60 kg ) 246 ( t ) 150 mm dia single socket 247 h.c.i. fittings. ( m946 ) 248 ( i ) plain bend of following size 249 ( a ) 50 mm dia ( weight without ear and socket 2.75 kg ) 250 ( b ) 80 mm dia ( weight without ear and socket 3.5 kg ) 251 ( c ) 100 mm dia ( weight without ear and socket 4.5 kg ) 252 ( d ) 150 mm dia ( weight without ear and socket 4.5 kg ) 253 ( ii ) bend with door with following size 254 ( a ) 50 mm dia ( wight without ear and socket 2.75 kg ) 255 ( b ) 80 mm dia ( wight without ear and socket 4.00 kg ) 256 ( c ) 100 mm dia do 5.5 kg 257 ( d ) 150 mm dia do 258 ( iii ) single junction with door of followings sizes. 259 ( a ) 50 mm dia ( weight without ear and socket 3.75 kg ) 260 ( b ) 80 mm dia ( weight without ear and socket 6.50 kg ) 261 ( c ) 100 mm dia do 9.50 kg 262 ( d ) 150 mm dia do 263 ( iv ) double junction with door of following sizes. 264 ( a ) 50 mm dia do 4.5 kg 265 ( b ) 80 mm dia do 7.00 kg 266 ( c ) 100 mm dia do 13.00 kg 267 ( d ) 150 mm dia do 268 ( v ) heel rest bend of following sizes 269 ( a ) 50 mm dia 270 ( b ) 80 mm dia 271 ( c ) 100 mm dia 272 ( d ) 150 mm dia 273 ( vi ) cowel of following sizes 274 ( a ) 50 mm dia ( weight without ear and socket 2.25 kg ) 275 ( b ) 80 mm dia ( weight without ear and socket 3.25 kg ) 276 ( c ) 100 mm dia ( weight without ear and socket 3.25 kg ) 277 ( d ) 150 mm dia do 278 ( vii ) 100 mm dia p trap ( wt without ear and socket ) 8.5 kg 279 ( viii ) 100 mm dia p trap ( wt without ear and socket ) 8.8 kg 280 ( ix ) 100 mm x 80 mm floor trap ( weight without ear and socket ) 4.00 kg 281 ( x ) pass over 50 mm x 150 mm for 50 mm projection 282 ( xi ) do 100 mm x 150 mm for 100 mm projection 283 ( xii ) inverted junction single 100 mm x 50 ( weight without ear and socket ) 9.0 kg 284 ( xiii ) inverted junction double 100 mm x 50 mm x 50 mm ( weight without ear and socket ) 12.0 kg 285 ( xiv ) h.c.i. offset 80 mm projection of the following size 286 ( a ) 50 mm dia ( weight without ear and socket ) 2.75 kg 287 ( b ) 80 mm dia do 3.50 kg 288 ( c ) 100 mm dia do 5.00 kg 289 ( d ) 150 mm dia do 290 ( xv ) h.c.i. socket of following sizes 291 ( a ) 50 mm dia ( weight without ear ) 1.50 kg 292 ( b ) 80 mm dia ( weight without ear ) 3.00 kg 293 ( c ) 100 mm dia ( weight without ear ) 4.50 kg 294 ( d ) 150 mm dia ( weight without ear ) do 295 c.i. cover with frame for manhole and inspection chamber. ( m947 ) 296 ( a ) 600 mm x 450 mm size ( wt. 39 kg ) 297 ( b ) 600 mm x 450 mm size ( wt. 25 kg ) 298 ( c ) 500 mm x 450 mm size ( wt. 25 kg ) 299 c.i. bracket pair for w.h.b. ( m948 ) 300 ( a ) 550 mm x 400 mm size ( 22 x 16 ) 301 ( b ) do for 12.5 liter cistern 302 ( c ) do for 600 mm x 450 mm ( 24 x 18 ) sink 303 ( d ) 40 mm x 60 mm ms plate bracket for sink as above 304 ( a ) 32 mm ( 1 1 / 4 ) c.p. brass waste for w.h.b ( m949 ) 305 ( b ) 40 mm ( 1 1 / 2 ) c.p. brass waste for w.h.b for sink 306 ( c ) 32 mm ( 1 1 / 4 ) c.p. waste of white metal 307 ( d ) 40 mm ( 1 1 / 2 ) c.p. waste of white metal 308 ( a ) 32 mm ( 1 1 / 4 ) p.v.c. waste pipe 750 mm long ( 26 long ) withbrass union for w h b ( m950 ) 309 ( b ) 40 mm ( 1 1 / 2 ) p.v.c. waste pipe 750 mm long ( 26 long ) with brass union for w h b 310 32 mm ( 1 1 / 4 ) p.v.c. telescopic flush pipe with brass union for high level cistern ( m951 ) 311 rubber inserttion 3 mm ( 1 / 8 ) thick ( m952 ) 312 pig lead ( m953 ) 313 yarn ( m954 ) 314 rubber gasket for c.i pipe of good quality ( m955 ) 315 ( a ) 80 mm 316 ( b ) 100 mm 317 ( c ) 125 mm 318 ( d ) 150 mm 319 ( e ) 200 mm 320 ( f ) 250 mm 321 ( g ) 300 mm 322 ( h ) 350 mm 323 ( i ) 400 mm 324 ( j ) 450 mm 325 ( k ) 500 mm 326 ( l ) 600 mm 327 ( m ) 700 mm 328 ( n ) 750 mm 329 ( o ) 800 mm 330 ( p ) 900 mm 331 ( q ) 1000 mm 332 ( r ) 1200 mm 333 cotton waste ( m956 ) 334 asbestos suta ( gland packing ) ( m957 ) 335 solvent cement ( m958 ) 336 hydrocloric acid ( sepecific gravity 1.20 ) ( m959 ) 337 cp & pvc fitting ( m960 ) 338 ( i ) 32 mm dia c.p. waste 339 ( ii ) 32 mm dia pv c waste pipe 750 mm long with coupling 340 ( iii ) 40 mm dia c.p. waste 341 ( iv 40 mm dia pvc waste pipe 750 mm long with coupling 342 ( v 100 mm dia steel jali 343 ( vi ) 15 mm dia c.p. nipple with coupling ( short pieces ) 344 ( vii ) 50 mm dia pvc pipe with coupling 345 special type of c.p. bath room fittings for v.i.p.buildings ( jal, jaquar, marc or equivalent mark ) ( m961 ) 346 ( i ) pillar cock ( isi ) 347 ( ii ) pillar cock ( long neck ) 348 ( iii ) bib cock ( isi ) 349 ( iv ) bib cock ( long thread ) 350 ( v ) angular stop cock 351 ( vi ) angular stop cock ( long thread ) 352 ( vii ) concealed stop cock reduce ( isi ) 353 ( viii ) concealed stop cock heavy duty extra adjustable wall flange 354 ( ix ) long body bib cock 355 ( x ) swan neck tap with left hand operating knob 356 ( xi ) central hole basin mixer ( best quality ) 357 ( xii ) wall mixer with telephonic shower arrangement 358 ( xiii ) wall mixer with provision for over head shower with elbow coupling and well flange 359 ( xiv ) wall mixer 3 in 1 system with provision for over head shower with elbow coupling and wall flange 360 ( xv ) sink mixer with swinging casted spout 361 ( xvi ) sink cock with swinging casted spout 362 ( xvii ) 4 way diverter for concealed fittings 363 ( xviii ) pressure adjustable shower with revolving joint 364 ( xix ) telephone shower with flexible pipe 365 ( xx ) flush cock with wall flange ( 25 mm ) 366 ( xxi ) towel rail 24 367 ( xxii ) towel ring 368 ( xxiii ) soap dish 369 ( xxiv ) tumbler holder 370 ( xxv ) toilet paper holder 371 ( xxvi ) glass shelf 22 372 ( xxvii ) corner glass shelf with bracket 373 ( xxviii ) flush valve complete with 32 mm size controlcock & flange 374 c.i special & pvc pipes ( m962 ) 375 1. c.i double shocketted fittings bend such as bend, tee, taper, 376 ( a ) 80 200 mm 377 ( b ) 250 700 mm 378 ( c ) 700 1000 mm 379 2. c.i double flange fittings such as tee, taper, tailpiece, bend etc 380 ( a ) 80 200 mm 381 ( b ) 250 700 mm 382 ( c ) 700 1000 mm 383 spare parts of hand pump 384 basic rate of upvc pipe 125mm dia conforming to i.s.i. latest revision is 12818 / 2016 cml no. 5543459 ( m1024 ) 385 rcc esr ( m1030 ) 386 designing ( aesthetically ) , and constructing rcc elevated service reservoirs of following capacity with rcc staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for esr having capacity upto 500 cum and not more than 6m c / c for esr having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the in side and out side face of the container and also plaster with plastic paint in all columns and bracingsincluding refilling disposing off the surplus stuff with in a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as m.s. ladder out side, stainless steel lader in contenor, c.i. manhole frame and covers, water level indicators, lightening conductor, g.i. pipe railing around walk way and top slab, providing stair case from ground level to roof level, m.s. grill gate of 2m height with locking arrangement of approved design, b.b. masonry chambers for all valves, ventilating shafts, providing and applying three coats of acrylie emulsion with silicon edditives paint to the structure incluingroof slab, epoxy painting to internal surface and anti termite treatment for under ground part soft he structure and giving satisfactory water tightness test as per i.s. code. the job to include painting then ame of the scheme and other details on thereservoir as per the directions of engineer in charge. 387 notes 388 the design of the structure be in accordance with relevant i.s. specification ( i.s. 3370 1965 or revised. ) 389 the design shall satisfy the stipulations as per i.s. 1893 1984 and i.s.13920 / 1993 for seismic force and i.s. 11682 / 1985 for r.c.c. staging of over head tanks. 390 for design having more than 6 columns, suitable bracing is obligatory. 391 plain round mild steel bars grade i conforming to i.s.432 part i orhigh yield strength deformed bars conforming to i.s. 1786 or i.s. 1139 shall beused, grade i imildsteel bars will not be allowed 392 irrespective of the type of foundation proposed in the design, one set of bracing be provided at the ground level. 393 these rates include providing m.s. ladder for e.s.r.s upto 2 lakh litres capacity and providing spiral stair case for e.s.r. above 2 lakh litres capacity. 394 staging shall have to bede signed with stresses of m 200 concrete for esr. however all rcc construction should be donein m 250. structures in contact with water shall be designed & casted in m 300 395 these rates are including the cost of up lift pressure if any and entire dewatering during execution. incase of water logging are a where water is struck at shallow depth, extra provision of dewatering shall be made as per site condition. 396 all conditions given in the member secretarys circular no. mjp / ts i / 350 / 1668 dt. 2 8 97 and mjp / s i / 350 / 2127 dt. 13 7 99 shall be strictly followed and additional cost, if any, due to these conditions is included in the rates mentioned below. 397 75 % part rate shall be payable for reinforcement concrete and plastering items of containers of e.s.r. till satisfactory hydraulic testing for water tightness is given; and till that work shall be treated as incomplete. 398 the rates indicated in the table are excluding the cost of pipes, specials and valves required for inlet, outlet, washout, overflow and bypass arrangement. the scope of work, however, includes cost of erecting, laying and jointing of pipe and valves including cost of jointing materials upto 5 m beyond outer face of outer most column ( cost of pipe, specials and valves is taken as 10% of the cost of esr as per table ) . 399 for esr upto 500 cum capacity c.i. double flanged pipes upto 300 mm dia shall be provided and c.i. specials shall be used. for esr above 500 cum capacity c.i. / m.s. pipe assembly with minimum 8 mm thickness upto 500 mm dia and minimum 10 mm thickness above 500 mm dia can be used with proper anti corrosive epoxy treatment from in side and out side. 400 below mentioned rates are for foundation swith individual footing with bearing capacity of 20 tonnes per square metre. for raft foundations, these rates shall be increased by 7.5% where safe bearing capacity ( sbc ) is 5 mt per sqm and by 5 % where sbc is more than 5mt / sqm and upto 10 mt / sqm. this % of5 % or 7. 5 % is applicable for estimation of amount of lumpsum item of esr. for extra item due to change from individual foundation to raft, actual increase in concrete and steel be paid as per relevant dsr item. 401 the rate shall be increased by 30 % for bearing piles upto depth of 10 m and for further increased in depth by 5 m each, it shall be increased by another 10%. these rates are applicable where raft is not feasible. for pile foundations sulphate resistant cement shall only beused. single pile for the column is not permitted, group of piles shall be designed with pile cap for each column of esr. 402 the rates are applicable for staging height of 12 m. these rates shall be increased or decreased for per metre variation in this staging height as below : 403 12 to 16 m staging 2% per metre 404 16 to 20 m staging 3% per metre 405 20 m and above 4% per metre 406 for 17 m staging height, percentage calculation will be like below : 407 12 to 16 m 4 x 2 = 8% 408 16 & 17 m 1 x 3% = 3% total = 11% 409 for 21 m staging height, percentage calculation will be like below : 410 12 to 16 m 4 x 2 = 8% 411 16 to 20 m 4 x 3% = 12% 412 20& 21 m 1 x 4% = 4% total = 24% 413 following rates are for seismic zone iii. for zone iv, these rates shall be increased by 5% and for zone ii, these rates shall be decreased by 5%. concerned executive engineer shall confirm the seismic zone for the scheme from seismic zone splan before estimation and adopt appropriate rates as per actual seismic zones. ( seismic maps attached in this csr ) . 414 notes 415 conditions from sr.no.1 to 10 shall form a part and parcel of the tender and must be included in the draft tender papers for works of r.c.c. e.s.r. 416 conditions from sr.no.11 to 16 are for estimation purpose only and shall not appear in the tender. 417 rates for rcc esrs 418 upto 25, 000 litres 419 cost of 25, 000 litres capacity 420 add for capacity above 25, 000 upto 50, 000 litres 421 cost of 50, 000 litres capacity 422 add for capacity above 50, 000 upto 75, 000 litres 423 cost of 75, 000 litres capacity 424 add for capacity above 75, 000 upto 1, 00, 000 litres 425 cost of 1, 00, 000 litres capacity 426 add for capacity above 1, 00, 000 upto 1, 50, 000 litres 427 cost of 1, 50, 000 litres capacity 428 add for capacity above 1, 50, 000 upto 2, 00, 000 litres 429 cost of 2, 00, 000 litres capacity 430 add for capacity above 2, 00, 000 upto 2, 50, 000 litres 431 cost of 2, 50, 000 litres capacity 432 add for capacity above 2, 50, 000 upto 3, 00, 000 litres 433 cost of 3, 00, 000 litres capacity 434 add for capacity above 3, 00, 000 upto 4, 00, 000 litres 435 cost of 4, 00, 000 litres capacity 436 add for capacity above 4, 00, 000 upto 5, 00, 000 litres 437 cost of 5, 00, 000 litres capacity 438 add for capacity above 5, 00, 000 upto 7, 50, 000 litres 439 cost of 7, 50, 000 litres capacity 440 add for capacity above 7, 50, 000 upto 10, 00, 000 litres 441 cost of 10, 00, 000 litres capacity 442 add for capacity above 10, 00, 000 upto 15, 00, 000 litres 443 cost of 15, 00, 000 litres capacity 444 add for capacity above 15, 00, 000 upto 20, 00, 000 litres 445 cost of 20, 00, 000 litres capacity 446 rcc gsr and sump ( m1031 ) 447 designing ( aesthetically ) , and constructing rcc ground service reservoirs / rcc sumps in m 300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top rcc roof slab / or dome, 20 mm thick cement plaster with water proofing compound in cm 1:3 proportion. to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 m, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye pass arrangement consisting of c.i. / m.s. d / f. pipes, specials and valves of given diameters, providing and fixing accessories such as m.s. ladder inside and outside, c.i. manhole frame and cover, water top slab, b.b. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per is code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. 448 anti –termite treatment shall be given for under ground portion of the structure. 449 notes 450 the design shall be in accordance with various relevant i.s. specification ( i.s.456 / 2000, i.s.875 1987, i.s.3370 1965 or revised. ) 451 only m.s. bars grade i conforming to i.s. 432 part i or high yield strength deformed bars conforming to i.s. 1786 or i.s.1139 shall be used.grade ii m.s. bars shall not be used. 452 entire structure shall be in m 300 only. 453 the scope of pipe assembly work shall be upto 5 metre beyond out side face of the wall, cost of pipes valves and specials is not included in the rate but labour cost for laying and jointing is included. 454 the g.s.r. / sump above 15 lakh litres capacity shall be in two compartment. 455 the job includes designing the structure for up lift pressure and dewatering if required during entire execution and disposal of surplus excavated stuff within lead of 50 metres as directed by engineer in charge. if up lifts considered in design, then these rates shall be increased by 7.5%. 456 g.s.r. outlets shall be with bell mouth of approved pattern in bottom slab and cost of designing bell mouth is included in the rate. sump well includes cost of suction pit required at bottom. 457 for pipe diameters upto 300mm only cipipes and ci specials shall be used. for pipe diameters above 300mm, m.s. pipes and specials minimum 10mm thick shall be used with proper anti corrosive epoxy treatment from inside and outside. 458 cost of pump house is not included in these rates. 459 above rates are applicable for seismic zones 2, 3 and 4. 460 75% part rate shall be payable for reinforcement, concrete and plastering items of all types of g.s.r. sand sump still satisfactory hydraulic testing for water tightness test is given and till that work shall be treated as incomplete. 461 10% shall be added for sump if over head pump house is proposed. 462 note: conditions from sr.no.1 to 11 shall form a part and parcel of tender and must be included in the draft tender papers for work of r.c.c .gsrs and sumps. 463 rates for rcc gsrs and sumps 464 upto 25, 000 litres 465 cost of 25, 000 litres capacity 466 add for capacity above 25, 000 upto 50, 000 litres 467 cost of 50, 000 litres capacity 468 add for capacity above 50, 000 upto 75, 000 litres 469 cost of 75, 000 litres capacity 470 add for capacity above 75, 000 upto 1, 00, 000 litres 471 cost of 1, 00, 000 litres capacity 472 add for capacity above 1, 00, 000 upto 1, 50, 000 litres 473 cost of 1, 50, 000 litres capacity 474 add for capacity above 1, 50, 000 upto 2, 00, 000 litres 475 cost of 2, 00, 000 litres capacity 476 add for capacity above 2, 00, 000 upto 3, 00, 000 litres 477 cost of 3, 00, 000 litres capacity 478 add for capacity above 3, 00, 000 upto 5, 00, 000 litres 479 cost of 5, 00, 000 litres capacity 480 add for capacity above 5, 00, 000 upto 10, 00, 000 litres 481 cost of 10, 00, 000 litres capacity 482 addforcapacityabove10, 00, 000upto15, 00, 000 litres 483 cost of 15, 00, 000 litres capacity 484 add for capacity above 15, 00, 000 litres 485 note: 10% shall be added over the cost of gsr for sump where over head pump house is proposed. 486 unconventionalwater treatment plant ( m1032 ) 487 designing ( aesthetically ) , providing and constructinghigh rate unconventionalwatertreatmentplant i.e. simplified water treatment plant consisting of civil works includingcostofprovidingandapplyingepoxypainttoinsidesurfaceofwaterretainingstructuresincontactwithchlorineandprovidinganti termitetreatmenttoentirestructurebelowgroundlevel, ceramic tiles for floring, acrylic emulsion with silicon additives paint from outside stainless steel railing, mechanicalandelectricalcomponentsofvarioussub worksasgivenbelow : includingnecessaryhydraulic testing, structuraltesting and trial for 3 months, etc. completeas directedbyengineer in charge ( turn key job ) works. 488 aeration fountain 489 inlet arrangements 490 mixing channel with ventury flume and flow measuring arrangement 491 inlet channel 492 flocculator conforming to i.s. 7208 1974 ( type c ) with detention period of 30 minutes 493 tube settlers designing, fabricating and constructing tube settlers with square or any other shaped tube like circular, cheveron, hexagonal etc .having proven performance 494 rapid sand gravity filters all valve shall be glandless. 495 filter house 496 chemical house 497 alum tanks 2nos. with mixing, carrying and dosing arrangements with piping. 498 100 kg chlorine cylender for capacity upto 5mld and chlorine tonner for capacity above 5 mld. 499 tcl solution tank with mixing, carrying and dosing arrangement with piping. 500 bypass arrangement 501 external and internal electrification 502 laboratory equipments 503 wash water tanks of capacity equal to12 minutes to wash specified number of filter beds at time at 600 lit / m2 / m under head of 12m at under drain. 504 wash water pumps with 100% standby 505 air blowers capable of delivering 600 lmp per square metre of free air of filter area at 0.4 kg / sqcm at the under drains ( 100 % standby ) .air blowers shall be adopted for wtp having capacity more than 3 mld only. below 3 mld capacity, air blowers shall not be adopted. 506 pure water sump of capacity equal to 1 hourpumping capacity. 507 pure water pump house over the sump / by the side of sump. 508 drainage arrangements 509 alum store 510 sanitary block with necessary water supply and drainage arrangements and internalwbm roads. 511 these rates are applicable for seismic zones 2, 3 and 4. 512 rates given below are inclusive of uplift pressure if any and dewatering during the entire work. 513 all rcc structures shall be constructed in m 250. structures in contact with water shall be in m 300. 514 unconventional treatment plants less than 1 mld capacity shall not be constructed. 515 all the structural steel works / fabrications are to be provided with application of hot dip zinc coating according to specification as per is 4759:1996 ( reafirmed 2006 ) . 516 note: conditions from sr. no. 1 to 28 shall form a part and parcel of the tender and must be included in draft tender papers for the work of unconventional treatment plants. 517 unconventional water treatment plant 518 fixed cost for 1 mld 519 add for capacity above 1 mld upto 2 mld 520 cost of 2 mld treatment plant 521 add for capacity above 2 mld upto 3 mld 522 cost of 3 mld treatment plant 523 conventionalwater treatment plant ( m1033 ) 524 designing ( aesthetically ) , providingconstructingandcommissioningconventionalwatertreatmentplantconsistingofallcivil, mechanicalandelectricalworks includingcostofprovidingandapplyingepoxypainttoinsidesurfaceofwaterretainingstructuresincontactwithchlorineandprovidingantitermitetreatmenttoentirestructurebelowgroundlevel, mechanicalandelectricalcomponentsofvarioussub worksasgivenbelow, includingnecessaryhydraulic testing, structuraltesting, equipmenttestingandtrialrunfora periodof3 months, etc. completeas directedbyengineer in charge ( turn key job ) . 525 aeration fountain plan are a not less than 0.625 square metre per mld 526 ventury flume with necessary devices, consisting of simple mechanical indicator. ( pedestal type gauge ) 527 flash mixer rapid mixing device, detention time 60 seconds to give velocity gradient 300 to 400 sec 1, vane mixer type conforming to i.s. 7090 of 1985. 528 flocculator – conforming to i.s.7208 1974 ( type c ) with detention period of 30 minutes. 529 clarifier horizontal flow circular tank, detention period 2 5 hours, overflow rate 30 cubic metre per square metre per day ( to be specified ) , weir loading not more than 300 cubic metre per metre per day, with mechanical sludge scraper conforming to i.s. no. 10313 1982. 530 rapid sand filter sand filter house filter designed for filteration rate of 5, 000 litres per square metre per hour, minimum 2 beds for plant upto 10 mld, for larger plants as specified, filters to be located in filter house with roof slab, pipe gallery and platform minimum 5.5 metre in width. 531 filtersand effective size 0.45 to 0.70mm, uniformity coefficient not more than 1.7, nor less than 1.3, depth of water over sand 0.75m, free board 50cm, gravel 0.45m in depth, sand and gravel conforming to i.s. 8491 ( i ) 77, back wash by air wash, stand ard appurtenances ( to be specified ) , rate of flow controller, filter gauge, sand expansion gauge, etc. 532 wash water tank capacity to be specified and suitable to supply water to wash 2 filter units at a time where the units are 4 or more. 533 wash water pumps capacity to fill water tank in 1 hour with 100% standby. 534 air blowers capable of delivering 600 lmp per square metre of free air, of filter area at 0.4kg / sqcm at the under drains ( 100% standby ) . 535 chemical house in two storeys 536 ground floor to accommodate 7 days alum requirement and sundry storage. 537 first floor to accommodate alum and lime tanks.etc. 538 solution tanks minimum 3 tanks ( one for preparation, second for dosing and third as standby ) , each tank capable of giving 8 hours maximum dose without interruption, minimum free board 0.30m, trays for dissolving, level indicator, mechanical agitation devices, solution feed and drain lines, solution feed device ( constant head device, strength of solution upto 10% only ) conforming to i.s. 9222 part i 1979. 539 pure water sump and sump house. 540 capacity of sump – one hour of designed flow. 541 pump house pump house of required size over the sump or by the side. 542 store house suitable for alum storage of three months requirement in monsoon with 10% extra capacity for other sundry articles. 543 vacuum feed type chlorinators make tobe approved by mjp. 544 conforming to i.s. 10533 a part ii 1983 545 rate for withdrawal 546 temperature kg. of chlorine discharge degree c per day ( cylinders ) 547 45 67 tonnes 548 10 6.359.50 110 549 15 10.75 16.10130 550 20 14.50 21.24254 551 27&above18.70 28.12315 552 chlorinator equipment and container room to conform to i.s. 10553 part i 1983. 553 100% standby shall be provided. 554 by pass arrangements c.i. or m.s. pipes. 555 disposal of waste from wtp: safe disposal arrangement to near by nala including cost of pipe 556 for wtp of capacity 30 mld and more additional arrangement for backwash water recycle shall be provided, including sump, pupming machinary, rising main etc complete 557 drainage arrangements – rcc pipes up to plot boundary. 558 electrical installation – both internal and external including entire plant area. 559 laboratory equipment –as per requirement ( to be specified during tendering ) . 560 sanitary blocks – carpet area 15 square metre minimum upto 25 mld and 25 square metre above 25 mld. 561 administrative block and internal road to accommodate office room, chlorine room, laboratory room, panel board room, blower room etc. and wbm road to connect all units from main gate of plot. 562 rates given below are inclusive of up lift pressure if any and dewatering during entire work. 563 all pipes condutes channels with20%overloading 564 these rates are applicable for seismic zones 2, 3 and 4. 565 all rcc structures shall be constructed in m 300. 566 note: conditions from sr. no. 1 to 22 shall form a part and parcel of the tender and must be incorporated in draft tender papers of conventional treatment plants ( proposed ) . 567 conventional water treatment plant 568 above3 mld to upto 5 mld 569 cost of 5 mld treatment plant 570 add for capacity above 5mld upto 10 mld 571 cost of 10 mld treatment plant 572 add for capacity above 10 mld upto20 mld 573 cost of 20 mld treatment plant 574 add for capacity above 20 mld upto 50 mld 575 cost of 50 mld treatment plant 576 add for capacityabove 50 mld upto 100 mld 577 cost of 100 mld treatment plant 578 add for capacity above 100 mld 579 gpt / hygpt : drilling by rotary drill machine of size 300mm & 400mm dia with t.c. drill bit for tubewells in all kinds of soil including moorum, hard soil, soil mixed with pebbles, shingles, compacted soil, clay, soft and decomposed rock etc, up to 60 meters depth including reaming to facilitate smooth lowering of casing pipe etc. as per specification and direction of e / i ( basic rates ) ( m1034 ) 580 300 mm dia for gpt 581 400 mm dia for hygpt 582 hydt : cost of drilling 200 mm x 165 mm x 125 meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic dth rig machine, all complete including supplying all materials, tools, drilling rig, air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicles up to the site ( basic rates ) ( m1035 ) 583 from 0 50 meter 584 from 51 125 meter 585 dt :basic rates for 125 / 115 mm dia drilled tube well for drilling in all kinds of soil and rock for installation of hand pump with dth rig machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125 / 115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and dirrection of engineer incharge ( basic rates ) ( m1037 ) 586 drillig upto 30 mtr depth below g. l. in rural area 587 drilling beyond 31 mtr upto 60 mtr below g. l. in rural area 588 trenchless ( m1038 ) 589 installation of product pipe by manual pipe jacking method including making of entry and exit pits all related civil works like excavation , shoring / strutting etc manual shielded excation , lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 590 from 900 mm to 1000 mm dia 591 in soft soil 592 in hard soil 593 in sandy soil 594 in stone soil 595 from 1000 mm to 1200 mm dia 596 in soft soil 597 in hard soil 598 in sandy soil 599 in stone soil 600 above 1200 mm to 1500 mm dia 601 in soft soil 602 in hard soil 603 in sandy soil 604 in stone soil 605 installation of product pipe by auger boring methodincluding making of entry and exit pits all related civil works like excavation , shoring / strutting etc shielded excavation , through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 606 upto 300 mm dia 607 in soft soil 608 in hard soil 609 in sandy soil 610 in stone soil 611 above300 mm to 450 mm dia 612 in soft soil 613 in hard soil 614 in sandy soil 615 in stone soil 616 above 450 mm to 600 mm dia 617 in soft soil 618 in hard soil 619 in sandy soil 620 in stone soil 621 above 600 mm to 900 mm dia 622 in soft soil 623 in hard soil 624 in sandy soil 625 in stone soil 626 installation of product pipe by guided auger boring methodincluding making of entry and exit pits all related civil works like excavation , shoring / strutting etc shielded excavation , through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 627 upto 300 mm dia 628 in soft soil 629 in hard soil 630 in sandy soil 631 in stone soil 632 above300 mm to 450 mm dia 633 in soft soil 634 in hard soil 635 in sandy soil 636 in stone soil 637 above 450 mm to 600 mm dia 638 in soft soil 639 in hard soil 640 in sandy soil 641 in stone soil 642 above 600 mm to 900 mm dia 643 in soft soil 644 in hard soil 645 in sandy soil 646 in stone soil 647 providing and supplying isi mark ci / d / f reflux valves ( non return valves ) of following dia inspection charges unloading from railway wagon , loading into truck transportation upto department stores / site unloading stacking etc. complete reflux valve as per is 5312 part i ( 1984 ) ( m1039 ) 648 without byepass arrangement pn 1 649 50 mm 650 65 mm 651 80 mm 652 100 mm 653 125 mm 654 150 mm 655 200 mm 656 250 mm 657 300 mm 658 350 mm 659 400 mm 660 450 mm 661 500 mm 662 600 mm 663 700 mm 664 750 mm 665 800 mm 666 900 mm 667 1000 mm 668 1100 mm 669 1200 mm 670 with byepass arrangement pn 1 671 50 mm 672 65 mm 673 80 mm 674 100 mm 675 125 mm 676 150 mm 677 200 mm 678 250 mm 679 300 mm 680 350 mm 681 400 mm 682 450 mm 683 500 mm 684 600 mm 685 700 mm 686 750 mm 687 800 mm 688 900 mm 689 1000 mm 690 1100 mm 691 1200 mm 692 without byepass arrangement pn 1.6 693 50 mm 694 65 mm 695 80 mm 696 100 mm 697 125 mm 698 150 mm 699 200 mm 700 250 mm 701 300 mm 702 350 mm 703 400 mm 704 450 mm 705 500 mm 706 600 mm 707 with byepass arrangement pn 1.6 708 50 mm 709 65 mm 710 80 mm 711 100 mm 712 125 mm 713 150 mm 714 200 mm 715 250 mm 716 300 mm 717 350 mm 718 400 mm 719 450 mm 720 500 mm 721 600 mm 722 providing double flange sluice valve ( size 50 mm to 1200 mm ) confirming for is 2906 / 14846 including worn gear arrangements as per test pressure stailess steel spindle , caps transportation etc. all complete . 723 with byepass arrangement pn 1 724 50 mm 725 65 mm 726 80 mm 727 100 mm 728 125 mm 729 150 mm 730 200 mm 731 250 mm 732 300 mm 733 350 mm 734 400 mm 735 450 mm 736 500 mm 737 600 mm 738 700mm 739 750 mm 740 800 mm 741 900 mm 742 1000 mm 743 1100 mm 744 1200mm 745 without byepass arrangement pn 1 746 50 mm 747 65 mm 748 80 mm 749 100 mm 750 125 mm 751 150 mm 752 200 mm 753 250 mm 754 300 mm 755 350 mm 756 400 mm 757 450 mm 758 500 mm 759 600 mm 760 700mm 761 750 mm 762 800 mm 763 900 mm 764 1000 mm 765 1100 mm 766 1200mm 767 providing double flange sluice valve confirming for is 2906 / 14846 including worn gearas per test pressure stailess steel spindle , caps transportation etc. all complete for rateincluding all taxes . . 768 without byepass arrangement pn 1.6 769 50 mm 770 65 mm 771 80 mm 772 100 mm 773 125 mm 774 150 mm 775 200 mm 776 250 mm 777 300 mm 778 350 mm 779 400 mm 780 450 mm 781 500 mm 782 600 mm 783 700mm 784 750 mm 785 800 mm 786 900 mm 787 1000 mm 788 1100 mm 789 1200mm 790 with byepass arrangement pn 1.6 791 50 mm 792 65 mm 793 80 mm 794 100 mm 795 125 mm 796 150 mm 797 200 mm 798 250 mm 799 300 mm 800 350 mm 801 400 mm 802 450 mm 803 500 mm 804 600 mm 805 design and supply of v wire screen laterals suitable for infiltration galleryas per site condition and detail provided end connection suitable flange excluding taxes and transportation . ( m1040 ) 806 dia 06 inch ( 150 mm ) 807 id 153 mm od 167 mm 808 screen thickness 07 mm 809 slot 1.00 mm 810 moc lowcarbon galvenised steel 811 length 5 mtr. 812 dia 08 inch ( 200 mm ) 813 id 205 mm od 221mm 814 screen thickness 08 mm 815 slot 1.00 mm 816 moc lowcarbon galvenised steel 817 length 5 mtr. 818 dia 10 inch ( 250 mm ) 819 id 256 mm od 276mm 820 screen thickness 10 mm 821 slot 1.00 mm 822 moc lowcarbon galvenised steel 823 length 5 mtr. 824 dia 12 inch ( 300 mm ) 825 id 306 mm od 326 mm 826 screen thickness 10 mm 827 slot 1.00 mm 828 moc lowcarbon galvenised steel 829 length 5 mtr. 830 dia 14 inch ( 350 mm ) 831 id 338 mm od 363 mm 832 screen thickness 12.5 mm 833 slot 1.00 mm 834 moc lowcarbon galvenised steel 835 length 5 mtr. 836 supplying all materials, labours, equipments for lowering 125mm dia blue upvc casing pipe as casing for protecting the sides from falling during the process of drilling all complete including carriage of materials to work site ( basic rate ) . ( m1041 ) 837 supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per dirction e / i ( basic rate ) . ( m1042 ) 838 supplying labour cement and calcium chloride or bentonite solution and equipments for grouting the casing pipe after lowering in the bore including carriage of materials to work site etc. all complete as per specification & direction of e / i ( basic rate ) . ( m1043 ) 839 supplying labour and equipments including 125mm dia g.i. cap and fitting and fixing over the casing pipe of tube well properly and taking it out as per direction e / i ( the cap will be the property of department ) ( basic rate ) . ( m1044 ) 840 supplying all materials, labours, equipments for constructing p.c.c. ( 1:2:4 ) circular platform around drilled tube well including 12mm thick cement plaster ( 1:4 ) with neat cement punning over exposed surface as per unicef design, etc. all complete including carriage of materials ( basic rate ) . ( m1045 ) 841 supplying all materials, labours and equipments for constructing p.c.c. ( 1:2:4 ) drain as per unicef design etc. all complete including carriage of materials ( basic rate ) . ( m1046 ) 842 supplying extra deep well hand pump complete sets with cylinder assembly & connecting rod ( 12 pcs ) as per is : 15500 part 2 / 2004 ( basic rate ) . ( m1047 ) 843 supply of 200mm dia x 3.00m long upvc casing pipe conferming to is : 12818: 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . ( m1048 ) 844 supply of 200mm dia ribbed screen pipe conferming tois : 12818: 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . ( m1049 ) 845 supply of 125mm dia ribbed screen pipe conferming tois : 12818: 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . ( m1050 ) 846 supplying all tools, equipments and labour and lowering 32 mm dia medium quality g.i. pipe in drilled tube well in 3 mtrs. length all complete as per dirction e / i including carriage of materials ( basic rate ) . ( m1051 ) 847 supplying all tools, labour for fitting and fixing deep well cylinder with necessary connecting rod complete job as per specification & direction of e / i including carriage of materials ( basic rate ) . ( m1052 ) 848 supplying all materials, labours and fixing india mark ii hand pump with all accessories all complete job as per direction of e / i including carriage of materials ( basic rate ) . ( m1053 ) 849 design, supply, installation testing & commissioning of packaged water treatment plants ( unconventional type ) of different capacity with ( 20 hours operation ) comprising of lamella clarifier, static mixture flocculation tank ( smet ) , multi grade filter ( mgf ) with best quality filter media, lime / coagulant / polymer dosing system hypo chloride dosing system, raw water feed pump / clear water transfer pump ( either or ) , sludge transfer cum recirculation pump, filter feed pump & back wash pump including all fitting like valve and other special fittings and electrical power supply to the different supplied units with mcb panel internal electrification with lighting arrangement with treatment plant site with provision of chemical storage and water testing boratoryfacility should be from a reputed manufacturer / authorized distribution / authorized dealer conforming to relevant is codes and certified by iso 9001 2008 & 14001, it also include cost of civil foundation, including clarified water tank internal connecting pipe line from raw water inlet to cwr and applying internal epoxy paint on the supply equipment all the prices are exclusive of gst, allied structure / items which are site specific such as external electrification, approach road, foot bridge, cofferdam, compound wall, scada and automation, cwr pumps etc are to be considered extra. ( m1054 ) 850 packaged lamella clarified type wtp with mgf capacity in mld. 851 0.2 852 0.3 853 0.4 854 0.5 855 0.6 856 pumps ( m1055 ) 857 supplying100 mm dia submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene / noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single / double run shall be provided with each pump. 858 submersible pump set 100 mm dia ( with polypropylene / noryl impeller ) up to 20 stages 859 1 h.p. 860 1.5hp 861 2 hp 862 2.5 hp 863 3.0 hp 864 4.0 hp 865 5.0 hp 866 supply rate should be increased by rs 200 / per stage for pump with more than 20 stages 867 submersible pump 150 mm dia ( with bronze impeller ) up to 8 stages 868 1.5 hp 869 2.0 hp 870 3.0 hp 871 4.0 hp 872 5.0 hp 873 6.0 hp 874 7.5 hp 875 supply rate should be increased by rs 600 / per stage for pump with more than 8 stages 876 submersible pump 150 mm dia ( with bronze impeller ) up to 12 stages 877 8.0 hp 878 9.0 hp 879 10.0 hp 880 11.0 hp 881 12.5 hp 882 15.0 hp 883 supply rate should be increased by rs 600 / per stage for pump with more than 12 stages 884 submersible pump 150 mm dia ( with bronze impeller ) up to 20 stages 885 17.5 hp 886 20.0 hp 887 25 hp 888 1 ) supply rate should be increased by rs 600 / per stage for pump with more than 20 stages for bore well only. 889 for other use 200 mm dia pump shall be preferred over 150 mm dia with more than 20 stage pump. 890 2 ) for 150 mm dia energy efficient pumps add as below 891 a. up to 8 stages : 3% on supply rate 892 b. up to 12 stages : 4% on supply rate 893 c. up to 15 stages : 5% on supply rate 894 pressure gauge ( m1056 ) 895 providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint 896 pressure gauge ( 100 mm dia ) 897 pressure gauge ( 150 mm dia ) 898 vacuum / combination gauge 899 supplyingvacuum gauge / combination gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia g.i. pipe. 900 vacuum / combination gauge – 100 mm dia 901 vacuum / combination gauge – 150 mm dia 902 lifting equipment ( m1057 ) 903 chain pulley block 904 supplyingtriple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark. 905 1 tonne capacity 906 2 tonne capacity 907 3 tonne capacity 908 hand operated circular or rectangular travelling crane ( single girder ) 909 supplyingsingle girder hand operated circular / rectangular travelling crane with 6 m lift complete with chain pulley block isi marked and travelling trolley both tested for 50% overload including arrangement for longitudinal travel / circular travel and cross travel with wheel, hand chain, etc complete. 910 3 tonne capacity 911 up to 5 m span 912 above 5 m up to 6 m span 913 above 6 m up to 8 m span 914 5 tonne capacity 915 up to 5 m span 916 above 5 m up to 6 m span 917 above 6 m up to 8 m span 918 above 8 m up to 10 m span 919 electric operated circular or rectangular travelling crane ( single girder ) 920 supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block. 921 5 tonne capacity 922 above 6 m up to 8 m span 923 above 8 m up to 10 m span 924 7.5 tonne capacity 925 above 6 m upto 8 m span 926 above 8 m up to 10 m span 927 10 tonne capacity 928 above 6 m up to 8 m span 929 above 8 m up to 10 m span 930 square bar / rail 931 providing, erecting and fixing square bar of en 8 as rail for over head crane on provided track, girder / continuous corbel beam, including supporting plate and “j” bolts. 932 50 x 50 mm ( en 8 ) 933 40 x 40 mm ( en 8 ) 934 lightening arrester, ab switch, insulators ( m1058 ) 935 lightening arrestor 936 supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line. 937 suitable for 11 kv supply, distribution class 938 suitable for 22 kv supply, distribution class 939 suitable for 33 kv supply, station class 940 disc insulator 941 supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm 942 suitable for 11kv line 943 suitable for 33kv line 944 pin insulator 945 supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm 946 suitable for 11kv line 947 suitable for 33kv line 948 air break switch without earth switch 949 supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps 950 suitable for 11kv line 951 rocking / tilting type 952 rotating type 953 suitable for 33kv line 954 rocking / tilting type 955 rotating type 956 air break switch with earth switch 957 supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps 958 suitable for 11kv line 959 rotating type 960 suitable for 33kv line 961 rotating type 962 drop out fuse ( channel mounted ) 963 supplying, erecting approved make out door type drop out fuse channel type with insulator complete with fuse holders fuse barrel with metal fittings, fuse element, with working currentup to 50 amp, capacity completeerected on provided cross arm, each set comprising 3 units 964 suitable for 11 kv line 965 suitable for 33 kv line 966 horn gap fuse ( channel mounted ) 967 supplying, erecting approved make out door type horn gap type fuse with insulator, fuse element, with working current up to 50 amp, capacity complete erected on provided cross arm, each set comprising 3 units 968 suitable for 11 kv line 969 suitable for 33 kv line 970 transformer ( m1059 ) 971 power transformer ( with off load tap changer ) any isi mark 972 supplyingoutdoor type copper wound transformer continuously rated for 3ph, 50 hz, at full load and temp. rise not exceeding 450 c by thermometer in oil and 500 c by theresistance in winding after continuous run at full load rating, thetransformer should have oil immersed winding having vector group dy11, ht side connected in delta and lt side connected in star with neutral brought out connected to provideseparateearthing. the transformer shall have power terminal arrangement, bushing / cable end box on ht side and cable end box on lt side. 2 nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. the transformer should have following standard fittings. transformer shall be latest manufacturing standards as per amended is specifications and the load & no load losses shall be limited to the values given below or as per is or norms issued by seb which ever are lower 973 1. oil conservator with filling hole with cap and plain oil level gauge. 974 2. silica gel dehydrating breather charged with silica gel. 975 3. oil drain valve 976 4. oil filter valve 977 5. lifting eyes / hooks 978 6. two earthing terminals 979 7. diagram and rating plate 980 8. air vent 981 9. explosion vent 982 10. 100mm dia thermo meter with thermometer pocket 983 11. four bi directional plain roller. 984 power transformer 11000 / 433 volts with off load tap changer – 12.5% to +2.5% in steps of 2.5% as per bis level 2. 985 63 kva ( no load loss 180w and load loss 1235w ) 986 100 kva ( no load loss 260w and load loss 1760w ) 987 160kva ( no load loss 260w and load loss 1760w ) 988 200kva ( no load loss 500w and load loss3000w ) 989 250kvaa ( no load loss 550w and load loss3600w ) 990 315kva ( no load loss 580w and load loss 4200w ) 991 400 kva ( no load loss 715w and load loss 5000w ) 992 500 kva ( no load loss 850w and load loss 5800w ) 993 630 kva ( no load loss 1000w and load loss 7000w ) 994 750 kva ( no load loss 1500w and load loss 8000w ) 995 power transformer ( with on load tap changer ) 996 supplyingoutdoor type copper wound transformer continuously rated for 3ph, 50 hz, at full load and temp. rise not exceeding 450 c by thermometer in oil and 500 c by theresistance in winding after continuous run at full load rating, thetransformer should have oil immersed winding having vector group dy11, ht side connected in delta and lt side connected in star with neutral brought out connected to provideseparateearthing. the transformer shall have power terminal arrangement, bushing / cable end box on ht side and cable end box on lt side. 2nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. the transformer should have following standard fittings. the oltc should be suitable for minimum 50 operations per day. transformer shall be latest manufacturing standards as per amended is specifications and the load & no load losses shall be limited to the values given below or as per is or norms issued by seb which ever are lower 997 1. oil conservator with filling hole with cap and plain oil level gauge. 998 2. silica gel dehydrating breather charged with silica gel. 999 3. oil drain valve 1000 4. oil filter valve 1001 5. lifting eyes / hooks 1002 6. two earthing terminals 1003 7. diagram and rating plate 1004 8. air vent 1005 9. explosion vent 1006 10. 100mm dia thermo meter with thermometer pocket 1007 11. four bi directional plain roller. 1008 12. buchholz relay 1009 13. resistance temp. detector 1010 14. marshalling box 1011 15. automatic voltage regulator ( avr ) 1012 16. remote tap changing controller ( rtcc ) 1013 transformer 11000 / 433 volts withon load tap changer – 15% to +5% in steps of 1.25% with rtcc, avr and marshalling box and other specification as per bis level 2. 1014 750 kva 1015 1000 kva 1016 1250 kva 1017 1600 kva 1018 2000 kva 1019 motors ( m1060 ) 1020 foot mounted motors tefc 1500 rpm 1021 supplyingfoot mounted tefc 1500 rpm, squirrel cage induction motor, conforming to is 325 having continuous rating suitable for operation at 415 volts + / 10%, 3 phase, 50 hz + / 3% with “f” class insulation temperature rise limited to class “b” insulation. motors conform to is 12615 with efficiency level ie3 and provided with enclosure protection class ip 55. 1022 15 kw ( 20 hp ) 1023 18.5 kw ( 25 hp ) 1024 22 kw ( 30 hp ) 1025 30 kw ( 40 hp ) 1026 37 kw ( 50 hp ) 1027 45 kw ( 60 hp ) 1028 55 kw ( 75 hp ) 1029 75 kw ( 100 hp ) 1030 90 kw ( 120 hp ) 1031 110 kw ( 150 hp ) 1032 132kw ( 180hp ) 1033 160kw ( 215 hp ) 1034 250kw ( 335 hp ) 1035 foot mounted motor tefc 1500 rpm 1036 0.75 kw ( 1hp ) 1037 1.1 kw ( 1.5 hp ) 1038 1.5 kw ( 2 hp ) 1039 2.2 kw ( 3 hp ) 1040 3.7 kw ( 5 hp ) 1041 5.5 kw ( 7.5 hp ) 1042 7.5 kw ( 10 hp ) 1043 9.3 kw ( 12.5 hp ) 1044 11 kw ( 15 hp ) 1045 aluminium cable ( m1061 ) 1046 cable 1047 aluminium conductor three core, xlpe / pvc insulated & armoured cable . 1048 supplyingxlpe / pvc insulated, armoured cable 1100 v grade with isi mark three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1049 3 core 2.5 sq mm 1050 3 core 4 sq mm 1051 3 core 6 sq mm 1052 3 core 10 sq mm 1053 3 core 16 sq mm 1054 3 core 25 sq mm 1055 3 core 35 sq mm 1056 3 core 50 sq mm 1057 3 core 70 sq mm 1058 3 core 95 sq mm 1059 3 core 120 sq mm 1060 3 core 150 sq mm 1061 3 core 185 sq mm 1062 3 core 240 sq mm 1063 3 core 300 sq mm 1064 3 core 400 sq mm 1065 aluminium conductor 3.5 core, xlpe / pvc insulated & unarmoured cable 1066 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three and half core, stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, completein an approved manner. 1067 3.5 core 25 sq mm 1068 3.5 core 35 sq mm 1069 3.5 core 50 sq mm 1070 3.5 core 70 sq mm 1071 3.5 core 95 sq mm 1072 3.5 core 120 sq mm 1073 3.5 core 150 sq mm 1074 3.5 core 185 sq mm 1075 3.5 core 240 sq mm 1076 3.5 core 300 sq mm 1077 3.5 core 400 sq mm 1078 ht aluminium three core 3.3 kve cable xlpe insulated 1079 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1080 3 core 35 sq mm 1081 3 core 50 sq mm 1082 3 core 70 sq mm 1083 3 core 95 sq mm 1084 3 core 120 sq mm 1085 3 core150sq mm 1086 3 core 185 sq mm 1087 3 core 240sq mm 1088 3 core 300 sq mm 1089 3 core 400 sq mm 1090 ht aluminium three core 6.6 kv ( ue ) / 11kv ecable xlpe insulated 1091 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1092 3 core 35 sq mm 1093 3 core 50 sq mm 1094 3 core 70 sq mm 1095 3 core 95 sq mm 1096 3 core 120 sq mm 1097 3 core150sq mm 1098 3 core 185 sq mm 1099 3 core 240sq mm 1100 3 core 300 sq mm 1101 3 core 400 sq mm 1102 ht aluminium three core 11kv ( ue ) cable xlpe insulated 1103 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1104 3 core 35 sq mm 1105 3 core 50 sq mm 1106 3 core 70 sq mm 1107 3 core 95 sq mm 1108 3 core 120 sq mm 1109 3 core150sq mm 1110 3 core 185 sq mm 1111 3 core 240sq mm 1112 3 core 300 sq mm 1113 3 core 400 sq mm 1114 aluminium conductor three core, xlpe / pvc insulated & unarmoured cable . 1115 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1116 3 core 4 sq mm 1117 3 core 6 sq mm 1118 3 core 10 sq mm 1119 3 core 16 sq mm 1120 3 core 25 sq mm 1121 3 core 35 sq mm 1122 3 core 50 sq mm 1123 3 core 70 sq mm 1124 3 core 95 sq mm 1125 3 core 120 sq mm 1126 3 core 150 sq mm 1127 3 core 185 sq mm 1128 3 core 240 sq mm 1129 3 core 300 sq mm 1130 3 core 400 sq mm 1131 copper cable ( m1062 ) 1132 cable 1133 3 core pvc insulated, pvc sheathed copper conductor flat submersible cable . 1134 supplying , flat flexible submersible cable with, copper conductor, pvc insulated, and pvc sheathed . 1135 3 core 1.5 sq mm 1136 3 core 2.5 sq mm 1137 3 core 4 sq mm 1138 3 core 6 sq mm 1139 3 core 10 sq mm 1140 3 core 16 sq mm 1141 3 core 25 sq mm 1142 3 core 35 sq mm 1143 copper conductor three core, xlpe / pvc insulated & unarmoured cable . 1144 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1145 3 core 1.5 sq mm 1146 3 core 2.5 sq mm 1147 3 core 4 sq mm 1148 3 core 6 sq mm 1149 3 core 10 sq mm 1150 3 core 16 sq mm 1151 3 core 25 sq mm 1152 3 core 35 sq mm 1153 3 core 50 sq mm 1154 3 core 70 sq mm 1155 3 core 95 sq mm 1156 copper conductor 3.5 core, xlpe / pvc insulated & armoured cable . 1157 supplyingxlpe / pvc insulated, armoured cable 1100 v grade with isi mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, completein an approved manner. 1158 3.5 core 1.5 sq mm 1159 3.5 core 2.5 sq mm 1160 3.5 core 4 sq mm 1161 3.5 core 6 sq mm 1162 3.5 core 10 sq mm 1163 3.5 core 16 sq mm 1164 3.5 core 25 sq mm 1165 3.5 core 35 sq mm 1166 3.5 core 50 sq mm 1167 3 .5 core 70 sq mm 1168 3.5 core 95 sq mm 1169 3.5 core 120 sq mm 1170 3 .5 core150sq mm 1171 3.5 core 185 sq mm 1172 3.5 core 240sq mm 1173 3.5 core 300 sq mm 1174 3.5 core 400 sq mm 1175 copper conductor 3.5 core xlpe / pvcunarmoured 1176 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1177 3.5core 25 sq mm 1178 3.5core 35 sq mm 1179 3.5 core 50 sq mm 1180 3.5 core 70 sq mm 1181 3.5 core 95 sq mm 1182 3.5 core 120 sq mm 1183 3.5 core150sq mm 1184 3.5 core 185 sq mm 1185 3.5 core 240sq mm 1186 3.5 core 300 sq mm 1187 3.5 core 400 sq mm 1188 copper conductor three core, xlpe / pvc insulated & armoured cable . 1189 supplyingxlpe / pvc insulated, armoured cable 1100 v grade with isi mark three core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1190 3 core 1.5 sq mm 1191 3 core 2.5 sq mm 1192 3 core 4 sq mm 1193 3 core 6 sq mm 1194 3 core 10 sq mm 1195 3 core 16 sq mm 1196 3 core 25 sq mm 1197 3 core 35 sq mm 1198 3 core 50 sq mm 1199 3 core 70 sq mm 1200 3 core 95 sq mm 1201 3 core 120 sq mm 1202 3 core 150sq mm 1203 3core 185 sq mm 1204 3 core 240 sq mm 1205 3 core 300 sq mm 1206 3 core 400 sq mm 1207 foot valve ( m1063 ) 1208 foot valve 1209 supplying c.i. foot valve having single leather flap and gunmetal seating. valve shall be fixed on suction side of pump as per requirement including jointing material and hardware. 1210 flanged type 1211 50 mm 1212 65 mm 1213 80 mm 1214 100 mm 1215 125 mm 1216 150 mm 1217 aircircuit breaker ( m1064 ) 1218 acbbreaking capacity 50ka thermal magnetic manual draw out type 3 pole 1219 630a 1220 800a 1221 1000a 1222 1250a 1223 1600a 1224 2000a 1225 starter ( m1065 ) 1226 d.o.l. starter with ss enclosure with 380 / 415 volt coil 1227 7.5 h.p. 1228 10 h.p. 1229 supplyingfully automatic star delta starter to operate induction motor working on415v, 3phase, 50 hz with no volt coil, over load element, on off push buttons, with necessary materials and connected to supply, etc complete starter with original sheet steel encloser 1230 f.a.s.d starter 1231 10.0 h.p. 1232 15 h.p. 1233 20 h.p. 1234 25 h.p. 1235 35 h.p. 1236 40 hp 1237 50 hp 1238 75 h.p. 1239 100 h.p. 1240 125 h.p. 1241 150 h.p. 1242 250 h.p. 1243 servo controlled automatic voltage stabilizer ( m1066 ) 1244 providing, erecting servo controlled automatic voltage stabiliser suitable for out put voltage of 415 volt + / 1%, 3 ph, 50 hz, with copper wound transformer ( air / oil cooled ) as mentioned below. the stabilizer shall function satisfactorily even if incoming supply is unbalanced between phases within range of 10%. the stabilizer should be constructed in cubical box, with bidirectional wheels for easy handling, necessary monitors and users controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and out put voltage, auto / manual selector switch, raise / low push buttons etc. suitable capacity termination strips and bus bars for incoming and out going cable should be provided. all three phases shall be independently monitored and corrected. following protections and indications shall be incorporated 􀂌 over voltage / under voltage 􀂌 single phasing 􀂌 cut off contactor with electronic output sensing unit 1245 servo controlled automatic voltage stabiliser ( out put 415 + / 1% ) input 150 to 450 volt 1246 20 kva air cooled 1247 25 kva air cooled 1248 30 kva air cooled 1249 40 kva air cooled 1250 50 kva oil cooled 1251 60 kva oil cooled 1252 75 kva oil cooled 1253 100 kva oil cooled 1254 125 kva oil cooled 1255 servo controlled automatic voltage stabiliser ( out put 415 + / 1% ) input 280 to 460 volt 1256 15 kva air cooled 1257 20 kva air cooled 1258 25 kva air cooled 1259 30 kva air cooled 1260 40 kva air cooled 1261 50kva air cooled 1262 60 kva oil cooled 1263 75kva oil cooled 1264 100 kva oil cooled 1265 125 kva oil cooled 1266 150 kva oil cooled 1267 200kva oil cooled 1268 250kva oil cooled 1269 300 kva oil cooled 1270 400 kva oil cooled 1271 termination kit ( m1067 ) 1272 providing and errecting in door type termination kit, for 3.3kv / 6.6 kv / 11kv / 22kv / 33kv xlpe screened 3 core cable 1273 in door termination kit for 3.3kv ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1274 25 50 mm2 1275 70 120 mm2 1276 150 185 mm2 1277 240 400 mm2 1278 out door termination kit for 3.3 ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1279 25 50 mm2 1280 70 120 mm2 1281 150 185 mm2 1282 240 400 mm2 1283 straight through joint for 3.3kv ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1284 25 50 mm2 1285 70 120 mm2 1286 150 185 mm2 1287 240 300 mm2 1288 in door termination kit for 11kv ( e ) xlpe screened 3 core cable 1289 25 50 mm2 1290 70 120 mm2 1291 150 185 mm2 1292 240 400 mm2 1293 out door termination kit for 11kv ( e ) xlpe screened 3 core cable 1294 25 50 mm2 1295 70 120 mm2 1296 150 185 mm2 1297 240 400 mm2 1298 straight through joint for 11 kv ( e ) xlpe screened 3 core cable 1299 25 50 mm2 1300 70 120 mm2 1301 150 185 mm2 1302 240 300 mm2 1303 in door termination kit for 22kv ( e ) xlpe screened 3 core cable 1304 25 50 mm2 1305 70 120 mm2 1306 150 185 mm2 1307 240 400 mm2 1308 out door termination kit for 22kv ( e ) xlpe screened 3 core cable 1309 25 50 mm2 1310 70 120 mm2 1311 150 185 mm2 1312 240 400 mm2 1313 straight through joint for 22 kv ( e ) xlpe screened 3 core cable 1314 25 50 mm2 1315 70 95 mm2 1316 120 150 mm2 1317 185 240 mm2 1318 300 400 mm2 1319 in door termination kit for 33kv ( e ) xlpe screened 3 core cable 1320 25 50 mm2 1321 70 95 mm2 1322 120 185 mm2 1323 240 400 mm2 1324 out door termination kit for 33 kv ( e ) xlpe screened 3 core cable 1325 25 50 mm2 1326 70 95 mm2 1327 120 185 mm2 1328 240 400 mm2 1329 straight through joint for 33 kv ( e ) xlpe screened 3 core cable 1330 35 70 mm2 1331 95 150 mm2 1332 185 300 mm2 1333 400 mm2...

