Central Coalfields Limited - Jharkhand

34034686 installation of bus bar arrangement using alloy aluminium pipe, painting of iron structure and stacking of sub station no. 02 with sand and stone under kathara colliery...

Jharkhand State Electricity Board - Jharkhand

33997683 supply of different type of electric line materials , electrical items : , aluminium pipe 40 mm dia , aluminium pipe connector , earthing g.i. strip for ( 65x6 ) mm , p.g clamp for 150 sq.mm conductor , p.g clamp for 100 sq.mm conductor , p.g clamp for 80 sq.mm conductor , gi wire no. 8 for , earthing ( chemical ) with g.iearthingpipe 40 mm3.1 mtrs long ( bentoniteasintermittent ) ( charcoal+salt layers ) , g.istay set complete ( 1900x20 ) mm with stay wire 7 / 10 swg 8 kgs & guy insulator , g.i wire no. 10 , g.ilt stay set complete ( 1700x16 ) mm with stay wire 7 / 12 swg , g.istay set complete for d / s / s with wire ( 1800x16 ) mm withstay wire , m / s nuts & bolts ( 2”x5 / 8 mm ) full thread , m / s nuts & bolts ( 3”x5 / 8 mm ) full thread , m / s nuts & bolts ( 5”x5 / 8 mm ) half thread , m / s nuts & bolts ( 8”x5 / 8 mm ) half thread , m / s nuts & bolts ( 10”x5 / 8 mm ) half thread , m / s nuts & bolts ( 12”x5 / 8 mm ) half thread , m / s nuts & bolts ( 14”x5 / 8 mm ) half thread , 11 kv earthing ( chemical ) with g.iearthing pipe 20 mm 1.2 mtrs long...

Jharkhand Bijli Vitran Nigam Limited - Jharkhand

33824379 tender for supply of materials clamp, ms channel, 33 kv pole top bracket, 33 kv back clamp for top breacket, 33 kv cross arm, ms base plate, back clamp, support clamp, back calmp, 33 kv angle stay clamp, 33 kv dp channel support, earth clamp, 11 kv pole top bucket, support clamp, 11 kv back clamp, support clamp for 11 kv v cross arm, aluminium pipe, aluminiu pipe connector, earthing gi strip, pg clamp, gi wire, 33 kv post insulator, 11 kv hg fuse, buckle strip etc....

Central Coalfields Limited - Jharkhand

32941939 erection of bus bar arrangement by alloy aluminum pipe, painting and erection of iron structure and stacking of substation yard with sand and stone at jharkhand 15 no. substation and dam colony substation of jocp under hazaribagh area ...

Building Construction Department - Jharkhand

32068192 public works department ( pwd ) is engaged in framing / revision of schedule of rates public works department ( pwd ) is engaged in framing / revision of schedule of rates m 014 brick 75a m 051 cold twisted bars ( hysd bars ) as per is:1786 2008 average rate m 054 corrosion resistant structural steel m 064 paint m 078 cement primer m 154 primer m 178 structural steel average rate m 182 tiles size 300 x 300 mm and 25 mm thick m 183 timber m 185 water based cement paint m 188 wooden ballies 2 dia for bracing m 189 wooden ballies 8 dia and 9 m long ( 9 m @ rs. 43.00 / m ) m 190 wooden packing m 191 wooden staff for fastening of flag 25 mm dia, 1.0 m long m 196 ( a ) 75b brick ( b ) fly ash lime bricks ( falg ) brick conforming to is 12894 1990 ( 9 x 4.5 x 3 ) 100 a at source ( c ) brick tiles ( 300mm x 150 mmx 50 mm ) ( d ) picket jhama brick ( e ) jhama khoa / metal ( f ) bangla bhattas brick of size 9 3 / 4 x 4 3 / 4 x 2 3 / 4 ( 248 mm x121 mm x 70 mm ) inclusive of royalty but exclusive of gst . ( 1 ) 75 b ( 2 ) jhama bricks note : in areas where bricks manufacture are of less size, the rate may be derived by reducing the rate in item [ 271 ( d ) & ( f ) ] in proportion of the bricks rounding to nearest rs. 5.00 m 198 bricks bats at kiln site m 199 rough dressed stone boulder for masonry works. m 200 seasonel sal wood scantling m 201 sal planks : ( i ) 25 mm to 40 mm ( ii ) 12 mm to 20 mm m 202 teak wood : ( i ) scantling ( ii ) planks 25 mm to 40 mm ( iii ) planks 12 mm to 20 mm m 203 sisum wood ( i ) scantling ( ii ) planks 25 mm to 40 mm ( iii ) planks 12 mm to 20 mm m 204 seasoned gamhar wood scantling ( local ) m 205 local wood ( i ) scantling ( ii ) planks 25 mm to 40 mm ( iii ) planks 12 mm to 20 mm m 206 bamboo ( i ) 75 mm dia 6 m long to 8 m long ( ii ) 100 mm dia 6 m long to 8 m long ( iii ) 50 mm dia hill bamboo m 207 sal ballah post ( i ) 100 mm dia ( ii ) 125 mm dia ( iii ) 150 mm dia m 208 butt hinges as per clause 562 of building specification of building construction deptt. of size. ( i ) 75 mm ( ii ) 100 mm m 209 ( i ) teak ply 4 mm thick ( ii ) teak ply 6 mm thick m 210 ply wood ( national or equivalant make ) ( i ) 25 mm thick ( ii ) 19 mm thick ( iii ) 12 mm thick ( iv ) 6 mm thick m 211 orinary commercial ply ( i ) 3 mm thick ( ii ) 4 mm thick ( iii ) 6 mm thick m 212 ( i ) sun mica best quality ( ii ) formica ( 1 mm ) m 215 barbed wire of 4 point, 2 ply 12 swg, 150 mm apart m 217 welded mesh ( 8 to 10 swg ) 100 to 125 mm square size m 218 c.a. sheet ( i ) corrugated 6 mm thick 1.5 m to 3.05 m long. ( ii ) ( a ) plain 6 mm thick 2.4 m to 3.05 m long ( b ) plain 4 mm do ( iii ) c.a. ridge, valley 1 m long ( plain wing adjustable ) ( iv ) corrugated adjustable ridge m 219 l drop 16 mm dia 300 mm long ( as per 5.6.5 of building specification of bcd ) with screw and all fittings. ( i ) aluminum ( ii ) iron ( copper oxidized ) m 220 d handle iron, proper oxidized as per clause 5.6.7 of building specification of b.c.d. ( i ) 150 mm long ( ii ) 125 mm long ( iii ) 100 mm long m 221 d handle made of 16 mm wide and 6 mm thick aluminum flat. ( i ) 150 mm long and 10 mm dia ( ii ) 100 mm long and 10 mm dia m 222 aluminum pipe of 18 gauge ( i ) 12 mm dia ( ii ) 16 mm dia ( iii ) 20 mm dia m 223 iron nails ( i ) 125 mm and below ( ii ) above 125 mm ( iii ) glass clip of wire m 224 mild steel copper oxidized tower bolt as per clause 5.6.6 of building specification of b.c.d 10 mm dia, complete set. ( i ) 100 mm long ( ii ) 150 mm long ( iii ) 200 mm long ( iv ) 225 mm long ( v ) 300 mm long ( vi ) 450 mm long ( vii ) 600 mm long m 225 aluminum tower bolt as per clause 5.6.6 of buillding specification of b.c.d. top quality, 10 mm dia ( i ) 100 mm long ( ii ) 120 mm long ( iii ) 150 mm long ( iv ) 200 mm long ( v ) 225 mm long ( vi ) 300 mm long m 226 screw ( n.f ) ( i ) 75 mm size ( ii ) 60 mm size ( iii ) 50 mm size ( iv ) 40 mm size to 30 mm size ( v ) below 30 mm to 12 mm size m 227 varnish standard make m 228 sprit m 229 ( i ) primer for wood work ( ii ) primer for steel work m 230 shaliltex board ( for use as per expansion joint i.s. 1838 1938 filter ) ( i ) 25 mm thick ( ii ) 18 mm thick ( iii ) 12 mm thick m 231 shalitex primer m 232 double boiled llinseed oil m 233 ( a ) aluminum paint standard make ( b ) synthetic enamel ( isi mark ) m 235 plastic emulsion paint m 236 dry distemper m 237 oil bound distemper m 238 snowcem powder m 239 ( i ) cicko powder / inpermo waterproofing comp ) ( ii ) cicko liquid m 240 robin blue m 241 color for wash m 242 whitening m 243 putty m 244 blackening powder m 245 ( i ) 1st quality paint of different shades ( ii ) 2nd quality paint m 246 wax polish ( 1 lit = 0.50 kg ) m 247 french polish standard make m 249 cotton m 250 ram raj m 251 shellex m 252 narial coir string m 253 narial rope 20 mm to 25 mm dia. m 254 sutli m 255 sabey string m 256 cotton string m 257 raniganj tiles m 258 ridge for above m 259 naria tiles 225 mm to 250 mm m 260 ridge for above or mungra m 261 narial rope above 25 mm dia m 262 thatching grass in bundle ( consisting of small & average length of grass 2.75 m ) bundle m 263 oxalic acid ( 1 lit. = 1 kg ) m 264 iron clamp ( 460 mm x 40 mm x 6 mm ) m 265 rolling shutter 1.02 mm thick m 266 shalimar tarphelt bh ( type ii group 1 ) m 267 ( a ) sun glass ( modi ) ( b ) plane glass panes ( i ) 2 mm thick ( ii ) 3 mm thick ( iii ) 4 mm thick ( iv ) 6 mm thick ( c ) pin hammered glass ( i ) 3 mm thick ( ii ) 4 mm thick ( iii ) 5 mm thick ( d ) 20 mm wide 4 mm thick glass strip for flooring m 268 hessian cloth ( 0.3 kg / m2 cot. ) m 269 gunny best quality m 270 limpet washer m 271 bitumen washer m 272 plaster of peris m 273 g.i. hook 150 mm to 10 mm dia m 274 ( i ) 25 mm x 6 mm nuts & bolts ( ii ) 16 mm x 3.75 mm nuts & bolts ( iii ) 10 mm x 3.75 mm nuts & bolts m 275 ( i ) fly proof wire netting ( 18 gauge wire with 12 16 nos, mesh per m2 ) ( ii ) fly proof wire netting ( light gauge ) m 276 turpentine oil m 277 manson polish m 278 carborandum stones ( 4, 6, 8 & 10 nos ) m 279 lime rubbish m 280 slack coal grade c ( steam ) long flame m 281 flush door ( hot pressed adhesive conforming to 2202 part 1 ) i.s. ( i ) 25 mm thick ( a ) both side commercial ( b ) one side teak ( c ) both side teak ( ii ) 32 mm thick ( a ) both side commercial ( b ) one side teak ( c ) both side teak ( iii ) 38 mm thick ( a ) both side commercial ( b ) one side teak ( c ) both side teak m 282 ( a ) looking eye piece best quality m 283 fevicol / ktcat / vamicol m 284 boat spike ( 300 400 mm long ) m 285 kotah stone tiles ( 15 mm 23 mm ) thick ( i ) 300 mm x 300 mm ( ii ) 375 mm x 375 mm ( iii ) 450 mm x 450 mm m 286 white makrana marble stone 20 mm thick ( i ) 300 mm x 300 mm and below ( ii ) 300 mm x 600 mm and above m 287 white glazed tiles 6 mm thick ( 150 x 150 mm size ) m 288 commercial grade colour ceramic wall / floor tiles ( as per is 13712 ) ( i ) 150 mm x 150 mm ( ii ) 300 mm x 300mm ( iii ) 300 mm x 450mm ( iv ) 300mm x 600mm m 289 dholpur tiles 15 mm x 23 mm thick ( i ) 275 mm x 275 mm to 300 mm x 600 mm ( ii ) 300 mm x 900 mm ( iii ) 600 mm x 1200 mm m 290 mosaic / tarrazo tiles 20 mm thick in ordinary cement base. m 291 mosaic / tarrazo tiles 20 mm thick in white cement base. m 292 slacked stone lime m 293 unslacked stone lime m 294 colour pigment for cement : ( i ) red ( ii ) black ( iii ) green ( iv ) blue m 295 marble dust ( daltonganj ) m 296 marble chips ( i ) dehradoon ( ii ) daltanganj m 297 marble chips coloured daltonganj m 298 commercial particle board interior ( i ) 12 mm ( 600 mm x 600 mm ) size ( ii ) 25 mm ( 600 mm x 600 mm ) size m 299 particle board exterior ( 600 mm x 600 mm size ) ( i ) 12 mm ( ii ) 25 mm m 302 ( a ) 100 mm dia c.a. pipe ( b ) 100 mm dia c. bend m 384 paint ( synthetic enamel ) m 1074 vitrified floor tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 15622 of approved make in all colours and shades.parking tiles ( industrial tiles ) m 1075 vitrified tiles tread of stairs of size 1200x300x15mm thick with water absorption less then 0.08% and conforming to is 15622of approved make in all colours and shades.size of tile 1200x300 mm for tread of stairs. m 1076 double charged vitrified floor tiles of size 600x600mm thick with water absorption less then 0.08% and conforming to is 15622 / iso 13006 of approved make in all colours and shades. m 1077 vitrified cool roof tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 154557 2007 / 1501 3006 of approved make in all colours and shades. m 1078 vitrified floor tiles of size 800x800mm with water absorption less then 0.08% and conforming to is 154557 2007 / 1501 3006 of approved make in all colours and shades. m 1079 vitrified floor tiles of size 1000x1000mm with water absorption less then 0.08% and conforming to is 154557 2007 / 1501 3006 of approved make in all colours and shades. m 1080 polysulphide ( poring grade ) ;density =1.65 gm / cc m 1081 polymer modified cementation coating m 1082 fibre glass cloth m 1083 chequered tiles cement concrete base 300x300x25mm m 1084 chequered tiles cement concrete base 300x300x40mm m 1085 brass screws 30 mm m 1086 plastic sleeves for screw m 1087 chromium plated brass screws 40 mm m 1088 chromium plated brass screws 30 mm m 1089 chromium plated brass screws 25 mm m 1090 chromium plated brass screws 20 mm m 1091 bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm m 1092 bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm m 1093 nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide m 1094 bright finished or black enameled mild steel screws 40 mm m 1095 bright finished or black enameled mild steel screws 25 mm m 1096 bright finished or black enameled mild steel screws 20 mm m 1097 bright finished or black enameled mild steel bolts and nuts 50x6 mm m 1098 oxidised mild steel butt hinges 125x65x2.12 mm m 1099 oxidised mild steel butt hinges 100x58x1.90 mm m 1100 oxidised mild steel butt hinges 75x47x1.70 mm m 1101 oxidised mild steel butt hinges 50x37x1.50 mm m 1102 oxidised mild steel parliamentary hinges 150x125x27x2.8 mm m 1103 oxidised mild steel parliamentary hinges 125x125x27x2.8 mm m 1104 oxidised mild steel parliamentary hinges 100x125x27x2.8 mm m 1105 oxidised mild steel parliamentary hinges 75x100x20x2.24 mm m 1106 oxidised mild steel sliding door bolt 300x16 mm m 1107 oxidised mild steel sliding door bolt 250x16 mm m 1108 oxidised mild steel tower bolt ( barrel type ) 250x10 mm m 1109 oxidised mild steel tower bolt ( barrel type ) 200x10 mm m 1110 oxidised mild steel tower bolt ( barrel type ) 150x10 mm m 1111 oxidised mild steel tower bolt ( barrel type ) 100x10 mm m 1112 oxidised mild steel handles 125 mm m 1113 oxidised mild steel handles 100 mm m 1114 oxidised mild steel handles 75 mm m 1115 oxidised mild steel screws 50 mm m 1116 oxidised mild steel screws 40 mm m 1117 oxidised mild steel screws 30 mm m 1118 oxidised mild steel screws 25 mm m 1119 oxidised mild steel screws 20 mm m 1120 anodised aluminium butt hinges 100x75x4 mm m 1121 anodised aluminium butt hinges 75x45x3.2 mm m 1122 anodised aluminium sliding door bolt 300x16 mm m 1123 anodised aluminium sliding door bolt 250x16 mm m 1124 anodised aluminium tower bolt ( barrel type ) 300x10 mm m 1125 anodised aluminium tower bolt ( barrel type ) 250x10 mm m 1126 anodised aluminium tower bolt ( barrel type ) 200x10 mm m 1127 anodised aluminium tower bolt ( barrel type ) 150x10 mm m 1128 anodised aluminium tower bolt ( barrel type ) 100x10 mm m 1129 anodised aluminium handles 125 mm with plate 175 x 32 mm m 1130 anodised aluminium handles 100 mm with plate 150 x 32 mm m 1131 anodised aluminium handles 75mm with plate 125 x 32 mm m 1132 anodised aluminium kicking plate 50 cm long 100x3.15 mm m 1133 exterior primer m 1134 black japan paint m 1135 superior copal varnish m 1136 oil type wood preservative m 1137 putty for wood work m 1138 plug m 1139 black colour dark shade pigment m 1140 red, chocolate, orange, buff or yellow ( red oxide of iron ) light shade pigment m 1141 green or blue medium shade pigment m 1142 ball bearing for rolling shutters m 1143 galvanised steel plain sheets m 1144 mild steel round bar 12 mm dia and below m 1145 structural steel such as tees, angles channels and r.s. joists m 1146 flats up to 10 mm in thickness m 1147 flats exceeding 10 mm in thickness m 1148 mild steel rivets m 1149 galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots m 1150 bolts and nuts up to 300 mm in length m 1151 bolts and nuts above 300 mm in length m 1152 superior class teak wood such as dandeli, balarshah or malabar in planks m 1153 first class teak wood in planks m 1154 second class teak wood in planks m 1155 second class deodar wood in planks m 1156 sal wood in scantling m 1157 precast heat resistant terrace tiles ( size 300x300 mm ) and 20 mm thick m 1158 g.i. plain washer thick m 1159 water proofing materials m 1160 welding by electric plant m 1161 20 mm dia holding down bolts m 1162 steel weld mesh m 1163 18 mm thick flamed finish granite stone slab m 1164 18 mm thick italian marble stone slab, perlato ( slab area up to 0.5 sqm ) . m 1165 commercial lpg in cylinder m 1166 surface box for stop cock m 1167 8 mm dia c.p. brass / s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c. m 1168 vitreous china pedestal for wash basin m 1169 flush pipe with union spreaders and clamps all in c.p. brass for single stall m 1170 flush pipe with union spreaders and clamps all in c.p. brass for double stall m 1171 stoneware pipes grade a ( 60 cm long ) 100 mm dia m 1172 white plastic seat ( solid ) with lid c.p. brass hinges and rubber buffers m 1173 black plastic seat ( solid ) with lid c.p. brass hinges and rubber buffers m 1174 c.i. trap for standard urinal with vent arm with operating and other couplings in c.p. brass: 50 mm dia m 1175 float glass panes of nominal thickness 4 mm ( weight not less than 10 kg / sqm ) m 1176 float glass panes of nominal thickness 5 mm ( weight not less than 12.50 kg / sqm ) m 1177 float glass panes of nominal thickness 8 mm ( weight not less than 20.00 kg / sqm ) m 1178 anodised aluminium hanging type door stopper m 1179 anodised aluminium pull bolt lock ( locking bolt ) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete m 1180 anodised aluminium casement stay 250 mm m 1181 pre laminated both side solid foam upvc profile ( 45x20mm ) m 1182 solid foam upvc sheet 20mm thick pre laminated on both side m 1183 pvc edge beading m 1184 expandable fastner with plastic sleeve m 1185 weather / structural non sag elastomeric pu sealant ( 600ml sausage ) for joints in rcc / brick / stone / wood / ceramic / gypsum / alluminium work complying to astm c920, din 18540 f & iso 11600 incl all taxes m 1186 structural sealant 6 mm x 12 mm m 1187 spacer tape 6.4 mm thick x 6 mm wide m 1188 weather sealant non staining ( 600 ml ) m 1189 weather sealant normal ( 300 ml ) m 1190 ms brackets / aluminium alloy brackets m 1191 silicon gasket in kg ( above 50 g / m ) m 1192 epdm gasket in kg ( above 60 g / m ) m 1193 anchor fastner m10 m 1194 ss bolt with washer of different sizes for structural glazing / acp cladding m 1195 ss screws of sizes for structural glazing / acp cladding m 1196 protective tape m 1197 gi flashing 1.2 mm thick m 1198 6 mm thick high performance glass m 1199 6 mm thick clear heat strengthened glass m 1200 6 mm thick clear heat strengthened glass m 1201 arms gs hd top hung 20 type p couple m 1202 connection block for vision glass panel m 1203 curtain wall striker for vision glass panel m 1204 adjustable fastening pawl for vision glass panel m 1205 corner drive for vision glass panel m 1206 top wedge block for vision glass panel m 1207 baker rod m 1208 fire stop m 1209 600x120 mm glass shelf with anodised aluminium angle frame, c.p. brass brackets and guard rail of standard size m 1210 galvanized iron ( 1.6 ± 0.2 mm ) thick reinforcement for big series casement window / door frame, sash, mullion, big & small series sliding window frame m 1211 galvanized iron ( 1.6 ± 0.2 mm ) thick reinforcement for big series sliding window / door sash m 1212 g.i fasteners 100 x 8 mm m 1213 stainless steel ( grade 304 ) hollow section round / square tubes m 1214 stainless steel bolts / square bar and plates m 1215 pressed steel door frames ( mild steel sheet 1.60 mm ) profile b m 1216 pressed steel door frames ( mild steel sheet 1.60 mm ) profile c m 1217 pressed steel door frames ( mild steel sheet 1.60 mm ) profile e m 1218 mild steel tubes hot finished welded type m 1219 mild steel tubes hot finished seamless type m 1220 mild steel tubes electric resistant or induction butt welded m 1221 circular c.i. box for ceiling fan internal dia 140 mm, 73 mm height, toplid of 1.5mm thick ms sheet m 1222 red oxide zinc chromate primer m 1223 brass 100mm mortice latch and lock with 6 levers without pair of handles m 1224 pair of anodised aluminium lever handles for 100 mm mortice latch and lock m 1225 12.5 mm thick tapered edge plain gypsum plaster borad confirming to is 2095 ( part i ) : 2011 m 1226 galvanised steel ceiling section ( size 80x26x0.50 mm ) m 1227 galvanised steel perimetre channel ( size 20x27x30x0.50 mm ) m 1228 galvanised steel intermediate channel ( size 15x45x15x0.90 mm ) m 1229 galvanised steel angle hanger ( celling angle ) ( size 25x10x0.50 mm ) m 1230 galvanised steel connecting clips ( 2.64 mm dia and 230 mm long gi wire ) m 1231 galvanised steel soffit cleat ( size 27x37x25x0.60 mm ) m 1232 joint filler m 1233 joint finisher m 1234 joint tape roll m 1235 all drive screws ( for gypsum board ) m 1236 primer ( for gypsum board ) m 1237 chlorpyriphos 20% e.c. / lindane 20% e.c. m 1238 acid proof cement m 1239 self tapping pan head nickel coated mild steel screws of size 13 x3.2 mm m 1240 fibre joint tape 50 mm wide ( 90 metre ) roll m 1241 12.5 mm thick fully perforated gypsum board m 1242 galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm m 1243 12.5 mm thick tapered edge moisture resistant plain gypsum plaster board confirming to is 2095 ( part i ) : 2011 m 1244 nickel plated m.s. pipe 25 mm dia m 1245 nickel plated m.s. pipe 20 mm dia m 1246 nickel plated m.s. brackets for curtain rod 20 mm m 1247 nickel plated m.s brackets for curtain rod 25 mm m 1248 oxidised mild steel screws 35 mm m 1249 rawl plug 50 mm ( designation 10 nos ) m 1250 aluminium tee channel ( heavy duty ) with rollers and stop end m 1251 aluminium hanging floor door stopper with twin rubber & stopper m 1252 hydraulic door closer tubular type aluminium section body m 1253 chequered precast cement concrete tiles 22 mm thick using marble chips of size 6mm light shade using white cement m 1254 acid and alkali resistant tiles 300x300 mm size, 10 mm thick m 1255 stainless steel kitchen sink with drain board 510 x 1040 mm bowl depth 200 mm m 1256 stainless steel kitchen sink without drain board 610x510 mm bowl depth 200 mm m 1257 coloured ( other than black ) solid p.v.c. seat in european w.c. pan m 1258 circular shape 450 mm dia mirror with plastic moulded frame m 1259 rectangular shape 453x357 mm mirror with plastic moulded frame m 1260 oval shape 450x350 mm ( outer dimensions ) mirror with plastic moulded frame m 1261 rectangular shape 1500x450 mm mirror with plastic moulded frame m 1262 hard board 6 mm thick m 1263 flexible ( coil shaped ) pvc waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i / c pvc waste fittings m 1264 flexible ( coil shaped ) pvc waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i / c pvc waste fittings m 1265 u pvc pipes ( working pressure 4 kg / cm² ) single socketed pipe 75 mm dia m 1266 u pvc pipes ( working pressure 4 kg / cm² ) single socketed pipe 110 mm dia m 1267 u pvc pipes ( working pressure 4 kg / cm² ) rubber ( seal ) ring 75 mm dia m 1268 u pvc pipes ( working pressure 4 kg / cm² ) rubber ( seal ) ring 110 mm dia m 1269 upvc coupler for upvc drainage pipes 75 mm m 1270 upvc coupler for upvc drainage pipes 110 mm m 1271 upvc pushfit coupler ( single ) 75 mm thick m 1272 upvc pushfit coupler ( single ) 110 mm thick m 1273 upvc single equal tee ( without door ) 75x75x75 mm m 1274 upvc single equal tee ( without door ) 110x110x110 mm m 1275 upvc single equal tee ( with door ) 75x75x75 mm m 1276 upvc single equal tee ( with door ) 110x110x110 mm m 1277 upvc bend 87.5° 75 mm bend m 1278 upvc bend 87.5° 110 mm bend m 1279 upvc plain shoe 75 mm bend m 1280 upvc plain shoe 110 mm bend m 1281 upvc pipe clip 75 mm bend m 1282 upvc pipe clip 110 mm bend m 1283 precast chequered cement tiles 22 mm thick dark shade using ordinary cement m 1284 precast chequered cement tiles 22 mm thick medium shade using 50% white cement 50% ordinary cement m 1285 epoxy paint m 1286 melamine polish m 1287 table rubbed polished stone 18mm thick ( 75x50cm ) granite stone 18 mm thick m 1288 pressed clay tiles 20mm thick 250x250 mm size m 1289 glass wool 50 mm thick m 1290 granite of any colour, 18 mm thick ( slab area above 0.50 sqm ) m 1291 aluminium t or l sections m 1292 double coupler m 1293 12 mm m.s. u beading m 1294 p.v.c. automatic flushing cistern 5 litre capacity m 1295 glass reinforced gypsum ( grg ) plaster board 12.5 mm thick confirming to is 2095 ( part 3 ) : 1996 m 1296 galvanised m.s. sheet 0.5 mm thick pressed channel section of size 50x32 mm m 1297 galvanised m.s. sheet 0.50 mm thick pressed stud : 48x34x36 mm m 1298 white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556 m 1299 12 mm dia 50 mm long wedge type expanded zinc alloy dash fastener m 1300 spigot for standard jointing m 1301 dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt m 1302 anodising 15 microns on aluminium sections m 1303 epdm gasket for upvc window / door m 1304 anodising 25 microns on aluminium sections m 1305 powder coating 50 microns on aluminium sections m 1306 polyester powder coating 50 microns on aluminium sections m 1307 double action hydraulic floor spring with stainless steel cover plate m 1308 6 mm dia g.i. adjustable hangers including clips ( up to 1.2 m length ) m 1309 double action hydraulic floor spring with brass cover plate m 1310 base jack m 1311 challies m 1312 cup locks m 1313 prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded ( medium density ) grade i, type ii conforming to is : 12823 ( exterior grade ) 12 mm thick m 1314 prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded ( medium density ) grade i, type ii conforming to is : 12823 ( exterior grade ) 12 mm thick m 1315 pvc blind pipe 150 mm dia as per is: 12818 m 1316 pvc blind pipe 200 mm dia as per is: 12818 m 1317 pvc slotted pipe 150 mm dia as per is: 12818 m 1318 pvc slotted pipe 200 mm dia as per is: 12818 m 1319 upvc blind pipe 100 mm dia as per is: 12818 m 1320 upvc slotted pipe 100 mm dia as per is: 12818 m 1321 epoxy m 1322 sbr polymer m 1323 acrylic polymer chemical for cracks m 1324 24 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish m 1325 30 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish m 1326 48mmx40mmx1.5mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish m 1327 upvc extruded ( small series ) casement window frame size 47x50mm m 1328 upvc extruded ( small series ) casement window sash / window mullion size 47x68 mm m 1329 upvc extruded glazing bead of appropriate dimension for small series casement window sash m 1330 upvc extruded glazing bead of appropriate dimension for big series of sliding window / door sash m 1331 upvc extruded ( big series ) 3 track sliding window / door frame size 116x45mm m 1332 upvc extruded ( small series ) 2 track sliding window sash / 3 track sliding window sash size 32x60mm m 1333 upvc extruded ( big series ) 2 track sliding window sash size 46x62mm m 1334 upvc extruded ( big series ) 3 track sliding window sash size 46x62mm m 1335 upvc extruded interlock of appropriate dimension for small series sliding window sash m 1336 upvc extruded interlock of appropriate dimension for big series sliding window / door sash m 1337 upvc extruded inline adaptor of appropriate dimension for big series sliding window / door sash m 1338 upvc extruded 2 track sliding door sash / 3 track sliding door sash ( big series ) size 46x82mm m 1339 a.p.p. modified 3 mm thick membrane reinforced with polyester matt m 1340 bitumen primer for bitumen membrane m 1341 geotextile 120 grams per sqm membrane m 1342 stainless steel screws 50 mm m 1343 stainless steel screws 40 mm m 1344 concealed zinc coated hinges 19 20 mm thick with mounting plate m 1345 acrylic exterior paint m 1346 premium acrylic exterior paint m 1347 textured exterior paint m 1348 galavanised ms 8 mm outer diameter m 6 dash fastener 50mm long m 1349 g.i main runner 15 x32 mm of 3000 mm length, 0.33 mm thick m 1350 g.i cross t 15 x32 mm of 1200 mm length, 0.33 mm thick m 1351 15 mm thick, light weight, integral densified micro look edged, false ceiling tiles of size 595x595 mm. m 1352 15 mm thick, light weight, fully perforated square / butt edge integral densified, false ceiling tiles of size 595x595 mm. m 1353 powder coated steel section main t ceiling sections 15x42x0.40 mm ( 3000 mm long ) m 1354 galvanized mild steel perimeter wall angle 22x19x0.40 mm ( 3000mm long ) m 1355 powder coated galvanised iron intermediate cross t section 15x42x0.40 mm ( 1200 mm long ) m 1356 powder coated galvanized iron intermediate cross t section 15x42x 0.40mm ( 600 mm long ) m 1357 12 mm thick micro tegular edged semi perforated grg ( glass fibre reinforced gypsum ) false celing tiles of size 595x595 mm m 1358 12 mm thick micro tegular edged fully perforated grg ( glass fibre reinforced gypsum ) false celing tiles of size 595x595 mm m 1359 galvanized iron intermediate cross t section 15x32x0.33 mm ( 600mm long ) m 1360 galavanised ms hanger rod 6mm dia ms fully threaded up to 1000mm length m 1361 calcium silicate tegular edged celling tiles 595x595 mm and 15 mm thick on edges m 1362 galvanised steel main tee ceiling section size 24x38x0.33 mm ( 3 metre long ) m 1363 galvanised steel perimeter wall angle size 24 x 24 x 0.40 mm ( 3.00 metre long ) m 1364 galvanised steel intermediate cross t section size 24 x 25 x 0.33mm ( 1.2 metre long ) m 1365 galvanised steel intermediate cross t section size 24 x 25 x 0.33mm ( 0.6 metre long ) m 1366 galvanised ms 8mm outer diameter m 6 dash fastener 25mm long m 1367 gi metal tile lay in plain tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick m 1368 gi metal tile lay in perforated tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick m 1369 pvc laminated gypsum tiles ( square edge ) of size 595x595 mm and 12.5 mm thick m 1370 gypsum tiles fully perforated square edge of size 595x595 mm and 12.5 mm thick m 1371 main t ceiling sections 24x38x0.3 mm ( 3 metre long ) m 1372 perimeter wall angle 24 x 24 x 0.3 mm ( 3 metre long ) m 1373 intermediate cross t section 24x25x0.3 mm ( 1.2 m long ) m 1374 intermediate cross t section 24x25x0.3 mm ( 0.6 m long ) m 1375 hanger rod 4 mm thick m 1376 adjustment clip 85x30x0.8 mm m 1377 soffit cleat ( size 27x37x25x1.60 mm ) m 1378 galavanised ms l shape level adjuster of size 85x25x2 mm m 1379 vitrified floor tile 50x50 cm conforming to is 15622:2006 group ( b1a ) m 1380 border tiles 200x75mm size m 1381 chlorinated polyvinyl chloride ( cpvc ) pipe 15 mm outer dia m 1382 chlorinated polyvinyl chloride ( cpvc ) pipe 20 mm outer dia m 1383 chlorinated polyvinyl chloride ( cpvc ) pipe 25 mm outer dia m 1384 chlorinated polyvinyl chloride ( cpvc ) pipe 32 mm outer dia m 1385 chlorinated polyvinyl chloride ( cpvc ) pipe 40 mm outer dia m 1386 chlorinated polyvinyl chloride ( cpvc ) pipe 50 mm outer dia m 1387 chlorinated polyvinyl chloride ( cpvc ) pipe 62.5 mm inner dia m 1388 chlorinated polyvinyl chloride ( cpvc ) pipe 75 mm inner dia m 1389 chlorinated polyvinyl chloride ( cpvc ) pipe 100 mm inner dia m 1390 chlorinated polyvinyl chloride ( cpvc ) pipe 150 mm inner dia m 1391 weather silicon sealant m 1392 stainless steel screws 30 mm x4 mm m 1393 masking tape m 1394 autoclaved aerated cement ( aac ) blocks m 1395 aluminium casement window fastener ( anodised ac 15 ) m 1396 aluminium casement window fastener ( powder coated ) m 1397 aluminium casement window fastener ( polyester powder coated ) m 1398 stainless steel screws 25 mm x4 mm m 1399 precoated galvanised iron profile sheet 0.50 mm tct m 1400 precoated galvanised steel plain ridges 0.50 mm tct and 500 600mm wide m 1401 precast c.c. kerb stone m 25 m 1402 interlocking c.c. paver block ( 60 mm thick, m 30 ) m 1403 punched tape concertina coil 600 mm dia 10 m openable length ( total length 90 m ) m 1404 rbt reinforced barbed wire m 1405 turn buckle and strengthening bolt m 1406 chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm m 1407 chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm, pvc coated to outer dia 5 mm m 1408 chain link fabric fencing mesh of size 25x25 mm made of g.i. wire of dia 3 mm m 1409 stainless steel cramps ( weight 260 grams ) with nuts, bolts and washer for dry stone cladding m 1410 telescopic drawer channels 300 mm long m 1411 stainless steel roller for sliding arrangement in racks / cupboards / cabinets shutter m 1412 50 mmx42 mmx2 mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish m 1413 25 mm thick factory made pvc flush door shutter i / c carriage m 1414 magnetic catcher triple strip vertical type m 1415 magnetic catcher double strip horizontal type m 1416 100 mm mortice lock with 6 levers for aluminium door m 1417 high polymer modified quickset tile adhesive m 1418 stainless steel wire guage ( grade 304 ) aperture 1.4 mm and 0.50mm dia wire m 1419 zinc alloy ( white powder coated ) touch lock withhook for upvc window / door m 1420 zinc alloy body with single nylon roller ( weight bearing capacity to be 40 kg ) for upvc sliding window m 1421 stainless steel ( ss 304 ) with adjustable double nylon roller ( weight bearing capacity to be 120 kg ) for upvc sliding door / window m 1422 zinc alloy ( white powder coated ) cresent lock for upvc sliding door / window m 1423 stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for upvc windows m 1424 stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for upvc windows m 1425 stainless steel friction hinges ( ss 304 grade ) size 300 x 19 x 1.9 mm for upvc window m 1426 stainless steel friction hinges ( ss 304 grade ) size 350 x 19 x 1.9 mm for upvc window m 1427 stainless steel friction hinges ( ss 304 grade ) size 400 x 19 x 1.9 mm for upvc window m 1428 wool pile / weather pile strip for upvc sliding window m 1429 aluminium grill as per is 1868 m 1430 toughened glass 12 mm thickness m 1431 8 mm thick calcium silicate perforated tiles of size 595 x595 mm m 1432 8 mm thick marble tiles ( polished ) raj nagar m 1433 chromium plated brass curtain rod 12 mm dia 1.25mm thick m 1434 chromium plated brackets ( curtain rods ) m 1435 pvc cleeves for screws m 1436 chromium plated brass curtain rod 20 mm dia 1.25mm thick m 1437 chromium plated brass curtain rod 25 mm dia 1.25mm thick...