Bharat Coking Coal Limited - Jharkhand

32522375 supply of 1 chain pulley block 3 ton capacity with alloy steel chain 3 mtr. isi mark 2 . chain pulley block 5 ton capacity with alloy steel chain 3 mtr. isi mark 3 barrel pump hand operated rotary type suitable for 210 ltr. drums. 4 c.i. gate valve 2 inch 5 g.m. wheel valve size 1 inch...

Department Of Atomic Energy - Jharkhand

32342877 bids are invited for annual civil maintenance work of turamdih township title1 earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil all kinds of soil. title2 return earth filling by available excavated earth excluding rock in trenches plinth sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming allow for breading up lumes shrinkage etc watering lead upto 50 metre and lift up to 1.5m complete as directed by the eic title3 providing and laying damp proof course 40mm thick with cement concrete one cement isto two coarse sand zone three isto four graded stone aggregate twelve point five mm nominal size title4 providing and laying plain cement concrete one cement isto three coarse sand isto six graded stone aggregate 20mm nominal size title5 providing and laying reinforced cement concrete work in walls any thickness including attachedpilasters buttresses plinth and string courses fillets columns piers aboutments posts and struts etc up to floor five level excluding cost of centering shuttring finishing and reinforcement.one cement isto one point five coarse sand isto 3graded stone aggregate 20mm nominal size title6 centering shuttering including removal of form work for all types of work for providing and fixing straight shuttering foundation footings bases of columns etc. title7 suspended floors roofs landings balconies shelves etc. title8 providing hoisting and fixing up to floor five level precast reinforced cement concrete one cement isto 1.5 coarse sand isto 3 graded stone aggregate 20mm nominal size ) title9 reinforcement for rcc work including straighteningm cutting bending placing in position and binding all complete.hot rolled deformed base title10 brick work with fps brick of class designation 75 in foundation and plinth in cement mortar one cement isto 6 coarse sand. title11 brick work with fps brick of class designation 75 in superstructur and plinth in cement mortar one1 cement isto 6 coarse sand. extra for brick work in superstructure above floor v level for each four floors or part thereof by mechanical means by lifting material using mobile crane. title12 brick work 7 cm thick with common burnt clay fps non modular brick of class designation 7.5 in cement mortar one cement isto 3 coarse sand in superstructure above plinth level and upto floor five level title13 random nubble masonry with hard stone in foundation and plinth including levelling up with cement concrete one cement isto 6 coarse sand isto 12 graded stone aggregate 20 mm nominal size at plinth level with cement mortar one cement isto six coarse sand title14 providing and fixing isi marked flush door shutters conforming to is isto 2202 part i decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including isi marked stainless steel butt hinges with necessary screw title15 do but 25 mm thick for cupboard including isi marked hinges is isto 3818 title16 providing and fixing wire gauge shutters using galvanized ms wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors windows and clerestory windows with hinges and necessary screws title17 providing and fixing panelled or panelled and glazed shutters for doors windows and clerestory windows including isi marked ms pressed butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately all complete as per direction of eic. 30 mm thick shutters title18 providing and fixing magnetic catcher of approved quality in cupboard or ward robe shutters including fixing with necessary screws etc complete double strip horizontal type title19 providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc wherever necessary complete 20 mm diameter title20 providing and fixing isi marked m.s pressed butt hinges bright finished with necessary screws etc . complete. 125 into 65 into 2.12 mm title21 providing and fixing isi marked oxidised ms sliding door bolts with nuts and screws etc complete. 300 into 16 mm . title22 providing and fixing isi marked oxidised ms tower bolt black finish barrel type with necessary screws etc complete. size 250 into10 mm title23 providing and fixing isi marked oxidised ms handles conforming to is isto 4992 with necessary screws etc completed . 125 mm. title24 providing and fixing oxidised ms casement window fastener with necessary screws etc. complete. title25 providing and fixing oxidised ms bright casement stays straight peg type with nacessary screws etc.completed 300 mm weighing not less than 330 gms. title26 providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws title27 providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion necessary brass screws etc to suit shutter thickness complete title28 hydraulic door closer bottle type ms body with necessary accessories and screws complete title29 providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete title30 30 mm thick factory made polyvinyl chloride pvc door shutter made of styles and rails of a upvc hollow section of size 60 into 30 mm and wall thickness 2 mm plus 0.2 mm with inbuilt decorative moulding edging on one side.the styles and rails mitred and joint at the corners by means of m.s. galvanised or plastic brackets of size 75 into 220 mm having wall thickness 1.0 mm and stainless steel screws. the styles of the shutter reinforced by inserting galvanised ms tube of size 25 into 20 mm and 1 mm 0.1 mm wall thickness. the lock rail made up of h section a upvc hollow section of size 100 into 30 mm and 2 mm 0.2 mm wall thickness fixed to the shutter styles by means of plastic or galvanised ms u cleats. the shutter frame filled with a upvc multi chambered single panel of size not less than 620 mm having over all thickness of 20 mm and 1 mm 0.1 mm wall thickness. the panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised ms rod and fastened with nuts and washers complete as per manufacturers specification and direction of eic title31 structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete title32 ms door frame title33 providing and fixing 1mm thick m.s. sheet door with frame of 40 into 40 into 6 mm angle iron and 3 mm m.s. gusset plates at the junctions all necessary fittings complete including applying a priming coat of approved steel primer.using m.s. angles 40 into 40 into 6 mm for diagonal braces title34 providing and fixing factory made isi marked steel glazed windows and ventilators side or top or centre hung with beading and all members such as f7d f4b k11 b and k12 b etc. complete of standard rolled steel sections joints mitred and flash butt welded and sash bars tenoned and riveted including providing and fixing of hinges pivots including priming coat of approved steel primer but excluding the cost of other fittings complete all as per approved design sectional weight of only steel members shall be measured for payment. fixing with 15 into 3 mm lugs 10 cm long embedded in cement concrete block 15 into10 into10 cm of cc one cement isto 3 coarse sand isto 6 graded stone aggregate 20 mm nominal size title35 providing and fixing 1st quality ceramic glazed wall tiles conforming to thickness to be specified by the manufacture of approved make in all colour shades except burgundy bottle green black of any size as approved by eic in skirting risers of steps and dados over 12mm thick bed of cement mortar 1 isto 3. 3.3kg per sqm including pointing in white white cement mixed with pigment of matchine shade complete. title36 providing and laying vetrified glazed ceramic floor tiles 600 x 600 mm or more thickness to be specified by the manufacturer of 1st quality conforming to is 15622 of approved make in colours white ivory grey fume red brown laid on 20mm thick cement mortar one cement isto four coarse sand including grouting the joints with white cement and matching pigement etc complete. title37 cement plaster skirting up to 30 cm height with cement mortar one cement isto 3 coarse sand finished with a floating coat of neat cement 18mm thick. title38 cement concrete flooring 1 cement isto 2 coarse sand isto 4 graded stone aggregate finished with a floating coat of next cement including cement slurry but excluding the cost of nosing of steps etc.complete 40mm thick with 2mm nominal size stone aggreate. title39 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type a including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion single socketed pipes 110 mm dia. title40 providing and fixing ms holder bat clamp of approved design to sand cast iron or cast iron spun pipes comprising of ms flat brackets made of 50 into 5 mm flat of specified shape projecting 75 mm outside the wall surface and fixed on wall with 4nos 6mm dia expansion hold fasteners including drilling necessary holes in brick wall or cc or rcc surface and the cost of bolts etc. the pipes shall be fixed to the already fixed brackets with the help of 30 mm into 1.6 mm galvanised ms flats of specified shape and of total length 420 mm and shall be fixed with ms nuts bolts and washers of size 25 into 6 mm one bolts on each side of the pipe.total bracket length 580 mm of approved shape and design for single 100 mm dia pipe. title41 making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls flooring and jambs complete to match existing surface i or c disposal of mulba or rubbish to the nearest municipal dumping ground all complete as per directions of eic. for door or window or clerestory window for window ac or door or window or clerestory window title42 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground all complete as per directions of eic with cement mortar one cement isto four coarse sand title43 6 mm cement plaster of mix 1 isto 3 one cement isto three fine sand for ceilling title44 neat cement punning title45 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete title46 supplying and applying two coats of white wash over old work at various elevations including preparation of surfaces cleaning etc. complete with all materials labour tools and tackle etc scaffolding work as per specifications and directions of eic. composition water at the rate 5 litres per kg of lime for making cream.fevicol ddl at the rate 4 gm per litre of lime cream.robin blue at the rate 2gm per kg lime. title47 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade old work one or more coats applied at the rate 0.83 ltr or10 sqm. title48 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work title49 wall painting with acrylic emulsion plastic paint having voc volatile organic compound content less than 50grams or litre of approved brand and manufuacture including applying additional coats wherever required to achieve even shade and colour two coat . title50 applying one coat of cement primer of approved brand and manufacture on wall surface as per the direction of eic. title51 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work two or more coats over and including water thinnable priming coatwith cement primer title52 applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface water thinnable cement primer title53 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete title54 cleaning of terrace or loft water storage tank inside surface area upto 2000 litre capacity at all heights with coconut brushes duster etc removal of silt rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder at rate 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of eic. any gi fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account title55 disconnecting damaged overhead / terrace pvc water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of eic title56 dismantling wc pan of all sizes including disposal of dismantled materials ic malba all complete as per directions of eic title57 demolishing cement concrete manually or by mechanical means including disposal of material within 50 metres lead as per direction of eic.nominal concrete 1 isto 3 isto 6 or richer mix ic equivalent design mix title58 demolishing rcc work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of eic. title59 taking out existing wooden door shutter repair by cutting painting etc and refixing of repaired door shutters to existing door frames including replacement of hinges with screws etc as required all complete as per the direction of the eic title60 making plinth protection 50mm thick of cement concrete 1isto 3 isto 6 one cement isto three coarse sand isto six graded stone aggregate 20 mm nominal size over 75mm thick bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling and dressing and finishing the top smooth title61 dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete with common burnt clay fps non modular bricks of class designation 7.5 title62 providing and fixing white vitreous china water closet squatting pan indian type along with s or p trap including dismantling of old wc seat and s or p trap at site complete with all operations including all necessary materials labour and disposal of dismantled material ic malba all complete as per the direction of engineer in charge. orissa pattern wc pan of size 580 multiply 440 mm title63 providing and fixing white vitreous china pedestal type european type or wash down type water closet pan title64 providing and fixing half stall urinal providing and fixing stainless steel a isi 304 18 or 8 kitchen sink as per is13983 with ci brackets and stainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required with pvc automatic cistern 05 l capacity. title65 providing and fixing stainless steel a isi 304 18or8 kitchen sink as per is 13983 with ci brackets and stainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required kitchen sink without drain board 610 multiply 510 mm bowl depth 200 mm title66 providing and fixing draining board with ci brackets including painting of brackets cutting and making good the walls wherever required white glazed fire clay draining board of size 600 multiply 450 multiply 25 mm title67 providing and fixing kitchen sink with ci brackets cp brass chain with rubber plug 40 mm cp brass waste complete including painting the fittings and brackets cutting and making good the walls wherever required white glazed fire clay kitchen sink of size 600 into 450 into 250 mm title68 providing and filling the joints with mseal joint or spun yarn cement slurry and cement mortar 1isto2 one cement isto two fine sand in sci. or ci pipes 100 mm dia pipe title69 providing and fixing pvc waste pipe for sink or wash basin including pvc waste fittings complete flexible pipe 32 mm dia title70 do flexible pipe 40 mm dia title71 providing and fixing 600 into 450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with cp brass screws and washers complete title72 providing and fixing 600 into120 into 5 mm glass shelf with edges round off supported on anodised aluminium angle frame with cp brass brackets and guard rail complete fixed with 40 mm long screws rawl plugs etc complete title73 providing and fixing bend of required degree with access door insertion rubber washer 3 mm thick bolts and nuts complete 100 mm dia sand cast iron sand as per is 1729. title74 providing and fixing solid plastic seat with lid for pedestal type e wc pan complete black solid plastic seat with lid title75 providing and fixing ms holderbat clamps of approved design to sand cast iron or cast iron spun pipe embedded in and including cement concrete blocks 10 into10 into10 cm of 1 isto 2 isto 4 mix one cement isto two coarse sand isto four graded stone aggregate 20 mm nominal size including cost of cutting holes and making good the walls etc. for 100 mm dia pipe title76 providing and fixing ptmt waste coupling for wash basin and sink of approved quality and colour waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms title77 waste coupling 38 mm dia of 83 mm length and 77mm breadth weighing not less than 60 gms title78 providing and fixing pvc low level flushing cistern with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete 10 litre capacity white title79 providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings flat back wash basin of size 630 into 450 mm title80 providing and fixing 100 mm sand cast iron grating for gully trap title81 providing and fixing soil, waste and vent pipes 100mm dia sand cast iron sands pipe as per is 1729 title82 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm 78 mm wide and effective height of 88 mm weighing not less than 170 gms title83 providing and fixing brass bib cock of approved quality 15 mm nominal bore title84 providing and fixing g.i. pipes complete with gi fittings including trenching and refilling etc internal work 15mm dia. nominal bore title85 do gi pipe 20m dia title86 do gi pipe 25m dia title87 do gi pipe 40m dia . title88 providing and fixing upvc pipes complete with push on fittings including trenching and refilling etc. internal work 15mm dia. nominal bore title89 do upvc pipe 20m dia . title90 do upvcpipe 25m dia . title91 providing and fixing of super zinc or color coated steel crafazoial profile or profile tiles color coated steel sheet. corrugated sheet up to 60 pitch title92 providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm plus 0.05 percent total coated thickness zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 to7 microns epoxy primer on both side of the sheet and polyester top coat 15 to18 microns using self drilling or self tapping screws complete ridges plain 500 to 600mm title93 providing and fixing cp brass bib cock of approved quality conforming to is 8931. 15 mm nominal bore title94 providing and fixing cp brass angle valve for basin mixer and geyser points of approved quality conforming to is8931. 15mm nominal bore title95 providing and fixing gun metal gate valve with ci wheel of approved quality screwed end 25 mm nominal bore title96 providing and fixing gun metal gate valve with ci wheel of approved quality screwed end 50 mm nominal bore title97 providing and fixing brass stop cock of approved quality 20 mm nominal bore title98 providing and fixing unplasticised p.v.c. connection pipe with ptmt nuts collar and bush of approved quality and colour.hot or cold 15 mm nominal bore with 45cm length title99 providing fixing 150mm diaglazed stone wire pipes or hume pipe . title100 providing and laying cement concrete 1 isto 5 isto 10 one cement isto five coarse sand isto ten graded stone aggregate 40 mm nominal size allround s.w. pipes including bed concrete as per standard design 150 mm diameter s.w. pipe title101 making soak pit 2.5 m diameter 3.0 metre deep with 45 into 45 cm dry brick honey comb shaft with bricks and s.w drain pipe 100 mm diameter 1.8 m long complete as per standard design.with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 title102 renewal of old putty of glass panes length title103 renewing glass panes with putty and nails wherever necessary including racking out the old putty title104 grading roof for water proofing treatment with cement concrete 1isto 2 isto 4 title105 providing and fixing z or t iron frames for doors windows and ventilators of mild steel tee sections joints mitred and welded including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.fixing with 15 into 3 mm lugs 10 cm long embedded in cement concrete block 15 into 10 into10 cm of c.c. 1isto 3 isto 6 one cement isto three coarse sand isto six graded stone aggregate 20 mm nominal size title106 maintenance cp piller or bib cock or angular stop cock by providing spindal. title107 dismantling w.c. pan of all sizes including disposal of dismantled materials all complete as per directions of eic title108 providing and fixing anodised aluminium sheet 2.5mm thick anodiseed according to is 1868 on old door shutter all complete title109 providing and fixing chlorinated polyvinyl chloride cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings this includes jointing of pipes and fittings with one step cpvc solvent cement trenching refilling and testing of joints complete as per direction of engineer in charge. 100 mm nominal inner dia pipes title110 hire and running charges of hydraulic excavator jcb...

Drinking Water And Sanitation Department - Jharkhand

32223632 e quotation for rate of materials for schedule rate jharkhand under d w and s division, medininagar 2022 23. 1 polythene water storage tank of mark ( e.g sintex / sinter / himgiri / gangotietc ) with cover and locking system. ( m079 ) 2 gi pipe 50 mm dia ( tata or equivalent make ) ( m193 ) 3 jute ( m337 ) 4 g.m. ferrules ( m922 ) 5 ( i ) 8 mm dia wt. not less than 400 gms 6 ( ii ) 10 mm dia wt. not less than 400 gms 7 ( iii ) 15 mm dia wt. not less than 400 gms 8 ( iv ) 20 mm dia wt. not less than 600 gms 9 ( v ) 25 mm dia wt. not less than 900 gms 10 stop cocks ( m923 ) 11 ( i ) 15 mm brass stop cock wt. not less than 300 gms 12 ( ii ) 20 mm brass stop cock wt. not less than 400 gms 13 ( iii ) 25 mm brass stop cock wt. not less than 575 gms 14 ( iv ) 32 mm brass stop cock wt. not less than 850 gms 15 ( v ) 40 mm brass stop cock wt. not less than 1.15 kg 16 ( vi ) 50 mm brass stop cock wt. not less than 2.15 kg 17 ( vii ) 15 mm dia c.i. body brass working part stop cock. 18 ( viii ) 20 mm dia c.i. body brass working part stop cock. 19 ( ix ) 25 mm dia c.i. body brass working part stop cock. 20 g.m. full way valve ( m924 ) 21 ( i ) 15 mm dia wt. not less than 300 gms without wheel 22 ( ii ) 20 mm dia wt. not less than 400 gms without wheel 23 ( iii ) 25 mm dia wt. not less than 500 gms without wheel 24 ( iv ) 32 mm dia wt. not less than 700 gms without wheel 25 ( v ) 40 mm dia wt. not less than 1.0 kg without wheel 26 ( vi ) 50 mm dia wt. not less than 1.4 kg without wheel 27 ( vii ) 65 mm dia wt. not less than 1.8 kg without wheel 28 ( viii ) 80 mm dia wt. not less than 2.5 kg without wheel 29 g.m. non return valve verticle ( m925 ) 30 ( i ) 15 mm dia wt. not less than 150 gms 31 ( ii ) 20 mm dia wt. not less than 250 gms 32 ( iii ) 25 mm dia wt. not less than 375 gms 33 ( iv ) 32 mm dia wt. not less than 600 gms 34 ( v ) 40 mm dia wt. not less than 700 gms 35 ( vi ) 50 mm dia wt. not less than 1.0 kg 36 ( vii ) 65 mm dia wt. not less than 1.20 kg 37 ( viii ) 80 mm dia wt. not less than 1.50 kg 38 ( ix ) 100 mm dia wt. not less than 1.80 kg 39 g.m. non return valve horizontal ( m926 ) 40 ( i ) 15 mm dia wt. not less than 150 gms 41 ( ii ) 20 mm dia wt. not less than 250 gms 42 ( iii ) 25 mm dia wt. not less than 375 gms 43 ( iv ) 32 mm dia wt. not less than 600 gms 44 ( v ) 40 mm dia wt. not less than 700 gms 45 ( vi ) 50 mm dia wt. not less than 1.0 kg 46 ( vii ) 65 mm dia wt. not less than 1.20 kg 47 ( viii ) 80 mm dia wt. not less than 1.50 kg 48 ( ix ) 100 mm dia wt. not less than 1.80 kg 49 cocks ( m927 ) 50 ( i ) 15 mm dia g.m. bib cock wt. not less than 300 gms 51 ( ii ) 15 mm dia brass bib cock wt. not less than 400 gms 52 ( iii ) 15 mm dia c.i. bib cock wt. not less than 400 gms 53 ( iv ) 15 mm dia c.i. body brass working part spray painted bib cock wt. not less than 400 gms 54 ( v ) 15 mm dia c.i. brass pillar cock cock wt. not less than 400 gms 55 ( vi ) 15 mm c.i. plug cock ordinary 56 ( vii ) 15 mm c.i. push cock ordinary 57 chromium plated brass fittings ( m928 ) 58 ( i ) c.p. shower rose 100 mm dia 59 ( ii ) c.p. shower rose 125 mm dia 60 ( iii ) p.v.c. shower rose 150 mm dia 61 ( iv ) p.v.c shower rose 125 mm dia 62 connection pipe ( m929 ) 63 ( i ) 15 mm dia x 30 cm. long lead connection pipe with brass fittings. 64 ( ii ) 15 mm dia x 45 cm. long lead connection pipe with brass fittings. 65 ( iii ) 15 mm dia x 30 cm. long pvc connection pipe with brass fittings. 66 ( iv ) 15 mm dia x 45 cm. long pvc connection pipe withbrass fittings. 67 g.i. fittings ( conforming to i.s. 1879 ) isi marked ( m930 ) 68 [ a ] g.i. bend 69 ( i ) 15 mm 70 ( ii ) 20 mm 71 ( iii ) 25 mm 72 ( iv ) 32 mm 73 ( v ) 40 mm 74 ( vi ) 50 mm 75 ( vii ) 65 mm 76 ( viii ) 80 mm 77 ( ix ) 100 mm 78 ( x ) 125 mm 79 ( xi ) 150 mm 80 [ b ] elbow of the following sizes 81 ( i ) 15 mm 82 ( ii ) 20 mm 83 ( iii ) 25 mm 84 ( iv ) 32 mm 85 ( v ) 40 mm 86 ( vi ) 50 mm 87 ( vii ) 65 mm 88 ( viii ) 80 mm 89 ( ix ) 100 mm 90 ( x ) 125 mm 91 ( xi ) 150 mm 92 [ c ] tee plain of the following sizes 93 ( i ) 15 mm 94 ( ii ) 20 mm 95 ( iii ) 25 mm 96 ( iv ) 32 mm 97 ( v ) 40 mm 98 ( vi ) 50 mm 99 ( vii ) 65 mm 100 ( viii ) 80 mm 101 ( ix ) 100 mm 102 ( x ) 125 mm 103 ( xi ) 150 mm 104 [ d ] reducing tee plain of the following sizes ( taking larger dimension ) 105 ( i ) 20 mm 106 ( ii ) 25 mm 107 ( iii ) 32 mm 108 ( iv ) 40 mm 109 ( v ) 50 mm 110 ( vi ) 65 mm 111 ( vii ) 80 mm 112 ( viii ) 100 mm 113 ( ix ) 125 mm 114 ( x ) 150 mm 115 [ e ] socket plain of the following size ( taking larger dimension ) 116 ( i ) 15 mm 117 ( ii ) 20 mm 118 ( iii ) 25 mm 119 ( v ) 40 mm 120 ( vi ) 50 mm 121 ( vii ) 65 mm 122 ( viii ) 80 mm 123 ( ix ) 100 mm 124 ( x ) 125 mm 125 ( xi ) 150 mm 126 [ f ] reducing socket plain of the following sizes ( taking larger dimension ) 127 ( i ) 20 mm 128 ( ii ) 25 mm 129 ( iii ) 32 mm 130 ( iv ) 40 mm 131 ( v ) 50 mm 132 ( vi ) 65 mm 133 ( vii ) 80 mm 134 ( viii ) 100 mm 135 ( ix ) 125 mm 136 ( x ) 150 mm 137 [ g ] union socket of the following sizes 138 ( i ) 15 mm 139 ( ii ) 20 mm 140 ( iii ) 25 mm 141 ( iv ) 32 mm 142 ( v ) 40 mm 143 ( vi ) 50 mm 144 ( vii ) 65 mm 145 ( viii ) 80 mm 146 ( ix ) 100 mm 147 ( x ) 125 mm 148 ( xi ) 150 mm 149 [ h ] plugs of the following sizes 150 ( i ) 15 mm 151 ( ii ) 20 mm 152 ( iii ) 25 mm 153 ( iv ) 32 mm 154 ( v ) 40 mm 155 ( vi ) 50 mm 156 ( vii ) 65 mm 157 ( viii ) 80 mm 158 ( ix ) 100 mm 159 ( x ) 125 mm 160 ( xi ) 150 mm 161 [ i ] jam nuts of the following sizes 162 ( i ) 15 mm 163 ( ii ) 20 mm 164 ( iii ) 25 mm 165 ( iv ) 32 mm 166 ( v ) 40 mm 167 ( vi ) 50 mm 168 ( vii ) 65 mm 169 ( viii ) 80 mm 170 ( ix ) 100 mm 171 ( x ) 125 mm 172 ( xi ) 150 mm 173 [ j ] g.i. nipple of the following sizes 174 ( i ) 15 mm dia x 100 mm long 175 ( ii ) 20 mm dia x 100 mm long 176 ( iii ) 25 mm dia x 100 mm long 177 ( iv ) 32mm dia x 100 mm long 178 ( v ) 40 mm dia x 100 mm long 179 ( vi ) 50 mm dia x 100 mm long 180 ( vii ) 65 mm dia x 100 mm long 181 ( viii ) 80 mm dia x 100 mm long 182 ( ix ) 100 mm dia x 100 mm long 183 [ k ] g.i. pipes midium ( tata mark ) or equivalent as per is 1239 ( part 01 ) / 2004 isi marked / medium quality 184 ( i ) 15 mm dia 185 ( ii ) 20 mm dia 186 ( iii ) 25 mm dia 187 ( iv ) 32 mm dia 188 ( v ) 40 mm dia 189 ( vii ) 65 mm dia 190 mirrors ( m931 ) 191 ( a ) mirror of 6 mm thick plain glass 600 mm x 450 mm beveled edge mirror includingc.p. brass revolving fittings 3 mm plywood boardand c.p. hinges etc.to fix the mirror 192 ( b ) do 450 mm x 300 mm do 193 ( a ) glass shelf 600 mm x 125 mm with c.p. brass rail ( m932 ) 194 ( b ) do 450 mm x 125 mm do 195 ( a ) c.p. brass towel rail 20 mm x 600 mm with bracket all complete ( m933 ) 196 ( b ) anodized aluminum 20 mm x 600 mm towel rail complete with brackets 197 c.p. brass soap dish medium quality with screw andhinges etc. ( m934 ) 198 c.p. liquid soap solution holder ( m935 ) 199 vitreous white glazed indian water closet of hindustan / parry ware / cera / naycer or anyotherequivalent make ( m936 ) 200 ( a ) 580 mm long 201 ( b ) 510 mm long 202 ( c ) 450 mm long 203 ( d ) 510 mm long white glazed fiber i.w.c 204 pair of vetreous white glazed foot rest of hindustan / parryware / cera / naycer or any other equivalent make ( m937 ) 205 15 liters capacity pull and let go high level c.i. cistern complete with ball cock and a pair of bracket ( m938 ) 206 ( a ) 12.5 liters lowdown c.i. cistern ( m939 ) 207 ( b ) 10.0 liters capacity p.v.c. low design cistern 208 ( a ) white glazed vitreous e.w.c with p trap orany other equivalent make. ( m940 ) 209 ( b ) e.w.c with s trap 400 mm high of hindustan / parry ware / cera / naycear or any other equivalent make 210 ( c ) black / white plastic seat for e.w.c do as above. 211 ( a ) white glazed vitreous earthen were urinal flat back of hindustan / parryware / cera / naycer or any other equivalent make 600 mm x 350 mm size. ( m941 ) 212 ( b ) do squatting small 450 mm x 350 mm 213 ( c ) do squatting large 600 mm x 350 mm 214 ( d ) white glazed vitreous earthen ware urinal standing corner size 600 mm x 350 mm hindustan / parryware / cera / naycer or any other equivalent make 215 ( e ) partition plate for urinal 25 x 13 size 216 ( f ) 5 liters c.i. automatic cistern with all p.v.c fittings 217 white glazed vitreous wash hand basin 550 mm x 400mm size of hindustan / parryware / cera / naycer or any otherequivalent make. ( m942 ) 218 white glazed vitreous earthen ware kitchensinks of hindustan / parryware / cera / nayceror any other equivalent make ( m943 ) 219 ( a ) kitchen sink 600 mm x 450 mm x 200 mm ( 24 x 18 x 8 ) 220 ( b ) kitchen sink 600 mm x 450 mm x 250 mm ( 24 x 18 x 10 ) 221 ( c ) lab sink 450 mm x 300 mm x 150 mm ( 18 x 12 x 6 ) 222 ( d ) lab sink 300 mm x 250 mm x 150 mm ( 12 x 10 x 6 ) 223 drain board. ( m944 ) 224 ( a ) 600 mm x 450 mm ( 24 x 18 ) 225 ( b ) 525 mm x 450 mm ( 21 x 18 ) 226 h.c.i. pipes ( m945 ) 227 ( a ) 50 mm dia single socket 6 0 ( with ear weight 13 kg ) 228 ( b ) 80 mm dia single socket 6 0 ( with ear weight 18 kg ) 229 ( c ) 100 mm dia single socket 6 0 ( with ear weight 23 kg ) 230 ( d ) 150 mm dia single socket 6 0 ( with ear weight 30 kg ) 231 ( e ) 50 mm dia double socket 6 0 ( with ear weight 14 kg ) 232 ( f ) 80 mm dia double socket 6 0 ( with ear weight 19 kg ) 233 ( g ) 100 mm dia double socket 6 0 ( with ear weight 25 kg ) 234 ( h ) 150 mm dia double socket 6 0 ( with ear weight 13 kg ) 235 ( i ) 50 mm dia single socket 3 0 ( with ear weight 7.25 kg ) 236 ( j ) 80 mm dia single socket 3 0 ( with ear weight 10.5 kg ) 237 ( k ) 100 mm dia single socket 3 0 ( with ear weight 13.75 kg ) 238 ( l ) 150 mm dia single socket 3 0 with ear 239 ( m ) 50 mm dia single socket 2 0 ( with ear weight 5.35 kg ) 240 ( n ) 80 mm dia single socket2 0 ( with ear weight 8.00 kg ) 241 ( o ) 100 mm dia single socket 2 0 ( with ear weight 10.10 kg ) 242 ( p ) 150 mm dia single socket 2 0 with ear 243 ( q ) 50 mm dia single socket 1 0 ( with ear weight 3.4 kg ) 244 ( r ) 80 mm dia single socket 1 0 ( with ear weight 5.50 kg ) 245 ( s ) 100 mm dia single socket 1 0 ( with ear weight 7.60 kg ) 246 ( t ) 150 mm dia single socket 247 h.c.i. fittings. ( m946 ) 248 ( i ) plain bend of following size 249 ( a ) 50 mm dia ( weight without ear and socket 2.75 kg ) 250 ( b ) 80 mm dia ( weight without ear and socket 3.5 kg ) 251 ( c ) 100 mm dia ( weight without ear and socket 4.5 kg ) 252 ( d ) 150 mm dia ( weight without ear and socket 4.5 kg ) 253 ( ii ) bend with door with following size 254 ( a ) 50 mm dia ( wight without ear and socket 2.75 kg ) 255 ( b ) 80 mm dia ( wight without ear and socket 4.00 kg ) 256 ( c ) 100 mm dia do 5.5 kg 257 ( d ) 150 mm dia do 258 ( iii ) single junction with door of followings sizes. 259 ( a ) 50 mm dia ( weight without ear and socket 3.75 kg ) 260 ( b ) 80 mm dia ( weight without ear and socket 6.50 kg ) 261 ( c ) 100 mm dia do 9.50 kg 262 ( d ) 150 mm dia do 263 ( iv ) double junction with door of following sizes. 264 ( a ) 50 mm dia do 4.5 kg 265 ( b ) 80 mm dia do 7.00 kg 266 ( c ) 100 mm dia do 13.00 kg 267 ( d ) 150 mm dia do 268 ( v ) heel rest bend of following sizes 269 ( a ) 50 mm dia 270 ( b ) 80 mm dia 271 ( c ) 100 mm dia 272 ( d ) 150 mm dia 273 ( vi ) cowel of following sizes 274 ( a ) 50 mm dia ( weight without ear and socket 2.25 kg ) 275 ( b ) 80 mm dia ( weight without ear and socket 3.25 kg ) 276 ( c ) 100 mm dia ( weight without ear and socket 3.25 kg ) 277 ( d ) 150 mm dia do 278 ( vii ) 100 mm dia p trap ( wt without ear and socket ) 8.5 kg 279 ( viii ) 100 mm dia p trap ( wt without ear and socket ) 8.8 kg 280 ( ix ) 100 mm x 80 mm floor trap ( weight without ear and socket ) 4.00 kg 281 ( x ) pass over 50 mm x 150 mm for 50 mm projection 282 ( xi ) do 100 mm x 150 mm for 100 mm projection 283 ( xii ) inverted junction single 100 mm x 50 ( weight without ear and socket ) 9.0 kg 284 ( xiii ) inverted junction double 100 mm x 50 mm x 50 mm ( weight without ear and socket ) 12.0 kg 285 ( xiv ) h.c.i. offset 80 mm projection of the following size 286 ( a ) 50 mm dia ( weight without ear and socket ) 2.75 kg 287 ( b ) 80 mm dia do 3.50 kg 288 ( c ) 100 mm dia do 5.00 kg 289 ( d ) 150 mm dia do 290 ( xv ) h.c.i. socket of following sizes 291 ( a ) 50 mm dia ( weight without ear ) 1.50 kg 292 ( b ) 80 mm dia ( weight without ear ) 3.00 kg 293 ( c ) 100 mm dia ( weight without ear ) 4.50 kg 294 ( d ) 150 mm dia ( weight without ear ) do 295 c.i. cover with frame for manhole and inspection chamber. ( m947 ) 296 ( a ) 600 mm x 450 mm size ( wt. 39 kg ) 297 ( b ) 600 mm x 450 mm size ( wt. 25 kg ) 298 ( c ) 500 mm x 450 mm size ( wt. 25 kg ) 299 c.i. bracket pair for w.h.b. ( m948 ) 300 ( a ) 550 mm x 400 mm size ( 22 x 16 ) 301 ( b ) do for 12.5 liter cistern 302 ( c ) do for 600 mm x 450 mm ( 24 x 18 ) sink 303 ( d ) 40 mm x 60 mm ms plate bracket for sink as above 304 ( a ) 32 mm ( 1 1 / 4 ) c.p. brass waste for w.h.b ( m949 ) 305 ( b ) 40 mm ( 1 1 / 2 ) c.p. brass waste for w.h.b for sink 306 ( c ) 32 mm ( 1 1 / 4 ) c.p. waste of white metal 307 ( d ) 40 mm ( 1 1 / 2 ) c.p. waste of white metal 308 ( a ) 32 mm ( 1 1 / 4 ) p.v.c. waste pipe 750 mm long ( 26 long ) withbrass union for w h b ( m950 ) 309 ( b ) 40 mm ( 1 1 / 2 ) p.v.c. waste pipe 750 mm long ( 26 long ) with brass union for w h b 310 32 mm ( 1 1 / 4 ) p.v.c. telescopic flush pipe with brass union for high level cistern ( m951 ) 311 rubber inserttion 3 mm ( 1 / 8 ) thick ( m952 ) 312 pig lead ( m953 ) 313 yarn ( m954 ) 314 rubber gasket for c.i pipe of good quality ( m955 ) 315 ( a ) 80 mm 316 ( b ) 100 mm 317 ( c ) 125 mm 318 ( d ) 150 mm 319 ( e ) 200 mm 320 ( f ) 250 mm 321 ( g ) 300 mm 322 ( h ) 350 mm 323 ( i ) 400 mm 324 ( j ) 450 mm 325 ( k ) 500 mm 326 ( l ) 600 mm 327 ( m ) 700 mm 328 ( n ) 750 mm 329 ( o ) 800 mm 330 ( p ) 900 mm 331 ( q ) 1000 mm 332 ( r ) 1200 mm 333 cotton waste ( m956 ) 334 asbestos suta ( gland packing ) ( m957 ) 335 solvent cement ( m958 ) 336 hydrocloric acid ( sepecific gravity 1.20 ) ( m959 ) 337 cp & pvc fitting ( m960 ) 338 ( i ) 32 mm dia c.p. waste 339 ( ii ) 32 mm dia pv c waste pipe 750 mm long with coupling 340 ( iii ) 40 mm dia c.p. waste 341 ( iv 40 mm dia pvc waste pipe 750 mm long with coupling 342 ( v 100 mm dia steel jali 343 ( vi ) 15 mm dia c.p. nipple with coupling ( short pieces ) 344 ( vii ) 50 mm dia pvc pipe with coupling 345 special type of c.p. bath room fittings for v.i.p.buildings ( jal, jaquar, marc or equivalent mark ) ( m961 ) 346 ( i ) pillar cock ( isi ) 347 ( ii ) pillar cock ( long neck ) 348 ( iii ) bib cock ( isi ) 349 ( iv ) bib cock ( long thread ) 350 ( v ) angular stop cock 351 ( vi ) angular stop cock ( long thread ) 352 ( vii ) concealed stop cock reduce ( isi ) 353 ( viii ) concealed stop cock heavy duty extra adjustable wall flange 354 ( ix ) long body bib cock 355 ( x ) swan neck tap with left hand operating knob 356 ( xi ) central hole basin mixer ( best quality ) 357 ( xii ) wall mixer with telephonic shower arrangement 358 ( xiii ) wall mixer with provision for over head shower with elbow coupling and well flange 359 ( xiv ) wall mixer 3 in 1 system with provision for over head shower with elbow coupling and wall flange 360 ( xv ) sink mixer with swinging casted spout 361 ( xvi ) sink cock with swinging casted spout 362 ( xvii ) 4 way diverter for concealed fittings 363 ( xviii ) pressure adjustable shower with revolving joint 364 ( xix ) telephone shower with flexible pipe 365 ( xx ) flush cock with wall flange ( 25 mm ) 366 ( xxi ) towel rail 24 367 ( xxii ) towel ring 368 ( xxiii ) soap dish 369 ( xxiv ) tumbler holder 370 ( xxv ) toilet paper holder 371 ( xxvi ) glass shelf 22 372 ( xxvii ) corner glass shelf with bracket 373 ( xxviii ) flush valve complete with 32 mm size controlcock & flange 374 c.i special & pvc pipes ( m962 ) 375 1. c.i double shocketted fittings bend such as bend, tee, taper, 376 ( a ) 80 200 mm 377 ( b ) 250 700 mm 378 ( c ) 700 1000 mm 379 2. c.i double flange fittings such as tee, taper, tailpiece, bend etc 380 ( a ) 80 200 mm 381 ( b ) 250 700 mm 382 ( c ) 700 1000 mm 383 spare parts of hand pump 384 basic rate of upvc pipe 125mm dia conforming to i.s.i. latest revision is 12818 / 2016 cml no. 5543459 ( m1024 ) 385 rcc esr ( m1030 ) 386 designing ( aesthetically ) , and constructing rcc elevated service reservoirs of following capacity with rcc staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for esr having capacity upto 500 cum and not more than 6m c / c for esr having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the in side and out side face of the container and also plaster with plastic paint in all columns and bracingsincluding refilling disposing off the surplus stuff with in a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as m.s. ladder out side, stainless steel lader in contenor, c.i. manhole frame and covers, water level indicators, lightening conductor, g.i. pipe railing around walk way and top slab, providing stair case from ground level to roof level, m.s. grill gate of 2m height with locking arrangement of approved design, b.b. masonry chambers for all valves, ventilating shafts, providing and applying three coats of acrylie emulsion with silicon edditives paint to the structure incluingroof slab, epoxy painting to internal surface and anti termite treatment for under ground part soft he structure and giving satisfactory water tightness test as per i.s. code. the job to include painting then ame of the scheme and other details on thereservoir as per the directions of engineer in charge. 387 notes 388 the design of the structure be in accordance with relevant i.s. specification ( i.s. 3370 1965 or revised. ) 389 the design shall satisfy the stipulations as per i.s. 1893 1984 and i.s.13920 / 1993 for seismic force and i.s. 11682 / 1985 for r.c.c. staging of over head tanks. 390 for design having more than 6 columns, suitable bracing is obligatory. 391 plain round mild steel bars grade i conforming to i.s.432 part i orhigh yield strength deformed bars conforming to i.s. 1786 or i.s. 1139 shall beused, grade i imildsteel bars will not be allowed 392 irrespective of the type of foundation proposed in the design, one set of bracing be provided at the ground level. 393 these rates include providing m.s. ladder for e.s.r.s upto 2 lakh litres capacity and providing spiral stair case for e.s.r. above 2 lakh litres capacity. 394 staging shall have to bede signed with stresses of m 200 concrete for esr. however all rcc construction should be donein m 250. structures in contact with water shall be designed & casted in m 300 395 these rates are including the cost of up lift pressure if any and entire dewatering during execution. incase of water logging are a where water is struck at shallow depth, extra provision of dewatering shall be made as per site condition. 396 all conditions given in the member secretarys circular no. mjp / ts i / 350 / 1668 dt. 2 8 97 and mjp / s i / 350 / 2127 dt. 13 7 99 shall be strictly followed and additional cost, if any, due to these conditions is included in the rates mentioned below. 397 75 % part rate shall be payable for reinforcement concrete and plastering items of containers of e.s.r. till satisfactory hydraulic testing for water tightness is given; and till that work shall be treated as incomplete. 398 the rates indicated in the table are excluding the cost of pipes, specials and valves required for inlet, outlet, washout, overflow and bypass arrangement. the scope of work, however, includes cost of erecting, laying and jointing of pipe and valves including cost of jointing materials upto 5 m beyond outer face of outer most column ( cost of pipe, specials and valves is taken as 10% of the cost of esr as per table ) . 399 for esr upto 500 cum capacity c.i. double flanged pipes upto 300 mm dia shall be provided and c.i. specials shall be used. for esr above 500 cum capacity c.i. / m.s. pipe assembly with minimum 8 mm thickness upto 500 mm dia and minimum 10 mm thickness above 500 mm dia can be used with proper anti corrosive epoxy treatment from in side and out side. 400 below mentioned rates are for foundation swith individual footing with bearing capacity of 20 tonnes per square metre. for raft foundations, these rates shall be increased by 7.5% where safe bearing capacity ( sbc ) is 5 mt per sqm and by 5 % where sbc is more than 5mt / sqm and upto 10 mt / sqm. this % of5 % or 7. 5 % is applicable for estimation of amount of lumpsum item of esr. for extra item due to change from individual foundation to raft, actual increase in concrete and steel be paid as per relevant dsr item. 401 the rate shall be increased by 30 % for bearing piles upto depth of 10 m and for further increased in depth by 5 m each, it shall be increased by another 10%. these rates are applicable where raft is not feasible. for pile foundations sulphate resistant cement shall only beused. single pile for the column is not permitted, group of piles shall be designed with pile cap for each column of esr. 402 the rates are applicable for staging height of 12 m. these rates shall be increased or decreased for per metre variation in this staging height as below : 403 12 to 16 m staging 2% per metre 404 16 to 20 m staging 3% per metre 405 20 m and above 4% per metre 406 for 17 m staging height, percentage calculation will be like below : 407 12 to 16 m 4 x 2 = 8% 408 16 & 17 m 1 x 3% = 3% total = 11% 409 for 21 m staging height, percentage calculation will be like below : 410 12 to 16 m 4 x 2 = 8% 411 16 to 20 m 4 x 3% = 12% 412 20& 21 m 1 x 4% = 4% total = 24% 413 following rates are for seismic zone iii. for zone iv, these rates shall be increased by 5% and for zone ii, these rates shall be decreased by 5%. concerned executive engineer shall confirm the seismic zone for the scheme from seismic zone splan before estimation and adopt appropriate rates as per actual seismic zones. ( seismic maps attached in this csr ) . 414 notes 415 conditions from sr.no.1 to 10 shall form a part and parcel of the tender and must be included in the draft tender papers for works of r.c.c. e.s.r. 416 conditions from sr.no.11 to 16 are for estimation purpose only and shall not appear in the tender. 417 rates for rcc esrs 418 upto 25, 000 litres 419 cost of 25, 000 litres capacity 420 add for capacity above 25, 000 upto 50, 000 litres 421 cost of 50, 000 litres capacity 422 add for capacity above 50, 000 upto 75, 000 litres 423 cost of 75, 000 litres capacity 424 add for capacity above 75, 000 upto 1, 00, 000 litres 425 cost of 1, 00, 000 litres capacity 426 add for capacity above 1, 00, 000 upto 1, 50, 000 litres 427 cost of 1, 50, 000 litres capacity 428 add for capacity above 1, 50, 000 upto 2, 00, 000 litres 429 cost of 2, 00, 000 litres capacity 430 add for capacity above 2, 00, 000 upto 2, 50, 000 litres 431 cost of 2, 50, 000 litres capacity 432 add for capacity above 2, 50, 000 upto 3, 00, 000 litres 433 cost of 3, 00, 000 litres capacity 434 add for capacity above 3, 00, 000 upto 4, 00, 000 litres 435 cost of 4, 00, 000 litres capacity 436 add for capacity above 4, 00, 000 upto 5, 00, 000 litres 437 cost of 5, 00, 000 litres capacity 438 add for capacity above 5, 00, 000 upto 7, 50, 000 litres 439 cost of 7, 50, 000 litres capacity 440 add for capacity above 7, 50, 000 upto 10, 00, 000 litres 441 cost of 10, 00, 000 litres capacity 442 add for capacity above 10, 00, 000 upto 15, 00, 000 litres 443 cost of 15, 00, 000 litres capacity 444 add for capacity above 15, 00, 000 upto 20, 00, 000 litres 445 cost of 20, 00, 000 litres capacity 446 rcc gsr and sump ( m1031 ) 447 designing ( aesthetically ) , and constructing rcc ground service reservoirs / rcc sumps in m 300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top rcc roof slab / or dome, 20 mm thick cement plaster with water proofing compound in cm 1:3 proportion. to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 m, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye pass arrangement consisting of c.i. / m.s. d / f. pipes, specials and valves of given diameters, providing and fixing accessories such as m.s. ladder inside and outside, c.i. manhole frame and cover, water top slab, b.b. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per is code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. 448 anti –termite treatment shall be given for under ground portion of the structure. 449 notes 450 the design shall be in accordance with various relevant i.s. specification ( i.s.456 / 2000, i.s.875 1987, i.s.3370 1965 or revised. ) 451 only m.s. bars grade i conforming to i.s. 432 part i or high yield strength deformed bars conforming to i.s. 1786 or i.s.1139 shall be used.grade ii m.s. bars shall not be used. 452 entire structure shall be in m 300 only. 453 the scope of pipe assembly work shall be upto 5 metre beyond out side face of the wall, cost of pipes valves and specials is not included in the rate but labour cost for laying and jointing is included. 454 the g.s.r. / sump above 15 lakh litres capacity shall be in two compartment. 455 the job includes designing the structure for up lift pressure and dewatering if required during entire execution and disposal of surplus excavated stuff within lead of 50 metres as directed by engineer in charge. if up lifts considered in design, then these rates shall be increased by 7.5%. 456 g.s.r. outlets shall be with bell mouth of approved pattern in bottom slab and cost of designing bell mouth is included in the rate. sump well includes cost of suction pit required at bottom. 457 for pipe diameters upto 300mm only cipipes and ci specials shall be used. for pipe diameters above 300mm, m.s. pipes and specials minimum 10mm thick shall be used with proper anti corrosive epoxy treatment from inside and outside. 458 cost of pump house is not included in these rates. 459 above rates are applicable for seismic zones 2, 3 and 4. 460 75% part rate shall be payable for reinforcement, concrete and plastering items of all types of g.s.r. sand sump still satisfactory hydraulic testing for water tightness test is given and till that work shall be treated as incomplete. 461 10% shall be added for sump if over head pump house is proposed. 462 note: conditions from sr.no.1 to 11 shall form a part and parcel of tender and must be included in the draft tender papers for work of r.c.c .gsrs and sumps. 463 rates for rcc gsrs and sumps 464 upto 25, 000 litres 465 cost of 25, 000 litres capacity 466 add for capacity above 25, 000 upto 50, 000 litres 467 cost of 50, 000 litres capacity 468 add for capacity above 50, 000 upto 75, 000 litres 469 cost of 75, 000 litres capacity 470 add for capacity above 75, 000 upto 1, 00, 000 litres 471 cost of 1, 00, 000 litres capacity 472 add for capacity above 1, 00, 000 upto 1, 50, 000 litres 473 cost of 1, 50, 000 litres capacity 474 add for capacity above 1, 50, 000 upto 2, 00, 000 litres 475 cost of 2, 00, 000 litres capacity 476 add for capacity above 2, 00, 000 upto 3, 00, 000 litres 477 cost of 3, 00, 000 litres capacity 478 add for capacity above 3, 00, 000 upto 5, 00, 000 litres 479 cost of 5, 00, 000 litres capacity 480 add for capacity above 5, 00, 000 upto 10, 00, 000 litres 481 cost of 10, 00, 000 litres capacity 482 addforcapacityabove10, 00, 000upto15, 00, 000 litres 483 cost of 15, 00, 000 litres capacity 484 add for capacity above 15, 00, 000 litres 485 note: 10% shall be added over the cost of gsr for sump where over head pump house is proposed. 486 unconventionalwater treatment plant ( m1032 ) 487 designing ( aesthetically ) , providing and constructinghigh rate unconventionalwatertreatmentplant i.e. simplified water treatment plant consisting of civil works includingcostofprovidingandapplyingepoxypainttoinsidesurfaceofwaterretainingstructuresincontactwithchlorineandprovidinganti termitetreatmenttoentirestructurebelowgroundlevel, ceramic tiles for floring, acrylic emulsion with silicon additives paint from outside stainless steel railing, mechanicalandelectricalcomponentsofvarioussub worksasgivenbelow : includingnecessaryhydraulic testing, structuraltesting and trial for 3 months, etc. completeas directedbyengineer in charge ( turn key job ) works. 488 aeration fountain 489 inlet arrangements 490 mixing channel with ventury flume and flow measuring arrangement 491 inlet channel 492 flocculator conforming to i.s. 7208 1974 ( type c ) with detention period of 30 minutes 493 tube settlers designing, fabricating and constructing tube settlers with square or any other shaped tube like circular, cheveron, hexagonal etc .having proven performance 494 rapid sand gravity filters all valve shall be glandless. 495 filter house 496 chemical house 497 alum tanks 2nos. with mixing, carrying and dosing arrangements with piping. 498 100 kg chlorine cylender for capacity upto 5mld and chlorine tonner for capacity above 5 mld. 499 tcl solution tank with mixing, carrying and dosing arrangement with piping. 500 bypass arrangement 501 external and internal electrification 502 laboratory equipments 503 wash water tanks of capacity equal to12 minutes to wash specified number of filter beds at time at 600 lit / m2 / m under head of 12m at under drain. 504 wash water pumps with 100% standby 505 air blowers capable of delivering 600 lmp per square metre of free air of filter area at 0.4 kg / sqcm at the under drains ( 100 % standby ) .air blowers shall be adopted for wtp having capacity more than 3 mld only. below 3 mld capacity, air blowers shall not be adopted. 506 pure water sump of capacity equal to 1 hourpumping capacity. 507 pure water pump house over the sump / by the side of sump. 508 drainage arrangements 509 alum store 510 sanitary block with necessary water supply and drainage arrangements and internalwbm roads. 511 these rates are applicable for seismic zones 2, 3 and 4. 512 rates given below are inclusive of uplift pressure if any and dewatering during the entire work. 513 all rcc structures shall be constructed in m 250. structures in contact with water shall be in m 300. 514 unconventional treatment plants less than 1 mld capacity shall not be constructed. 515 all the structural steel works / fabrications are to be provided with application of hot dip zinc coating according to specification as per is 4759:1996 ( reafirmed 2006 ) . 516 note: conditions from sr. no. 1 to 28 shall form a part and parcel of the tender and must be included in draft tender papers for the work of unconventional treatment plants. 517 unconventional water treatment plant 518 fixed cost for 1 mld 519 add for capacity above 1 mld upto 2 mld 520 cost of 2 mld treatment plant 521 add for capacity above 2 mld upto 3 mld 522 cost of 3 mld treatment plant 523 conventionalwater treatment plant ( m1033 ) 524 designing ( aesthetically ) , providingconstructingandcommissioningconventionalwatertreatmentplantconsistingofallcivil, mechanicalandelectricalworks includingcostofprovidingandapplyingepoxypainttoinsidesurfaceofwaterretainingstructuresincontactwithchlorineandprovidingantitermitetreatmenttoentirestructurebelowgroundlevel, mechanicalandelectricalcomponentsofvarioussub worksasgivenbelow, includingnecessaryhydraulic testing, structuraltesting, equipmenttestingandtrialrunfora periodof3 months, etc. completeas directedbyengineer in charge ( turn key job ) . 525 aeration fountain plan are a not less than 0.625 square metre per mld 526 ventury flume with necessary devices, consisting of simple mechanical indicator. ( pedestal type gauge ) 527 flash mixer rapid mixing device, detention time 60 seconds to give velocity gradient 300 to 400 sec 1, vane mixer type conforming to i.s. 7090 of 1985. 528 flocculator – conforming to i.s.7208 1974 ( type c ) with detention period of 30 minutes. 529 clarifier horizontal flow circular tank, detention period 2 5 hours, overflow rate 30 cubic metre per square metre per day ( to be specified ) , weir loading not more than 300 cubic metre per metre per day, with mechanical sludge scraper conforming to i.s. no. 10313 1982. 530 rapid sand filter sand filter house filter designed for filteration rate of 5, 000 litres per square metre per hour, minimum 2 beds for plant upto 10 mld, for larger plants as specified, filters to be located in filter house with roof slab, pipe gallery and platform minimum 5.5 metre in width. 531 filtersand effective size 0.45 to 0.70mm, uniformity coefficient not more than 1.7, nor less than 1.3, depth of water over sand 0.75m, free board 50cm, gravel 0.45m in depth, sand and gravel conforming to i.s. 8491 ( i ) 77, back wash by air wash, stand ard appurtenances ( to be specified ) , rate of flow controller, filter gauge, sand expansion gauge, etc. 532 wash water tank capacity to be specified and suitable to supply water to wash 2 filter units at a time where the units are 4 or more. 533 wash water pumps capacity to fill water tank in 1 hour with 100% standby. 534 air blowers capable of delivering 600 lmp per square metre of free air, of filter area at 0.4kg / sqcm at the under drains ( 100% standby ) . 535 chemical house in two storeys 536 ground floor to accommodate 7 days alum requirement and sundry storage. 537 first floor to accommodate alum and lime tanks.etc. 538 solution tanks minimum 3 tanks ( one for preparation, second for dosing and third as standby ) , each tank capable of giving 8 hours maximum dose without interruption, minimum free board 0.30m, trays for dissolving, level indicator, mechanical agitation devices, solution feed and drain lines, solution feed device ( constant head device, strength of solution upto 10% only ) conforming to i.s. 9222 part i 1979. 539 pure water sump and sump house. 540 capacity of sump – one hour of designed flow. 541 pump house pump house of required size over the sump or by the side. 542 store house suitable for alum storage of three months requirement in monsoon with 10% extra capacity for other sundry articles. 543 vacuum feed type chlorinators make tobe approved by mjp. 544 conforming to i.s. 10533 a part ii 1983 545 rate for withdrawal 546 temperature kg. of chlorine discharge degree c per day ( cylinders ) 547 45 67 tonnes 548 10 6.359.50 110 549 15 10.75 16.10130 550 20 14.50 21.24254 551 27&above18.70 28.12315 552 chlorinator equipment and container room to conform to i.s. 10553 part i 1983. 553 100% standby shall be provided. 554 by pass arrangements c.i. or m.s. pipes. 555 disposal of waste from wtp: safe disposal arrangement to near by nala including cost of pipe 556 for wtp of capacity 30 mld and more additional arrangement for backwash water recycle shall be provided, including sump, pupming machinary, rising main etc complete 557 drainage arrangements – rcc pipes up to plot boundary. 558 electrical installation – both internal and external including entire plant area. 559 laboratory equipment –as per requirement ( to be specified during tendering ) . 560 sanitary blocks – carpet area 15 square metre minimum upto 25 mld and 25 square metre above 25 mld. 561 administrative block and internal road to accommodate office room, chlorine room, laboratory room, panel board room, blower room etc. and wbm road to connect all units from main gate of plot. 562 rates given below are inclusive of up lift pressure if any and dewatering during entire work. 563 all pipes condutes channels with20%overloading 564 these rates are applicable for seismic zones 2, 3 and 4. 565 all rcc structures shall be constructed in m 300. 566 note: conditions from sr. no. 1 to 22 shall form a part and parcel of the tender and must be incorporated in draft tender papers of conventional treatment plants ( proposed ) . 567 conventional water treatment plant 568 above3 mld to upto 5 mld 569 cost of 5 mld treatment plant 570 add for capacity above 5mld upto 10 mld 571 cost of 10 mld treatment plant 572 add for capacity above 10 mld upto20 mld 573 cost of 20 mld treatment plant 574 add for capacity above 20 mld upto 50 mld 575 cost of 50 mld treatment plant 576 add for capacityabove 50 mld upto 100 mld 577 cost of 100 mld treatment plant 578 add for capacity above 100 mld 579 gpt / hygpt : drilling by rotary drill machine of size 300mm & 400mm dia with t.c. drill bit for tubewells in all kinds of soil including moorum, hard soil, soil mixed with pebbles, shingles, compacted soil, clay, soft and decomposed rock etc, up to 60 meters depth including reaming to facilitate smooth lowering of casing pipe etc. as per specification and direction of e / i ( basic rates ) ( m1034 ) 580 300 mm dia for gpt 581 400 mm dia for hygpt 582 hydt : cost of drilling 200 mm x 165 mm x 125 meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic dth rig machine, all complete including supplying all materials, tools, drilling rig, air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicles up to the site ( basic rates ) ( m1035 ) 583 from 0 50 meter 584 from 51 125 meter 585 dt :basic rates for 125 / 115 mm dia drilled tube well for drilling in all kinds of soil and rock for installation of hand pump with dth rig machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125 / 115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and dirrection of engineer incharge ( basic rates ) ( m1037 ) 586 drillig upto 30 mtr depth below g. l. in rural area 587 drilling beyond 31 mtr upto 60 mtr below g. l. in rural area 588 trenchless ( m1038 ) 589 installation of product pipe by manual pipe jacking method including making of entry and exit pits all related civil works like excavation , shoring / strutting etc manual shielded excation , lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 590 from 900 mm to 1000 mm dia 591 in soft soil 592 in hard soil 593 in sandy soil 594 in stone soil 595 from 1000 mm to 1200 mm dia 596 in soft soil 597 in hard soil 598 in sandy soil 599 in stone soil 600 above 1200 mm to 1500 mm dia 601 in soft soil 602 in hard soil 603 in sandy soil 604 in stone soil 605 installation of product pipe by auger boring methodincluding making of entry and exit pits all related civil works like excavation , shoring / strutting etc shielded excavation , through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 606 upto 300 mm dia 607 in soft soil 608 in hard soil 609 in sandy soil 610 in stone soil 611 above300 mm to 450 mm dia 612 in soft soil 613 in hard soil 614 in sandy soil 615 in stone soil 616 above 450 mm to 600 mm dia 617 in soft soil 618 in hard soil 619 in sandy soil 620 in stone soil 621 above 600 mm to 900 mm dia 622 in soft soil 623 in hard soil 624 in sandy soil 625 in stone soil 626 installation of product pipe by guided auger boring methodincluding making of entry and exit pits all related civil works like excavation , shoring / strutting etc shielded excavation , through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 627 upto 300 mm dia 628 in soft soil 629 in hard soil 630 in sandy soil 631 in stone soil 632 above300 mm to 450 mm dia 633 in soft soil 634 in hard soil 635 in sandy soil 636 in stone soil 637 above 450 mm to 600 mm dia 638 in soft soil 639 in hard soil 640 in sandy soil 641 in stone soil 642 above 600 mm to 900 mm dia 643 in soft soil 644 in hard soil 645 in sandy soil 646 in stone soil 647 providing and supplying isi mark ci / d / f reflux valves ( non return valves ) of following dia inspection charges unloading from railway wagon , loading into truck transportation upto department stores / site unloading stacking etc. complete reflux valve as per is 5312 part i ( 1984 ) ( m1039 ) 648 without byepass arrangement pn 1 649 50 mm 650 65 mm 651 80 mm 652 100 mm 653 125 mm 654 150 mm 655 200 mm 656 250 mm 657 300 mm 658 350 mm 659 400 mm 660 450 mm 661 500 mm 662 600 mm 663 700 mm 664 750 mm 665 800 mm 666 900 mm 667 1000 mm 668 1100 mm 669 1200 mm 670 with byepass arrangement pn 1 671 50 mm 672 65 mm 673 80 mm 674 100 mm 675 125 mm 676 150 mm 677 200 mm 678 250 mm 679 300 mm 680 350 mm 681 400 mm 682 450 mm 683 500 mm 684 600 mm 685 700 mm 686 750 mm 687 800 mm 688 900 mm 689 1000 mm 690 1100 mm 691 1200 mm 692 without byepass arrangement pn 1.6 693 50 mm 694 65 mm 695 80 mm 696 100 mm 697 125 mm 698 150 mm 699 200 mm 700 250 mm 701 300 mm 702 350 mm 703 400 mm 704 450 mm 705 500 mm 706 600 mm 707 with byepass arrangement pn 1.6 708 50 mm 709 65 mm 710 80 mm 711 100 mm 712 125 mm 713 150 mm 714 200 mm 715 250 mm 716 300 mm 717 350 mm 718 400 mm 719 450 mm 720 500 mm 721 600 mm 722 providing double flange sluice valve ( size 50 mm to 1200 mm ) confirming for is 2906 / 14846 including worn gear arrangements as per test pressure stailess steel spindle , caps transportation etc. all complete . 723 with byepass arrangement pn 1 724 50 mm 725 65 mm 726 80 mm 727 100 mm 728 125 mm 729 150 mm 730 200 mm 731 250 mm 732 300 mm 733 350 mm 734 400 mm 735 450 mm 736 500 mm 737 600 mm 738 700mm 739 750 mm 740 800 mm 741 900 mm 742 1000 mm 743 1100 mm 744 1200mm 745 without byepass arrangement pn 1 746 50 mm 747 65 mm 748 80 mm 749 100 mm 750 125 mm 751 150 mm 752 200 mm 753 250 mm 754 300 mm 755 350 mm 756 400 mm 757 450 mm 758 500 mm 759 600 mm 760 700mm 761 750 mm 762 800 mm 763 900 mm 764 1000 mm 765 1100 mm 766 1200mm 767 providing double flange sluice valve confirming for is 2906 / 14846 including worn gearas per test pressure stailess steel spindle , caps transportation etc. all complete for rateincluding all taxes . . 768 without byepass arrangement pn 1.6 769 50 mm 770 65 mm 771 80 mm 772 100 mm 773 125 mm 774 150 mm 775 200 mm 776 250 mm 777 300 mm 778 350 mm 779 400 mm 780 450 mm 781 500 mm 782 600 mm 783 700mm 784 750 mm 785 800 mm 786 900 mm 787 1000 mm 788 1100 mm 789 1200mm 790 with byepass arrangement pn 1.6 791 50 mm 792 65 mm 793 80 mm 794 100 mm 795 125 mm 796 150 mm 797 200 mm 798 250 mm 799 300 mm 800 350 mm 801 400 mm 802 450 mm 803 500 mm 804 600 mm 805 design and supply of v wire screen laterals suitable for infiltration galleryas per site condition and detail provided end connection suitable flange excluding taxes and transportation . ( m1040 ) 806 dia 06 inch ( 150 mm ) 807 id 153 mm od 167 mm 808 screen thickness 07 mm 809 slot 1.00 mm 810 moc lowcarbon galvenised steel 811 length 5 mtr. 812 dia 08 inch ( 200 mm ) 813 id 205 mm od 221mm 814 screen thickness 08 mm 815 slot 1.00 mm 816 moc lowcarbon galvenised steel 817 length 5 mtr. 818 dia 10 inch ( 250 mm ) 819 id 256 mm od 276mm 820 screen thickness 10 mm 821 slot 1.00 mm 822 moc lowcarbon galvenised steel 823 length 5 mtr. 824 dia 12 inch ( 300 mm ) 825 id 306 mm od 326 mm 826 screen thickness 10 mm 827 slot 1.00 mm 828 moc lowcarbon galvenised steel 829 length 5 mtr. 830 dia 14 inch ( 350 mm ) 831 id 338 mm od 363 mm 832 screen thickness 12.5 mm 833 slot 1.00 mm 834 moc lowcarbon galvenised steel 835 length 5 mtr. 836 supplying all materials, labours, equipments for lowering 125mm dia blue upvc casing pipe as casing for protecting the sides from falling during the process of drilling all complete including carriage of materials to work site ( basic rate ) . ( m1041 ) 837 supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per dirction e / i ( basic rate ) . ( m1042 ) 838 supplying labour cement and calcium chloride or bentonite solution and equipments for grouting the casing pipe after lowering in the bore including carriage of materials to work site etc. all complete as per specification & direction of e / i ( basic rate ) . ( m1043 ) 839 supplying labour and equipments including 125mm dia g.i. cap and fitting and fixing over the casing pipe of tube well properly and taking it out as per direction e / i ( the cap will be the property of department ) ( basic rate ) . ( m1044 ) 840 supplying all materials, labours, equipments for constructing p.c.c. ( 1:2:4 ) circular platform around drilled tube well including 12mm thick cement plaster ( 1:4 ) with neat cement punning over exposed surface as per unicef design, etc. all complete including carriage of materials ( basic rate ) . ( m1045 ) 841 supplying all materials, labours and equipments for constructing p.c.c. ( 1:2:4 ) drain as per unicef design etc. all complete including carriage of materials ( basic rate ) . ( m1046 ) 842 supplying extra deep well hand pump complete sets with cylinder assembly & connecting rod ( 12 pcs ) as per is : 15500 part 2 / 2004 ( basic rate ) . ( m1047 ) 843 supply of 200mm dia x 3.00m long upvc casing pipe conferming to is : 12818: 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . ( m1048 ) 844 supply of 200mm dia ribbed screen pipe conferming tois : 12818: 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . ( m1049 ) 845 supply of 125mm dia ribbed screen pipe conferming tois : 12818: 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . ( m1050 ) 846 supplying all tools, equipments and labour and lowering 32 mm dia medium quality g.i. pipe in drilled tube well in 3 mtrs. length all complete as per dirction e / i including carriage of materials ( basic rate ) . ( m1051 ) 847 supplying all tools, labour for fitting and fixing deep well cylinder with necessary connecting rod complete job as per specification & direction of e / i including carriage of materials ( basic rate ) . ( m1052 ) 848 supplying all materials, labours and fixing india mark ii hand pump with all accessories all complete job as per direction of e / i including carriage of materials ( basic rate ) . ( m1053 ) 849 design, supply, installation testing & commissioning of packaged water treatment plants ( unconventional type ) of different capacity with ( 20 hours operation ) comprising of lamella clarifier, static mixture flocculation tank ( smet ) , multi grade filter ( mgf ) with best quality filter media, lime / coagulant / polymer dosing system hypo chloride dosing system, raw water feed pump / clear water transfer pump ( either or ) , sludge transfer cum recirculation pump, filter feed pump & back wash pump including all fitting like valve and other special fittings and electrical power supply to the different supplied units with mcb panel internal electrification with lighting arrangement with treatment plant site with provision of chemical storage and water testing boratoryfacility should be from a reputed manufacturer / authorized distribution / authorized dealer conforming to relevant is codes and certified by iso 9001 2008 & 14001, it also include cost of civil foundation, including clarified water tank internal connecting pipe line from raw water inlet to cwr and applying internal epoxy paint on the supply equipment all the prices are exclusive of gst, allied structure / items which are site specific such as external electrification, approach road, foot bridge, cofferdam, compound wall, scada and automation, cwr pumps etc are to be considered extra. ( m1054 ) 850 packaged lamella clarified type wtp with mgf capacity in mld. 851 0.2 852 0.3 853 0.4 854 0.5 855 0.6 856 pumps ( m1055 ) 857 supplying100 mm dia submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene / noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single / double run shall be provided with each pump. 858 submersible pump set 100 mm dia ( with polypropylene / noryl impeller ) up to 20 stages 859 1 h.p. 860 1.5hp 861 2 hp 862 2.5 hp 863 3.0 hp 864 4.0 hp 865 5.0 hp 866 supply rate should be increased by rs 200 / per stage for pump with more than 20 stages 867 submersible pump 150 mm dia ( with bronze impeller ) up to 8 stages 868 1.5 hp 869 2.0 hp 870 3.0 hp 871 4.0 hp 872 5.0 hp 873 6.0 hp 874 7.5 hp 875 supply rate should be increased by rs 600 / per stage for pump with more than 8 stages 876 submersible pump 150 mm dia ( with bronze impeller ) up to 12 stages 877 8.0 hp 878 9.0 hp 879 10.0 hp 880 11.0 hp 881 12.5 hp 882 15.0 hp 883 supply rate should be increased by rs 600 / per stage for pump with more than 12 stages 884 submersible pump 150 mm dia ( with bronze impeller ) up to 20 stages 885 17.5 hp 886 20.0 hp 887 25 hp 888 1 ) supply rate should be increased by rs 600 / per stage for pump with more than 20 stages for bore well only. 889 for other use 200 mm dia pump shall be preferred over 150 mm dia with more than 20 stage pump. 890 2 ) for 150 mm dia energy efficient pumps add as below 891 a. up to 8 stages : 3% on supply rate 892 b. up to 12 stages : 4% on supply rate 893 c. up to 15 stages : 5% on supply rate 894 pressure gauge ( m1056 ) 895 providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint 896 pressure gauge ( 100 mm dia ) 897 pressure gauge ( 150 mm dia ) 898 vacuum / combination gauge 899 supplyingvacuum gauge / combination gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia g.i. pipe. 900 vacuum / combination gauge – 100 mm dia 901 vacuum / combination gauge – 150 mm dia 902 lifting equipment ( m1057 ) 903 chain pulley block 904 supplyingtriple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark. 905 1 tonne capacity 906 2 tonne capacity 907 3 tonne capacity 908 hand operated circular or rectangular travelling crane ( single girder ) 909 supplyingsingle girder hand operated circular / rectangular travelling crane with 6 m lift complete with chain pulley block isi marked and travelling trolley both tested for 50% overload including arrangement for longitudinal travel / circular travel and cross travel with wheel, hand chain, etc complete. 910 3 tonne capacity 911 up to 5 m span 912 above 5 m up to 6 m span 913 above 6 m up to 8 m span 914 5 tonne capacity 915 up to 5 m span 916 above 5 m up to 6 m span 917 above 6 m up to 8 m span 918 above 8 m up to 10 m span 919 electric operated circular or rectangular travelling crane ( single girder ) 920 supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block. 921 5 tonne capacity 922 above 6 m up to 8 m span 923 above 8 m up to 10 m span 924 7.5 tonne capacity 925 above 6 m upto 8 m span 926 above 8 m up to 10 m span 927 10 tonne capacity 928 above 6 m up to 8 m span 929 above 8 m up to 10 m span 930 square bar / rail 931 providing, erecting and fixing square bar of en 8 as rail for over head crane on provided track, girder / continuous corbel beam, including supporting plate and “j” bolts. 932 50 x 50 mm ( en 8 ) 933 40 x 40 mm ( en 8 ) 934 lightening arrester, ab switch, insulators ( m1058 ) 935 lightening arrestor 936 supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line. 937 suitable for 11 kv supply, distribution class 938 suitable for 22 kv supply, distribution class 939 suitable for 33 kv supply, station class 940 disc insulator 941 supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm 942 suitable for 11kv line 943 suitable for 33kv line 944 pin insulator 945 supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm 946 suitable for 11kv line 947 suitable for 33kv line 948 air break switch without earth switch 949 supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps 950 suitable for 11kv line 951 rocking / tilting type 952 rotating type 953 suitable for 33kv line 954 rocking / tilting type 955 rotating type 956 air break switch with earth switch 957 supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps 958 suitable for 11kv line 959 rotating type 960 suitable for 33kv line 961 rotating type 962 drop out fuse ( channel mounted ) 963 supplying, erecting approved make out door type drop out fuse channel type with insulator complete with fuse holders fuse barrel with metal fittings, fuse element, with working currentup to 50 amp, capacity completeerected on provided cross arm, each set comprising 3 units 964 suitable for 11 kv line 965 suitable for 33 kv line 966 horn gap fuse ( channel mounted ) 967 supplying, erecting approved make out door type horn gap type fuse with insulator, fuse element, with working current up to 50 amp, capacity complete erected on provided cross arm, each set comprising 3 units 968 suitable for 11 kv line 969 suitable for 33 kv line 970 transformer ( m1059 ) 971 power transformer ( with off load tap changer ) any isi mark 972 supplyingoutdoor type copper wound transformer continuously rated for 3ph, 50 hz, at full load and temp. rise not exceeding 450 c by thermometer in oil and 500 c by theresistance in winding after continuous run at full load rating, thetransformer should have oil immersed winding having vector group dy11, ht side connected in delta and lt side connected in star with neutral brought out connected to provideseparateearthing. the transformer shall have power terminal arrangement, bushing / cable end box on ht side and cable end box on lt side. 2 nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. the transformer should have following standard fittings. transformer shall be latest manufacturing standards as per amended is specifications and the load & no load losses shall be limited to the values given below or as per is or norms issued by seb which ever are lower 973 1. oil conservator with filling hole with cap and plain oil level gauge. 974 2. silica gel dehydrating breather charged with silica gel. 975 3. oil drain valve 976 4. oil filter valve 977 5. lifting eyes / hooks 978 6. two earthing terminals 979 7. diagram and rating plate 980 8. air vent 981 9. explosion vent 982 10. 100mm dia thermo meter with thermometer pocket 983 11. four bi directional plain roller. 984 power transformer 11000 / 433 volts with off load tap changer – 12.5% to +2.5% in steps of 2.5% as per bis level 2. 985 63 kva ( no load loss 180w and load loss 1235w ) 986 100 kva ( no load loss 260w and load loss 1760w ) 987 160kva ( no load loss 260w and load loss 1760w ) 988 200kva ( no load loss 500w and load loss3000w ) 989 250kvaa ( no load loss 550w and load loss3600w ) 990 315kva ( no load loss 580w and load loss 4200w ) 991 400 kva ( no load loss 715w and load loss 5000w ) 992 500 kva ( no load loss 850w and load loss 5800w ) 993 630 kva ( no load loss 1000w and load loss 7000w ) 994 750 kva ( no load loss 1500w and load loss 8000w ) 995 power transformer ( with on load tap changer ) 996 supplyingoutdoor type copper wound transformer continuously rated for 3ph, 50 hz, at full load and temp. rise not exceeding 450 c by thermometer in oil and 500 c by theresistance in winding after continuous run at full load rating, thetransformer should have oil immersed winding having vector group dy11, ht side connected in delta and lt side connected in star with neutral brought out connected to provideseparateearthing. the transformer shall have power terminal arrangement, bushing / cable end box on ht side and cable end box on lt side. 2nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. the transformer should have following standard fittings. the oltc should be suitable for minimum 50 operations per day. transformer shall be latest manufacturing standards as per amended is specifications and the load & no load losses shall be limited to the values given below or as per is or norms issued by seb which ever are lower 997 1. oil conservator with filling hole with cap and plain oil level gauge. 998 2. silica gel dehydrating breather charged with silica gel. 999 3. oil drain valve 1000 4. oil filter valve 1001 5. lifting eyes / hooks 1002 6. two earthing terminals 1003 7. diagram and rating plate 1004 8. air vent 1005 9. explosion vent 1006 10. 100mm dia thermo meter with thermometer pocket 1007 11. four bi directional plain roller. 1008 12. buchholz relay 1009 13. resistance temp. detector 1010 14. marshalling box 1011 15. automatic voltage regulator ( avr ) 1012 16. remote tap changing controller ( rtcc ) 1013 transformer 11000 / 433 volts withon load tap changer – 15% to +5% in steps of 1.25% with rtcc, avr and marshalling box and other specification as per bis level 2. 1014 750 kva 1015 1000 kva 1016 1250 kva 1017 1600 kva 1018 2000 kva 1019 motors ( m1060 ) 1020 foot mounted motors tefc 1500 rpm 1021 supplyingfoot mounted tefc 1500 rpm, squirrel cage induction motor, conforming to is 325 having continuous rating suitable for operation at 415 volts + / 10%, 3 phase, 50 hz + / 3% with “f” class insulation temperature rise limited to class “b” insulation. motors conform to is 12615 with efficiency level ie3 and provided with enclosure protection class ip 55. 1022 15 kw ( 20 hp ) 1023 18.5 kw ( 25 hp ) 1024 22 kw ( 30 hp ) 1025 30 kw ( 40 hp ) 1026 37 kw ( 50 hp ) 1027 45 kw ( 60 hp ) 1028 55 kw ( 75 hp ) 1029 75 kw ( 100 hp ) 1030 90 kw ( 120 hp ) 1031 110 kw ( 150 hp ) 1032 132kw ( 180hp ) 1033 160kw ( 215 hp ) 1034 250kw ( 335 hp ) 1035 foot mounted motor tefc 1500 rpm 1036 0.75 kw ( 1hp ) 1037 1.1 kw ( 1.5 hp ) 1038 1.5 kw ( 2 hp ) 1039 2.2 kw ( 3 hp ) 1040 3.7 kw ( 5 hp ) 1041 5.5 kw ( 7.5 hp ) 1042 7.5 kw ( 10 hp ) 1043 9.3 kw ( 12.5 hp ) 1044 11 kw ( 15 hp ) 1045 aluminium cable ( m1061 ) 1046 cable 1047 aluminium conductor three core, xlpe / pvc insulated & armoured cable . 1048 supplyingxlpe / pvc insulated, armoured cable 1100 v grade with isi mark three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1049 3 core 2.5 sq mm 1050 3 core 4 sq mm 1051 3 core 6 sq mm 1052 3 core 10 sq mm 1053 3 core 16 sq mm 1054 3 core 25 sq mm 1055 3 core 35 sq mm 1056 3 core 50 sq mm 1057 3 core 70 sq mm 1058 3 core 95 sq mm 1059 3 core 120 sq mm 1060 3 core 150 sq mm 1061 3 core 185 sq mm 1062 3 core 240 sq mm 1063 3 core 300 sq mm 1064 3 core 400 sq mm 1065 aluminium conductor 3.5 core, xlpe / pvc insulated & unarmoured cable 1066 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three and half core, stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, completein an approved manner. 1067 3.5 core 25 sq mm 1068 3.5 core 35 sq mm 1069 3.5 core 50 sq mm 1070 3.5 core 70 sq mm 1071 3.5 core 95 sq mm 1072 3.5 core 120 sq mm 1073 3.5 core 150 sq mm 1074 3.5 core 185 sq mm 1075 3.5 core 240 sq mm 1076 3.5 core 300 sq mm 1077 3.5 core 400 sq mm 1078 ht aluminium three core 3.3 kve cable xlpe insulated 1079 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1080 3 core 35 sq mm 1081 3 core 50 sq mm 1082 3 core 70 sq mm 1083 3 core 95 sq mm 1084 3 core 120 sq mm 1085 3 core150sq mm 1086 3 core 185 sq mm 1087 3 core 240sq mm 1088 3 core 300 sq mm 1089 3 core 400 sq mm 1090 ht aluminium three core 6.6 kv ( ue ) / 11kv ecable xlpe insulated 1091 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1092 3 core 35 sq mm 1093 3 core 50 sq mm 1094 3 core 70 sq mm 1095 3 core 95 sq mm 1096 3 core 120 sq mm 1097 3 core150sq mm 1098 3 core 185 sq mm 1099 3 core 240sq mm 1100 3 core 300 sq mm 1101 3 core 400 sq mm 1102 ht aluminium three core 11kv ( ue ) cable xlpe insulated 1103 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1104 3 core 35 sq mm 1105 3 core 50 sq mm 1106 3 core 70 sq mm 1107 3 core 95 sq mm 1108 3 core 120 sq mm 1109 3 core150sq mm 1110 3 core 185 sq mm 1111 3 core 240sq mm 1112 3 core 300 sq mm 1113 3 core 400 sq mm 1114 aluminium conductor three core, xlpe / pvc insulated & unarmoured cable . 1115 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1116 3 core 4 sq mm 1117 3 core 6 sq mm 1118 3 core 10 sq mm 1119 3 core 16 sq mm 1120 3 core 25 sq mm 1121 3 core 35 sq mm 1122 3 core 50 sq mm 1123 3 core 70 sq mm 1124 3 core 95 sq mm 1125 3 core 120 sq mm 1126 3 core 150 sq mm 1127 3 core 185 sq mm 1128 3 core 240 sq mm 1129 3 core 300 sq mm 1130 3 core 400 sq mm 1131 copper cable ( m1062 ) 1132 cable 1133 3 core pvc insulated, pvc sheathed copper conductor flat submersible cable . 1134 supplying , flat flexible submersible cable with, copper conductor, pvc insulated, and pvc sheathed . 1135 3 core 1.5 sq mm 1136 3 core 2.5 sq mm 1137 3 core 4 sq mm 1138 3 core 6 sq mm 1139 3 core 10 sq mm 1140 3 core 16 sq mm 1141 3 core 25 sq mm 1142 3 core 35 sq mm 1143 copper conductor three core, xlpe / pvc insulated & unarmoured cable . 1144 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1145 3 core 1.5 sq mm 1146 3 core 2.5 sq mm 1147 3 core 4 sq mm 1148 3 core 6 sq mm 1149 3 core 10 sq mm 1150 3 core 16 sq mm 1151 3 core 25 sq mm 1152 3 core 35 sq mm 1153 3 core 50 sq mm 1154 3 core 70 sq mm 1155 3 core 95 sq mm 1156 copper conductor 3.5 core, xlpe / pvc insulated & armoured cable . 1157 supplyingxlpe / pvc insulated, armoured cable 1100 v grade with isi mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, completein an approved manner. 1158 3.5 core 1.5 sq mm 1159 3.5 core 2.5 sq mm 1160 3.5 core 4 sq mm 1161 3.5 core 6 sq mm 1162 3.5 core 10 sq mm 1163 3.5 core 16 sq mm 1164 3.5 core 25 sq mm 1165 3.5 core 35 sq mm 1166 3.5 core 50 sq mm 1167 3 .5 core 70 sq mm 1168 3.5 core 95 sq mm 1169 3.5 core 120 sq mm 1170 3 .5 core150sq mm 1171 3.5 core 185 sq mm 1172 3.5 core 240sq mm 1173 3.5 core 300 sq mm 1174 3.5 core 400 sq mm 1175 copper conductor 3.5 core xlpe / pvcunarmoured 1176 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1177 3.5core 25 sq mm 1178 3.5core 35 sq mm 1179 3.5 core 50 sq mm 1180 3.5 core 70 sq mm 1181 3.5 core 95 sq mm 1182 3.5 core 120 sq mm 1183 3.5 core150sq mm 1184 3.5 core 185 sq mm 1185 3.5 core 240sq mm 1186 3.5 core 300 sq mm 1187 3.5 core 400 sq mm 1188 copper conductor three core, xlpe / pvc insulated & armoured cable . 1189 supplyingxlpe / pvc insulated, armoured cable 1100 v grade with isi mark three core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1190 3 core 1.5 sq mm 1191 3 core 2.5 sq mm 1192 3 core 4 sq mm 1193 3 core 6 sq mm 1194 3 core 10 sq mm 1195 3 core 16 sq mm 1196 3 core 25 sq mm 1197 3 core 35 sq mm 1198 3 core 50 sq mm 1199 3 core 70 sq mm 1200 3 core 95 sq mm 1201 3 core 120 sq mm 1202 3 core 150sq mm 1203 3core 185 sq mm 1204 3 core 240 sq mm 1205 3 core 300 sq mm 1206 3 core 400 sq mm 1207 foot valve ( m1063 ) 1208 foot valve 1209 supplying c.i. foot valve having single leather flap and gunmetal seating. valve shall be fixed on suction side of pump as per requirement including jointing material and hardware. 1210 flanged type 1211 50 mm 1212 65 mm 1213 80 mm 1214 100 mm 1215 125 mm 1216 150 mm 1217 aircircuit breaker ( m1064 ) 1218 acbbreaking capacity 50ka thermal magnetic manual draw out type 3 pole 1219 630a 1220 800a 1221 1000a 1222 1250a 1223 1600a 1224 2000a 1225 starter ( m1065 ) 1226 d.o.l. starter with ss enclosure with 380 / 415 volt coil 1227 7.5 h.p. 1228 10 h.p. 1229 supplyingfully automatic star delta starter to operate induction motor working on415v, 3phase, 50 hz with no volt coil, over load element, on off push buttons, with necessary materials and connected to supply, etc complete starter with original sheet steel encloser 1230 f.a.s.d starter 1231 10.0 h.p. 1232 15 h.p. 1233 20 h.p. 1234 25 h.p. 1235 35 h.p. 1236 40 hp 1237 50 hp 1238 75 h.p. 1239 100 h.p. 1240 125 h.p. 1241 150 h.p. 1242 250 h.p. 1243 servo controlled automatic voltage stabilizer ( m1066 ) 1244 providing, erecting servo controlled automatic voltage stabiliser suitable for out put voltage of 415 volt + / 1%, 3 ph, 50 hz, with copper wound transformer ( air / oil cooled ) as mentioned below. the stabilizer shall function satisfactorily even if incoming supply is unbalanced between phases within range of 10%. the stabilizer should be constructed in cubical box, with bidirectional wheels for easy handling, necessary monitors and users controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and out put voltage, auto / manual selector switch, raise / low push buttons etc. suitable capacity termination strips and bus bars for incoming and out going cable should be provided. all three phases shall be independently monitored and corrected. following protections and indications shall be incorporated 􀂌 over voltage / under voltage 􀂌 single phasing 􀂌 cut off contactor with electronic output sensing unit 1245 servo controlled automatic voltage stabiliser ( out put 415 + / 1% ) input 150 to 450 volt 1246 20 kva air cooled 1247 25 kva air cooled 1248 30 kva air cooled 1249 40 kva air cooled 1250 50 kva oil cooled 1251 60 kva oil cooled 1252 75 kva oil cooled 1253 100 kva oil cooled 1254 125 kva oil cooled 1255 servo controlled automatic voltage stabiliser ( out put 415 + / 1% ) input 280 to 460 volt 1256 15 kva air cooled 1257 20 kva air cooled 1258 25 kva air cooled 1259 30 kva air cooled 1260 40 kva air cooled 1261 50kva air cooled 1262 60 kva oil cooled 1263 75kva oil cooled 1264 100 kva oil cooled 1265 125 kva oil cooled 1266 150 kva oil cooled 1267 200kva oil cooled 1268 250kva oil cooled 1269 300 kva oil cooled 1270 400 kva oil cooled 1271 termination kit ( m1067 ) 1272 providing and errecting in door type termination kit, for 3.3kv / 6.6 kv / 11kv / 22kv / 33kv xlpe screened 3 core cable 1273 in door termination kit for 3.3kv ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1274 25 50 mm2 1275 70 120 mm2 1276 150 185 mm2 1277 240 400 mm2 1278 out door termination kit for 3.3 ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1279 25 50 mm2 1280 70 120 mm2 1281 150 185 mm2 1282 240 400 mm2 1283 straight through joint for 3.3kv ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1284 25 50 mm2 1285 70 120 mm2 1286 150 185 mm2 1287 240 300 mm2 1288 in door termination kit for 11kv ( e ) xlpe screened 3 core cable 1289 25 50 mm2 1290 70 120 mm2 1291 150 185 mm2 1292 240 400 mm2 1293 out door termination kit for 11kv ( e ) xlpe screened 3 core cable 1294 25 50 mm2 1295 70 120 mm2 1296 150 185 mm2 1297 240 400 mm2 1298 straight through joint for 11 kv ( e ) xlpe screened 3 core cable 1299 25 50 mm2 1300 70 120 mm2 1301 150 185 mm2 1302 240 300 mm2 1303 in door termination kit for 22kv ( e ) xlpe screened 3 core cable 1304 25 50 mm2 1305 70 120 mm2 1306 150 185 mm2 1307 240 400 mm2 1308 out door termination kit for 22kv ( e ) xlpe screened 3 core cable 1309 25 50 mm2 1310 70 120 mm2 1311 150 185 mm2 1312 240 400 mm2 1313 straight through joint for 22 kv ( e ) xlpe screened 3 core cable 1314 25 50 mm2 1315 70 95 mm2 1316 120 150 mm2 1317 185 240 mm2 1318 300 400 mm2 1319 in door termination kit for 33kv ( e ) xlpe screened 3 core cable 1320 25 50 mm2 1321 70 95 mm2 1322 120 185 mm2 1323 240 400 mm2 1324 out door termination kit for 33 kv ( e ) xlpe screened 3 core cable 1325 25 50 mm2 1326 70 95 mm2 1327 120 185 mm2 1328 240 400 mm2 1329 straight through joint for 33 kv ( e ) xlpe screened 3 core cable 1330 35 70 mm2 1331 95 150 mm2 1332 185 300 mm2 1333 400 mm2...