Jharkhand State Electricity Board - Jharkhand

31955758 rate of materials supply of materials ( i ) rail pole 60 kgs 13 meter ( ii ) rail pole 52 kgs 13 meter ( iii ) rs joist pole 9.3 meter ( 175x85mm ) 19.6 kgs per mtr ( iv ) rs joist pole 9 meter ( 116x100mm ) 23 kgs per mtr ( v ) 125x70x5 rs gi joist 8mtr ( 13.3kg / mtr ) ( vi ) wpb 160x160, 30.4kg / m weather resistant h beam, 11m ( vii ) wpb 160x160, 30.4kg / m weather resistant h beam, 13m ( viii ) psc pole 400 kg w.l ( 9 mtr. ) ( ix ) psc pole 200 kg w.l ( 8 mtr. ) ( x ) steel tubular pole ( sp 32 ) of 9 meter ( xi ) steel tubular pole ( sp 55 ) of 11 meter ( xii ) steel tubular pole ( sp 72 ) of 13meter acsr conductors ( i ) acsr panther conductor ( 232 sq. mm ) ( ii ) acsr wolf conductor ( 150 sq. mm ) ( iii ) acsr dog conductor ( 100 sq. mm ) ( iv ) acsr racoon conductor ( 80 sq. mm ) ( v ) acsr rabbit conductor ( 55 mm2 ) ( vi ) acsr weasel conductor ( 34 sq. mm ) insulators & h / w fittings ( i ) 33 kv pin insulator 10 kn with pin ( porcelain type ) ( ii ) 33 kv polymer pin insulators 10 kn with gi pin and nut & washer ( iii ) 33 kv disc insulator ( polymer type ) 90 kn with h / w fitting and nut & washer ( iv ) 33 kv disc. insulator ( porcelain type ) 70 kn with h / w fitting ( v ) 33 kv disc insulator ( polymer type ) 70 kn with h / w fitting ( vi ) suspension hardware suitable for panther conductor ( vii ) tension hardware suitable for panther conductor ( viii ) 11 kv pin insulator 10 kn, od 40 mm dia with pin ( polymer type ) and nut & washer ( ix ) 11 kv pin insulator 5kn with pin ( porcelain type ) ( x ) 11 kv pin insulator 5 kn with pin ( polymer type ) and nut & washer ( xi ) 11 kv disc insulator ( polymer type ) 70 kn with h / w ( xii ) 11 kv disc insulator ( porcelain type ) 45 kn with h / w ( xiii ) 11 kv disc insulator ( polymer type ) 45 kn with h / w ( xiv ) lt pin insulator with pin ( porcelain type ) ( xv ) lt pin insulator ( porcelain type ) ( xvi ) lt shackle insulator ( porcelain type ) ( xvii ) lt shackle strip with bolts and nut ( xviii ) 33 kv post insulator 10 kn ( polymer ) ( xix ) 11 kv post insulator 5 kn ( polymer ) ( xx ) 33 kv stay insulator ( xxi ) 11 kv stay insulator ( xxii ) lt stay insulator ( xxiii ) mid span compression joints suitable for acsr panther conductor ( xxiv ) repairing sleeve suitable for acsr panther conductor isolator ( i ) 33 kv isolator 800 amp , 3 phase, with earth switch ( ii ) 33 kv isolator 800 amp , 3 phase, with out earth switch ( iii ) 33 kv isolator 630 amp, 3 phase, without earth switch ( iv ) 33 kv isolator 630 amp, 3 phase, with earth switch ( v ) 33 kv isolator 400 amp, 3 phase, with earth switch ( vi ) 11 kv isolator 630 amp, 3 phase, with earth switch ( vii ) 11 kv isolator 630 amp, 3 phase, without earth switch ( viii ) 11 kv isolator 400 amp, 3 phase, without earth switch ( ix ) 11 kv isolator 400 amp, 3 phase, with earth switch ( x ) 11 kv isolator 200 amp single phase ab switch ( i ) 33 kv 3 pin type, 3 phase, ab switch 800 amp ( porcelain type ) ( ii ) 33 kv 3 pin type, 3 phase, ab switch 630 amp ( porcelain type ) ( iii ) 33 kv 3 pin type, 3 phase, ab switch 630 amp ( polymer type ) ( iv ) 11 kv 3 pin type, 3 phase, ab switch 630 amp ( porcelain type ) ( v ) 11 kv 3 pin type, 3 phase, ab switch 400 amp ( polymer type ) ( vi ) 11 kv 3 pin type, 3 phase, ab switch 400 amp ( porcelain type ) ( vii ) 11kv ab switch 200 amps ( single break ) lightening arrestor ( i ) lightening arrestor ( 9kv 5ka ) line type ( ii ) 11 kv lightening arrester ( 9 kv, 10 ka class ii, station type ) ( 1set=3nos ) ( iii ) 33 kv lightening arrester ( 30kv, 10ka class ii, station type ) ( 1set=3nos ) earthing ( i ) 25mm dia ms rod 3 m long for earth mat ( ii ) spike earthing made of 20mm gi solid rod ( iii ) g.i earthing strip size 75x8 mm ( iv ) g.i earthing strip size 35x3 mm ( v ) g.i earthing strip size 35x4 mm ( vi ) g.i earthing strip size 40x4 mm ( vii ) g.i earthing strip size 40x5 mm ( viii ) insulated gi / alum.flexible wire 16 sq.mm ( ix ) ace chemrod ( artificial concept of earthing by chemical rod ) : ace chemrod earthing electrode ( consisting mild steel galvanised pipe of size 2500 mm in length x 48 mm outer dia. x 2 mm thick, ms rod of size 2575 mm x 16 mm be welded with bottom. the epoxy insulator of not less than 100 mm length is to be fixed on top of mild steel galvanised pipe. a highly conductive substance is to be filled in residual gap between pipe and rod ) with highly conductive substances not less than 25 kg for soil treatment ( x ) earthing complete conventional type having intermittent layer of charcoal and salt stay set ( i ) gi stay set complete for d / s / s ( 1900x 16mm ) with staywire 7 / 12 swg and guy insulator ( ii ) gi stay set complete for d / s / s ( 1900x 20mm ) with staywire 7 / 10 swg and guy insulator ( iii ) stay set complete ( 1800x20mm ) with stay wire 7 / 10 swg & guy insulator ( galvanised ) ( iv ) 11 kv stay set complete ( 1800x16 mm ) with stay wire 7 / 10 swg and guy insulator ( v ) lt stay set complete ( 1700x16 mm ) with stay wire 7 / 12 swg ( vi ) gi stay wire no. 7 / 8, 7 / 10, 7 / 12, 7 / 14, 7 / 16 p.g.clamps ( i ) p g clamp for 232 / 150 sq mm conductor ( ii ) p g clamp for 80 / 100mm2 ( iii ) p g clamps for 34 / 55mm2 ( iv ) bimettalic clamps for distribution transformers ht side ( 25 to 200 kva ) ( v ) bimettalic clamps for distribution transformers ht side above ( 200 kva ) ( vi ) bimettalic clamps for distribution transformers lt side ( 25 to 200 kva ) ( vii ) bimettalic clamps for distribution transformers lt side above ( 200 kva ) ( viii ) bimettalic clamps for power transformer 5 mva ( ix ) bimettalic clamps for power transformer 10 mva ( x ) bimettalic clamps for vcbs for 33kv and 11 kv ( xi ) bimettalic clamps for ct pt unit ( xii ) p g clamp 3 bolt for abt meters structures, gantry columns and base plates ( i ) structure for 33kv lightening arrestor [ non galvanized ] ( ii ) structure for 33kv lightening arrestor [ galvanized ] ( iii ) structure for 33 kv isolator ( galvanised ) ( iv ) structure for 11 kv isolator ( galvanised ) ( v ) structure for 33 kv isolator [ galvanized ] ( vi ) structure for 11 kv isolator [ galvanized ] ( vii ) structure for 33 kv pt ( non galvanised ) ( viii ) structure for 33 kv pt [ galvanized ] ( ix ) structure for 11 kv pt ( non galvanised ) ( x ) structure for 11 kv pt [ galvanized ] ( xi ) structure for post insulator for 11kv ( galvanised ) ( xii ) structure for post insulator for 33 kv [ galvanized ] ( xiii ) structure for 33 kv hg fuse set ( non galvanised ) ( xiv ) structure for 33 kv hg fuse set [ galvanized ] ( xv ) a swing bus structure ( xvi ) gantry column, girder structures for 33 / 11 kv pss for single transformer [ galvanized ] ( xvii ) a structures for top mounted ab switch on 33 kv bus [ galvanized ] ( xviii ) a structures for top mounted ab switch on 11 kv bus [ galvanized ] ( xix ) a structures for 11 kv take off with top mounted ab switch and provision of lightening arrester [ galvanized ] ( xx ) gi base plate for 33kv ( 500x500x10 mm ) avg weight 19.6kg / plate ( xxi ) stone base plate for 11 kv, dss, lt current and potential transformers ( i ) 33 kv ct outdoor oil immersed type, 3 core, 200 100 / 5 5 1 amp, class 0.5 for differential protection ( ii ) 33 kv ct outdoor oil immersed type, 3 core, 300 150 / 5 5 1 amp, class 0.5 for differential protection ( iii ) 33 kv ct 800 400 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( iv ) 33 kv ct 400 200 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( v ) 33 kv ct 300 150 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( vi ) 33 kv ct 200 100 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( vii ) 11 kv ct outdoor oil immersed type, 3 core, 600 300 / 5 5 1amp, class 0.5 for differential protection ( viii ) 11 kv ct 800 400 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( ix ) 11 kv ct 400 200 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( x ) 11 kv ct 300 150 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( xi ) 11 kv ct 200 100 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( xii ) 33 / √3 / 110 / √3 / 110 / √3 pt ( core 1:0.5s, core2:3p ) ( xiii ) 11 / √3 / 110 / √3 / 110 / √3 pt ( core 1:0.5s, core2:3p ) power transformer ( i ) 33 / 11 kv power transformer 10 mva copper wound, crgo core ( off load tap changer ) ( ii ) 33 / 11 kv power transformer 10 mva copper wound, crgo core ( on load tap changer ) ( iii ) 33 / 11 kv power transformer 05 mva copper wound, crgo core ( off load tap changer ) ( ivi ) 33 / 11 kv power transformer 05 mva copper wound, crgo core ( on load tap changer ) distribution transformer ( i ) 11 / 0.433 kv distribution transformer 500 kva, copper wound, crgo m4 core onan; bis level 1 ( ii ) 11 / 0.433 kv distribution transformer 500 kva, copper wound, crgo m4 core onan; bis level 2 ( iii ) 11 / 0.433 kv distribution transformer 500 kva, copper wound, crgo m4 core onan; bis level 3 ( iv ) 11 / 0.433 kv distribution transformer 500 kva, copper wound, crgo m4 core onan; bis level 4 ( v ) 11 / 0.433 kv distribution transformer 500 kva, copper wound, crgo m4 core onan; bis level 5 ( vi ) 11 / 0.433 kv distribution transformer 400 kva, copper wound, crgo m4 core onan; bis level 1 ( vii ) 11 / 0.433 kv distribution transformer 400 kva, copper wound, crgo m4 core onan; bis level 2 ( viii ) 11 / 0.433 kv distribution transformer 400 kva, copper wound, crgo m4 core onan; bis level 3 ( ix ) 11 / 0.433 kv distribution transformer 400 kva, copper wound, crgo m4 core onan; bis level 4 ( x ) 11 / 0.433 kv distribution transformer 400 kva, copper wound, crgo m4 core onan; bis level 5 ( xi ) 11 / 0.433 kv distribution transformer 315 kva, copper wound, crgo m4 core onan; bis level 1 ( xii ) 11 / 0.433 kv distribution transformer 315 kva, copper wound, crgo m4 core onan; bis level 2 ( xiii ) 11 / 0.433 kv distribution transformer 315 kva, copper wound, crgo m4 core onan; bis level 3 ( xiv ) 11 / 0.433 kv distribution transformer 315 kva, copper wound, crgo m4 core onan; bis level 4 ( xv ) 11 / 0.433 kv distribution transformer 315 kva, copper wound, crgo m4 core onan; bis level 5 ( xvi ) 11 / 0.433 kv distribution transformer 250 kva, aluminium wound, crgo m4 core onan; bis level 1 ( xvii ) 11 / 0.433 kv distribution transformer 250 kva, aluminium wound, crgo m4 core onan; bis level 2 ( xviii ) 11 / 0.433 kv distribution transformer 250 kva, aluminium wound, crgo m4 core onan; bis level 3 ( xix ) 11 / 0.433 kv distribution transformer 250 kva, aluminium wound, crgo m4 core onan; bis level 4 ( xx ) 11 / 0.433 kv distribution transformer 250 kva, aluminium wound, crgo m4 core onan; bis level 5 ( xxi ) 11 / 0.433 kv distribution transformer 200 kva, aluminium winding, stack type crgo core fitted, completely self protected; bis level 1 ( xxii ) 11 / 0.433 kv distribution transformer 200 kva, aluminium winding, stack type crgo core fitted, completely self protected; bis level 2 ( xxiv ) 11 / 0.433 kv distribution transformer 200 kva, aluminium winding, stack type crgo core fitted, completely self protected; bis level 3 ( xxv ) 11 / 0.433 kv distribution transformer 200 kva, aluminium winding, stack type crgo core fitted, completely self protected; bis level 4 ( xxvi ) 11 / 0.433 kv distribution transformer 200 kva, aluminium winding, stack type crgo core fitted, completely self protected; bis level 5 ( xxvii ) 11 / 0.433 kv distribution transformer 100 kva, aluminium winding, stack type crgo core fitted; bis level 1 ( xxviii ) 11 / 0.433 kv distribution transformer 100 kva, aluminium winding, stack type crgo core fitted; bis level 2 ( xxix ) 11 / 0.433 kv distribution transformer 100 kva, aluminium winding, stack type crgo core fitted; bis level 3 ( xxx ) 11 / 0.433 kv distribution transformer 100 kva, aluminium winding, stack type crgo core fitted; bis level 4 ( xxxi ) 11 / 0.433 kv distribution transformer 100 kva, aluminium winding, stack type crgo core fitted; bis level 5 ( xxxii ) 11 / 0.433 kv distribution transformer 63 kva, aluminium winding, stack type crgo core fitted; bis level 1 ( xxxiii ) 11 / 0.433 kv distribution transformer 63 kva, aluminium winding, stack type crgo core fitted; 4 star bee rating ; bis level 2 ( xxxiv ) 11 / 0.433 kv distribution transformer 63 kva, aluminium winding, stack type crgo core fitted; bis level 3 ( xxxv ) 11 / 0.433 kv distribution transformer 63 kva, aluminium winding, stack type crgo core fitted; bis level 4 ( xxxvi ) 11 / 0.433 kv distribution transformer 63 kva, aluminium winding, stack type crgo core fitted; bis level 5 ( xxxvii ) 11 / 0.433 kv distribution transformer 25 kva, aluminium winding, stack type crgo core fitted; bis level 1 ( xxxviii ) 11 / 0.433 kv distribution transformer 25 kva, aluminium winding, stack type crgo core fitted; bis level 2 ( xxxix ) 11 / 0.433 kv distribution transformer 25 kva, aluminium winding, stack type crgo core fitted; bis level 3 ( xl ) 11 / 0.433 kv distribution transformer 25 kva, aluminium winding, stack type crgo core fitted; bis level 4 ( xli ) 11 / 0.433 kv distribution transformer 25 kva, aluminium winding, stack type crgo core fitted; bis level 5 ( xlii ) 11 / 0.433 kv distribution transformer 16 kva, aluminium winding, stack type crgo core fitted; bis level 1 ( xliii ) 11 / 0.433 kv distribution transformer 16 kva, aluminium winding, stack type crgo core fitted; bis level 2 ( xliv ) 11 / 0.433 kv distribution transformer 16 kva, aluminium winding, stack type crgo core fitted; bis level 3 ( xlv ) 11 / 0.433 kv distribution transformer 16 kva, aluminium winding, stack type crgo core fitted; bis level 4 ( xlvi ) 11 / 0.433 kv distribution transformer 16 kva, aluminium winding, stack type crgo core fitted ; bis level 5 distribution box ( i ) lt distribution box suitable for 500 kva transformer ( 800 a, isolator & 12 sp mccb of 160 a ) ( ii ) lt distribution box suitable for 400 kva transformer ( 600 a, isolator & 9 sp mccb of 160 a ) ( iii ) lt distribution box suitable for 315 kva transformer ( 600 a, isolator & 9 sp mccb of 160 a ) ( iii ) lt distribution box suitable for 200 kva transformer ( 400 a, isolator & 9 sp mccb of 160 a ) ( v ) lt distribution box suitable for 100 kva transformer ( 200 a, isolator & four pole mccb & 6 sp mccb of 120 a ) ( v ) lt distribution box suitable for 63 kva transformer ( 200 a, isolator & four pole mccb & 6 sp mccb of 120 a ) ( vii ) ltdb for 100kva & 63kva, isolator 250a, incoming mccb 4p, 200a, 36ka, outgoing mccb 3p 100a, 36ka ( viii ) ltdb for 25kva, isolator 63a, incoming mccb 4p, 63a, 20ka, outgoing mccb 3p 32a, 20ka ( ix ) lt distribution box suitable for 63 kva transformer ( 200 a, isolator & 6 tp mccb of 100 a ) ( x ) spring loaded cp multi conn bus bar in insulated box single phase 1 in 6 out ( dist. box for fixing on pole suitable for ab xlpe cable ) ( xi ) spring loaded cp multi conn bus bar in insulated box single phase 1 in 9 out ( dist. box for fixing on pole suitable for ab xlpe cable ) ( xii ) spring loaded cp multi conn bus bar in insulated box three phase 1 in 3 out ( dist. box for fixing on pole suitable for ab xlpe cable ) ( xiii ) spring loaded cp multi conn bus bar in insulated box three phase 1 in 5 out ( dist. box for fixing on pole suitable for ab xlpe cable ) ( xiv ) spring loaded cp multi conn bus bar in insulated box three phase 1 in 8 out ( dist. box for fixing on pole suitable for ab xlpe cable ) ( xv ) spring loaded distribution bus bar insulated box for fixing on pole suitable for ab xlpe cable and three phase connection 1 incoming and out going 3 phase connection as per field requirement vcb, c&r panel ( i ) 33 kv vcb, 1250 amp., outdoor type, 26.3 ka for 1 sec rpturing capacty , with cr pannel, & c.t. ratio 1200 600 300 / 1 1a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering. pt 33kv / 110v, accuracy class 0.5, va burden 50va, with metering system in panel with numeric relay announciator ( ii ) 33 kv vcb, 1250 amp., outdoor type, 16 ka for 1 sec rpturing capacty , with cr pannel, & c.t. ratio 600 300 / 1 1a or 400 200 / 1 1a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering. pt 33kv / 110v, accuracy class 0.5, va burden 50va, ( iii ) 11 kv vcb, outdoor type, 1250 a, 25 ka for 3 sec. rupturing capacity wth c&r panel. ct 1200 600 300 / 5 5a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering. p.t. 11 kv / 110v, accuracy class 0.5, 30 va with metering system in panel ( iv ) 11 kv vcb, outdoor type, 800 a, for incoming, 18.4 ka for 1 sec. rupturing capacity with panel ( indoor ) 24 v dc operated with ct 600 300 / 5 5a or 400 200 / 5 5a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering. p.t. 33kv / 110v, accuracy class 0.5, 30 va ( v ) 11 kv vcb, outdoor type, 630 a, 25 ka for 3 sec. rupturing capacity wth c&r panel. ct 600 300 / 5 5a or 400 200 / 5 5a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering. p.t. 11 kv / 110v, accuracy class 0.5, 30 va ( vi ) 11 kv vcb, outdoor type, 400 a, for outgoing, 18.4 ka for 1 sec. rupturing capacity with panel ( indoor ) 24 v dc operated with ct 600 300 / 5 5a or 400 200 / 5 5a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering. p.t. 33kv / 110v, accuracy class 0.5, 30 va ( vii ) indoor type control and relay panel for 33kv, vcb ( feeder breaker ) consisting of a meter, volt meter, relays & accessories complete. ( viii ) indoor type control and relay panel for 33kv, vcb ( transformer breaker ) consisting of a meter, volt meter, relays & accessories complete. ( ix ) indoor type control and relay panel for 11kv, vcb ( transformer breaker ) consisting of a meter, volt meter, relays & accessories complete. ( x ) indoor type control and relay panel for 11kv, vcb ( feeder breaker ) consisting of a meter, volt meter, relays & accessories complete. distribution board ( i ) 415v ac power distribution board ( ii ) 30v dc distribution board pipe connector ( i ) aluminium pipe connector ( ii ) connector pipe to panther ( iii ) connector panther to panther ( iv ) connector panther to ab switch ( v ) connector pipe to pipe ( vi ) connector pipe to dog ( vii ) connector pipe to ab switch ( viii ) connector dog to ab switch copper control cable ( i ) 2.5 mm2 copper 2 core control cable ( armoured ) ( ii ) 2.5 mm2 copper 2 core control cable ( unarmoured ) ( iii ) 2.5 mm2 copper 4 core control cable ( armoured ) ( iv ) 2.5 mm2 copper 4 core control cable ( unarmoured ) ( v ) 2.5 mm2 copper 6 core control cable ( armoured ) ( vi ) 2.5 mm² copper 6 core un armourd cable ( vii ) 7 core x 2.5 sq.mm. armoured control cable ( viii ) 2.5 mm2 copper 8 core control cable ( unarmoured ) ( ix ) 2.5 mm2 copper 10 core control cable ( armoured ) ( x ) 2.5 mm2 copper 10 core control cable ( unarmoured ) ( xi ) 2.5 mm2 copper 12 core control cable ( armoured ) ( xii ) 2.5 mm2 copper 12 core control cable ( unarmoured ) ( xiii ) 19 core x 2.5 sq.mm.armoured control cable capacitor bank ( i ) fully automatic capacitor bank with automatic control panel, isolator, indoor type suitable vacuum circuit breaker, mounting structures etc as required as per technical specifications, drawings, scope of the works of following capacities: ( banks in muiltiple of 600 kvar as per specification ) 3600 kvar ( ii ) 1815 kvar 12.1 kv 3 phase 50 hz outdoor type capacitor bank having step as 363 kvar+726 kvar+726 kvar 12.1 kv bank shall be complete with capacitor units of 121 kvar at 6.98 kv including allied materials such as suitable size of aluminium busbars, pin / pos ( iii ) fully automatic capacitor bank with automatic control panel, isolator, indoor type suitable vacuum circuit breaker, mounting structures etc as required as per technical specifications, drawings, scope of the works of following capacities: ( banks in muiltiple of 600 kvar as per specification ) 1200 kvar ( iv ) 1089 kvar 12.1 kv 3 phase 50 hz outdoor type capacitor bank having step as 363 metering equipment ( i ) 33 kv metering cubicle with pt & ct , 0.5s accuracy class for ct and 0.5s accuracy class for pt of different capacity ( ii ) 33 kv outdoor type oil immersed ct pt combined metering unit 0.5s accuracy class for ct and 0.5s accuracy class for pt of different capacity ( iii ) 33 kv, three phase three wire / three phase four wire, accuracy class 0.2s, dlms compliant abt meter ( modular rack mounted ) of different capacity ( iv ) 33 kv, three phase three wire / three phase four wire, accuracy class 0.2s, dlms compliant abt meter ( projection type ) of different capacity ( v ) 33 kv / 110 v, three phase four wire, ( 0.2s accuracy class for ct and 0.2 accuracy class for pt ) , ratio 1600 / 1a or 1200 / 1a ct pt combined metering unit for feeder ( vi ) metering panel, data concentrator unit ( dcu ) with modem ( vii ) structure for 33 kv metering unit ( viii ) ht electronic trivector static meter, 3 phase 4 wire, accuracy class 0.2s ( – / 110v & – / 5a ) ( dlms complaint ) with compatible gprs modem with meter box ( ix ) ht electronic trivector static meter, 3 phase 4 wire, accuracy class 0.5s ( – / 110v & – / 5a ) ( dlms complaint ) with compatible gprs modem with meter box ( x ) trivector energy meter of 800 / 5 amp ( xi ) trivector energy meter of 400 / 5 amp ( xii ) 11 kv, outdoor type oil immersed ct pt combined metering unit, 3 phase 4 wire ( 11kv / 110v ) [ 12 kv pt 50va burden 0.5s accuracy class; ct 20 / 5a, 30 / 5a, 60 / 5a, 100 / 5a, 200 / 5a, 400 / 5a, 15 va, 0.5 accuracy class ] ( xiii ) 11 kv metering cubicle with pt ratio 11kv / √3 / 110v and ct ratio 20 / 5a, 30 / 5a, 60 / 5a, 100 / 5a, 200 / 5a, 400 / 5a, 0.5 accuracy class for both ( xiv ) ltct electronic meter ( 200 / 150 / 100 / 5 ) 3 phase 4 wire with meter box, class 0.5s accuracy ( xv ) ac 3 phase, 4 wire, 40 200amp lt electronic trivector accuracy class 1.0 dlms compliant category a meter with inbuilt cts and inbuilt 4g with fall back option gprs modem ( xvi ) structure for d.t meter ( xvii ) ac 3 phase dtr meter complete set above 100kva 400 / 5a ( xviii ) lt electronic trivector meter 40 200 amp. ( xix ) 11 kv / 110, 3 phase 4 wire accuracy class dlms compliant trivector energy meter ratio 200 / 5a ( xx ) 11 kv / 110, 3 phase 4 wire accuracy class dlms compliant trivector energy meter ratio 400 / 5a ( xxi ) 11 kv / 110, 3 phase 4 wire accuracy class dlms compliant trivector energy meter ratio 600 / 5a ( xxii ) 33 kv / 110, 3 phase 4 wire accuracy class dlms compliant trivector energy meter ratio 400 / 1a ( xxiii ) 33 kv / 110, 3 phase 4 wire accuracy class dlms compliant trivector energy meter ratio 600 / 1a ( xxiv ) 33kv / 110v , 3 phase, 4 wire , accuracy class 0.5 ct pt, combined metering unit for feeder, ratio 400 / 1a ( xxv ) 11kv / 110, 3 phase, 4 wire , accuracy class 0.5 ct pt, combined metering unit for feeder, ratio 400 / 5a ( xxvi ) 11 kv / 110 v 3 phase 4 wire accuracty class 0.5 ct pt combined metering unit for feeder, ratio 200 / 5 a ( xxvii ) 33kv / 110v , 3 phase, 4 wire , accuracy class 0.5 ct pt, combined metering unit for feeder, ratio 600 / 1a ( xxviii ) 11 kv / 110, 3 phase 4 wire accuracty class 0.5 ct pt combined metering unit for feeder, ratio 600 / 5 a ( xxix ) dlms compliant, single phase 2 wire 5 30 amp. 1.0 accuracy, class ac statics single phase meter with meter box ( xxx ) lt static energy meter, 3 phase 4 wire, direct connected, 100 amp. with meter box, class 1.0 accuracy ( xxxi ) three phase 4 wire ac static whole current meter, electronic energy meter with box ( 10 60 ) amp ( xxxii ) single phase electronic meter, two wire, 5 30 amp. class 1.0 accuracy with box ( xxxiii ) single phase rf meter with box as per is 13779 standards, dlms compliant ( xxxiv ) three phase rf meter with box as per is 13779 standards, dlms compliant ( xxxv ) single phase rs 232 / 485 prepaid energy meter ( xxxvi ) three phase rs 232 / 485 prepaid energy meter ( xxxvii ) single phase rf prepaid energy meter ( xxxviii ) three phase rf prepaid energy meter ( xxxix ) single phase gprs / gsm prepaid energy meter ( xl ) three phase gprs / gsm prepaid energy meter ( xli ) pvc cable gland sizes 20 mm, ( xlii ) pvc cable gland sizes 25 mm, ( xliii ) pvc cable gland sizes 32 mm ( xliv ) pvc cable gland sizes 40 mm ( xlv ) pvc cable gland sizes 50 mm ( xlvi ) pvc cable gland sizes 63 mm ( xlvii ) pvc cable gland sizes 75 mm ( xlviii ) single phase whole current smart meter ( 5 30 amp ) with rf communication module ( excl. nic card ) incl. polycarbonate meter box ( xlix ) three phase whole current smart meter ( 10 50 amp ) with rf communication module ( excl. nic card ) incl. polycarbonate meter box ( l ) three phase whole current smart meter ( 20 100 amp ) with rf communication module ( excl. nic card ) incl. polycarbonate meter box ( li ) lt three phase ct operated smart tri vector meter with rf communication module ( excl. nic card ) for consumer incl. smc double chambered meter box with embeded ct ( ct ratio 100 / 5 amp ) ( lii ) lt three phase ct operated smart tri vector meter with rf communication module ( excl. nic card ) for consumer incl. smc double chambered meter box with embeded ct ( ct ratio 200 / 5 amp ) ( liii ) lt three phase ct operated smart tri vector meter with rf communication module ( excl. nic card ) for consumer incl. smc double chambered meter box with embeded ct ( ct ratio / 5 amp ) ( liv ) ht three phase ct operated smart tri vector meter with rf communication module ( excl. nic card ) for feeder ( ct raio / 5amp ) ( lv ) ht three phase ct operated smart tri vector meter with rf communication module ( excl. nic card ) for consumer incl. meter box ( ct raio / 5amp ) ( lvi ) field routers / collectors / dcu along with installation clamp and accessories complete ( lvii ) network interface card ( nic ) for smart meter ( lviii ) centralized management console with single 24 led monitor ( lix ) work station consoles with dual 24 led monitor along with operating system, antivirus & license ( lx ) network laserjet ( b / w ) photocopy, scanning and printing ( lxi ) a4 size inkjet / bubble jet printer ( lxii ) a3 size inkjet color printer / all in one color laserjet printer ( lxii ) l.t. ct ratio 50 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( lxii ) l.t. ct ratio 100 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( lxii ) l.t. ct ratio 200 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( lxii ) l.t. ct ratio 300 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( lxii ) l.t. ct ratio 400 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( lxii ) l.t. ct ratio 500 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( lxii ) l.t. ct ratio 600 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( lxii ) l.t. ct ratio 800 / 5a, 5va, 0.5 accuracy for metering, epoxy casted gi service pipe ( i ) gi service pipe 25 mm diameter 3 mtr length ( ii ) gi service pipe 40 mm diameter 3 mtr length ( iii ) gi service pipe 60mm diameter 3 mtr length ( iv ) g.i. pipe 3 dia ring main units ( i ) 11 kv 3 way rmu, 2od + 1vl, one incomer + one breaker + one outgoing ( ii ) 11 kv 4 way rmu, 2od + 2vl, ( one incomer + two breakers + one outgoing ( iii ) 11 kv 5 way rmu, 2od + 3vl, ( one incomer + three breakers + one outgoing ) ( iv ) 11 kv 6 way rmu, 2od + 4vl, ( one incomer + four breakers + one outgoing xlpe insulated cables ( i ) 33 kv ht xlpe cable single core 630mm2 ( armoured ) ( ii ) 1c x 400mm2 cable ( 33 kv power cable ) ( iii ) 33 kv ht xlpe cable 3 core 400 sq mm ( armoured ) ( iv ) 33 kv ht xlpe cable 3 core 300mm2 ( armoured ) ( v ) 33 kv ht xlpe cable 3 core 240mm2 ( armoured ) ( vi ) 33 kv ht xlpe cable 3 core 185mm2 ( armoured ) ( vii ) 33 kv ht xlpe cable 3 core 150mm2 ( armoured ) ( viii ) 33 kv ht xlpe cable 3 core 120mm2 ( armoured ) ( ix ) 33 kv ht xlpe cable 3 core 95mm2 ( armoured ) ( x ) 33 kv ht xlpe cable 3 core 70mm2 ( armoured ) ( xi ) 33 kv ht xlpe cable 3 core 50mm2 ( armoured ) ( xii ) 11 kv 3 core x 35 sq. mm cable ( armoured ) ( xiii ) 11 kv xlpe cable single core 630mm2 ( armoured ) ( xiv ) 3core x 630sq mm ( 11 kv power cable ) ( xv ) 11 kv xlpe cable 3 core 400mm2 ( armoured ) ( xvi ) 11 kv xlpe cable 3 core 300mm2 ( armoured ) ( xvii ) 11 kv xlpe cable 3 core 240 mm2 ( armoured ) ( xviii ) 11 kv xlpe cable 3 core 185mm2 ( armoured ) ( xix ) 11 kv xlpe cable 3 core 150mm2 ( armoured ) ( xx ) 11 kv xlpe cable 3 core 120mm2 ( armoured ) ( xxi ) 11 kv xlpe cable 3 core 95mm2 ( armoured ) ( xxii ) 11 kv xlpe cable 3 core 70mm2 ( armoured ) ( xxiii ) 11 kv xlpe cable 3 core 50mm2 ( armoured ) ( xxiv ) 11 kv xlpe cable 3 core 25mm2 ( armoured ) ( xxv ) power cable for dt meter 120 sq.mm unarmoured ( xxvi ) power cable for dt meter 240 sq.mm unarmoured ( xxvii ) lt xlpe cable 4 core 16 mm2 ( armoured ) ( xxviii ) lt xlpe cable 4 core 16mm2 ( unarmoured ) ( xxix ) lt xlpe cable 4 core 25mm2 ( armoured ) ( xxx ) lt xlpe cable 3.5 core 300mm2 ( armoured ) ( xxxi ) lt xlpe cable 3.5 core 185mm2 ( armoured ) ( xxxii ) lt xlpe cable 3.5 core 120mm2 ( armoured ) ( xxxiii ) lt xlpe cable 3.5 core 95 mm2 ( armoured ) ( xxxiv ) lt xlpe cable 3.5 core 50mm2 ( armoured ) ( xxxv ) lt xlpe cable 3.5 core 25mm2 ( armoured ) ( xxxvi ) lt xlpe cable 2 core 16 mm2 ( armoured ) ( xxxvii ) lt xlpe cable 2 core 10mm2 ( armoured ) ( xxxviii ) lt xlpe cable 2 core 6mm2 ( armoured ) ( xxxix ) lt xlpe cable 1cx120 sqmm ( armoured ) ( xl ) lt xlpe single core cable 95 mm2 ( armoured ) ( xli ) lt xlpe single core cable 50 mm2 ( armoured ) ( xlii ) lt xlpe single core cable 25 mm2 ( armoured ) ( xliii ) lt xlpe cable 3.5 core 35 sq. mm. ( armoured ) ( xliv ) lt xlpe cable 3.5 core 70 sq. mm. ( armoured ) ( xlv ) lt xlpe single core unarmoured 1 x 400 sqmm pvc insulated cables ( i ) 3.5 core 300 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( ii ) 3.5 core 240 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( iii ) 3.5 core 185 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( iv ) 3.5 core 150 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( v ) 3.5 core 70 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( vi ) 3.5 core 35 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( vii ) 2 core 16 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( viii ) 1 core 120 sq. mm unarmoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( ix ) lt pvc cable 3.5 core 95 mm2 ( armoured ) ( x ) lt pvc cable 3.5 core 10 mm2 ( armoured ) ( xi ) lt pvc cable 3.5 core 6 mm2 ( armoured ) ( xii ) lt pvc cable 2 core 16 mm2 ( armoured ) ( xiii ) lt pvc cable 2 core 10 mm2 ( armoured ) ( xiv ) lt pvc cable 2 core 6 mm2 ( armoured ) ( xv ) lt pvc cable 2 core 4 mm2 ( armoured ) ( xvi ) lt pvc cable 1 core 16 mm2 ( armoured ) ( xvii ) lt pvc cable 1 core 50 mm2 ( armoured ) ( xviii ) lt pvc cable 1 core 70 mm2 ( armoured ) ( xix ) lt pvc cable 1 core 150 mm2 ( armoured ) ( xx ) lt pvc cable 1 core 300 mm2 ( armoured ) ( xxi ) pvc single phase service cable 3.5 core 25 mm2 ( amoured ) ( xxii ) 2.5 sq mm twin core pvc service cable ( armoured ) ( xxiii ) 4 sq mm twin core pvc service cable ( unarmoured ) ( xxiv ) pvc single phase service cable 2 core 2.5 mm2 ( unamoured ) ( xxv ) pvc single phase service cable 2 core 6 mm2 ( unarmoured ) ( xxvi ) pvc three phase service cable 4 core 6 mm2 ( armoured ) ( xxvii ) pvc three phase service cable 4 core 8 mm2 ( armoured ) ( xxviii ) pvc three phase service cable 4 core 10 mm2 ( armoured ) ( xxix ) pvc three phase service cable 4 core 16 mm2 ( armoured ) ( xxx ) pvc three phase service cable 4 core 25 mm2 ( armoured ) ( xxxi ) pvc three phase service cable 4 core 10 mm2 ( unarmoured ) aerial bunched cables ( i ) 11 kv xlpe ht ab cable 3cx185mm2+240mm2 bare messenger ( ii ) 11 kv xlpe ht ab cable 3cx185mm2+150mm2 bare messenger ( iii ) 11 kv xlpe ht ab cable 3cx150mm2+120mm2 bare messenger ( iv ) 11kv xlpe ht ab cable 3cx120 mm2 + 95mm2 bare messenger ( v ) 11 kv xlpe ht ab cable 3cx95mm2+80mm2 bare messenger ( vi ) 11 kv xlpe ht ab cable 3cx70mm2+70mm2 bare messenger ( vii ) 11 kv xlpe ht ab cable 3cx50mm2+70mm2 bare messenger ( viii ) 11 kv xlpe ht ab cable 3cx35mm2+70mm2 bare messenger ( ix ) 11 kv xlpe ht ab cable 3cx35mm2+35mm2 bare messenger ( x ) lt xlpe ab cable 3cx120+1cx70+1cx16 mm2 ( xi ) lt xlpe ab cable 3cx95 sqmm + 1x70 sqmm+1x70 sq mm ( xii ) lt xlpe ab cable 3cx95+1cx70+1cx16 mm2 ( xiii ) lt xlpe ab cable 3x70+1x50+1x16 ( street light ) mm2 ( xiv ) lt xlpe ab cable 3cx50 sqmm + 1x35 sqmm+1x16 sq mm ( xv ) lt xlpe ab cable 3x50+1x25+1x35 mm2 ( xvi ) lt xlpe ab cables 1x16 ( ph ) + 1x25 ( bare condustor + 1x16 ( insulated street lighting ) mm2 ( xvii ) lt xlpe ab cable 3cx120+70mm2 ( xviii ) lt xlpe ab cable 3cx95+70mm2 ( xix ) lt xlpe ab cable 3cx50+35mm2 ( xx ) lt xlpe ab cable 3cx35+25mm2 ( xxi ) lt xlpe ab cable 3cx25+25mm2 ( xxii ) lt xlpe ab cable 3cx16+25mm2 ( xxiii ) lt xlpe ab cable 1cx16+25mm2 single phase ab cable accessories ( i ) 11 kv ab cable straight thru joint kit suitable for 35 70 sqmm ( ii ) 11 kv ab cable straight thru joint kit suitable for 95 120 sqmm ( iii ) 11 kv abc termination kit 35 70 sqmm ( iv ) 11 kv abc termination kit 95 120 sqmm ( v ) lt pre insulated mid span joint suitable 25 mm2 phases ( vi ) lt pre insulated mid span joint suitable 35 mm2 phases ( vii ) lt pre insulated mid span joint suitable 50 mm2 phases ( viii ) lt pre insulated mid span joint suitable 70 mm2 phases ( ix ) lt pre insulated mid span joint suitable 95 mm2 phases ( x ) lt pre insulated mid span joint suitable 120 mm2 phases ( xi ) pre insulated mid span joint suitable for 25 mm2 neutral messenger ( xii ) pre insulated mid span joint suitable for 35 mm2 neutral messenger ( xiii ) pre insulated mid span joint suitable for 50 mm2 neutral messenger ( xiv ) insulation piercing connector for db charging ( xv ) insulation piercing connector branching suitable for t joints ( xvi ) piercing connector for lt ab cable ( xvii ) insulation piercing connector type i ( main 16 95 mm2 & tap 4 50 mm2 ) ( xviii ) insulation piercing connector type ii ( main 16 120 mm2 & tap 16 120 sq mm ) ( xix ) satellite connector ( xx ) lt ab cable accessory, 1.1mtr. stainless steel strap if207 ( 20x0.7 ) ( xxi ) buckle for strap ( xxii ) suspension clamp with eyehook ( xxiii ) suspension clamp suitable for 25 70 sqmm baremessenger ( including 1 no. suspension clamp with bracket + 1.5 mtr ss strap + 2 nos. ss buckle ) ( xxiv ) suspension clamp suitable for 35 95 sqmm bare messenger ( including 1 no. suspension clamp with bracket + 1.5 mtr ss strap + 2 nos. ss buckle ) ( xxv ) suspension clamp suitable for 95 150 sqmm bare messenger ( including 1 no. suspension clamp with bracket + 1.5 mtr ss strap + 2 nos. ss buckle ) ( xxvi ) dead end clamp with eyehook ( xxvii ) dead end clamp suitable for 25 70 sqmm bare messenger ( including 1 no. dead end bracket + 1 no. dead end + 1.5 mtr ss strap + 2 nos. ss buckle ) ( xxviii ) dead end clamp suitable for 70 95 sqmm bare messenger ( including 1 no. dead end bracket + 1 no. dead end + 1.5 mtr ss strap + 2 nos. ss buckle ) ( xxix ) dead end clamp suitable for 95 150 sqmm bare messenger ( including 1 no. dead end bracket + 1 no. dead end + 1.5 mtr ss strap + 2 nos. ss buckle ) ( xxx ) dead end clamp assembly suitable upto 25 sq.mm bare messenger ( 01 dead end clamp with bracket, 2 mtr. stainless steel straps, 02 nos. buckles ) ( xxxi ) suspension clamp assembly suitable for 95 mm2 bare messenger ( 01 nos. suspension clamp with bracket, 2 mtr. stainless stell straps 02 nos. buckles ( xxxii ) service main anchor clamp for proper support of service cable ( 4mm2 and 10 mm2 ) ( xxxiii ) eye hook ( xxxiv ) stainless steel strip of 20mmx1mmx1000mm with buckle clip fabricated items ( i ) hot dip galvanized fabricated iron material for 33 kv line, lt line & dss ( ii ) 33 kv pole top bracket 50x10 mm flat [ galvanized ] ( 2.5 kgs. ) ( iii ) 33 kv pole top bracket 65x65x6 mm [ galvanized ] ( 3.58 kgs. ) ( iv ) 33 kv pole top bracket [ non galvanized ] ( 2.9 kgs. ) ( v ) 11kv pole top bracket 50x8 mm [ galvanized ] ( 2.2 kgs. ) ( vi ) 11 kv pole top bracket 50x8 mm ( f type ) [ non galvanized ] ( 2.2 kgs, ) ( vii ) 11 kv f clamp / bracket ( 2.1 kgs. ) ( viii ) 11 kv fish plate ( 1.6 kgs. ) ( ix ) 33 kv fish plate ( for st pole 13 mtr. ) ( 3 kgs, ) ( x ) 33kv v cross arm for ( 100x50x6 mm ) [ galvanized ] ( 19.7 kgs. ) ( xi ) 33 kv v cross arm ( 100x 50x 6 mm ) [ non galvanized ] ( 19.7 kgs. ) ( xii ) 33 kv dp special type v cross arm [ galvanised ] ( 21 kgs. ) ( xiii ) 11kv v cross arm ( 100x50x6 mm ) , [ galvanized ] ( 16 kgs. ) ( xiv ) 11kv v cross arm ( 75x40x6 mm ) , [ galvanized ] ( 14.6 kgs. ) ( xv ) 11 kv v cross arm ( 75 x 40 x6 mm ) [ non galvanized ] ( 14.6 kgs. ) ( xvi ) ms angle ( 65x65x6 mm ) for guarding of 33 kv [ galvanized ] ( 16 kgs. ) ( xvii ) ms angle ( 65x65x6 mm ) for guarding of 11 kv [ galvanized ] ( 13.6 kgs. ) ( xviii ) ms angle ( 65x65x6 mm ) for guarding of 33 kv, 11 kv, l.t line [ non galvanized ] ( 13.6 kgs. ) ( xix ) top channel set ( 100x50x6 mm ) 3200 mm length [ galvanized ] ( 66.2 kgs. ) ( xx ) top channel set ( 100x50x6 mm ) [ non galvanized ] ( 66.2 kgs. ) ( xxi ) ms channel for ab switch ( 100x50x6 mm ) [ galvanized ] ( 28.16 kgs. ) ( xxii ) ms channel ab switch ( 100x50x6 mm ) [ non galvanized ] ( 28.16 kgs. ) ( xxiii ) 33kv d p channel ( 100x50x6 mm ) 3150 mm long [ galvanized ] ( 65.2 kgs. ) ( xxiv ) 33kv d p channel ( 100x50x6 mm ) 2200 mm long [ galvanized ] ( 45.5 kgs. ) ( xxv ) 33kv d p channel ( 100x50x6 mm ) 1.3 meter long [ galvanized ] ( 26.9 kgs. ) ( xxvi ) 33 kv d.p channel ( 100x50x6 mm ) 1.3 meter [ non galvanized ] ( 26.9 kgs. ) ( xxvii ) 11kv d p channel ( 75x40x6 mm ) [ galvanized ] ( 41.3 kgs. ) ( xxviii ) 11kv d.p channel ( 75x40x6mm ) [ non galvanized ] ( 41.3 kgs. ) ( xxix ) transformer base channel ( 100x50x6 mm ) [ galvanized ] ( 52.63 kgs. ) ( xxx ) transformer base channel ( 100x50x6 mm ) [ non galvanized ] ( 52.63 kgs. ) ( xxxi ) transformer belting ( 50x50x6 mm ) & belting support ( 40x40x6 mm ) [ galvanized ] ( 52.3 kgs. ) ( xxxii ) transformer belting ( 50x50x6 mm ) & belting support ( 40x40x6 mm ) [ non galvanized ] ( 52.3 kgs. ) ( xxxiii ) belting angle a ( 65x65x6 mm ) [ galvanized ] ( 31 kgs. ) ( xxxiv ) belting angle b ( 65x65x6 mm ) [ galvanized ] ( 28 kgs. ) ( xxxv ) back clamp ( 50x6 mm ) for v xrm & & top bracket for 13 mtr. stp [ galvanized ] ( 3.2 kgs. ) ( xxxvi ) back clamp ( 50x8 mm ) for guarding angle for 13 mtr. stp [ galvanized ] ( 3.2 kgs. ) ( xxxvii ) back clamp ( 50x8 mm ) for guarding angle for 9 mtr. psc pole [ galvanized ] ( 3 kgs. ) ( xxxviii ) back clamp ( 50x6 mm ) for 60kg rail pole [ galvanized ] ( 3.2 kgs. ) ( xxxix ) back clamp ( 50x6 mm ) for 60kg rail pole [ non galvanized ] ( 3.2 kgs. ) ( xl ) back clamp ( 50x8 mm ) for v xrm & top bracket for 9 mtr 400kg psc pole [ galvanized ] ( 3 kgs. ) ( xli ) back clamp ( 50x6 mm ) for v arm & top bracket 9 mtr 400kg psc pole [ galvanized ] ( 3 kgs. ) ( xlii ) back clamp ( 50x6 mm ) for 9mtr 400kg psc pole [ non galvanized ] ( 3 kgs. ) ( xliii ) back clamp ( 50x6 mm ) for 8 mtr 200kg psc pole [ galvanized ] ( 2.8 kgs. ) ( xliv ) back clamp ( 50x6 mm ) for 8 mtr 200kg psc pole [ non galvanized ] ( 2.8 kgs. ) ( xlv ) back clamp ( 50x6 mm ) for tublar pole [ galvanized ] ( 2 kgs. ) ( xlvi ) back clamp ( 50x6 mm ) for tublar pole [ non galvanized ] ( 2 kgs. ) ( xlvii ) support clamp for v cross arm for 60kg rail pole [ galvanized ] ( 1.6 kgs. each ) ( xlviii ) support clamp for v cross arm for 60kg rail pole [ non galvanized ] ( 1.6 kgs. each ) ( xlix ) support clamp for v cross arm for 9 mtr 400kg psc pole [ galvanized ] ( 1.2 kgs. each ) ( l ) support clamp for v cross arm for 9 mtr 400kg psc pole [ non galvanized ] ( 1.2 kgs. each ) ( li ) support clamp for v cross arm for 8 mtr 200kg psc pole [ galvanized ] ( 1.08 kgs. each ) ( lii ) support clamp for v cross arm for 8 mtr 200kg psc pole [ non galvanized ] ( 1.08 kgs. each ) ( liii ) support clamp for v cross arm for tublar pole [ galvanized ] ( 1.4 kgs. each ) ( liv ) support clamp for v cross arm for tublar pole [ non galvanized ] ( 1.4 kgs. each ) ( lv ) back clamp a for belting angle ( 50x8 ) ( 1.872 kgs. each ) ( lvi ) back clamp b for belting angle ( 50x8 ) ( 1.872 kgs. each ) ( lvii ) back clamp for 33 kv dp special type v cross arm [ galvanised ] ( 3 kgs. each ) ( lviii ) back clamp ( 50x6 mm ) jointing / packing piece for 60kg rail pole [ galvanized ] ( 3.7 kgs. ) ( lix ) back clamp ( 50x6 mm ) jointing / packing piece for 60kg rail pole [ non galvanized ] ( 3.7 kgs. ) ( lx ) clamp for top channel 50x6 mm flat for 60kg rail pole [ galvanized ] ( 2.8 kgs. ) ( lxi ) clamp for top channel 50x6 mm flat for 60kg rail pole [ non galvanized ] ( 2.8 kgs. ) ( lxii ) clamp for top channel 50x6 mm flat for 9 mtr 400kg psc pole [ galvanized ] ( 3 kgs. ) ( lxiii ) clamp for top channel 50x6 mm flat for 9 mtr 400kg psc pole [ non galvanized ] ( 3 kgs. ) ( lxiv ) clamp for top channel 50x6 mm flat for 8 mtr 200kg psc pole [ galvanized ] ( 2.8 kgs. ) ( lxv ) clamp for top channel 50x6 mm flat for 8 mtr 200kg psc pole [ non galvanized ] ( 2.8 kgs. ) ( lxvi ) clamp for top channel 50x6 mm flat for tublar pole [ galvanized ] ( 2 kgs. ) ( lxvii ) clamp for top channel 50x6 mm flat for tublar pole [ non galvanized ] ( 2 kgs. ) ( lxviii ) clamp for ab switch base channel ( 50x6 mm ) for 60kg rail pole [ galvanized ] ( 2.4 kgs. ) ( lxix ) clamp for ab switch base channel ( 50x6 mm ) for 60kg rail pole [ non galvanized ] ( 2.4 kgs. ) ( lxx ) clamp for ab switch base channel ( 50x6 mm ) for 9 mtr 400kg psc pole [ galvanized ] ( lxxi ) clamp for ab switch base channel ( 50x6 mm ) for 9 mtr 400kg psc pole [ non galvanized ] ( lxxii ) clamp for ab switch base channel ( 50x6 mm ) for 8 mtr 200kg psc pole [ galvanized ] ( lxxiii ) clamp for ab switch base channel ( 50x6 mm ) for 8 mtr 200kg psc pole [ non galvanized ] ( lxxiv ) clamp for ab switch base channel ( 50x6 mm ) for tublar pole [ galvanized ] ( lxxv ) clamp for ab switch base channel ( 50x6 mm ) for tublar pole [ non galvanized ] ( lxxvi ) ms channel ( 75x40x6 mm ) for supporting h.g fuse & l.a [ galvanized ] ( 19.3 kgs. ) ( lxxvii ) ms channel ( 75x40x6 mm ) for supporting h.g fuse & l.a [ non galvanized ] ( 19.3 kgs. ) ( lxxviii ) clamp ( 50 x 6 mm ) for transformer base channel [ galvanized ] ( 3.2 kgs. ) ( lxxix ) clamp ( 50 x 6 mm ) for transformer base channel [ non galvanized ] ( 3.2 kgs. ) ( lxxx ) clamp ( 50 x 6 mm ) for transformer belting [ galvanized ] ( 1.872 kgs. ) ( lxxxi ) clamp ( 50 x 6 mm ) for transformer belting [ non galvanized ] ( 1.872 kgs. ) ( lxxxii ) clamp ( 50 x 6 mm ) for lt bus & h.g fuse set [ galvanized ] ( 1.872 kgs. ) ( lxxxiii ) clamp ( 50 x 6 mm ) for lt bus & h.g fuse set [ non galvanized ] ( 1.872 kgs. ) ( lxxxiv ) d p channel support clamp ( 50x6 mm ) feet ( 1 pair = 1 set ) for 60kg rail pole [ galvanized ] ( 2.25 kgs. each ) ( lxxxv ) d.p channel support clamp ( 50x6 mm ) ) for 60kg rail pole [ non galvanized ] ( 2.25 kgs. each ) ( lxxxvi ) d p channel support clamp ( 50x6 mm ) feet ( 1 pair = 1 set ) for 9 mtr 400kg psc pole [ galvanized ] ( 1.5 kgs. each ) ( lxxxvii ) d.p channel support clamp ( 50x6 mm ) for 9 mtr 400kg psc pole [ non galvanized ] ( 1.5 kgs. each ) ( lxxxviii ) d p channel support clamp ( 50x6 mm ) feet ( 1 pair = 1 set ) for 8 mtr 200kg psc pole [ galvanized ] ( 1.1 kgs. each ) ( lxxxix ) d.p channel support clamp ( 50x6 mm ) for 8 mtr 200kg psc pole [ nongalvanized ] ( 1.1 kgs. each ) ( xc ) d p channel support clamp ( 50x6 mm ) feet ( 1 pair = 1 set ) for tublar pole [ galvanized ] ( 4.5 kgs. each ) ( xci ) d p channel support clamp ( 50x6 mm ) feet ( 1 pair = 1 set ) for tublar pole [ non galvanized ] ( 4.5 kgs. each ) ( xcii ) d p channel clamp ( 40x6 mm ) flat for 60 kg rail pole [ galvanized ] ( 1.92 kgs. ) ( xciii ) d p channel clamp ( 40x6 mm ) flat for 60 kg rail pole [ non galvanized ] ( 1.92 kgs. ) ( xciv ) d p channel clamp ( 40x6 mm ) flat 9 mtr 400kg psc pole [ galvanized ] ( 1.92 kgs. ) ( xcv ) d p channel clamp ( 40x6 mm ) flat 9 mtr 400kg psc pole [ non galvanized ] ( 1.92 kgs. ) ( xcvi ) d p channel clamp ( 40x6 mm ) flat 8 mtr 200kg psc pole [ galvanized ] ( 1.08 kgs. ) ( xcvii ) d p channel clamp ( 40x6 mm ) flat 8 mtr 200kg psc pole [ non galvanized ] ( 1.08 kgs. ) ( xcviii ) d p channel clamp ( 40x6 mm ) flat for tublar pole [ galvanized ] ( 1.8 kgs. ) ( xcix ) d p channel clamp ( 40x6 mm ) flat for tublar pole [ non galvanized ] ( 1.8 kgs. ) ( c ) 33kv cross bracing for d p structure ( 50x50x6 ) [ galvanized ] ( 64.3 kgs. ) ( ci ) 33 kv cross bracing for dp channel [ non galvanized ] ( 64.3 kgs. ) ( cii ) 11 kv cross bracing for d p structure [ galvanized ] ( 51.7 