Drinking Water And Sanitation Department - Jharkhand

32174943 procurement of rate of materials 1 m079 polythene water storage tank of isi mark ( e.g sintex / sinter / himgiri / gangotietc ) with cover and locking system 2 m129hdpe pipes 75mm dia 3 m130hdpe pipes 90mm dia 4 m193gi pipe 50 mm dia ( tata or equivalent make ) 5 m337jute 6 m922g.m. ferrules 7 ( i ) 8 mm dia wt. not less than 400 gms 8 ( ii ) 10 mm dia wt. not less than 400 gms 9 ( iii ) 15 mm dia wt. not less than 400 gms 10 ( iv ) 20 mm dia wt. not less than 600 gms 11 ( v ) 25 mm dia wt. not less than 900 gms 12 m923stop cocks 13 ( i ) 15 mm brass stop cock wt. not less than 300 gms 14 ( ii ) 20 mm brass stop cock wt. not less than 400 gms 15 ( iii ) 25 mm brass stop cock wt. not less than 575 gms 16 ( iv ) 32 mm brass stop cock wt. not less than 850 gms 17 ( v ) 40 mm brass stop cock wt. not less than 1.15 kg 18 ( vi ) 50 mm brass stop cock wt. not less than 2.15 kg 19 ( vii ) 15 mm dia c.i. body brass working part stop cock. 20 ( viii ) 20 mm dia c.i. body brass working part stop cock. 21 ( ix ) 25 mm dia c.i. body brass working part stop cock. 22 m924g.m. full way valve 23 ( i ) 15 mm dia wt. not less than 300 gms without wheel 24 ( ii ) 20 mm dia wt. not less than 400 gms without wheel 25 ( iii ) 25 mm dia wt. not less than 500 gms without wheel 26 ( iv ) 32 mm dia wt. not less than 700 gms without wheel 27 ( v ) 40 mm dia wt. not less than 1.0 kg without wheel 28 ( vi ) 50 mm dia wt. not less than 1.4 kg without wheel 29 ( vii ) 65 mm dia wt. not less than 1.8 kg without wheel 30 ( viii ) 80 mm dia wt. not less than 2.5 kg without wheel 31 m925g.m. non return valve vertical 32 ( i ) 15 mm dia wt. not less than 150 gms 33 ( ii ) 20 mm dia wt. not less than 250 gms 34 ( iii ) 25 mm dia wt. not less than 375 gms 35 ( iv ) 32 mm dia wt. not less than 600 gms 36 ( v ) 40 mm dia wt. not less than 700 gms 37 ( vi ) 50 mm dia wt. not less than 1.0 kg 38 ( vii ) 65 mm dia wt. not less than 1.20 kg 39 ( viii ) 80 mm dia wt. not less than 1.50 kg 40 ( ix ) 100 mm dia wt. not less than 1.80 kg 41 m926g.m. non return valve horizontal 42 ( i ) 15 mm dia wt. not less than 150 gms 43 ( ii ) 20 mm dia wt. not less than 250 gms 44 ( iii ) 25 mm dia wt. not less than 375 gms 45 ( iv ) 32 mm dia wt. not less than 600 gms 46 ( v ) 40 mm dia wt. not less than 700 gms 47 ( vi ) 50 mm dia wt. not less than 1.0 kg 48 ( vii ) 65 mm dia wt. not less than 1.20 kg 49 ( viii ) 80 mm dia wt. not less than 1.50 kg 50 ( ix ) 100 mm dia wt. not less than 1.80 kg 51 m927 cocks 52 ( i ) 15 mm dia g.m. bib cock wt. not less than 300 gms 53 ( ii ) 15 mm dia brass bib cock wt. not less than 400 gms 54 ( iii ) 15 mm dia c.i. bib cock wt. not less than 400 gms 55 ( iv ) 15 mm dia c.i. body brass working part spray painted bib cock wt. not less than 400 gms 56 ( v ) 15 mm dia c.i. brass pillar cock cock wt. not less than 400 gms 57 ( vi ) 15 mm c.i. plug cock ordinary 58 ( vii ) 15 mm c.i. push cock ordinary 59 m928chromium plated brass fittings 60 ( i ) c.p. shower rose 100 mm dia 61 ( ii ) c.p. shower rose 125 mm dia 62 ( iii ) p.v.c. shower rose 150 mm dia 63 ( iv ) p.v.c shower rose 125 mm dia 64 m929connection pipe 65 ( i ) 15 mm dia x 30 cm. long lead connection pipe with brass fittings. 66 ( ii ) 15 mm dia x 45 cm. long lead connection pipe with brass fittings. 67 ( iii ) 15 mm dia x 30 cm. long pvc connection pipe with brass fittings. 68 ( iv ) 15 mm dia x 45 cm. long pvc connection pipe withbrass fittings. 69 m930g.i. fittings ( conforming to i.s. 1879 ) isi marked 70 [ a ] g.i. bend 71 ( i ) 15 mm 72 ( ii ) 20 mm 73 ( iii ) 25 mm 74 ( iv ) 32 mm 75 ( v ) 40 mm 76 ( vi ) 50 mm 77 ( vii ) 65 mm 78 ( viii ) 80 mm 79 ( ix ) 100 mm 80 ( x ) 125 mm 81 ( xi ) 150 mm 82 [ b ] elbow of the following sizes 83 ( i ) 15 mm 84 ( ii ) 20 mm 85 ( iii ) 25 mm 86 ( iv ) 32 mm 87 ( v ) 40 mm 88 ( vi ) 50 mm 89 ( vii ) 65 mm 90 ( viii ) 80 mm 91 ( ix ) 100 mm 92 ( x ) 125 mm 93 ( xi ) 150 mm 94 [ c ] tee plain of the following sizes 95 ( i ) 15 mm 96 ( ii ) 20 mm 97 ( iii ) 25 mm 98 ( iv ) 32 mm 99 ( v ) 40 mm 100 ( vi ) 50 mm 101 ( vii ) 65 mm 102 ( viii ) 80 mm 103 ( ix ) 100 mm 104 ( x ) 125 mm 105 ( xi ) 150 mm 106 [ d ] reducing tee plain of the following sizes ( taking larger dimension ) 107 ( i ) 20 mm 108 ( ii ) 25 mm 109 ( iii ) 32 mm 110 ( iv ) 40 mm 111 ( v ) 50 mm 112 ( vi ) 65 mm 113 ( vii ) 80 mm 114 ( viii ) 100 mm 115 ( ix ) 125 mm 116 ( x ) 150 mm 117 [ e ] socket plain of the following size ( taking larger dimension ) 118 ( i ) 15 mm 119 ( ii ) 20 mm 120 ( iii ) 25 mm 121 ( iv ) 32 mm 122 ( v ) 40 mm 123 ( vi ) 50 mm 124 ( vii ) 65 mm 125 ( viii ) 80 mm 126 ( ix ) 100 mm 127 ( x ) 125 mm 128 ( xi ) 150 mm 129 [ f ] reducing socket plain of the following sizes ( taking larger dimension ) 130 ( i ) 20 mm 131 ( ii ) 25 mm 132 ( iii ) 32 mm 133 ( iv ) 40 mm 134 ( v ) 50 mm 135 ( vi ) 65 mm 136 ( vii ) 80 mm 137 ( viii ) 100 mm 138 ( ix ) 125 mm 139 ( x ) 150 mm 140 [ g ] union socket of the following sizes 141 ( i ) 15 mm 142 ( ii ) 20 mm 143 ( iii ) 25 mm 144 ( iv ) 32 mm 145 ( v ) 40 mm 146 ( vi ) 50 mm 147 ( vii ) 65 mm 148 ( viii ) 80 mm 149 ( ix ) 100 mm 150 ( x ) 125 mm 151 ( xi ) 150 mm 152 [ h ] plugs of the following sizes 153 ( i ) 15 mm 154 ( ii ) 20 mm 155 ( iii ) 25 mm 156 ( iv ) 32 mm 157 ( v ) 40 mm 158 ( vi ) 50 mm 159 ( vii ) 65 mm 160 ( viii ) 80 mm 161 ( ix ) 100 mm 162 ( x ) 125 mm 163 ( xi ) 150 mm 164 [ i ] jam nuts of the following sizes 165 ( i ) 15 mm 166 ( ii ) 20 mm 167 ( iii ) 25 mm 168 ( iv ) 32 mm 169 ( v ) 40 mm 170 ( vi ) 50 mm 171 ( vii ) 65 mm 172 ( viii ) 80 mm 173 ( ix ) 100 mm 174 ( x ) 125 mm 175 ( xi ) 150 mm 176 [ j ] g.i. nipple of the following sizes 177 ( i ) 15 mm dia x 100 mm long 178 ( ii ) 20 mm dia x 100 mm long 179 ( iii ) 25 mm dia x 100 mm long 180 ( iv ) 32mm dia x 100 mm long 181 ( v ) 40 mm dia x 100 mm long 182 ( vi ) 50 mm dia x 100 mm long 183 ( vii ) 65 mm dia x 100 mm long 184 ( viii ) 80 mm dia x 100 mm long 185 ( ix ) 100 mm dia x 100 mm long 186 [ k ] g.i. pipes midium ( tata mark ) or equivalent as per is 1239 ( part 01 ) / 2004 isi marked / medium quality 187 ( i ) 15 mm dia 188 ( ii ) 20 mm dia 189 ( iii ) 25 mm dia 190 ( iv ) 32 mm dia 191 ( v ) 40 mm dia 192 ( vii ) 65 mm dia 193 m931mirrors 194 ( a ) mirror of 6 mm thick plain glass 600 mm x 450 mm beveled edge mirror includingc.p. brass revolving fittings 3 mm plywood boardand c.p. hinges etc.to fix the mirror 195 ( b ) do 450 mm x 300 mm do 196 m932 ( a ) glass shelf 600 mm x 125 mm with c.p. brass rail 197 ( b ) do 450 mm x 125 mm do 198 m933 ( a ) c.p. brass towel rail 20 mm x 600 mm with bracket all complete 199 ( b ) anodized aluminum 20 mm x 600 mm towel rail complete with brackets 200 m934c.p. brass soap dish medium quality with screw andhinges etc. 201 m935c.p. liquid soap solution holder 202 m936vitreous white glazed indian water closet of hindustan / parry ware / cera / naycer or anyotherequivalent make 203 ( a ) 580 mm long 204 ( b ) 510 mm long 205 ( c ) 450 mm long 206 ( d ) 510 mm long white glazed fiber i.w.c 207 m937pair of vetreous white glazed foot rest of hindustan / parryware / cera / naycer or any other equivalent make 208 m93815 liters capacity pull and let go high level c.i. cistern complete with ball cock and a pair of bracket 209 m939 ( a ) 12.5 liters lowdown c.i. cistern 210 ( b ) 10.0 liters capacity p.v.c. low design cistern 211 m940 ( a ) white glazed vitreous e.w.c with p trap orany other equivalent make 212 ( b ) e.w.c with s trap 400 mm high of hindustan / parry ware / cera / naycear or any other equivalent make 213 ( c ) black / white plastic seat for e.w.c do as above. 214 m941 ( a ) white glazed vitreous earthen were urinal flat back of hindustan / parryware / cera / naycer or any other equivalent make 600 mm x 350 mm size 215 ( b ) do squatting small 450 mm x 350 mm 216 ( c ) do squatting large 600 mm x 350 mm 217 ( d ) white glazed vitreous earthen ware urinal standing corner size 600 mm x 350 mm hindustan / parryware / cera / naycer or any other equivalent make 218 ( e ) partition plate for urinal 25 x 13 size 219 ( f ) 5 liters c.i. automatic cistern with all p.v.c fittings 220 m942white glazed vitreous wash hand basin 550 mm x 400mm size of hindustan / parryware / cera / naycer or any otherequivalent make 221 m943white glazed vitreous earthen ware kitchensinks of hindustan / parryware / cera / nayceror any other equivalent make 222 ( a ) kitchen sink 600 mm x 450 mm x 200 mm ( 24 x 18 x 8 ) 223 ( b ) kitchen sink 600 mm x 450 mm x 250 mm ( 24 x 18 x 10 ) 224 ( c ) lab sink 450 mm x 300 mm x 150 mm ( 18 x 12 x 6 ) 225 ( d ) lab sink 300 mm x 250 mm x 150 mm ( 12 x 10 x 6 ) 226 m944drain board 227 ( a ) 600 mm x 450 mm ( 24 x 18 ) 228 ( b ) 525 mm x 450 mm ( 21 x 18 ) 229 m945h.c.i. pipes 230 ( a ) 50 mm dia single socket 6 0 ( with ear weight 13 kg ) 231 ( b ) 80 mm dia single socket 6 0 ( with ear weight 18 kg ) 232 ( c ) 100 mm dia single socket 6 0 ( with ear weight 23 kg ) 233 ( d ) 150 mm dia single socket 6 0 ( with ear weight 30 kg ) 234 ( e ) 50 mm dia double socket 6 0 ( with ear weight 14 kg ) 235 ( f ) 80 mm dia double socket 6 0 ( with ear weight 19 kg ) 236 ( g ) 100 mm dia double socket 6 0 ( with ear weight 25 kg ) 237 ( h ) 150 mm dia double socket 6 0 ( with ear weight 13 kg ) 238 ( i ) 50 mm dia single socket 3 0 ( with ear weight 7.25 kg ) 239 ( j ) 80 mm dia single socket 3 0 ( with ear weight 10.5 kg ) 240 ( k ) 100 mm dia single socket 3 0 ( with ear weight 13.75 kg ) 241 ( l ) 150 mm dia single socket 3 0 with ear 242 ( m ) 50 mm dia single socket 2 0 ( with ear weight 5.35 kg ) 243 ( n ) 80 mm dia single socket2 0 ( with ear weight 8.00 kg ) 244 ( o ) 100 mm dia single socket 2 0 ( with ear weight 10.10 kg ) 245 ( p ) 150 mm dia single socket 2 0 with ear 246 ( q ) 50 mm dia single socket 1 0 ( with ear weight 3.4 kg ) 247 ( r ) 80 mm dia single socket 1 0 ( with ear weight 5.50 kg ) 248 ( s ) 100 mm dia single socket 1 0 ( with ear weight 7.60 kg ) 249 ( t ) 150 mm dia single socket 250 m946h.c.i. fittings. 251 ( i ) plain bend of following size 252 ( a ) 50 mm dia ( weight without ear and socket 2.75 kg ) 253 ( b ) 80 mm dia ( weight without ear and socket 3.5 kg ) 254 ( c ) 100 mm dia ( weight without ear and socket 4.5 kg ) 255 ( d ) 150 mm dia ( weight without ear and socket 4.5 kg ) 256 ( ii ) bend with door with following size 257 ( a ) 50 mm dia ( wight without ear and socket 2.75 kg ) 258 ( b ) 80 mm dia ( wight without ear and socket 4.00 kg ) 259 ( c ) 100 mm dia do 5.5 kg 260 ( d ) 150 mm dia do 261 ( iii ) single junction with door of followings sizes. 262 ( a ) 50 mm dia ( weight without ear and socket 3.75 kg ) 263 ( b ) 80 mm dia ( weight without ear and socket 6.50 kg ) 264 ( c ) 100 mm dia do 9.50 kg 265 ( d ) 150 mm dia do 266 ( iv ) double junction with door of following sizes. 267 ( a ) 50 mm dia do 4.5 kg 268 ( b ) 80 mm dia do 7.00 kg 269 ( c ) 100 mm dia do 13.00 kg 270 ( d ) 150 mm dia do 271 ( v ) heel rest bend of following sizes 272 ( a ) 50 mm dia 273 ( b ) 80 mm dia 274 ( c ) 100 mm dia 275 ( d ) 150 mm dia 276 ( vi ) cowel of following sizes 277 ( a ) 50 mm dia ( weight without ear and socket 2.25 kg ) 278 ( b ) 80 mm dia ( weight without ear and socket 3.25 kg ) 279 ( c ) 100 mm dia ( weight without ear and socket 3.25 kg ) 280 ( d ) 150 mm dia do 281 ( vii ) 100 mm dia p trap ( wt without ear and socket ) 8.5 kg 282 ( viii ) 100 mm dia p trap ( wt without ear and socket ) 8.8 kg 283 ( ix ) 100 mm x 80 mm floor trap ( weight without ear and socket ) 4.00 kg 284 ( x ) pass over 50 mm x 150 mm for 50 mm projection 285 ( xi ) do 100 mm x 150 mm for 100 mm projection 286 ( xii ) inverted junction single 100 mm x 50 ( weight without ear and socket ) 9.0 kg 287 ( xiii ) inverted junction double 100 mm x 50 mm x 50 mm ( weight without ear and socket ) 12.0 kg 288 ( xiv ) h.c.i. offset 80 mm projection of the following size 289 ( a ) 50 mm dia ( weight without ear and socket ) 2.75 kg 290 ( b ) 80 mm dia do 3.50 kg 291 ( c ) 100 mm dia do 5.00 kg 292 ( d ) 150 mm dia do 293 ( xv ) h.c.i. socket of following sizes 294 ( a ) 50 mm dia ( weight without ear ) 1.50 kg 295 ( b ) 80 mm dia ( weight without ear ) 3.00 kg 296 ( c ) 100 mm dia ( weight without ear ) 4.50 kg 297 ( d ) 150 mm dia ( weight without ear ) do 298 m947c.i. cover with frame for manhole and inspection chamber 299 ( a ) 600 mm x 450 mm size ( wt. 39 kg ) 300 ( b ) 600 mm x 450 mm size ( wt. 25 kg ) 301 ( c ) 500 mm x 450 mm size ( wt. 25 kg ) 302 m948c.i. bracket pair for w.h.b 303 ( a ) 550 mm x 400 mm size ( 22 x 16 ) 304 ( b ) do for 12.5 liter cistern 305 ( c ) do for 600 mm x 450 mm ( 24 x 18 ) sink 306 ( d ) 40 mm x 60 mm ms plate bracket for sink as above 307 m949 ( a ) 32 mm ( 1 1 / 4 ) c.p. brass waste for w.h.b 308 ( b ) 40 mm ( 1 1 / 2 ) c.p. brass waste for w.h.b for sink 309 ( c ) 32 mm ( 1 1 / 4 ) c.p. waste of white metal 310 ( d ) 40 mm ( 1 1 / 2 ) c.p. waste of white metal 311 m950 ( a ) 32 mm ( 1 1 / 4 ) p.v.c. waste pipe 750 mm long ( 26 long ) withbrass union for w h b 312 ( b ) 40 mm ( 1 1 / 2 ) p.v.c. waste pipe 750 mm long ( 26 long ) with brass union for w h b 313 m95132 mm ( 1 1 / 4 ) p.v.c. telescopic flush pipe with brass union for high level cistern 314 m952rubber inserttion 3 mm ( 1 / 8 ) thick 315 m953pig lead 316 m954yarn 317 m955rubber gasket for d.i pipe of good quality 318 ( a ) 80 mm 319 ( b ) 100 mm 320 ( c ) 125 mm 321 ( d ) 150 mm 322 ( e ) 200 mm 323 ( f ) 250 mm 324 ( g ) 300 mm 325 ( h ) 350 mm 326 ( i ) 400 mm 327 ( j ) 450 mm 328 ( k ) 500 mm 329 ( l ) 600 mm 330 ( m ) 700 mm 331 ( n ) 750 mm 332 ( o ) 800 mm 333 ( p ) 900 mm 334 ( q ) 1000 mm 335 ( r ) 1200 mm 336 m956cotton waste 337 m957asbestos suta ( gland packing ) 338 m958solvent cement 339 m959hydrocloric acid ( sepecific gravity 1.20 ) 340 m960cp & pvc fitting 341 ( i ) 32 mm dia c.p. waste 342 ( ii ) 32 mm dia pv c waste pipe 750 mm long with coupling 343 ( iii ) 40 mm dia c.p. waste 344 ( iv 40 mm dia pvc waste pipe 750 mm long with coupling 345 ( v 100 mm dia steel jali 346 ( vi ) 15 mm dia c.p. nipple with coupling ( short pieces ) 347 ( vii ) 50 mm dia pvc pipe with coupling 348 m961special type of c.p. bath room fittings for v.i.p.buildings ( jal, jaquar, marc or equivalent mark ) 349 ( i ) pillar cock ( isi ) 350 ( ii ) pillar cock ( long neck ) 351 ( iii ) bib cock ( isi ) 352 ( iv ) bib cock ( long thread ) 353 ( v ) angular stop cock 354 ( vi ) angular stop cock ( long thread ) 355 ( vii ) concealed stop cock reduce ( isi ) 356 ( viii ) concealed stop cock heavy duty extra adjustable wall flange 357 ( ix ) long body bib cock 358 ( x ) swan neck tap with left hand operating knob 359 ( xi ) central hole basin mixer ( best quality ) 360 ( xii ) wall mixer with telephonic shower arrangement 361 ( xiii ) wall mixer with provision for over head shower with elbow coupling and well flange 362 ( xiv ) wall mixer 3 in 1 system with provision for over head shower with elbow coupling and wall flange 363 ( xv ) sink mixer with swinging casted spout 364 ( xvi ) sink cock with swinging casted spout 365 ( xvii ) 4 way diverter for concealed fittings 366 ( xviii ) pressure adjustable shower with revolving joint 367 ( xix ) telephone shower with flexible pipe 368 ( xx ) flush cock with wall flange ( 25 mm ) 369 ( xxi ) towel rail 24 370 ( xxii ) towel ring 371 ( xxiii ) soap dish 372 ( xxiv ) tumbler holder 373 ( xxv ) toilet paper holder 374 ( xxvi ) glass shelf 22 375 ( xxvii ) corner glass shelf with bracket 376 ( xxviii ) flush valve complete with 32 mm size controlcock & flange 377 m962c.i special & pvc pipes 378 1. c.i double shocketted fittings bend such as bend, tee, taper, 379 ( a ) 80 200 mm 380 ( b ) 250 700 mm 381 ( c ) 700 1000 mm 382 2. c.i double flange fittings such as tee, taper, tailpiece, bend etc 383 ( a ) 80 200 mm 384 ( b ) 250 700 mm 385 ( c ) 700 1000 mm 386 m1024basic rate of upvc pipe 125mm dia conforming to i.s.i. latest revision is 12818 / 2016 cml no. 5543459 387 m1028providing and supplying in standard lengths high density polyethylene pipe ( hdpe pipe ) confirming to is 4984 4984 / 14151 / 12786 / 13488 ( latest revision with necessary jointing materials like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joints excluding coupler / specials and taxes ) . 388 hdpe pipe of materials grade pe80 pn06 ( dia in mm ) 389 25 mm dia 390 32 mm dia 391 40 mm dia 392 50 mm dia 393 63 mm dia 394 75 mm dia 395 90 mm dia 396 110 mm dia 397 125 mm dia 398 140 mm dia 399 160 mm dia 400 180 mm dia 401 200 mm dia 402 225 mm dia 403 250 mm dia 404 280 mm dia 405 315 mm dia 406 355 mm dia 407 400 mm dia 408 450 mm dia 409 500 mm dia 410 hdpe pipe of materials grade pe80 pn10 ( dia in mm ) 411 25 mm dia 412 32 mm dia 413 40 mm dia 414 50 mm dia 415 63 mm dia 416 75 mm dia 417 90 mm dia 418 110 mm dia 419 125 mm dia 420 140 mm dia 421 160 mm dia 422 180 mm dia 423 200 mm dia 424 225 mm dia 425 250 mm dia 426 280 mm dia 427 315 mm dia 428 355 mm dia 429 400 mm dia 430 450 mm dia 431 500 mm dia 432 m1029providing and supplying in standard lengths high density polyethylene pipe ( hdpe pipe ) 25mm to 500mm dia confirming to is 4984 4984 / 14151 / 12786 / 13488 ( latest revision with necessary jointing materials like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joints excluding coupler / specials and taxes. 433 hdpe pipe of materials grade pe100 pn06 ( dia in mm ) 434 25 mm dia 435 32 mm dia 436 40 mm dia 437 50 mm dia 438 63 mm dia 439 75 mm dia 440 90 mm dia 441 110 mm dia 442 125 mm dia 443 140 mm dia 444 160 mm dia 445 180 mm dia 446 200 mm dia 447 225 mm dia 448 250 mm dia 449 280 mm dia 450 315 mm dia 451 355 mm dia 452 400 mm dia 453 450 mm dia 454 500 mm dia 455 hdpe pipe of materials grade pe100 pn10 ( dia in mm ) 456 25 mm dia 457 32 mm dia 458 40 mm dia 459 50 mm dia 460 63 mm dia 461 75 mm dia 462 90 mm dia 463 110 mm dia 464 125 mm dia 465 140 mm dia 466 160 mm dia 467 180 mm dia 468 200 mm dia 469 225 mm dia 470 250 mm dia 471 280 mm dia 472 315 mm dia 473 355 mm dia 474 400 mm dia 475 450 mm dia 476 500 mm dia 477 m1030rcc esr 478 designing ( aesthetically ) , and constructing rcc elevated service reservoirs of following capacity with rcc staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for esr having capacity upto 500 cum and not more than 6m c / c for esr having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the in side and out side face of the container and also plaster with plastic paint in all columns and bracingsincluding refilling disposing off the surplus stuff with in a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as m.s. ladder out side, stainless steel lader in contenor, c.i. manhole frame and covers, water level indicators, lightening conductor, g.i. pipe railing around walk way and top slab, providing stair case from ground level to roof level, m.s. grill gate of 2m height with locking arrangement of approved design, b.b. masonry chambers for all valves, ventilating shafts, providing and applying three coats of acrylie emulsion with silicon edditives paint to the structure incluingroof slab, epoxy painting to internal surface and anti termite treatment for under ground part soft he structure and giving satisfactory water tightness test as per i.s. code. the job to include painting then ame of the scheme and other details on thereservoir as per the directions of engineer in charge. 479 notes 480 the design of the structure be in accordance with relevant i.s. specification ( i.s. 3370 1965 or revised. ) 481 the design shall satisfy the stipulations as per i.s. 1893 1984 and i.s.13920 / 1993 for seismic force and i.s. 11682 / 1985 for r.c.c. staging of over head tanks. 482 for design having more than 6 columns, suitable bracing is obligatory. 483 plain round mild steel bars grade i conforming to i.s.432 part i orhigh yield strength deformed bars conforming to i.s. 1786 or i.s. 1139 shall beused, grade i imildsteel bars will not be allowed 484 irrespective of the type of foundation proposed in the design, one set of bracing be provided at the ground level. 485 these rates include providing m.s. ladder for e.s.r.s upto 2 lakh litres capacity and providing spiral stair case for e.s.r. above 2 lakh litres capacity. 486 staging shall have to bede signed with stresses of m 200 concrete for esr. however all rcc construction should be donein m 250. structures in contact with water shall be designed & casted in m 300 487 these rates are including the cost of up lift pressure if any and entire dewatering during execution. incase of water logging are a where water is struck at shallow depth, extra provision of dewatering shall be made as per site condition. 488 all conditions given in the member secretarys circular no. mjp / ts i / 350 / 1668 dt. 2 8 97 and mjp / s i / 350 / 2127 dt. 13 7 99 shall be strictly followed and additional cost, if any, due to these conditions is included in the rates mentioned below. 489 75 % part rate shall be payable for reinforcement concrete and plastering items of containers of e.s.r. till satisfactory hydraulic testing for water tightness is given; and till that work shall be treated as incomplete. 490 the rates indicated in the table are excluding the cost of pipes, specials and valves required for inlet, outlet, washout, overflow and bypass arrangement. the scope of work, however, includes cost of erecting, laying and jointing of pipe and valves including cost of jointing materials upto 5 m beyond outer face of outer most column ( cost of pipe, specials and valves is taken as 10% of the cost of esr as per table ) . 491 for esr upto 500 cum capacity c.i. double flanged pipes upto 300 mm dia shall be provided and c.i. specials shall be used. for esr above 500 cum capacity c.i. / m.s. pipe assembly with minimum 8 mm thickness upto 500 mm dia and minimum 10 mm thickness above 500 mm dia can be used with proper anti corrosive epoxy treatment from in side and out side. 492 below mentioned rates are for foundation swith individual footing with bearing capacity of 20 tonnes per square metre. for raft foundations, these rates shall be increased by 7.5% where safe bearing capacity ( sbc ) is 5 mt per sqm and by 5 % where sbc is more than 5mt / sqm and upto 10 mt / sqm. this % of5 % or 7. 5 % is applicable for estimation of amount of lumpsum item of esr. for extra item due to change from individual foundation to raft, actual increase in concrete and steel be paid as per relevant dsr item. 493 the rate shall be increased by 30 % for bearing piles upto depth of 10 m and for further increased in depth by 5 m each, it shall be increased by another 10%. these rates are applicable where raft is not feasible. for pile foundations sulphate resistant cement shall only beused. single pile for the column is not permitted, group of piles shall be designed with pile cap for each column of esr. 494 the rates are applicable for staging height of 12 m. these rates shall be increased or decreased for per metre variation in this staging height as below : 495 12 to 16 m staging 2% per metre 496 16 to 20 m staging 3% per metre 497 20 m and above 4% per metre 498 for 17 m staging height, percentage calculation will be like below : 499 12 to 16 m 4 x 2 = 8% 500 16 & 17 m 1 x 3% = 3% total = 11% 501 for 21 m staging height, percentage calculation will be like below : 502 12 to 16 m 4 x 2 = 8% 503 16 to 20 m 4 x 3% = 12% 504 20& 21 m 1 x 4% = 4% total = 24% 505 following rates are for seismic zone iii. for zone iv, these rates shall be increased by 5% and for zone ii, these rates shall be decreased by 5%. concerned executive engineer shall confirm the seismic zone for the scheme from seismic zone splan before estimation and adopt appropriate rates as per actual seismic zones. ( seismic maps attached in this csr ) . 506 notes 507 conditions from sr.no.1 to 10 shall form a part and parcel of the tender and must be included in the draft tender papers for works of r.c.c. e.s.r. 508 conditions from sr.no.11 to 16 are for estimation purpose only and shall not appear in the tender. 509 rates for rcc esrs 510 upto 25, 000 litres 511 cost of 25, 000 litres capacity 512 add for capacity above 25, 000 upto 50, 000 litres 513 cost of 50, 000 litres capacity 514 add for capacity above 50, 000 upto 75, 000 litres 515 cost of 75, 000 litres capacity 516 add for capacity above 75, 000 upto 1, 00, 000 litres 517 cost of 1, 00, 000 litres capacity 518 add for capacity above 1, 00, 000 upto 1, 50, 000 litres 519 cost of 1, 50, 000 litres capacity 520 add for capacity above 1, 50, 000 upto 2, 00, 000 litres 521 cost of 2, 00, 000 litres capacity 522 add for capacity above 2, 00, 000 upto 2, 50, 000 litres 523 cost of 2, 50, 000 litres capacity 524 add for capacity above 2, 50, 000 upto 3, 00, 000 litres 525 cost of 3, 00, 000 litres capacity 526 add for capacity above 3, 00, 000 upto 4, 00, 000 litres 527 cost of 4, 00, 000 litres capacity 528 add for capacity above 4, 00, 000 upto 5, 00, 000 litres 529 cost of 5, 00, 000 litres capacity 530 add for capacity above 5, 00, 000 upto 7, 50, 000 litres 531 cost of 7, 50, 000 litres capacity 532 add for capacity above 7, 50, 000 upto 10, 00, 000 litres 533 cost of 10, 00, 000 litres capacity 534 add for capacity above 10, 00, 000 upto 15, 00, 000 litres 535 cost of 15, 00, 000 litres capacity 536 add for capacity above 15, 00, 000 upto 20, 00, 000 litres 537 cost of 20, 00, 000 litres capacity 538 m1031rcc gsr and sump 539 designing ( aesthetically ) , and constructing rcc ground service reservoirs / rcc sumps in m 300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top rcc roof slab / or dome, 20 mm thick cement plaster with water proofing compound in cm 1:3 proportion. to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 m, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye pass arrangement consisting of c.i. / m.s. d / f. pipes, specials and valves of given diameters, providing and fixing accessories such as m.s. ladder inside and outside, c.i. manhole frame and cover, water top slab, b.b. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per is code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. 540 anti –termite treatment shall be given for under ground portion of the structure. 541 notes 542 the design shall be in accordance with various relevant i.s. specification ( i.s.456 / 2000, i.s.875 1987, i.s.3370 1965 or revised. ) 543 only m.s. bars grade i conforming to i.s. 432 part i or high yield strength deformed bars conforming to i.s. 1786 or i.s.1139 shall be used.grade ii m.s. bars shall not be used. 544 entire structure shall be in m 300 only. 545 the scope of pipe assembly work shall be upto 5 metre beyond out side face of the wall, cost of pipes valves and specials is not included in the rate but labour cost for laying and jointing is included. 546 the g.s.r. / sump above 15 lakh litres capacity shall be in two compartment. 547 the job includes designing the structure for up lift pressure and dewatering if required during entire execution and disposal of surplus excavated stuff within lead of 50 metres as directed by engineer in charge. if up lifts considered in design, then these rates shall be increased by 7.5%. 548 g.s.r. outlets shall be with bell mouth of approved pattern in bottom slab and cost of designing bell mouth is included in the rate. sump well includes cost of suction pit required at bottom. 549 for pipe diameters upto 300mm only cipipes and ci specials shall be used. for pipe diameters above 300mm, m.s. pipes and specials minimum 10mm thick shall be used with proper anti corrosive epoxy treatment from inside and outside. 550 cost of pump house is not included in these rates. 551 above rates are applicable for seismic zones 2, 3 and 4. 552 75% part rate shall be payable for reinforcement, concrete and plastering items of all types of g.s.r. sand sump still satisfactory hydraulic testing for water tightness test is given and till that work shall be treated as incomplete. 553 10% shall be added for sump if over head pump house is proposed. 554 note: conditions from sr.no.1 to 11 shall form a part and parcel of tender and must be included in the draft tender papers for work of r.c.c .gsrs and sumps. 555 rates for rcc gsrs and sumps 556 upto 25, 000 litres 557 cost of 25, 000 litres capacity 558 add for capacity above 25, 000 upto 50, 000 litres 559 cost of 50, 000 litres capacity 560 add for capacity above 50, 000 upto 75, 000 litres 561 cost of 75, 000 litres capacity 562 add for capacity above 75, 000 upto 1, 00, 000 litres 563 cost of 1, 00, 000 litres capacity 564 add for capacity above 1, 00, 000 upto 1, 50, 000 litres 565 cost of 1, 50, 000 litres capacity 566 add for capacity above 1, 50, 000 upto 2, 00, 000 litres 567 cost of 2, 00, 000 litres capacity 568 add for capacity above 2, 00, 000 upto 3, 00, 000 litres 569 cost of 3, 00, 000 litres capacity 570 add for capacity above 3, 00, 000 upto 5, 00, 000 litres 571 cost of 5, 00, 000 litres capacity 572 add for capacity above 5, 00, 000 upto 10, 00, 000 litres 573 cost of 10, 00, 000 litres capacity 574 addforcapacityabove10, 00, 000upto15, 00, 000 litres 575 cost of 15, 00, 000 litres capacity 576 add for capacity above 15, 00, 000 litres 577 note: 10% shall be added over the cost of gsr for sump where over head pump house is proposed. 578 m1032unconventionalwater treatment plant 579 designing ( aesthetically ) , providing and constructinghigh rate unconventionalwatertreatmentplant i.e. simplified water treatment plant consisting of civil works includingcostofprovidingandapplyingepoxypainttoinsidesurfaceofwaterretainingstructuresincontactwithchlorineandprovidinganti termitetreatmenttoentirestructurebelowgroundlevel, ceramic tiles for floring, acrylic emulsion with silicon additives paint from outside stainless steel railing, mechanicalandelectricalcomponentsofvarioussub worksasgivenbelow : includingnecessaryhydraulic testing, structuraltesting and trial for 3 months, etc. completeas directedbyengineer in charge ( turn key job ) works. 580 aeration fountain 581 inlet arrangements 582 mixing channel with ventury flume and flow measuring arrangement 583 inlet channel 584 flocculator conforming to i.s. 7208 1974 ( type c ) with detention period of 30 minutes 585 tube settlers designing, fabricating and constructing tube settlers with square or any other shaped tube like circular, cheveron, hexagonal etc .having proven performance 586 rapid sand gravity filters all valve shall be glandless. 587 filter house 588 chemical house 589 alum tanks 2nos. with mixing, carrying and dosing arrangements with piping. 590 100 kg chlorine cylender for capacity upto 5mld and chlorine tonner for capacity above 5 mld. 591 tcl solution tank with mixing, carrying and dosing arrangement with piping. 592 bypass arrangement 593 external and internal electrification 594 laboratory equipments 595 wash water tanks of capacity equal to12 minutes to wash specified number of filter beds at time at 600 lit / m2 / m under head of 12m at under drain. 596 wash water pumps with 100% standby 597 air blowers capable of delivering 600 lmp per square metre of free air of filter area at 0.4 kg / sqcm at the under drains ( 100 % standby ) .air blowers shall be adopted for wtp having capacity more than 3 mld only. below 3 mld capacity, air blowers shall not be adopted. 598 pure water sump of capacity equal to 1 hourpumping capacity. 599 pure water pump house over the sump / by the side of sump. 600 drainage arrangements 601 alum store 602 sanitary block with necessary water supply and drainage arrangements and internalwbm roads. 603 these rates are applicable for seismic zones 2, 3 and 4. 604 rates given below are inclusive of uplift pressure if any and dewatering during the entire work. 605 all rcc structures shall be constructed in m 250. structures in contact with water shall be in m 300. 606 unconventional treatment plants less than 1 mld capacity shall not be constructed. 607 all the structural steel works / fabrications are to be provided with application of hot dip zinc coating according to specification as per is 4759:1996 ( reafirmed 2006 ) . 608 note: conditions from sr. no. 1 to 28 shall form a part and parcel of the tender and must be included in draft tender papers for the work of unconventional treatment plants. 609 unconventional water treatment plant 610 fixed cost for 1 mld 611 add for capacity above 1 mld upto 2 mld 612 cost of 2 mld treatment plant 613 add for capacity above 2 mld upto 3 mld 614 cost of 3 mld treatment plant 615 m1033conventionalwater treatment plant 616 designing ( aesthetically ) , providingconstructingandcommissioningconventionalwatertreatmentplantconsistingofallcivil, mechanicalandelectricalworks includingcostofprovidingandapplyingepoxypainttoinsidesurfaceofwaterretainingstructuresincontactwithchlorineandprovidingantitermitetreatmenttoentirestructurebelowgroundlevel, mechanicalandelectricalcomponentsofvarioussub worksasgivenbelow, includingnecessaryhydraulic testing, structuraltesting, equipmenttestingandtrialrunfora periodof3 months, etc. completeas directedbyengineer in charge ( turn key job ) . 617 aeration fountain plan are a not less than 0.625 square metre per mld 618 ventury flume with necessary devices, consisting of simple mechanical indicator. ( pedestal type gauge ) 619 flash mixer rapid mixing device, detention time 60 seconds to give velocity gradient 300 to 400 sec 1, vane mixer type conforming to i.s. 7090 of 1985. 620 flocculator – conforming to i.s.7208 1974 ( type c ) with detention period of 30 minutes. 621 clarifier horizontal flow circular tank, detention period 2 5 hours, overflow rate 30 cubic metre per square metre per day ( to be specified ) , weir loading not more than 300 cubic metre per metre per day, with mechanical sludge scraper conforming to i.s. no. 10313 1982. 622 rapid sand filter sand filter house filter designed for filteration rate of 5, 000 litres per square metre per hour, minimum 2 beds for plant upto 10 mld, for larger plants as specified, filters to be located in filter house with roof slab, pipe gallery and platform minimum 5.5 metre in width. 623 filtersand effective size 0.45 to 0.70mm, uniformity coefficient not more than 1.7, nor less than 1.3, depth of water over sand 0.75m, free board 50cm, gravel 0.45m in depth, sand and gravel conforming to i.s. 8491 ( i ) 77, back wash by air wash, stand ard appurtenances ( to be specified ) , rate of flow controller, filter gauge, sand expansion gauge, etc. 624 wash water tank capacity to be specified and suitable to supply water to wash 2 filter units at a time where the units are 4 or more. 625 wash water pumps capacity to fill water tank in 1 hour with 100% standby. 626 air blowers capable of delivering 600 lmp per square metre of free air, of filter area at 0.4kg / sqcm at the under drains ( 100% standby ) . 627 chemical house in two storeys 628 ground floor to accommodate 7 days alum requirement and sundry storage. 629 first floor to accommodate alum and lime tanks.etc. 630 solution tanks minimum 3 tanks ( one for preparation, second for dosing and third as standby ) , each tank capable of giving 8 hours maximum dose without interruption, minimum free board 0.30m, trays for dissolving, level indicator, mechanical agitation devices, solution feed and drain lines, solution feed device ( constant head device, strength of solution upto 10% only ) conforming to i.s. 9222 part i 1979. 631 pure water sump and sump house. 632 capacity of sump – one hour of designed flow. 633 pump house pump house of required size over the sump or by the side. 634 store house suitable for alum storage of three months requirement in monsoon with 10% extra capacity for other sundry articles. 635 vacuum feed type chlorinators make tobe approved by mjp. 636 conforming to i.s. 10533 a part ii 1983 637 rate for withdrawal 638 temperature kg. of chlorine discharge degree c per day ( cylinders ) 639 45 67tonnes 640 10 6.359.50 110 641 15 10.75 16.10130 642 20 14.50 21.24254 643 27&above18.70 28.12315 644 chlorinator equipment and container room to conform to i.s. 10553 part i 1983. 645 100% standby shall be provided. 646 by pass arrangements c.i. or m.s. pipes. 647 disposal of waste from wtp: safe disposal arrangement to near by nala including cost of pipe 648 for wtp of capacity 30 mld and more additional arrangement for backwash water recycle shall be provided, including sump, pupming machinary, rising main etc complete 649 drainage arrangements – rcc pipes up to plot boundary. 650 electrical installation – both internal and external including entire plant area. 651 laboratory equipment –as per requirement ( to be specified during tendering ) . 652 sanitary blocks – carpet area 15 square metre minimum upto 25 mld and 25 square metre above 25 mld. 653 administrative block and internal road to accommodate office room, chlorine room, laboratory room, panel board room, blower room etc. and wbm road to connect all units from main gate of plot. 654 rates given below are inclusive of up lift pressure if any and dewatering during entire work. 655 all pipes condutes channels with20%overloading 656 these rates are applicable for seismic zones 2, 3 and 4. 657 all rcc structures shall be constructed in m 300. 658 note: conditions from sr. no. 1 to 22 shall form a part and parcel of the tender and must be incorporated in draft tender papers of conventional treatment plants ( proposed ) . 659 conventional water treatment plant 660 above3 mld to upto 5 mld 661 cost of 5 mld treatment plant 662 add for capacity above 5mld upto 10 mld 663 cost of 10 mld treatment plant 664 add for capacity above 10 mld upto20 mld 665 cost of 20 mld treatment plant 666 add for capacity above 20 mld upto 50 mld 667 cost of 50 mld treatment plant 668 add for capacityabove 50 mld upto 100 mld 669 cost of 100 mld treatment plant 670 add for capacity above 100 mld 671 m1034gpt / hygpt :drilling by rotary drill machine of size 300mm & 400mm dia with t.c. drill bit for tubewells in all kinds of soil including moorum, hard soil, soil mixed with pebbles, shingles, compacted soil, clay, soft and decomposed rock etc, up to 60 meters depth including reaming to facilitate smooth lowering of casing pipe etc. as per specification and direction of e / i ( basic rates ) 672 300 mm dia for gpt 673 400 mm dia for hygpt 674 m1035hydt :cost of drilling 200 mm x 165 mm x 125 meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic dth rig machine, all complete including supplying all materials, tools, drilling rig, air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicles up to the site ( basic rates ) 675 from 0 50 meter 676 from 51 125 meter 677 m1036ms pipe 678 supplying all tools, tackles & lowering of 200 mm dia ms erw casing pipe of 6mm wall thickness including welding charges, cost of pipe etc . all complete job ( basic rates ) 679 supplying all materia;ls, labours, tools & equipments for fitting & fixing 200mm dia ms cap over casing pipe complete job ( basic rates ) 680 m1037dt :basic rates for 125 / 115 mm dia drilled tube well for drilling in all kinds of soil and rock for installation of hand pump with dth rig machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125 / 115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and dirrection of engineer incharge ( basic rates ) 681 drillig upto 30 mtr depth below g. l. in rural area 682 drilling beyond 31 mtr upto 60 mtr below g. l. in rural area 683 m1038trenchless 684 installation of product pipe by manual pipe jacking method including making of entry and exit pits all related civil works like excavation , shoring / strutting etc manual shielded excation , lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 685 from 900 mm to 1000 mm dia 686 in soft soil 687 in hard soil 688 in sandy soil 689 in stone soil 690 from 1000 mm to 1200 mm dia 691 in soft soil 692 in hard soil 693 in sandy soil 694 in stone soil 695 above 1200 mm to 1500 mm dia 696 in soft soil 697 in hard soil 698 in sandy soil 699 in stone soil 700 installation of product pipe by auger boring methodincluding making of entry and exit pits all related civil works like excavation , shoring / strutting etc shielded excavation , through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 701 upto 300 mm dia 702 in soft soil 703 in hard soil 704 in sandy soil 705 in stone soil 706 above300 mm to 450 mm dia 707 in soft soil 708 in hard soil 709 in sandy soil 710 in stone soil 711 above 450 mm to 600 mm dia 712 in soft soil 713 in hard soil 714 in sandy soil 715 in stone soil 716 above 600 mm to 900 mm dia 717 in soft soil 718 in hard soil 719 in sandy soil 720 in stone soil 721 installation of product pipe by guided auger boring methodincluding making of entry and exit pits all related civil works like excavation , shoring / strutting etc shielded excavation , through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 722 upto 300 mm dia 723 in soft soil 724 in hard soil 725 in sandy soil 726 in stone soil 727 above300 mm to 450 mm dia 728 in soft soil 729 in hard soil 730 in sandy soil 731 in stone soil 732 above 450 mm to 600 mm dia 733 in soft soil 734 in hard soil 735 in sandy soil 736 in stone soil 737 above 600 mm to 900 mm dia 738 in soft soil 739 in hard soil 740 in sandy soil 741 in stone soil 742 m1039providing and supplying isi mark ci / d / f reflux valves ( non return valves ) of following dia inspection charges unloading from railway wagon , loading into truck transportation upto department stores / site unloading stacking etc. complete reflux valve as per is 5312 part i ( 1984 ) 743 without byepass arrangement pn 1 744 50 mm 745 65 mm 746 80 mm 747 100 mm 748 125 mm 749 150 mm 750 200 mm 751 250 mm 752 300 mm 753 350 mm 754 400 mm 755 450 mm 756 500 mm 757 600 mm 758 700 mm 759 750 mm 760 800 mm 761 900 mm 762 1000 mm 763 1100 mm 764 1200 mm 765 with byepass arrangement pn 1 766 50 mm 767 65 mm 768 80 mm 769 100 mm 770 125 mm 771 150 mm 772 200 mm 773 250 mm 774 300 mm 775 350 mm 776 400 mm 777 450 mm 778 500 mm 779 600 mm 780 700 mm 781 750 mm 782 800 mm 783 900 mm 784 1000 mm 785 1100 mm 786 1200 mm 787 without byepass arrangement pn 1.6 788 50 mm 789 65 mm 790 80 mm 791 100 mm 792 125 mm 793 150 mm 794 200 mm 795 250 mm 796 300 mm 797 350 mm 798 400 mm 799 450 mm 800 500 mm 801 600 mm 802 with byepass arrangement pn 1.6 803 50 mm 804 65 mm 805 80 mm 806 100 mm 807 125 mm 808 150 mm 809 200 mm 810 250 mm 811 300 mm 812 350 mm 813 400 mm 814 450 mm 815 500 mm 816 600 mm 817 providing double flange sluice valve ( size 50 mm to 1200 mm ) confirming for is 2906 / 14846 including worn gear arrangements as per test pressure stailess steel spindle , caps transportation etc. all complete . 818 with byepass arrangement pn 1 819 50 mm 820 65 mm 821 80 mm 822 100 mm 823 125 mm 824 150 mm 825 200 mm 826 250 mm 827 300 mm 828 350 mm 829 400 mm 830 450 mm 831 500 mm 832 600 mm 833 700mm 834 750 mm 835 800 mm 836 900 mm 837 1000 mm 838 1100 mm 839 1200mm 840 without byepass arrangement pn 1 841 50 mm 842 65 mm 843 80 mm 844 100 mm 845 125 mm 846 150 mm 847 200 mm 848 250 mm 849 300 mm 850 350 mm 851 400 mm 852 450 mm 853 500 mm 854 600 mm 855 700mm 856 750 mm 857 800 mm 858 900 mm 859 1000 mm 860 1100 mm 861 1200mm 862 providing double flange sluice valve confirming for is 2906 / 14846 including worn gearas per test pressure stailess steel spindle , caps transportation etc. all complete for rateincluding all taxes . . 863 without byepass arrangement pn 1.6 864 50 mm 865 65 mm 866 80 mm 867 100 mm 868 125 mm 869 150 mm 870 200 mm 871 250 mm 872 300 mm 873 350 mm 874 400 mm 875 450 mm 876 500 mm 877 600 mm 878 700mm 879 750 mm 880 800 mm 881 900 mm 882 1000 mm 883 1100 mm 884 1200mm 885 with byepass arrangement pn 1.6 886 50 mm 887 65 mm 888 80 mm 889 100 mm 890 125 mm 891 150 mm 892 200 mm 893 250 mm 894 300 mm 895 350 mm 896 400 mm 897 450 mm 898 500 mm 899 600 mm 900 m1040design and supply of v wire screen laterals suitable for infiltration galleryas per site condition and detail provided end connection suitable flange excluding taxes and transportation . 901 dia 06 inch ( 150 mm ) 902 id 153 mm od 167 mm 903 screen thickness 07 mm 904 slot 1.00 mm 905 moc lowcarbon galvenised steel 906 length 5 mtr. 907 dia 08 inch ( 200 mm ) 908 id 205 mm od 221mm 909 screen thickness 08 mm 910 slot 1.00 mm 911 moc lowcarbon galvenised steel 912 length 5 mtr. 913 dia 10 inch ( 250 mm ) 914 id 256 mm od 276mm 915 screen thickness 10 mm 916 slot 1.00 mm 917 moc lowcarbon galvenised steel 918 length 5 mtr. 919 dia 12 inch ( 300 mm ) 920 id 306 mm od 326 mm 921 screen thickness 10 mm 922 slot 1.00 mm 923 moc lowcarbon galvenised steel 924 length 5 mtr. 925 dia 14 inch ( 350 mm ) 926 id 338 mm od 363 mm 927 screen thickness 12.5 mm 928 slot 1.00 mm 929 moc lowcarbon galvenised steel 930 length 5 mtr. 931 m1041supplying all materials, labours, equipments for lowering 125mm dia blue upvc casing pipe as casing for protecting the sides from falling during the process of drilling all complete including carriage of materials to work site ( basic rate ) . 932 m1042supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per dirction e / i ( basic rate ) . 933 m1043supplying labour cement and calcium chloride or bentonite solution and equipments for grouting the casing pipe after lowering in the bore including carriage of materials to work site etc. all complete as per specification & direction of e / i ( basic rate ) . 934 m1044supplying labour and equipments including 125mm dia g.i. cap and fitting and fixing over the casing pipe of tube well properly and taking it out as per direction e / i ( the cap will be the property of department ) ( basic rate ) . 935 m1045supplying all materials, labours, equipments for constructing p.c.c. ( 1:2:4 ) circular platform around drilled tube well including 12mm thick cement plaster ( 1:4 ) with neat cement punning over exposed surface as per unicef design, etc. all complete including carriage of materials ( basic rate ) . 936 m1046supplying all materials, labours and equipments for constructing p.c.c. ( 1:2:4 ) drain as per unicef design etc. all complete including carriage of materials ( basic rate ) . 937 m1047supplying extra deep well hand pump complete sets with cylinder assembly & connecting rod ( 12 pcs ) as per is : 15500 part 2 / 2004 ( basic rate ) . 938 m1048supply of 200mm dia x 3.00m long upvc casing pipe conferming to is : 12818: 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . 939 m1049supply of 200mm dia ribbed screen pipe conferming tois : 12818: 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . 940 m1050supply of 125mm dia ribbed screen pipe conferming tois : 12818: 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . 941 m1051supplying all tools, equipments and labour and lowering 32 mm dia medium quality g.i. pipe in drilled tube well in 3 mtrs. length all complete as per dirction e / i including carriage of materials ( basic rate ) . 942 m1052supplying all tools, labour for fitting and fixing deep well cylinder with necessary connecting rod complete job as per specification & direction of e / i including carriage of materials ( basic rate ) . 943 m1053supplying all materials, labours and fixing india mark ii hand pump with all accessories all complete job as per direction of e / i including carriage of materials ( basic rate ) . 944 m1054design, supply, installation testing & commissioning of packaged water treatment plants ( unconventional type ) of different capacity with ( 20 hours operation ) comprising of lamella clarifier, static mixture flocculation tank ( smet ) , multi grade filter ( mgf ) with best quality filter media, lime / coagulant / polymer dosing system hypo chloride dosing system, raw water feed pump / clear water transfer pump ( either or ) , sludge transfer cum recirculation pump, filter feed pump & back wash pump including all fitting like valve and other special fittings and electrical power supply to the different supplied units with mcb panel internal electrification with lighting arrangement with treatment plant site with provision of chemical storage and water testing boratoryfacility should be from a reputed manufacturer / authorized distribution / authorized dealer conforming to relevant is codes and certified by iso 9001 2008 & 14001, it also include cost of civil foundation, including clarified water tank internal connecting pipe line from raw water inlet to cwr and applying internal epoxy paint on the supply equipment all the prices are exclusive of gst, allied structure / items which are site specific such as external electrification, approach road, foot bridge, cofferdam, compound wall, scada and automation, cwr pumps etc are to be considered extra. 945 0.2 mld 946 0.3 mld 947 0.4 mld 948 0.5 mld 949 0.6 mld 950 m1055pumps 951 supplying100 mm dia submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene / noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single / double run shall be provided with each pump. 952 submersible pump set 100 mm dia ( with polypropylene / noryl impeller ) up to 20 stages 953 1 h.p. 954 1.5hp 955 2 hp 956 2.5 hp 957 3.0 hp 958 4.0 hp 959 5.0 hp 960 supply rate should be increased by rs 200 / per stage for pump with more than 20 stages 961 submersible pump 150 mm dia ( with bronze impeller ) up to 8 stages 962 1.5 hp 963 2.0 hp 964 3.0 hp 965 4.0 hp 966 5.0 hp 967 6.0 hp 968 7.5 hp 969 supply rate should be increased by rs 600 / per stage for pump with more than 8 stages 970 submersible pump 150 mm dia ( with bronze impeller ) up to 12 stages 971 8.0 hp 972 9.0 hp 973 10.0 hp 974 11.0 hp 975 12.5 hp 976 15.0 hp 977 supply rate should be increased by rs 600 / per stage for pump with more than 12 stages 978 submersible pump 150 mm dia ( with bronze impeller ) up to 20 stages 979 17.5 hp 980 20.0 hp 981 25 hp 982 1 ) supply rate should be increased by rs 600 / per stage for pump with more than 20 stages for bore well only. 983 for other use 200 mm dia pump shall be preferred over 150 mm dia with more than 20 stage pump. 984 2 ) for 150 mm dia energy efficient pumps add as below 985 a. up to 8 stages : 3% on supply rate 986 b. up to 12 stages : 4% on supply rate 987 c. up to 15 stages : 5% on supply rate 988 m1056pressure gauge 989 providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint 990 pressure gauge ( 100 mm dia ) 991 pressure gauge ( 150 mm dia ) 992 vacuum / combination gauge 993 supplyingvacuum gauge / combination gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia g.i. pipe. 994 vacuum / combination gauge – 100 mm dia 995 vacuum / combination gauge – 150 mm dia 996 m1057lifting equipment 997 chain pulley block 998 supplyingtriple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark. 999 1 tonne capacity 1000 2 tonne capacity 1001 3 tonne capacity 1002 hand operated circular or rectangular travelling crane ( single girder ) 1003 supplyingsingle girder hand operated circular / rectangular travelling crane with 6 m lift complete with chain pulley block isi marked and travelling trolley both tested for 50% overload including arrangement for longitudinal travel / circular travel and cross travel with wheel, hand chain, etc complete. 1004 3 tonne capacity 1005 up to 5 m span 1006 above 5 m up to 6 m span 1007 above 6 m up to 8 m span 1008 5 tonne capacity 1009 up to 5 m span 1010 above 5 m up to 6 m span 1011 above 6 m up to 8 m span 1012 above 8 m up to 10 m span 1013 electric operated circular or rectangular travelling crane ( single girder ) 1014 supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block. 1015 5 tonne capacity 1016 above 6 m up to 8 m span 1017 above 8 m up to 10 m span 1018 7.5 tonne capacity 1019 above 6 m upto 8 m span 1020 above 8 m up to 10 m span 1021 10 tonne capacity 1022 above 6 m up to 8 m span 1023 above 8 m up to 10 m span 1024 square bar / rail 1025 providing, erecting and fixing square bar of en 8 as rail for over head crane on provided track, girder / continuous corbel beam, including supporting plate and “j” bolts. 1026 50 x 50 mm ( en 8 ) 1027 40 x 40 mm ( en 8 ) 1028 m1058lightening arrester, ab switch, insulators 1029 lightening arrestor 1030 supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line. 1031 suitable for 11 kv supply, distribution class 1032 suitable for 22 kv supply, distribution class 1033 suitable for 33 kv supply, station class 1034 disc insulator 1035 supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm 1036 suitable for 11kv line 1037 suitable for 33kv line 1038 pin insulator 1039 supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm 1040 suitable for 11kv line 1041 suitable for 33kv line 1042 air break switch without earth switch 1043 supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps 1044 suitable for 11kv line 1045 rocking / tilting type 1046 rotating type 1047 suitable for 33kv line 1048 rocking / tilting type 1049 rotating type 1050 air break switch with earth switch 1051 supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps 1052 suitable for 11kv line 1053 rotating type 1054 suitable for 33kv line 1055 rotating type 1056 drop out fuse ( channel mounted ) 1057 supplying, erecting approved make out door type drop out fuse channel type with insulator complete with fuse holders fuse barrel with metal fittings, fuse element, with working currentup to 50 amp, capacity completeerected on provided cross arm, each set comprising 3 units 1058 suitable for 11 kv line 1059 suitable for 33 kv line 1060 horn gap fuse ( channel mounted ) 1061 supplying, erecting approved make out door type horn gap type fuse with insulator, fuse element, with working current up to 50 amp, capacity complete erected on provided cross arm, each set comprising 3 units 1062 suitable for 11 kv line 1063 suitable for 33 kv line 1064 m1059transformer 1065 power transformer ( with off load tap changer ) any isi mark 1066 supplyingoutdoor type copper wound transformer continuously rated for 3ph, 50 hz, at full load and temp. rise not exceeding 450 c by thermometer in oil and 500 c by theresistance in winding after continuous run at full load rating, thetransformer should have oil immersed winding having vector group dy11, ht side connected in delta and lt side connected in star with neutral brought out connected to provideseparateearthing. the transformer shall have power terminal arrangement, bushing / cable end box on ht side and cable end box on lt side. 2 nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. the transformer should have following standard fittings. transformer shall be latest manufacturing standards as per amended is specifications and the load & no load losses shall be limited to the values given below or as per is or norms issued by seb which ever are lower 1067 1. oil conservator with filling hole with cap and plain oil level gauge. 1068 2. silica gel dehydrating breather charged with silica gel. 1069 3. oil drain valve 1070 4. oil filter valve 1071 5. lifting eyes / hooks 1072 6. two earthing terminals 1073 7. diagram and rating plate 1074 8. air vent 1075 9. explosion vent 1076 10. 100mm dia thermo meter with thermometer pocket 1077 11. four bi directional plain roller. 1078 power transformer 11000 / 433 volts with off load tap changer – 12.5% to +2.5% in steps of 2.5% as per bis level 2. 1079 63 kva ( no load loss 180w and load loss 1235w ) 1080 100 kva ( no load loss 260w and load loss 1760w ) 1081 160kva ( no load loss 260w and load loss 1760w ) 1082 200kva ( no load loss 500w and load loss3000w ) 1083 250kvaa ( no load loss 550w and load loss3600w ) 1084 315kva ( no load loss 580w and load loss 4200w ) 1085 400 kva ( no load loss 715w and load loss 5000w ) 1086 500 kva ( no load loss 850w and load loss 5800w ) 1087 630 kva ( no load loss 1000w and load loss 7000w ) 1088 750 kva ( no load loss 1500w and load loss 8000w ) 1089 power transformer ( with on load tap changer ) 1090 supplyingoutdoor type copper wound transformer continuously rated for 3ph, 50 hz, at full load and temp. rise not exceeding 450 c by thermometer in oil and 500 c by theresistance in winding after continuous run at full load rating, thetransformer should have oil immersed winding having vector group dy11, ht side connected in delta and lt side connected in star with neutral brought out connected to provideseparateearthing. the transformer shall have power terminal arrangement, bushing / cable end box on ht side and cable end box on lt side. 2nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. the transformer should have following standard fittings. the oltc should be suitable for minimum 50 operations per day. transformer shall be latest manufacturing standards as per amended is specifications and the load & no load losses shall be limited to the values given below or as per is or norms issued by seb which ever are lower 1091 1. oil conservator with filling hole with cap and plain oil level gauge. 1092 2. silica gel dehydrating breather charged with silica gel. 1093 3. oil drain valve 1094 4. oil filter valve 1095 5. lifting eyes / hooks 1096 6. two earthing terminals 1097 7. diagram and rating plate 1098 8. air vent 1099 9. explosion vent 1100 10. 100mm dia thermo meter with thermometer pocket 1101 11. four bi directional plain roller. 1102 12. buchholz relay 1103 13. resistance temp. detector 1104 14. marshalling box 1105 15. automatic voltage regulator ( avr ) 1106 16. remote tap changing controller ( rtcc ) 1107 transformer 11000 / 433 volts withon load tap changer – 15% to +5% in steps of 1.25% with rtcc, avr and marshalling box and other specification as per bis level 2. 1108 750 kva 1109 1000 kva 1110 1250 kva 1111 1600 kva 1112 2000 kva 1113 m1060motors 1114 foot mounted motors tefc 1500 rpm 1115 supplyingfoot mounted tefc 1500 rpm, squirrel cage induction motor, conforming to is 325 having continuous rating suitable for operation at 415 volts + / 10%, 3 phase, 50 hz + / 3% with “f” class insulation temperature rise limited to class “b” insulation. motors conform to is 12615 with efficiency level ie3 and provided with enclosure protection class ip 55. 1116 15 kw ( 20 hp ) 1117 18.5 kw ( 25 hp ) 1118 22 kw ( 30 hp ) 1119 30 kw ( 40 hp ) 1120 37 kw ( 50 hp ) 1121 45 kw ( 60 hp ) 1122 55 kw ( 75 hp ) 1123 75 kw ( 100 hp ) 1124 90 kw ( 120 hp ) 1125 110 kw ( 150 hp ) 1126 132kw ( 180hp ) 1127 160kw ( 215 hp ) 1128 250kw ( 335 hp ) 1129 foot mounted motor tefc 1500 rpm 1130 0.75 kw ( 1hp ) 1131 1.1 kw ( 1.5 hp ) 1132 1.5 kw ( 2 hp ) 1133 2.2 kw ( 3 hp ) 1134 3.7 kw ( 5 hp ) 1135 5.5 kw ( 7.5 hp ) 1136 7.5 kw ( 10 hp ) 1137 9.3 kw ( 12.5 hp ) 1138 11 kw ( 15 hp ) 1139 m1061aluminium cable 1140 cable 1141 aluminium conductor three core, xlpe / pvc insulated & armoured cable . 1142 supplyingxlpe / pvc insulated, armoured cable 1100 v grade with isi mark three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1143 3 core 2.5 sq mm 1144 3 core 4 sq mm 1145 3 core 6 sq mm 1146 3 core 10 sq mm 1147 3 core 16 sq mm 1148 3 core 25 sq mm 1149 3 core 35 sq mm 1150 3 core 50 sq mm 1151 3 core 70 sq mm 1152 3 core 95 sq mm 1153 3 core 120 sq mm 1154 3 core 150 sq mm 1155 3 core 185 sq mm 1156 3 core 240 sq mm 1157 3 core 300 sq mm 1158 3 core 400 sq mm 1159 aluminium conductor 3.5 core, xlpe / pvc insulated & unarmoured cable 1160 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three and half core, stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, completein an approved manner. 1161 3.5 core 25 sq mm 1162 3.5 core 35 sq mm 1163 3.5 core 50 sq mm 1164 3.5 core 70 sq mm 1165 3.5 core 95 sq mm 1166 3.5 core 120 sq mm 1167 3.5 core 150 sq mm 1168 3.5 core 185 sq mm 1169 3.5 core 240 sq mm 1170 3.5 core 300 sq mm 1171 3.5 core 400 sq mm 1172 ht aluminium three core 3.3 kve cable xlpe insulated 1173 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1174 3 core 35 sq mm 1175 3 core 50 sq mm 1176 3 core 70 sq mm 1177 3 core 95 sq mm 1178 3 core 120 sq mm 1179 3 core150sq mm 1180 3 core 185 sq mm 1181 3 core 240sq mm 1182 3 core 300 sq mm 1183 3 core 400 sq mm 1184 ht aluminium three core 6.6 kv ( ue ) / 11kv ecable xlpe insulated 1185 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1186 3 core 35 sq mm 1187 3 core 50 sq mm 1188 3 core 70 sq mm 1189 3 core 95 sq mm 1190 3 core 120 sq mm 1191 3 core150sq mm 1192 3 core 185 sq mm 1193 3 core 240sq mm 1194 3 core 300 sq mm 1195 3 core 400 sq mm 1196 ht aluminium three core 11kv ( ue ) cable xlpe insulated 1197 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1198 3 core 35 sq mm 1199 3 core 50 sq mm 1200 3 core 70 sq mm 1201 3 core 95 sq mm 1202 3 core 120 sq mm 1203 3 core150sq mm 1204 3 core 185 sq mm 1205 3 core 240sq mm 1206 3 core 300 sq mm 1207 3 core 400 sq mm 1208 aluminium conductor three core, xlpe / pvc insulated & unarmoured cable . 1209 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1210 3 core 4 sq mm 1211 3 core 6 sq mm 1212 3 core 10 sq mm 1213 3 core 16 sq mm 1214 3 core 25 sq mm 1215 3 core 35 sq mm 1216 3 core 50 sq mm 1217 3 core 70 sq mm 1218 3 core 95 sq mm 1219 3 core 120 sq mm 1220 3 core 150 sq mm 1221 3 core 185 sq mm 1222 3 core 240 sq mm 1223 3 core 300 sq mm 1224 3 core 400 sq mm 1225 m1062copper cable 1226 cable 1227 3 core pvc insulated, pvc sheathed copper conductor flat submersible cable . 1228 supplying , flat flexible submersible cable with, copper conductor, pvc insulated, and pvc sheathed . 1229 3 core 1.5 sq mm 1230 3 core 2.5 sq mm 1231 3 core 4 sq mm 1232 3 core 6 sq mm 1233 3 core 10 sq mm 1234 3 core 16 sq mm 1235 3 core 25 sq mm 1236 3 core 35 sq mm 1237 copper conductor three core, xlpe / pvc insulated & unarmoured cable . 1238 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1239 3 core 1.5 sq mm 1240 3 core 2.5 sq mm 1241 3 core 4 sq mm 1242 3 core 6 sq mm 1243 3 core 10 sq mm 1244 3 core 16 sq mm 1245 3 core 25 sq mm 1246 3 core 35 sq mm 1247 3 core 50 sq mm 1248 3 core 70 sq mm 1249 3 core 95 sq mm 1250 copper conductor 3.5 core, xlpe / pvc insulated & armoured cable . 1251 supplyingxlpe / pvc insulated, armoured cable 1100 v grade with isi mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, completein an approved manner. 1252 3.5 core 1.5 sq mm 1253 3.5 core 2.5 sq mm 1254 3.5 core 4 sq mm 1255 3.5 core 6 sq mm 1256 3.5 core 10 sq mm 1257 3.5 core 16 sq mm 1258 3.5 core 25 sq mm 1259 3.5 core 35 sq mm 1260 3.5 core 50 sq mm 1261 3 .5 core 70 sq mm 1262 3.5 core 95 sq mm 1263 3.5 core 120 sq mm 1264 3 .5 core150sq mm 1265 3.5 core 185 sq mm 1266 3.5 core 240sq mm 1267 3.5 core 300 sq mm 1268 3.5 core 400 sq mm 1269 copper conductor 3.5 core xlpe / pvcunarmoured 1270 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1271 3.5core 25 sq mm 1272 3.5core 35 sq mm 1273 3.5 core 50 sq mm 1274 3.5 core 70 sq mm 1275 3.5 core 95 sq mm 1276 3.5 core 120 sq mm 1277 3.5 core150sq mm 1278 3.5 core 185 sq mm 1279 3.5 core 240sq mm 1280 3.5 core 300 sq mm 1281 3.5 core 400 sq mm 1282 copper conductor three core, xlpe / pvc insulated & armoured cable . 1283 supplyingxlpe / pvc insulated, armoured cable 1100 v grade with isi mark three core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1284 3 core 1.5 sq mm 1285 3 core 2.5 sq mm 1286 3 core 4 sq mm 1287 3 core 6 sq mm 1288 3 core 10 sq mm 1289 3 core 16 sq mm 1290 3 core 25 sq mm 1291 3 core 35 sq mm 1292 3 core 50 sq mm 1293 3 core 70 sq mm 1294 3 core 95 sq mm 1295 3 core 120 sq mm 1296 3 core 150sq mm 1297 3core 185 sq mm 1298 3 core 240 sq mm 1299 3 core 300 sq mm 1300 3 core 400 sq mm 1301 m1063foot valve 1302 foot valve 1303 supplying c.i. foot valve having single leather flap and gunmetal seating. valve shall be fixed on suction side of pump as per requirement including jointing material and hardware. 1304 flanged type 1305 50 mm 1306 65 mm 1307 80 mm 1308 100 mm 1309 125 mm 1310 150 mm 1311 m1064aircircuit breaker 1312 acbbreaking capacity 50ka thermal magnetic manual draw out type 3 pole 1313 630a 1314 800a 1315 1000a 1316 1250a 1317 1600a 1318 2000a 1319 m1065starter 1320 d.o.l. starter with ss enclosure with 380 / 415 volt coil 1321 7.5 h.p. 1322 10 h.p. 1323 supplyingfully automatic star delta starter to operate induction motor working on415v, 3phase, 50 hz with no volt coil, over load element, on off push buttons, with necessary materials and connected to supply, etc complete starter with original sheet steel encloser 1324 f.a.s.d starter 1325 10.0 h.p. 1326 15 h.p. 1327 20 h.p. 1328 25 h.p. 1329 35 h.p. 1330 40 hp 1331 50 hp 1332 75 h.p. 1333 100 h.p. 1334 125 h.p. 1335 150 h.p. 1336 250 h.p. 1337 m1066servo controlled automatic voltage stabilizer 1338 providing, erecting servo controlled automatic voltage stabiliser suitable for out put voltage of 415 volt + / 1%, 3 ph, 50 hz, with copper wound transformer ( air / oil cooled ) as mentioned below. the stabilizer shall function satisfactorily even if incoming supply is unbalanced between phases within range of 10%. the stabilizer should be constructed in cubical box, with bidirectional wheels for easy handling, necessary monitors and users controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and out put voltage, auto / manual selector switch, raise / low push buttons etc. suitable capacity termination strips and bus bars for incoming and out going cable should be provided. all three phases shall be independently monitored and corrected. following protections and indications shall be incorporated?? over voltage / under voltage?? single phasing?? cut off contactor with electronic output sensing unit 1339 servo controlled automatic voltage stabiliser ( out put 415 + / 1% ) input 150 to 450 volt 1340 20 kva air cooled 1341 25 kva air cooled 1342 30 kva air cooled 1343 40 kva air cooled 1344 50 kva oil cooled 1345 60 kva oil cooled 1346 75 kva oil cooled 1347 100 kva oil cooled 1348 125 kva oil cooled 1349 servo controlled automatic voltage stabiliser ( out put 415 + / 1% ) input 280 to 460 volt 1350 15 kva air cooled 1351 20 kva air cooled 1352 25 kva air cooled 1353 30 kva air cooled 1354 40 kva air cooled 1355 50kva air cooled 1356 60 kva oil cooled 1357 75kva oil cooled 1358 100 kva oil cooled 1359 125 kva oil cooled 1360 150 kva oil cooled 1361 200kva oil cooled 1362 250kva oil cooled 1363 300 kva oil cooled 1364 400 kva oil cooled 1365 m1067termination kit 1366 providing and errecting in door type termination kit, for 3.3kv / 6.6 kv / 11kv / 22kv / 33kv xlpe screened 3 core cable 1367 in door termination kit for 3.3kv ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1368 25 50 mm2 1369 70 120 mm2 1370 150 185 mm2 1371 240 400 mm2 1372 out door termination kit for 3.3 ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1373 25 50 mm2 1374 70 120 mm2 1375 150 185 mm2 1376 240 400 mm2 1377 straight through joint for 3.3kv ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1378 25 50 mm2 1379 70 120 mm2 1380 150 185 mm2 1381 240 300 mm2 1382 in door termination kit for 11kv ( e ) xlpe screened 3 core cable 1383 25 50 mm2 1384 70 120 mm2 1385 150 185 mm2 1386 240 400 mm2 1387 out door termination kit for 11kv ( e ) xlpe screened 3 core cable 1388 25 50 mm2 1389 70 120 mm2 1390 150 185 mm2 1391 240 400 mm2 1392 straight through joint for 11 kv ( e ) xlpe screened 3 core cable 1393 25 50 mm2 1394 70 120 mm2 1395 150 185 mm2 1396 240 300 mm2 1397 in door termination kit for 22kv ( e ) xlpe screened 3 core cable 1398 25 50 mm2 1399 70 120 mm2 1400 150 185 mm2 1401 240 400 mm2 1402 out door termination kit for 22kv ( e ) xlpe screened 3 core cable 1403 25 50 mm2 1404 70 120 mm2 1405 150 185 mm2 1406 240 400 mm2 1407 straight through joint for 22 kv ( e ) xlpe screened 3 core cable 1408 25 50 mm2 1409 70 95 mm2 1410 120 150 mm2 1411 185 240 mm2 1412 300 400 mm2 1413 in door termination kit for 33kv ( e ) xlpe screened 3 core cable 1414 25 50 mm2 1415 70 95 mm2 1416 120 185 mm2 1417 240 400 mm2 1418 out door termination kit for 33 kv ( e ) xlpe screened 3 core cable 1419 25 50 mm2 1420 70 95 mm2 1421 120 185 mm2 1422 240 400 mm2 1423 straight through joint for 33 kv ( e ) xlpe screened 3 core cable 1424 35 70 mm2 1425 95 150 mm2 1426 185 300 mm2 1427 400 mm2...

Eastern Coal Fields Ltd - Jharkhand

32159414 supply of roto pump spares supply of roto pump spares , pump body, ci part no 710 ( code 6100033813 ) , pumping element part no 0601r10 ( code 6100033851 ) , pump housing with shaft brg part no 0602r10 ( code 6100033852 ) , base frame part no 748 ( code 6100035020 ) , barrel part no 711 ( code 6100036130 ) , end cover part no 713 ( code 6100034668 ) , rotor double stage part no 723 ( code 6100034669 ) , coupling rod part no 725 ( code 6100034666 ) , base frame assembly part no 603 ( code ) , coupling rod bush , ts part no 726 ( code 6100033811 ) ...

Building Construction Department - Jharkhand

32068192 public works department ( pwd ) is engaged in framing / revision of schedule of rates public works department ( pwd ) is engaged in framing / revision of schedule of rates m 014 brick 75a m 051 cold twisted bars ( hysd bars ) as per is:1786 2008 average rate m 054 corrosion resistant structural steel m 064 paint m 078 cement primer m 154 primer m 178 structural steel average rate m 182 tiles size 300 x 300 mm and 25 mm thick m 183 timber m 185 water based cement paint m 188 wooden ballies 2 dia for bracing m 189 wooden ballies 8 dia and 9 m long ( 9 m @ rs. 43.00 / m ) m 190 wooden packing m 191 wooden staff for fastening of flag 25 mm dia, 1.0 m long m 196 ( a ) 75b brick ( b ) fly ash lime bricks ( falg ) brick conforming to is 12894 1990 ( 9 x 4.5 x 3 ) 100 a at source ( c ) brick tiles ( 300mm x 150 mmx 50 mm ) ( d ) picket jhama brick ( e ) jhama khoa / metal ( f ) bangla bhattas brick of size 9 3 / 4 x 4 3 / 4 x 2 3 / 4 ( 248 mm x121 mm x 70 mm ) inclusive of royalty but exclusive of gst . ( 1 ) 75 b ( 2 ) jhama bricks note : in areas where bricks manufacture are of less size, the rate may be derived by reducing the rate in item [ 271 ( d ) & ( f ) ] in proportion of the bricks rounding to nearest rs. 5.00 m 198 bricks bats at kiln site m 199 rough dressed stone boulder for masonry works. m 200 seasonel sal wood scantling m 201 sal planks : ( i ) 25 mm to 40 mm ( ii ) 12 mm to 20 mm m 202 teak wood : ( i ) scantling ( ii ) planks 25 mm to 40 mm ( iii ) planks 12 mm to 20 mm m 203 sisum wood ( i ) scantling ( ii ) planks 25 mm to 40 mm ( iii ) planks 12 mm to 20 mm m 204 seasoned gamhar wood scantling ( local ) m 205 local wood ( i ) scantling ( ii ) planks 25 mm to 40 mm ( iii ) planks 12 mm to 20 mm m 206 bamboo ( i ) 75 mm dia 6 m long to 8 m long ( ii ) 100 mm dia 6 m long to 8 m long ( iii ) 50 mm dia hill bamboo m 207 sal ballah post ( i ) 100 mm dia ( ii ) 125 mm dia ( iii ) 150 mm dia m 208 butt hinges as per clause 562 of building specification of building construction deptt. of size. ( i ) 75 mm ( ii ) 100 mm m 209 ( i ) teak ply 4 mm thick ( ii ) teak ply 6 mm thick m 210 ply wood ( national or equivalant make ) ( i ) 25 mm thick ( ii ) 19 mm thick ( iii ) 12 mm thick ( iv ) 6 mm thick m 211 orinary commercial ply ( i ) 3 mm thick ( ii ) 4 mm thick ( iii ) 6 mm thick m 212 ( i ) sun mica best quality ( ii ) formica ( 1 mm ) m 215 barbed wire of 4 point, 2 ply 12 swg, 150 mm apart m 217 welded mesh ( 8 to 10 swg ) 100 to 125 mm square size m 218 c.a. sheet ( i ) corrugated 6 mm thick 1.5 m to 3.05 m long. ( ii ) ( a ) plain 6 mm thick 2.4 m to 3.05 m long ( b ) plain 4 mm do ( iii ) c.a. ridge, valley 1 m long ( plain wing adjustable ) ( iv ) corrugated adjustable ridge m 219 l drop 16 mm dia 300 mm long ( as per 5.6.5 of building specification of bcd ) with screw and all fittings. ( i ) aluminum ( ii ) iron ( copper oxidized ) m 220 d handle iron, proper oxidized as per clause 5.6.7 of building specification of b.c.d. ( i ) 150 mm long ( ii ) 125 mm long ( iii ) 100 mm long m 221 d handle made of 16 mm wide and 6 mm thick aluminum flat. ( i ) 150 mm long and 10 mm dia ( ii ) 100 mm long and 10 mm dia m 222 aluminum pipe of 18 gauge ( i ) 12 mm dia ( ii ) 16 mm dia ( iii ) 20 mm dia m 223 iron nails ( i ) 125 mm and below ( ii ) above 125 mm ( iii ) glass clip of wire m 224 mild steel copper oxidized tower bolt as per clause 5.6.6 of building specification of b.c.d 10 mm dia, complete set. ( i ) 100 mm long ( ii ) 150 mm long ( iii ) 200 mm long ( iv ) 225 mm long ( v ) 300 mm long ( vi ) 450 mm long ( vii ) 600 mm long m 225 aluminum tower bolt as per clause 5.6.6 of buillding specification of b.c.d. top quality, 10 mm dia ( i ) 100 mm long ( ii ) 120 mm long ( iii ) 150 mm long ( iv ) 200 mm long ( v ) 225 mm long ( vi ) 300 mm long m 226 screw ( n.f ) ( i ) 75 mm size ( ii ) 60 mm size ( iii ) 50 mm size ( iv ) 40 mm size to 30 mm size ( v ) below 30 mm to 12 mm size m 227 varnish standard make m 228 sprit m 229 ( i ) primer for wood work ( ii ) primer for steel work m 230 shaliltex board ( for use as per expansion joint i.s. 1838 1938 filter ) ( i ) 25 mm thick ( ii ) 18 mm thick ( iii ) 12 mm thick m 231 shalitex primer m 232 double boiled llinseed oil m 233 ( a ) aluminum paint standard make ( b ) synthetic enamel ( isi mark ) m 235 plastic emulsion paint m 236 dry distemper m 237 oil bound distemper m 238 snowcem powder m 239 ( i ) cicko powder / inpermo waterproofing comp ) ( ii ) cicko liquid m 240 robin blue m 241 color for wash m 242 whitening m 243 putty m 244 blackening powder m 245 ( i ) 1st quality paint of different shades ( ii ) 2nd quality paint m 246 wax polish ( 1 lit = 0.50 kg ) m 247 french polish standard make m 249 cotton m 250 ram raj m 251 shellex m 252 narial coir string m 253 narial rope 20 mm to 25 mm dia. m 254 sutli m 255 sabey string m 256 cotton string m 257 raniganj tiles m 258 ridge for above m 259 naria tiles 225 mm to 250 mm m 260 ridge for above or mungra m 261 narial rope above 25 mm dia m 262 thatching grass in bundle ( consisting of small & average length of grass 2.75 m ) bundle m 263 oxalic acid ( 1 lit. = 1 kg ) m 264 iron clamp ( 460 mm x 40 mm x 6 mm ) m 265 rolling shutter 1.02 mm thick m 266 shalimar tarphelt bh ( type ii group 1 ) m 267 ( a ) sun glass ( modi ) ( b ) plane glass panes ( i ) 2 mm thick ( ii ) 3 mm thick ( iii ) 4 mm thick ( iv ) 6 mm thick ( c ) pin hammered glass ( i ) 3 mm thick ( ii ) 4 mm thick ( iii ) 5 mm thick ( d ) 20 mm wide 4 mm thick glass strip for flooring m 268 hessian cloth ( 0.3 kg / m2 cot. ) m 269 gunny best quality m 270 limpet washer m 271 bitumen washer m 272 plaster of peris m 273 g.i. hook 150 mm to 10 mm dia m 274 ( i ) 25 mm x 6 mm nuts & bolts ( ii ) 16 mm x 3.75 mm nuts & bolts ( iii ) 10 mm x 3.75 mm nuts & bolts m 275 ( i ) fly proof wire netting ( 18 gauge wire with 12 16 nos, mesh per m2 ) ( ii ) fly proof wire netting ( light gauge ) m 276 turpentine oil m 277 manson polish m 278 carborandum stones ( 4, 6, 8 & 10 nos ) m 279 lime rubbish m 280 slack coal grade c ( steam ) long flame m 281 flush door ( hot pressed adhesive conforming to 2202 part 1 ) i.s. ( i ) 25 mm thick ( a ) both side commercial ( b ) one side teak ( c ) both side teak ( ii ) 32 mm thick ( a ) both side commercial ( b ) one side teak ( c ) both side teak ( iii ) 38 mm thick ( a ) both side commercial ( b ) one side teak ( c ) both side teak m 282 ( a ) looking eye piece best quality m 283 fevicol / ktcat / vamicol m 284 boat spike ( 300 400 mm long ) m 285 kotah stone tiles ( 15 mm 23 mm ) thick ( i ) 300 mm x 300 mm ( ii ) 375 mm x 375 mm ( iii ) 450 mm x 450 mm m 286 white makrana marble stone 20 mm thick ( i ) 300 mm x 300 mm and below ( ii ) 300 mm x 600 mm and above m 287 white glazed tiles 6 mm thick ( 150 x 150 mm size ) m 288 commercial grade colour ceramic wall / floor tiles ( as per is 13712 ) ( i ) 150 mm x 150 mm ( ii ) 300 mm x 300mm ( iii ) 300 mm x 450mm ( iv ) 300mm x 600mm m 289 dholpur tiles 15 mm x 23 mm thick ( i ) 275 mm x 275 mm to 300 mm x 600 mm ( ii ) 300 mm x 900 mm ( iii ) 600 mm x 1200 mm m 290 mosaic / tarrazo tiles 20 mm thick in ordinary cement base. m 291 mosaic / tarrazo tiles 20 mm thick in white cement base. m 292 slacked stone lime m 293 unslacked stone lime m 294 colour pigment for cement : ( i ) red ( ii ) black ( iii ) green ( iv ) blue m 295 marble dust ( daltonganj ) m 296 marble chips ( i ) dehradoon ( ii ) daltanganj m 297 marble chips coloured daltonganj m 298 commercial particle board interior ( i ) 12 mm ( 600 mm x 600 mm ) size ( ii ) 25 mm ( 600 mm x 600 mm ) size m 299 particle board exterior ( 600 mm x 600 mm size ) ( i ) 12 mm ( ii ) 25 mm m 302 ( a ) 100 mm dia c.a. pipe ( b ) 100 mm dia c. bend m 384 paint ( synthetic enamel ) m 1074 vitrified floor tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 15622 of approved make in all colours and shades.parking tiles ( industrial tiles ) m 1075 vitrified tiles tread of stairs of size 1200x300x15mm thick with water absorption less then 0.08% and conforming to is 15622of approved make in all colours and shades.size of tile 1200x300 mm for tread of stairs. m 1076 double charged vitrified floor tiles of size 600x600mm thick with water absorption less then 0.08% and conforming to is 15622 / iso 13006 of approved make in all colours and shades. m 1077 vitrified cool roof tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 154557 2007 / 1501 3006 of approved make in all colours and shades. m 1078 vitrified floor tiles of size 800x800mm with water absorption less then 0.08% and conforming to is 154557 2007 / 1501 3006 of approved make in all colours and shades. m 1079 vitrified floor tiles of size 1000x1000mm with water absorption less then 0.08% and conforming to is 154557 2007 / 1501 3006 of approved make in all colours and shades. m 1080 polysulphide ( poring grade ) ;density =1.65 gm / cc m 1081 polymer modified cementation coating m 1082 fibre glass cloth m 1083 chequered tiles cement concrete base 300x300x25mm m 1084 chequered tiles cement concrete base 300x300x40mm m 1085 brass screws 30 mm m 1086 plastic sleeves for screw m 1087 chromium plated brass screws 40 mm m 1088 chromium plated brass screws 30 mm m 1089 chromium plated brass screws 25 mm m 1090 chromium plated brass screws 20 mm m 1091 bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm m 1092 bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm m 1093 nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide m 1094 bright finished or black enameled mild steel screws 40 mm m 1095 bright finished or black enameled mild steel screws 25 mm m 1096 bright finished or black enameled mild steel screws 20 mm m 1097 bright finished or black enameled mild steel bolts and nuts 50x6 mm m 1098 oxidised mild steel butt hinges 125x65x2.12 mm m 1099 oxidised mild steel butt hinges 100x58x1.90 mm m 1100 oxidised mild steel butt hinges 75x47x1.70 mm m 1101 oxidised mild steel butt hinges 50x37x1.50 mm m 1102 oxidised mild steel parliamentary hinges 150x125x27x2.8 mm m 1103 oxidised mild steel parliamentary hinges 125x125x27x2.8 mm m 1104 oxidised mild steel parliamentary hinges 100x125x27x2.8 mm m 1105 oxidised mild steel parliamentary hinges 75x100x20x2.24 mm m 1106 oxidised mild steel sliding door bolt 300x16 mm m 1107 oxidised mild steel sliding door bolt 250x16 mm m 1108 oxidised mild steel tower bolt ( barrel type ) 250x10 mm m 1109 oxidised mild steel tower bolt ( barrel type ) 200x10 mm m 1110 oxidised mild steel tower bolt ( barrel type ) 150x10 mm m 1111 oxidised mild steel tower bolt ( barrel type ) 100x10 mm m 1112 oxidised mild steel handles 125 mm m 1113 oxidised mild steel handles 100 mm m 1114 oxidised mild steel handles 75 mm m 1115 oxidised mild steel screws 50 mm m 1116 oxidised mild steel screws 40 mm m 1117 oxidised mild steel screws 30 mm m 1118 oxidised mild steel screws 25 mm m 1119 oxidised mild steel screws 20 mm m 1120 anodised aluminium butt hinges 100x75x4 mm m 1121 anodised aluminium butt hinges 75x45x3.2 mm m 1122 anodised aluminium sliding door bolt 300x16 mm m 1123 anodised aluminium sliding door bolt 250x16 mm m 1124 anodised aluminium tower bolt ( barrel type ) 300x10 mm m 1125 anodised aluminium tower bolt ( barrel type ) 250x10 mm m 1126 anodised aluminium tower bolt ( barrel type ) 200x10 mm m 1127 anodised aluminium tower bolt ( barrel type ) 150x10 mm m 1128 anodised aluminium tower bolt ( barrel type ) 100x10 mm m 1129 anodised aluminium handles 125 mm with plate 175 x 32 mm m 1130 anodised aluminium handles 100 mm with plate 150 x 32 mm m 1131 anodised aluminium handles 75mm with plate 125 x 32 mm m 1132 anodised aluminium kicking plate 50 cm long 100x3.15 mm m 1133 exterior primer m 1134 black japan paint m 1135 superior copal varnish m 1136 oil type wood preservative m 1137 putty for wood work m 1138 plug m 1139 black colour dark shade pigment m 1140 red, chocolate, orange, buff or yellow ( red oxide of iron ) light shade pigment m 1141 green or blue medium shade pigment m 1142 ball bearing for rolling shutters m 1143 galvanised steel plain sheets m 1144 mild steel round bar 12 mm dia and below m 1145 structural steel such as tees, angles channels and r.s. joists m 1146 flats up to 10 mm in thickness m 1147 flats exceeding 10 mm in thickness m 1148 mild steel rivets m 1149 galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots m 1150 bolts and nuts up to 300 mm in length m 1151 bolts and nuts above 300 mm in length m 1152 superior class teak wood such as dandeli, balarshah or malabar in planks m 1153 first class teak wood in planks m 1154 second class teak wood in planks m 1155 second class deodar wood in planks m 1156 sal wood in scantling m 1157 precast heat resistant terrace tiles ( size 300x300 mm ) and 20 mm thick m 1158 g.i. plain washer thick m 1159 water proofing materials m 1160 welding by electric plant m 1161 20 mm dia holding down bolts m 1162 steel weld mesh m 1163 18 mm thick flamed finish granite stone slab m 1164 18 mm thick italian marble stone slab, perlato ( slab area up to 0.5 sqm ) . m 1165 commercial lpg in cylinder m 1166 surface box for stop cock m 1167 8 mm dia c.p. brass / s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c. m 1168 vitreous china pedestal for wash basin m 1169 flush pipe with union spreaders and clamps all in c.p. brass for single stall m 1170 flush pipe with union spreaders and clamps all in c.p. brass for double stall m 1171 stoneware pipes grade a ( 60 cm long ) 100 mm dia m 1172 white plastic seat ( solid ) with lid c.p. brass hinges and rubber buffers m 1173 black plastic seat ( solid ) with lid c.p. brass hinges and rubber buffers m 1174 c.i. trap for standard urinal with vent arm with operating and other couplings in c.p. brass: 50 mm dia m 1175 float glass panes of nominal thickness 4 mm ( weight not less than 10 kg / sqm ) m 1176 float glass panes of nominal thickness 5 mm ( weight not less than 12.50 kg / sqm ) m 1177 float glass panes of nominal thickness 8 mm ( weight not less than 20.00 kg / sqm ) m 1178 anodised aluminium hanging type door stopper m 1179 anodised aluminium pull bolt lock ( locking bolt ) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete m 1180 anodised aluminium casement stay 250 mm m 1181 pre laminated both side solid foam upvc profile ( 45x20mm ) m 1182 solid foam upvc sheet 20mm thick pre laminated on both side m 1183 pvc edge beading m 1184 expandable fastner with plastic sleeve m 1185 weather / structural non sag elastomeric pu sealant ( 600ml sausage ) for joints in rcc / brick / stone / wood / ceramic / gypsum / alluminium work complying to astm c920, din 18540 f & iso 11600 incl all taxes m 1186 structural sealant 6 mm x 12 mm m 1187 spacer tape 6.4 mm thick x 6 mm wide m 1188 weather sealant non staining ( 600 ml ) m 1189 weather sealant normal ( 300 ml ) m 1190 ms brackets / aluminium alloy brackets m 1191 silicon gasket in kg ( above 50 g / m ) m 1192 epdm gasket in kg ( above 60 g / m ) m 1193 anchor fastner m10 m 1194 ss bolt with washer of different sizes for structural glazing / acp cladding m 1195 ss screws of sizes for structural glazing / acp cladding m 1196 protective tape m 1197 gi flashing 1.2 mm thick m 1198 6 mm thick high performance glass m 1199 6 mm thick clear heat strengthened glass m 1200 6 mm thick clear heat strengthened glass m 1201 arms gs hd top hung 20 type p couple m 1202 connection block for vision glass panel m 1203 curtain wall striker for vision glass panel m 1204 adjustable fastening pawl for vision glass panel m 1205 corner drive for vision glass panel m 1206 top wedge block for vision glass panel m 1207 baker rod m 1208 fire stop m 1209 600x120 mm glass shelf with anodised aluminium angle frame, c.p. brass brackets and guard rail of standard size m 1210 galvanized iron ( 1.6 ± 0.2 mm ) thick reinforcement for big series casement window / door frame, sash, mullion, big & small series sliding window frame m 1211 galvanized iron ( 1.6 ± 0.2 mm ) thick reinforcement for big series sliding window / door sash m 1212 g.i fasteners 100 x 8 mm m 1213 stainless steel ( grade 304 ) hollow section round / square tubes m 1214 stainless steel bolts / square bar and plates m 1215 pressed steel door frames ( mild steel sheet 1.60 mm ) profile b m 1216 pressed steel door frames ( mild steel sheet 1.60 mm ) profile c m 1217 pressed steel door frames ( mild steel sheet 1.60 mm ) profile e m 1218 mild steel tubes hot finished welded type m 1219 mild steel tubes hot finished seamless type m 1220 mild steel tubes electric resistant or induction butt welded m 1221 circular c.i. box for ceiling fan internal dia 140 mm, 73 mm height, toplid of 1.5mm thick ms sheet m 1222 red oxide zinc chromate primer m 1223 brass 100mm mortice latch and lock with 6 levers without pair of handles m 1224 pair of anodised aluminium lever handles for 100 mm mortice latch and lock m 1225 12.5 mm thick tapered edge plain gypsum plaster borad confirming to is 2095 ( part i ) : 2011 m 1226 galvanised steel ceiling section ( size 80x26x0.50 mm ) m 1227 galvanised steel perimetre channel ( size 20x27x30x0.50 mm ) m 1228 galvanised steel intermediate channel ( size 15x45x15x0.90 mm ) m 1229 galvanised steel angle hanger ( celling angle ) ( size 25x10x0.50 mm ) m 1230 galvanised steel connecting clips ( 2.64 mm dia and 230 mm long gi wire ) m 1231 galvanised steel soffit cleat ( size 27x37x25x0.60 mm ) m 1232 joint filler m 1233 joint finisher m 1234 joint tape roll m 1235 all drive screws ( for gypsum board ) m 1236 primer ( for gypsum board ) m 1237 chlorpyriphos 20% e.c. / lindane 20% e.c. m 1238 acid proof cement m 1239 self tapping pan head nickel coated mild steel screws of size 13 x3.2 mm m 1240 fibre joint tape 50 mm wide ( 90 metre ) roll m 1241 12.5 mm thick fully perforated gypsum board m 1242 galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm m 1243 12.5 mm thick tapered edge moisture resistant plain gypsum plaster board confirming to is 2095 ( part i ) : 2011 m 1244 nickel plated m.s. pipe 25 mm dia m 1245 nickel plated m.s. pipe 20 mm dia m 1246 nickel plated m.s. brackets for curtain rod 20 mm m 1247 nickel plated m.s brackets for curtain rod 25 mm m 1248 oxidised mild steel screws 35 mm m 1249 rawl plug 50 mm ( designation 10 nos ) m 1250 aluminium tee channel ( heavy duty ) with rollers and stop end m 1251 aluminium hanging floor door stopper with twin rubber & stopper m 1252 hydraulic door closer tubular type aluminium section body m 1253 chequered precast cement concrete tiles 22 mm thick using marble chips of size 6mm light shade using white cement m 1254 acid and alkali resistant tiles 300x300 mm size, 10 mm thick m 1255 stainless steel kitchen sink with drain board 510 x 1040 mm bowl depth 200 mm m 1256 stainless steel kitchen sink without drain board 610x510 mm bowl depth 200 mm m 1257 coloured ( other than black ) solid p.v.c. seat in european w.c. pan m 1258 circular shape 450 mm dia mirror with plastic moulded frame m 1259 rectangular shape 453x357 mm mirror with plastic moulded frame m 1260 oval shape 450x350 mm ( outer dimensions ) mirror with plastic moulded frame m 1261 rectangular shape 1500x450 mm mirror with plastic moulded frame m 1262 hard board 6 mm thick m 1263 flexible ( coil shaped ) pvc waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i / c pvc waste fittings m 1264 flexible ( coil shaped ) pvc waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i / c pvc waste fittings m 1265 u pvc pipes ( working pressure 4 kg / cm² ) single socketed pipe 75 mm dia m 1266 u pvc pipes ( working pressure 4 kg / cm² ) single socketed pipe 110 mm dia m 1267 u pvc pipes ( working pressure 4 kg / cm² ) rubber ( seal ) ring 75 mm dia m 1268 u pvc pipes ( working pressure 4 kg / cm² ) rubber ( seal ) ring 110 mm dia m 1269 upvc coupler for upvc drainage pipes 75 mm m 1270 upvc coupler for upvc drainage pipes 110 mm m 1271 upvc pushfit coupler ( single ) 75 mm thick m 1272 upvc pushfit coupler ( single ) 110 mm thick m 1273 upvc single equal tee ( without door ) 75x75x75 mm m 1274 upvc single equal tee ( without door ) 110x110x110 mm m 1275 upvc single equal tee ( with door ) 75x75x75 mm m 1276 upvc single equal tee ( with door ) 110x110x110 mm m 1277 upvc bend 87.5° 75 mm bend m 1278 upvc bend 87.5° 110 mm bend m 1279 upvc plain shoe 75 mm bend m 1280 upvc plain shoe 110 mm bend m 1281 upvc pipe clip 75 mm bend m 1282 upvc pipe clip 110 mm bend m 1283 precast chequered cement tiles 22 mm thick dark shade using ordinary cement m 1284 precast chequered cement tiles 22 mm thick medium shade using 50% white cement 50% ordinary cement m 1285 epoxy paint m 1286 melamine polish m 1287 table rubbed polished stone 18mm thick ( 75x50cm ) granite stone 18 mm thick m 1288 pressed clay tiles 20mm thick 250x250 mm size m 1289 glass wool 50 mm thick m 1290 granite of any colour, 18 mm thick ( slab area above 0.50 sqm ) m 1291 aluminium t or l sections m 1292 double coupler m 1293 12 mm m.s. u beading m 1294 p.v.c. automatic flushing cistern 5 litre capacity m 1295 glass reinforced gypsum ( grg ) plaster board 12.5 mm thick confirming to is 2095 ( part 3 ) : 1996 m 1296 galvanised m.s. sheet 0.5 mm thick pressed channel section of size 50x32 mm m 1297 galvanised m.s. sheet 0.50 mm thick pressed stud : 48x34x36 mm m 1298 white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556 m 1299 12 mm dia 50 mm long wedge type expanded zinc alloy dash fastener m 1300 spigot for standard jointing m 1301 dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt m 1302 anodising 15 microns on aluminium sections m 1303 epdm gasket for upvc window / door m 1304 anodising 25 microns on aluminium sections m 1305 powder coating 50 microns on aluminium sections m 1306 polyester powder coating 50 microns on aluminium sections m 1307 double action hydraulic floor spring with stainless steel cover plate m 1308 6 mm dia g.i. adjustable hangers including clips ( up to 1.2 m length ) m 1309 double action hydraulic floor spring with brass cover plate m 1310 base jack m 1311 challies m 1312 cup locks m 1313 prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded ( medium density ) grade i, type ii conforming to is : 12823 ( exterior grade ) 12 mm thick m 1314 prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded ( medium density ) grade i, type ii conforming to is : 12823 ( exterior grade ) 12 mm thick m 1315 pvc blind pipe 150 mm dia as per is: 12818 m 1316 pvc blind pipe 200 mm dia as per is: 12818 m 1317 pvc slotted pipe 150 mm dia as per is: 12818 m 1318 pvc slotted pipe 200 mm dia as per is: 12818 m 1319 upvc blind pipe 100 mm dia as per is: 12818 m 1320 upvc slotted pipe 100 mm dia as per is: 12818 m 1321 epoxy m 1322 sbr polymer m 1323 acrylic polymer chemical for cracks m 1324 24 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish m 1325 30 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish m 1326 48mmx40mmx1.5mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish m 1327 upvc extruded ( small series ) casement window frame size 47x50mm m 1328 upvc extruded ( small series ) casement window sash / window mullion size 47x68 mm m 1329 upvc extruded glazing bead of appropriate dimension for small series casement window sash m 1330 upvc extruded glazing bead of appropriate dimension for big series of sliding window / door sash m 1331 upvc extruded ( big series ) 3 track sliding window / door frame size 116x45mm m 1332 upvc extruded ( small series ) 2 track sliding window sash / 3 track sliding window sash size 32x60mm m 1333 upvc extruded ( big series ) 2 track sliding window sash size 46x62mm m 1334 upvc extruded ( big series ) 3 track sliding window sash size 46x62mm m 1335 upvc extruded interlock of appropriate dimension for small series sliding window sash m 1336 upvc extruded interlock of appropriate dimension for big series sliding window / door sash m 1337 upvc extruded inline adaptor of appropriate dimension for big series sliding window / door sash m 1338 upvc extruded 2 track sliding door sash / 3 track sliding door sash ( big series ) size 46x82mm m 1339 a.p.p. modified 3 mm thick membrane reinforced with polyester matt m 1340 bitumen primer for bitumen membrane m 1341 geotextile 120 grams per sqm membrane m 1342 stainless steel screws 50 mm m 1343 stainless steel screws 40 mm m 1344 concealed zinc coated hinges 19 20 mm thick with mounting plate m 1345 acrylic exterior paint m 1346 premium acrylic exterior paint m 1347 textured exterior paint m 1348 galavanised ms 8 mm outer diameter m 6 dash fastener 50mm long m 1349 g.i main runner 15 x32 mm of 3000 mm length, 0.33 mm thick m 1350 g.i cross t 15 x32 mm of 1200 mm length, 0.33 mm thick m 1351 15 mm thick, light weight, integral densified micro look edged, false ceiling tiles of size 595x595 mm. m 1352 15 mm thick, light weight, fully perforated square / butt edge integral densified, false ceiling tiles of size 595x595 mm. m 1353 powder coated steel section main t ceiling sections 15x42x0.40 mm ( 3000 mm long ) m 1354 galvanized mild steel perimeter wall angle 22x19x0.40 mm ( 3000mm long ) m 1355 powder coated galvanised iron intermediate cross t section 15x42x0.40 mm ( 1200 mm long ) m 1356 powder coated galvanized iron intermediate cross t section 15x42x 0.40mm ( 600 mm long ) m 1357 12 mm thick micro tegular edged semi perforated grg ( glass fibre reinforced gypsum ) false celing tiles of size 595x595 mm m 1358 12 mm thick micro tegular edged fully perforated grg ( glass fibre reinforced gypsum ) false celing tiles of size 595x595 mm m 1359 galvanized iron intermediate cross t section 15x32x0.33 mm ( 600mm long ) m 1360 galavanised ms hanger rod 6mm dia ms fully threaded up to 1000mm length m 1361 calcium silicate tegular edged celling tiles 595x595 mm and 15 mm thick on edges m 1362 galvanised steel main tee ceiling section size 24x38x0.33 mm ( 3 metre long ) m 1363 galvanised steel perimeter wall angle size 24 x 24 x 0.40 mm ( 3.00 metre long ) m 1364 galvanised steel intermediate cross t section size 24 x 25 x 0.33mm ( 1.2 metre long ) m 1365 galvanised steel intermediate cross t section size 24 x 25 x 0.33mm ( 0.6 metre long ) m 1366 galvanised ms 8mm outer diameter m 6 dash fastener 25mm long m 1367 gi metal tile lay in plain tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick m 1368 gi metal tile lay in perforated tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick m 1369 pvc laminated gypsum tiles ( square edge ) of size 595x595 mm and 12.5 mm thick m 1370 gypsum tiles fully perforated square edge of size 595x595 mm and 12.5 mm thick m 1371 main t ceiling sections 24x38x0.3 mm ( 3 metre long ) m 1372 perimeter wall angle 24 x 24 x 0.3 mm ( 3 metre long ) m 1373 intermediate cross t section 24x25x0.3 mm ( 1.2 m long ) m 1374 intermediate cross t section 24x25x0.3 mm ( 0.6 m long ) m 1375 hanger rod 4 mm thick m 1376 adjustment clip 85x30x0.8 mm m 1377 soffit cleat ( size 27x37x25x1.60 mm ) m 1378 galavanised ms l shape level adjuster of size 85x25x2 mm m 1379 vitrified floor tile 50x50 cm conforming to is 15622:2006 group ( b1a ) m 1380 border tiles 200x75mm size m 1381 chlorinated polyvinyl chloride ( cpvc ) pipe 15 mm outer dia m 1382 chlorinated polyvinyl chloride ( cpvc ) pipe 20 mm outer dia m 1383 chlorinated polyvinyl chloride ( cpvc ) pipe 25 mm outer dia m 1384 chlorinated polyvinyl chloride ( cpvc ) pipe 32 mm outer dia m 1385 chlorinated polyvinyl chloride ( cpvc ) pipe 40 mm outer dia m 1386 chlorinated polyvinyl chloride ( cpvc ) pipe 50 mm outer dia m 1387 chlorinated polyvinyl chloride ( cpvc ) pipe 62.5 mm inner dia m 1388 chlorinated polyvinyl chloride ( cpvc ) pipe 75 mm inner dia m 1389 chlorinated polyvinyl chloride ( cpvc ) pipe 100 mm inner dia m 1390 chlorinated polyvinyl chloride ( cpvc ) pipe 150 mm inner dia m 1391 weather silicon sealant m 1392 stainless steel screws 30 mm x4 mm m 1393 masking tape m 1394 autoclaved aerated cement ( aac ) blocks m 1395 aluminium casement window fastener ( anodised ac 15 ) m 1396 aluminium casement window fastener ( powder coated ) m 1397 aluminium casement window fastener ( polyester powder coated ) m 1398 stainless steel screws 25 mm x4 mm m 1399 precoated galvanised iron profile sheet 0.50 mm tct m 1400 precoated galvanised steel plain ridges 0.50 mm tct and 500 600mm wide m 1401 precast c.c. kerb stone m 25 m 1402 interlocking c.c. paver block ( 60 mm thick, m 30 ) m 1403 punched tape concertina coil 600 mm dia 10 m openable length ( total length 90 m ) m 1404 rbt reinforced barbed wire m 1405 turn buckle and strengthening bolt m 1406 chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm m 1407 chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm, pvc coated to outer dia 5 mm m 1408 chain link fabric fencing mesh of size 25x25 mm made of g.i. wire of dia 3 mm m 1409 stainless steel cramps ( weight 260 grams ) with nuts, bolts and washer for dry stone cladding m 1410 telescopic drawer channels 300 mm long m 1411 stainless steel roller for sliding arrangement in racks / cupboards / cabinets shutter m 1412 50 mmx42 mmx2 mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish m 1413 25 mm thick factory made pvc flush door shutter i / c carriage m 1414 magnetic catcher triple strip vertical type m 1415 magnetic catcher double strip horizontal type m 1416 100 mm mortice lock with 6 levers for aluminium door m 1417 high polymer modified quickset tile adhesive m 1418 stainless steel wire guage ( grade 304 ) aperture 1.4 mm and 0.50mm dia wire m 1419 zinc alloy ( white powder coated ) touch lock withhook for upvc window / door m 1420 zinc alloy body with single nylon roller ( weight bearing capacity to be 40 kg ) for upvc sliding window m 1421 stainless steel ( ss 304 ) with adjustable double nylon roller ( weight bearing capacity to be 120 kg ) for upvc sliding door / window m 1422 zinc alloy ( white powder coated ) cresent lock for upvc sliding door / window m 1423 stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for upvc windows m 1424 stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for upvc windows m 1425 stainless steel friction hinges ( ss 304 grade ) size 300 x 19 x 1.9 mm for upvc window m 1426 stainless steel friction hinges ( ss 304 grade ) size 350 x 19 x 1.9 mm for upvc window m 1427 stainless steel friction hinges ( ss 304 grade ) size 400 x 19 x 1.9 mm for upvc window m 1428 wool pile / weather pile strip for upvc sliding window m 1429 aluminium grill as per is 1868 m 1430 toughened glass 12 mm thickness m 1431 8 mm thick calcium silicate perforated tiles of size 595 x595 mm m 1432 8 mm thick marble tiles ( polished ) raj nagar m 1433 chromium plated brass curtain rod 12 mm dia 1.25mm thick m 1434 chromium plated brackets ( curtain rods ) m 1435 pvc cleeves for screws m 1436 chromium plated brass curtain rod 20 mm dia 1.25mm thick m 1437 chromium plated brass curtain rod 25 mm dia 1.25mm thick...