kgs. ) ( ciii ) 11 kv cross bracing for d p structure [ non galvanized ] ( 51.7 kgs. ) ( civ ) clamp for cross bracing set of 2 pair for 60kg rail pole [ galvanized ] ( 1.872 kgs. each ) ( cv ) clamp for cross bracing set of 2 pair for 60kg rail pole [ non galvanized ] ( 1.872 kgs. each ) ( cvi ) clamp for cross bracing set of 2 pair for 9 mtr 400kg psc pole [ galvanized ] ( 1.3 kgs. ) ( cvii ) clamp for cross bracing set of 2 pair for 9 mtr 400kg psc pole [ non galvanized ] ( 1.3 kgs. ) ( cviii ) clamp for cross bracing set of 2 pair for 8 mtr 200kg psc pole [ galvanized ] ( 1.2 kgs. ) ( cix ) clamp for cross bracing set of 2 pair for 8 mtr 200kg psc pole non [ galvanized ] ( 1.2 kgs. ) ( cx ) clamp for cross bracing set of 2 pair for tublar pole [ galvanized ] ( 1.75 kgs. ) ( cxi ) clamp for cross bracing set of 2 pair for tublar pole [ non galvanized ] ( 1.75 kgs. ) ( cxii ) support clamp for cross bracing for 60kg rail pole [ galvanized ] ( 2.5 kgs. each ) ( cxiii ) support clamp for cross bracing for 60kg rail pole [ non galvanized ] ( 2.5 kgs. each ) ( cxiv ) support clamp for cross bracing for 9 mtr 400kg psc pole [ galvanized ] ( 2.33 kgs. each ) ( cxv ) support clamp for cross bracing for 9 mtr 400kg psc pole [ non galvanized ] ( 2.33 kgs. each ) ( cxvi ) support clamp for cross bracing for 8 mtr 200kg psc pole [ galvanized ] ( 1.68 kgs. each ) ( cxvii ) support clamp for cross bracing for 8 mtr 200kg psc pole [ non galvanized ] ( 1.68 kgs. each ) ( cxviii ) support clamp for cross bracing for tublar pole [ galvanized ] ( 2.1 kgs. each ) ( cxix ) support clamp for cross bracing for tublar pole [ non galvanized ] ( 2.1 kgs. each ) ( cxx ) angle / side stay clamp ( 50x8 mm ) for 13 mtr. stp pole [ galvanized ] ( 2.1 kgs. ) ( cxxi ) angle / side stay clamp ( 50x6 mm ) for 60kg rail pole [ galvanized ] ( 1.92 kgs. ) ( cxxii ) angle / side stay clamp ( 50x6 mm ) for 60kg rail pole [ non galvanized ] ( 1.92 kgs. ) ( cxxiii ) angle / side stay clamp ( 50x10 mm ) for 9 mtr 400kg psc pole [ galvanized ] ( 1.92 kgs. ) ( cxxiv ) angle / side stay clamp ( 50x10 mm ) for 9 mtr 400kg psc pole [ non galvanized ] ( 1.92 kgs. ) ( cxxv ) angle / side stay clamp ( 50x6 mm ) for 8 mtr 200kg psc pole [ galvanized ] ( 1.08 kgs. ) ( cxxvi ) angle / side stay clamp ( 50x6 mm ) for 8 mtr 200kg psc pole [ non galvanized ] ( 1.08 kgs. ) ( cxxvii ) angle / side stay clamp ( 50x6 mm ) for tublar pole [ galvanized ] ( 1.92 kgs. ) ( cxxviii ) angle / side stay clamp ( 50 x 6 mm ) for tublar pole [ non galvanized ] ( 1.92 kgs. ) ( cxxix ) clamp for g.i. pipe ( 2.02 kgs. ) ( cxxx ) gi flat ( 75x6 mm ) [ galvanized ] ( 1.1 kgs. ) ( cxxxi ) ms flat ( 75x6 mm ) [ non galvanized ] ( 1.1 kgs. ) ( cxxxii ) earth clamp for earthwire ( 50 x 6 mm ) [ galvanized ] ( 1.8 kgs. ) ( cxxxiii ) earth clamp for earthwire ( 50 x 6 mm ) [ non galvanized ] ( 1.8 kgs. ) ( cxxxiv ) ms angle for lt distribution bus ( 50x50x6 mm ) [ galvanized ] ( cxxxv ) ms angle for l t distribution bus ( 50x50x6 mm ) [ non galvanized ] ( cxxxvi ) lt bracket vertical formation ( cxxxvii ) lt bracket for tapping point ( cxxxviii ) lt angle bracket ( 50x50x6 mm ) [ galvanized ] ( cxxxix ) lt angle bracket ( 50x50x6 mm ) [ non galvanized ] ( cxl ) pole clamp for i hook b type ( 0.8 kgs. each ) ( cxli ) lt back clamp ( 50 x 6 mm ) for lt angle [ galvanized ] ( 0.55 kgs. each ) ( cxlii ) lt back clamp ( 50 x 6 mm ) for lt angle [ non galvanized ] ( 0.55 kgs. each ) ( cvliii ) u clamp ( 40 x 6 mm ) [ galvanized ] ( 1.46 kgs. ) ( clxiv ) u clamp ( 40 x 6 mm ) [ non galvanized ] ( 1.46 kgs. ) ( clxv ) 50 x 6 mm galvanized gi flat ( risers ) ( clxvi ) 25 x 3 mm galvanized gi flat ( risers ) fuse ( i ) 11 kv d.o. fuse unit ( polymer type ) ( ii ) 33 kv d.o. fuse unit ( polymer type ) ( iii ) 33 kv h.g. fuse unit ( polymer type ) ( iv ) 11 kv h.g. fuse unit ( polymer type ) electrical conduit ( pipes ) ( i ) gi pipe 4 medium duty ( b class ) ( ii ) gi pipe 6 medium duty ( b class ) ( iii ) gi pipe 8 medium duty ( b class ) ( iv ) hume pipe rcc pipe 100 mm ( np2 class ) ( v ) hume pipe rcc pipe 150 mm ( np2 class ) ( vi ) hume pipe rcc pipe 200 mm ( np3 class ) ( v ) hdpe pipe 110 mm / 4 pe 63 grade ( vi ) hdpe pipe 160 mm / 6 pe 63 grade ( vii ) hdpe pipe 200 mm / 8 pe 63 grade heat shrinkable kit ( i ) 33 kv 3 core xlpe ug cable heat shrinkable straight through jointing kit suitable for 400 mm2 ( ii ) 33 kv 3 core xlpe ug cable heat shrinkable straight through jointing kit suitable for 300 mm2 ( iii ) 33 kv 3 core xlpe ug cable heat shrinkable straight through jointing kit suitable for 240mm2 ( iv ) 33 kv 3 core xlpe ug cable heat shrinkable straight through jointing kit suitable for 185 mm2 ( v ) 33 kv 3 core heat shrikable straight through cable jointing kit for 150 95 mm2 ( vi ) 33 kv 3 core heat shrikable straight through cable jointing kit for 70 35 mm2 ( vii ) 33 kv termination kit for 1core x 400mm2 ( viii ) 33 kv 3 core heat shrinkable out door type cable termination kit for 400mm2 ( ix ) 33 kv 3 core heat shrinkable out door type cable termination kit for 300 mm2 ( x ) 33 kv 3 core heat shrinkable out door type cable termination kit for 240 mm2 ( xi ) 33 kv 3 core heat shrinkable out door type cable termination kit for 185 mm2 ( xii ) 33 kv 3 core heat shrinkable out door type cable termination kit for 120 mm2 ( xiii ) 33 kv 3 core heat shrikable out door cable termination kit for 95 70 mm2 ( xiv ) 33 kv 3 core heat shrikable indoor cable termination kit for 400mm2 ( xv ) 33 kv 3 core heat shrikable indoor cable termination kit for 300 mm2 ( xvi ) 33 kv 3 core heat shrikable indoor cable termination kit for 240 mm2 ( xvii ) 33 kv 3 core heat shrikable indoor cable termination kit for 185 mm2 ( xviii ) 33 kv 3 core heat shrikable indoor cable termination kit for 120 mm2 ( xix ) 33 kv 3 core heat shrikable indoor cable termination kit for 95 70 mm2 ( xx ) 33 kv 3 core heat shrikable indoor cable termination kit for 50 25 mm2 ( xxi ) in door heat shrink type cable termination kit 11kv ht xlpecable 1cx 630 sqmm ( armoured ) ( xxii ) out door heat shrink type cable termination kit 11kv ht xlpecable 1cx 630 sqmm ( armoured ) ( xxiii ) 11 kv 3 core heat shrinkable straight through cable jointing kit 400 mm2 ( xxiv ) 11 kv 3 core heat shrinkable straight through cable jointing kit 300 mm2 ( xxv ) 11 kv 3 core heat shrinkable straight through cable jointing kit 240 mm2 ( xxvi ) 11 kv 3 core heat shrinkable straight through cable jointing kit 185 mm2 ( xxvii ) 11 kv 3 core heat shrinkable straight through cable jointing kit 95 150 mm2 ( xxviii ) 11 kv 3 core heat shrinkable straight through cable jointing kit 70 35 mm2 ( xxix ) 11 kv 3 core heat shrinkable indoor cable jointing / termination kit 400 mm2 ( xxx ) 11 kv 3 core heat shrinkable indoor cable jointing / termination kit 300 mm2 ( xxxi ) 11 kv 3 core heat shrinkable indoor cable jointing / termination kit 240 mm2 ( xxxii ) 11 kv 3 core heat shrinkable indoor cable jointing / termination kit 120 185 mm2 ( xxxiii ) 11 kv 3 core heat shrinkable indoor cable jointing / termination kit 95 50 mm2 ( xxxiv ) 11 kv 3 core heat shrinkable outdoor cable jointing / termination kit 400 mm2 ( xxxv ) 11 kv 3 core heat shrinkable outdoor cable jointing / termination kit 300 mm2 ( xxxvi ) 11 kv 3 core heat shrinkable outdoor cable jointing / termination kit 240 mm2 ( xxxvii ) 11 kv 3 core heat shrinkable outdoor cable jointing / termination kit 120 185 mm2 ( xxxviii ) 11 kv 3 core heat shrinkable outdoor cable jointing / termination kit 95 50 mm2 ug cables related material ( i ) pillar box cum consumer service distribution box one time lock system ( 1 no. 3 ph 4 wire incoming and 5 nos. 3ph 4 wire outgoing ) ( ii ) cable marker ( metal ) ab switch contact ( i ) male female contact of 33 kv ab switch 600 630 amp ( ii ) male female contact of 33 kv ab switch 400 amp ( iii ) male female contact of 33 kv ab switch 200 amp ( iv ) male female contact of 11 kv ab switch 800 amp ( v ) male female contact of 11 kv ab switch 600 amp ( vi ) male female contact of 11 kv ab switch 400 amp ( vii ) male female contact of 11 kv ab switch 200 amp testing equipment ( i ) accuchek meter high accuracy ( 0.2% in director mode / 0.5% in clamp on mode ) for kwh, kvarh and kvah maximum current up to 6a in direct mode and up to 500a in clamp on mode. lt+ : to test lt whole current single phase meters up to 60a ( ii ) accuchek meter high accuracy ( 0.2% in director mode / 0.5% in clamp on mode ) for kwh, kvarh and kvah maximum current up to 6a in direct mode and up to 500a in clamp on mode. lt+ : to test lt 3 phase & ct operated energy meters ( iii ) accuchek meter high accuracy ( 0.2% in director mode / 0.5% in clamp on mode ) for kwh for ht+ : to test meters suitable for ht, 3 phase, 3 wire and 4 wire systems ( iv ) eh ii chain electric hoist ( capacity 1 ton, standard lift 3 mtr ) with 1.5 hp motor ( v ) electronic weighing machine with 1.2x1.2 mtr. platform, suitable for weighing limit upto 2 tons ( vi ) electronic weighing machine with 2x2 mtr. platform, suitable for weighing limit upto 4 tons ( vii ) earth tester 200 amp. 2000 ohm ( digital ) ( viii ) 500 v megger ( ix ) 2.5 / 5 kv megger ( mannual ) ( x ) digital clamp meter ( meco 3150 ) ( xi ) digital tong tester ( 1000 amp., 500 v ) with associated accessories. ( xii ) digital multi meter ( 10 amp along with ma range ) ( xiii ) 2.5 kv motorised with range up to 20000 mega ohms ( xiv ) 2.5 kv motorised cum manual with range up to 20000 mega ohms ( xv ) 5 kv motorised with range up to 100000 mega ohms ( xvi ) 5 kv motorised cum manual with range up to 100000 mega ohms tool kit ( i ) adhesive insulation tape ( ii ) high temperature tape ( iii ) dicharge rod for 33 kv / 11kv ( iv ) screw driver set 840 ( v ) screw driver set 935 ( vi ) neon tester 813 ( vii ) hammer 200 gm ( viii ) hack saw frame ( ix ) hack saw blades ( x ) adjustable spanner ( xi ) wire stripper ( xii ) combinational plier ( xiii ) side cutting plier ( xiv ) measuring tape ( xv ) hand drill machine ( xvi ) punch ( xvii ) knife ( xviii ) spanner set ( xix ) tool bag ( xx ) nose plier ( xxi ) drill bit 3 / 10 concrete ( jk ) ( xxii ) chain pulley 5ton with 15 meter chain ( xxiii ) max pulley 10 ton civil works ( i ) opc cement scada related materials ( a ) scada server ( i ) fep server with interface switches for rtus and frtus ( ii ) isr server { data server } ( iii ) nms server { dms server } ( iv ) dts server ( only at ranchi ) ( v ) developmental server ( vi ) communication server ( vii ) web / directory server ( viii ) workstation with dual tft monitors ( ix ) led based video projection system with 2x3 module configuration with each module at least 67 diagonal with common projector ( x ) 33 kv or 11 kv control and relay panel, scada compatable for feeder protection ( 1f ) ( xi ) 33 kv or 11 kv control and relay panel, scada compatable for transformer protection ( it ) with o / c +e / f + diff relay ( xii ) 33 kv or 11 kv control and relay panel, scada compatable for feeder protection ( 2f ) ( xiii ) buchholz relay contact ( xiv ) minimum oil gauge ( xv ) scada compatible winding temp. indicator ( xvi ) scada compatible oil temp. indicator ( xvii ) rtu base equipment comprising panels, racks, sub racks, powe suppy modules, cpu, analog and digital input control output modules, interfacing mft using rs 485 modbus protocol and 2 ethernet ports + 4 serial ports ( rs232 / 485 ) , required a d converters and all other accessories required ( xviii ) dc voltage transducer ( xix ) rtu base and foundation ( base should be capable of withstanding 200 kg. load ) ( xx ) multi function transducers ( 5 amps, 110 v with rs 485 modbus communication protocol ) ( xxi ) type a frtu for 5 way rmus ( xxii ) type a frtu for 4 way rmus ( xxiii ) type b frtu for 3 way rmus ( xxiv ) type c frtu for 2 way rmus ( xxv ) routers 230 v ac, 2 ge ports, 48xfe, wan speed 200 mbps ( xxvi ) ethernet switch ( xxvii ) 2 mbps vpn link for connectivity for s / s with scada control center ( xxviii ) ldms ( xxix ) 2 kva ups ( for ldms ) with 160 ah battery, 72 v battery set ( xxx ) gsm / gprs modem along with accessories ( xxxi ) b / w laser printer for ldms ( xxxii ) 48 v dc power supply system based on smps for rtu & comm. equipment with 80 ah battery ( xxxiii ) cat 6 cable ( xxxiv ) ldms software ( xxxv ) numerical relay scada compatible for power transformer protection ( xxxvi ) numerical relay scada compatible for 33kv and 11 kv feeder protection ( xxxvii ) mcu module card ( xxxviii ) power module card ( xxxix ) di card ( xl ) do card ( xli ) ai card ( xlii ) com 6 card ( xliii ) rmu 3 way ( 1 incomer, 1 outgoing and 1 breaker ) scada compatible ( xliv ) rmu 5 way ( 1 incomer, 1 outgoing and 3 breakers ) scada compatible ( xlv ) 11 kv sectionalizer ( xlvi ) 11 kv auto reclosure ( xlvii ) gprs / cdma / edge / 3g modem ( xlviii ) heavy duty relay for cb trip / close ( 48 v dc, 2 no, 1 nc ) ( xlix ) 48 v dcps at rtu locations along with vrla batteries ( l ) 11 kv stand alone fault passage indicator complete with gprs enabled modem ( scada compatible ) ( li ) 33 kv stand alone fault passage indicator complete with gprs enabled modem ( scada compatible ) ( b ) storage & backup devices ( i ) external raid mass storage device ( for 2 months online backup ) ( ii ) external dat drive ( c ) switches ( i ) layer ii switch ( scada / dms lan ) ( 48 ports ) ( ii ) layer switch ( planning & development system lan ) ( 24 ports ) ( d ) other active devices ( i ) gps time synchronization system ( ii ) time, day & date digital displays ( e ) printers ( i ) a3 color inkjet printer ( ii ) b / w laser printer ( iii ) color laser printer ( f ) security system ( dmz ) ( i ) web server with load balancing ( ii ) firewall & network ids / ips in pair ( 2 nos. ) ( g ) cabling system ( i ) cable, jacks, hubs, etc. ( ii ) acdb for control centre ( iii ) kvm switch ( iv ) panels ( h ) software for control centre ( i ) scada software ( ii ) isr software ( iii ) dms software ( iv ) dts software ( v ) developmental software ( vi ) network management software ( viii ) gis adaptor / engine for importing data from gis system under it system ( i ) form: f 4: rtu:rtu type b 33 / 11 kv sub stations ( i ) rtu base equipment comprising panels, racks, sub racks, power supply modules, cpu, analog and digital input control output modules, interfacing equipments for interfacing mfts using rs 485 modbus protocol and 2 eathernet ports, required a d converters & all other required items / accessories including complete wiring for all modules for locations mentioned for type b rtus ( ii ) multifunction transducers ( mfts ) ( iii ) contact multiplying relays ( cmrs ) ( iv ) heavy duty relays ( hdrs ) for cb trip / close and rise and lower of oltc ( v ) weather transducer wind speed ( vi ) weather transducer rainfall ( vii ) weather transducer humidity ( viii ) weather transducer temperature ( ix ) weather transducer wind direction ( x ) router for rtus at dc power supply ( xi ) oltc transducers ( xii ) dc current transducer ( xiii ) dc voltage transducer ( xiv ) acdb with sufficient mccbs ( j ) test equipments for rtu ( i ) rtu database configuration & maintenance software tool ( ii ) master station cum rtu simulator & protocol analyzer software tool ( iii ) laptop pc for above software tools along with interfacing hardware including hub ( k ) form: f 5:frtu / frtus ( i ) type a frtu for 5 way rmus ( ii ) type a1 frtu for 4 way rmus ( iii ) type b frtu for 3 way rmus ( iv ) type c frtu for sectionalizers ( v ) mfts ( vi ) contact multiplying relays ( cmrs ) ( vii ) heavy duty relays for cb trip / close ( l ) test equipments for frtu ( i ) frtu database configuration & maintenance software tool ( ii ) master station cum frtu simulator & protocol analyzer software tool ( iii ) laptop pc for above software tools along with interfacing hardware including hub ( m ) f4: gprs / cdma / edge / 3gmodems ( i ) gprs ( n ) form: f 7: auxiliary power supply system ( aps ) ( i ) 20 kva ups ( 1+1 ) with vrla batteries to give 4 hrs back up ( ii ) dc power supply ( dcps ) system based on smps ( for 20 a load plus charging current@10% capacity ) with vrla batteries to give 4 hrs back up. ( iii ) 2 kva ups for rtu locations / ldms ( iv ) 48 v dcps at rtu locations along with vrla batteries ( v ) 24 / 48 v dcps for frtu locations along with vrla batteries safety equipment ( i ) rechargeable led hand torch ( ii ) safety helmet pvc ( iii ) safety shoes ( electrical safety ) ( iv ) rubber hand gloves ( 1.1kv ) commander ( v ) safety double adjustable belts ( karam ) ( vi ) safety items as per the requirement of electrical inspector as under first aid box, shock treatment chart, rubber matts 8 mm thick, 4 fire buckets with sand & m.s. hooks / stand, helmet, hand gloves and, fire extinguisher ( 2 nos ) fire extinguishers ( i ) i kg dry chemical powder ( map 50% ) ; fire rating : 1a, 8b ( ii ) 2 kg dry chemical powder ( map 50% ) ; fire rating: 2a, 8b ( iii ) 4 kg dry chemical powder ( map 50% ) ; fire rating : 2a, 21b ( iv ) 6 kg dry chemical powder ( map 50% ) ; fire rating: 3a, 34b ( v ) 9 kg dry chemical powder ( map 50% ) fire rating: 4a, 55b ( vi ) 6 ltr water type; fire rating : 2a ( vii ) 9 ltr water type, fire rating: 3a ( viii ) 6 ltr mechanical foam type, fire rating: 2a, 21b ( ix ) 9 ltr mechanical foam type, fire rating: 4a, 34b ( x ) 2 kg carbon dioxide type, fire rating: 8b ( xi ) 3 kg carbon dioxide type, fire rating: 13b ( xii ) 4.5 kg carbon dioxide type, fire rating: 21b ( xiii ) 6.5 kg carbon dioxide type, fire rating: 55b ( xiv ) 9 kg carbon dioxide type, fire rating: 70b ( xv ) 22.5 kg carbon dioxide type, fire rating: 70b ( xvi ) gas pressure ctc fire extinguisher ( xvii ) fire buckets ( capacity 10 ltrs. ) feeder pillar / smdb / distribution board ( i ) lt mini feeder pillar ( simple with fuse arrangement ) ( aluminium bus ) ( ii ) smdb ( 1 in, 3 out ) with housing 5 nos 20 amp spn mcb, ( iii ) tpn distribution board 12 way, 50 amp tpn mcb, ( iv ) tpn distribution board 12 way, 100 amp tpn mcb, ( v ) tpn distribution board 12 way, 150 amp tpn mcb, ( vi ) lt feeder piller box for 1 phase 8 connection made of m.s.sheet. ( vii ) lt feeder piller box for 1 phase 12 connection made of m.s.sheet. ( viii ) lt feeder piller box for 3 phase 4 connection made of m.s.sheet. ( ix ) lt feeder piller box for 3 phase 8 connection made of m.s.sheet. ( x ) lt feeder pillar ( simple with fuse arrangement ) ( aluminium bus ) aluminium end terminal lugs 10 sq mm 16 sq mm 25 sq mm 32 sq mm 50 sq mm 70 sq mm 95 sq mm 120 sqmm 150 sq mm 185 sq mm 225 sq mm 240 sq mm 300 sqmm 400 sq mm other misc. equipment ( i ) earthing g.i.strip ( 65x6 ) mm2 ( ii ) rain coat ( iii ) rubber mat along length of pannel ( iv ) aluminium pipe 40 mm dia ( v ) 400 watt / 250 v hpsv lamp fitting complete for 33 / 11 kv pss yard lightining ( vi ) 30 v 80 ah battery charging unit complete with battery and stand ( vii ) 30 volts 100 ah lead acid battery with battery charger and stand ( viii ) 30v, 40 amp. float cum boost battery charger with full wave rectification for 230 v, 1 phase, 50 hz ac input supply as per technical specifications. ( ix ) polycarbonate seal bit ( x ) sticker seal with hologram ( xi ) earth knob ( xii ) ms earth mat for switch yard ( xiii ) rail piece 44.64kg / m 6.92 meter long for power transformer ( xiv ) aluminium binding wire ( xv ) gi wire no. 6 / 8 / 10 ( xvi ) t / c fuse wire 12 / 14 / 16 / 18 / 22 / 28 / 32 swg ( xvii ) m s nuts & bolts of different size ( xviii ) galvanised nuts & bolts ( assorted size ) ( xix ) jointing sleeves ( alumnium ) suitable for 34 / 55 sq.mm ( xx ) jointing sleeves ( alumnium ) suitable for 70 100 sq.mm ( xxi ) jointing sleeves ( alumnium ) suitable for 150 232 sq.mm ( xxii ) anticlimbing device ( barbed wire ) 2x12 swg ( xxiii ) al paint ( xxiv ) red oxide paint ( xxv ) lt phase seperator ( xxvi ) 3 mm thick ms plate with weight of 0.36 kg asset tag ( xxvii ) transformer oil ( ehv grade ) ( xxviii ) natural ester oil ( xxix ) c wedge connector for 0.2sq panther conductor ( nominal aluminum area 200mm2 ) ( xxx ) fault locator machine for ug cables ( flc ) without vehicle ( xxxi ) transformer oil testing kit ( 220 / 230 ac ) ( xxxii ) transformer oil filter machine ( 500 gph ) ( xxxiii ) supply & installation of battery bank of 2 volt 300 ah vrla cells mounted on rack with insulated copper terminal connectors & nut boly ( each set of battery bank consist of 204 nos. vrla cells ) ( b ) furniture ( i ) thrive mid back revolving chair size:75cm ( w ) x 75cm ( d ) x 100cm 109cm ( h ) x 45cm 54cm ( seat height ) . ( ii ) thrive non revolving visitor chair size:63.5cm ( w ) x 59.5cm ( d ) x 97.5cm ( h ) x 42.5cm ( seat height ) . ( iii ) regency non revolving visitor chair with armrest size:59cm ( w ) x 63cm ( d ) x 81.5cm ( h ) x 45cm ( seat height ) . ( iv ) regency mid back revolving chair size:76.3cm ( w ) x 76.3cm ( d ) x 78.5cm 90.5cm ( h ) x 44.2cm 54.2cm ( seat height ) . ( v ) bravo mid back revolving chair size:76.3cm ( w ) x 76.3cm ( d ) x 85.5cm 97.5cm ( h ) x 42.5cm 54.5cm ( seat height ) . ( vi ) high back revolving chair size:76.1cm ( w ) x 76.1cm ( d ) x 114.5cm 131.5cm ( h ) x 44.5cm 54.5cm ( seat height ) . ( vii ) non revolving visitor chair size:60.9cm ( w ) x 64.7cm ( d ) x 98.2cm ( h ) x 46.2cm ( seat height ) . ( viii ) very high back revolving chair size:77cm ( w ) x 77cm ( d ) x 134.9cm 143.9cm ( h ) x 49.9cm 58.9cm ( seat height ) . ( ix ) non revolving visitor chair size:59cm ( w ) x 68.5cm ( d ) x 89.5cm ( h ) x 46.5cm ( seat height ) . ( x ) unlearn single seater cpu / laptop table for computer training hall size: 90cm ( w ) x 60cm ( d ) x 68cm ( h ) ( xi ) unlearn 2 seater laptop table for meeting hall size:135cm ( w ) x 60cm ( d ) x 68cm ( h ) ( xii ) unlearn 4 seater laptop table for meeting hall size:270cm ( w ) x 60cm ( d ) x 68cm ( h ) ( xiii ) talk unitised 4 seater round table size:120cm dia x 75cm ( h ) ( xiv ) talk modular conference table size:67.5cm ( w ) x 60cm ( d ) x 75cm ( h ) ( xv ) enterprise table with cpu hanger size:165cm ( w ) x 90cm ( d ) x 72.8cm ( h ) ( xvi ) insight table for library size:180cm ( w ) x 90cm ( d ) x 74cm ( h ) ( xvii ) versatila v2 table for faculty sitting area size:150cm ( w ) x 89.4cm ( d ) x 75cm ( h ) ( xviii ) executive table with right unit and pedestal size:180cm ( w ) x 210cm ( d ) x 75cm ( h ) ( xix ) main desk table size: 180cm ( w ) x 90cm ( d ) x 75cm ( h ) ( xx ) back unit for impress desk table size: 221.5cm ( w ) x 41cm ( d ) x 200cm ( h ) ( xxi ) display unit tv cabinet walnut color size: 140cm ( w ) x 40cm ( d ) x 75.4cm ( h ) ( xxii ) time out 4 seater pu coated dining table size: 113.5cm ( w ) x 117.5cm ( d ) x 75cm ( h ) ( xxiii ) café chair without armrest size: 52.5cm ( w ) x 55.8cm ( d ) x 84.5cm ( h ) x 45cm ( seat height ) ( xxiv ) apple dining table 6 seater glass top size: 160cm ( w ) x 90cm ( d ) x 75cm ( h ) ( xxv ) silver dining chair size: 44.5cm ( w ) x 41.5cm ( d ) x 96cm ( h ) ( xxvi ) dark walnut dining chair size: 45cm ( w ) x 45cm ( d ) x 95cm ( h ) ( xxvii ) coffee table walnut color size: 100cm ( w ) x 65cm ( d ) x 45cm ( h ) ( xxviii ) 3 seater leatherite sofa size: 205.5cm ( w ) x 92cm ( d ) x 82cm ( h ) ( xxix ) 2 seater leatherite sofa size: 100cm ( w ) x 92cm ( d ) x 82cm ( h ) ( xxx ) single seater leatherite sofa size: 86cm ( w ) x 92cm ( d ) x 82cm ( h ) ( xxxi ) plain almirah size: 91.6cm ( w ) x 48.6cm ( d ) x 198cm ( h ) ( xxxii ) glass door storwel almirah size: 91.6cm ( w ) x 48.6cm ( d ) x 198cm ( h ) ( xxxiii ) single sided wood & steel book rack base unit size:90cm ( w ) x 30cm ( d ) x 189cm ( h ) ( xxxiv ) all steel periodical display rack size:90cm ( w ) x 45cm ( d ) x 183cm ( h ) ( xxxv ) 4 door bookcase ( without top ) size:91.4cmw x 32cm ( d ) x 174.2cm ( h ) ( xxxvi ) white board 4ft. x 3ft. with stand ( xxxvii ) l shaped workstation made of 19mm thk white mdf board with pvc edges.size:1800mm ( l ) + 1200mm ( l ) x 600mm ( d ) x 1200mm ( h ) meter box ( i ) poly carbonate weather proof outdoor type meter cover boxes for single phase meter size 315mm x 265mm x 130mm along with zinc plated clamps ( ii ) poly carbonate weather proof outdoor type meter cover boxes for three phase meters 445mm x 345mm x 170mm along with zinc plated clamps ( iii ) deep drawn m.s. sheet weather proof outdoor type meter cover box for single phase meter size 300mm x 250mm x 160mm along with zinc plated clamps ( iv ) deep drawn m.s. sheet weather proof outdoor type meter cover box for three phase meter size 500mm x 300mm x 160mm along with zinc plated clamps ( v ) metal box of ct 800 / 5 amp ( vi ) meter box made of m / s sheet etc. crca metal sheet each fitted with 4no. racing cost ct ratio 400 / 5a ( vii ) meter box ( viii ) meter box made of m / s sheet etc. crca metal sheet each fitted with 4no. racing cost ct ratio 800 / 5a ( ix ) metal box of ct 400 / 5 amp gas insulated switchgear s / s ( i ) 30kv, 10ka, metal oxide, station class, surge arrester ( scada compliant ) ( for 33kv incoming line, ht side of 2nos. power transformers and 33 / 0.433kv station transformer ) outdoor type with surge counter. ( ii ) 33kv indoor gas insulated switchgear panel ( scada compliants ) with: breaker: 36kv, 1250 a, ( 25ka s.c. rating ) , 3 ph, indoor type breaker ( with 30v dc tripping / closing coil and associated control ) along with marshalling box, terminal connectors and required accessories complete as per applicable ts ct:36kv, 1 ph, 25ka ( 800^00 200 / 1 1 1 a ) indoor type current transformer, having three secondary cores ( protection & metering & current differential protection ) along with terminal connectors, junction box and required accessories etc. complete as per applicable ts ( 1 set = 3 nos. ) pts: 36kv, 1 ph, 33kv / 110 v, single core outdoor type potential transformer along with terminal connectors, junction box and required accessories etc. complete as per applicable ts ( 1 set= 3 nos. ) and digital ammeter / voltmeter / energy meter, o / c and e / f relay etc. the cable chamber shall have 3 nos., 20kv, 10 ka distribution class valve type lightning arresters and isolators of capacity given in ts. for feeder protection ( iii ) 33kv indoor gas insulated switchgear panel ( scada compliants ) consisting of 36 kv breaker 630a, 25 ka for 3 sec, 3 phase single busbar 1250a ( copper ) , 36 kv single phase, ( 800 400 200 / 1 1 a ) 3 nos of indoor type cts, 33 kv / 110volts potential transformers, indoor mounting type control panel, control cabelling between gis and indoor control panel and required accessories, bi metalic clamps, ammeter , voltmeter, modem compatible dlms compliant class 1 meter static tri vector energy meter, relays and accessories complete for bus coupler protection. ( iv ) 33kv indoor gas insulated switchgear panel ( scada compliants ) consisting of 36 kv breaker 630a, 25 ka for 3 sec, 3 phase single busbar 1250a ( copper ) , 36 kv single phase, ( 800 400 200 / 1 1 1a ) 3 nos of indoor type cts, 33 kv / 110volts potential transformers, indoor mounting type control panel, control cabelling between breakers and indoor control panel and required accessories, bi metalic clamps, ammeter , voltmeter, modem compatible dlms compliant class 1 meter static tri vector energy meter, relays and accessories complete for power transformer protection. ( v ) 11 kv indoor gas insulated switch gear panel ( scada compliants ) consisting of 1250 a, 25ka for 3 seconds, 3 ph, indoor type breaker along with 12 kv, 1 phase, 600 300 / 1 1 1 1 amp 3 nos indoor type current transformer, 11 kv / 110 volts potential transformers, indoor mounting type control panel for transformer breaker, control cabling between breaker and indoor control panel and required accessories, bi metallic clamps, a meter, volt meter, modem compatible dlms complaint class a static tri vector energy meter, relay & accessories complete for transformer protection ( vi ) 12 kv, 1250 a, 25ka for 3 seconds, 3 ph, indoor gas insulated switch gear panel ( scada compliants ) along with 12 kv, 1 phase, 600 300 / 1 1 1 1 amp 3 nos indoor type current transformer, 11 kv / 110 volts potential transformers, indoor mounting type control panel for transformer breaker, control cabling between breaker and indoor control panel and required accessories, bi metallic clamps, a meter, volt meter, modem compatible dlms complaint class a static tri vector energy meter, relay & accessories complete for bus coupler protection ( vii ) 12 kv, 1250 a, 25ka for 3 seconds, 3 ph, indoor gas insulated switch gear panel ( scada compliants ) along with 12 kv, 1 phase, 600 300 / 1 1 1 1 amp 3 nos indoor type current transformer, 11 kv / 110 volts potential transformers, indoor mounting type control panel for transformer breaker, control cabling between breaker and indoor control panel and required accessories, bi metallic clamps, a meter, volt meter, modem compatible dlms complaint class a static tri vector energy meter, relay & accessories complete for feeder protection ( viii ) remote terminal unit ( rtu ) & accessories with pc & connections with 30 nos. analog points for voltage, frequency, mw, mvar ; 3 positional analog points for oltc and 28 digital points for breaker and isolator status. ( ix ) flexible cu. earth bond 1cm dia & 500mm long, both end provision of socket suitable for m 16 bolts. ( x ) g 3 gi beam ( 5.05mtr long, consisting of 2 nos 150x75 x5.7mm ) for 33kv incoming line ( 2 nos. beam one for surge arrester and other for isolator, nominal unit wt 0.2 mt ) ( xi ) gi spikes with cone and gi ( 2 nos ) base plate 10mm ( 50x2500 mm gi pipe ) ( unit wt=0.04 mt ) ( xii ) 12 kv, 630 a, 25ka for 3 seconds, 3 ph double break centre rotating type ( dbcr ) , gang operated isolator along with earth switch and support insulators, operating mechanism, base channel, down pipe and all required accessories complete as per technical specifications, without earth switch for substation transformers. ( xiii ) 60 kg / mtr rail pole pieces 5.4 mts ( 2.7x2 ) 44.62 kg per mtr / transformer ( unit wt=0.240 mt ) ( xiv ) 2 tier 2 rows cable trench ( internal width 1500 mm, depth 680 mm, width 75x75x6 mm support angles fixed rcc column of 250 x 250 mm & with ladder type cable tray ( 45x45x5mm two angles at both side having welded flats of 25x5 mm at a gap of 150mm ) for power & control cable ( xv ) chequerred plate 1000x300x5.6mm thick for cable trench in side control room 12 mtr ( xvi ) overhead hoist beam mounted remote opertated for lifting of equipment of control room, capacity 5 tonnes ( xvii ) 36kv, 800 a, 25ka for 3 seconds, 3 ph double break centre rotating type ( dbcr ) , motorised indoor floor mounted off load isolator along with all required accessories complete as per technical specifications, scope of works and approved ( xviii ) external electrification in switch yard area including power receptacles, station yard lighting with 6 nos lighting pole ( fitted with 2x100 watts led flood light ) made of 11 meters high steel tubular poles ( is 2713 part i, ii iii ) of designation 410 – sp 60 and 6 nos light ( 1 x 250 w led ) on structure & control room complete as per technical specifications, approved drawings and scope of the work. ( xix ) internal electrification works of control room comprising of main distribution board, sub distribution boards, copper flexible multi conductor 2.5 sqmm wiring ( for light & fan ) / 4 sqmm wiring ( for power points ) , power and light points, conduits, fan / led lamps / tube fittings, exhaust fans, switches, sockets, 2mm thick, pvc 25mm dia conduits pipes in recess, plugs, miniature circuit breakers, seperate independent earthing ( 2 nos of 40mm gi pipe / 3 m long ) etc as required including dc emergency lighting and auto change over switch as per technical specifcations, approved drawings and scope of work. over head distance to fault locator ( offline ) with signature analyser. a ) accessories & laptop as per latest technical specifications tower line for river crossings ( i ) d type tower for 33kv, 11kv ( double circuit line ) ( 13.56mt each ) with all related nuts and bolts including foundation nuts and bolts ( g i type ) ( ii ) d type tower for 33kv, 11kv ( four circuit line ) ( 15.14mt ) ( double circuit tower +3meter extension each ) with all related nuts and bolts including foundation nuts and bolts ( g i type ) ( iii ) compression type tension hardware fitting for earth wire ( iv ) vibration damper suitable for 7 / 3.15 mm gi earth wire ( v ) 25x500 mm flexible cu. earth bond. covered conductor & accessories ( i ) acsr covered panther conductor ( 200 sq. mm ) ( ii ) acsr covered wolf conductor ( 150 sq. mm ) ( iii ) acsr covered dog conductor ( 100 sq. mm ) ( iv ) mid span joint ( 150 sq mm & 200 sq mm ) ( v ) suspension ties ( ( 150 sq mm & 200 sq mm ) ) ( vi ) tension clamp ( wedge type ) ( ( 150 sq mm & 200 sq mm ) ) ( vii ) insulation piercing connector ( bare to covered ) ( ( 150 sq mm & 200 sq mm ) ) ( viii ) insulation piercing connector ( covered to covered ) ( ( 150 sq mm & 200 sq mm ) ) ( ix ) insulation piercing connector with alumunium bail for earthing ( ( 150 sq mm & 200 sq mm ) ) ( x ) mid span joint ( 100 sq mm & 50 sq mm ) ( xi ) suspension ties ( ( 100 sq mm & 50 sq mm ) ) ( xii ) tension clamp ( wedge type ) ( ( 100 sq mm & 50 sq mm ) ( xiii ) insulation piercing connector ( bare to covered ) ( 100 sq mm & 50 sq mm ) ( xiv ) insulation piercing connector ( covered to covered ) ( 100 sq mm & 50 sq mm ) ( xv ) insulation piercing connector with aluminium bail for earthing ( 100 sq mm & 50 sq mm ) led lights and related items ( i ) led light 190w ( ii ) led light 120w ( iii ) led light 75w ( iv ) led light 40w ( v ) 18 watt led panel bulb with outer 205x205x25 mm sq. and 180x180 mm inner diesel generator sets ( three phase ) with amf panel ( i ) 10kva ( ii ) 20kva ( iii ) 30kva ( iv ) 40kva ( v ) 50kva ( vi ) 62.5kva ( vii ) 82.5kva ( viii ) 100kva ( ix ) 160kva trw related items ( i ) 1 / 2 l.t. brass studs ( ii ) 1 / 2 h.t. brass studs ( iii ) l.t bushing 3347 250 amp ( iv ) l.t. bushing 250 amp ( v ) kraft paper 4 mile ( vi ) insulating paper tap 2.0 mm ( vii ) press board 1 mm ( viii ) bakelite tube 3 / 8x1 / 2 ( ix ) empire sleeving size 4 mm ( x ) r.c. sheet 3 x2x1 / 2 mm ( xi ) inline connector 6 mm ( xii ) cotton tap 1 ( xiii ) r.c. strip ( xiv ) r.c. washer 50x28x2 ( xv ) silicagel breather 200 kva ( xvi ) m.seal ( xvii ) c.i.cap 1 8 1 / 2 ( xviii ) insulating paper top 2.5 mil 20 mm ( xix ) crap paper ( xx ) g.p. thinner ( xxi ) d.a. gray paint ( xxii ) white paint ( xxiii ) nylon washer 3 / 4 ( xxiv ) m.s. plug ( xxv ) l.t. al.strip 6.50x4.50 mm ( xxvi ) dpc aluminum winding wire ( xxvii ) dpc aluminum winding strip ( xxviii ) transformer testing bench panel for 10 kva to 500 kva distribution transformer with its installation & commissioning transformer repairing items ( i ) l.t bushing rod assembly of 750 kva transformer. ( ii ) h.t bushing rod assembly of 750 kva transformer. ( iii ) l.t bushing insulator of 750 kva transformer. ( iv ) h.t bushing insulator of 750 kva transformer. ( v ) l.t bushing gasket set of 750 kva transformer. ( vi ) h.t bushing gasket set of 750 kva transformer. ( vii ) tank gasket set of 750 kva transformer. ( viii ) silica gel breather of 750 kva transformer. ( ix ) arching horn of 750 kva transformer, ( x ) l.t bushing rod assembly of 500 kva transformer ( xi ) h.t bushing rod assembly of 500 kva transformer ( xii ) l.t bushing insulator of 500 kva transformer ( xiii ) h.t bushing insulator of 500 kva transformer ( xiv ) l.t bushing gasket set of 500 kva transformer ( xv ) h.t bushing gasket set of 500 kva transformer ( xvi ) tank gasket set of 500 kva transformer ( xvii ) silica gel breather of 500 kva transformer ( xviii ) arching horn of 500 kva transformer ( xix ) l.t bushing rod assembly of 400 kva transformer ( xx ) h.t bushing rod assembly of 400 kva transformer ( xxi ) l.t bushing insulator of 400 kva transformer ( xxii ) h.t bushing insulator of 400 kva transformer ( xxiii ) l.t bushing gasket set of 400 kva transformer ( xxiv ) h.t bushing gasket set of 400 kva transformer ( xxv ) tank gasket set of 400 kva transformer ( xxvi ) silica gel breather of 400 kva transformer ( xxvii ) arching horn of 400 kva transformer ( xxviii ) l.t bushing rod assembly of 315 kva transformer ( xxix ) h.t bushing rod assembly of 315 kva transformer ( xxx ) l.t bushing insulator of 315 kva transformer ( xxxi ) h.t bushing insulator of 315 kva transformer ( xxxii ) l.t bushing gasket set of 315 kva transformer ( xxxiii ) h.t bushing gasket set of 315 kva transformer ( xxxiv ) tank gasket set of 315 kva transformer ( xxxv ) silica gel breather of 315 kva transformer ( xxxvi ) arching horn of 315 kva transformer ( xxxvii ) l.t bushing rod assembly of 250 kva transformer ( xxxviii ) h.t bushing rod assembly of 250 kva transformer ( xxxix ) l.t bushing insulator of 250 kva transformer ( xl ) h.t bushing insulator of 250 kva transformer ( xli ) l.t bushing gasket set of 250 kva transformer ( xlii ) h.t bushing gasket set of 250 kva transformer ( xliii ) tank gasket set of 250 kva transformer ( xliv ) silica gel breather of 250 kva transformer ( xlv ) arching horn of 250 kva transformer ( xlvi ) l.t bushing rod assembly of 200 kva transformer ( xlvii ) h.t bushing rod assembly of 200 kva transformer ( xlviii ) l.t bushing insulator of 200 kva transformer ( xlix ) h.t bushing insulator of 200 kva transformer ( l ) l.t bushing gasket set of 200 kva transformer ( li ) h.t bushing gasket set of 200 kva transformer ( lii ) tank gasket set of 200 kva transformer ( liii ) silica gel breather of 200 kva transformer ( liv ) arching horn of 200 kva transformer ( lv ) l.t bushing rod assembly of 100 kva transformer ( lvi ) h.t bushing rod assembly of 100 kva transformer ( lvii ) l.t bushing insulator of 100 kva transformer ( lviii ) h.t bushing insulator of 100 kva transformer ( lix ) l.t bushing gasket set of 100 kva transformer ( lx ) h.t bushing gasket set of 100 kva transformer ( lxi ) tank gasket set of 100 kva transformer ( lxii ) silica gel breather of 100 kva transformer ( lxiii ) arching horn of 100 kva transformer ( lxiv ) l.t bushing rod assembly of 63 kva transformer ( lxv ) h.t bushing rod assembly of 63 kva transformer ( lxvi ) l.t bushing insulator of 63 kva transformer ( lxvii ) h.t bushing insulator of 63 kva transformer ( lxviii ) l.t bushing gasket set of 63 kva transformer ( lxix ) h.t bushing gasket set of 63 kva transformer ( lxx ) tank gasket set of 63 kva transformer ( lxxi ) silica gel breather of 63 kva transformer ( lxxii ) arching horn of 63 kva transformer ( lxxiii ) l.t bushing rod assembly of 25 kva transformer ( lxxiv ) h.t bushing rod assembly of 25 kva transformer ( lxxv ) l.t bushing insulator of 25 kva transformer ( lxxvi ) h.t bushing insulator of 25 kva transformer ( lxxvii ) l.t bushing gasket set of 25 kva transformer ( lxxviii ) h.t bushing gasket set of 25 kva transformer ( lxxix ) tank gasket set of 25 kva transformer ( lxxx ) silica gel breather of 25 kva transformer ( lxxxi ) arching horn of 25 kva transformer ab switch repairing item ( i ) jaw of air break switch 600a ( ii ) blade of of air break switch 600a ( iii ) post insulator of air break switch 600a ( iv ) bearing of air break switch 600a ( v ) phase coupling pipe of air break switch 600 a ( vi ) down pipe of air break switch 600 a ( vii ) operating handle of air break switch 600 a ( viii ) operating leaver of air break switch 600 a ( ix ) connector of air break switch 600 a ( x ) arching horn of air break switch 600 a ( xi ) jaw of air break switch 400a ( xii ) blade of of air break switch 400a ( xiii ) post insulator of air break switch 400a ( xiv ) bearing of air break switch 400a ( xv ) phase coupling pipe of air break switch 400 a ( xvi ) down pipe of air break switch 400 a ( xvii ) operating handle of air break switch 400 a ( xviii ) operating leaver of air break switch 400 a ( xix ) connector of air break switch 400 a ( xx ) arching horn of air break switch 400 a ( xxi ) jaw of air break switch 200a ( xxii ) blade of of air break switch 200a ( xxiii ) post insulator of air break switch 200a ( xxiv ) bearing of air break switch 200a ( xxv ) phase coupling pipe of air break switch 200 a ( xxvi ) down pipe of air break switch 200 a ( xxvii ) operating handle of air break switch 200 a ( xxviii ) operating leaver of air break switch 200 a ( xxix ) connector of air break switch 200 a ( xxx ) arching horn of air break switch 200 a vcb repairing item ( i ) trip coil of 33kv vcb ( ii ) trip coil of 11kv vcb ( iii ) closing coil of 33kv vcb ( iv ) closing coil of 11kv vcb ( v ) push button switch 5a ( vi ) test terminal block 5a ( vii ) 33 kv indoor current transformers of ratio as required suitable for metering and protection. ( viii ) 33 kv outdoor current transformers of ratio as required suitable for metering and protection. ( ix ) 11 kv indoor current transformers of ratio as required suitable for metering and protection. ( x ) 11 kv outdoor current transformers of ratio as required suitable for metering and protection. ( xi ) 33000 / 110 volts single phase voltage transformer indoor. ( xii ) 33000 / 110 volts single phase voltage transformer outdoor. ( xiii ) 11000 / 110 volts single phase voltage transformer indoor. ( xiv ) 11000 / 110 volts single phase voltage transformer outdoor. ( xv ) flush type switchboard mounting pattern 96x96 sq.mm m.i. voltmeter ( xvi ) voltmeter phase selector switch. ( xvii ) indicating lamps coloured red, amber and blue, white, green, etc. ( xviii ) auxiliary switch having minimum of 8 contacts, 4 normally open and 4 normally closed ( xix ) flush mounting pattern 96x96 sq.mm m.i. ammeter ( xx ) ammeter selector switch to indicate phase current ( xxi ) over current and earth fault numerical relay ( xxii ) automatic door illuminating lamps with switch ( xxiii ) 240 v, 100 w, ac single phase anti / condensation heaters, with thermostat ( 0 60 deg. c ) and switch. ( xxiv ) operation counter for vcb ( xxv ) bus bar spout epoxy casted r phase of 33kv indoor vcb ( xxvi ) bus bar spout epoxy casted y phase of 33kv indoor vcb ( xxvii ) bus bar spout epoxy casted b phase of 33kv indoor vcb ( xxviii ) circuit spout epoxy casted of 33kv indoor vcb ( xxix ) housing for vacuum interrupter of 33kv indoor vcb ( xxx ) drive insulator 33kv vcb ( xxxi ) release coil of 33kv indoor vcb ( xxxii ) bus bar spout epoxy casted r phase of 11kv indoor vcb ( xxxiii ) bus bar spout epoxy casted y phase of 11kv indoor vcb ( xxxiv ) bus bar spout epoxy casted b phase of 11kv indoor vcb ( xxxv ) circuit spout epoxy casted of 11kv indoor vcb ( xxxvi ) housing for vacuum interrupter of 11kv indoor vcb ( xxxvii ) drive insulator of 11kv vcb ( xxxviii ) release coil of 11kv indoor vcb ( xxxix ) vacuum interrupter of 33kv outdoor type ( xl ) vacuum interrupter of 33kv indoor type ( xli ) vacuum interrupter of 11kv outdoor type ( xlii ) vacuum interrupter of 11kv indoor type ( xliii ) buzzer / hooter ( xliv ) t n c switch mrt related items ( i ) fully automatic energy meter test bench with 0.02 class, 10 position, for testing of 1 ph & 3 ph energy meters with 5 years maintenance, accreditation from nabl and software updation. ( ii ) instrument transformer ( ct pt ) test system ( iii ) transformer turn ratio meter and measurement test kit ( iv ) transformer oil filtering machine 500 gph ( v ) circuit breaker operational analyzer ( vi ) 3 ph relay test kit with all necessary accessories ( vii ) primary injection kit 1000 a with relay testing facility ( viii ) ht coil winding machine its installation, testing & commissioning ( ix ) lt coil winding machine its installation, testing & commissioning ( x ) 03 ( three ) phase transformer winding resistance meter ( xi ) digital multimeter, 750v ( xii ) capacitance tan delta test set for transformer, motor and switchgear ( xiii ) capacitance tan delta test set for cables ( xiv ) vaccum interrupter tester ( xv ) secondary injection kit ( xvi ) digital ht earth tester ( xvii ) 3 ph power quality analyser ( xviii ) 05 kv insulation tester ( manual ) ( xix ) 10 kv insulation tester ( motarized ) ( xx ) digital clamp meter; 20 1000a, 200 v dc ( xxi ) digital clamp meter; 20a ( 1ma 20a ) ( xxii ) discharge rod ( make fibre ) ( xxiii ) thermal imaging camera ( xxiv ) single phase & three phase meter automatic testing bench for 20 positions ( 0.02s class rsm ) frp fencing ( i ) fiber reinforced plastic ( frp ) fencing for 11 / 0.433kv, 63 / 100 / 200 / 500 kva substation etc...

Jharkhand State Electricity Board - Jharkhand

30267609 208 / pr / jbvnl / 2021 22 supply of materials under adp head 2021 22 , electrical items : , earthing complete ( conventional ) for power transformer , earthing g.i.strip ( 65x6 mm ) , earthing ( chemical ) with gi earthing pipe 40 mm 3.1 mtrs. long ( bentonite as intermittent layers ) , 11 kv earthing ( chemical ) with earthing pipe 20 mm 1.2 mtrs. long , aluminium pipe 40 mm dia...

Jharkhand State Electricity Board - Jharkhand

30002164 185 / pr / jbvnl / 2021 22 supply of electrical line materials under adp and om head for fy 21 22 , electrical items : , aluminium pipe 40 mm dia , aluminium pipe connector , earthing complete ( conventional ) for power transformer , earthing gi strip for ( 65 x 6 ) , gi earthing pipe 3.1 meter long ( 40 mm dia ) ...

Jharkhand State Electricity Board - Jharkhand

29734262 136 / pr / jbvnl / 21 22 procurement of electric line materials under o m head for fy 2021 22 under electric supply area jamshedpur , electrical items : , aluminium pipe 40 mm dia , connector pipe to panther , connector panther to panther , connector panther to ab switch , connector pipe to ab switch , connector dog to ab switch , jointing sleeve for wolf , jointing sleeve for panther , jointing sleeve for dog , jointing sleeve for rabbit , p g clamp for 150 sq mm conductor , p g clamp for 100 sq mm conductor , p g clamp for 70 sq mm conductor...

Damodar Valley Corporation - Jharkhand

29613052 supply of connectors at dvc supply of connectors at dvc , items : , extruded al. alloy connector suitable for 220 kv / 132 kv isolator pad to double moose conductor with 12x60 mm hot dip galvanized full threaded base fixing nut & bolt. , extruded expansion type aluminum pipe to pipe ( 2.5 ) connector for s&s make tandem isolator , extruded aluminum pg clamp for moose to moose conductor , expansion type extruded al alloy connector suitable for 220 kv / 132 kv s&s isolator pad to 2.5 inch ips al pipe. 40 pcd with with 12 nos 12x60 mm hot dip galvanized full threaded nut & bolt with equalizer, flat spring washer and al flate size 250mmx100mmx10mm. , rigid type extruded al alloy connector suitable for 220 kv / 132 kv s&s isolator pad to 2.5 inch ips al pipe. 50 pcd with 12 nos 12x60 mm hot dip galvanized full threaded nut & bolt with equalizer, flat spring washer. , rigid type extruded al alloy connector suitable for 220 kv / 132 kv s&s isolator pad to 2.5 inch ips al pipe. 40 pcd with 12 nos 12x60 mm hot dip galvanized full threaded nut & bolt with equalizer, flat spring washer. , extruded al connector for wave trap to lark conductor , extruded expansion type 2 1 / 2ips al pipe to 2 1 / 2ips al pipe connector including bus bus support element with equiliser , expansion type extruded al alloy connector suitable for 220 kv / 132 kv s&s isolator pad to 2.5 inch ips al pipe. 50 pcd with 12x60 mm hot dip galvanized full threaded nut & bolt with equalizer, flat spring washer and base fixing nut & bolt. , extruded expansion type 2 1 / 2 ips al pipe to 220 kv ct bushing stud connector with equalizer 1250 a , extruded rigid 2 1 / 2ips al pipe to 2 1 / 2ips al pipe connector including bus bus support element with equiliser , extruded expansion type 2 1 / 2 ips al pipe to 132 kv ct bushing stud connector with equalizer 1250 a , expansion type connector for 245 kv mocb suitable for connection to 3 ips al. tube ( 88.9 mm ) dvc drs. no. sb 3013 , rigid type extrude al alloy socket connector suitable for dead end moose conductor with hot dip galvanized full threaded nut & bolt and washer. , extruded expansion / flexible type post of aluminum pipe to pipe ( 2.5 ) connector ( bus support ) , rigid type connector for ct stud ( dia 40mm ) to single acsr moose , rigid type connector for ct stud ( dia 30mm ) to lark conductor, 1250a => limited...

Central Coalfields Limited - Jharkhand

29560839 bus bar arrangement by alloy aluminium pipe and stacking of substation yard with sand at jharkahnd 15 no. colony substation at jocp under hzb area bus bar arrangement by alloy aluminium pipe and stacking of substation yard with sand at jharkahnd 15 no. colony substation at jocp under hzb area...

Jharkhand Bijli Vitran Nigam Limited - Jharkhand

29478089 supply of 1 aluminium pipe 40 mm dia 2 connector pipe to panther 3 connector panther to panther 4 connector panther to ab switch 5 connector pipe to ab switch 6 connector dog to ab switch 7 jointing sleeve for wolf 8 jointing sleeve for panther 9 jointing sleeve for dog 10 jointing sleeve for rabbit 11 p g clamp for 150 sq mm conductor 12 p g clamp for 100 sq mm conductor 13 p g clamp for 70 sq mm conductor...

Jharkhand Bijli Vitran Nigam Limited - Jharkhand

28288913 supply of following materials 1 33 kv pin insulator(polymer) with pin including support for jumper 2 33 kv disc. insulator(polymer) 70 kn with h/w 3 11 kv pin insulator (polymer) with pin including support for jumper 4 11 kv disc insulator polymer 45 kn with h/w fitting 5 11 kv lightening arrestor s/stn.type 9kv 10ka heavy duty 6 33 kv lightening arrestor s/stn.30kv 10ka ( class ii) heavy duty 1 earthing complete (conventional) for power transformer 2 earthing (chemical) with gi earthing pipe 40 mm 3.1 mtrs. long (bentonite as intermittent layers) 3 11 kv earthing (chemical) with earthing pipe 20 mm 1.2 mtrs. long 4 aluminium pipe 40 mm dia 5 aluminium pipe connector 6 earthingg.i.strip for (65x6) 7 gi wire no. 8 for earthing 8 earth clamp for earthwire (50 x 6 mm) [galvanized] 9 gi wire no. 10 for earthing 10 gi wire no. 8 11 m s nuts & bolts of different size 1 stay set complete (1900x20 mm) with staywire 7/10 swg 8 kgs& guy insulator) 2 lt stay set complete (1700x16 mm) with stay wire 7/12 swg 3 stay set complete for dss with wire 1 11 kv 3 core heat shrinkable indoor cable jointing kit 240 300 mm2 2 11 kv 3 core heat shrinkableoutdoor cable jointing kit 240 300 mm2 3 11 kv 3 core heat shrinkableoutdoor cable jointing kit 95 300 mm2 4 11 kv 3 core heat shrinkable indoor cable jointing kit 95 300 mm2 5 11 kv 3 core heat shrinkable straight through cable jointing kit 300 mm2 6 11 kv 3 core heat shrinkable indoor cable jointing/termination kit 300 mm2 7 11 kv 3 core heat shrinkable outdoor cable jointing/termination kit 300 mm2 8 33 kv 3 core xlpe ug cable heat shrinkable straight through jointing kit suitable for 400 mm2 9 33 kv 3 core heat shrikable indoor cable termination kit for 400mm2 10 33 kv 3 core heat shrinkable out door type cable termination kit for 400mm2 1 2.5 mm2 copper 2 core control cable (armoured) 2 2.5 mm2 copper 4 core control cable (armoured) 3 2.5 mm2 copper 6 core control cable (armoured) 4 2.5 mm2 copper 12 core control cable (armoured) 1 structure for 33kv lightening arrestor [galvanized] 2 gantry column, girder structures for 33/11 kv pss for single transformer [galvanized] 3 a structures for top mounted ab switch on 11 kv & 33 kv bus [galvanized] 4 a structures for 11 kv take off with top mounted ab switch and provision of lightening arrester [galvanized] 5 structure for 33 & 11 kv isolator [galvanized] 6 structure for post insulator for 33kv [galvanized] 7 33 kv pole top bracket for 60kg rail pole [galvanized] 8 33 kv back clamp for top bracket [galvanized] 9 33 kv v cross arm (100x 50x 6 mm) [galvanized] 10 back clamp ( 50x6 mm) for 60kg rail pole[galvanized] 11 support clamp for v cross arm for 60kg rail pole[galvanized] 12 back clamp (50x6 mm)jointing/ packing piece for 60kg rail pole [galvanized] 13 p g clamp for 150 sq mm conductor 14 33 kv back clamp for line dp channel [galvanized] 15 33 kv d.p channel support clamp (50x6 mm) [galvanized] 16 33 kv d.p channel (100x50x6 mm) 1.3 meter long [galvanized] 17 danger board 33kv 1 11kv pole top bracket 50x8 mm flat [galvanized] 2 11 kv back clamp for top bracket [galvanized] 3 11 kv v cross arm (75x 40x 6 mm) [galvanized] 4 11 kv back clamp for v cross arm [galvanized] 5 support clamp for 11 kv v cross arm [galvanized] 6 p g clamp for 100 sq mm conductor 7 11 kv back clamp for line dp channel [galvanized] 8 11 kv d.p channel support clamp (50x6 mm) [galvanized] 9 11 kv d.p channel (100x50x6 mm) 1.3 meter long [galvanized] 10 angle/side stay clamp ( 50x6 mm) for 8 mtr 200kg psc pole[galvanized] 11 clamp (50 x 6 mm flat) for top channel [galvanized] 12 clamp (50 x 6 mm) for ab switch base channel [galvanized] 13 11 kv angle stay clamp (50 x 10 mm) [galvanized] 14 ms channel (100x50x6 mm) for 11 kv ab switch [galvanized] 15 ms angle for l t distribution bus (35 x 35 x6 mm) [galvanized] 16 clamp (50 x 6 mm) for transformer base channel [galvanized] 17 clamp (50 x 6 mm) for transformer belting [ galvanized] 18 clamp (50 x 6 mm) for lt bus & h.g fuse set [ galvanized] 19 ms flat (75x40x6 mm)[ galvanized] 20 danger board 11kv ...

Jharkhand State Electricity Board - Jharkhand

28280978 procurement of earthing complete , aluminium pipe connector , g . i wire , electrical items : , earthing complete ( conventional ) for power transformer , earthing ( chemical ) with gi earthing pipe 40 mm 3 . 1 mtrs . long ( bentonite as intermittent layers ) , 11 kv earthing ( chemical ) with earthing pipe 20 mm 1 . 2 mtrs . long , aluminium pipe 40 mm dia , aluminium pipe connector , earthing g . i . strip for ( 65x6 ) , gi wire no . 8 for earthing , earth clamp for earthwire ( 50 x 6 mm ) [galvanized] , gi wire no . 10 for earthing , gi wire no . 8 , m s nuts & bolts of different size...

Jharkhand State Electricity Board - Jharkhand

28016443 nit 28/pr/jbvnl/21 22 procurement of electrical line materials under adp head for fy 2020 21 under electric supply area , jamshedpur , electrical items : , gi wire no . 8 for earthing , gi wire no . 8 , gi wire no . 10 for earthing , pg clamp for 100 sq mm conductor ) , pg clamp for 150 sq mm conductor ) , ms flat ( 75x40x6 mm ) , earth clamp for earthwire ( 50 x 6 mm ) , male female contact of 11 kv ab switch 600 amp ) , aluminium pipe 40 mm dia , aluminium pipe connector...

Jharkhand Bijli Vitran Nigam Limited - Jharkhand

27974033 supply of electric line materials , 1 gi wire no. 8 for earthing 2 gi wire no. 8 3 gi wire no. 10 for earthing 4 pg clamp for 100 sq mm conductor) 5 pg clamp for 150 sq mm conductor) 6 ms flat (75x40x6 mm) 7 earth clamp for earthwire (50 x 6 mm) 8 male female contact of 11 kv ab switch 600 amp) 9 aluminium pipe 40 mm dia 10 aluminium pipe connector...

Central Coalfields Limited - Jharkhand

27304021 bus bar arrangement by alloy aluminium pipe , painting of iron structure and stacking of sub station yard with sand and stone at jharkhand 15 no colony and laiyo sub station of jocp under hzb area...

Jharkhand State Electricity Board - Jharkhand

27105639 supply of electric line materials under om head 20 21 1 aluminium pipe 40 mm dia 2 insulation piercing connector branching suitable for t joints 3 connector pipe to panther 4 connector panther to panther 5 connector panther to ab switch 6 connector pipe to ab switch 7 connector dog to ab switch 8 p g clamp for 100 sq mm conductor 9 p g clamp for 70 sq mm conductor 10 p g clamp for 150 sq mm conductor ( wolf ) 11 jointing sleeve for dog 12 jointing sleeve for rabbit 13 jointing sleeve for panther 14 jointing sleeve for wolf 15 male female contact of 11 kv ab switch 630 amp...

Jharkhand State Electricity Board - Jharkhand

27055164 supply of electric line materials , electrical items : , aluminum pipe 40mm dia ( as per rec specification ) , aluminum connector pipe to panther for 33/11 kv p/s/s ( as per rec specification ) , aluminum connector panther to panther for 33/11 kv p/s/s ( as per rec specification ) , aluminum connector panther to ab switch for 33/11 kv p/s/s ( as per rec specification ) , aluminum connector pipe to ab switch for 33/11 kv p/s/s ( as per rec specification ) , aluminum connector dog to ab switch for 33/11 kv p/s/s ( as per rec specification ) , jointing sleeve for panther/wolf ( as per rec specification ) , p . g clamp for 150 sq mm for conductor ( as per rec specification ) , p . g clamp for 100 sq mm for conductor ( as per rec specification ) , p . g clamp for 70 sq mm for conductor ( as per rec specification ) , jointing sleeve for dog ( as per rec specification ) , jointing sleeve for rabbit ( as per rec specification ) , aluminum lugs suitable ( as per rec specification ) , aluminum binding wire ( as per rec specification ) , suspension clamp suitable for 95 150 sq mm bare messenger ( including 1 no suspension clamp with bracket +1 . 5 mtr ss strap +2 no ss buckle ) complete set ( as per rec specification ) , suspension clamp suitable for 35 95 sq mm bare messenger ( including 1 no suspension clamp with bracket +1 . 5 mtr ss strap +2 no ss buckle ) complete set ( as per rec specification ) , dead end clamp suitable for 70 95 sq mm bare messenger ( including 1 no dead end bracket +1 no dead end +1 . 5 mtr ss strap +2 no ss buckle ) complete set ( as per rec specification ) , service main anchor clamp for proper support of service cable ( 4mm2 and 10mm2 ) ( as per rec specification ) , l . t ab cable accessories 1 . 1 mtr stainless steel strap if 207 ( 20x0 . 7 ) ( as per rec specification ) , buckle for strip ( as per rec specification ) , pre insulated mid span joint suitable 95 sqmm2 ( as per rec specification ) , pre insulated mid span joint suitable 50 sqmm2 ( as per rec specification ) , piercing connector for db charging ( as per rec specification ) , insulating piercing connector branching suitable for t . joint ( as per rec specification ) , spring loaded distribution bus bar insulated box for fixing on pole suitable for ab xlpe cable and three phase connection 1 incoming and outgoing 3 phase connection ( as per rec specification ) ...

Jharkhand Bijli Vitran Nigam Limited - Jharkhand

26986601 supply of 1 connector pipe to panther nos. 394 2 connector panther to panther nos. 399 3 connector panther to ab switch nos. 422 4 connector pipe to ab switch nos. 385 5 connector dog to ab switch nos. 235 6 aluminium pipe 40 mm dia mtrs. 100 7 aluminium binding wire kg 1499 8 p g clamp for 150 sq mm conductor (wolf) nos. 952 9 p g clamp for 100 sq mm conductor nos. 1383 10 p g clamp for 70 sq mm conductor nos. 48 11 jointing sleeve for dog nos. 500 12 jointing sleeve for rabbit nos. 551 13 jointing sleeve for panther/wolf nos. 607...

Jharkhand State Electricity Board - Jharkhand

26941676 procurement of different type of connector and jointing kit , electrical items : , connector pipe to panther , connector panther to panther , connector panther to ab switch , connector pipe to ab switch , connector dog to ab switch , aluminium pipe 40 mm dia , aluminium binding wire , p g clamp for 150 sq mm conductor ( wolf ) , p g clamp for 100 sq mm conductor , p g clamp for 70 sq mm conductor , jointing sleeve for dog , jointing sleeve for rabbit , jointing sleeve for panther / wolf...

Jharkhand State Electricity Board - Jharkhand

26851452 supply of electrical line materials under o and m head for fy 2020 21 , electrical items : , aluminium pipe 40 mm dia , aluminium binding wire , buckle for strap , earthing ( chemical ) with gi earthing pipe 40 mm 3 . 1 mtrs . long ( bentonite as intermittent layer ) , earthing ( chemical ) with gi earthing pipe 20 mm 2 . 5 mtrs . long , earthing complete ( conventional ) for power transformer...