Drinking Water And Sanitation Department - Jharkhand

31985506 procurement of rate of materials 1 m079 polythene water storage tank of isi mark ( e.g sintex / sinter / himgiri / gangotietc ) with cover and locking system 2 m193gi pipe 50 mm dia ( tata or equivalent make ) 3 m337jute 4 m922g.m. ferrules 5 ( i ) 8 mm dia wt. not less than 400 gms 6 ( ii ) 10 mm dia wt. not less than 400 gms 7 ( iii ) 15 mm dia wt. not less than 400 gms 8 ( iv ) 20 mm dia wt. not less than 600 gms 9 ( v ) 25 mm dia wt. not less than 900 gms 10 m923stop cocks 11 ( i ) 15 mm brass stop cock wt. not less than 300 gms 12 ( ii ) 20 mm brass stop cock wt. not less than 400 gms 13 ( iii ) 25 mm brass stop cock wt. not less than 575 gms 14 ( iv ) 32 mm brass stop cock wt. not less than 850 gms 15 ( v ) 40 mm brass stop cock wt. not less than 1.15 kg 16 ( vi ) 50 mm brass stop cock wt. not less than 2.15 kg 17 ( vii ) 15 mm dia c.i. body brass working part stop cock. 18 ( viii ) 20 mm dia c.i. body brass working part stop cock. 19 ( ix ) 25 mm dia c.i. body brass working part stop cock. 20 m924g.m. full way valve 21 ( i ) 15 mm dia wt. not less than 300 gms without wheel 22 ( ii ) 20 mm dia wt. not less than 400 gms without wheel 23 ( iii ) 25 mm dia wt. not less than 500 gms without wheel 24 ( iv ) 32 mm dia wt. not less than 700 gms without wheel 25 ( v ) 40 mm dia wt. not less than 1.0 kg without wheel 26 ( vi ) 50 mm dia wt. not less than 1.4 kg without wheel 27 ( vii ) 65 mm dia wt. not less than 1.8 kg without wheel 28 ( viii ) 80 mm dia wt. not less than 2.5 kg without wheel 29 m925g.m. non return valve vertical 30 ( i ) 15 mm dia wt. not less than 150 gms 31 ( ii ) 20 mm dia wt. not less than 250 gms 32 ( iii ) 25 mm dia wt. not less than 375 gms 33 ( iv ) 32 mm dia wt. not less than 600 gms 34 ( v ) 40 mm dia wt. not less than 700 gms 35 ( vi ) 50 mm dia wt. not less than 1.0 kg 36 ( vii ) 65 mm dia wt. not less than 1.20 kg 37 ( viii ) 80 mm dia wt. not less than 1.50 kg 38 ( ix ) 100 mm dia wt. not less than 1.80 kg 39 m926g.m. non return valve horizontal 40 ( i ) 15 mm dia wt. not less than 150 gms 41 ( ii ) 20 mm dia wt. not less than 250 gms 42 ( iii ) 25 mm dia wt. not less than 375 gms 43 ( iv ) 32 mm dia wt. not less than 600 gms 44 ( v ) 40 mm dia wt. not less than 700 gms 45 ( vi ) 50 mm dia wt. not less than 1.0 kg 46 ( vii ) 65 mm dia wt. not less than 1.20 kg 47 ( viii ) 80 mm dia wt. not less than 1.50 kg 48 ( ix ) 100 mm dia wt. not less than 1.80 kg 49 m927 cocks 50 ( i ) 15 mm dia g.m. bib cock wt. not less than 300 gms 51 ( ii ) 15 mm dia brass bib cock wt. not less than 400 gms 52 ( iii ) 15 mm dia c.i. bib cock wt. not less than 400 gms 53 ( iv ) 15 mm dia c.i. body brass working part spray painted bib cock wt. not less than 400 gms 54 ( v ) 15 mm dia c.i. brass pillar cock cock wt. not less than 400 gms 55 ( vi ) 15 mm c.i. plug cock ordinary 56 ( vii ) 15 mm c.i. push cock ordinary 57 m928chromium plated brass fittings 58 ( i ) c.p. shower rose 100 mm dia 59 ( ii ) c.p. shower rose 125 mm dia 60 ( iii ) p.v.c. shower rose 150 mm dia 61 ( iv ) p.v.c shower rose 125 mm dia 62 m929connection pipe 63 ( i ) 15 mm dia x 30 cm. long lead connection pipe with brass fittings. 64 ( ii ) 15 mm dia x 45 cm. long lead connection pipe with brass fittings. 65 ( iii ) 15 mm dia x 30 cm. long pvc connection pipe with brass fittings. 66 ( iv ) 15 mm dia x 45 cm. long pvc connection pipe withbrass fittings. 67 m930g.i. fittings ( conforming to i.s. 1879 ) isi marked 68 [ a ] g.i. bend 69 ( i ) 15 mm 70 ( ii ) 20 mm 71 ( iii ) 25 mm 72 ( iv ) 32 mm 73 ( v ) 40 mm 74 ( vi ) 50 mm 75 ( vii ) 65 mm 76 ( viii ) 80 mm 77 ( ix ) 100 mm 78 ( x ) 125 mm 79 ( xi ) 150 mm 80 [ b ] elbow of the following sizes 81 ( i ) 15 mm 82 ( ii ) 20 mm 83 ( iii ) 25 mm 84 ( iv ) 32 mm 85 ( v ) 40 mm 86 ( vi ) 50 mm 87 ( vii ) 65 mm 88 ( viii ) 80 mm 89 ( ix ) 100 mm 90 ( x ) 125 mm 91 ( xi ) 150 mm 92 [ c ] tee plain of the following sizes 93 ( i ) 15 mm 94 ( ii ) 20 mm 95 ( iii ) 25 mm 96 ( iv ) 32 mm 97 ( v ) 40 mm 98 ( vi ) 50 mm 99 ( vii ) 65 mm 100 ( viii ) 80 mm 101 ( ix ) 100 mm 102 ( x ) 125 mm 103 ( xi ) 150 mm 104 [ d ] reducing tee plain of the following sizes ( taking larger dimension ) 105 ( i ) 20 mm 106 ( ii ) 25 mm 107 ( iii ) 32 mm 108 ( iv ) 40 mm 109 ( v ) 50 mm 110 ( vi ) 65 mm 111 ( vii ) 80 mm 112 ( viii ) 100 mm 113 ( ix ) 125 mm 114 ( x ) 150 mm 115 [ e ] socket plain of the following size ( taking larger dimension ) 116 ( i ) 15 mm 117 ( ii ) 20 mm 118 ( iii ) 25 mm 119 ( iv ) 32 mm 120 ( v ) 40 mm 121 ( vi ) 50 mm 122 ( vii ) 65 mm 123 ( viii ) 80 mm 124 ( ix ) 100 mm 125 ( x ) 125 mm 126 ( xi ) 150 mm 127 [ f ] reducing socket plain of the following sizes ( taking larger dimension ) 128 ( i ) 20 mm 129 ( ii ) 25 mm 130 ( iii ) 32 mm 131 ( iv ) 40 mm 132 ( v ) 50 mm 133 ( vi ) 65 mm 134 ( vii ) 80 mm 135 ( viii ) 100 mm 136 ( ix ) 125 mm 137 ( x ) 150 mm 138 [ g ] union socket of the following sizes 139 ( i ) 15 mm 140 ( ii ) 20 mm 141 ( iii ) 25 mm 142 ( iv ) 32 mm 143 ( v ) 40 mm 144 ( vi ) 50 mm 145 ( vii ) 65 mm 146 ( viii ) 80 mm 147 ( ix ) 100 mm 148 ( x ) 125 mm 149 ( xi ) 150 mm 150 [ h ] plugs of the following sizes 151 ( i ) 15 mm 152 ( ii ) 20 mm 153 ( iii ) 25 mm 154 ( iv ) 32 mm 155 ( v ) 40 mm 156 ( vi ) 50 mm 157 ( vii ) 65 mm 158 ( viii ) 80 mm 159 ( ix ) 100 mm 160 ( x ) 125 mm 161 ( xi ) 150 mm 162 [ i ] jam nuts of the following sizes 163 ( i ) 15 mm 164 ( ii ) 20 mm 165 ( iii ) 25 mm 166 ( iv ) 32 mm 167 ( v ) 40 mm 168 ( vi ) 50 mm 169 ( vii ) 65 mm 170 ( viii ) 80 mm 171 ( ix ) 100 mm 172 ( x ) 125 mm 173 ( xi ) 150 mm 174 [ j ] g.i. nipple of the following sizes 175 ( i ) 15 mm dia x 100 mm long 176 ( ii ) 20 mm dia x 100 mm long 177 ( iii ) 25 mm dia x 100 mm long 178 ( iv ) 32mm dia x 100 mm long 179 ( v ) 40 mm dia x 100 mm long 180 ( vi ) 50 mm dia x 100 mm long 181 ( vii ) 65 mm dia x 100 mm long 182 ( viii ) 80 mm dia x 100 mm long 183 ( ix ) 100 mm dia x 100 mm long 184 [ k ] g.i. pipes midium ( tata mark ) or equivalent as per is 1239 ( part 01 ) / 2004 isi marked / medium quality 185 ( i ) 15 mm dia 186 ( ii ) 20 mm dia 187 ( iii ) 25 mm dia 188 ( iv ) 32 mm dia 189 ( v ) 40 mm dia 190 ( vii ) 65 mm dia 191 m931mirrors 192 ( a ) mirror of 6 mm thick plain glass 600 mm x 450 mm beveled edge mirror includingc.p. brass revolving fittings 3 mm plywood boardand c.p. hinges etc.to fix the mirror 193 ( b ) do 450 mm x 300 mm do 194 m932 ( a ) glass shelf 600 mm x 125 mm with c.p. brass rail 195 ( b ) do 450 mm x 125 mm do 196 m933 ( a ) c.p. brass towel rail 20 mm x 600 mm with bracket all complete 197 ( b ) anodized aluminum 20 mm x 600 mm towel rail complete with brackets 198 m934c.p. brass soap dish medium quality with screw andhinges etc. 199 m935c.p. liquid soap solution holder 200 m936vitreous white glazed indian water closet of hindustan / parry ware / cera / naycer or anyotherequivalent make 201 ( a ) 580 mm long 202 ( b ) 510 mm long 203 ( c ) 450 mm long 204 ( d ) 510 mm long white glazed fiber i.w.c 205 m937pair of vetreous white glazed foot rest of hindustan / parryware / cera / naycer or any other equivalent make 206 m93815 liters capacity pull and let go high level c.i. cistern complete with ball cock and a pair of bracket 207 m939 ( a ) 12.5 liters lowdown c.i. cistern 208 ( b ) 10.0 liters capacity p.v.c. low design cistern 209 m940 ( a ) white glazed vitreous e.w.c with p trap orany other equivalent make 210 ( b ) e.w.c with s trap 400 mm high of hindustan / parry ware / cera / naycear or any other equivalent make 211 ( c ) black / white plastic seat for e.w.c do as above. 212 m941 ( a ) white glazed vitreous earthen were urinal flat back of hindustan / parryware / cera / naycer or any other equivalent make 600 mm x 350 mm size 213 ( b ) do squatting small 450 mm x 350 mm 214 ( c ) do squatting large 600 mm x 350 mm 215 ( d ) white glazed vitreous earthen ware urinal standing corner size 600 mm x 350 mm hindustan / parryware / cera / naycer or any other equivalent make 216 ( e ) partition plate for urinal 25 x 13 size 217 ( f ) 5 liters c.i. automatic cistern with all p.v.c fittings 218 m942white glazed vitreous wash hand basin 550 mm x 400mm size of hindustan / parryware / cera / naycer or any otherequivalent make 219 m943white glazed vitreous earthen ware kitchensinks of hindustan / parryware / cera / nayceror any other equivalent make 220 ( a ) kitchen sink 600 mm x 450 mm x 200 mm ( 24 x 18 x 8 ) 221 ( b ) kitchen sink 600 mm x 450 mm x 250 mm ( 24 x 18 x 10 ) 222 ( c ) lab sink 450 mm x 300 mm x 150 mm ( 18 x 12 x 6 ) 223 ( d ) lab sink 300 mm x 250 mm x 150 mm ( 12 x 10 x 6 ) 224 m944drain board 225 ( a ) 600 mm x 450 mm ( 24 x 18 ) 226 ( b ) 525 mm x 450 mm ( 21 x 18 ) 227 m945h.c.i. pipes 228 ( a ) 50 mm dia single socket 6 0 ( with ear weight 13 kg ) 229 ( b ) 80 mm dia single socket 6 0 ( with ear weight 18 kg ) 230 ( c ) 100 mm dia single socket 6 0 ( with ear weight 23 kg ) 231 ( d ) 150 mm dia single socket 6 0 ( with ear weight 30 kg ) 232 ( e ) 50 mm dia double socket 6 0 ( with ear weight 14 kg ) 233 ( f ) 80 mm dia double socket 6 0 ( with ear weight 19 kg ) 234 ( g ) 100 mm dia double socket 6 0 ( with ear weight 25 kg ) 235 ( h ) 150 mm dia double socket 6 0 ( with ear weight 13 kg ) 236 ( i ) 50 mm dia single socket 3 0 ( with ear weight 7.25 kg ) 237 ( j ) 80 mm dia single socket 3 0 ( with ear weight 10.5 kg ) 238 ( k ) 100 mm dia single socket 3 0 ( with ear weight 13.75 kg ) 239 ( l ) 150 mm dia single socket 3 0 with ear 240 ( m ) 50 mm dia single socket 2 0 ( with ear weight 5.35 kg ) 241 ( n ) 80 mm dia single socket2 0 ( with ear weight 8.00 kg ) 242 ( o ) 100 mm dia single socket 2 0 ( with ear weight 10.10 kg ) 243 ( p ) 150 mm dia single socket 2 0 with ear 244 ( q ) 50 mm dia single socket 1 0 ( with ear weight 3.4 kg ) 245 ( r ) 80 mm dia single socket 1 0 ( with ear weight 5.50 kg ) 246 ( s ) 100 mm dia single socket 1 0 ( with ear weight 7.60 kg ) 247 ( t ) 150 mm dia single socket 248 m946h.c.i. fittings. 249 ( i ) plain bend of following size 250 ( a ) 50 mm dia ( weight without ear and socket 2.75 kg ) 251 ( b ) 80 mm dia ( weight without ear and socket 3.5 kg ) 252 ( c ) 100 mm dia ( weight without ear and socket 4.5 kg ) 253 ( d ) 150 mm dia ( weight without ear and socket 4.5 kg ) 254 ( ii ) bend with door with following size 255 ( a ) 50 mm dia ( wight without ear and socket 2.75 kg ) 256 ( b ) 80 mm dia ( wight without ear and socket 4.00 kg ) 257 ( c ) 100 mm dia do 5.5 kg 258 ( d ) 150 mm dia do 259 ( iii ) single junction with door of followings sizes. 260 ( a ) 50 mm dia ( weight without ear and socket 3.75 kg ) 261 ( b ) 80 mm dia ( weight without ear and socket 6.50 kg ) 262 ( c ) 100 mm dia do 9.50 kg 263 ( d ) 150 mm dia do 264 ( iv ) double junction with door of following sizes. 265 ( a ) 50 mm dia do 4.5 kg 266 ( b ) 80 mm dia do 7.00 kg 267 ( c ) 100 mm dia do 13.00 kg 268 ( d ) 150 mm dia do 269 ( v ) heel rest bend of following sizes 270 ( a ) 50 mm dia 271 ( b ) 80 mm dia 272 ( c ) 100 mm dia 273 ( d ) 150 mm dia 274 ( vi ) cowel of following sizes 275 ( a ) 50 mm dia ( weight without ear and socket 2.25 kg ) 276 ( b ) 80 mm dia ( weight without ear and socket 3.25 kg ) 277 ( c ) 100 mm dia ( weight without ear and socket 3.25 kg ) 278 ( d ) 150 mm dia do 279 ( vii ) 100 mm dia p trap ( wt without ear and socket ) 8.5 kg 280 ( viii ) 100 mm dia p trap ( wt without ear and socket ) 8.8 kg 281 ( ix ) 100 mm x 80 mm floor trap ( weight without ear and socket ) 4.00 kg 282 ( x ) pass over 50 mm x 150 mm for 50 mm projection 283 ( xi ) do 100 mm x 150 mm for 100 mm projection 284 ( xii ) inverted junction single 100 mm x 50 ( weight without ear and socket ) 9.0 kg 285 ( xiii ) inverted junction double 100 mm x 50 mm x 50 mm ( weight without ear and socket ) 12.0 kg 286 ( xiv ) h.c.i. offset 80 mm projection of the following size 287 ( a ) 50 mm dia ( weight without ear and socket ) 2.75 kg 288 ( b ) 80 mm dia do 3.50 kg 289 ( c ) 100 mm dia do 5.00 kg 290 ( d ) 150 mm dia do 291 ( xv ) h.c.i. socket of following sizes 292 ( a ) 50 mm dia ( weight without ear ) 1.50 kg 293 ( b ) 80 mm dia ( weight without ear ) 3.00 kg 294 ( c ) 100 mm dia ( weight without ear ) 4.50 kg 295 ( d ) 150 mm dia ( weight without ear ) do 296 m947c.i. cover with frame for manhole and inspection chamber 297 ( a ) 600 mm x 450 mm size ( wt. 39 kg ) 298 ( b ) 600 mm x 450 mm size ( wt. 25 kg ) 299 ( c ) 500 mm x 450 mm size ( wt. 25 kg ) 300 m948c.i. bracket pair for w.h.b 301 ( a ) 550 mm x 400 mm size ( 22 x 16 ) 302 ( b ) do for 12.5 liter cistern 303 ( c ) do for 600 mm x 450 mm ( 24 x 18 ) sink 304 ( d ) 40 mm x 60 mm ms plate bracket for sink as above 305 m949 ( a ) 32 mm ( 1 1 / 4 ) c.p. brass waste for w.h.b 306 ( b ) 40 mm ( 1 1 / 2 ) c.p. brass waste for w.h.b for sink 307 ( c ) 32 mm ( 1 1 / 4 ) c.p. waste of white metal 308 ( d ) 40 mm ( 1 1 / 2 ) c.p. waste of white metal 309 m950 ( a ) 32 mm ( 1 1 / 4 ) p.v.c. waste pipe 750 mm long ( 26 long ) withbrass union for w h b 310 ( b ) 40 mm ( 1 1 / 2 ) p.v.c. waste pipe 750 mm long ( 26 long ) with brass union for w h b 311 m95132 mm ( 1 1 / 4 ) p.v.c. telescopic flush pipe with brass union for high level cistern 312 m952rubber inserttion 3 mm ( 1 / 8 ) thick 313 m953pig lead 314 m954yarn 315 m955rubber gasket for d.i pipe of good quality 316 ( a ) 80 mm 317 ( b ) 100 mm 318 ( c ) 125 mm 319 ( d ) 150 mm 320 ( e ) 200 mm 321 ( f ) 250 mm 322 ( g ) 300 mm 323 ( h ) 350 mm 324 ( i ) 400 mm 325 ( j ) 450 mm 326 ( k ) 500 mm 327 ( l ) 600 mm 328 ( m ) 700 mm 329 ( n ) 750 mm 330 ( o ) 800 mm 331 ( p ) 900 mm 332 ( q ) 1000 mm 333 ( r ) 1200 mm 334 m956cotton waste 335 m957asbestos suta ( gland packing ) 336 m958solvent cement 337 m959hydrocloric acid ( sepecific gravity 1.20 ) 338 m960cp & pvc fitting 339 ( i ) 32 mm dia c.p. waste 340 ( ii ) 32 mm dia pv c waste pipe 750 mm long with coupling 341 ( iii ) 40 mm dia c.p. waste 342 ( iv 40 mm dia pvc waste pipe 750 mm long with coupling 343 ( v 100 mm dia steel jali 344 ( vi ) 15 mm dia c.p. nipple with coupling ( short pieces ) 345 ( vii ) 50 mm dia pvc pipe with coupling 346 m961special type of c.p. bath room fittings for v.i.p.buildings ( jal, jaquar, marc or equivalent mark ) 347 ( i ) pillar cock ( isi ) 348 ( ii ) pillar cock ( long neck ) 349 ( iii ) bib cock ( isi ) 350 ( iv ) bib cock ( long thread ) 351 ( v ) angular stop cock 352 ( vi ) angular stop cock ( long thread ) 353 ( vii ) concealed stop cock reduce ( isi ) 354 ( viii ) concealed stop cock heavy duty extra adjustable wall flange 355 ( ix ) long body bib cock 356 ( x ) swan neck tap with left hand operating knob 357 ( xi ) central hole basin mixer ( best quality ) 358 ( xii ) wall mixer with telephonic shower arrangement 359 ( xiii ) wall mixer with provision for over head shower with elbow coupling and well flange 360 ( xiv ) wall mixer 3 in 1 system with provision for over head shower with elbow coupling and wall flange 361 ( xv ) sink mixer with swinging casted spout 362 ( xvi ) sink cock with swinging casted spout 363 ( xvii ) 4 way diverter for concealed fittings 364 ( xviii ) pressure adjustable shower with revolving joint 365 ( xix ) telephone shower with flexible pipe 366 ( xx ) flush cock with wall flange ( 25 mm ) 367 ( xxi ) towel rail 24 368 ( xxii ) towel ring 369 ( xxiii ) soap dish 370 ( xxiv ) tumbler holder 371 ( xxv ) toilet paper holder 372 ( xxvi ) glass shelf 22 373 ( xxvii ) corner glass shelf with bracket 374 ( xxviii ) flush valve complete with 32 mm size controlcock & flange 375 m962c.i special & pvc pipes 376 1. c.i double shocketted fittings bend such as bend, tee, taper, 377 ( a ) 80 200 mm 378 ( b ) 250 700 mm 379 ( c ) 700 1000 mm 380 2. c.i double flange fittings such as tee, taper, tailpiece, bend etc 381 ( a ) 80 200 mm 382 ( b ) 250 700 mm 383 ( c ) 700 1000 mm 384 spare parts of hand pump 385 m963hexagonal bolt m12x1.75x40mm long common to marks ii & iii 386 m964hexagonal nut m12x1.75mm 387 m965washer m12 ( 2.5mm thick ) 388 m966high tensile bolt m10x1.5x40mm long. 389 m967nyloc nut m10x1.5mm 390 m968handle axle ( stainless steel ) 391 m969washer for handle axle ( 4mm thick ) 392 m970ball bearing 6204 z 393 m971spacer for handle. 394 m972chain with coupling. 395 m973hexagonal bolt for front cover m12x1.75mm long. 396 m974nitrile rubber cup washer for mark – ii & iii 397 m975nitrile sealing ring mark – ii 398 m976nitrile rubber seating big for lower valve mark ii 399 m977nitrile rubber seating small for upper valve mark ii. 400 m978hexagonal rod coupling m12x1.75x50mm long. 401 m979pump head assembly ( g.i. ) with front cover, bolt & third plate. 402 m980front cover ( g.i. ) 403 m981handle assembly ( g.i. ) 404 m982 ( a ) water tank assemblyfor mark – ii ( g.i. ) 405 ( b ) water tank assembly for mark – iii ( vlom 65 ) 406 m983stand assembly ( g.i. ) normal. 407 m984stand assembly ( telescopic ) ( g.i ) . 408 m985connecting rod 3mtr. long with coupling and nut ( electrogalvanized ) 409 m986a ) cylinder assembly complete set for mark ii 410 b ) cylinder assembly complete set for mark iii ( vlom 65 ) 411 m987a ) upper valve assembly complete set for india mark ii 412 b ) upper valve assembly complete set for india mark iii ( vlom 65 ) 413 m988a ) lower valve assembly complete set for india mark ii 414 b ) lower valve assembly complete set for im iii 415 m989reducer cap for cylinder mark ii 416 m990a ) plunger rod ( s.s. ) for mark – ii 417 b ) plunger rod ( s.s. ) for mark – iii 418 m991upper valve guide ( g.m. ) . 419 m992rubber seat retainer for mark ii 420 m993third plate for head assembly ( galanized ) 421 m994cylinder body with brass liner for im ii with reducer cap for top and bottom. 422 m995gun metal spacer. 423 m996check valve guide mark ii 424 m997a ) check valve seat for mark – ii 425 b ) check valve seat for mark – iii 426 m998nitrile rubber “o” ring ( vlom 65 ) 427 m999push rod for mark – iii ( s.s ) . 428 m1000check nut for push rod ( s.s. ) . 429 m1001nitrile rubber cup washer for vlom 50 430 m1002nitrile rubber sealing ring for mark – iii vlom 65 431 m1003nitrile rubber seating big for lower valve mk ii 432 m1004nitrile rubber seating big for lower valve m iii vlom 65 ) 433 m1005nitrile rubber bobbin vlom 50 434 m1006nitrile rubber “o” ring vlom 50 435 m1007nitrile rubber cone for vlom 50 436 m1008nitrile rubber cone for vlom 65 437 m1009nitrile rubber centralizer 150mm for ( vlom 65 ) . 438 m1010nitrile rubber centralizer 125mm for ( vlom 65 ) . 439 m1011nitrile rubber centralizer 150mm for ( vlom 50 ) . 440 m1012nitrile rubber centralizer 125mm for vlom 50 441 m1013nitrile rubber centralizer 100mm for vlom 50 442 m1014water tank assembly mark – iii vlom 50 443 m1015cylinder assembly complete set for mark – iii ( vlom 50 ) 444 m1016upper valve assembly complete set for im iii ( vlom 50 ) 445 m1017lower valve assembly complete set for im iii ( vlom 50 ) 446 m1018a ) upper cap cylinder mark – iii ( vlom 65 ) 447 b ) upper cap cylinder mark – iii ( vlom 50 ) 448 m1019a ) bottom cap for mark – iii ( vlom 50 ) 449 b ) bottom capfor mark – iii ( vlom 65 ) 450 m1020follower for im iii 451 m1021cage for mark iii 452 m1022s.s. hexagonal bolt m 6x25mm long. 453 m1023basic rate of standard i.s.i. mark deep well hand pump for india mark 2, i.s.i. 15500 ( part 2 ) / 2004 with latest revision including 12mm x 3meter long 8 no. connecting rods made of bright bar electro galvanized fitted with coupler & normal stand assembly ecommended for use with cylinder assembly suitable for bore well dia 100 to 125mm casing pipe. 454 m1024basic rate of upvc pipe 125mm dia conforming to i.s.i. latest revision is 12818 / 2016 cml no. 5543459 455 m1025basic rate of 32mm g.i. pipe in 3 mtrs. length ( medium ) with seamless socket as per relevent b.i.s. specificationis 1239 ( part i ) / 2004 456 m1030rcc esr 457 designing ( aesthetically ) , and constructing rcc elevated service reservoirs of following capacity with rcc staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for esr having capacity upto 500 cum and not more than 6m c / c for esr having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the in side and out side face of the container and also plaster with plastic paint in all columns and bracingsincluding refilling disposing off the surplus stuff with in a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as m.s. ladder out side, stainless steel lader in contenor, c.i. manhole frame and covers, water level indicators, lightening conductor, g.i. pipe railing around walk way and top slab, providing stair case from ground level to roof level, m.s. grill gate of 2m height with locking arrangement of approved design, b.b. masonry chambers for all valves, ventilating shafts, providing and applying three coats of acrylie emulsion with silicon edditives paint to the structure incluingroof slab, epoxy painting to internal surface and anti termite treatment for under ground part soft he structure and giving satisfactory water tightness test as per i.s. code. the job to include painting then ame of the scheme and other details on thereservoir as per the directions of engineer in charge. 458 notes 459 the design of the structure be in accordance with relevant i.s. specification ( i.s. 3370 1965 or revised. ) 460 the design shall satisfy the stipulations as per i.s. 1893 1984 and i.s.13920 / 1993 for seismic force and i.s. 11682 / 1985 for r.c.c. staging of over head tanks. 461 for design having more than 6 columns, suitable bracing is obligatory. 462 plain round mild steel bars grade i conforming to i.s.432 part i orhigh yield strength deformed bars conforming to i.s. 1786 or i.s. 1139 shall beused, grade i imildsteel bars will not be allowed 463 irrespective of the type of foundation proposed in the design, one set of bracing be provided at the ground level. 464 these rates include providing m.s. ladder for e.s.r.s upto 2 lakh litres capacity and providing spiral stair case for e.s.r. above 2 lakh litres capacity. 465 staging shall have to bede signed with stresses of m 200 concrete for esr. however all rcc construction should be donein m 250. structures in contact with water shall be designed & casted in m 300 466 these rates are including the cost of up lift pressure if any and entire dewatering during execution. incase of water logging are a where water is struck at shallow depth, extra provision of dewatering shall be made as per site condition. 467 all conditions given in the member secretarys circular no. mjp / ts i / 350 / 1668 dt. 2 8 97 and mjp / s i / 350 / 2127 dt. 13 7 99 shall be strictly followed and additional cost, if any, due to these conditions is included in the rates mentioned below. 468 75 % part rate shall be payable for reinforcement concrete and plastering items of containers of e.s.r. till satisfactory hydraulic testing for water tightness is given; and till that work shall be treated as incomplete. 469 the rates indicated in the table are excluding the cost of pipes, specials and valves required for inlet, outlet, washout, overflow and bypass arrangement. the scope of work, however, includes cost of erecting, laying and jointing of pipe and valves including cost of jointing materials upto 5 m beyond outer face of outer most column ( cost of pipe, specials and valves is taken as 10% of the cost of esr as per table ) . 470 for esr upto 500 cum capacity c.i. double flanged pipes upto 300 mm dia shall be provided and c.i. specials shall be used. for esr above 500 cum capacity c.i. / m.s. pipe assembly with minimum 8 mm thickness upto 500 mm dia and minimum 10 mm thickness above 500 mm dia can be used with proper anti corrosive epoxy treatment from in side and out side. 471 below mentioned rates are for foundation swith individual footing with bearing capacity of 20 tonnes per square metre. for raft foundations, these rates shall be increased by 7.5% where safe bearing capacity ( sbc ) is 5 mt per sqm and by 5 % where sbc is more than 5mt / sqm and upto 10 mt / sqm. this % of5 % or 7. 5 % is applicable for estimation of amount of lumpsum item of esr. for extra item due to change from individual foundation to raft, actual increase in concrete and steel be paid as per relevant dsr item. 472 the rate shall be increased by 30 % for bearing piles upto depth of 10 m and for further increased in depth by 5 m each, it shall be increased by another 10%. these rates are applicable where raft is not feasible. for pile foundations sulphate resistant cement shall only beused. single pile for the column is not permitted, group of piles shall be designed with pile cap for each column of esr. 473 the rates are applicable for staging height of 12 m. these rates shall be increased or decreased for per metre variation in this staging height as below : 474 12 to 16 m staging 2% per metre 475 16 to 20 m staging 3% per metre 476 20 m and above 4% per metre 477 for 17 m staging height, percentage calculation will be like below : 478 12 to 16 m 4 x 2 = 8% 479 16 & 17 m 1 x 3% = 3% total = 11% 480 for 21 m staging height, percentage calculation will be like below : 481 12 to 16 m 4 x 2 = 8% 482 16 to 20 m 4 x 3% = 12% 483 20& 21 m 1 x 4% = 4% total = 24% 484 following rates are for seismic zone iii. for zone iv, these rates shall be increased by 5% and for zone ii, these rates shall be decreased by 5%. concerned executive engineer shall confirm the seismic zone for the scheme from seismic zone splan before estimation and adopt appropriate rates as per actual seismic zones. ( seismic maps attached in this csr ) . 485 notes 486 conditions from sr.no.1 to 10 shall form a part and parcel of the tender and must be included in the draft tender papers for works of r.c.c. e.s.r. 487 conditions from sr.no.11 to 16 are for estimation purpose only and shall not appear in the tender. 488 rates for rcc esrs 489 upto 25, 000 litres 490 cost of 25, 000 litres capacity 491 add for capacity above 25, 000 upto 50, 000 litres 492 cost of 50, 000 litres capacity 493 add for capacity above 50, 000 upto 75, 000 litres 494 cost of 75, 000 litres capacity 495 add for capacity above 75, 000 upto 1, 00, 000 litres 496 cost of 1, 00, 000 litres capacity 497 add for capacity above 1, 00, 000 upto 1, 50, 000 litres 498 cost of 1, 50, 000 litres capacity 499 add for capacity above 1, 50, 000 upto 2, 00, 000 litres 500 cost of 2, 00, 000 litres capacity 501 add for capacity above 2, 00, 000 upto 2, 50, 000 litres 502 cost of 2, 50, 000 litres capacity 503 add for capacity above 2, 50, 000 upto 3, 00, 000 litres 504 cost of 3, 00, 000 litres capacity 505 add for capacity above 3, 00, 000 upto 4, 00, 000 litres 506 cost of 4, 00, 000 litres capacity 507 add for capacity above 4, 00, 000 upto 5, 00, 000 litres 508 cost of 5, 00, 000 litres capacity 509 add for capacity above 5, 00, 000 upto 7, 50, 000 litres 510 cost of 7, 50, 000 litres capacity 511 add for capacity above 7, 50, 000 upto 10, 00, 000 litres 512 cost of 10, 00, 000 litres capacity 513 add for capacity above 10, 00, 000 upto 15, 00, 000 litres 514 cost of 15, 00, 000 litres capacity 515 add for capacity above 15, 00, 000 upto 20, 00, 000 litres 516 cost of 20, 00, 000 litres capacity 517 m1031rcc gsr and sump 518 designing ( aesthetically ) , and constructing rcc ground service reservoirs / rcc sumps in m 300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top rcc roof slab / or dome, 20 mm thick cement plaster with water proofing compound in cm 1:3 proportion. to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 m, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye pass arrangement consisting of c.i. / m.s. d / f. pipes, specials and valves of given diameters, providing and fixing accessories such as m.s. ladder inside and outside, c.i. manhole frame and cover, water top slab, b.b. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per is code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. 519 anti –termite treatment shall be given for under ground portion of the structure. 520 notes 521 the design shall be in accordance with various relevant i.s. specification ( i.s.456 / 2000, i.s.875 1987, i.s.3370 1965 or revised. ) 522 only m.s. bars grade i conforming to i.s. 432 part i or high yield strength deformed bars conforming to i.s. 1786 or i.s.1139 shall be used.grade ii m.s. bars shall not be used. 523 entire structure shall be in m 300 only. 524 the scope of pipe assembly work shall be upto 5 metre beyond out side face of the wall, cost of pipes valves and specials is not included in the rate but labour cost for laying and jointing is included. 525 the g.s.r. / sump above 15 lakh litres capacity shall be in two compartment. 526 the job includes designing the structure for up lift pressure and dewatering if required during entire execution and disposal of surplus excavated stuff within lead of 50 metres as directed by engineer in charge. if up lifts considered in design, then these rates shall be increased by 7.5%. 527 g.s.r. outlets shall be with bell mouth of approved pattern in bottom slab and cost of designing bell mouth is included in the rate. sump well includes cost of suction pit required at bottom. 528 for pipe diameters upto 300mm only cipipes and ci specials shall be used. for pipe diameters above 300mm, m.s. pipes and specials minimum 10mm thick shall be used with proper anti corrosive epoxy treatment from inside and outside. 529 cost of pump house is not included in these rates. 530 above rates are applicable for seismic zones 2, 3 and 4. 531 75% part rate shall be payable for reinforcement, concrete and plastering items of all types of g.s.r. sand sump still satisfactory hydraulic testing for water tightness test is given and till that work shall be treated as incomplete. 532 10% shall be added for sump if over head pump house is proposed. 533 note: conditions from sr.no.1 to 11 shall form a part and parcel of tender and must be included in the draft tender papers for work of r.c.c .gsrs and sumps. 534 rates for rcc gsrs and sumps 535 upto 25, 000 litres 536 cost of 25, 000 litres capacity 537 add for capacity above 25, 000 upto 50, 000 litres 538 cost of 50, 000 litres capacity 539 add for capacity above 50, 000 upto 75, 000 litres 540 cost of 75, 000 litres capacity 541 add for capacity above 75, 000 upto 1, 00, 000 litres 542 cost of 1, 00, 000 litres capacity 543 add for capacity above 1, 00, 000 upto 1, 50, 000 litres 544 cost of 1, 50, 000 litres capacity 545 add for capacity above 1, 50, 000 upto 2, 00, 000 litres 546 cost of 2, 00, 000 litres capacity 547 add for capacity above 2, 00, 000 upto 3, 00, 000 litres 548 cost of 3, 00, 000 litres capacity 549 add for capacity above 3, 00, 000 upto 5, 00, 000 litres 550 cost of 5, 00, 000 litres capacity 551 add for capacity above 5, 00, 000 upto 10, 00, 000 litres 552 cost of 10, 00, 000 litres capacity 553 addforcapacityabove10, 00, 000upto15, 00, 000 litres 554 cost of 15, 00, 000 litres capacity 555 add for capacity above 15, 00, 000 litres 556 note: 10% shall be added over the cost of gsr for sump where over head pump house is proposed. 557 m1032unconventionalwater treatment plant 558 designing ( aesthetically ) , providing and constructinghigh rate unconventionalwatertreatmentplant i.e. simplified water treatment plant consisting of civil works includingcostofprovidingandapplyingepoxypainttoinsidesurfaceofwaterretainingstructuresincontactwithchlorineandprovidinganti termitetreatmenttoentirestructurebelowgroundlevel, ceramic tiles for floring, acrylic emulsion with silicon additives paint from outside stainless steel railing, mechanicalandelectricalcomponentsofvarioussub worksasgivenbelow : includingnecessaryhydraulic testing, structuraltesting and trial for 3 months, etc. completeas directedbyengineer in charge ( turn key job ) works. 559 aeration fountain 560 inlet arrangements 561 mixing channel with ventury flume and flow measuring arrangement 562 inlet channel 563 flocculator conforming to i.s. 7208 1974 ( type c ) with detention period of 30 minutes 564 tube settlers designing, fabricating and constructing tube settlers with square or any other shaped tube like circular, cheveron, hexagonal etc .having proven performance 565 rapid sand gravity filters all valve shall be glandless. 566 filter house 567 chemical house 568 alum tanks 2nos. with mixing, carrying and dosing arrangements with piping. 569 100 kg chlorine cylender for capacity upto 5mld and chlorine tonner for capacity above 5 mld. 570 tcl solution tank with mixing, carrying and dosing arrangement with piping. 571 bypass arrangement 572 external and internal electrification 573 laboratory equipments 574 wash water tanks of capacity equal to12 minutes to wash specified number of filter beds at time at 600 lit / m2 / m under head of 12m at under drain. 575 wash water pumps with 100% standby 576 air blowers capable of delivering 600 lmp per square metre of free air of filter area at 0.4 kg / sqcm at the under drains ( 100 % standby ) .air blowers shall be adopted for wtp having capacity more than 3 mld only. below 3 mld capacity, air blowers shall not be adopted. 577 pure water sump of capacity equal to 1 hourpumping capacity. 578 pure water pump house over the sump / by the side of sump. 579 drainage arrangements 580 alum store 581 sanitary block with necessary water supply and drainage arrangements and internalwbm roads. 582 these rates are applicable for seismic zones 2, 3 and 4. 583 rates given below are inclusive of uplift pressure if any and dewatering during the entire work. 584 all rcc structures shall be constructed in m 250. structures in contact with water shall be in m 300. 585 unconventional treatment plants less than 1 mld capacity shall not be constructed. 586 all the structural steel works / fabrications are to be provided with application of hot dip zinc coating according to specification as per is 4759:1996 ( reafirmed 2006 ) . 587 note: conditions from sr. no. 1 to 28 shall form a part and parcel of the tender and must be included in draft tender papers for the work of unconventional treatment plants. 588 unconventional water treatment plant 589 fixed cost for 1 mld 590 add for capacity above 1 mld upto 2 mld 591 cost of 2 mld treatment plant 592 add for capacity above 2 mld upto 3 mld 593 cost of 3 mld treatment plant 594 m1033conventionalwater treatment plant 595 designing ( aesthetically ) , providingconstructingandcommissioningconventionalwatertreatmentplantconsistingofallcivil, mechanicalandelectricalworks includingcostofprovidingandapplyingepoxypainttoinsidesurfaceofwaterretainingstructuresincontactwithchlorineandprovidingantitermitetreatmenttoentirestructurebelowgroundlevel, mechanicalandelectricalcomponentsofvarioussub worksasgivenbelow, includingnecessaryhydraulic testing, structuraltesting, equipmenttestingandtrialrunfora periodof3 months, etc. completeas directedbyengineer in charge ( turn key job ) . 596 aeration fountain plan are a not less than 0.625 square metre per mld 597 ventury flume with necessary devices, consisting of simple mechanical indicator. ( pedestal type gauge ) 598 flash mixer rapid mixing device, detention time 60 seconds to give velocity gradient 300 to 400 sec 1, vane mixer type conforming to i.s. 7090 of 1985. 599 flocculator – conforming to i.s.7208 1974 ( type c ) with detention period of 30 minutes. 600 clarifier horizontal flow circular tank, detention period 2 5 hours, overflow rate 30 cubic metre per square metre per day ( to be specified ) , weir loading not more than 300 cubic metre per metre per day, with mechanical sludge scraper conforming to i.s. no. 10313 1982. 601 rapid sand filter sand filter house filter designed for filteration rate of 5, 000 litres per square metre per hour, minimum 2 beds for plant upto 10 mld, for larger plants as specified, filters to be located in filter house with roof slab, pipe gallery and platform minimum 5.5 metre in width. 602 filtersand effective size 0.45 to 0.70mm, uniformity coefficient not more than 1.7, nor less than 1.3, depth of water over sand 0.75m, free board 50cm, gravel 0.45m in depth, sand and gravel conforming to i.s. 8491 ( i ) 77, back wash by air wash, stand ard appurtenances ( to be specified ) , rate of flow controller, filter gauge, sand expansion gauge, etc. 603 wash water tank capacity to be specified and suitable to supply water to wash 2 filter units at a time where the units are 4 or more. 604 wash water pumps capacity to fill water tank in 1 hour with 100% standby. 605 air blowers capable of delivering 600 lmp per square metre of free air, of filter area at 0.4kg / sqcm at the under drains ( 100% standby ) . 606 chemical house in two storeys 607 ground floor to accommodate 7 days alum requirement and sundry storage. 608 first floor to accommodate alum and lime tanks.etc. 609 solution tanks minimum 3 tanks ( one for preparation, second for dosing and third as standby ) , each tank capable of giving 8 hours maximum dose without interruption, minimum free board 0.30m, trays for dissolving, level indicator, mechanical agitation devices, solution feed and drain lines, solution feed device ( constant head device, strength of solution upto 10% only ) conforming to i.s. 9222 part i 1979. 610 pure water sump and sump house. 611 capacity of sump – one hour of designed flow. 612 pump house pump house of required size over the sump or by the side. 613 store house suitable for alum storage of three months requirement in monsoon with 10% extra capacity for other sundry articles. 614 vacuum feed type chlorinators make tobe approved by mjp. 615 conforming to i.s. 10533 a part ii 1983 616 rate for withdrawal 617 temperature kg. of chlorine discharge degree c per day ( cylinders ) 618 45 67tonnes 619 10 6.359.50 110 620 15 10.75 16.10130 621 20 14.50 21.24254 622 27&above18.70 28.12315 623 chlorinator equipment and container room to conform to i.s. 10553 part i 1983. 624 100% standby shall be provided. 625 by pass arrangements c.i. or m.s. pipes. 626 disposal of waste from wtp: safe disposal arrangement to near by nala including cost of pipe 627 for wtp of capacity 30 mld and more additional arrangement for backwash water recycle shall be provided, including sump, pupming machinary, rising main etc complete 628 drainage arrangements – rcc pipes up to plot boundary. 629 electrical installation – both internal and external including entire plant area. 630 laboratory equipment –as per requirement ( to be specified during tendering ) . 631 sanitary blocks – carpet area 15 square metre minimum upto 25 mld and 25 square metre above 25 mld. 632 administrative block and internal road to accommodate office room, chlorine room, laboratory room, panel board room, blower room etc. and wbm road to connect all units from main gate of plot. 633 rates given below are inclusive of up lift pressure if any and dewatering during entire work. 634 all pipes condutes channels with20%overloading 635 these rates are applicable for seismic zones 2, 3 and 4. 636 all rcc structures shall be constructed in m 300. 637 note: conditions from sr. no. 1 to 22 shall form a part and parcel of the tender and must be incorporated in draft tender papers of conventional treatment plants ( proposed ) . 638 conventional water treatment plant 639 above3 mld to upto 5 mld 640 cost of 5 mld treatment plant 641 add for capacity above 5mld upto 10 mld 642 cost of 10 mld treatment plant 643 add for capacity above 10 mld upto20 mld 644 cost of 20 mld treatment plant 645 add for capacity above 20 mld upto 50 mld 646 cost of 50 mld treatment plant 647 add for capacityabove 50 mld upto 100 mld 648 cost of 100 mld treatment plant 649 add for capacity above 100 mld 650 m1034gpt / hygpt :drilling by rotary drill machine of size 300mm & 400mm dia with t.c. drill bit for tubewells in all kinds of soil including moorum, hard soil, soil mixed with pebbles, shingles, compacted soil, clay, soft and decomposed rock etc, up to 60 meters depth including reaming to facilitate smooth lowering of casing pipe etc. as per specification and direction of e / i ( basic rates ) 651 300 mm dia for gpt 652 400 mm dia for hygpt 653 m1035hydt : cost of drilling 200 mm x 165 mm x 125 meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic dth rig machine, all complete including supplying all materials, tools, drilling rig, air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicles up to the site ( basic rates ) 654 from 0 50 meter 655 from 51 125 meter 656 m1037dt :basic rates for 125 / 115 mm dia drilled tube well for drilling in all kinds of soil and rock for installation of hand pump with dth rig machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125 / 115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and dirrection of engineer incharge ( basic rates ) 657 drillig upto 30 mtr depth below g. l. in rural area 658 drilling beyond 31 mtr upto 60 mtr below g. l. in rural area 659 m1038trenchless 660 installation of product pipe by manual pipe jacking method including making of entry and exit pits all related civil works like excavation , shoring / strutting etc manual shielded excation , lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 661 from 900 mm to 1000 mm dia 662 in soft soil 663 in hard soil 664 in sandy soil 665 in stone soil 666 from 1000 mm to 1200 mm dia 667 in soft soil 668 in hard soil 669 in sandy soil 670 in stone soil 671 above 1200 mm to 1500 mm dia 672 in soft soil 673 in hard soil 674 in sandy soil 675 in stone soil 676 installation of product pipe by auger boring methodincluding making of entry and exit pits all related civil works like excavation , shoring / strutting etc shielded excavation , through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 677 upto 300 mm dia 678 in soft soil 679 in hard soil 680 in sandy soil 681 in stone soil 682 above300 mm to 450 mm dia 683 in soft soil 684 in hard soil 685 in sandy soil 686 in stone soil 687 above 450 mm to 600 mm dia 688 in soft soil 689 in hard soil 690 in sandy soil 691 in stone soil 692 above 600 mm to 900 mm dia 693 in soft soil 694 in hard soil 695 in sandy soil 696 in stone soil 697 installation of product pipe by guided auger boring methodincluding making of entry and exit pits all related civil works like excavation , shoring / strutting etc shielded excavation , through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 698 upto 300 mm dia 699 in soft soil 700 in hard soil 701 in sandy soil 702 in stone soil 703 above300 mm to 450 mm dia 704 in soft soil 705 in hard soil 706 in sandy soil 707 in stone soil 708 above 450 mm to 600 mm dia 709 in soft soil 710 in hard soil 711 in sandy soil 712 in stone soil 713 above 600 mm to 900 mm dia 714 in soft soil 715 in hard soil 716 in sandy soil 717 in stone soil 718 m1039providing and supplying isi mark ci / d / f reflux valves ( non return valves ) of following dia inspection charges unloading from railway wagon , loading into truck transportation upto department stores / site unloading stacking etc. complete reflux valve as per is 5312 part i ( 1984 ) 719 without byepass arrangement pn 1 720 50 mm 721 65 mm 722 80 mm 723 100 mm 724 125 mm 725 150 mm 726 200 mm 727 250 mm 728 300 mm 729 350 mm 730 400 mm 731 450 mm 732 500 mm 733 600 mm 734 700 mm 735 750 mm 736 800 mm 737 900 mm 738 1000 mm 739 1100 mm 740 1200 mm 741 with byepass arrangement pn 1 742 50 mm 743 65 mm 744 80 mm 745 100 mm 746 125 mm 747 150 mm 748 200 mm 749 250 mm 750 300 mm 751 350 mm 752 400 mm 753 450 mm 754 500 mm 755 600 mm 756 700 mm 757 750 mm 758 800 mm 759 900 mm 760 1000 mm 761 1100 mm 762 1200 mm 763 without byepass arrangement pn 1.6 764 50 mm 765 65 mm 766 80 mm 767 100 mm 768 125 mm 769 150 mm 770 200 mm 771 250 mm 772 300 mm 773 350 mm 774 400 mm 775 450 mm 776 500 mm 777 600 mm 778 with byepass arrangement pn 1.6 779 50 mm 780 65 mm 781 80 mm 782 100 mm 783 125 mm 784 150 mm 785 200 mm 786 250 mm 787 300 mm 788 350 mm 789 400 mm 790 450 mm 791 500 mm 792 600 mm 793 providing double flange sluice valve ( size 50 mm to 1200 mm ) confirming for is 2906 / 14846 including worn gear arrangements as per test pressure stailess steel spindle , caps transportation etc. all complete . 794 with byepass arrangement pn 1 795 50 mm 796 65 mm 797 80 mm 798 100 mm 799 125 mm 800 150 mm 801 200 mm 802 250 mm 803 300 mm 804 350 mm 805 400 mm 806 450 mm 807 500 mm 808 600 mm 809 700mm 810 750 mm 811 800 mm 812 900 mm 813 1000 mm 814 1100 mm 815 1200mm 816 without byepass arrangement pn 1 817 50 mm 818 65 mm 819 80 mm 820 100 mm 821 125 mm 822 150 mm 823 200 mm 824 250 mm 825 300 mm 826 350 mm 827 400 mm 828 450 mm 829 500 mm 830 600 mm 831 700mm 832 750 mm 833 800 mm 834 900 mm 835 1000 mm 836 1100 mm 837 1200mm 838 providing double flange sluice valve confirming for is 2906 / 14846 including worn gearas per test pressure stailess steel spindle , caps transportation etc. all complete for rateincluding all taxes . . 839 without byepass arrangement pn 1.6 840 50 mm 841 65 mm 842 80 mm 843 100 mm 844 125 mm 845 150 mm 846 200 mm 847 250 mm 848 300 mm 849 350 mm 850 400 mm 851 450 mm 852 500 mm 853 600 mm 854 700mm 855 750 mm 856 800 mm 857 900 mm 858 1000 mm 859 1100 mm 860 1200mm 861 with byepass arrangement pn 1.6 862 50 mm 863 65 mm 864 80 mm 865 100 mm 866 125 mm 867 150 mm 868 200 mm 869 250 mm 870 300 mm 871 350 mm 872 400 mm 873 450 mm 874 500 mm 875 600 mm 876 m1040design and supply of v wire screen laterals suitable for infiltration galleryas per site condition and detail provided end connection suitable flange excluding taxes and transportation . 877 dia 06 inch ( 150 mm ) 878 id 153 mm od 167 mm 879 screen thickness 07 mm 880 slot 1.00 mm 881 moc lowcarbon galvenised steel 882 length 5 mtr. 883 dia 08 inch ( 200 mm ) 884 id 205 mm od 221mm 885 screen thickness 08 mm 886 slot 1.00 mm 887 moc lowcarbon galvenised steel 888 length 5 mtr. 889 dia 10 inch ( 250 mm ) 890 id 256 mm od 276mm 891 screen thickness 10 mm 892 slot 1.00 mm 893 moc lowcarbon galvenised steel 894 length 5 mtr. 895 dia 12 inch ( 300 mm ) 896 id 306 mm od 326 mm 897 screen thickness 10 mm 898 slot 1.00 mm 899 moc lowcarbon galvenised steel 900 length 5 mtr. 901 dia 14 inch ( 350 mm ) 902 id 338 mm od 363 mm 903 screen thickness 12.5 mm 904 slot 1.00 mm 905 moc lowcarbon galvenised steel 906 length 5 mtr. 907 m1041supplying all materials, labours, equipments for lowering 125mm dia blue upvc casing pipe as casing for protecting the sides from falling during the process of drilling all complete including carriage of materials to work site ( basic rate ) . 908 m1042supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per dirction e / i ( basic rate ) . 909 m1043supplying labour cement and calcium chloride or bentonite solution and equipments for grouting the casing pipe after lowering in the bore including carriage of materials to work site etc. all complete as per specification & direction of e / i ( basic rate ) . 910 m1044supplying labour and equipments including 125mm dia g.i. cap and fitting and fixing over the casing pipe of tube well properly and taking it out as per direction e / i ( the cap will be the property of department ) ( basic rate ) . 911 m1045supplying all materials, labours, equipments for constructing p.c.c. ( 1:2:4 ) circular platform around drilled tube well including 12mm thick cement plaster ( 1:4 ) with neat cement punning over exposed surface as per unicef design, etc. all complete including carriage of materials ( basic rate ) . 912 m1046supplying all materials, labours and equipments for constructing p.c.c. ( 1:2:4 ) drain as per unicef design etc. all complete including carriage of materials ( basic rate ) . 913 m1047supplying extra deep well hand pump complete sets with cylinder assembly & connecting rod ( 12 pcs ) as per is : 15500 part 2 / 2004 ( basic rate ) . 914 m1048supply of 200mm dia x 3.00m long upvc casing pipe conferming to is : 12818: 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . 915 m1049supply of 200mm dia ribbed screen pipe conferming tois : 12818: 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . 916 m1050supply of 125mm dia ribbed screen pipe conferming tois : 12818: 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . 917 m1051supplying all tools, equipments and labour and lowering 32 mm dia medium quality g.i. pipe in drilled tube well in 3 mtrs. length all complete as per dirction e / i including carriage of materials ( basic rate ) . 918 m1052supplying all tools, labour for fitting and fixing deep well cylinder with necessary connecting rod complete job as per specification & direction of e / i including carriage of materials ( basic rate ) . 919 m1053supplying all materials, labours and fixing india mark ii hand pump with all accessories all complete job as per direction of e / i including carriage of materials ( basic rate ) . 920 m1054design, supply, installation testing & commissioning of packaged water treatment plants ( unconventional type ) of different capacity with ( 20 hours operation ) comprising of lamella clarifier, static mixture flocculation tank ( smet ) , multi grade filter ( mgf ) with best quality filter media, lime / coagulant / polymer dosing system hypo chloride dosing system, raw water feed pump / clear water transfer pump ( either or ) , sludge transfer cum recirculation pump, filter feed pump & back wash pump including all fitting like valve and other special fittings and electrical power supply to the different supplied units with mcb panel internal electrification with lighting arrangement with treatment plant site with provision of chemical storage and water testing boratoryfacility should be from a reputed manufacturer / authorized distribution / authorized dealer conforming to relevant is codes and certified by iso 9001 2008 & 14001, it also include cost of civil foundation, including clarified water tank internal connecting pipe line from raw water inlet to cwr and applying internal epoxy paint on the supply equipment all the prices are exclusive of gst, allied structure / items which are site specific such as external electrification, approach road, foot bridge, cofferdam, compound wall, scada and automation, cwr pumps etc are to be considered extra. 921 0.2 mld 922 0.3 mld 923 0.4 mld 924 0.5 mld 925 0.6 mld 926 m1055pumps 927 supplying100 mm dia submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene / noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single / double run shall be provided with each pump. 928 submersible pump set 100 mm dia ( with polypropylene / noryl impeller ) up to 20 stages 929 1 h.p. 930 1.5hp 931 2 hp 932 2.5 hp 933 3.0 hp 934 4.0 hp 935 5.0 hp 936 supply rate should be increased by rs 200 / per stage for pump with more than 20 stages 937 submersible pump 150 mm dia ( with bronze impeller ) up to 8 stages 938 1.5 hp 939 2.0 hp 940 3.0 hp 941 4.0 hp 942 5.0 hp 943 6.0 hp 944 7.5 hp 945 supply rate should be increased by rs 600 / per stage for pump with more than 8 stages 946 submersible pump 150 mm dia ( with bronze impeller ) up to 12 stages 947 8.0 hp 948 9.0 hp 949 10.0 hp 950 11.0 hp 951 12.5 hp 952 15.0 hp 953 supply rate should be increased by rs 600 / per stage for pump with more than 12 stages 954 submersible pump 150 mm dia ( with bronze impeller ) up to 20 stages 955 17.5 hp 956 20.0 hp 957 25 hp 958 1 ) supply rate should be increased by rs 600 / per stage for pump with more than 20 stages for bore well only. 959 for other use 200 mm dia pump shall be preferred over 150 mm dia with more than 20 stage pump. 960 2 ) for 150 mm dia energy efficient pumps add as below 961 a. up to 8 stages : 3% on supply rate 962 b. up to 12 stages : 4% on supply rate 963 c. up to 15 stages : 5% on supply rate 964 m1056pressure gauge 965 providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint 966 pressure gauge ( 100 mm dia ) 967 pressure gauge ( 150 mm dia ) 968 vacuum / combination gauge 969 supplyingvacuum gauge / combination gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia g.i. pipe. 970 vacuum / combination gauge – 100 mm dia 971 vacuum / combination gauge – 150 mm dia 972 m1057lifting equipment 973 chain pulley block 974 supplyingtriple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark. 975 1 tonne capacity 976 2 tonne capacity 977 3 tonne capacity 978 hand operated circular or rectangular travelling crane ( single girder ) 979 supplyingsingle girder hand operated circular / rectangular travelling crane with 6 m lift complete with chain pulley block isi marked and travelling trolley both tested for 50% overload including arrangement for longitudinal travel / circular travel and cross travel with wheel, hand chain, etc complete. 980 3 tonne capacity 981 up to 5 m span 982 above 5 m up to 6 m span 983 above 6 m up to 8 m span 984 5 tonne capacity 985 up to 5 m span 986 above 5 m up to 6 m span 987 above 6 m up to 8 m span 988 above 8 m up to 10 m span 989 electric operated circular or rectangular travelling crane ( single girder ) 990 supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block. 991 5 tonne capacity 992 above 6 m up to 8 m span 993 above 8 m up to 10 m span 994 7.5 tonne capacity 995 above 6 m upto 8 m span 996 above 8 m up to 10 m span 997 10 tonne capacity 998 above 6 m up to 8 m span 999 above 8 m up to 10 m span 1000 square bar / rail 1001 providing, erecting and fixing square bar of en 8 as rail for over head crane on provided track, girder / continuous corbel beam, including supporting plate and “j” bolts. 1002 50 x 50 mm ( en 8 ) 1003 40 x 40 mm ( en 8 ) 1004 m1058lightening arrester, ab switch, insulators 1005 lightening arrestor 1006 supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line. 1007 suitable for 11 kv supply, distribution class 1008 suitable for 22 kv supply, distribution class 1009 suitable for 33 kv supply, station class 1010 disc insulator 1011 supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm 1012 suitable for 11kv line 1013 suitable for 33kv line 1014 pin insulator 1015 supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm 1016 suitable for 11kv line 1017 suitable for 33kv line 1018 air break switch without earth switch 1019 supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps 1020 suitable for 11kv line 1021 rocking / tilting type 1022 rotating type 1023 suitable for 33kv line 1024 rocking / tilting type 1025 rotating type 1026 air break switch with earth switch 1027 supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps 1028 suitable for 11kv line 1029 rotating type 1030 suitable for 33kv line 1031 rotating type 1032 drop out fuse ( channel mounted ) 1033 supplying, erecting approved make out door type drop out fuse channel type with insulator complete with fuse holders fuse barrel with metal fittings, fuse element, with working currentup to 50 amp, capacity completeerected on provided cross arm, each set comprising 3 units 1034 suitable for 11 kv line 1035 suitable for 33 kv line 1036 horn gap fuse ( channel mounted ) 1037 supplying, erecting approved make out door type horn gap type fuse with insulator, fuse element, with working current up to 50 amp, capacity complete erected on provided cross arm, each set comprising 3 units 1038 suitable for 11 kv line 1039 suitable for 33 kv line 1040 m1059transformer 1041 power transformer ( with off load tap changer ) any isi mark 1042 supplyingoutdoor type copper wound transformer continuously rated for 3ph, 50 hz, at full load and temp. rise not exceeding 450 c by thermometer in oil and 500 c by theresistance in winding after continuous run at full load rating, thetransformer should have oil immersed winding having vector group dy11, ht side connected in delta and lt side connected in star with neutral brought out connected to provideseparateearthing. the transformer shall have power terminal arrangement, bushing / cable end box on ht side and cable end box on lt side. 2 nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. the transformer should have following standard fittings. transformer shall be latest manufacturing standards as per amended is specifications and the load & no load losses shall be limited to the values given below or as per is or norms issued by seb which ever are lower 1043 1. oil conservator with filling hole with cap and plain oil level gauge. 1044 2. silica gel dehydrating breather charged with silica gel. 1045 3. oil drain valve 1046 4. oil filter valve 1047 5. lifting eyes / hooks 1048 6. two earthing terminals 1049 7. diagram and rating plate 1050 8. air vent 1051 9. explosion vent 1052 10. 100mm dia thermo meter with thermometer pocket 1053 11. four bi directional plain roller. 1054 power transformer 11000 / 433 volts with off load tap changer – 12.5% to +2.5% in steps of 2.5% as per bis level 2. 1055 63 kva ( no load loss 180w and load loss 1235w ) 1056 100 kva ( no load loss 260w and load loss 1760w ) 1057 160kva ( no load loss 260w and load loss 1760w ) 1058 200kva ( no load loss 500w and load loss3000w ) 1059 250kvaa ( no load loss 550w and load loss3600w ) 1060 315kva ( no load loss 580w and load loss 4200w ) 1061 400 kva ( no load loss 715w and load loss 5000w ) 1062 500 kva ( no load loss 850w and load loss 5800w ) 1063 630 kva ( no load loss 1000w and load loss 7000w ) 1064 750 kva ( no load loss 1500w and load loss 8000w ) 1065 power transformer ( with on load tap changer ) 1066 supplyingoutdoor type copper wound transformer continuously rated for 3ph, 50 hz, at full load and temp. rise not exceeding 450 c by thermometer in oil and 500 c by theresistance in winding after continuous run at full load rating, thetransformer should have oil immersed winding having vector group dy11, ht side connected in delta and lt side connected in star with neutral brought out connected to provideseparateearthing. the transformer shall have power terminal arrangement, bushing / cable end box on ht side and cable end box on lt side. 2nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. the transformer should have following standard fittings. the oltc should be suitable for minimum 50 operations per day. transformer shall be latest manufacturing standards as per amended is specifications and the load & no load losses shall be limited to the values given below or as per is or norms issued by seb which ever are lower 1067 1. oil conservator with filling hole with cap and plain oil level gauge. 1068 2. silica gel dehydrating breather charged with silica gel. 1069 3. oil drain valve 1070 4. oil filter valve 1071 5. lifting eyes / hooks 1072 6. two earthing terminals 1073 7. diagram and rating plate 1074 8. air vent 1075 9. explosion vent 1076 10. 100mm dia thermo meter with thermometer pocket 1077 11. four bi directional plain roller. 1078 12. buchholz relay 1079 13. resistance temp. detector 1080 14. marshalling box 1081 15. automatic voltage regulator ( avr ) 1082 16. remote tap changing controller ( rtcc ) 1083 transformer 11000 / 433 volts withon load tap changer – 15% to +5% in steps of 1.25% with rtcc, avr and marshalling box and other specification as per bis level 2. 1084 750 kva 1085 1000 kva 1086 1250 kva 1087 1600 kva 1088 2000 kva 1089 m1060motors 1090 foot mounted motors tefc 1500 rpm 1091 supplyingfoot mounted tefc 1500 rpm, squirrel cage induction motor, conforming to is 325 having continuous rating suitable for operation at 415 volts + / 10%, 3 phase, 50 hz + / 3% with “f” class insulation temperature rise limited to class “b” insulation. motors conform to is 12615 with efficiency level ie3 and provided with enclosure protection class ip 55. 1092 15 kw ( 20 hp ) 1093 18.5 kw ( 25 hp ) 1094 22 kw ( 30 hp ) 1095 30 kw ( 40 hp ) 1096 37 kw ( 50 hp ) 1097 45 kw ( 60 hp ) 1098 55 kw ( 75 hp ) 1099 75 kw ( 100 hp ) 1100 90 kw ( 120 hp ) 1101 110 kw ( 150 hp ) 1102 132kw ( 180hp ) 1103 160kw ( 215 hp ) 1104 250kw ( 335 hp ) 1105 foot mounted motor tefc 1500 rpm 1106 0.75 kw ( 1hp ) 1107 1.1 kw ( 1.5 hp ) 1108 1.5 kw ( 2 hp ) 1109 2.2 kw ( 3 hp ) 1110 3.7 kw ( 5 hp ) 1111 5.5 kw ( 7.5 hp ) 1112 7.5 kw ( 10 hp ) 1113 9.3 kw ( 12.5 hp ) 1114 11 kw ( 15 hp ) 1115 m1061aluminium cable 1116 cable 1117 aluminium conductor three core, xlpe / pvc insulated & armoured cable . 1118 supplyingxlpe / pvc insulated, armoured cable 1100 v grade with isi mark three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1119 3 core 2.5 sq mm 1120 3 core 4 sq mm 1121 3 core 6 sq mm 1122 3 core 10 sq mm 1123 3 core 16 sq mm 1124 3 core 25 sq mm 1125 3 core 35 sq mm 1126 3 core 50 sq mm 1127 3 core 70 sq mm 1128 3 core 95 sq mm 1129 3 core 120 sq mm 1130 3 core 150 sq mm 1131 3 core 185 sq mm 1132 3 core 240 sq mm 1133 3 core 300 sq mm 1134 3 core 400 sq mm 1135 aluminium conductor 3.5 core, xlpe / pvc insulated & unarmoured cable 1136 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three and half core, stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, completein an approved manner. 1137 3.5 core 25 sq mm 1138 3.5 core 35 sq mm 1139 3.5 core 50 sq mm 1140 3.5 core 70 sq mm 1141 3.5 core 95 sq mm 1142 3.5 core 120 sq mm 1143 3.5 core 150 sq mm 1144 3.5 core 185 sq mm 1145 3.5 core 240 sq mm 1146 3.5 core 300 sq mm 1147 3.5 core 400 sq mm 1148 ht aluminium three core 3.3 kve cable xlpe insulated 1149 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1150 3 core 35 sq mm 1151 3 core 50 sq mm 1152 3 core 70 sq mm 1153 3 core 95 sq mm 1154 3 core 120 sq mm 1155 3 core150sq mm 1156 3 core 185 sq mm 1157 3 core 240sq mm 1158 3 core 300 sq mm 1159 3 core 400 sq mm 1160 ht aluminium three core 6.6 kv ( ue ) / 11kv ecable xlpe insulated 1161 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1162 3 core 35 sq mm 1163 3 core 50 sq mm 1164 3 core 70 sq mm 1165 3 core 95 sq mm 1166 3 core 120 sq mm 1167 3 core150sq mm 1168 3 core 185 sq mm 1169 3 core 240sq mm 1170 3 core 300 sq mm 1171 3 core 400 sq mm 1172 ht aluminium three core 11kv ( ue ) cable xlpe insulated 1173 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1174 3 core 35 sq mm 1175 3 core 50 sq mm 1176 3 core 70 sq mm 1177 3 core 95 sq mm 1178 3 core 120 sq mm 1179 3 core150sq mm 1180 3 core 185 sq mm 1181 3 core 240sq mm 1182 3 core 300 sq mm 1183 3 core 400 sq mm 1184 aluminium conductor three core, xlpe / pvc insulated & unarmoured cable . 1185 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1186 3 core 4 sq mm 1187 3 core 6 sq mm 1188 3 core 10 sq mm 1189 3 core 16 sq mm 1190 3 core 25 sq mm 1191 3 core 35 sq mm 1192 3 core 50 sq mm 1193 3 core 70 sq mm 1194 3 core 95 sq mm 1195 3 core 120 sq mm 1196 3 core 150 sq mm 1197 3 core 185 sq mm 1198 3 core 240 sq mm 1199 3 core 300 sq mm 1200 3 core 400 sq mm 1201 m1062copper cable 1202 cable 1203 3 core pvc insulated, pvc sheathed copper conductor flat submersible cable . 1204 supplying , flat flexible submersible cable with, copper conductor, pvc insulated, and pvc sheathed . 1205 3 core 1.5 sq mm 1206 3 core 2.5 sq mm 1207 3 core 4 sq mm 1208 3 core 6 sq mm 1209 3 core 10 sq mm 1210 3 core 16 sq mm 1211 3 core 25 sq mm 1212 3 core 35 sq mm 1213 copper conductor three core, xlpe / pvc insulated & unarmoured cable . 1214 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1215 3 core 1.5 sq mm 1216 3 core 2.5 sq mm 1217 3 core 4 sq mm 1218 3 core 6 sq mm 1219 3 core 10 sq mm 1220 3 core 16 sq mm 1221 3 core 25 sq mm 1222 3 core 35 sq mm 1223 3 core 50 sq mm 1224 3 core 70 sq mm 1225 3 core 95 sq mm 1226 copper conductor 3.5 core, xlpe / pvc insulated & armoured cable . 1227 supplyingxlpe / pvc insulated, armoured cable 1100 v grade with isi mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, completein an approved manner. 1228 3.5 core 1.5 sq mm 1229 3.5 core 2.5 sq mm 1230 3.5 core 4 sq mm 1231 3.5 core 6 sq mm 1232 3.5 core 10 sq mm 1233 3.5 core 16 sq mm 1234 3.5 core 25 sq mm 1235 3.5 core 35 sq mm 1236 3.5 core 50 sq mm 1237 3 .5 core 70 sq mm 1238 3.5 core 95 sq mm 1239 3.5 core 120 sq mm 1240 3 .5 core150sq mm 1241 3.5 core 185 sq mm 1242 3.5 core 240sq mm 1243 3.5 core 300 sq mm 1244 3.5 core 400 sq mm 1245 copper conductor 3.5 core xlpe / pvcunarmoured 1246 supplyingxlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1247 3.5core 25 sq mm 1248 3.5core 35 sq mm 1249 3.5 core 50 sq mm 1250 3.5 core 70 sq mm 1251 3.5 core 95 sq mm 1252 3.5 core 120 sq mm 1253 3.5 core150sq mm 1254 3.5 core 185 sq mm 1255 3.5 core 240sq mm 1256 3.5 core 300 sq mm 1257 3.5 core 400 sq mm 1258 copper conductor three core, xlpe / pvc insulated & armoured cable . 1259 supplyingxlpe / pvc insulated, armoured cable 1100 v grade with isi mark three core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1260 3 core 1.5 sq mm 1261 3 core 2.5 sq mm 1262 3 core 4 sq mm 1263 3 core 6 sq mm 1264 3 core 10 sq mm 1265 3 core 16 sq mm 1266 3 core 25 sq mm 1267 3 core 35 sq mm 1268 3 core 50 sq mm 1269 3 core 70 sq mm 1270 3 core 95 sq mm 1271 3 core 120 sq mm 1272 3 core 150sq mm 1273 3core 185 sq mm 1274 3 core 240 sq mm 1275 3 core 300 sq mm 1276 3 core 400 sq mm 1277 m1063foot valve 1278 foot valve 1279 supplying c.i. foot valve having single leather flap and gunmetal seating. valve shall be fixed on suction side of pump as per requirement including jointing material and hardware. 1280 flanged type 1281 50 mm 1282 65 mm 1283 80 mm 1284 100 mm 1285 125 mm 1286 150 mm 1287 m1064aircircuit breaker 1288 acbbreaking capacity 50ka thermal magnetic manual draw out type 3 pole 1289 630a 1290 800a 1291 1000a 1292 1250a 1293 1600a 1294 2000a 1295 m1065starter 1296 d.o.l. starter with ss enclosure with 380 / 415 volt coil 1297 7.5 h.p. 1298 10 h.p. 1299 supplyingfully automatic star delta starter to operate induction motor working on415v, 3phase, 50 hz with no volt coil, over load element, on off push buttons, with necessary materials and connected to supply, etc complete starter with original sheet steel encloser 1300 f.a.s.d starter 1301 10.0 h.p. 1302 15 h.p. 1303 20 h.p. 1304 25 h.p. 1305 35 h.p. 1306 40 hp 1307 50 hp 1308 75 h.p. 1309 100 h.p. 1310 125 h.p. 1311 150 h.p. 1312 250 h.p. 1313 m1066servo controlled automatic voltage stabilizer 1314 providing, erecting servo controlled automatic voltage stabiliser suitable for out put voltage of 415 volt + / 1%, 3 ph, 50 hz, with copper wound transformer ( air / oil cooled ) as mentioned below. the stabilizer shall function satisfactorily even if incoming supply is unbalanced between phases within range of 10%. the stabilizer should be constructed in cubical box, with bidirectional wheels for easy handling, necessary monitors and users controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and out put voltage, auto / manual selector switch, raise / low push buttons etc. suitable capacity termination strips and bus bars for incoming and out going cable should be provided. all three phases shall be independently monitored and corrected. following protections and indications shall be incorporated?? over voltage / under voltage?? single phasing?? cut off contactor with electronic output sensing unit 1315 servo controlled automatic voltage stabiliser ( out put 415 + / 1% ) input 150 to 450 volt 1316 20 kva air cooled 1317 25 kva air cooled 1318 30 kva air cooled 1319 40 kva air cooled 1320 50 kva oil cooled 1321 60 kva oil cooled 1322 75 kva oil cooled 1323 100 kva oil cooled 1324 125 kva oil cooled 1325 servo controlled automatic voltage stabiliser ( out put 415 + / 1% ) input 280 to 460 volt 1326 15 kva air cooled 1327 20 kva air cooled 1328 25 kva air cooled 1329 30 kva air cooled 1330 40 kva air cooled 1331 50kva air cooled 1332 60 kva oil cooled 1333 75kva oil cooled 1334 100 kva oil cooled 1335 125 kva oil cooled 1336 150 kva oil cooled 1337 200kva oil cooled 1338 250kva oil cooled 1339 300 kva oil cooled 1340 400 kva oil cooled 1341 m1067termination kit 1342 providing and errecting in door type termination kit, for 3.3kv / 6.6 kv / 11kv / 22kv / 33kv xlpe screened 3 core cable 1343 in door termination kit for 3.3kv ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1344 25 50 mm2 1345 70 120 mm2 1346 150 185 mm2 1347 240 400 mm2 1348 out door termination kit for 3.3 ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1349 25 50 mm2 1350 70 120 mm2 1351 150 185 mm2 1352 240 400 mm2 1353 straight through joint for 3.3kv ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1354 25 50 mm2 1355 70 120 mm2 1356 150 185 mm2 1357 240 300 mm2 1358 in door termination kit for 11kv ( e ) xlpe screened 3 core cable 1359 25 50 mm2 1360 70 120 mm2 1361 150 185 mm2 1362 240 400 mm2 1363 out door termination kit for 11kv ( e ) xlpe screened 3 core cable 1364 25 50 mm2 1365 70 120 mm2 1366 150 185 mm2 1367 240 400 mm2 1368 straight through joint for 11 kv ( e ) xlpe screened 3 core cable 1369 25 50 mm2 1370 70 120 mm2 1371 150 185 mm2 1372 240 300 mm2 1373 in door termination kit for 22kv ( e ) xlpe screened 3 core cable 1374 25 50 mm2 1375 70 120 mm2 1376 150 185 mm2 1377 240 400 mm2 1378 out door termination kit for 22kv ( e ) xlpe screened 3 core cable 1379 25 50 mm2 1380 70 120 mm2 1381 150 185 mm2 1382 240 400 mm2 1383 straight through joint for 22 kv ( e ) xlpe screened 3 core cable 1384 25 50 mm2 1385 70 95 mm2 1386 120 150 mm2 1387 185 240 mm2 1388 300 400 mm2 1389 in door termination kit for 33kv ( e ) xlpe screened 3 core cable 1390 25 50 mm2 1391 70 95 mm2 1392 120 185 mm2 1393 240 400 mm2 1394 out door termination kit for 33 kv ( e ) xlpe screened 3 core cable 1395 25 50 mm2 1396 70 95 mm2 1397 120 185 mm2 1398 240 400 mm2 1399 straight through joint for 33 kv ( e ) xlpe screened 3 core cable 1400 35 70 mm2 1401 95 150 mm2 1402 185 300 mm2 1403 400 mm2...