Jharkhand State Electricity Board - Jharkhand

26395817 supply of list of materials ( i ) rail pole 60 kgs 13 meter ( ii ) rail pole 52 kgs 13 meter ( iii ) rs joist pole 9.3 meter ( 175x85mm ) 19.6 kgs per mtr ( iv ) rs joist pole 9 meter ( 116x100mm ) 23 kgs per mtr ( v ) 125x70x5 rs gi joist 8mtr ( 13.3kg / mtr ) ( vi ) 125x70x6 rs gi joist 5mtr ( 13.3kg / mtr ) ( vii ) h beam pole 11 meters ( 152x152mm ) 37.1 kgs per mtr ( viii ) h beams 152 x 152 mm., 37.1 kg. / mtr. 13 mtr. long = 482.3 kg ( ix ) h beams 152 x 152 mm., 37.1 kg. / mtr. 9 mtr. long= 333.9 kg ( x ) h beams 152 x 152 mm., 37.1 kg. / mtr. 7 mtr. long= 259.7 kg ( xi ) psc pole 400 kg w.l ( 9 mtr. ) ( xii ) psc pole 200 kg w.l ( 8 mtr. ) ( xiii ) steel tubular pole ( sp 28 ) of 9 meter ( xiv ) steel tubular pole ( sp 55 ) of 11 meter ( xv ) steel tubular pole ( sp 72 ) of 13meter m1629 acsr conductors ( i ) acsr panther conductor ( 232 sq. mm ) ( ii ) acsr wolf conductor ( 150 sq. mm ) ( iii ) acsr dog conductor ( 100 sq. mm ) ( iv ) acsr racoon conductor ( 80 sq. mm ) ( v ) acsr rabbit conductor ( 55 mm2 ) ( vi ) acsr weasel conductor ( 34 sq. mm ) m1630 insulators & h / w fittings ( i ) 33 kv pin insulator 10 kn with pin ( porcelain type ) ( ii ) 33 kv polymer pin insulators 10 kn with gi pin ( iii ) 33 kv disc insulator ( polymer type ) 90 kn with h / w fitting ( iv ) 33 kv disc. insulator ( porcelain type ) 70 kn with h / w fitting ( v ) 33 kv disc insulator ( polymer type ) 70 kn with h / w fitting ( vi ) suspension hardware suitable for panther conductor ( vii ) tension hardware suitable for panther conductor ( viii ) 11 kv pin insulator 5kn with pin ( porcelain type ) ( ix ) 11 kv pin insulator 5 kn with pin ( polymer type ) ( x ) 11 kv disc insulator ( polymer type ) 70 kn with h / w ( xi ) 11 kv disc insulator ( porcelain type ) 70 kn with h / w ( xii ) 11 kv disc insulator ( porcelain type ) 45 kn with h / w ( xiii ) 11 kv disc insulator ( polymer type ) 45 kn with h / w ( xiv ) lt pin insulator with pin ( porcelain type ) ( xv ) lt pin insulator ( porcelain type ) ( xvi ) lt pin ( xvii ) lt shackle insulator ( porcelain type ) ( xviii ) lt shackle strip with bolts and nut ( xix ) 33 kv post insulator 10 kn ( polymer ) ( xx ) 11 kv post insulator 5 kn ( polymer ) ( xxi ) 33 kv stay insulator ( xxii ) 11 kv stay insulator ( xxiii ) lt stay insulator ( xxiv ) mid span compression joints suitable for acsr panther conductor ( xxv ) repairing sleeve suitable for acsr panther conductor m1631 isolator ( i ) 33 kv isolator 800 amp , 3 phase, with earth switch ( ii ) 33 kv isolator 800 amp , 3 phase, with out earth switch ( iii ) 33 kv isolator 600 amp, 3 phase, without earth switch ( iv ) 33 kv isolator 600 amp, 3 phase, with earth switch ( v ) 33 kv isolator 400 amp, 3 phase, with earth switch ( vi ) 33 kv isolator 400 amp, 3 phase, without earth switch ( vii ) 11 kv isolator 800 amp, 3 phase, with earth switch ( viii ) 11 kv isolator 800 amp, 3 phase, without earth switch ( ix ) 12 kv, 630 a, 25 ka for 3 seconds, 3 phase double break center rotating type ( dbcr ) , indoor floor mounted motorized off load isolator panel along with all required accessories complete ( x ) 11 kv isolator 1200 amp, 3 phase, with earth switch ( xi ) 11 kv isolator 1200 amp, 3 phase, without earth switch ( xii ) 11 kv isolator 800 amp, 3 phase, with earth switch ( xiii ) 11 kv isolator 800 amp, 3 phase, without earth switch ( xiv ) 11 kv isolator 600 amp, 3 phase, with earth switch ( xv ) 11 kv isolator 600 amp, 3 phase, without earth switch ( xvi ) 11 kv isolator 400 amp, 3 phase, without earth switch ( xvii ) 11 kv isolator 400 amp, 3 phase, with earth switch ( xviii ) 11 kv isolator 200 amp single phase m1632 ab switch ( i ) 33 kv 3 pin type, 3 phase, ab switch 800 amp ( porcelain type ) ( ii ) 33 kv 3 pin type, 3 phase, ab switch 600 amp ( porcelain type ) ( iii ) 33 kv 3 pin type, 3 phase, ab switch 600 amp ( polymer type ) ( iv ) 11 kv 3 pin type, 3 phase, ab switch 800 amp ( porcelain type ) ( v ) 11 kv 3 pin type, 3 phase, ab switch 400 amp ( porcelain type ) ( vi ) 11 kv 3 pin type, 3 phase, ab switch 400 amp ( polymer type ) ( vii ) 11kv ab switch 200 amps ( single break ) ( viii ) 12 kv, 3 ph, 200 a, 3 pin type, horizontal mounting type, gang operated, ab switch along with support insulators, base channel, down pipe, arcing horns etc. complete as per technical specifications, scope of works and approved drawings ( ix ) 36kv 630a, 25ka, 3 ph, 3 pin type, horizontal mounting type , gang operated, ab switch along with support insulators, base channel down pipe, arcing horns etc. complete as per technical specifications, scope of works and approved drawings m1633 lightening arrestor ( 9kv 5ka ) line type m1634 earthing ( i ) 25mm dia ms rod 3 m long for earth mat ( ii ) spike earthing made of 20mm gi solid rod ( iii ) g.i earthing strip size 75x8 mm ( iv ) g.i earthing strip size 35x3 mm ( v ) g.i earthing strip size 35x4 mm ( vi ) g.i earthing strip size 40x4 mm ( vii ) g.i earthing strip size 40x5 mm ( viii ) insulated gi / alum.flexible wire 16 sq.mm ( ix ) ace chemrod ( artificial concept of earthing by chemical rod ) : ace chemrod earthing electrode ( consisting mild steel galvanised pipe of size 2500 mm in length x 48 mm outer dia. x 2 mm thick, ms rod of size 2575 mm x 16 mm be welded with bottom. the epoxy insulator of not less than 100 mm length is to be fixed on top of mild steel galvanised pipe. a highly conductive substance is to be filled in residual gap between pipe and rod ) with highly conductive substances not less than 25 kg for soil treatment ( x ) earthing complete conventional type having intermittent layer of charcoal and salt m1635 stay set 1 2 ( i ) gi stay set complete for d / s / s ( 1900x 16mm ) with staywire 7 / 12 swg and guy insulator ( ii ) gi stay set complete for d / s / s ( 1900x 20mm ) with staywire 7 / 10 swg and guy insulator ( iii ) 33 kv stay set complete ( 1900x20 mm ) with staywire 7 / 8 swg and guy insulator ( iv ) stay set complete ( 1800x20mm ) with stay wire 7 / 10 swg & guy insulator ( galvanised ) ( v ) 11 kv stay set complete ( 1800x16 mm ) with stay wire 7 / 10 swg and guy insulator ( vi ) lt stay set complete ( 1700x16 mm ) with stay wire 7 / 12 swg ( vii ) gi stay wire no. 7 / 8, 7 / 10, 7 / 12, 7 / 14, 7 / 16 m1636 p.g.clamps ( i ) p g clamp for 232 / 150 sq mm conductor ( ii ) p g clamp for 80 / 100mm2 ( iii ) p g clamps for 34 / 55mm2 ( iv ) bimettalic clamps for distribution transformers ht side ( 25 to 200 kva ) ( v ) bimettalic clamps for distribution transformers ht side above ( 200 kva ) ( vi ) bimettalic clamps for distribution transformers lt side ( 25 to 200 kva ) ( vii ) bimettalic clamps for distribution transformers lt side above ( 200 kva ) ( viii ) bimettalic clamps for power transformer 5 mva ( ix ) bimettalic clamps for power transformer 10 mva ( x ) bimettalic clamps for vcbs for 33kv and 11 kv ( xi ) bimettalic clamps for ct pt unit ( xii ) p g clamp 3 bolt for abt meters m1637 structures, gantry columns and base plates ( i ) structure for 33kv lightening arrestor [ non galvanized ] ( ii ) structure for 33kv lightening arrestor [ galvanized ] ( iii ) ms structure for 33 kv isolator ( iv ) ms structure for 11 kv isolator ( v ) structure for 33 kv isolator [ galvanized ] ( vi ) structure for 11 kv isolator [ galvanized ] ( vii ) ms structure for 33 kv pt ( non galvanised ) ( viii ) structure for 33 kv pt [ galvanized ] ( ix ) ms structure for 11 kv pt ( non galvanised ) ( x ) structure for 11 kv pt [ galvanized ] ( xi ) ms structure for post insulator for both 33kv and 11kv ( xii ) structure for post insulator for both 33kv [ galvanized ] ( xiii ) structure for post insulator for 11kv [ galvanized ] ( xiv ) ms structure for 33 kv hg fuse set ( non galvanised ) ( xv ) structure for 33 kv hg fuse set [ galvanized ] ( xvi ) a swing bus structure ( xvii ) gantry column, girder structures for 33 / 11 kv pss for single transformer [ galvanized ] ( xviii ) a structures for top mounted ab switch on 33 kv bus [ galvanized ] ( xix ) a structures for top mounted ab switch on 11 kv bus [ galvanized ] ( xx ) a structures for 11 kv take off with top mounted ab switch and provision of lightening arrester [ galvanized ] ( xxi ) gi base plate for 33kv ( 500x500x10 mm ) avg weight 19.6kg / plate ( xxii ) stone base plate for 11 kv, dss, lt m1638 current and potential transformers ( i ) 33 kv ct outdoor oil immersed type, 3 core, 200 100 / 5 5 1 amp, class 0.5 for differential protection ( ii ) 33 kv ct outdoor oil immersed type, 3 core, 300 150 / 5 5 1 amp, class 0.5 for differential protection ( iii ) 33 kv ct 800 400 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering 1 2 ( iv ) 33 kv ct 400 200 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( v ) 33 kv ct 300 150 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( vi ) 33 kv ct 200 100 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( vii ) 33 kv combined ct & pt unit with junction box complete in all respect ( viii ) 11 kv ct outdoor oil immersed type, 3 core, 600 300 / 5 5 1amp, class 0.5 for differential protection ( ix ) 11 kv ct 800 400 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( x ) 11 kv ct 400 200 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( xi ) 11 kv ct 300 150 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( xii ) 11 kv ct 200 100 / 5 5a, 2 core, 15va , 5p10 for protection, 10va, 0.5 accuracy for metering ( xiii ) l.t. ct ratio 50 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( xiv ) l.t. ct ratio 100 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( xv ) l.t. ct ratio 200 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( xvi ) l.t. ct ratio 300 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( xvii ) l.t. ct ratio 400 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( xviii ) l.t. ct ratio 500 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( xix ) l.t. ct ratio 600 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( xx ) l.t. ct ratio 800 / 5a, 5va, 0.5 accuracy for metering, epoxy casted ( xxi ) 33 kv / 110v p.t, 50va, class 0.5 ( xxii ) 11 kv / 110v p.t , 30va, class 0.5 ( xxiii ) 600 400 200 / 5 5 5a ( 0.2s & 5p20 ) ct& vcb ( xxiv ) 600 400 200 100 / 5 5 5 5a ( 0.2s & 5p20 ) ct& vcb ( xxv ) 600 400 200 / 5 5 5a ( 0.5s ps & 5p20 ) ct& vcb ( xxvi ) 33 / √3 / 110 / √3 / 110 / √3 pt ( core 1:0.5s, core2:3p ) ( xxvii ) 11 / √3 / 110 / √3 / 110 / √3 pt ( core 1:0.5s, core2:3p ) m1639 power transformer ( i ) 33 / 11 kv power transformer 10 mva copper wound, crgo core ( off load tap changer ) ( ii ) 33 / 11 kv power transformer 10 mva copper wound, crgo core ( on load tap changer ) ( iii ) 33 / 11 kv power transformer 8 mva copper wound, crgo core ( off load tap changer ) ( iv ) 33 / 11 kv power transformer 05 mva copper wound, crgo core ( off load tap changer ) ( v ) 33 / 11 kv, 10 / 12.5 mva, oil type, two winding, 3 phase, dyn11, 50 hz, onan / onaf transformer with & 8.35% impedance on 12.5 mva with oltc ( vi ) 33 / 11 kv power transformer 05 mva copper wound, crgo core ( on load tap changer ) m1640 distribution transformer ( i ) 11 / 0.433 kv distribution transformer 500 kva, copper wound, crgo m4 core onan; bis level 2 ( ii ) 11 / 0.433 kv distribution transformer 200 kva, aluminium winding, stack type crgo core fitted, completely self protected; 4 star bee rating ; bis level 2 ( iii ) bis energy efficiency level ii, 11 / 0.433 kv100 kva, al. wd., stack type crgo core, distribution transformer fitted with lightning arrester ( la ) and completely self–protected ( csp ) ( iv ) 11 / 0.433 kv distribution transformer 100 kva, aluminium winding, stack type crgo core fitted; 4 star bee rating bis level 2 ( v ) bis energy efficiency level ii, 11 / 0.433 kv 63 kva, al. wd., stack type crgo core, distribution transformer fitted with lightning arrester ( la ) and completely self–protected ( csp ) ( vi ) 11 / 0.433 kv distribution transformer 63 kva, aluminium winding, stack type crgo core fitted; 4 star bee rating ; bis level 2 ( vii ) bis energy efficiency level 2 type tested, 11 / .433 kv 25 kva, al. wd., stack type crgo core, distribution transformer fitted with lightning arrester ( la ) and completely self –protected ( csp ) ( viii ) 11 / 0.433 kv distribution transformer 25 kva, aluminium winding, stack type crgo core fitted; 4 star bee rating bis level 2 ( ix ) 11 / 0.433 kv, 500 kva, dry type, two winding, 3 phase, dyn11, 50 hz, an, off circuit tap changer with + / 5% in steps of 2.5%on hv side for station transformer & 4% impedance with losses as per cbip ( x ) lighting transformer of 415 / 415v, 50 kva, dry type, two windin, 3 phase, dyn11, 50 hz with 4% impedence ( xi ) 11 / 0.433 kv distribution transformer 25 kva, aluminium winding, stack type crgo core fitted; 3 star bee rating ; bis level 1 ( xii ) 11 / 0.433 kv dtr 250kva trolley mounted ( xiii ) 11 / 0.433 kv dtr 250kva trolley mounted m1641 distribution box ( i ) lt distribution box suitable for 500 kva transformer ( 800 a, isolator & 12 tp mccb of 160 a ) ( ii ) lt distribution box suitable for 315 kva transformer ( 600 a, isolator & 9 tp mccb of 160 a ) ( iii ) lt distribution box suitable for 200 kva transformer ( 400 a, isolator & 6 tp mccb of 120 a ) ( iv ) lt distribution box suitable for 100 kva transformer ( 200 a, isolator & 6 tp mccb of 200 a ) ( v ) ltdb for 200kva, isolator 400a, incoming mccb 4p, 400a, 50ka, outgoing mccb 3p 100a, 36ka ( vi ) ltdb for 100kva & 63kva, isolator 250a, incoming mccb 4p, 200a, 36ka, outgoing mccb 3p 100a, 36ka ( vii ) ltdb for 25kva, isolator 63a, incoming mccb 4p, 63a, 20ka, outgoing mccb 3p 32a, 20ka ( viii ) lt distribution box suitable for 63 kva transformer ( 200 a, isolator & 6 tp mccb of 100 a ) ( ix ) spring loaded cp multi conn bus bar in insulated box single phase 1 in 6 out ( dist. box for fixing on pole suitable ab xlpe cable ) ( x ) spring loaded cp multi conn bus bar in insulated box single phase 1 in 9 out ( dist. box for fixing on pole suitable xlpe cable ) ( xi ) spring loaded cp multi conn bus bar in insulated box three phase 1 in 3 out ( dist. box for fixing on pole suitable ab xlpe cable ) ( xii ) spring loaded cp multi conn bus bar in insulated box three phase 1 in 5 out ( dist. box for fixing on pole suitable ab xlpe cable ) ( xiii ) spring loaded cp multi conn bus bar in insulated box three phase 1 in 8 out ( dist. box for fixing on pole suitable ab xlpe cable ) ( xiv ) spring loaded distribution bus bar insulated box for fixing on pole suitable for ab xlpe cable and three phase connection 1 incoming and out going 3 phase connection as per field requirement ( xv ) bus bar ( aliuminium ) r, y, b & n phase of l.t. distribution box for 750 kva transformer ( xvi ) bus bar ( aliuminium ) r, y, b & n phase of l.t. distribution box for 500 kva transformer ( xvii ) bus bar ( aliuminium ) r, y, b & n phase of l.t. distribution box for 400 kva transformer ( xviii ) bus bar ( aliuminium ) r, y, b & n phase of l.t. distribution box for 315 kva transformer ( xix ) bus bar ( aliuminium ) r, y, b & n phase of l.t. distribution box for 250 kva transformer ( xx ) bus bar ( aliuminium ) r, y, b & n phase of l.t. distribution box for 200 kva transformer ( xxi ) bus bar ( aliuminium ) r, y, b & n phase of l.t. distribution box for 100 kva transformer ( xxii ) bus bar ( aliuminium ) r, y, b & n phase of l.t. distribution box for 63 kva transformer ( xxiii ) acb 1250a, 4p, 50ka ( xxiv ) acb 1000a, 4p, 50ka ( xxv ) acb 1250a, 3p, 50ka ( xxvi ) acb 1000a, 3p, 50ka ( xxvii ) mccb 800a, 4p, 36ka ( xxviii ) mccb 700a, 4p, 36ka ( xxix ) mccb 300a, 4p, 36ka ( xxx ) mccb 200a, 4p, 36ka ( xxxi ) mccb 125a, 4p, 36ka ( xxxii ) mccb 100a, 4p, 36ka ( xxxiii ) mccb 63a, 4p, 36ka ( xxxiv ) mccb 800a, 3p, 36ka ( xxxv ) mccb 700a, 3p, 36ka ( xxxvi ) mccb 630a, 3p, 36ka ( xxxvii ) mccb 500a, 3p, 36ka ( xxxviii ) mccb 400a, 3p, 36ka ( xxxix ) mccb 300a, 3p, 36ka ( xl ) mccb 250a, 3p, 36ka ( xli ) mccb 200a, 3p, 36ka ( xlii ) mccb 160a, 3p, 36ka ( xliii ) mccb 125a, 3p, 36ka ( xliv ) mccb 100a, 3p, 36ka ( xlv ) mccb 63a, 3p, 36ka ( xlvi ) mccb single pole 200a, 36ka ( xlvii ) mccb single pole 160a, 36ka ( xlviii ) mccb single pole 120a, 36ka ( xlix ) mccb single pole 100a, 36ka ( l ) mccb single pole 32a, 36ka ( li ) panel lock m1642 vcb, c&r panel ( i ) 33 kv vcb, 1250 amp., outdoor type, 26.3 ka for 1 sec rpturing capacty , with cr pannel, & c.t. ratio 1200 600 / 1 1a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering.pt 33kv / 110v, accuracy class 0.5, va burden 50va, ( ii ) 33 kv vcb, 1250 amp., outdoor type, 26.3 ka for 1 sec rpturing capacty , with cr pannel, & c.t. ratio 600 300 / 1 1a 400 200 / 1 1a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering.pt 33kv / 110v, accuracy class 0.5, va burden 50va, ( iii ) 33 kv vcb, 800 amp., outdoor type, 16 ka for 1 sec rpturing capacty , with cr pannel, & c.t. ratio 400 200 / 1 1a or 200 100 / 1 1a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering.pt 33kv / 110v, accuracy class 0.5, va burden 50va, ( iv ) 33 kv vcb, 1250 amp., outdoor type, 16 ka for 1 sec rpturing capacty , with cr pannel, & c.t. ratio 600 300 / 1 1a 400 200 / 1 1a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering.pt 33kv / 110v, accuracy class 0.5, va burden 50va, ( v ) 11 kv vcb, outdoor type, 1250 a, 25 ka for 3 sec. rupturing capacity wth c&r panel.ct 800 400 / 5 5a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering. p.t. 33kv / 110v, accuracy class 0.5, 30 va ( vi ) 11 kv vcb, outdoor type, 630 a, 25 ka for 3 sec. rupturing capacity wth c&r panel.ct 600 300 / 5 5a or 400 200 / 5 5a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering. p.t. 33kv / 110v, accuracy class 0.5, 30 va ( vii ) 11 kv vcb, outdoor type, 800 a, for incoming, 18.4 ka for 1 sec. rupturing capacity with panel ( indoor ) 24 v dc operated withct 600 300 / 5 5a or 400 200 / 5 5a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering. p.t. 33kv / 110v, accuracy class 0.5, 30 va ( viii ) 11 kv vcb, outdoor type, 400 a, for outgoing, 18.4 ka for 1 sec. rupturing capacity with panel ( indoor ) 24 v dc operated withct 600 300 / 5 5a or 400 200 / 5 5a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering. p.t. 33kv / 110v, accuracy class 0.5, 30 va ( ix ) 11 kv vcb, outdoor type, 400 a, for capacitor, 18.4 ka for 1 sec. rupturing capacity with panel ( indoor ) 24 v dc operated withct 600 300 / 5 5a or 400 200 / 5 5a, 2 core, 15va, 5p10 for protection, accuracy 0.5, 10va for metering. p.t. 33kv / 110v, accuracy class 0.5, 30 va ( x ) indoor type control and relay panel for 11kv, 3phase, 1250 a vcb ( transformer breaker ) consisting of a meter, volt meter, relays & accessories complete as per specifications for transformer breaker protection ( xi ) indoor type control and relay panel for 11 kv 3 phase, 1250 a vcb ( feeder breakers ) consisting of a meter, volt meter, relays & accessories complete for feeder breaker protection as per technical specifications. ( xii ) indoor type control and relay panel for 33kv, vcb ( feeder breaker ) consisting of a meter, volt meter, relays & accessories complete. ( xiii ) indoor type control and relay panel for 33kv, vcb ( transformer breaker ) consisting of a meter, volt meter, relays accessories complete. ( xiv ) indoor type control and relay panel for 11kv, vcb ( transformer breaker ) consisting of a meter, volt meter, relays accessories complete. ( xv ) indoor type control and relay panel for 11kv, vcb ( feeder breaker ) consisting of a meter, volt meter, relays & accessories complete. m1643 ( ) distribution board ( i ) 415v ac power distribution board ( ii ) 30v dc distribution board m1644 ( ) pipe connector ( i ) aluminium pipe connector ( ii ) connector pipe to panther ( iii ) connector panther to panther ( iv ) connector panther to ab switch ( v ) connector pipe to pipe ( vi ) connector pipe to dog ( vii ) connector pipe to ab switch ( viii ) connector dog to ab switch m1645 copper control cable ( i ) 2.5 mm2 copper 2 core control cable ( armoured ) ( ii ) 2.5 mm2 copper 2 core control cable ( unarmoured ) ( iii ) 2.5 mm2 copper 4 core control cable ( armoured ) ( iv ) 2.5 mm2 copper 4 core control cable ( unarmoured ) ( v ) 2.5 mm2 copper 6 core control cable ( armoured ) ( vi ) 2.5 mm² copper 6 core un armourd cable ( vii ) 7 core x 2.5 sq.mm. armoured control cable ( viii ) 2.5 mm2 copper 8 core control cable ( unarmoured ) 1 2 ( ix ) 2.5 mm2 copper 10 core control cable ( armoured ) ( x ) 2.5 mm2 copper 10 core control cable ( unarmoured ) ( xi ) 2.5 mm2 copper 12 core control cable ( armoured ) ( xii ) 2.5 mm2 copper 12 core control cable ( unarmoured ) ( xiii ) 19 core x 2.5 sq.mm.armoured control cable m1646 capacitor bank ( i ) fully automatic capacitor bank with automatic control panel, isolator, indoor type suitable vacuum circuit breaker, mounting structures etc as required as per technical specifications, drawings, scope of the works of following capacities: ( banks in muiltiple of 600 kvar as per specification ) 3600 kvar ( ii ) 1815 kvar 12.1 kv 3 phase 50 hz outdoor type capacitor bank having step as 363 kvar+726 kvar+726 kvar 12.1 kv bank shall be complete with capacitor units of 121 kvar at 6.98 kv including allied materials such as suitable size of aluminium busbars, pin / pos ( iii ) fully automatic capacitor bank with automatic control panel, isolator, indoor type suitable vacuum circuit breaker, mounting structures etc as required as per technical specifications, drawings, scope of the works of following capacities: ( banks in muiltiple of 600 kvar as per specification ) 1200 kvar ( iv ) 1089 kvar 12.1 kv 3 phase 50 hz outdoor type capacitor bank having step as 363 m1647 metering equipment ( i ) 33 kv metering cubicle with pt & ct , 0.5s accuracy class for ct and 0.5 accuracy class for pt ( ii ) 33 kv outdoor type oil immersed ct pt combined metering unit 0.5s accuracy class for ct and 0.5 accuracy class for ( iii ) 33 kv, three phase three wire / three phase four wire, accuracy class 0.2s, dlms compliant abt meter ( modular rack mounted ) ( iv ) 33 kv, three phase three wire / three phase four wire, accuracy class 0.2s, dlms compliant abt meter ( projection type ) ( v ) 33 kv / 110 v, three phase four wire, ( 0.2s accuracy class for ct and 0.2 accuracy class for pt ) , ratio 1600 / 1a or 1200 / 1a ct pt combined metering unit for feeder ( vi ) metering panel, data concentrator unit ( dcu ) with modem ( vii ) structure for 33 kv metering unit ( viii ) ht electronic trivector static meter, 3 phase 4 wire, accuracy class 0.2s ( – / 110v & – / 5a ) ( dlms complaint ) with compatible gprs modem with meter box ( ix ) ht electronic trivector static meter, 3 phase 4 wire, accuracy class 0.5s ( – / 110v & – / 5a ) ( dlms complaint ) with compatible gprs modem with meter box ( x ) trivector energy meter of 800 / 5 amp for 100 kva dtr ( xi ) trivector energy meter of 400 / 5 amp ( xii ) 11 kv, outdoor type oil immersed ct pt combined metering unit, 3 phase 4 wire ( 11kv / 110v ) [ 12 kv pt 50va burden 0.5 accuracy class; ct 20 / 5a, 30 / 5a, 60 / 5a, 100 / 5a, 200 / 5a, 400 / 5a, 15 va, 0.5 accuracy class ] ( xiii ) 11 kv metering cubicle with pt ratio 11kv / √3 / 110v and ct ratio 20 / 5a, 30 / 5a, 60 / 5a, 100 / 5a, 200 / 5a, 400 / 5a, 0.5 accuracy class for both ( xiv ) ltct electronic meter, ct ratio ( 1000 / 5 ) , 3 phase 4 wire with meter box, class 0.5s accuracy ( xv ) ltct electronic meter ( 200 / 5 ) 3 phase 4 wire with meter box, class 0.5s accuracy ( xvi ) ltct electronic meter ( 150 / 5 ) 3 phase 4 wire with meter box, class 0.5s accuracy ( xvii ) ltct electronic meter ( 100 / 5 ) 3 phase 4 wire with meter box, class 0.5 accuracy ( xviii ) ac 3 phase, 4 wire, 40 200amp lt electronic trivector accuracy class 1.0 dlms compliant category a meter with inbuilt cts and inbuilt gsm / gprs modem for di rating upto 100 kva ( xix ) structure for d.t meter ( xx ) ac 3 phase dtr meter complete set above 100kva 400 / 5a ( xxi ) lt electronic trivector meter 40 200 amp. ( xxii ) 11 kv / 110, 3 phase 4 wire accuracy class dlms compliant trivector energy meter ratio 200 / 5a ( xxiii ) 11 kv / 110, 3 phase 4 wire accuracy class dlms compliant trivector energy meter ratio 400 / 5a ( xxiv ) 11 kv / 110, 3 phase 4 wire accuracy class dlms compliant trivector energy meter ratio 600 / 5a ( xxv ) 33 kv / 110, 3 phase 4 wire accuracy class dlms compliant trivector energy meter ratio 400 / 1a ( xxvi ) 33 kv / 110, 3 phase 4 wire accuracy class dlms compliant trivector energy meter ratio 600 / 1a ( xxvii ) 33kv / 110v , 3 phase, 4 wire , accuracy class 0.5 ct pt, combined metering unit for feeder, ratio 400 / 1a ( xxviii ) 11kv / 110, 3 phase, 4 wire , accuracy class 0.5 ct pt, combined metering unit for feeder, ratio 400 / 5a ( xxix ) 11 kv / 110 v 3 phase 4 wire accuracty class 0.5 ct pt combined metering unit for feeder, ratio 200 / 5 a ( xxx ) 33kv / 110v , 3 phase, 4 wire , accuracy class 0.5 ct pt, combined metering unit for feeder, ratio 600 / 1a ( xxxi ) 11 kv / 110, 3 phase 4 wire accuracty class 0.5 ct pt combined metering unit for feeder, ratio 600 / 5 a ( xxxii ) dlms compliant, single phase 2 wire 5 30 amp. 1.0 accuracy, class ac statics single phase meter with meter box ( xxxiii ) lt static energy meter, 3 phase 4 wire, direct connected, 100 amp. with meter box, class 1.0 accuracy ( xxxiv ) three phase 4 wire ac static whole current meter, electronic energy meter with box ( 10 60 ) amp 1 2 ( xxxv ) single phase electronic meter, two wire, 5 30 amp. class 1.0 accuracy with box ( xxxvi ) single phase rf meter with box as per is 13779 standards, dlms compliant ( xxxvii ) three phase rf meter with box as per is 13779 standards, dlms compliant ( xxxviii ) single phase rs 232 / 485 prepaid energy meter ( xxxix ) three phase rs 232 / 485 prepaid energy meter ( xl ) single phase rf prepaid energy meter ( xli ) three phase rf prepaid energy meter ( xlii ) single phase gprs / gsm prepaid energy meter ( xliii ) three phase gprs / gsm prepaid energy meter ( xliv ) supply of l.t. meter boxes ( metering cubicle ) with l.t cts of different ratio, class of accuracy 0.5 along with pvc wire for connection of metering. ( xlv ) l.t c.t. resin casted having ratio 100 / 5a class of accuracy 0.5 ( xlvi ) l.t c.t. resin casted having ratio 150 / 5a class of accuracy 0.5 ( xlvii ) l.t c.t. resin casted having ratio 200 / 5a class of accuracy 0.5 ( xlviii ) l.t c.t. resin casted having ratio 300 / 5a class of accuracy 0.5 ( xlix ) l.t c.t. resin casted having ratio 400 / 5a class of accuracy 0.5 ( l ) l.t c.t. resin casted having ratio 600 / 5a class of accuracy 0.5 ( li ) l.t c.t. resin casted having ratio 800 / 5a class of accuracy 0.5 ( lii ) l.t c.t. resin casted having ratio 1000 / 5a class of accuracy 0.5 ( liii ) pvc cable gland sizes 20 mm, ( liv ) pvc cable gland sizes 25 mm, ( lv ) pvc cable gland sizes 32 mm ( lvi ) pvc cable gland sizes 40 mm ( lvii ) pvc cable gland sizes 50 mm ( lviii ) pvc cable gland sizes 63 mm ( lix ) pvc cable gland sizes 75 mm m1648 gi service pipe ( i ) gi service pipe 25 mm diameter 3 mtr length ( ii ) gi service pipe 40 mm diameter 3 mtr length ( iii ) gi service pipe 60mm diameter 3 mtr length ( iv ) g.i. pipe 3 dia m1649 ring main units ( i ) 11 kv 3 way rmu, 2od + 1vl, one incomer + one breaker + one outgoing ( ii ) 11 kv 4 way rmu, 2od + 2vl, ( one incomer + two breakers + one outgoing ( iii ) 11 kv 5 way rmu, 2od + 3vl, ( one incomer + three breakers + one outgoing ) ( iv ) 11 kv 6 way rmu, 2od + 4vl, ( one incomer + four breakers + one outgoing m1650 xlpe insulated cables ( i ) 33 kv ht xlpe cable single core 630mm2 ( armoured ) ( ii ) 1c x 400mm2 cable ( 33 kv power cable ) ( iii ) 33 kv ht xlpe cable 3 core 400 sq mm ( armoured ) ( iv ) 33 kv ht xlpe cable 3 core 300mm2 ( armoured ) ( v ) 33 kv ht xlpe cable 3 core 240mm2 ( armoured ) ( vi ) 33 kv ht xlpe cable 3 core 185mm2 ( armoured ) ( vii ) 33 kv ht xlpe cable 3 core 150mm2 ( armoured ) ( viii ) 33 kv ht xlpe cable 3 core 120mm2 ( armoured ) ( ix ) 33 kv ht xlpe cable 3 core 95mm2 ( armoured ) ( x ) 33 kv ht xlpe cable 3 core 70mm2 ( armoured ) ( xi ) 33 kv ht xlpe cable 3 core 50mm2 ( armoured ) 1 2 ( xii ) 3core x 35 sq. mm cable ( xiii ) 11 kv xlpe cable single core 630mm2 ( armoured ) ( xiv ) 11 kv xlpe cable single core 120mm2 ( armoured ) ( xv ) 11 kv xlpe cable single core 70mm2 ( armoured ) ( xvi ) 11 kv xlpe cable single core 50mm2 ( armoured ) ( xvii ) 11 kv xlpe cable single core 35mm2 ( armoured ) ( xviii ) 3core x 630sq mm ( 11 kv power cable ) ( xix ) 11 kv xlpe cable 3 core 25mm2 ( armoured ) ( xx ) power cable for dt meter 120 sq.mm unarmoured ( xxi ) power cable for dt meter 240 sq.mm unarmoured ( xxii ) power cable 240 sq. mm. ( unarmoured ) ( xxiii ) xlpe cable 4 core 16 mm2 ( xxiv ) lt xlpe cable 4 core 16mm2 ( unarmoured ) ( xxv ) lt xlpe cable 4 core 25mm2 ( armoured ) ( xxvi ) lt xlpe cable 3.5 core 300mm2 ( armoured ) ( xxvii ) lt xlpe cable 3.5 core 185mm2 ( armoured ) ( xxviii ) lt xlpe cable 3.5 core 120mm2 ( armoured ) ( xxix ) lt xlpe cable 3.5 core 95 mm2 ( armoured ) ( xxx ) lt xlpe cable 3.5 core 50mm2 ( armoured ) ( xxxi ) lt xlpe cable 3.5 core 25mm2 ( armoured ) ( xxxii ) lt xlpe cable 2 core 10mm2 ( armoured ) ( xxxiii ) lt xlpe cable 2 core 6mm2 ( armoured ) ( xxxiv ) lt xlpe cable 1cx120 sqmm ( xxxv ) lt xlpe single core cable 95 mm2 ( armoured ) ( xxxvi ) lt xlpe single core cable 50 mm2 ( armoured ) ( xxxvii ) lt xlpe single core cable 25 mm2 ( armoured ) ( xxxviii ) lt xlpe cable 3.5 core 35 sq. mm. ( armoured ) ( xxxix ) lt xlpe cable 3.5 core 70 sq. mm. ( armoured ) ( xl ) lt xlpe single core 1100 v cable 1*35 sqmm ( xli ) lt xlpe single core unarmoured 1 x 35sqmm ( xlii ) lt xlpe single core unarmoured 1 x 50 sqmm ( xliii ) lt xlpe single core unarmoured 1 x 240 sqmm ( xliv ) lt xlpe single core unarmoured 1 x 400 sqmm ( xlv ) cable 2.5 core x 240 sq mm ( xlvi ) lt xlpe single core unarmoured 1 x 70 sqmm ( xlvii ) cable 2 core x 16sq mm m1651 pvc insulated cables ( i ) 10 core 2.5 sqmm armoured, stranded copper conductor, pvc insulated and pvc sheathed cable ( ii ) 6 core 2.5 sqmm armoured, stranded copper conductor, pvc insulated and pvc sheathed cable ( iii ) 3.5 core 300 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( iv ) 3.5 core 240 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( v ) 3.5 core 185 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( vi ) 3.5 core 150 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( vii ) 3.5 core 70 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( viii ) 3.5 core 35 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( ix ) 2 core 16 sq. mm armoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable 1 2 ( x ) 2 core 2.5 sqmm armoured, stranded copper conductor, pvc insulated and pvc sheathed cable ( xi ) 1 core 50 sq. mm unarmoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( xii ) 1 core 70 sq. mm unarmoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( xiii ) 1 core 120 sq. mm unarmoured, stranded aluminium conductor, pvc insulated and pvc sheathed cable ( xiv ) lt pvc cable 3.5 core 95 mm2 ( armoured ) ( xv ) lt pvc cable 3.5 core 10 mm2 ( armoured ) ( xvi ) lt pvc cable 3.5 core 6 mm2 ( armoured ) ( xvii ) lt pvc cable 2 core 16 mm2 ( armoured ) ( xviii ) lt pvc cable 2 core 10 mm2 ( armoured ) ( xix ) lt pvc cable 2 core 6 mm2 ( armoured ) ( xx ) lt pvc cable 2 core 4 mm2 ( armoured ) ( xxi ) lt pvc cable 1 core 16 mm2 ( armoured ) ( xxii ) lt pvc cable 1 core 50 mm2 ( armoured ) ( xxiii ) lt pvc cable 1 core 70 mm2 ( armoured ) ( xxiv ) lt pvc cable 1 core 150 mm2 ( armoured ) ( xxv ) lt pvc cable 1 core 300 mm2 ( armoured ) ( xxvi ) pvc single phase service cable 3.5 core 25 mm2 ( amoured ) ( xxvii ) 2.5 sq mm twin core pvc service cable ( xxviii ) 4 sq mm twin core pvc service cable ( xxix ) pvc single phase service cable 2 core 6 mm2 ( armoured ) ( xxx ) pvc single phase service cable 2 core 10 mm2 ( armoured ) ( xxxi ) pvc single phase service cable 2 core 2.5 mm2 ( unamoured ) ( xxxii ) pvc single phase service cable 2 core 4 mm2 ( unarmoured ) ( xxxiii ) pvc single phase service cable 2 core 6 mm2 ( unarmoured ) ( xxxiv ) pvc three phase service cable 4 core 6 mm2 ( armoured ) ( xxxv ) pvc three phase service cable 4 core 8 mm2 ( armoured ) ( xxxvi ) pvc three phase service cable 4 core 10 mm2 ( armoured ) ( xxxvii ) pvc three phase service cable 4 core 16 mm2 ( armoured ) ( xxxviii ) pvc three phase service cable 4 core 25 mm2 ( armoured ) ( xxxix ) pvc three phase service cable 4 core 10 mm2 ( unarmoured ) m1652 aerial bunched cables ( i ) 33 kv xlpe ht ab cable 3 core x 185mm2+240 mm2 bare messenger ( ii ) 33 kv xlpe ht ab cable 3 core x 120mm2+150 mm2 bare messenger ( iii ) 33 kv xlpe ht ab cable 3 core x 95mm2+120 mm2 bare messenger ( iv ) 11 kv xlpe ht ab cable 3cx185mm2+240mm2 bare messenger ( v ) 11 kv xlpe ht ab cable 3cx185mm2+150mm2 bare messenger ( vi ) 11 kv xlpe ht ab cable 3cx150mm2+120mm2 bare messenger ( vii ) 11kv xlpe ht ab cable 3cx120 mm2 + 95mm2 bare messenger ( viii ) 11 kv xlpe ht ab cable 3cx95mm2+80mm2 bare messenger ( ix ) 11 kv xlpe ht ab cable 3cx70mm2+70mm2 bare messenger ( x ) 11 kv xlpe ht ab cable 3cx50mm2+70mm2 bare messenger ( xi ) 11 kv xlpe ht ab cable 3cx35mm2+70mm2 bare messenger ( xii ) 11 kv xlpe ht ab cable 3cx35mm2+35mm2 bare messenger ( xiii ) lt xlpe ab cable 3cx120+1cx70+1cx16 mm2 ( xiv ) lt xlpe ab cable 3cx95 sqmm + 1x70 sqmm+1x70 sq mm ( xv ) lt xlpe ab cable 3cx95+1cx70+1cx16 mm2 ( xvi ) lt xlpe ab cable 3x70+1x50+1x16 ( street light ) mm2 ( xvii ) lt xlpe ab cable 3cx50 sqmm + 1x35 sqmm+1x16 sq mm ( xviii ) lt xlpe ab cable 3x50+1x25+1x35 mm2 ( xix ) lt xlpe ab cables 1x16 ( ph ) + 1x25 ( bare condustor + 1x16 ( insulated street lighting ) mm2 ( xx ) lt xlpe ab cable 3cx120+70mm2 ( xxi ) lt xlpe ab cable 3cx95+70mm2 ( xxii ) lt xlpe ab cable 3cx50+35mm2 ( xxiii ) lt xlpe ab cable 3cx35+25mm2 ( xxiv ) lt xlpe ab cable 3cx25+25mm2 ( xxv ) lt xlpe ab cable 3cx16+25mm2 ( xxvi ) lt xlpe ab cable 1cx16+25mm2 single phase ( xxvii ) lt xlpe ab cable 1cx35mm2 ( xxviii ) lt xlpe ab cable 1cx250mm2 ( xxix ) lt xlpe ab cable 1cx70mm2 ( xxx ) lt xlpe ab cable 1cx400mm2 m1653 ab cable accessories ( i ) 33 kv ab cable straight thru joint kit suitable for 35 70 sqmm ( ii ) 33 kv ab cable straight thru joint kit suitable for 95 120 sqmm ( iii ) 33 kv ab cable straight thru joint kit suitable for 185 sqmm ( iv ) 33 kv abc termination kit 95 120 sqmm ( v ) 33 kv abc termination kit 185 sqmm ( vi ) 33 kv abc termination kit 240 sqmm ( vii ) 11 kv ab cable straight thru joint kit suitable for 35 70 sqmm ( viii ) 11 kv ab cable straight thru joint kit suitable for 95 120 sqmm ( ix ) 11 kv abc termination kit 35 70 sqmm ( x ) 11 kv abc termination kit 95 120 sqmm ( xi ) lt pre insulated mid span joint suitable 25 mm2 phases ( xii ) lt pre insulated mid span joint suitable 35 mm2 phases ( xiii ) lt pre insulated mid span joint suitable 50 mm2 phases ( xiv ) lt pre insulated mid span joint suitable 70 mm2 phases ( xv ) lt pre insulated mid span joint suitable 95 mm2 phases ( xvi ) lt pre insulated mid span joint suitable 120 mm2 phases ( xvii ) pre insulated mid span joint suitable for 25 mm2 neutral messenger ( xviii ) pre insulated mid span joint suitable for 35 mm2 neutral messenger ( xix ) pre insulated mid span joint suitable for 50 mm2 neutral messenger ( xx ) insulation piercing connector for db charging ( xxi ) insulation piercing connector branching suitable for t joints ( xxii ) piercing connector for lt ab cable ( xxiii ) insulation piercing connector type i ( main 16 95 mm2 & tap 4 35 mm2 ) ( xxiv ) insulation piercing connector type ii ( main 16 95 mm2 & tap 16 95 sq mm ) ( xxv ) satellite connector ( xxvi ) lt ab cable accessory, 1.1mtr. stainless steel strap if207 ( 20x0.7 ) ( xxvii ) buckle for strap ( xxviii ) suspension clamp with eyehook ( xxix ) suspension clamp suitable for 25 70 sqmm baremessenger ( including 1 no. suspension clamp with bracket + 1.5 mtr ss strap + 2 nos. ss buckle ) ( xxx ) suspension clamp suitable for 35 95 sqmm bare messenger ( including 1 no. suspension clamp with bracket + 1.5 mtr ss strap + 2 nos. ss buckle ) 1 2 ( xxxi ) suspension clamp suitable for 95 150 sqmm bare messenger ( including 1 no. suspension clamp with bracket + 1.5 mtr ss strap + 2 nos. ss buckle ) ( xxxii ) dead end clamp with eyehook ( xxxiii ) dead end clamp suitable for 25 50 sqmm bare messenger ( including 1 no. dead end bracket + 1 no. dead end 1.5 mtr ss strap + 2 nos. ss buckle ) ( xxxiv ) dead end clamp suitable for 70 95 sqmm bare messenger ( including 1 no. dead end bracket + 1 no. dead end 1.5 mtr ss strap + 2 nos. ss buckle ) ( xxxv ) dead end clamp suitable for 95 150 sqmm bare messenger ( including 1 no. dead end bracket + 1 no. dead end 1.5 mtr ss strap + 2 nos. ss buckle ) ( xxxvi ) dead end clamp assembly suitable upto 25 sq.mm bare messenger ( 01 dead end clamp with bracket, 2 mtr. stainless steel straps, 02 nos. buckles ) ( xxxvii ) suspension clamp assembly suitable for 95 mm2 bare messenger ( 01 nos. suspension clamp with bracket, 2 mtr. stainless stell straps 02 nos. buckles ( xxxviii ) service main anchor clamp for proper support of service cable ( 4mm2 and 10 mm2 ) ( xxxix ) eye hook ( xl ) stainless steel strip of 20mmx1mmx1000mm with buckle clip m1654 fabricated items ( i ) hot dip galvanized fabricated iron material for 33 kv line, lt line & dss ( ii ) 33 kv pole top bracket 50x10 mm flat [ galvanized ] ( iii ) 33 kv pole top bracket [ non galvanized ] ( iv ) 11kv pole top bracket 50x8 mm flat [ galvanized ] ( v ) 11 kv pole top bracket 50x8 mm ( f type ) [ non galvanized ] ( vi ) 11 kv f clamp / bracket ( vii ) 11 kv fish plate ( viii ) 33 kv fish plate ( for st pole 13 mtr. ) ( ix ) 33kv v cross arm for ( 100x50x6 mm ) [ galvanized ] ( x ) 33 kv v cross arm ( 100x 50x 6 mm ) [ non galvanized ] ( xi ) 33 kv dp special type v cross arm ( xii ) 11kv v cross arm ( 75x40x6 mm ) , 7.14 kg per meter [ galvanized ] ( xiii ) 11 kv v cross arm ( 75 x 40 x6 mm ) [ non galvanized ] ( xiv ) 11 kv guarding channel ( 75x40x6 mm ) ( xv ) 33 kv guarding channel ( 100x50x6mm ) ( xvi ) ms angle ( 65x65x6 mm ) for guarding of 33 kv, 11 kv, l.t line [ galvanized ] ( xvii ) ms angle ( 65x65x6 mm ) for guarding of 33 kv, 11 kv, l.t line [ non galvanized ] ( xviii ) top channel set ( 100x50x6 mm ) 9.56 kg per meter [ galvanized ] ( xix ) top channel set ( 100x50x6 mm ) 9.56 kg per meter [ non galvanized ] ( xx ) ms channel for ab switch ( 100x50x6 mm ) [ galvanized ] ( xxi ) ms channel ab switch ( 100x50x6 mm ) [ non galvanized ] ( xxii ) 33kv d p channel ( 100x50x6 mm ) 3150 mm long [ galvanized ] ( xxiii ) 33kv d p channel ( 100x50x6 mm ) 2200 mm long [ galvanized ] ( xxiv ) 33kv d p channel ( 100x50x6 mm ) 1.3 meter long [ galvanized ] ( xxv ) 33 kv d.p channel ( 100x50x6 mm ) 1.3 meter [ non galvanized ] ( xxvi ) 11kv d p channel ( 75x40x6 mm ) [ galvanized ] ( xxvii ) 11kv d.p channel ( 75x40x6mm ) [ non galvanized ] ( xxviii ) transformer base channel ( 100x50x6 mm ) [ galvanized ] ( xxix ) transformer base channel ( 100x50x6 mm ) [ non galvanized ] ( xxx ) transformer belting ( 50x50x6 mm ) & belting support ( 40x40x6 mm ) [ galvanized ] ( xxxi ) transformer belting ( 50x50x6 mm ) & belting support ( 40x40x6 mm ) [ non galvanized ] ( xxxii ) back clamp ( 50x6 mm ) for 60kg rail pole [ galvanized ] ( xxxiii ) back clamp ( 50x6 mm ) for 60kg rail pole [ non galvanized ] ( xxxiv ) back clamp ( 50x6 mm ) for9 mtr 400kg psc pole [ galvanized ] ( xxxv ) back clamp ( 50x6 mm ) for 9mtr 400kg psc pole [ non galvanized ] ( xxxvi ) back clamp ( 50x6 mm ) for 8 mtr 200kg psc pole [ galvanized ] ( xxxvii ) back clamp ( 50x6 mm ) for 8 mtr 200kg psc pole [ non galvanized ] ( xxxviii ) back clamp ( 50x6 mm ) for tublar pole [ galvanized ] ( xxxix ) back clamp ( 50x6 mm ) for tublar pole [ non galvanized ] ( xl ) support clamp for v cross arm for 60kg rail pole [ galvanized ] ( xli ) support clamp for v cross arm for 60kg rail pole [ non galvanized ] ( xlii ) support clamp for v cross arm for 9 mtr 400kg psc pole [ galvanized ] ( xliii ) support clamp for v cross arm for 9 mtr 400kg psc pole [ non galvanized ] ( xliv ) support clamp for v cross arm for 8 mtr 200kg psc pole [ galvanized ] ( xlv ) support clamp for v cross arm for 8 mtr 200kg psc pole [ non galvanized ] ( xlvi ) support clamp for v cross arm for tublar pole [ galvanized ] ( xlvii ) support clamp for v cross arm for tublar pole [ non galvanized ] ( xlviii ) back clamp for 33 kv dp special type v cross arm ( xlix ) back clamp ( 50x6 mm ) jointing / packing piece for 60kg rail pole [ galvanized ] ( l ) back clamp ( 50x6 mm ) jointing / packing piece for 60kg rail pole [ non galvanized ] ( li ) back clamp ( 50x6 mm ) jointing / packing piece for 9 mtr 400kg psc pole [ galvanized ] ( lii ) back clamp ( 50x6 mm ) jointing / packing piece for 9 mtr 400kg psc pole [ non galvanized ] ( liii ) back clamp ( 50x6 mm ) jointing / packing piece for 8 mtr 200kg psc pole [ galvanized ] ( liv ) back clamp ( 50x6 mm ) jointing / packing piece for 8 mtr 200kg psc pole [ non galvanized ] ( lv ) back clamp ( 50x6 mm ) jointing / packing piece for tublar pole [ galvanized ] ( lvi ) back clamp ( 50x6 mm ) jointing / packing piece for tublar pole [ non galvanized ] ( lvii ) clamp for top channel 50x6 mm flat for 60kg rail pole [ galvanized ] ( lviii ) clamp for top channel 50x6 mm flat for 60kg rail pole [ non galvanized ] ( lix ) clamp for top channel 50x6 mm flat for 9 mtr 400kg psc pole [ galvanized ] ( lx ) clamp for top channel 50x6 mm flat for 9 mtr 400kg psc pole [ non galvanized ] ( lxi ) clamp for top channel 50x6 mm flat for 8 mtr 200kg psc pole [ galvanized ] ( lxii ) clamp for top channel 50x6 mm flat for 8 mtr 200kg psc pole [ non galvanized ] ( lxiii ) clamp for top channel 50x6 mm flat for tublar pole [ galvanized ] ( lxiv ) clamp for top channel 50x6 mm flat for tublar pole [ non galvanized ] ( lxv ) clamp for ab switch base channel ( 50x6 mm ) ( 1 set for 2 pair ) for 60kg rail pole [ galvanized ] ( lxvi ) clamp for ab switch base channel ( 50x6 mm ) ( 1 set for 2 pair ) for 60kg rail pole [ non galvanized ] ( lxvii ) clamp for ab switch base channel ( 50x6 mm ) ( 1 set for 2 pair ) for 9 mtr 400kg psc pole [ galvanized ] ( lxviii ) clamp for ab switch base channel ( 50x6 mm ) ( 1 set for 2 pair ) for 9 mtr 400kg psc pole [ non galvanized ] ( lxix ) clamp for ab switch base channel ( 50x6 mm ) ( 1 set for 2 pair ) for 8 mtr 200kg psc pole [ galvanized ] ( lxx ) clamp for ab switch base channel ( 50x6 mm ) ( 1 set for 2 pair ) for 8 mtr 200kg psc pole [ non galvanized ] ( lxxi ) clamp for ab switch base channel ( 50x6 mm ) ( 1 set for 2 pair ) for tublar pole [ galvanized ] ( lxxii ) clamp for ab switch base channel ( 50x6 mm ) ( 1 set for 2 pair ) for tublar pole [ non galvanized ] ( lxxiii ) ms channel ( 75x40x6 mm ) for supporting h.g fuse & l.a [ galvanized ] ( lxxiv ) ms channel ( 75x40x6 mm ) for supporting h.g fuse & l.a [ non galvanized ] ( lxxv ) clamp ( 50 x 6 mm ) for transformer base channel [ galvanized ] ( lxxvi ) clamp ( 50 x 6 mm ) for transformer base channel [ non galvanized ] ( lxxvii ) clamp ( 50 x 6 mm ) for transformer belting [ galvanized ] ( lxxviii ) clamp ( 50 x 6 mm ) for transformer belting [ non galvanized ] ( lxxix ) clamp ( 50 x 6 mm ) for lt bus & h.g fuse set [ galvanized ] ( lxxx ) clamp ( 50 x 6 mm ) for lt bus & h.g fuse set [ non galvanized ] ( lxxxi ) d p channel support clamp ( 50x6 mm ) feet ( 1 pair = 1 set ) for 60kg rail pole [ galvanized ] ( lxxxii ) d.p channel support clamp ( 50x6 mm ) ) for 60kg rail pole [ non galvanized ] ( lxxxiii ) d p channel support clamp ( 50x6 mm ) feet ( 1 pair = 1 set ) for 9 mtr 400kg psc pole [ galvanized ] ( lxxxiv ) d.p channel support clamp ( 50x6 mm ) for 9 mtr 400kg psc pole [ non galvanized ] ( lxxxv ) d p channel support clamp ( 50x6 mm ) feet ( 1 pair = 1 set ) for 8 mtr 200kg psc pole [ galvanized ] ( lxxxvi ) d.p channel support clamp ( 50x6 mm ) for 8 mtr 200kg psc pole [ nongalvanized ] ( lxxxvii ) d p channel support clamp ( 50x6 mm ) feet ( 1 pair = 1 set ) for tublar pole [ galvanized ] ( lxxxviii ) d p channel support clamp ( 50x6 mm ) feet ( 1 pair = 1 set ) for tublar pole [ non galvanized ] ( lxxxix ) d p channel clamp ( 40x6 mm ) flat for 60 kg rail pole [ galvanized ] ( xc ) d p channel clamp ( 40x6 mm ) flat for 60 kg rail pole [ non galvanized ] ( xci ) d p channel clamp ( 40x6 mm ) flat 9 mtr 400kg psc pole [ galvanized ] ( xcii ) d p channel clamp ( 40x6 mm ) flat 9 mtr 400kg psc pole [ non galvanized ] ( xciii ) d p channel clamp ( 40x6 mm ) flat 8 mtr 200kg psc pole [ galvanized ] ( xciv ) d p channel clamp ( 40x6 mm ) flat 8 mtr 200kg psc pole [ non galvanized ] ( xcv ) d p channel clamp ( 40x6 mm ) flat for tublar pole [ galvanized ] ( xcvi ) d p channel clamp ( 40x6 mm ) flat for tublar pole [ non galvanized ] ( xcvii ) 33kv cross bracing for d p structure [ galvanized ] ( xcviii ) 33 kv cross bracing for dp channel [ non galvanized ] ( xcix ) 11 kv cross bracing for d p structure [ galvanized ] ( c ) 11 kv cross bracing for d p structure [ non galvanized ] ( ci ) clamp for cross bracing set of 2 pair for 60kg rail pole [ galvanized ] ( cii ) clamp for cross bracing set of 2 pair for 60kg rail pole [ non galvanized ] ( ciii ) clamp for cross bracing set of 2 pair for 9 mtr 400kg psc pole [ galvanized ] ( civ ) clamp for cross bracing set of 2 pair for 9 mtr 400kg psc pole [ non galvanized ] ( cv ) clamp for cross bracing set of 2 pair for 8 mtr 200kg psc pole [ galvanized ] ( cvi ) clamp for cross bracing set of 2 pair for 8 mtr 200kg psc pole non [ galvanized ] ( cvii ) clamp for cross bracing set of 2 pair for tublar pole [ galvanized ] ( cviii ) clamp for cross bracing set of 2 pair for tublar pole [ non galvanized ] ( cix ) support clamp for cross bracing for 60kg rail pole [ galvanized ] ( cx ) support clamp for cross bracing for 60kg rail pole [ non galvanized ] ( cxi ) support clamp for cross bracing for 9 mtr 400kg psc pole [ galvanized ] ( cxii ) support clamp for cross bracing for 9 mtr 400kg psc pole [ non galvanized ] ( cxiii ) support clamp for cross bracing for 8 mtr 200kg psc pole [ galvanized ] ( cxiv ) support clamp for cross bracing for 8 mtr 200kg psc pole [ non galvanized ] ( cxv ) support clamp for cross bracing for tublar pole [ galvanized ] ( cxvi ) support clamp for cross bracing for tublar pole [ non galvanized ] ( cxvii ) angle / side stay clamp ( 50x6 mm ) for 60kg rail pole [ galvanized ] ( cxviii ) angle / side stay clamp ( 50x6 mm ) for 60kg rail pole [ non galvanized ] ( cxix ) angle / side stay clamp ( 50x10 mm ) for 9 mtr 400kg psc pole [ galvanized ] ( cxx ) angle / side stay clamp ( 50x10 mm ) for 9 mtr 400kg psc pole [ non galvanized ] ( cxxi ) angle / side stay clamp ( 50x6 mm ) for 8 mtr 200kg psc pole [ galvanized ] ( cxxii ) angle / side stay clamp ( 50x6 mm ) for 8 mtr 200kg psc pole [ non galvanized ] ( cxxiii ) angle / side stay clamp ( 50x6 mm ) for tublar pole [ galvanized ] ( cxxiv ) angle / side stay clamp ( 50 x 6 mm ) for tublar pole [ non galvanized ] ( cxxv ) clamp for g.i. pipe ( cxxvi ) ms flat ( 75x40x6 mm ) [ galvanized ] ( cxxvii ) ms flat ( 75x40x6 mm ) [ non galvanized ] ( cxxviii ) earth clamp for earthwire ( 50 x 6 mm ) [ galvanized ] ( cxxix ) earth clamp for earthwire ( 50 x 6 mm ) [ non galvanized ] ( cxxx ) ms angle for lt distribution bus ( 35x35x6 mm ) 1 set for 2 pair [ galvanized ] ( cxxxi ) ms angle for l t distribution bus ( 35 x 35 x6 mm ) [ non galvanized ] ( cxxxii ) lt bracket vertical formation ( cxxxiii ) lt bracket for tapping point ( cxxxiv ) lt angle bracket ( 35x35x6 mm ) [ galvanized ] ( cxxxv ) lt angle bracket ( 35 x 35 x 6 mm ) [ non galvanized ] ( cxxxvi ) ms flat 35x6 mm ( d ring ) for 10 connections [ galvanized ] ( cxxxvii ) ms flat 35x6 mm ( d ring ) for 10 connections [ non galvanized ] ( cxxxviii ) pole clamp for i hook b type ( cxxxix ) lt back clamp ( 50 x 6 mm ) for lt angle [ galvanized ] ( cxl ) lt back clamp ( 50 x 6 mm ) for lt angle [ non galvanized ] ( cxli ) u clamp ( 40 x 6 mm ) [ galvanized ] ( cxlii ) u clamp ( 40 x 6 mm ) [ non galvanized ] ( cxliii ) 50 x 6 mm galvanized gi flat ( risers ) ( cxliv ) 25 x 3 mm galvanized gi flat ( risers ) m1655 d.o. fuse ( i ) 11 kv d.o. fuse unit ( polymer type ) ( ii ) 33 kv d.o. fuse unit ( polymer type ) m1656 electrical conduit ( pipes ) ( i ) gi pipe 4 medium duty ( b class ) ( ii ) gi pipe 6 medium duty ( b class ) ( iii ) gi pipe 8 medium duty ( b class ) ( iv ) hume pipe rcc pipe 100 mm ( np2 class ) ( v ) hume pipe rcc pipe 150 mm ( np2 class ) ( vi ) hume pipe rcc pipe 200 mm ( np3 class ) m1657 heat shrinkable kit ( i ) 33 kv 3 core xlpe ug cable heat shrinkable straight through jointing kit suitable for 400 mm2 ( ii ) 33 kv 3 core xlpe ug cable heat shrinkable straight through jointing kit suitable for 300 mm2 ( iii ) 33 kv 3 core xlpe ug cable heat shrinkable straight through jointing kit suitable for 240mm2 ( iv ) 33 kv 3 core xlpe ug cable heat shrinkable straight through jointing kit suitable for 185 mm2 ( v ) 33 kv termination kit for 1core x 400mm2 ( vi ) 11 kv termination kit for 3core x 630mm2 ( vii ) in door heat shrink type cable termination kit 11kv ht xlpecable 1cx 630 sqmm ( armoured ) ( viii ) out door heat shrink type cable termination kit 11kv ht xlpecable 1cx 630 sqmm ( armoured ) ( ix ) lt xlpe 3 3.5 4 core heat shrinkable straight through cable jointing kit 400 mm2 ( x ) lt xlpe 3 3.5 4 core heat shrinkable straight through cable jointing kit 300 185 mm2 ( xi ) lt xlpe 3 3.5 4 core heat shrinkable straight through cable jointing kit 150 70 mm2 ( xii ) lt xlpe 3 3.5 4 core heat shrinkable straight through cable jointing kit 50 25 mm2 ( xiii ) lt xlpe 3 3.5 4 core heat shrinkable straight through cable jointing kit 4 16 mm2 ( xiv ) lt xlpe 3 3.5 4 core heat shrinkable indoor outdoor cable jointing kit 400 mm2 ( xv ) lt xlpe 3 3.5 4 core heat shrinkable indoor outdoor cable jointing kit 185 300 mm2 ( xvi ) lt xlpe 3 3.5 4 core heat shrinkable indoor outdoor cable jointing kit 70 150 mm2 ( xvii ) lt xlpe 3 3.5 4 core heat shrinkable indoor outdoor cable jointing kit 25 50 mm2 ( xviii ) lt xlpe 3 3.5 4 core heat shrinkable indoor outdoor cable jointing kit 4 16 mm2 m1658 ug cables related material ( i ) pillar box cum consumer service distribution box one time lock system ( 1 no. 3 ph 4 wire incoming and 5 nos. 3ph 4 wire outgoing ) ( ii ) cable marker ( metal ) m1659 ( ) ab switch contact ( i ) male female contact of 33 kv ab switch 600 630 amp ( ii ) male female contact of 33 kv ab switch 400 amp ( iii ) male female contact of 33 kv ab switch 200 amp ( iv ) male female contact of 11 kv ab switch 800 amp ( v ) male female contact of 11 kv ab switch 600 amp ( vi ) male female contact of 11 kv ab switch 400 amp ( vii ) male female contact of 11 kv ab switch 200 amp m1660 testing equipment ( i ) accuchek meter high accuracy ( 0.2% in director mode / 0.5% in clamp on mode ) for kwh, kvarh and kvah maximum current up to 6a in direct mode and up to 500a in clamp on mode. lt+ : to test lt whole current single phase meters up to 60a ( ii ) accuchek meter high accuracy ( 0.2% in director mode / 0.5% in clamp on mode ) for kwh, kvarh and kvah maximum current up to 6a in direct mode and up to 500a in clamp on mode. lt+ : to test lt 3 phase & ct operated energy meters ( iii ) accuchek meter high accuracy ( 0.2% in director mode / 0.5% in clamp on mode ) for kwh for ht+ : to test meters suitable for ht, 3 phase, 3 wire and 4 wire systems ( iv ) eh ii chain electric hoist ( capacity 1 ton, standard lift 3 mtr ) with 1.5 hp motor ( v ) electronic weighing machine with 1.2x1.2 mtr. platform, suitable for weighing limit upto 2 tons ( vi ) electronic weighing machine with 2x2 mtr. platform, suitable for weighing limit upto 4 tons ( vii ) earth tester 200 amp. 2000 ohm ( digital ) ( viii ) 500 v megger ( ix ) 2.5 / 5 kv megger ( mannual ) ( x ) digital clamp meter ( meco 3150 ) ( xi ) digital tong tester ( 1000 amp., 500 v ) with associated accessories. ( xii ) digital multi meter ( 10 amp along with ma range ) ( xiii ) 2.5 kv motorised with range up to 20000 mega ohms ( xiv ) 2.5 kv motorised cum manual with range up to 20000 mega ohms ( xv ) 5 kv motorised with range up to 100000 mega ohms ( xvi ) 5 kv motorised cum manual with range up to 100000 mega ohms m1661 tool kit ( i ) adhesive insulation tape ( ii ) high temperature tape ( iii ) dicharge rod for 33 kv / 11kv ( iv ) screw driver set 840 ( v ) screw driver set 935 ( vi ) neon tester 813 ( vii ) hammer 200 gm ( viii ) hack saw frame ( ix ) hack saw blades ( x ) adjustable spanner ( xi ) wire stripper ( xii ) combinational plier ( xiii ) side cutting plier ( xiv ) measuring tape ( xv ) hand drill machine ( xvi ) punch ( xvii ) knife ( xviii ) spanner set ( xix ) tool bag ( xx ) nose plier ( xxi ) drill bit 3 / 10 concrete ( jk ) ( xxii ) chain pulley 5ton with 15 meter chain ( xxiii ) max pulley 10 ton m1662 civil works ( i ) opc cement ( ii ) earth work in excavation in foundation trenches ( along with disposal of excavated earth upto 50m, removing tree roots and shrubs ) ( for normal soil ) ( iii ) earth work in excavation in foundation trenches ( along with disposal of excavated earth upto 50m, removing tree roots and shrubs ) ( for rocky soil ) ( iv ) filling in foundation trenches and plenth in layers not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m and lift of 1.5 m all complete as per building specification and direction of e / i ( v ) providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all material labor, royalty and taxes all complete as per building specification and direction of e / i” ( vi ) brick flat soling ( vii ) providing p.c.c.m 150 in nominal mix ( 1:2:4 ) in foundation with quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m 2.5 to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating, striking, curing, taxes and royalty all complete as perbuilding specification and direction of engineer in charge ( viii ) providing p.c.c.m 100 in nominal mix ( 1:3:6 ) in foundation with quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m 2.5 to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating, striking, curing, taxes and royalty all complete as perbuilding specification and direction of engineer in charge ( ix ) providing p.c.c.m 75 in nominal mix ( 1:4:8 ) in foundation with quality of stone chips 20mm to 6mm size graded and clean coarse sand of f.m 2.5 to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating, striking, curing, taxes and royalty all complete as perbuilding specification and direction of engineer in charge ( x ) providing r.c.c.m 150 with nominal mix ( 1:2:4 ) in foundation and plinth and with quality stone chips 20mm to 6mm size graded and clean coarse sand of f.m. 2.5 to 3 incuding screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing ( but excluding the cost of reinforcement, taxed and royalty all complete, as per building specification and direction of e / i. ) m1663 ( ) scada related materials ( a ) scada server ( i ) fep server with interface switches for rtus and frtus ( ii ) isr server { data server } ( iii ) nms server { dms server } ( iv ) dts server ( only at ranchi ) ( v ) developmental server ( vi ) communication server ( vii ) web / directory server ( viii ) workstation with dual tft monitors ( ix ) led based video projection system with 2x3 module configuration with each module at least 67 diagonal with common projector ( x ) 33 kv or 11 kv control and relay panel, scada compatable for feeder protection ( 1f ) ( xi ) 33 kv or 11 kv control and relay panel, scada compatable for transformer protection ( it ) with o / c +e / f + diff relay ( xii ) 33 kv or 11 kv control and relay panel, scada compatable for feeder protection ( 2f ) ( xiii ) buchholz relay contact ( xiv ) minimum oil gauge ( xv ) scada compatible winding temp. indicator ( xvi ) scada compatible oil temp. indicator ( xvii ) rtu base equipment comprising panels, racks, sub racks, powe suppy modules, cpu, analog and digital input control output modules, interfacing mft using rs 485 modbus protocol and 2 ethernet ports + 4 serial ports ( rs232 / 485 ) , required a d converters and all other accessories required ( xviii ) dc voltage transducer ( xix ) rtu base and foundation ( base should be capable of withstanding 200 kg. load ) ( xx ) multi function transducers ( 5 amps, 110 v with rs 485 modbus communication protocol ) ( xxi ) type a frtu for 5 way rmus ( xxii ) type a frtu for 4 way rmus ( xxiii ) type b frtu for 3 way rmus ( xxiv ) type c frtu for 2 way rmus ( xxv ) routers 230 v ac, 2 ge ports, 48xfe, wan speed 200 mbps ( xxvi ) ethernet switch ( xxvii ) 2 mbps vpn link for connectivity for s / s with scada control center ( xxviii ) ldms ( xxix ) 2 kva ups ( for ldms ) with 160 ah battery, 72 v battery set ( xxx ) 6 kva ups ( xxxi ) gsm / gprs modem along with accessories ( xxxii ) 5 kva ups ( xxxiii ) 12 u network rack ( xxxiv ) hp eio code ( xxxv ) interrupter ( xxxvi ) cmri 3phase ( xxxvii ) b / w laser printer for ldms ( xxxviii ) 48 v dc power supply system based on smps for rtu & comm. equipment with 80 ah battery ( xxxix ) cat 6 cable ( xl ) ldms software ( xli ) numerical relay scada compatible for power transformer protection ( xlii ) numerical relay scada compatible for 33kv and 11 kv feeder protection ( xliii ) mcu module card ( xliv ) power module card ( xlv ) di card ( xlvi ) do card ( xlvii ) ai card ( xlviii ) com 6 card ( xlix ) rmu 3 way ( 1 incomer, 1 outgoing and 1 breaker ) scada compatible ( l ) rmu 5 way ( 1 incomer, 1 outgoing and 3 breakers ) scada compatible ( li ) 11 kv sectionalizer ( lii ) 11 kv auto reclosure ( liii ) gprs / cdma / edge / 3g modem ( liv ) heavy duty relay for cb trip / close ( 48 v dc, 2 no, 1 nc ) ( lv ) 48 v dcps at rtu locations along with vrla batteries ( lvi ) 11 kv stand alone fault passage indicator complete with gprs enabled modem ( scada compatible ) ( lvii ) 33 kv stand alone fault passage indicator complete with gprs enabled modem ( scada compatible ) ( b ) storage & backup devices ( i ) external raid mass storage device ( for 2 months online backup ) ( ii ) external dat drive ( c ) switches ( i ) layer ii switch ( scada / dms lan ) ( 48 ports ) ( ii ) layer switch ( planning & development system lan ) ( 24 ports ) ( d ) other active devices ( i ) gps time synchronization system ( ii ) time, day & date digital displays ( e ) printers ( i ) a3 color inkjet printer ( ii ) b / w laser printer ( iii ) color laser printer ( f ) security system ( dmz ) ( i ) web server with load balancing ( ii ) mail server ( 1+1 ) included in it system ( iii ) firewall & network ids / ips in pair ( 2 nos. ) ( g ) cabling system ( i ) cable, jacks, hubs, etc. ( ii ) acdb for control centre ( iii ) kvm switch ( iv ) panels ( h ) software for control centre ( i ) scada software ( ii ) isr software ( iii ) dms software ( iv ) dts software ( v ) developmental software ( vi ) network management software ( vii ) web / network security software ( included in it package ) ( viii ) rdbms package ( included in isr ) ( ix ) gis adaptor / engine for importing data from gis system under it system ( i ) form: f 4: rtu:rtu type b 33 / 11 kv sub stations ( i ) rtu base equipment comprising panels, racks, sub racks, power supply modules, cpu, analog and digital input control output modules, interfacing equipments for interfacing mfts using rs 485 modbus protocol and 2 eathernet ports, required a d converters & all other required items / accessories including complete wiring for all modules for locations mentioned for type b rtus ( ii ) multifunction transducers ( mfts ) ( iii ) contact multiplying relays ( cmrs ) ( iv ) heavy duty relays ( hdrs ) for cb trip / close and rise and lower of oltc ( v ) weather transducer wind speed ( vi ) weather transducer rainfall ( vii ) weather transducer humidity ( viii ) weather transducer temperature ( ix ) weather transducer wind direction ( x ) router for rtus at dc power supply ( xi ) oltc transducers ( xii ) dc current transducer ( xiii ) dc voltage transducer ( xiv ) acdb with sufficient mccbs ( j ) test equipments for rtu ( i ) rtu database configuration & maintenance software tool ( ii ) master station cum rtu simulator & protocol analyzer software tool ( iii ) laptop pc for above software tools along with interfacing hardware including hub ( k ) form: f 5:frtu / frtus ( i ) mini frtu base equipment along with enclosuress suitable to work in open environment withadequate protection to water & dust, with racks, sub racks, power supply modulesi / o modules, cpu, interfacing equipments, required a d converters & all other required items / accessories including complete wiring for all modules for frtu locations. ( ii ) type a frtu for 5 way rmus ( iii ) type a1 frtu for 4 way rmus ( iv ) type b frtu for 3 way rmus ( v ) type c frtu for sectionalizers ( vi ) mfts ( vii ) contact multiplying relays ( cmrs ) ( viii ) heavy duty relays for cb trip / close ( l ) test equipments for frtu ( i ) frtu database configuration & maintenance software tool ( ii ) master station cum frtu simulator & protocol analyzer software tool ( iii ) laptop pc for above software tools along with interfacing hardware including hub ( m ) f4: gprs / cdma / edge / 3gmodems ( i ) gprs ( ii ) cdma for frtu locations + 3 at hub ( no back up to rtus allowed ) ( iii ) edge ( iv ) 3g ( n ) form: f 7: auxiliary power supply system ( aps ) ( i ) 20 kva ups ( 1+1 ) with vrla batteries to give 4 hrs back up ( ii ) dc power supply ( dcps ) system based on smps ( for 20 a load plus charging current@10% capacity ) with vrla batteries to give 4 hrs back up. ( iii ) 10 kva ups ( 1+1 ) with vrla batteries to give 4 hrs back up ( iv ) dc power supply ( dcps ) system based on smps ( for 20 a load plus charging current@10% capacity ) with vrla batteries to give 4 hrs back up. ( v ) 2 kva ups for rtu locations / ldms ( vi ) 48 v dcps at rtu locations along with vrla batteries ( vii ) 24 / 48 v dcps for frtu locations along with vrla batteries ( o ) cards for rtu and frtu ( i ) mcu 1 a module card of rtu ( ii ) mcu 4 a module card of rtu ( iii ) comm module card of rtu ( iv ) power module card of rtu ( v ) di card of rtu ( vi ) do card of rtu ( vii ) ai card of rtu ( viii ) mcu module card of frtu ( ix ) power module card of frtu ( x ) di card of frtu ( xi ) do card of frtu m1664 safety equipment ( i ) rechargeable led hand torch ( ii ) safety helmet pvc ( iii ) safety shoes ( electrical safety ) ( iv ) rubber hand gloves ( 1.1kv ) commander ( v ) safety double adjustable belts ( karam ) ( vi ) safety items as per the requirement of electrical inspector as under first aid box, shock treatment chart, rubber matts 8 mm thick, 4 fire buckets with sand & m.s. hooks / stand, helmet, hand gloves and, fire extinguisher ( 