Drinking Water And Sanitation Department - Jharkhand

31961000 government of jharkhand through its public works department ( pwd ) is engaged in framing / revision of schedule of rates and as part of this endeavor, quotations through e tender are invited supply of respective items 1 polythene water storage tank of mark ( e.g sintex / sinter / himgiri / gangotietc ) with cover and locking system 2 hdpe pipes 75mm dia 3 hdpe pipes 90mm dia 4 gi pipe 50 mm dia ( tata or equivalent make ) 5 jute 6 g.m. ferrules 7 ( i ) 8 mm dia wt. not less than 400 gms 8 ( ii ) 10 mm dia wt. not less than 400 gms 9 ( iii ) 15 mm dia wt. not less than 400 gms 10 ( iv ) 20 mm dia wt. not less than 600 gms 11 ( v ) 25 mm dia wt. not less than 900 gms 12 stop cocks 13 ( i ) 15 mm brass stop cock wt. not less than 300 gms 14 ( ii ) 20 mm brass stop cock wt. not less than 400 gms 15 ( iii ) 25 mm brass stop cock wt. not less than 575 gms 16 ( iv ) 32 mm brass stop cock wt. not less than 850 gms 17 ( v ) 40 mm brass stop cock wt. not less than 1.15 kg 18 ( vi ) 50 mm brass stop cock wt. not less than 2.15 kg 19 ( vii ) 15 mm dia c.i. body brass working part stop cock. 20 ( viii ) 20 mm dia c.i. body brass working part stop cock. 21 ( ix ) 25 mm dia c.i. body brass working part stop cock. 22 g.m. full way valve 23 ( i ) 15 mm dia wt. not less than 300 gms without wheel 24 ( ii ) 20 mm dia wt. not less than 400 gms without wheel 25 ( iii ) 25 mm dia wt. not less than 500 gms without wheel 26 ( iv ) 32 mm dia wt. not less than 700 gms without wheel 27 ( v ) 40 mm dia wt. not less than 1.0 kg without wheel 28 ( vi ) 50 mm dia wt. not less than 1.4 kg without wheel 29 ( vii ) 65 mm dia wt. not less than 1.8 kg without wheel 30 ( viii ) 80 mm dia wt. not less than 2.5 kg without wheel 31 g.m. non return valve verticle 32 ( i ) 15 mm dia wt. not less than 150 gms 33 ( ii ) 20 mm dia wt. not less than 250 gms 34 ( iii ) 25 mm dia wt. not less than 375 gms 35 ( iv ) 32 mm dia wt. not less than 600 gms 36 ( v ) 40 mm dia wt. not less than 700 gms 37 ( vi ) 50 mm dia wt. not less than 1.0 kg 38 ( vii ) 65 mm dia wt. not less than 1.20 kg 39 ( viii ) 80 mm dia wt. not less than 1.50 kg 40 ( ix ) 100 mm dia wt. not less than 1.80 kg 41 g.m. non return valve horizontal 42 ( i ) 15 mm dia wt. not less than 150 gms 43 ( ii ) 20 mm dia wt. not less than 250 gms 44 ( iii ) 25 mm dia wt. not less than 375 gms 45 ( iv ) 32 mm dia wt. not less than 600 gms 46 ( v ) 40 mm dia wt. not less than 700 gms 47 ( vi ) 50 mm dia wt. not less than 1.0 kg 48 ( vii ) 65 mm dia wt. not less than 1.20 kg 49 ( viii ) 80 mm dia wt. not less than 1.50 kg 50 ( ix ) 100 mm dia wt. not less than 1.80 kg 51 cocks 52 ( i ) 15 mm dia g.m. bib cock wt. not less than 300 gms 53 ( ii ) 15 mm dia brass bib cock wt. not less than 400 gms 54 ( iii ) 15 mm dia c.i. bib cock wt. not less than 400 gms 55 ( iv ) 15 mm dia c.i. body brass working part spray painted bib cock wt. not less than 400 gms 56 ( v ) 15 mm dia c.i. brass pillar cock cock wt. not less than 400 gms 57 ( vi ) 15 mm c.i. plug cock ordinary 58 ( vii ) 15 mm c.i. push cock ordinary 59 chromium plated brass fittings 60 ( i ) c.p. shower rose 100 mm dia 61 ( ii ) c.p. shower rose 125 mm dia 62 ( iii ) p.v.c. shower rose 150 mm dia 63 ( iv ) p.v.c shower rose 125 mm dia 64 connection pipe 65 ( i ) 15 mm dia x 30 cm. long lead connection pipe with brass fittings. 66 ( ii ) 15 mm dia x 45 cm. long lead connection pipe with brass fittings. 67 ( iii ) 15 mm dia x 30 cm. long pvc connection pipe with brass fittings. 68 ( iv ) 15 mm dia x 45 cm. long pvc connection pipe with brass fittings. 69 g.i. fittings ( conforming to i.s. 1879 ) isi marked 70 [ a ] g.i. bend 71 ( i ) 15 mm 72 ( ii ) 20 mm 73 ( iii ) 25 mm 74 ( iv ) 32 mm 75 ( v ) 40 mm 76 ( vi ) 50 mm 77 ( vii ) 65 mm 78 ( viii ) 80 mm 79 ( ix ) 100 mm 80 ( x ) 125 mm 81 ( xi ) 150 mm 82 [ b ] elbow of the following sizes 83 ( i ) 15 mm 84 ( ii ) 20 mm 85 ( iii ) 25 mm 86 ( iv ) 32 mm 87 ( v ) 40 mm 88 ( vi ) 50 mm 89 ( vii ) 65 mm 90 ( viii ) 80 mm 91 ( ix ) 100 mm 92 ( x ) 125 mm 93 ( xi ) 150 mm 94 [ c ] tee plain of the following sizes 95 ( i ) 15 mm 96 ( ii ) 20 mm 97 ( iii ) 25 mm 98 ( iv ) 32 mm 99 ( v ) 40 mm 100 ( vi ) 50 mm 101 ( vii ) 65 mm 102 ( viii ) 80 mm 103 ( ix ) 100 mm 104 ( x ) 125 mm 105 ( xi ) 150 mm 106 [ d ] reducing tee plain of the following sizes ( taking larger dimension ) 107 ( i ) 20 mm 108 ( ii ) 25 mm 109 ( iii ) 32 mm 110 ( iv ) 40 mm 111 ( v ) 50 mm 112 ( vi ) 65 mm 113 ( vii ) 80 mm 114 ( viii ) 100 mm 115 ( ix ) 125 mm 116 ( x ) 150 mm 117 [ e ] socket plain of the following size ( taking larger dimension ) 118 ( i ) 15 mm 119 ( ii ) 20 mm 120 ( iii ) 25 mm 121 ( iv ) 32 mm 122 ( v ) 40 mm 123 ( vi ) 50 mm 124 ( vii ) 65 mm 125 ( viii ) 80 mm 126 ( ix ) 100 mm 127 ( x ) 125 mm 128 ( xi ) 150 mm 129 [ f ] reducing socket plain of the following sizes ( taking larger dimension ) 130 ( i ) 20 mm 131 ( ii ) 25 mm 132 ( iii ) 32 mm 133 ( iv ) 40 mm 134 ( v ) 50 mm 135 ( vi ) 65 mm 136 ( vii ) 80 mm 137 ( viii ) 100 mm 138 ( ix ) 125 mm 139 ( x ) 150 mm 140 [ g ] union socket of the following sizes 141 ( i ) 15 mm 142 ( ii ) 20 mm 143 ( iii ) 25 mm 144 ( iv ) 32 mm 145 ( v ) 40 mm 146 ( vi ) 50 mm 147 ( vii ) 65 mm 148 ( viii ) 80 mm 149 ( ix ) 100 mm 150 ( x ) 125 mm 151 ( xi ) 150 mm 152 [ h ] plugs of the following sizes 153 ( i ) 15 mm 154 ( ii ) 20 mm 155 ( iii ) 25 mm 156 ( iv ) 32 mm 157 ( v ) 40 mm 158 ( vi ) 50 mm 159 ( vii ) 65 mm 160 ( viii ) 80 mm 161 ( ix ) 100 mm 162 ( x ) 125 mm 163 ( xi ) 150 mm 164 [ i ] jam nuts of the following sizes 165 ( i ) 15 mm 166 ( ii ) 20 mm 167 ( iii ) 25 mm 168 ( iv ) 32 mm 169 ( v ) 40 mm 170 ( vi ) 50 mm 171 ( vii ) 65 mm 172 ( viii ) 80 mm 173 ( ix ) 100 mm 174 ( x ) 125 mm 175 ( xi ) 150 mm 176 [ j ] g.i. nipple of the following sizes 177 ( i ) 15 mm dia x 100 mm long 178 ( ii ) 20 mm dia x 100 mm long 179 ( iii ) 25 mm dia x 100 mm long 180 ( iv ) 32mm dia x 100 mm long 181 ( v ) 40 mm dia x 100 mm long 182 ( vi ) 50 mm dia x 100 mm long 183 ( vii ) 65 mm dia x 100 mm long 184 ( viii ) 80 mm dia x 100 mm long 185 ( ix ) 100 mm dia x 100 mm long 186 [ k ] g.i. pipes midium ( tata mark ) or equivalent as per is 1239 ( part 01 ) / 2004 isi marked / medium quality 187 ( i ) 15 mm dia 188 ( ii ) 20 mm dia 189 ( iii ) 25 mm dia 190 ( iv ) 32 mm dia 191 ( v ) 40 mm dia 192 ( vii ) 65 mm dia 193 mirrors 194 ( a ) mirror of 6 mm thick plain glass 600 mm x 450 mm beveled edge mirror including c.p. brass revolving fittings 3 mm plywood board and c.p. hinges etc. to fix the mirror 195 ( b ) do 450 mm x 300 mm do 196 ( a ) glass shelf 600 mm x 125 mm with c.p. brass rail 197 ( b ) do 450 mm x 125 mm do 198 ( a ) c.p. brass towel rail 20 mm x 600 mm with bracket all complete 199 ( b ) anodized aluminum 20 mm x 600 mm towel rail complete with brackets 200 c.p. brass soap dish medium quality with screw and hinges etc. 201 c.p. liquid soap solution holder 202 vitreous white glazed indian water closet of hindustan / parry ware / cera / naycer or any other equivalent make 203 ( a ) 580 mm long 204 ( b ) 510 mm long 205 ( c ) 450 mm long 206 ( d ) 510 mm long white glazed fiber i.w.c 207 pair of vetreous white glazed foot rest of hindustan / parryware / cera / naycer or any other equivalent make 208 15 liters capacity pull and let go high level c.i. cistern complete with ball cock and a pair of bracket 209 ( a ) 12.5 liters lowdown c.i. cistern 210 ( b ) 10.0 liters capacity p.v.c. low design cistern 211 ( a ) white glazed vitreous e.w.c with p trap or any other equivalent make 212 ( b ) e.w.c with s trap 400 mm high of hindustan / parry ware / cera / naycear or any other equivalent make 213 ( c ) black / white plastic seat for e.w.c do as above. 214 ( a ) white glazed vitreous earthen were urinal flat back of hindustan / parryware / cera / naycer or any other equivalent make 600 mm x 350 mm size 215 ( b ) do squatting small 450 mm x 350 mm 216 ( c ) do squatting large 600 mm x 350 mm 217 ( d ) white glazed vitreous earthen ware urinal standing corner size 600 mm x 350 mm hindustan / parryware / cera / naycer or any other equivalent make 218 ( e ) partition plate for urinal 25 x 13 size 219 ( f ) 5 liters c.i. automatic cistern with all p.v.c fittings 220 white glazed vitreous wash hand basin 550 mm x 400 mm size of hindustan / parryware / cera / naycer or any other equivalent make 221 white glazed vitreous earthen ware kitchen sinks of hindustan / parryware / cera / naycer or any other equivalent make 222 ( a ) kitchen sink 600 mm x 450 mm x 200 mm ( 24 x 18 x 8 ) 223 ( b ) kitchen sink 600 mm x 450 mm x 250 mm ( 24 x 18 x 10 ) 224 ( c ) lab sink 450 mm x 300 mm x 150 mm ( 18 x 12 x 6 ) 225 ( d ) lab sink 300 mm x 250 mm x 150 mm ( 12 x 10 x 6 ) 226 drain board 227 ( a ) 600 mm x 450 mm ( 24 x 18 ) 228 ( b ) 525 mm x 450 mm ( 21 x 18 ) 229 h.c.i. pipes 230 ( a ) 50 mm dia single socket 6 0 ( with ear weight 13 kg ) 231 ( b ) 80 mm dia single socket 6 0 ( with ear weight 18 kg ) 232 ( c ) 100 mm dia single socket 6 0 ( with ear weight 23 kg ) 233 ( d ) 150 mm dia single socket 6 0 ( with ear weight 30 kg ) 234 ( e ) 50 mm dia double socket 6 0 ( with ear weight 14 kg ) 235 ( f ) 80 mm dia double socket 6 0 ( with ear weight 19 kg ) 236 ( g ) 100 mm dia double socket 6 0 ( with ear weight 25 kg ) 237 ( h ) 150 mm dia double socket 6 0 ( with ear weight 13 kg ) 238 ( i ) 50 mm dia single socket 3 0 ( with ear weight 7.25 kg ) 239 ( j ) 80 mm dia single socket 3 0 ( with ear weight 10.5 kg ) 240 ( k ) 100 mm dia single socket 3 0 ( with ear weight 13.75 kg ) 241 ( l ) 150 mm dia single socket 3 0 with ear 242 ( m ) 50 mm dia single socket 2 0 ( with ear weight 5.35 kg ) 243 ( n ) 80 mm dia single socket 2 0 ( with ear weight 8.00 kg ) 244 ( o ) 100 mm dia single socket 2 0 ( with ear weight 10.10 kg ) 245 ( p ) 150 mm dia single socket 2 0 with ear 246 ( q ) 50 mm dia single socket 1 0 ( with ear weight 3.4 kg ) 247 ( r ) 80 mm dia single socket 1 0 ( with ear weight 5.50 kg ) 248 ( s ) 100 mm dia single socket 1 0 ( with ear weight 7.60 kg ) 249 ( t ) 150 mm dia single socket 250 h.c.i. fittings. 251 ( i ) plain bend of following size 252 ( a ) 50 mm dia ( weight without ear and socket 2.75 kg ) 253 ( b ) 80 mm dia ( weight without ear and socket 3.5 kg ) 254 ( c ) 100 mm dia ( weight without ear and socket 4.5 kg ) 255 ( d ) 150 mm dia ( weight without ear and socket 4.5 kg ) 256 ( ii ) bend with door with following size 257 ( a ) 50 mm dia ( wight without ear and socket 2.75 kg ) 258 ( b ) 80 mm dia ( wight without ear and socket 4.00 kg ) 259 ( c ) 100 mm dia do 5.5 kg 260 ( d ) 150 mm dia do 261 ( iii ) single junction with door of followings sizes. 262 ( a ) 50 mm dia ( weight without ear and socket 3.75 kg ) 263 ( b ) 80 mm dia ( weight without ear and socket 6.50 kg ) 264 ( c ) 100 mm dia do 9.50 kg 265 ( d ) 150 mm dia do 266 ( iv ) double junction with door of following sizes. 267 ( a ) 50 mm dia do 4.5 kg 268 ( b ) 80 mm dia do 7.00 kg 269 ( c ) 100 mm dia do 13.00 kg 270 ( d ) 150 mm dia do 271 ( v ) heel rest bend of following sizes 272 ( a ) 50 mm dia 273 ( b ) 80 mm dia 274 ( c ) 100 mm dia 275 ( d ) 150 mm dia 276 ( vi ) cowel of following sizes 277 ( a ) 50 mm dia ( weight without ear and socket 2.25 kg ) 278 ( b ) 80 mm dia ( weight without ear and socket 3.25 kg ) 279 ( c ) 100 mm dia ( weight without ear and socket 3.25 kg ) 280 ( d ) 150 mm dia do 281 ( vii ) 100 mm dia p trap ( wt without ear and socket ) 8.5 kg 282 ( viii ) 100 mm dia p trap ( wt without ear and socket ) 8.8 kg 283 ( ix ) 100 mm x 80 mm floor trap ( weight without ear and socket ) 4.00 kg 284 ( x ) pass over 50 mm x 150 mm for 50 mm projection 285 ( xi ) do 100 mm x 150 mm for 100 mm projection 286 ( xii ) inverted junction single 100 mm x 50 ( weight without ear and socket ) 9.0 kg 287 ( xiii ) inverted junction double 100 mm x 50 mm x 50 mm ( weight without ear and socket ) 12.0 kg 288 ( xiv ) h.c.i. offset 80 mm projection of the following size 289 ( a ) 50 mm dia ( weight without ear and socket ) 2.75 kg 290 ( b ) 80 mm dia do 3.50 kg 291 ( c ) 100 mm dia do 5.00 kg 292 ( d ) 150 mm dia do 293 ( xv ) h.c.i. socket of following sizes 294 ( a ) 50 mm dia ( weight without ear ) 1.50 kg 295 ( b ) 80 mm dia ( weight without ear ) 3.00 kg 296 ( c ) 100 mm dia ( weight without ear ) 4.50 kg 297 ( d ) 150 mm dia ( weight without ear ) do 298 c.i. cover with frame for manhole and inspection chamber 299 ( a ) 600 mm x 450 mm size ( wt. 39 kg ) 300 ( b ) 600 mm x 450 mm size ( wt. 25 kg ) 301 ( c ) 500 mm x 450 mm size ( wt. 25 kg ) 302 c.i. bracket pair for w.h.b 303 ( a ) 550 mm x 400 mm size ( 22 x 16 ) 304 ( b ) do for 12.5 liter cistern 305 ( c ) do for 600 mm x 450 mm ( 24 x 18 ) sink 306 ( d ) 40 mm x 60 mm ms plate bracket for sink as above 307 ( a ) 32 mm ( 1 1 / 4 ) c.p. brass waste for w.h.b 308 ( b ) 40 mm ( 1 1 / 2 ) c.p. brass waste for w.h.b for sink 309 ( c ) 32 mm ( 1 1 / 4 ) c.p. waste of white metal 310 ( d ) 40 mm ( 1 1 / 2 ) c.p. waste of white metal 311 ( a ) 32 mm ( 1 1 / 4 ) p.v.c. waste pipe 750 mm long ( 26 long ) with brass union for w h b 312 ( b ) 40 mm ( 1 1 / 2 ) p.v.c. waste pipe 750 mm long ( 26 long ) with brass union for w h b 313 32 mm ( 1 1 / 4 ) p.v.c. telescopic flush pipe with brass union for high level cistern 314 rubber inserttion 3 mm ( 1 / 8 ) thick 315 pig lead 316 yarn 317 rubber gasket for c.i pipe of good quality 318 ( a ) 80 mm 319 ( b ) 100 mm 320 ( c ) 125 mm 321 ( d ) 150 mm 322 ( e ) 200 mm 323 ( f ) 250 mm 324 ( g ) 300 mm 325 ( h ) 350 mm 326 ( i ) 400 mm 327 ( j ) 450 mm 328 ( k ) 500 mm 329 ( l ) 600 mm 330 ( m ) 700 mm 331 ( n ) 750 mm 332 ( o ) 800 mm 333 ( p ) 900 mm 334 ( q ) 1000 mm 335 ( r ) 1200 mm 336 cotton waste 337 asbestos suta ( gland packing ) 338 solvent cement 339 hydrocloric acid ( sepecific gravity 1.20 ) 340 cp & pvc fitting 341 ( i ) 32 mm dia c.p. waste 342 ( ii ) 32 mm dia pv c waste pipe 750 mm long with coupling 343 ( iii ) 40 mm dia c.p. waste 344 ( iv 40 mm dia pvc waste pipe 750 mm long with coupling 345 ( v 100 mm dia steel jali 346 ( vi ) 15 mm dia c.p. nipple with coupling ( short pieces ) 347 ( vii ) 50 mm dia pvc pipe with coupling 348 special type of c.p. bath room fittings for v.i.p. buildings ( jal, jaquar, marc or equivalent mark ) 349 ( i ) pillar cock ( isi ) 350 ( ii ) pillar cock ( long neck ) 351 ( iii ) bib cock ( isi ) 352 ( iv ) bib cock ( long thread ) 353 ( v ) angular stop cock 354 ( vi ) angular stop cock ( long thread ) 355 ( vii ) concealed stop cock reduce ( isi ) 356 ( viii ) concealed stop cock heavy duty extra adjustable wall flange 357 ( ix ) long body bib cock 358 ( x ) swan neck tap with left hand operating knob 359 ( xi ) central hole basin mixer ( best quality ) 360 ( xii ) wall mixer with telephonic shower arrangement 361 ( xiii ) wall mixer with provision for over head shower with elbow coupling and well flange 362 ( xiv ) wall mixer 3 in 1 system with provision for over head shower with elbow coupling and wall flange 363 ( xv ) sink mixer with swinging casted spout 364 ( xvi ) sink cock with swinging casted spout 365 ( xvii ) 4 way diverter for concealed fittings 366 ( xviii ) pressure adjustable shower with revolving joint 367 ( xix ) telephone shower with flexible pipe 368 ( xx ) flush cock with wall flange ( 25 mm ) 369 ( xxi ) towel rail 24 370 ( xxii ) towel ring 371 ( xxiii ) soap dish 372 ( xxiv ) tumbler holder 373 ( xxv ) toilet paper holder 374 ( xxvi ) glass shelf 22 375 ( xxvii ) corner glass shelf with bracket 376 ( xxviii ) flush valve complete with 32 mm size control cock & flange 377 c.i special & pvc pipes 378 1. c.i double shocketted fittings bend such as bend, tee, taper, 379 ( a ) 80 200 mm 380 ( b ) 250 700 mm 381 ( c ) 700 1000 mm 382 2. c.i double flange fittings such as tee, taper, tailpiece, bend etc 383 ( a ) 80 200 mm 384 ( b ) 250 700 mm 385 ( c ) 700 1000 mm 386 spare parts of hand pump 387 hexagonal bolt m12x1.75x40mm long common to marks ii & iii 388 hexagonal nut m12x1.75mm 389 washer m12 ( 2.5mm thick ) 390 high tensile bolt m10x1.5x40mm long. 391 nyloc nut m10x1.5mm 392 handle axle ( stainless steel ) 393 washer for handle axle ( 4mm thick ) 394 ball bearing 6204 z 395 spacer for handle. 396 chain with coupling. 397 hexagonal bolt for front cover m12x1.75mm long. 398 nitrile rubber cup washer for mark – ii & iii 399 nitrile sealing ring mark – ii 400 nitrile rubber seating big for lower valve mark ii 401 nitrile rubber seating small for upper valve mark ii. 402 hexagonal rod coupling m12x1.75x50mm long. 403 pump head assembly ( g.i. ) with front cover, bolt & third plate. 404 front cover ( g.i. ) 405 handle assembly ( g.i. ) 406 ( a ) water tank assembly for mark – ii ( g.i. ) 407 ( b ) water tank assembly for mark – iii ( vlom 65 ) 408 stand assembly ( g.i. ) normal. 409 stand assembly ( telescopic ) ( g.i ) . 410 connecting rod 3mtr. long with coupling and nut ( electrogalvanized ) 411 a ) cylinder assembly complete set for mark ii 412 b ) cylinder assembly complete set for mark iii ( vlom 65 ) 413 a ) upper valve assembly complete set for india mark ii 414 b ) upper valve assembly complete set for india mark iii ( vlom 65 ) 415 a ) lower valve assembly complete set for india mark ii 416 b ) lower valve assembly complete set for im iii 417 reducer cap for cylinder mark ii 418 a ) plunger rod ( s.s. ) for mark – ii 419 b ) plunger rod ( s.s. ) for mark – iii 420 upper valve guide ( g.m. ) . 421 rubber seat retainer for mark ii 422 third plate for head assembly ( galanized ) 423 cylinder body with brass liner for im ii with reducer cap for top and bottom. 424 gun metal spacer. 425 check valve guide mark ii 426 a ) check valve seat for mark – ii 427 b ) check valve seat for mark – iii 428 nitrile rubber “o” ring ( vlom 65 ) 429 push rod for mark – iii ( s.s ) . 430 check nut for push rod ( s.s. ) . 431 nitrile rubber cup washer for vlom 50 432 nitrile rubber sealing ring for mark – iii vlom 65 433 nitrile rubber seating big for lower valve mk ii 434 nitrile rubber seating big for lower valve m iii vlom 65 ) 435 nitrile rubber bobbin vlom 50 436 nitrile rubber “o” ring vlom 50 437 nitrile rubber cone for vlom 50 438 nitrile rubber cone for vlom 65 439 nitrile rubber centralizer 150mm for ( vlom 65 ) . 440 nitrile rubber centralizer 125mm for ( vlom 65 ) . 441 nitrile rubber centralizer 150mm for ( vlom 50 ) . 442 nitrile rubber centralizer 125mm for vlom 50 443 nitrile rubber centralizer 100mm for vlom 50 444 water tank assembly mark – iii vlom 50 445 cylinder assembly complete set for mark – iii ( vlom 50 ) 446 upper valve assembly complete set for im iii ( vlom 50 ) 447 lower valve assembly complete set for im iii ( vlom 50 ) 448 a ) upper cap cylinder mark – iii ( vlom 65 ) 449 b ) upper cap cylinder mark – iii ( vlom 50 ) 450 a ) bottom cap for mark – iii ( vlom 50 ) 451 b ) bottom cap for mark – iii ( vlom 65 ) 452 follower for im iii 453 cage for mark iii 454 s.s. hexagonal bolt m 6x25mm long. 455 basic rate of standard i.s.i. mark deep well hand pump for india mark 2, i.s.i. 15500 ( part 2 ) / 2004 with latest revision including 12mm x 3meter long 8 no. connecting rods made of bright bar electro galvanized fitted with coupler & normal stand assembly ecommended for use with cylinder assembly suitable for bore well dia 100 to 125mm casing pipe. 456 basic rate of upvc pipe 125mm dia conforming to i.s.i. latest revision is 12818 / 2016 cml no. 5543459 457 basic rate of 32mm g.i. pipe in 3 mtrs. length ( medium ) with seamless socket as per relevent b.i.s. specification is 1239 ( part i ) / 2004 458 di pipe : providing and supplying isi mark centrifugally cat ( spun ) ductile iron pipes of 100 mm and above all diameter for water works with socket & spigot ends confirming to is 8329 / 2000 in the standard working lengths of 4.5, 5.5 & 6 m suitable for classification k 7 & k 9 suitable for push on joint ( rubber gusket d jointing ) with cement mortar lining inside the pipes with outside zinc and bittuminous coating. rates are ex factory excluding transpotion, taxes & duties, contractor profit & overhead charges etc.based on wpi 100.3 of may 2020 ( including cost of one no. gasket for each pipe ) 459 note : ( i ) the rates are exfactory but exclusive of gst & c.p. based on wpi 100.3 of may 2020. ( ii ) price variation of di pipe will be calculated based on prevalling wpi. 460 size 461 100 mm dia 462 150 mm dia 463 200 mm dia 464 250 mm dia 465 300 mm dia 466 350 mm dia 467 400 mm dia 468 450 mm dia 469 500 mm dia 470 600 mm dia 471 700 mm dia 472 750 mm dia 473 800 mm dia 474 900 mm dia 475 1000 mm dia 476 1100 mm dia 477 1200 mm dia 478 size 479 100 mm dia 480 150 mm dia 481 200 mm dia 482 250 mm dia 483 300 mm dia 484 350 mm dia 485 400 mm dia 486 450 mm dia 487 500 mm dia 488 600 mm dia 489 700 mm dia 490 750 mm dia 491 800 mm dia 492 900 mm dia 493 1000 mm dia 494 1100 mm dia 495 1200 mm dia 496 providing and supplying of isi standard di specials & fitting with sealing rubber gasket of sbr, complete with cast iron follower gland & ms nut bolts coated or otherwise protected from rusting and suitable for di pipescomplete as per is 9523 class k 12 ( ex factory rates ) inspection charge transportation , cp extra. 497 socketed 498 100 150 mm dia 499 200 300 mm dia 500 350 450 mm dia 501 500 600 mm dia 502 700 mm dia 503 800 mm dia 504 900 mm dia 505 1000 mm dia 506 1100 mm dia 507 1200 mm dia 508 flanged 509 100 150 mm dia 510 200 300 mm dia 511 350 450 mm dia 512 500 600 mm dia 513 700 mm dia 514 800 mm dia 515 900 mm dia 516 1000 mm dia 517 1100 mm dia 518 1200 mm dia 519 providing and supplying in standard lengths high density polyethylene pipe ( hdpe pipe ) confirming to is 4984 4984 / 14151 / 12786 / 13488 ( latest revision with necessary jointing materials like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joints excluding coupler / specials and taxes ) . 520 hdpe pipe of materials grade pe80 pn06 ( dia in mm ) 521 25 mm dia 522 32 mm dia 523 40 mm dia 524 50 mm dia 525 63 mm dia 526 75 mm dia 527 90 mm dia 528 110 mm dia 529 125 mm dia 530 140 mm dia 531 160 mm dia 532 180 mm dia 533 200 mm dia 534 225 mm dia 535 250 mm dia 536 280 mm dia 537 315 mm dia 538 355 mm dia 539 400 mm dia 540 450 mm dia 541 500 mm dia 542 hdpe pipe of materials grade pe80 pn10 ( dia in mm ) 543 25 mm dia 544 32 mm dia 545 40 mm dia 546 50 mm dia 547 63 mm dia 548 75 mm dia 549 90 mm dia 550 110 mm dia 551 125 mm dia 552 140 mm dia 553 160 mm dia 554 180 mm dia 555 200 mm dia 556 225 mm dia 557 250 mm dia 558 280 mm dia 559 315 mm dia 560 355 mm dia 561 400 mm dia 562 450 mm dia 563 500 mm dia 564 providing and supplying in standard lengths high density polyethylene pipe ( hdpe pipe ) 25mm to 500mm dia confirming to is 4984 4984 / 14151 / 12786 / 13488 ( latest revision with necessary jointing materials like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joints excluding coupler / specials and taxes. 565 hdpe pipe of materials grade pe100 pn06 ( dia in mm ) 566 25 mm dia 567 32 mm dia 568 40 mm dia 569 50 mm dia 570 63 mm dia 571 75 mm dia 572 90 mm dia 573 110 mm dia 574 125 mm dia 575 140 mm dia 576 160 mm dia 577 180 mm dia 578 200 mm dia 579 225 mm dia 580 250 mm dia 581 280 mm dia 582 315 mm dia 583 355 mm dia 584 400 mm dia 585 450 mm dia 586 500 mm dia 587 hdpe pipe of materials grade pe100 pn10 ( dia in mm ) 588 25 mm dia 589 32 mm dia 590 40 mm dia 591 50 mm dia 592 63 mm dia 593 75 mm dia 594 90 mm dia 595 110 mm dia 596 125 mm dia 597 140 mm dia 598 160 mm dia 599 180 mm dia 600 200 mm dia 601 225 mm dia 602 250 mm dia 603 280 mm dia 604 315 mm dia 605 355 mm dia 606 400 mm dia 607 450 mm dia 608 500 mm dia 609 rcc esr 610 designing ( aesthetically ) , and constructing rcc elevated service reservoirs of following capacity with rcc staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for esr having capacity upto 500 cum and not more than 6m c / c for esr having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the in side and out side face of the container and also plaster with plastic paint in all columns and bracings including refilling disposing off the surplus stuff with in a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as m.s. ladder out side, stainless steel lader in contenor, c.i. manhole frame and covers, water level indicators, lightening conductor, g.i. pipe railing around walk way and top slab, providing stair case from ground level to roof level, m.s. grill gate of 2m height with locking arrangement of approved design, b.b. masonry chambers for all valves, ventilating shafts, providing and applying three coats of acrylie emulsion with silicon edditives paint to the structure incluing roof slab, epoxy painting to internal surface and anti termite treatment for under ground part soft he structure and giving satisfactory water tightness test as per i.s. code. the job to include painting then ame of the scheme and other details on the reservoir as per the directions of engineer in charge. 611 notes 612 the design of the structure be in accordance with relevant i.s. specification ( i.s. 3370 1965 or revised. ) 613 the design shall satisfy the stipulations as per i.s. 1893 1984 and i.s.13920 / 1993 for seismic force and i.s. 11682 / 1985 for r.c.c. staging of over head tanks. 614 for design having more than 6 columns, suitable bracing is obligatory. 615 plain round mild steel bars grade i conforming to i.s.432 part i orhigh yield strength deformed bars conforming to i.s. 1786 or i.s. 1139 shall beused, grade i imild steel bars will not be allowed 616 irrespective of the type of foundation proposed in the design, one set of bracing be provided at the ground level. 617 these rates include providing m.s. ladder for e.s.r.s upto 2 lakh litres capacity and providing spiral stair case for e.s.r. above 2 lakh litres capacity. 618 staging shall have to bede signed with stresses of m 200 concrete for esr. however all rcc construction should be donein m 250. structures in contact with water shall be designed & casted in m 300 619 these rates are including the cost of up lift pressure if any and entire dewatering during execution. incase of water logging are a where water is struck at shallow depth, extra provision of dewatering shall be made as per site condition. 620 all conditions given in the member secretarys circular no. mjp / ts i / 350 / 1668 dt. 2 8 97 and mjp / s i / 350 / 2127 dt. 13 7 99 shall be strictly followed and additional cost, if any, due to these conditions is included in the rates mentioned below. 621 75 % part rate shall be payable for reinforcement concrete and plastering items of containers of e.s.r. till satisfactory hydraulic testing for water tightness is given; and till that work shall be treated as incomplete. 622 the rates indicated in the table are excluding the cost of pipes, specials and valves required for inlet, outlet, washout, overflow and bypass arrangement. the scope of work, however, includes cost of erecting, laying and jointing of pipe and valves including cost of jointing materials upto 5 m beyond outer face of outer most column ( cost of pipe, specials and valves is taken as 10% of the cost of esr as per table ) . 623 for esr upto 500 cum capacity c.i. double flanged pipes upto 300 mm dia shall be provided and c.i. specials shall be used. for esr above 500 cum capacity c.i. / m.s. pipe assembly with minimum 8 mm thickness upto 500 mm dia and minimum 10 mm thickness above 500 mm dia can be used with proper anti corrosive epoxy treatment from in side and out side. 624 below mentioned rates are for foundation swith individual footing with bearing capacity of 20 tonnes per square metre. for raft foundations, these rates shall be increased by 7.5% where safe bearing capacity ( sbc ) is 5 mt per sqm and by 5 % where sbc is more than 5mt / sqm and upto 10 mt / sqm. this % of 5 % or 7. 5 % is applicable for estimation of amount of lumpsum item of esr. for extra item due to change from individual foundation to raft, actual increase in concrete and steel be paid as per relevant dsr item. 625 the rate shall be increased by 30 % for bearing piles upto depth of 10 m and for further increased in depth by 5 m each, it shall be increased by another 10%. these rates are applicable where raft is not feasible. for pile foundations sulphate resistant cement shall only beused. single pile for the column is not permitted, group of piles shall be designed with pile cap for each column of esr. 626 the rates are applicable for staging height of 12 m. these rates shall be increased or decreased for per metre variation in this staging height as below : 627 12 to 16 m staging 2% per metre 628 16 to 20 m staging 3% per metre 629 20 m and above 4% per metre 630 for 17 m staging height, percentage calculation will be like below : 631 12 to 16 m 4 x 2 = 8% 632 16 & 17 m 1 x 3% = 3% total = 11% 633 for 21 m staging height, percentage calculation will be like below : 634 12 to 16 m 4 x 2 = 8% 635 16 to 20 m 4 x 3% = 12% 636 20& 21 m 1 x 4% = 4% total = 24% 637 following rates are for seismic zone iii. for zone iv, these rates shall be increased by 5% and for zone ii, these rates shall be decreased by 5%. concerned executive engineer shall confirm the seismic zone for the scheme from seismic zone splan before estimation and adopt appropriate rates as per actual seismic zones. ( seismic maps attached in this csr ) . 638 notes 639 conditions from sr.no.1 to 10 shall form a part and parcel of the tender and must be included in the draft tender papers for works of r.c.c. e.s.r. 640 conditions from sr.no.11 to 16 are for estimation purpose only and shall not appear in the tender. 641 rates for rcc esrs 642 upto 25, 000 litres 643 cost of 25, 000 litres capacity 644 add for capacity above 25, 000 upto 50, 000 litres 645 cost of 50, 000 litres capacity 646 add for capacity above 50, 000 upto 75, 000 litres 647 cost of 75, 000 litres capacity 648 add for capacity above 75, 000 upto 1, 00, 000 litres 649 cost of 1, 00, 000 litres capacity 650 add for capacity above 1, 00, 000 upto 1, 50, 000 litres 651 cost of 1, 50, 000 litres capacity 652 add for capacity above 1, 50, 000 upto 2, 00, 000 litres 653 cost of 2, 00, 000 litres capacity 654 add for capacity above 2, 00, 000 upto 2, 50, 000 litres 655 cost of 2, 50, 000 litres capacity 656 add for capacity above 2, 50, 000 upto 3, 00, 000 litres 657 cost of 3, 00, 000 litres capacity 658 add for capacity above 3, 00, 000 upto 4, 00, 000 litres 659 cost of 4, 00, 000 litres capacity 660 add for capacity above 4, 00, 000 upto 5, 00, 000 litres 661 cost of 5, 00, 000 litres capacity 662 add for capacity above 5, 00, 000 upto 7, 50, 000 litres 663 cost of 7, 50, 000 litres capacity 664 add for capacity above 7, 50, 000 upto 10, 00, 000 litres 665 cost of 10, 00, 000 litres capacity 666 add for capacity above 10, 00, 000 upto 15, 00, 000 litres 667 cost of 15, 00, 000 litres capacity 668 add for capacity above 15, 00, 000 upto 20, 00, 000 litres 669 cost of 20, 00, 000 litres capacity 670 rcc gsr and sump 671 designing ( aesthetically ) , and constructing rcc ground service reservoirs / rcc sumps in m 300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top rcc roof slab / or dome, 20 mm thick cement plaster with water proofing compound in cm 1:3 proportion. to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 m, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye pass arrangement consisting of c.i. / m.s. d / f. pipes, specials and valves of given diameters, providing and fixing accessories such as m.s. ladder inside and outside, c.i. manhole frame and cover, water top slab, b.b. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per is code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. 672 anti –termite treatment shall be given for under ground portion of the structure. 673 notes 674 the design shall be in accordance with various relevant i.s. specification ( i.s.456 / 2000, i.s.875 1987, i.s.3370 1965 or revised. ) 675 only m.s. bars grade i conforming to i.s. 432 part i or high yield strength deformed bars conforming to i.s. 1786 or i.s.1139 shall be used.grade ii m.s. bars shall not be used. 676 entire structure shall be in m 300 only. 677 the scope of pipe assembly work shall be upto 5 metre beyond out side face of the wall, cost of pipes valves and specials is not included in the rate but labour cost for laying and jointing is included. 678 the g.s.r. / sump above 15 lakh litres capacity shall be in two compartment. 679 the job includes designing the structure for up lift pressure and dewatering if required during entire execution and disposal of surplus excavated stuff within lead of 50 metres as directed by engineer in charge. if up lifts considered in design, then these rates shall be increased by 7.5%. 680 g.s.r. outlets shall be with bell mouth of approved pattern in bottom slab and cost of designing bell mouth is included in the rate. sump well includes cost of suction pit required at bottom. 681 for pipe diameters upto 300mm only cipipes and ci specials shall be used. for pipe diameters above 300mm, m.s. pipes and specials minimum 10mm thick shall be used with proper anti corrosive epoxy treatment from inside and outside. 682 cost of pump house is not included in these rates. 683 above rates are applicable for seismic zones 2, 3 and 4. 684 75% part rate shall be payable for reinforcement, concrete and plastering items of all types of g.s.r. sand sump still satisfactory hydraulic testing for water tightness test is given and till that work shall be treated as incomplete. 685 10% shall be added for sump if over head pump house is proposed. 686 note: conditions from sr.no.1 to 11 shall form a part and parcel of tender and must be included in the draft tender papers for work of r.c.c .gsrs and sumps. 687 rates for rcc gsrs and sumps 688 upto 25, 000 litres 689 cost of 25, 000 litres capacity 690 add for capacity above 25, 000 upto 50, 000 litres 691 cost of 50, 000 litres capacity 692 add for capacity above 50, 000 upto 75, 000 litres 693 cost of 75, 000 litres capacity 694 add for capacity above 75, 000 upto 1, 00, 000 litres 695 cost of 1, 00, 000 litres capacity 696 add for capacity above 1, 00, 000 upto 1, 50, 000 litres 697 cost of 1, 50, 000 litres capacity 698 add for capacity above 1, 50, 000 upto 2, 00, 000 litres 699 cost of 2, 00, 000 litres capacity 700 add for capacity above 2, 00, 000 upto 3, 00, 000 litres 701 cost of 3, 00, 000 litres capacity 702 add for capacity above 3, 00, 000 upto 5, 00, 000 litres 703 cost of 5, 00, 000 litres capacity 704 add for capacity above 5, 00, 000 upto 10, 00, 000 litres 705 cost of 10, 00, 000 litres capacity 706 addforcapacityabove10, 00, 000upto15, 00, 000 litres 707 cost of 15, 00, 000 litres capacity 708 add for capacity above 15, 00, 000 litres 709 note: 10% shall be added over the cost of gsr for sump where over head pump house is proposed. 710 unconventional water treatment plant 711 designing ( aesthetically ) , providing and constructing high rate unconventional water treatment plant i.e. simplified water treatment plant consisting of civil works including cost of providing and applying epoxy paint to inside surface of water retaining structures in contact with chlorine and providing anti termite treatment to entire structure below ground level, ceramic tiles for floring, acrylic emulsion with silicon additives paint from outside stainless steel railing, mechanical and electrical components of various sub works as given below : including necessary hydraulic testing, structural testing and trial for 3 months, etc. complete as directed by engineer in charge ( turn key job ) works. 712 aeration fountain 713 inlet arrangements 714 mixing channel with ventury flume and flow measuring arrangement 715 inlet channel 716 flocculator conforming to i.s. 7208 1974 ( type c ) with detention period of 30 minutes 717 tube settlers designing, fabricating and constructing tube settlers with square or any other shaped tube like circular, cheveron, hexagonal etc .having proven performance 718 rapid sand gravity filters all valve shall be glandless. 719 filter house 720 chemical house 721 alum tanks 2nos. with mixing, carrying and dosing arrangements with piping. 722 100 kg chlorine cylender for capacity upto 5mld and chlorine tonner for capacity above 5 mld. 723 tcl solution tank with mixing, carrying and dosing arrangement with piping. 724 bypass arrangement 725 external and internal electrification 726 laboratory equipments 727 wash water tanks of capacity equal to12 minutes to wash specified number of filter beds at time at 600 lit / m2 / m under head of 12m at under drain. 728 wash water pumps with 100% standby 729 air blowers capable of delivering 600 lmp per square metre of free air of filter area at 0.4 kg / sqcm at the under drains ( 100 % standby ) . air blowers shall be adopted for wtp having capacity more than 3 mld only. below 3 mld capacity, air blowers shall not be adopted. 730 pure water sump of capacity equal to 1 hour pumping capacity. 731 pure water pump house over the sump / by the side of sump. 732 drainage arrangements 733 alum store 734 sanitary block with necessary water supply and drainage arrangements and internal wbm roads. 735 these rates are applicable for seismic zones 2, 3 and 4. 736 rates given below are inclusive of uplift pressure if any and dewatering during the entire work. 737 all rcc structures shall be constructed in m 250. structures in contact with water shall be in m 300. 738 unconventional treatment plants less than 1 mld capacity shall not be constructed. 739 all the structural steel works / fabrications are to be provided with application of hot dip zinc coating according to specification as per is 4759:1996 ( reafirmed 2006 ) . 740 note: conditions from sr. no. 1 to 28 shall form a part and parcel of the tender and must be included in draft tender papers for the work of unconventional treatment plants. 741 unconventional water treatment plant 742 fixed cost for 1 mld 743 add for capacity above 1 mld upto 2 mld 744 cost of 2 mld treatment plant 745 add for capacity above 2 mld upto 3 mld 746 cost of 3 mld treatment plant 747 conventional water treatment plant 748 designing ( aesthetically ) , providing constructing and commissioning conventional water treatment plant consisting of all civil, mechanical and electrical works including cost of providing and applying epoxy paint to inside surface of water retaining structures in contact with chlorine and providing antitermite treatment to entire structure below ground level, mechanical and electrical components of various sub works as given below, including necessary hydraulic testing, structural testing, equipment testing and trial run for a period of 3 months, etc. complete as directed by engineer in charge ( turn key job ) . 749 aeration fountain plan are a not less than 0.625 square metre per mld 750 ventury flume with necessary devices, consisting of simple mechanical indicator. ( pedestal type gauge ) 751 flash mixer rapid mixing device, detention time 60 seconds to give velocity gradient 300 to 400 sec 1, vane mixer type conforming to i.s. 7090 of 1985. 752 flocculator – conforming to i.s.7208 1974 ( type c ) with detention period of 30 minutes. 753 clarifier horizontal flow circular tank, detention period 2 5 hours, overflow rate 30 cubic metre per square metre per day ( to be specified ) , weir loading not more than 300 cubic metre per metre per day, with mechanical sludge scraper conforming to i.s. no. 10313 1982. 754 rapid sand filter sand filter house filter designed for filteration rate of 5, 000 litres per square metre per hour, minimum 2 beds for plant upto 10 mld, for larger plants as specified, filters to be located in filter house with roof slab, pipe gallery and platform minimum 5.5 metre in width. 755 filtersand effective size 0.45 to 0.70mm, uniformity coefficient not more than 1.7, nor less than 1.3, depth of water over sand 0.75m, free board 50cm, gravel 0.45m in depth, sand and gravel conforming to i.s. 8491 ( i ) 77, back wash by air wash, stand ard appurtenances ( to be specified ) , rate of flow controller, filter gauge, sand expansion gauge, etc. 756 wash water tank capacity to be specified and suitable to supply water to wash 2 filter units at a time where the units are 4 or more. 757 wash water pumps capacity to fill water tank in 1 hour with 100% standby. 758 air blowers capable of delivering 600 lmp per square metre of free air, of filter area at 0.4kg / sqcm at the under drains ( 100% standby ) . 759 chemical house in two storeys 760 ground floor to accommodate 7 days alum requirement and sundry storage. 761 first floor to accommodate alum and lime tanks. etc. 762 solution tanks minimum 3 tanks ( one for preparation, second for dosing and third as standby ) , each tank capable of giving 8 hours maximum dose without interruption, minimum free board 0.30m, trays for dissolving, level indicator, mechanical agitation devices, solution feed and drain lines, solution feed device ( constant head device, strength of solution upto 10% only ) conforming to i.s. 9222 part i 1979. 763 pure water sump and sump house. 764 capacity of sump – one hour of designed flow. 765 pump house pump house of required size over the sump or by the side. 766 store house suitable for alum storage of three months requirement in monsoon with 10% extra capacity for other sundry articles. 767 vacuum feed type chlorinators make tobe approved by mjp. 768 conforming to i.s. 10533 a part ii 1983 769 rate for withdrawal 770 temperature kg. of chlorine discharge degree c per day ( cylinders ) 771 45 67 tonnes 772 10 6.35 9.50 110 773 15 10.75 16.10 130 774 20 14.50 21.24 254 775 27&above 18.70 28.12 315 776 chlorinator equipment and container room to conform to i.s. 10553 part i 1983. 777 100% standby shall be provided. 778 by pass arrangements c.i. or m.s. pipes. 779 disposal of waste from wtp: safe disposal arrangement to near by nala including cost of pipe 780 for wtp of capacity 30 mld and more additional arrangement for backwash water recycle shall be provided, including sump, pupming machinary, rising main etc complete 781 drainage arrangements – rcc pipes up to plot boundary. 782 electrical installation – both internal and external including entire plant area. 783 laboratory equipment –as per requirement ( to be specified during tendering ) . 784 sanitary blocks – carpet area 15 square metre minimum upto 25 mld and 25 square metre above 25 mld. 785 administrative block and internal road to accommodate office room, chlorine room, laboratory room, panel board room, blower room etc. and wbm road to connect all units from main gate of plot. 786 rates given below are inclusive of up lift pressure if any and dewatering during entire work. 787 all pipes condutes channels with20%overloading 788 these rates are applicable for seismic zones 2, 3 and 4. 789 all rcc structures shall be constructed in m 300. 790 note: conditions from sr. no. 1 to 22 shall form a part and parcel of the tender and must be incorporated in draft tender papers of conventional treatment plants ( proposed ) . 791 conventional water treatment plant 792 above 3 mld to upto 5 mld 793 cost of 5 mld treatment plant 794 add for capacity above 5mld upto 10 mld 795 cost of 10 mld treatment plant 796 add for capacity above 10 mld upto 20 mld 797 cost of 20 mld treatment plant 798 add for capacity above 20 mld upto 50 mld 799 cost of 50 mld treatment plant 800 add for capacity above 50 mld upto 100 mld 801 cost of 100 mld treatment plant 802 add for capacity above 100 mld 803 gpt / hygpt : drilling by rotary drill machine of size 300mm & 400mm dia with t.c. drill bit for tubewells in all kinds of soil including moorum, hard soil, soil mixed with pebbles, shingles, compacted soil, clay, soft and decomposed rock etc, up to 60 meters depth including reaming to facilitate smooth lowering of casing pipe etc. as per specification and direction of e / i ( basic rates ) 804 300 mm dia for gpt 805 400 mm dia for hygpt 806 hydt : cost of drilling 200 mm x 165 mm x 125 meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic dth rig machine, all complete including supplying all materials, tools, drilling rig, air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicles up to the site ( basic rates ) 807 from 0 50 meter 808 from 51 125 meter 809 ms pipe 810 supplying all tools, tackles & lowering of 200 mm dia ms erw casing pipe of 6mm wall thickness including welding charges, cost of pipe etc . all complete job ( basic rates ) 811 supplying all materia;ls, labours, tools & equipments for fitting & fixing 200mm dia ms cap over casing pipe complete job ( basic rates ) 812 dt : basic rates for 125 / 115 mm dia drilled tube well for drilling in all kinds of soil and rock for installation of hand pump with dth rig machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant, for making 125 / 115 mm dia boring etc. and cost of transporting rig machine and other vehicle up to site of work as per specification and dirrection of engineer incharge ( basic rates ) 813 drillig upto 30 mtr depth below g. l. in rural area 814 drilling beyond 31 mtr upto 60 mtr below g. l. in rural area 815 trenchless 816 installation of product pipe by manual pipe jacking method including making of entry and exit pits all related civil works like excavation , shoring / strutting etc manual shielded excation , lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 817 from 900 mm to 1000 mm dia 818 in soft soil 819 in hard soil 820 in sandy soil 821 in stone soil 822 from 1000 mm to 1200 mm dia 823 in soft soil 824 in hard soil 825 in sandy soil 826 in stone soil 827 above 1200 mm to 1500 mm dia 828 in soft soil 829 in hard soil 830 in sandy soil 831 in stone soil 832 installation of product pipe by auger boring method including making of entry and exit pits all related civil works like excavation , shoring / strutting etc shielded excavation , through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 833 upto 300 mm dia 834 in soft soil 835 in hard soil 836 in sandy soil 837 in stone soil 838 above300 mm to 450 mm dia 839 in soft soil 840 in hard soil 841 in sandy soil 842 in stone soil 843 above 450 mm to 600 mm dia 844 in soft soil 845 in hard soil 846 in sandy soil 847 in stone soil 848 above 600 mm to 900 mm dia 849 in soft soil 850 in hard soil 851 in sandy soil 852 in stone soil 853 installation of product pipe by guided auger boring method including making of entry and exit pits all related civil works like excavation , shoring / strutting etc shielded excavation , through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering in charge all complete exept the cost of the pipe average cover of 1.5 depth below gi ( upto 100 meter installation length ) 854 upto 300 mm dia 855 in soft soil 856 in hard soil 857 in sandy soil 858 in stone soil 859 above300 mm to 450 mm dia 860 in soft soil 861 in hard soil 862 in sandy soil 863 in stone soil 864 above 450 mm to 600 mm dia 865 in soft soil 866 in hard soil 867 in sandy soil 868 in stone soil 869 above 600 mm to 900 mm dia 870 in soft soil 871 in hard soil 872 in sandy soil 873 in stone soil 874 providing and supplying isi mark ci / d / f reflux valves ( non return valves ) of following dia inspection charges unloading from railway wagon , loading into truck transportation upto department stores / site unloading stacking etc. complete reflux valve as per is 5312 part i ( 1984 ) 875 without byepass arrangement pn 1 876 50 mm 877 65 mm 878 80 mm 879 100 mm 880 125 mm 881 150 mm 882 200 mm 883 250 mm 884 300 mm 885 350 mm 886 400 mm 887 450 mm 888 500 mm 889 600 mm 890 700 mm 891 750 mm 892 800 mm 893 900 mm 894 1000 mm 895 1100 mm 896 1200 mm 897 with byepass arrangement pn 1 898 50 mm 899 65 mm 900 80 mm 901 100 mm 902 125 mm 903 150 mm 904 200 mm 905 250 mm 906 300 mm 907 350 mm 908 400 mm 909 450 mm 910 500 mm 911 600 mm 912 700 mm 913 750 mm 914 800 mm 915 900 mm 916 1000 mm 917 1100 mm 918 1200 mm 919 without byepass arrangement pn 1.6 920 50 mm 921 65 mm 922 80 mm 923 100 mm 924 125 mm 925 150 mm 926 200 mm 927 250 mm 928 300 mm 929 350 mm 930 400 mm 931 450 mm 932 500 mm 933 600 mm 934 with byepass arrangement pn 1.6 935 50 mm 936 65 mm 937 80 mm 938 100 mm 939 125 mm 940 150 mm 941 200 mm 942 250 mm 943 300 mm 944 350 mm 945 400 mm 946 450 mm 947 500 mm 948 600 mm 949 providing double flange sluice valve ( size 50 mm to 1200 mm ) confirming for is 2906 / 14846 including worn gear arrangements as per test pressure stailess steel spindle , caps transportation etc. all complete . 950 with byepass arrangement pn 1 951 50 mm 952 65 mm 953 80 mm 954 100 mm 955 125 mm 956 150 mm 957 200 mm 958 250 mm 959 300 mm 960 350 mm 961 400 mm 962 450 mm 963 500 mm 964 600 mm 965 700mm 966 750 mm 967 800 mm 968 900 mm 969 1000 mm 970 1100 mm 971 1200mm 972 without byepass arrangement pn 1 973 50 mm 974 65 mm 975 80 mm 976 100 mm 977 125 mm 978 150 mm 979 200 mm 980 250 mm 981 300 mm 982 350 mm 983 400 mm 984 450 mm 985 500 mm 986 600 mm 987 700mm 988 750 mm 989 800 mm 990 900 mm 991 1000 mm 992 1100 mm 993 1200mm 994 providing double flange sluice valve confirming for is 2906 / 14846 including worn gear as per test pressure stailess steel spindle , caps transportation etc. all complete for rateincluding all taxes . . 995 without byepass arrangement pn 1.6 996 50 mm 997 65 mm 998 80 mm 999 100 mm 1000 125 mm 1001 150 mm 1002 200 mm 1003 250 mm 1004 300 mm 1005 350 mm 1006 400 mm 1007 450 mm 1008 500 mm 1009 600 mm 1010 700mm 1011 750 mm 1012 800 mm 1013 900 mm 1014 1000 mm 1015 1100 mm 1016 1200mm 1017 with byepass arrangement pn 1.6 1018 50 mm 1019 65 mm 1020 80 mm 1021 100 mm 1022 125 mm 1023 150 mm 1024 200 mm 1025 250 mm 1026 300 mm 1027 350 mm 1028 400 mm 1029 450 mm 1030 500 mm 1031 600 mm 1032 design and supply of v wire screen laterals suitable for infiltration galleryas per site condition and detail provided end connection suitable flange excluding taxes and transportation . 1033 dia 06 inch ( 150 mm ) 1034 id 153 mm od 167 mm 1035 screen thickness 07 mm 1036 slot 1.00 mm 1037 moc low carbon galvenised steel 1038 length 5 mtr. 1039 dia 08 inch ( 200 mm ) 1040 id 205 mm od 221mm 1041 screen thickness 08 mm 1042 slot 1.00 mm 1043 moc low carbon galvenised steel 1044 length 5 mtr. 1045 dia 10 inch ( 250 mm ) 1046 id 256 mm od 276mm 1047 screen thickness 10 mm 1048 slot 1.00 mm 1049 moc low carbon galvenised steel 1050 length 5 mtr. 1051 dia 12 inch ( 300 mm ) 1052 id 306 mm od 326 mm 1053 screen thickness 10 mm 1054 slot 1.00 mm 1055 moc low carbon galvenised steel 1056 length 5 mtr. 1057 dia 14 inch ( 350 mm ) 1058 id 338 mm od 363 mm 1059 screen thickness 12.5 mm 1060 slot 1.00 mm 1061 moc low carbon galvenised steel 1062 length 5 mtr. 1063 supplying all materials, labours, equipments for lowering 125mm dia blue upvc casing pipe as casing for protecting the sides from falling during the process of drilling all complete including carriage of materials to work site ( basic rate ) . 1064 supplying all tools, equipments and labour and doing washing, flushing and development of drilled tube well to give clean and clear water all complete as per dirction e / i ( basic rate ) . 1065 supplying labour cement and calcium chloride or bentonite solution and equipments for grouting the casing pipe after lowering in the bore including carriage of materials to work site etc. all complete as per specification & direction of e / i ( basic rate ) . 1066 supplying labour and equipments including 125mm dia g.i. cap and fitting and fixing over the casing pipe of tube well properly and taking it out as per direction e / i ( the cap will be the property of department ) ( basic rate ) . 1067 supplying all materials, labours, equipments for constructing p.c.c. ( 1:2:4 ) circular platform around drilled tube well including 12mm thick cement plaster ( 1:4 ) with neat cement punning over exposed surface as per unicef design, etc. all complete including carriage of materials ( basic rate ) . 1068 supplying all materials, labours and equipments for constructing p.c.c. ( 1:2:4 ) drain as per unicef design etc. all complete including carriage of materials ( basic rate ) . 1069 supplying extra deep well hand pump complete sets with cylinder assembly & connecting rod ( 12 pcs ) as per is : 15500 part 2 / 2004 ( basic rate ) . 1070 supply of 200mm dia x 3.00m long upvc casing pipe conferming to is : 12818 : 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . 1071 supply of 200mm dia ribbed screen pipe conferming to is : 12818 : 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . 1072 supply of 125mm dia ribbed screen pipe conferming to is : 12818 : 2016 ( cml no. 5543459 ) latest revision including carrigae ( basic rate ) . 1073 supplying all tools, equipments and labour and lowering 32 mm dia medium quality g.i. pipe in drilled tube well in 3 mtrs. length all complete as per dirction e / i including carriage of materials ( basic rate ) . 1074 supplying all tools, labour for fitting and fixing deep well cylinder with necessary connecting rod complete job as per specification & direction of e / i including carriage of materials ( basic rate ) . 1075 supplying all materials, labours and fixing india mark ii hand pump with all accessories all complete job as per direction of e / i including carriage of materials ( basic rate ) . 1076 design, supply, installation testing & commissioning of packaged water treatment plants ( unconventional type ) of different capacity with ( 20 hours operation ) comprising of lamella clarifier, static mixture flocculation tank ( smet ) , multi grade filter ( mgf ) with best quality filter media, lime / coagulant / polymer dosing system hypo chloride dosing system, raw water feed pump / clear water transfer pump ( either or ) , sludge transfer cum recirculation pump, filter feed pump & back wash pump including all fitting like valve and other special fittings and electrical power supply to the different supplied units with mcb panel internal electrification with lighting arrangement with treatment plant site with provision of chemical storage and water testing boratory facility should be from a reputed manufacturer / authorized distribution / authorized dealer conforming to relevant is codes and certified by iso 9001 2008 & 14001, it also include cost of civil foundation, including clarified water tank internal connecting pipe line from raw water inlet to cwr and applying internal epoxy paint on the supply equipment all the prices are exclusive of gst, allied structure / items which are site specific such as external electrification, approach road, foot bridge, cofferdam, compound wall, scada and automation, cwr pumps etc are to be considered extra. 1077 1078 1079 1080 1081 1082 pumps 1083 supplying 100 mm dia submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene / noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single / double run shall be provided with each pump. 1084 submersible pump set 100 mm dia ( with polypropylene / noryl impeller ) up to 20 stages 1085 1 h.p. 1086 1.5 hp 1087 2 hp 1088 2.5 hp 1089 3.0 hp 1090 4.0 hp 1091 5.0 hp 1092 supply rate should be increased by rs 200 / per stage for pump with more than 20 stages 1093 submersible pump 150 mm dia ( with bronze impeller ) up to 8 stages 1094 1.5 hp 1095 2.0 hp 1096 3.0 hp 1097 4.0 hp 1098 5.0 hp 1099 6.0 hp 1100 7.5 hp 1101 supply rate should be increased by rs 600 / per stage for pump with more than 8 stages 1102 submersible pump 150 mm dia ( with bronze impeller ) up to 12 stages 1103 8.0 hp 1104 9.0 hp 1105 10.0 hp 1106 11.0 hp 1107 12.5 hp 1108 15.0 hp 1109 supply rate should be increased by rs 600 / per stage for pump with more than 12 stages 1110 submersible pump 150 mm dia ( with bronze impeller ) up to 20 stages 1111 17.5 hp 1112 20.0 hp 1113 25 hp 1114 1 ) supply rate should be increased by rs 600 / per stage for pump with more than 20 stages for bore well only. 1115 for other use 200 mm dia pump shall be preferred over 150 mm dia with more than 20 stage pump. 1116 2 ) for 150 mm dia energy efficient pumps add as below 1117 a. up to 8 stages : 3% on supply rate 1118 b. up to 12 stages : 4% on supply rate 1119 c. up to 15 stages : 5% on supply rate 1120 pressure gauge 1121 providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint 1122 pressure gauge ( 100 mm dia ) 1123 pressure gauge ( 150 mm dia ) 1124 vacuum / combination gauge 1125 supplying vacuum gauge / combination gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia g.i. pipe. 1126 vacuum / combination gauge – 100 mm dia 1127 vacuum / combination gauge – 150 mm dia 1128 lifting equipment 1129 chain pulley block 1130 supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark. 1131 1 tonne capacity 1132 2 tonne capacity 1133 3 tonne capacity 1134 hand operated circular or rectangular travelling crane ( single girder ) 1135 supplying single girder hand operated circular / rectangular travelling crane with 6 m lift complete with chain pulley block isi marked and travelling trolley both tested for 50% overload including arrangement for longitudinal travel / circular travel and cross travel with wheel, hand chain, etc complete. 1136 3 tonne capacity 1137 up to 5 m span 1138 above 5 m up to 6 m span 1139 above 6 m up to 8 m span 1140 5 tonne capacity 1141 up to 5 m span 1142 above 5 m up to 6 m span 1143 above 6 m up to 8 m span 1144 above 8 m up to 10 m span 1145 electric operated circular or rectangular travelling crane ( single girder ) 1146 supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block. 1147 5 tonne capacity 1148 above 6 m up to 8 m span 1149 above 8 m up to 10 m span 1150 7.5 tonne capacity 1151 above 6 m upto 8 m span 1152 above 8 m up to 10 m span 1153 10 tonne capacity 1154 above 6 m up to 8 m span 1155 above 8 m up to 10 m span 1156 square bar / rail 1157 providing, erecting and fixing square bar of en 8 as rail for over head crane on provided track, girder / continuous corbel beam, including supporting plate and “j” bolts. 1158 50 x 50 mm ( en 8 ) 1159 40 x 40 mm ( en 8 ) 1160 lightening arrester, ab switch, insulators 1161 lightening arrestor 1162 supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line. 1163 suitable for 11 kv supply, distribution class 1164 suitable for 22 kv supply, distribution class 1165 suitable for 33 kv supply, station class 1166 disc insulator 1167 supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm 1168 suitable for 11kv line 1169 suitable for 33kv line 1170 pin insulator 1171 supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm 1172 suitable for 11kv line 1173 suitable for 33kv line 1174 air break switch without earth switch 1175 supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps 1176 suitable for 11kv line 1177 rocking / tilting type 1178 rotating type 1179 suitable for 33kv line 1180 rocking / tilting type 1181 rotating type 1182 air break switch with earth switch 1183 supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps 1184 suitable for 11kv line 1185 rotating type 1186 suitable for 33kv line 1187 rotating type 1188 drop out fuse ( channel mounted ) 1189 supplying, erecting approved make out door type drop out fuse channel type with insulator complete with fuse holders fuse barrel with metal fittings, fuse element, with working current up to 50 amp, capacity complete erected on provided cross arm, each set comprising 3 units 1190 suitable for 11 kv line 1191 suitable for 33 kv line 1192 horn gap fuse ( channel mounted ) 1193 supplying, erecting approved make out door type horn gap type fuse with insulator, fuse element, with working current up to 50 amp, capacity complete erected on provided cross arm, each set comprising 3 units 1194 suitable for 11 kv line 1195 suitable for 33 kv line 1196 transformer 1197 power transformer ( with off load tap changer ) any isi mark 1198 supplying outdoor type copper wound transformer continuously rated for 3ph, 50 hz, at full load and temp. rise not exceeding 450 c by thermometer in oil and 500 c by the resistance in winding after continuous run at full load rating, the transformer should have oil immersed winding having vector group dy11, ht side connected in delta and lt side connected in star with neutral brought out connected to provide separate earthing. the transformer shall have power terminal arrangement, bushing / cable end box on ht side and cable end box on lt side. 2 nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. the transformer should have following standard fittings. transformer shall be latest manufacturing standards as per amended is specifications and the load & no load losses shall be limited to the values given below or as per is or norms issued by seb which ever are lower 1199 1.      oil conservator with filling hole with cap and plain oil level gauge. 1200 2.      silica gel dehydrating breather charged with silica gel. 1201 3.      oil drain valve 1202 4.      oil filter valve 1203 5.      lifting eyes / hooks 1204 6.      two earthing terminals 1205 7.      diagram and rating plate 1206 8.      air vent 1207 9.      explosion vent 1208 10.   100mm dia thermo meter with thermometer pocket 1209 11.   four bi directional plain roller. 1210 power transformer 11000 / 433 volts with off load tap changer – 12.5% to +2.5% in steps of 2.5% as per bis level 2. 1211 63 kva ( no load loss 180w and load loss 1235w ) 1212 100 kva ( no load loss 260w and load loss 1760w ) 1213 160kva ( no load loss 260w and load loss 1760w ) 1214 200kva ( no load loss 500w and load loss3000w ) 1215 250kvaa ( no load loss 550w and load loss3600w ) 1216 315kva ( no load loss 580w and load loss 4200w ) 1217 400 kva ( no load loss 715w and load loss 5000w ) 1218 500 kva ( no load loss 850w and load loss 5800w ) 1219 630 kva ( no load loss 1000w and load loss 7000w ) 1220 750 kva ( no load loss 1500w and load loss 8000w ) 1221 power transformer ( with on load tap changer ) 1222 supplying outdoor type copper wound transformer continuously rated for 3ph, 50 hz, at full load and temp. rise not exceeding 450 c by thermometer in oil and 500 c by the resistance in winding after continuous run at full load rating, the transformer should have oil immersed winding having vector group dy11, ht side connected in delta and lt side connected in star with neutral brought out connected to provide separate earthing. the transformer shall have power terminal arrangement, bushing / cable end box on ht side and cable end box on lt side. 2nos channels with stoppers shall be provided and fixed on the provided plinth for mounting the transformer. the transformer should have following standard fittings. the oltc should be suitable for minimum 50 operations per day. transformer shall be latest manufacturing standards as per amended is specifications and the load & no load losses shall be limited to the values given below or as per is or norms issued by seb which ever are lower 1223 1.      oil conservator with filling hole with cap and plain oil level gauge. 1224 2.      silica gel dehydrating breather charged with silica gel. 1225 3.      oil drain valve 1226 4.      oil filter valve 1227 5.      lifting eyes / hooks 1228 6.      two earthing terminals 1229 7.      diagram and rating plate 1230 8.      air vent 1231 9.      explosion vent 1232 10.   100mm dia thermo meter with thermometer pocket 1233 11.   four bi directional plain roller. 1234 12.   buchholz relay 1235 13.   resistance temp. detector 1236 14.   marshalling box 1237 15.   automatic voltage regulator ( avr ) 1238 16.   remote tap changing controller ( rtcc ) 1239 transformer 11000 / 433 volts with on load tap changer – 15% to +5% in steps of 1.25% with rtcc, avr and marshalling box and other specification as per bis level 2. 1240 750 kva 1241 1000 kva 1242 1250 kva 1243 1600 kva 1244 2000 kva 1245 motors 1246 foot mounted motors tefc 1500 rpm 1247 supplying foot mounted tefc 1500 rpm, squirrel cage induction motor, conforming to is 325 having continuous rating suitable for operation at 415 volts + / 10%, 3 phase, 50 hz + / 3% with “f” class insulation temperature rise limited to class “b” insulation. motors conform to is 12615 with efficiency level ie3 and provided with enclosure protection class ip 55. 1248 15 kw ( 20 hp ) 1249 18.5 kw ( 25 hp ) 1250 22 kw ( 30 hp ) 1251 30 kw ( 40 hp ) 1252 37 kw ( 50 hp ) 1253 45 kw ( 60 hp ) 1254 55 kw ( 75 hp ) 1255 75 kw ( 100 hp ) 1256 90 kw ( 120 hp ) 1257 110 kw ( 150 hp ) 1258 132kw ( 180hp ) 1259 160kw ( 215 hp ) 1260 250kw ( 335 hp ) 1261 foot mounted motor tefc 1500 rpm 1262 0.75 kw ( 1hp ) 1263 1.1   kw ( 1.5 hp ) 1264 1.5 kw ( 2 hp ) 1265 2.2 kw ( 3 hp ) 1266 3.7 kw ( 5 hp ) 1267 5.5 kw ( 7.5 hp ) 1268 7.5 kw ( 10 hp ) 1269 9.3 kw ( 12.5 hp ) 1270 11 kw ( 15 hp ) 1271 aluminium cable 1272 cable 1273 aluminium conductor three core, xlpe / pvc insulated & armoured cable . 1274 supplying xlpe / pvc insulated, armoured cable 1100 v grade with isi mark three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1275 3 core 2.5 sq mm 1276 3 core 4 sq mm 1277 3 core 6 sq mm 1278 3 core 10 sq mm 1279 3 core 16 sq mm 1280 3 core 25 sq mm 1281 3 core 35 sq mm 1282 3 core 50 sq mm 1283 3 core 70 sq mm 1284 3 core 95 sq mm 1285 3 core 120 sq mm 1286 3 core 150 sq mm 1287 3 core 185 sq mm 1288 3 core 240 sq mm 1289 3 core 300 sq mm 1290 3 core 400 sq mm 1291 aluminium conductor 3.5 core, xlpe / pvc insulated & unarmoured cable 1292 supplying xlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three and half core, stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1293 3.5 core 25 sq mm 1294 3.5 core 35 sq mm 1295 3.5 core 50 sq mm 1296 3.5 core 70 sq mm 1297 3.5 core 95 sq mm 1298 3.5 core 120 sq mm 1299 3.5 core 150 sq mm 1300 3.5 core 185 sq mm 1301 3.5 core 240 sq mm 1302 3.5 core 300 sq mm 1303 3.5 core 400 sq mm 1304 ht aluminium three core 3.3 kve cable xlpe insulated 1305 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1306 3 core 35 sq mm 1307 3 core 50 sq mm 1308 3 core 70 sq mm 1309 3 core 95 sq mm 1310 3 core 120 sq mm 1311 3 core150sq mm 1312 3 core 185 sq mm 1313 3 core 240sq mm 1314 3 core 300 sq mm 1315 3 core 400 sq mm 1316 ht aluminium three core 6.6 kv ( ue ) / 11kv e cable xlpe insulated 1317 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1318 3 core 35 sq mm 1319 3 core 50 sq mm 1320 3 core 70 sq mm 1321 3 core 95 sq mm 1322 3 core 120 sq mm 1323 3 core150sq mm 1324 3 core 185 sq mm 1325 3 core 240sq mm 1326 3 core 300 sq mm 1327 3 core 400 sq mm 1328 ht aluminium three core 11kv ( ue ) cable xlpe insulated 1329 supplying ht aluminium three core cable xlpe insulated , insulation screened with extruded semi conducting compound in combination with copper tape ( 0.3 ka for 1 sec. ) cores laidup inner sheath of pvc tape , galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is :7098 / ii / 85 with latest amendments 1330 3 core 35 sq mm 1331 3 core 50 sq mm 1332 3 core 70 sq mm 1333 3 core 95 sq mm 1334 3 core 120 sq mm 1335 3 core150sq mm 1336 3 core 185 sq mm 1337 3 core 240sq mm 1338 3 core 300 sq mm 1339 3 core 400 sq mm 1340 aluminium conductor three core, xlpe / pvc insulated & unarmoured cable . 1341 supplying xlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three core, solid / stranded aluminium conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1342 3 core 4 sq mm 1343 3 core 6 sq mm 1344 3 core 10 sq mm 1345 3 core 16 sq mm 1346 3 core 25 sq mm 1347 3 core 35 sq mm 1348 3 core 50 sq mm 1349 3 core 70 sq mm 1350 3 core 95 sq mm 1351 3 core 120 sq mm 1352 3 core 150 sq mm 1353 3 core 185 sq mm 1354 3 core 240 sq mm 1355 3 core 300 sq mm 1356 3 core 400 sq mm 1357 copper cable 1358 cable 1359 3 core pvc insulated, pvc sheathed copper conductor flat submersible cable . 1360 supplying , flat flexible submersible cable with, copper conductor, pvc insulated, and pvc sheathed . 1361 3 core 1.5 sq mm 1362 3 core 2.5 sq mm 1363 3 core 4 sq mm 1364 3 core 6 sq mm 1365 3 core 10 sq mm 1366 3 core 16 sq mm 1367 3 core 25 sq mm 1368 3 core 35 sq mm 1369 copper conductor three core, xlpe / pvc insulated & unarmoured cable . 1370 supplying xlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark three core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1371 3  core 1.5 sq mm 1372 3  core 2.5 sq mm 1373 3  core 4 sq mm 1374 3  core 6 sq mm 1375 3  core 10 sq mm 1376 3  core 16 sq mm 1377 3 core 25 sq mm 1378 3 core 35 sq mm 1379 3 core 50 sq mm 1380 3 core 70 sq mm 1381 3 core 95 sq mm 1382 copper conductor 3.5 core, xlpe / pvc insulated & armoured cable . 1383 supplying xlpe / pvc insulated, armoured cable 1100 v grade with isi mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1384 3.5 core 1.5 sq mm 1385 3.5 core 2.5 sq mm 1386 3.5 core 4 sq mm 1387 3.5 core 6 sq mm 1388 3.5 core 10 sq mm 1389 3.5 core 16 sq mm 1390 3.5 core 25 sq mm 1391 3.5 core 35 sq mm 1392 3.5 core 50 sq mm 1393 3 .5 core 70 sq mm 1394 3.5 core 95 sq mm 1395 3.5 core 120 sq mm 1396 3 .5 core150sq mm 1397 3.5 core 185 sq mm 1398 3.5 core 240sq mm 1399 3.5 core 300 sq mm 1400 3.5 core 400 sq mm 1401 copper conductor 3.5 core xlpe / pvc unarmoured 1402 supplying xlpe / pvc insulated, unarmoured cable 1100 v grade with isi mark 3.5 core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1403 3.5 core 25 sq mm 1404 3.5 core 35 sq mm 1405 3.5 core 50 sq mm 1406 3.5 core 70 sq mm 1407 3.5 core 95 sq mm 1408 3.5 core 120 sq mm 1409 3.5 core150sq mm 1410 3.5 core 185 sq mm 1411 3.5 core 240sq mm 1412 3.5 core 300 sq mm 1413 3.5 core 400 sq mm 1414 copper conductor three core, xlpe / pvc insulated & armoured cable . 1415 supplying xlpe / pvc insulated, armoured cable 1100 v grade with isi mark three core, solid / stranded copper conductor with 6 mm thick 25 mm width m.s. spacer with g.i. earth wire 6 sq mm, complete in an approved manner. 1416 3  core 1.5 sq mm 1417 3 core 2.5 sq mm 1418 3 core 4 sq mm 1419 3 core 6 sq mm 1420 3 core 10 sq mm 1421 3 core 16 sq mm 1422 3 core 25 sq mm 1423 3 core 35 sq mm 1424 3 core 50 sq mm 1425 3 core 70 sq mm 1426 3 core 95 sq mm 1427 3 core 120 sq mm 1428 3 core 150sq mm 1429 3core 185 sq mm 1430 3 core 240 sq mm 1431 3 core 300 sq mm 1432 3 core 400 sq mm 1433 foot valve 1434 foot valve 1435 supplying c.i. foot valve having single leather flap and gunmetal seating. valve shall be fixed on suction side of pump as per requirement including jointing material and hardware. 1436 flanged type 1437 50 mm 1438 65 mm 1439 80 mm 1440 100 mm 1441 125 mm 1442 150 mm 1443 air circuit breaker 1444 acb breaking capacity 50ka thermal magnetic manual draw out type 3 pole 1445 630a 1446 800a 1447 1000a 1448 1250a 1449 1600a 1450 2000a 1451 starter 1452 d.o.l. starter with ss enclosure with 380 / 415 volt coil 1453 7.5 h.p. 1454 10 h.p. 1455 supplying fully automatic star delta starter to operate induction motor working on 415v, 3phase, 50 hz with no volt coil, over load element, on off push buttons, with necessary materials and connected to supply, etc complete starter with original sheet steel encloser 1456 f.a.s.d starter 1457 10.0 h.p. 1458 15 h.p. 1459 20 h.p. 1460 25 h.p. 1461 35 h.p. 1462 40 hp 1463 50 hp 1464 75 h.p. 1465 100 h.p. 1466 125 h.p. 1467 150 h.p. 1468 250 h.p. 1469 servo controlled automatic voltage stabilizer 1470 providing, erecting servo controlled automatic voltage stabiliser suitable for out put voltage of 415 volt + / 1%, 3 ph, 50 hz, with copper wound transformer ( air / oil cooled ) as mentioned below. the stabilizer shall function satisfactorily even if incoming supply is unbalanced between phases within range of 10%. the stabilizer should be constructed in cubical box, with bidirectional wheels for easy handling, necessary monitors and users controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and out put voltage, auto / manual selector switch, raise / low push buttons etc. suitable capacity termination strips and bus bars for incoming and out going cable should be provided. all three phases shall be independently monitored and corrected. following protections and indications shall be incorporated 􀂌 over voltage / under voltage 􀂌 single phasing 􀂌 cut off contactor with electronic output sensing unit 1471 servo controlled automatic voltage stabiliser ( out put 415 + / 1% ) input 150 to 450 volt 1472 20 kva air cooled 1473 25 kva air cooled 1474 30 kva air cooled 1475 40 kva air cooled 1476 50 kva oil cooled 1477 60 kva oil cooled 1478 75 kva oil cooled 1479 100 kva oil cooled 1480 125 kva oil cooled 1481 servo controlled automatic voltage stabiliser ( out put 415 + / 1% ) input 280 to 460 volt 1482 15 kva air cooled 1483 20 kva air cooled 1484 25 kva air cooled 1485 30 kva air cooled 1486 40 kva air cooled 1487 50kva air cooled 1488 60 kva oil cooled 1489 75kva oil cooled 1490 100 kva oil cooled 1491 125 kva oil cooled 1492 150 kva oil cooled 1493 200kva oil cooled 1494 250kva oil cooled 1495 300 kva oil cooled 1496 400 kva oil cooled 1497 termination kit 1498 providing and errecting in door type termination kit, for 3.3kv / 6.6 kv / 11kv / 22kv / 33kv xlpe screened 3 core cable 1499 in door termination kit for 3.3kv ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1500 25 50 mm2 1501 70 120 mm2 1502 150 185 mm2 1503 240 400 mm2 1504 out door termination kit for 3.3 ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1505 25 50 mm2 1506 70 120 mm2 1507 150 185 mm2 1508 240 400 mm2 1509 straight through joint for 3.3kv ( e / ue ) / 6.6 kv ( e ) xlpe 3 core cable 1510 25 50 mm2 1511 70 120 mm2 1512 150 185 mm2 1513 240 300 mm2 1514 in door termination kit for 11kv ( e ) xlpe screened 3 core cable 1515 25 50 mm2 1516 70 120 mm2 1517 150 185 mm2 1518 240 400 mm2 1519 out door termination kit for 11kv ( e ) xlpe screened 3 core cable 1520 25 50 mm2 1521 70 120 mm2 1522 150 185 mm2 1523 240 400 mm2 1524 straight through joint for 11 kv ( e ) xlpe screened 3 core cable 1525 25 50 mm2 1526 70 120 mm2 1527 150 185 mm2 1528 240 300 mm2 1529 in door termination kit for 22kv ( e ) xlpe screened 3 core cable 1530 25 50 mm2 1531 70 120 mm2 1532 150 185 mm2 1533 240 400 mm2 1534 out door termination kit for 22kv ( e ) xlpe screened 3 core cable 1535 25 50 mm2 1536 70 120 mm2 1537 150 185 mm2 1538 240 400 mm2 1539 straight through joint for 22 kv ( e ) xlpe screened 3 core cable 1540 25 50 mm2 1541 70 95 mm2 1542 120 150 mm2 1543 185 240 mm2 1544 300 400 mm2 1545 in door termination kit for 33kv ( e ) xlpe screened 3 core cable 1546 25 50 mm2 1547 70 95 mm2 1548 120 185 mm2 1549 240 400 mm2 1550 out door termination kit for 33 kv ( e ) xlpe screened 3 core cable 1551 25 50 mm2 1552 70 95 mm2 1553 120 185 mm2 1554 240 400 mm2 1555 straight through joint for 33 kv ( e ) xlpe screened 3 core cable 1556 35 70 mm2 1557 95 150 mm2 1558 185 300 mm2 1559 400 mm2...

East Central Railway - Jharkhand

31947950 auction sale of disposal of ms scrap & non ferrous & plants item such as ( 1 ) hammers spiking qty=2nos.=5kg ( fe ) ( 2 ) pad lock g.i off size qty=2nos.=1.5kg ( fe ) ( 3 ) spanner s / e qty=4nos.=1.5kg ( fe ) ( 4 ) rail tongue qty=4nos.=36kg ( fe ) ( 5 ) cane measuring 5 ltr qty=1no.=1.2kg ( fe ) ( 6 ) rdso guage cum level qty=7nos.=12kg ( al ) ( 7 ) rail dolley qty=7nos.=301kg ( fe ) ( 8 ) beater steel qty=94nos.=299kg ( fe ) ( 9 ) phawarah qty=36nos.=51kg ( fe ) ( 10 ) wire basket qty=5nos.=15kg ( fe ) ( 11 ) umbrella trolley qty=1no.=3kg ( fe ) ( 12 ) crow bar qty=23nos.=156kg ( fe ) ( 13 ) bucket gi 3 gallon cap. qty=10nos.=23kg ( fe ) ( 14 ) rake ballast qty=211nos.=268kg ( fe ) ( 15 ) hand rakes qty=51nos.=37kg ( fe ) ( 16 ) soveure iron qty=1no.=1kg ( fe ) ( 17 ) trolley lamp qty=2nos.=1kg ( fe=0.10kg, fibre=0.90kg ) ( 18 ) digital non contact infrared thermometer qty=6nos.=1kg ( fe=0.10kg, fibre=0.90kg ) ( 19 ) h.s. lamp qty=6nos.=11kg ( fe ) ( 20 ) tri color torch qty=3nos.=2kg ( fe=0.15kg, fibre=1.85kg ) ( 21 ) walkie talkie charger knewood qty=1no.=1kg ( fe ) ( 22 ) 3 cell torch three color qty=11nos.=2kg ( fe ) ( 23 ) talwar qty=15nos.=3kg ( fe ) ( 24 ) walkie talkie charger hyt qty=1no.=0.40kg ( fe=0.20kg, fibre=0.20kg ) ( 25 ) ramm ci qty=1no.=6kg ( fe ) ( 26 ) rail thermometer qty=1no.=0.30kg ( fe ) ( 27 ) brush cutter qty=1no.=8kg ( fe ) ( 28 ) minor cap lamp with helmet qty=4nos.=3.50kg ( fe=0.50kg, fibre=3kg ) ( 29 ) abrashive rail cutter qty=1no.=30kg ( fe ) ( 30 ) r.d.s.o gauge qty=13nos.=33kg ( al ) ( 31 ) rail drill machine qty=1no.=68kg ( fe ) ( 32 ) spanner d / e 41x36 qty=5nos.=3kg ( fe ) ( 33 ) barrel pump qty=1no.=5.5kg ( fe ) ( 34 ) sprit level for gauge qty=11nos.=2kg ( brass ) ( 35 ) light weight spanner qty=16nos.=33kg ( fe ) ( 36 ) wheel for rail drolley qty=25nos.=125kg ( fe ) , lot no. 02 / tools & plants / crp / 21 22, location pwi store at crp. [ i ] loading by the labour of purchaser, [ ii ] delivery on the basis of number....