2 nos ) m1665 fire extinguishers ( i ) i kg dry chemical powder ( map 50% ) ; fire rating : 1a, 8b ( ii ) 2 kg dry chemical powder ( map 50% ) ; fire rating: 2a, 8b ( iii ) 4 kg dry chemical powder ( map 50% ) ; fire rating : 2a, 21b ( iv ) 6 kg dry chemical powder ( map 50% ) ; fire rating: 3a, 34b ( v ) 9 kg dry chemical powder ( map 50% ) fire rating: 4a, 55b ( vi ) 6 ltr water type; fire rating : 2a 1 2 ( vii ) 9 ltr water type, fire rating: 3a ( viii ) 6 ltr mechanical foam type, fire rating: 2a, 21b ( ix ) 9 ltr mechanical foam type, fire rating: 4a, 34b ( x ) 2 kg carbon dioxide type, fire rating: 8b ( xi ) 3 kg carbon dioxide type, fire rating: 13b ( xii ) 4.5 kg carbon dioxide type, fire rating: 21b ( xiii ) 6.5 kg carbon dioxide type, fire rating: 55b ( xiv ) 9 kg carbon dioxide type, fire rating: 70b ( xv ) 22.5 kg carbon dioxide type, fire rating: 70b ( xvi ) gas pressure ctc fire extinguisher ( xvii ) fire buckets ( capacity 10 ltrs. ) m1666 ( ) feeder pillar / smdb / distribution board ( i ) lt mini feeder pillar ( simple with fuse arrangement ) ( aluminium bus ) ( ii ) smdb ( 1 in, 3 out ) with housing 5 nos 20 amp spn mcb, ( iii ) tpn distribution board 12 way, 50 amp tpn mcb, ( iv ) tpn distribution board 12 way, 100 amp tpn mcb, ( v ) tpn distribution board 12 way, 150 amp tpn mcb, ( vi ) lt feeder piller box for 1 phase 8 connection made of m.s.sheet. ( vii ) lt feeder piller box for 1 phase 12 connection made of m.s.sheet. ( viii ) lt feeder piller box for 3 phase 4 connection made of m.s.sheet. ( ix ) lt feeder piller box for 3 phase 8 connection made of m.s.sheet. ( x ) lt feeder pillar ( simple with fuse arrangement ) ( aluminium bus ) m1667 ( a ) aluminium end terminal ( i ) 10 sq mm ( ii ) 225 sq mm m1668 other misc. equipment ( i ) earthing g.i.strip ( 65x6 ) mm2 ( ii ) rain coat ( iii ) rubber mat along length of pannel ( iv ) aluminium pipe 40 mm dia ( v ) 400 watt / 250 v hpsv lamp fitting complete for 33 / 11 kv pss yard lightining ( vi ) 30 v 80 ah battery charging unit complete with battery and stand ( vii ) 30 volts 100 ah lead acid battery with battery charger and stand ( viii ) 30v, 40 amp. float cum boost battery charger with full wave rectification for 230 v, 1 phase, 50 hz ac input supply as per technical specifications. ( ix ) polycarbonate seal bit ( x ) sticker seal with hologram ( xi ) earth knob ( xii ) ms earth mat for switch yard ( xiii ) rail piece 44.64kg / m 6.92 meter long for power transformer ( xiv ) aluminium binding wire ( xv ) gi wire no. 6 / 8 / 10 ( xvi ) t / c fuse wire 12 / 14 / 16 / 18 / 22 / 28 / 32 swg ( xvii ) m s nuts & bolts of different size ( xviii ) galvanised nuts & bolts ( assorted size ) ( xix ) jointing sleeves ( alumnium ) suitable for 34 / 55 sq.mm ( xx ) jointing sleeves ( alumnium ) suitable for 70 100 sq.mm ( xxi ) jointing sleeves ( alumnium ) suitable for 150 232 sq.mm ( xxii ) anticlimbing device ( barbed wire ) 2x12 swg ( xxiii ) al paint ( xxiv ) red oxide paint ( xxv ) lt phase seperator ( xxvi ) 3 mm thick ms plate with weight of 0.36 kg asset tag ( xxvii ) transformer oil ( ehv grade ) ( xxviii ) natural ester oil ( xxix ) c wedge connector for 0.2sq panther conductor ( nominal aluminum area 200mm2 ) ( xxx ) fault locator machine for ug cables ( flc ) without vehicle ( xxxi ) transformer oil testing kit ( 220 / 230 ac ) ( xxxii ) transformer oil filter machine ( 500 gph ) ( b ) furniture ( i ) godrej thrive mid back revolving chair size:75cm ( w ) x 75cm ( d ) x 100cm 109cm ( h ) x 45cm 54cm ( seat height ) . ( ii ) godrej thrive non revolving visitor chair size:63.5cm ( w ) x 59.5cm ( d ) x 97.5cm ( h ) x 42.5cm ( seat height ) . ( iii ) godrej regency non revolving visitor chair with armrest size:59cm ( w ) x 63cm ( d ) x 81.5cm ( h ) x 45cm ( seat height ) . ( iv ) godrej regency mid back revolving chair size:76.3cm ( w ) x 76.3cm ( d ) x 78.5cm 90.5cm ( h ) x 44.2cm 54.2cm ( seat height ) . ( v ) godrej bravo mid back revolving chair size:76.3cm ( w ) x 76.3cm ( d ) x 85.5cm 97.5cm ( h ) x 42.5cm 54.5cm ( seat height ) . ( vi ) godrej la sede high back revolving chair size:76.1cm ( w ) x 76.1cm ( d ) x 114.5cm 131.5cm ( h ) x 44.5cm 54.5cm height ) . ( vii ) godrej la sede non revolving visitor chair size:60.9cm ( w ) x 64.7cm ( d ) x 98.2cm ( h ) x 46.2cm ( seat height ) . ( viii ) godrej halo very high back revolving chair size:77cm ( w ) x 77cm ( d ) x 134.9cm 143.9cm ( h ) x 49.9cm 58.9cm ( height ) . ( ix ) godrej halo non revolving visitor chair size:59cm ( w ) x 68.5cm ( d ) x 89.5cm ( h ) x 46.5cm ( seat height ) . ( x ) godrej unlearn single seater cpu / laptop table for computer training hall size: 90cm ( w ) x 60cm ( d ) x 68cm ( h ) ( xi ) godrej unlearn 2 seater laptop table for meeting hall size:135cm ( w ) x 60cm ( d ) x 68cm ( h ) ( xii ) godrej unlearn 4 seater laptop table for meeting hall size:270cm ( w ) x 60cm ( d ) x 68cm ( h ) ( xiii ) godrej talk unitised 4 seater round table size:120cm dia x 75cm ( h ) ( xiv ) godrej talk modular conference table size:67.5cm ( w ) x 60cm ( d ) x 75cm ( h ) ( xv ) godrej enterprise table with cpu hanger size:165cm ( w ) x 90cm ( d ) x 72.8cm ( h ) ( xvi ) godrej insight table for library size:180cm ( w ) x 90cm ( d ) x 74cm ( h ) ( xvii ) godrej versatila v2 table for faculty sitting area size:150cm ( w ) x 89.4cm ( d ) x 75cm ( h ) ( xviii ) godrej aristo executive table with right unit and pedestal size:180cm ( w ) x 210cm ( d ) x 75cm ( h ) ( xix ) godrej impress main desk table size: 180cm ( w ) x 90cm ( d ) x 75cm ( h ) ( xx ) godrej impress back unit for impress desk table size: 221.5cm ( w ) x 41cm ( d ) x 200cm ( h ) ( xxi ) godrej display unit tv cabinet walnut color size: 140cm ( w ) x 40cm ( d ) x 75.4cm ( h ) ( xxii ) godrej time out 4 seater pu coated dining table size: 113.5cm ( w ) x 117.5cm ( d ) x 75cm ( h ) ( xxiii ) godrej unwind café chair without armrest size: 52.5cm ( w ) x 55.8cm ( d ) x 84.5cm ( h ) x 45cm ( seat height ) ( xxiv ) godrej neo apple dining table 6 seater glass top size: 160cm ( w ) x 90cm ( d ) x 75cm ( h ) ( xxv ) godrej novice silver dining chair size: 44.5cm ( w ) x 41.5cm ( d ) x 96cm ( h ) ( xxvi ) godrej grande dark walnut dining chair size: 45cm ( w ) x 45cm ( d ) x 95cm ( h ) ( xxvii ) godrej alice coffee table walnut color size: 100cm ( w ) x 65cm ( d ) x 45cm ( h ) ( xxviii ) godrej pisa 3 seater leatherite sofa size: 205.5cm ( w ) x 92cm ( d ) x 82cm ( h ) ( xxix ) godrej pisa 2 seater leatherite sofa size: 100cm ( w ) x 92cm ( d ) x 82cm ( h ) ( xxx ) godrej pisa single seater leatherite sofa size: 86cm ( w ) x 92cm ( d ) x 82cm ( h ) ( xxxi ) godrej storwel plain almirah size: 91.6cm ( w ) x 48.6cm ( d ) x 198cm ( h ) ( xxxii ) godrej glass door storwel almirah size: 91.6cm ( w ) x 48.6cm ( d ) x 198cm ( h ) ( xxxiii ) godrej single sided wood & steel book rack base unit size:90cm ( w ) x 30cm ( d ) x 189cm ( h ) ( xxxiv ) godrej all steel periodical display rack size:90cm ( w ) x 45cm ( d ) x 183cm ( h ) ( xxxv ) godrej 4 door bookcase ( without top ) size:91.4cmw x 32cm ( d ) x 174.2cm ( h ) ( xxxvi ) white board 4ft. x 3ft. with stand ( xxxvii ) l shaped workstation made of 19mm thk white mdf board with pvc edges. ( xxxvii ) size:1800mm ( l ) + 1200mm ( l ) x 600mm ( d ) x 1200mm ( h ) ( c ) led tv ( i ) supply, installation, testing and commissioning of 75 ultra hd led television with all accessories. ( ii ) make : sony / samsung / lg ( iii ) supply, installation, testing and commissioning of 32 hd led television with all accessories. ( iv ) make : sony / samsung / lg ( d ) projector & screen set complete ( i ) supply, installation, testing and commissioning of full hd projector with all accessories like bracket, ceiling mount kit powder coated for projector, 4x6, 16:9 aspect ratio, motorised projection screen etc.make : epson / canon / panasonic ( e ) split type air conditioners set complete ( i ) supply, installation, testing and commissioning of 1.5tr split ac inverter type 3 star rating with ms frame, copper pipe, drain pipe etc.. complete with all accessories like 5kva stabiliser, wiring etc.make: voltas / daikin / mitsubishi / hitachi / lg / samsung ( ii ) supply, installation, testing and commissioning of 2tr split ac inverter type 3 star rating with ms frame, copper pipe, drain pipe etc.. complete with all accessories like 5kva stabiliser, wiring etc.make: voltas / daikin / mitsubishi / hitachi / lg / samsung ( f ) water purifier cum cooler set complete ( i ) supplying, installing, testing & commissioning of water purifier cum cooler of following specifications: make : bluestar / eurak forbes / voltas / zero b / kentstorage tank : 150 litersno.of faucets 2nett weight in kg ( approx ) 95 kgdimensions : 812mm ( w ) x 612mm ( d ) x 1210mm ( h ) refrigerant : r 22current in amps : 8.0type of compressor : rotarycooling capacity 150litres per hourwater tank sheet material and thickness stainless steel ( grade aisi 304 ) with puf insulation, thickness > =0.6 mmwater tank cover and lid bottom sheet material high impact polystrene ( hip ) water tank cover and lid bottom sheet thickness 1.5 millimetercooler cabinet sheet material stainless steel ( grade aisi 304 ) cooler cabinet sheet thickness 0.8 millimeter ( g ) sound system set complete ( i ) supply, installation, testing & commissioning of sound system ( make: ahuja / bose ) set consisting of following items: i ) amplifier with 5 independent channels and can provide automatic re settable overcurrent, overload, overheating, overvoltage, under voltage and dc protection 4 nos.ii ) 6w ceiling speaker with max spl1m / 1w 96db . frequency response of 80hz 20khz with a dispersion angle of 160 deg 16 nos.iii ) 30w wall mount with max spl1m / 1w 96db . frequency response of 160hz 20khz 12 nos.iv ) 2 x 1.5 sq mm armoured frls cable 1000 mtsv ) wireless microphone system 2 nos.vi ) tabletop wireless microphone 64 nos. meter box ( i ) poly carbonate weather proof outdoor type meter cover boxes for single phase meter size 315mm x 265mm x 130mm along with zinc plated clamps ( ii ) poly carbonate weather proof outdoor type meter cover boxes for three phase meters 445mm x 345mm x 170mm along with zinc plated clamps ( iii ) deep drawn m.s. sheet weather proof outdoor type meter cover box for single phase meter size 300mm x 250mm x 160mm along with zinc plated clamps ( iv ) deep drawn m.s. sheet weather proof outdoor type meter cover box for three phase meter size 500mm x 300mm x 160mm along with zinc plated clamps ( v ) metal box of ct 800 / 5 amp ( vi ) meter box made of m / s sheet etc. crca metal sheet each fitted with 4no. racing cost ct ratio 400 / 5a ( vii ) meter box ( viii ) meter box made of m / s sheet etc. crca metal sheet each fitted with 4no. racing cost ct ratio 800 / 5a ( ix ) metal box of ct 400 / 5 amp gas insulated switchgear s / s ( i ) 30kv, 10ka, metal oxide, station class, surge arrester ( scada compliant ) ( for 33kv incoming line, ht side of 2nos. power transformers and 33 / 0.433kv station transformer ) outdoor type with surge counter. ( ii ) 33kv indoor gas insulated switchgear panel ( scada compliants ) with: breaker: 36kv, 1250 a, ( 25ka s.c. rating ) , 3 ph, indoor type breaker ( with 30v dc tripping / closing coil and associated control ) along with marshalling box, terminal connectors and required accessories complete as per applicable ts ct:36kv, 1 ph, 25ka ( 800^00 200 / 1 1 1 a ) indoor type current transformer, having three secondary cores ( protection & metering & current differential protection ) along with terminal connectors, junction box and required accessories etc. complete as per applicable ts ( 1 set = 3 nos. ) pts: 36kv, 1 ph, 33kv / 110 v, single core outdoor type potential transformer along with terminal connectors, junction box and required accessories etc. complete as per applicable ts ( 1 set= 3 nos. ) and digital ammeter / voltmeter / energy meter, o / c and e / f relay etc. the cable chamber shall have 3 nos., 20kv, 10 ka distribution class valve type lightning arresters and isolators of capacity given in ts. for feeder protection 1 2 ( iii ) 33kv indoor gas insulated switchgear panel ( scada compliants ) consisting of 36 kv breaker 630a, 25 ka for 3 sec, phase single busbar 1250a ( copper ) , 36 kv single phase, ( 800 400 200 / 1 1 a ) 3 nos of indoor type cts, 33 kv / 110volts potential transformers, indoor mounting type control panel, control cabelling between gis and indoor control panel required accessories, bi metalic clamps, ammeter , voltmeter, modem compatible dlms compliant class 1 meter static vector energy meter, relays and accessories complete for bus coupler protection. ( iv ) 33kv indoor gas insulated switchgear panel ( scada compliants ) consisting of 36 kv breaker 630a, 25 ka for 3 sec, phase single busbar 1250a ( copper ) , 36 kv single phase, ( 800 400 200 / 1 1 1a ) 3 nos of indoor type cts, 33 kv / 110volts potential transformers, indoor mounting type control panel, control cabelling between breakers and indoor control and required accessories, bi metalic clamps, ammeter , voltmeter, modem compatible dlms compliant class 1 meter tri vector energy meter, relays and accessories complete for power transformer protection. ( v ) 33kv indoor gas insulated switchgear panel ( scada compliants ) consisting of 36 kv breaker 630a, 25 ka for 3 sec, phase single busbar 1250a ( copper ) , 36 kv single phase, ( 800 400 200 / 1 1 1a ) 3 nos of indoor type cts, 33 kv / 110volts potential transformers, indoor mounting type control panel, control cabelling between breakers and indoor control and required accessories, bi metalic clamps, ammeter , voltmeter, modem compatible dlms compliant class 1 meter tri vector energy meter, relays and accessories complete for station transformer protection. ( vi ) 11 kv indoor gas insulated switch gear panel ( scada compliants ) consisting of 1250 a, 25ka for 3 seconds, 3 ph, indoor type breaker along with 12 kv, 1 phase, 600 300 / 1 1 1 1 amp 3 nos indoor type current transformer, 11 kv / volts potential transformers, indoor mounting type control panel for transformer breaker, control cabling between breaker and indoor control panel and required accessories, bi metallic clamps, a meter, volt meter, modem compatible dlms complaint class a static tri vector energy meter, relay & accessories complete for transformer protection ( vii ) 12 kv, 1250 a, 25ka for 3 seconds, 3 ph, indoor gas insulated switch gear panel ( scada compliants ) along with 1 phase, 600 300 / 1 1 1 1 amp 3 nos indoor type current transformer, 11 kv / 110 volts potential transformers, indoor mounting type control panel for transformer breaker, control cabling between breaker and indoor control panel and required accessories, bi metallic clamps, a meter, volt meter, modem compatible dlms complaint class a static tri vector energy meter, relay & accessories complete for bus coupler protection ( viii ) 12 kv, 1250 a, 25ka for 3 seconds, 3 ph, indoor gas insulated switch gear panel ( scada compliants ) along with kv, 1 phase, 600 300 / 1 1 1 1 amp 3 nos indoor type current transformer, 11 kv / 110 volts potential transformers, mounting type control panel for transformer breaker, control cabling between breaker and indoor control panel and required accessories, bi metallic clamps, a meter, volt meter, modem compatible dlms complaint class a static tri vector energy meter, relay & accessories complete for feeder protection ( ix ) remote terminal unit ( rtu ) & accessories with pc & connections with 30 nos. analog points for voltage, frequency, mw, mvar ; 3 positional analog points for oltc and 28 digital points for breaker and isolator status. ( x ) flexible cu. earth bond 1cm dia & 500mm long, both end provision of socket suitable for m 16 bolts. ( xi ) g 3 gi beam ( 5.05mtr long, consisting of 2 nos 150x75 x5.7mm ) for 33kv incoming line ( 2 nos. beam one for arrester and other for isolator, nominal unit wt 0.2 mt ) ( xii ) gi spikes with cone and gi ( 2 nos ) base plate 10mm ( 50x2500 mm gi pipe ) ( unit wt=0.04 mt ) ( xiii ) 12 kv, 630 a, 25ka for 3 seconds, 3 ph double break centre rotating type ( dbcr ) , gang operated isolator along earth switch and support insulators, operating mechanism, base channel, down pipe and all required accessories complete as per technical specifications, without earth switch for substation transformers. ( xiv ) 60 kg / mtr rail pole pieces 5.4 mts ( 2.7x2 ) 44.62 kg per mtr / transformer ( unit wt=0.240 mt ) ( xv ) 2 tier 2 rows cable trench ( internal width 1500 mm, depth 680 mm, width 75x75x6 mm support angles fixed rcc column of 250 x 250 mm & with ladder type cable tray ( 45x45x5mm two angles at both side having welded flats of mm at a gap of 150mm ) for power & control cable ( xvi ) chequerred plate 1000x300x5.6mm thick for cable trench in side control room 12 mtr ( xvii ) overhead hoist beam mounted remote opertated for lifting of equipment of control room, capacity 5 tonnes ( xviii ) 36kv, 800 a, 25ka for 3 seconds, 3 ph double break centre rotating type ( dbcr ) , motorised indoor floor mounted off load isolator along with all required accessories complete as per technical specifications, scope of works and approved ( xix ) external electrification in switch yard area including power receptacles, station yard lighting with 6 nos lighting ( fitted with 2x100 watts led flood light ) made of 11 meters high steel tubular poles ( is 2713 part i, ii iii ) of designation 410 – sp 60 and 6 nos light ( 1 x 250 w led ) on structure & control room complete as per technical specifications, approved drawings and scope of the work. ( xx ) internal electrification works of control room comprising of main distribution board, sub distribution boards, flexible multi conductor 2.5 sqmm wiring ( for light & fan ) / 4 sqmm wiring ( for power points ) , power and light points, conduits, fan / led lamps / tube fittings, exhaust fans, switches, sockets, 2mm thick, pvc 25mm dia conduits pipes in plugs, miniature circuit breakers, seperate independent earthing ( 2 nos of 40mm gi pipe / 3 m long ) etc as required including dc emergency lighting and auto change over switch as per technical specifcations, approved drawings and of work. m1671 ( ) over head distance to fault locator ( offline ) with signature analyser. a ) accessories & laptop as per latest technical specifications m1672 ( ) tower line for river crossings ( i ) d type tower for 33kv, 11kv ( double circuit line ) ( 13.56mt each ) with all related nuts and bolts including foundation nuts and bolts ( g i type ) ( ii ) d type tower for 33kv, 11kv ( four circuit line ) ( 15.14mt ) ( double circuit tower +3meter extension each ) with all related nuts and bolts including foundation nuts and bolts ( g i type ) ( iii ) compression type tension hardware fitting for earth wire ( iv ) vibration damper suitable for 7 / 3.15 mm gi earth wire ( v ) 25x500 mm flexible cu. earth bond. m1673 covered conductor & accessories ( i ) acsr covered panther conductor ( 200 sq. mm ) ( ii ) acsr covered wolf conductor ( 150 sq. mm ) ( iii ) acsr covered dog conductor ( 100 sq. mm ) ( iv ) mid span joint ( 150 sq mm & 200 sq mm ) ( v ) suspension ties ( ( 150 sq mm & 200 sq mm ) ) ( vi ) tension clamp ( wedge type ) ( ( 150 sq mm & 200 sq mm ) ) ( vii ) insulation piercing connector ( bare to covered ) ( ( 150 sq mm & 200 sq mm ) ) ( viii ) insulation piercing connector ( covered to covered ) ( ( 150 sq mm & 200 sq mm ) ) ( ix ) insulation piercing connector with alumunium bail for earthing ( ( 150 sq mm & 200 sq mm ) ) ( x ) mid span joint ( 100 sq mm & 50 sq mm ) ( xi ) suspension ties ( ( 100 sq mm & 50 sq mm ) ) ( xii ) tension clamp ( wedge type ) ( ( 100 sq mm & 50 sq mm ) ( xiii ) insulation piercing connector ( bare to covered ) ( 100 sq mm & 50 sq mm ) ( xiv ) insulation piercing connector ( covered to covered ) ( 100 sq mm & 50 sq mm ) ( xv ) insulation piercing connector with aluminium bail for earthing ( 100 sq mm & 50 sq mm ) m1674 led lights and related items ( i ) led light 190w ( ii ) led light 120w ( iii ) led light 75w ( iv ) led light 40w ( v ) 18 watt led panel bulb with outer 205x205x25 mm sq. and 180x180 mm inner m1675 diesel generator sets ( three phase ) with amf panel ( i ) 10kva ( ii ) 20kva ( iii ) 30kva ( iv ) 40kva ( v ) 50kva ( vi ) 62.5kva ( vii ) 82.5kva ( viii ) 100kva ( ix ) 160kva m1676 trw related items ( i ) 1 / 2 l.t. brass studs ( ii ) 1 / 2 h.t. brass studs ( iii ) l.t bushing 3347 250 amp ( iv ) l.t. bushing 250 amp ( v ) kraft paper 4 mile ( vi ) insulating paper tap 2.0 mm ( vii ) press board 1 mm ( viii ) bakelite tube 3 / 8x1 / 2 ( ix ) empire sleeving size 4 mm ( x ) r.c. sheet 3 x2x1 / 2 mm ( xi ) inline connector 6 mm ( xii ) cotton tap 1 ( xiii ) r.c. strip ( xiv ) r.c. washer 50x28x2 ( xv ) silicagel breather 200 kva ( xvi ) m.seal ( xvii ) c.i.cap 1 8 1 / 2 ( xviii ) insulating paper top 2.5 mil 20 mm ( xix ) crap paper ( xx ) g.p. thinner ( xxi ) d.a. gray paint ( xxii ) white paint ( xxiii ) nylon washer 3 / 4 ( xxiv ) m.s. plug ( xxv ) l.t. al.strip 6.50x4.50 mm m1677 transformer repairing items ( i ) l.t bushing rod assembly of 750 kva transformer. ( ii ) h.t bushing rod assembly of 750 kva transformer. ( iii ) l.t bushing insulator of 750 kva transformer. ( iv ) h.t bushing insulator of 750 kva transformer. ( v ) l.t bushing gasket set of 750 kva transformer. ( vi ) h.t bushing gasket set of 750 kva transformer. ( vii ) tank gasket set of 750 kva transformer. ( viii ) silica gel breather of 750 kva transformer. ( ix ) arching horn of 750 kva transformer, ( x ) l.t bushing rod assembly of 500 kva transformer ( xi ) h.t bushing rod assembly of 500 kva transformer ( xii ) l.t bushing insulator of 500 kva transformer ( xiii ) h.t bushing insulator of 500 kva transformer ( xiv ) l.t bushing gasket set of 500 kva transformer ( xv ) h.t bushing gasket set of 500 kva transformer ( xvi ) tank gasket set of 500 kva transformer ( xvii ) silica gel breather of 500 kva transformer ( xviii ) arching horn of 500 kva transformer ( xix ) l.t bushing rod assembly of 400 kva transformer ( xx ) h.t bushing rod assembly of 400 kva transformer ( xxi ) l.t bushing insulator of 400 kva transformer ( xxii ) h.t bushing insulator of 400 kva transformer ( xxiii ) l.t bushing gasket set of 400 kva transformer ( xxiv ) h.t bushing gasket set of 400 kva transformer ( xxv ) tank gasket set of 400 kva transformer ( xxvi ) silica gel breather of 400 kva transformer ( xxvii ) arching horn of 400 kva transformer ( xxviii ) l.t bushing rod assembly of 315 kva transformer ( xxix ) h.t bushing rod assembly of 315 kva transformer ( xxx ) l.t bushing insulator of 315 kva transformer ( xxxi ) h.t bushing insulator of 315 kva transformer ( xxxii ) l.t bushing gasket set of 315 kva transformer ( xxxiii ) h.t bushing gasket set of 315 kva transformer ( xxxiv ) tank gasket set of 315 kva transformer ( xxxv ) silica gel breather of 315 kva transformer ( xxxvi ) arching horn of 315 kva transformer ( xxxvii ) l.t bushing rod assembly of 250 kva transformer ( xxxviii ) h.t bushing rod assembly of 250 kva transformer ( xxxix ) l.t bushing insulator of 250 kva transformer ( xl ) h.t bushing insulator of 250 kva transformer ( xli ) l.t bushing gasket set of 250 kva transformer ( xlii ) h.t bushing gasket set of 250 kva transformer ( xliii ) tank gasket set of 250 kva transformer ( xliv ) silica gel breather of 250 kva transformer ( xlv ) arching horn of 250 kva transformer ( xlvi ) l.t bushing rod assembly of 200 kva transformer ( xlvii ) h.t bushing rod assembly of 200 kva transformer ( xlviii ) l.t bushing insulator of 200 kva transformer ( xlix ) h.t bushing insulator of 200 kva transformer ( l ) l.t bushing gasket set of 200 kva transformer ( li ) h.t bushing gasket set of 200 kva transformer ( lii ) tank gasket set of 200 kva transformer ( liii ) silica gel breather of 200 kva transformer ( liv ) arching horn of 200 kva transformer ( lv ) l.t bushing rod assembly of 100 kva transformer ( lvi ) h.t bushing rod assembly of 100 kva transformer ( lvii ) l.t bushing insulator of 100 kva transformer ( lviii ) h.t bushing insulator of 100 kva transformer ( lix ) l.t bushing gasket set of 100 kva transformer ( lx ) h.t bushing gasket set of 100 kva transformer ( lxi ) tank gasket set of 100 kva transformer ( lxii ) silica gel breather of 100 kva transformer ( lxiii ) arching horn of 100 kva transformer ( lxiv ) l.t bushing rod assembly of 63 kva transformer ( lxv ) h.t bushing rod assembly of 63 kva transformer ( lxvi ) l.t bushing insulator of 63 kva transformer ( lxvii ) h.t bushing insulator of 63 kva transformer ( lxviii ) l.t bushing gasket set of 63 kva transformer ( lxix ) h.t bushing gasket set of 63 kva transformer ( lxx ) tank gasket set of 63 kva transformer ( lxxi ) silica gel breather of 63 kva transformer ( lxxii ) arching horn of 63 kva transformer ( lxxiii ) l.t bushing rod assembly of 25 kva transformer ( lxxiv ) h.t bushing rod assembly of 25 kva transformer ( lxxv ) l.t bushing insulator of 25 kva transformer ( lxxvi ) h.t bushing insulator of 25 kva transformer ( lxxvii ) l.t bushing gasket set of 25 kva transformer ( lxxviii ) h.t bushing gasket set of 25 kva transformer ( lxxix ) tank gasket set of 25 kva transformer ( lxxx ) silica gel breather of 25 kva transformer ( lxxxi ) arching horn of 25 kva transformer ab switch repairing item ( i ) jaw of air break switch 600a ( ii ) blade of of air break switch 600a ( iii ) post insulator of air break switch 600a ( iv ) bearing of air break switch 600a ( v ) phase coupling pipe of air break switch 600 a ( vi ) down pipe of air break switch 600 a ( vii ) operating handle of air break switch 600 a ( viii ) operating leaver of air break switch 600 a ( ix ) connector of air break switch 600 a ( x ) arching horn of air break switch 600 a ( xi ) jaw of air break switch 400a ( xii ) blade of of air break switch 400a ( xiii ) post insulator of air break switch 400a ( xiv ) bearing of air break switch 400a ( xv ) phase coupling pipe of air break switch 400 a ( xvi ) down pipe of air break switch 400 a ( xvii ) operating handle of air break switch 400 a ( xviii ) operating leaver of air break switch 400 a ( xix ) connector of air break switch 400 a ( xx ) arching horn of air break switch 400 a ( xxi ) jaw of air break switch 200a ( xxii ) blade of of air break switch 200a ( xxiii ) post insulator of air break switch 200a ( xxiv ) bearing of air break switch 200a ( xxv ) phase coupling pipe of air break switch 200 a ( xxvi ) down pipe of air break switch 200 a ( xxvii ) operating handle of air break switch 200 a ( xxviii ) operating leaver of air break switch 200 a ( xxix ) connector of air break switch 200 a ( xxx ) arching horn of air break switch 200 a vcb repairing item ( i ) trip coil of 33kv vcb ( ii ) trip coil of 11kv vcb ( iii ) closing coil of 33kv vcb ( iv ) closing coil of 11kv vcb ( v ) push button switch 5a ( vi ) test terminal block 5a ( vii ) 33 kv indoor current transformers of ratio as required suitable for metering and protection. ( viii ) 33 kv outdoor current transformers of ratio as required suitable for metering and protection. ( ix ) 11 kv indoor current transformers of ratio as required suitable for metering and protection. ( x ) 11 kv outdoor current transformers of ratio as required suitable for metering and protection. ( xi ) 33000 / 110 volts single phase voltage transformer indoor. ( xii ) 33000 / 110 volts single phase voltage transformer outdoor. ( xiii ) 11000 / 110 volts single phase voltage transformer indoor. ( xiv ) 11000 / 110 volts single phase voltage transformer outdoor. ( xv ) flush type switchboard mounting pattern 96x96 sq.mm m.i. voltmeter ( xvi ) voltmeter phase selector switch. ( xvii ) indicating lamps coloured red, amber and blue, white, green, etc. ( xviii ) auxiliary switch having minimum of 8 contacts, 4 normally open and 4 normally closed ( xix ) flush mounting pattern 96x96 sq.mm m.i. ammeter ( xx ) ammeter selector switch to indicate phase current ( xxi ) over current and earth fault numerical relay ( xxii ) automatic door illuminating lamps with switch ( xxiii ) 240 v, 100 w, ac single phase anti / condensation heaters, with thermostat ( 0 60 deg. c ) and switch. ( xxiv ) operation counter for vcb ( xxv ) bus bar spout epoxy casted r phase of 33kv indoor vcb ( xxvi ) bus bar spout epoxy casted y phase of 33kv indoor vcb ( xxvii ) bus bar spout epoxy casted b phase of 33kv indoor vcb ( xxviii ) circuit spout epoxy casted of 33kv indoor vcb ( xxix ) housing for vacuum interrupter of 33kv indoor vcb ( xxx ) drive insulator 33kv vcb ( xxxi ) release coil of 33kv indoor vcb ( xxxii ) bus bar spout epoxy casted r phase of 11kv indoor vcb ( xxxiii ) bus bar spout epoxy casted y phase of 11kv indoor vcb ( xxxiv ) bus bar spout epoxy casted b phase of 11kv indoor vcb ( xxxv ) circuit spout epoxy casted of 11kv indoor vcb ( xxxvi ) housing for vacuum interrupter of 11kv indoor vcb ( xxxvii ) drive insulator of 11kv vcb ( xxxviii ) release coil of 11kv indoor vcb ( xxxix ) vacuum interrupter of 33kv outdoor type ( xl ) vacuum interrupter of 33kv indoor type ( xli ) vacuum interrupter of 11kv outdoor type ( xlii ) vacuum interrupter of 11kv indoor type ( xliii ) buzzer / hooter ( xliv ) t n c switch m1680 mrt related items ( i ) fully automatic energy meter test bench with 0.02 class, 10 position, for testing of 1 ph & 3 ph energy meters ( ii ) 3 ph energy meter test kit field testing of 3 ph energy meters comprising of portable reference meter and portable power source ( iii ) 1 ph energy meter test kit for field testing of 1 ph energy meter ( iv ) instrument transformer ( ct pt ) test system ( v ) dc winding resistance measurement test kit rating 25 a ( vi ) acdc hipot test kit 5kv ( vii ) transformer turn ratio meter and measurement test kit ( viii ) oil breakdown value ( bdv ) test kit 80kv ( ix ) transformer oil filtering machine 600 lph ( x ) earth tester with all necessary accessories ( xi ) circuit breaker operational analyzer ( xii ) 3 ph relay test kit with all necessary accessories ( xiii ) digital micro ohm meter measurement test kit ( xiv ) primary injection kit 1000 a with relay testing facility ( xv ) ct polarity tester ( xvi ) tong tester: 2000 a ac / dc ( xvii ) electro mechanical tool kit ( xviii ) hv gloves ( xix ) capacitance tan delta test set for transformer, motor and switchgear ( xx ) capacitance tan delta test set for cables ( xxi ) vaccum interrupter tester ( xxii ) secondary injection kit ( xxiii ) digital ht earth tester ( xxiv ) 3 ph power quality analyser ( xxv ) 05 kv insulation tester ( manual ) ( xxvi ) 10 kv insulation tester ( motarized ) ( xxvii ) digital clamp meter; 20 1000a, 200 v dc ( xxviii ) digital clamp meter; 20a ( 1ma 20a ) ( xxix ) discharge rod ( xxx ) thermal imaging camera m1681 frp fencing ( i ) fiber reinforced plastic ( frp ) fencing for 11 / 0.433kv, 63kva substation ( ii ) fiber reinforced plastic ( frp ) fencing for 11 / 0.433kv, 100 kva substation ( iii ) fiber reinforced plastic ( frp ) fencing for 11 / 0.433kv, 200 kva substation ( iv ) fiber reinforced plastic ( frp ) fencing for 11 / 0.433kv, 315 kva substation ( v ) fiber reinforced plastic ( frp ) fencing for 11 / 0.433kv, 400kva substation ( vi ) fiber reinforced plastic ( frp ) fencing for 11 / 0.433kv, 500 kva substation ( vii ) fiber reinforced plastic ( frp ) fencing for 11 / 0.433kv, 630 kva substation ( viii ) fiber reinforced plastic ( frp ) fencing for 11 / 0.433kv, 750 kva substation...

Building Construction Department - Jharkhand

26195328 notice inviting e quotation for supply of material for godda division 1 m 014 79 brick 75a 2 m 051 82 cold twisted bars (hysd bars) as per is:1786 2008 average rate 3 m 054 87 corrosion resistant structural steel 4 m 064 131 paint 5 m 078 198 cement primer 6 m 154 146 primer 7 m 178 179 structural steel average rate 8 m 182 184 tiles size 300 x 300 mm and 25 mm thick 9 m 183 185 timber 10 m 185 190 water based cement paint 11 m 188 193 wooden ballies 2 dia for bracing 12 m 189 194 wooden ballies 8 dia and 9 m long (9 m @ rs. 43.00/m) 13 m 190 195 wooden packing 14 m 191 196 wooden staff for fastening of flag 25 mm dia, 1.0 m long 15 m 196 271 (a) 75b brick (b) fly ash lime bricks (falg) brick conforming to is 12894 1990 (9 x 4.5 x 3) 100 a at source (c) brick tiles (300mm x 150 mmx 50 mm) (d) picket jhama brick (e)jhama khoa/metal (f)bangla bhattas brick of size 9 3/4 x 4 3/4 x 2 3/4 (248 mm x121 mm x 70 mm)inclusive of royalty but exclusive of gst . (1) 75 b (2) jhama bricks note : in areas where bricks manufacture are of less size, the rate may be derived by reducing the rate in item [271(d) & (f)] in proportion of the bricks rounding to nearest rs. 5.00 16 m 198 273 bricks bats at kiln site 17 m 199 274 rough dressed stone boulder for masonry works. 18 m 200 282 seasonel sal wood scantling 19 m 201 283 sal planks : (i) 25 mm to 40 mm (ii) 12 mm to 20 mm 20 m 202 284 teak wood : (i) scantling (ii) planks 25 mm to 40 mm (iii) planks 12 mm to 20 mm 21 m 203 285 sisum wood (i) scantling (ii) planks 25 mm to 40 mm (iii) planks 12 mm to 20 mm 22 m 204 286 seasoned gamhar wood scantling (local) 23 m 205 287 local wood (i) scantling (ii) planks 25 mm to 40 mm (iii) planks 12 mm to 20 mm 24 m 206 288 bamboo (i) 75 mm dia 6 m long to 8 m long (ii) 100 mm dia 6 m long to 8 m long (iii) 50 mm dia hill bamboo 25 m 207 289 sal ballah post (i) 100 mm dia (ii) 125 mm dia (iii) 150 mm dia 26 m 208 290 butt hinges as per clause 562 of building specification of building construction deptt. of size. 26.01 (i) 75 mm 26.02 (ii) 100 mm 27 m 209 291 (i) teak ply 4 mm thick (ii) teak ply 6 mm thick 28 m 210 292 ply wood (national or equivalant make) (i) 25 mm thick (ii) 19 mm thick (iii) 12 mm thick (iv) 6 mm thick 29 m 211 293 orinary commercial ply (i) 3 mm thick (ii) 4 mm thick (iii) 6 mm thick 30 m 212 294 (i)sun mica best quality (ii) formica (1 mm) 31 m 215 297 barbed wire of 4 point, 2 ply 12 swg, 150 mm apart 32 m 217 299 welded mesh (8 to 10 swg) 100 to 125 mm square size 33 m 218 300 c.a. sheet (i) corrugated 6 mm thick 1.5 m to 3.05 m long. (ii) (a) plain 6 mm thick 2.4 m to 3.05 m long (b) plain 4 mm do (iii) c.a. ridge, valley 1 m long (plain wing adjustable) (iv) corrugated adjustable ridge 34 m 219 301 l drop 16 mm dia 300 mm long (as per 5.6.5 of building specification of bcd) with screw and all fittings. (i) aluminum (ii) iron (copper oxidized) 35 m 220 302 d handle iron, proper oxidized as per clause 5.6.7 of building specification of b.c.d. (i) 150 mm long (ii) 125 mm long (iii) 100 mm long 36 m 221 303 d handle made of 16 mm wide and 6 mm thick aluminum flat. (i) 150 mm long and 10 mm dia (ii) 100 mm long and 10 mm dia 37 m 222 304 aluminum pipe of 18 gauge (i) 12 mm dia (ii) 16 mm dia (iii) 20 mm dia 38 m 223 305 iron nails (i) 125 mm and below (ii) above 125 mm (iii) glass clip of wire 39 m 224 306 mild steel copper oxidized tower bolt as per clause 5.6.6 of building specification of b.c.d 10 mm dia, complete set. (i) 100 mm long (ii) 150 mm long (iii) 200 mm long (iv) 225 mm long (v) 300 mm long (vi) 450 mm long (vii) 600 mm long 40 m 225 307 aluminum tower bolt as per clause 5.6.6 of buillding specification of b.c.d. top quality, 10 mm dia (i) 100 mm long (ii) 120 mm long (iii) 150 mm long (iv) 200 mm long (v) 225 mm long (vi) 300 mm long 41 m 226 308 screw (n.f) (i) 75 mm size (ii) 60 mm size (iii) 50 mm size (iv) 40 mm size to 30 mm size (v) below 30 mm to 12 mm size 42 m 227 310 varnish standard make 43 m 228 311 sprit 44 m 229 312 (i) primer for wood work (ii) primer for steel work 45 m 230 313 shaliltex board (for use as per expansion joint i.s. 1838 1938 filter) (i) 25 mm thick (ii) 18 mm thick (iii) 12 mm thick 46 m 231 314 shalitex primer 47 m 232 315 double boiled llinseed oil 48 m 233 316 (a) aluminum paint standard make (b) synthetic enamel (isi mark) 49 m 235 318 plastic emulsion paint 50 m 236 319 dry distemper 51 m 237 320 oil bound distemper 52 m 238 321 snowcem powder 53 m 239 322 (i) cicko powder / inpermo waterproofing comp) (ii) cicko liquid 54 m 240 323 robin blue 55 m 241 324 color for wash 56 m 242 325 whitening 57 m 243 326 putty 58 m 244 327 blackening powder 59 m 245 328 (i) 1st quality paint of different shades (ii) 2nd quality paint 60 m 246 329 wax polish ( 1 lit = 0.50 kg) 61 m 247 330 french polish standard make 62 m 249 332 cotton 63 m 250 333 ram raj 64 m 251 334 shellex 65 m 252 335 narial coir string 66 m 253 336 narial rope 20 mm to 25 mm dia. 67 m 254 337 sutli 68 m 255 338 sabey string 69 m 256 339 cotton string 70 m 257 340 raniganj tiles 71 m 258 341 ridge for above 72 m 259 342 naria tiles 225 mm to 250 mm 73 m 260 343 ridge for above or mungra 74 m 261 344 narial rope above 25 mm dia 75 m 262 345 thatching grass in bundle (consisting of small & average length of grass 2.75 m) bundle 76 m 263 346 oxalic acid (1 lit. = 1 kg) 77 m 264 347 iron clamp (460 mm x 40 mm x 6 mm) 78 m 265 348 rolling shutter 1.02 mm thick 79 m 266 349 shalimar tarphelt bh (type ii group 1) 80 m 267 350 (a) sun glass (modi) (b) plane glass panes (i) 2 mm thick (ii) 3 mm thick (iii) 4 mm thick (iv) 6 mm thick (c) pin hammered glass (i) 3 mm thick (ii) 4 mm thick (iii) 5 mm thick (d) 20 mm wide 4 mm thick glass strip for flooring 81 m 268 351 hessian cloth (0.3 kg/ m2 cot.) 82 m 269 352 gunny best quality 83 m 270 353 limpet washer 84 m 271 354 bitumen washer 85 m 272 355 plaster of peris 86 m 273 356 g.i. hook 150 mm to 10 mm dia 87 m 274 357 (i) 25 mm x 6 mm nuts & bolts (ii) 16 mm x 3.75 mm nuts & bolts (iii) 10 mm x 3.75 mm nuts & bolts 88 m 275 358 (i) fly proof wire netting (18 gauge wire with 12 16 nos,mesh per m2) (ii) fly proof wire netting (light gauge) 89 m 276 359 turpentine oil 90 m 277 360 manson polish 91 m 278 361 carborandum stones (4, 6, 8 & 10 nos) 92 m 279 363 lime rubbish 93 m 280 364 slack coal grade c (steam) long flame 94 m 281 365 flush door (hot pressed adhesive conforming to 2202 part 1) i.s. (i) 25 mm thick (a) both side commercial (b) one side teak (c) both side teak (ii) 32 mm thick (a) both side commercial (b) one side teak (c) both side teak (iii) 38 mm thick (a) both side commercial (b) one side teak (c) both side teak 95 m 282 366 (a) looking eye piece best quality 96 m 283 367 fevicol / ktcat / vamicol 97 m 284 368 boat spike (300 400 mm long) 98 m 285 369 kotah stone tiles (15 mm 23 mm) thick (i) 300 mm x 300 mm (ii) 375 mm x 375 mm (iii) 450 mm x 450 mm 99 m 286 370 white makrana marble stone 20 mm thick (i) 300 mm x 300 mm and below (ii) 300 mm x 600 mm and above 100 m 287 371 white glazed tiles 6 mm thick (150 x 150 mm size) 101 m 288 372 commercial grade colour ceramic wall/floor tiles ( as per is 13712) (i) 150 mm x 150 mm (ii) 300 mm x 300mm (iii) 300 mm x 450mm (iv) 300mm x 600mm 102 m 289 373 dholpur tiles 15 mm x 23 mm thick (i) 275 mm x 275 mm to 300 mm x 600 mm (ii) 300 mm x 900 mm (iii) 600 mm x 1200 mm 103 m 290 374 mosaic/tarrazo tiles 20 mm thick in ordinary cement base. 104 m 291 375 mosaic / tarrazo tiles 20 mm thick in white cement base. 105 m 292 376 slacked stone lime 106 m 293 377 unslacked stone lime 107 m 294 378 colour pigment for cement : (i) red (ii) black (iii) green (iv) blue 108 m 295 379 marble dust (daltonganj) 109 m 296 380 marble chips (i) dehradoon (ii) daltanganj 110 m 297 381 marble chips coloured daltonganj 111 m 298 382 commercial particle board interior (i) 12 mm (600 mm x 600 mm) size (ii) 25 mm (600 mm x 600 mm ) size 112 m 299 383 particle board exterior (600 mm x 600 mm size) (i) 12 mm (ii) 25 mm 113 m 302 386 (a) 100 mm dia c.a. pipe (b) 100 mm dia c. bend 114 m 384 252 paint (synthetic enamel) 115 m 1074 vitrified floor tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 15622 of approved make in all colours and shades.parking tiles (industrial tiles) 116 m 1075 vitrified tiles tread of stairs of size 1200x300x15mm thick with water absorption less then 0.08% and conforming to is 15622of approved make in all colours and shades.size of tile 1200x300 mm for tread of stairs. 117 m 1076 double charged vitrified floor tiles of size 600x600mm thick with water absorption less then 0.08% and conforming to is 15622 /iso 13006 of approved make in all colours and shades. 118 m 1077 vitrified cool roof tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 154557 2007/1501 3006 of approved make in all colours and shades. 119 m 1078 vitrified floor tiles of size 800x800mm with water absorption less then 0.08% and conforming to is 154557 2007/1501 3006 of approved make in all colours and shades. 120 m 1079 vitrified floor tiles of size 1000x1000mm with water absorption less then 0.08% and conforming to is 154557 2007/1501 3006 of approved make in all colours and shades. 121 m 1080 polysulphide(poring grade) ;density =1.65 gm/cc 122 m 1081 polymer modified cementation coating 123 m 1082 285 fibre glass cloth 124 m 1083 287 chequered tiles cement concrete base 300x300x25mm 125 m 1084 302 chequered tiles cement concrete base 300x300x40mm 126 m 1085 451 brass screws 30 mm 127 m 1086 458 plastic sleeves for screw 128 m 1087 586 chromium plated brass screws 40 mm 129 m 1088 587 chromium plated brass screws 30 mm 130 m 1089 588 chromium plated brass screws 25 mm 131 m 1090 589 chromium plated brass screws 20 mm 132 m 1091 595 bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm 133 m 1092 597 bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm 134 m 1093 608 nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide 135 m 1094 637 bright finished or black enameled mild steel screws 40 mm 136 m 1095 639 bright finished or black enameled mild steel screws 25 mm 137 m 1096 640 bright finished or black enameled mild steel screws 20 mm 138 m 1097 641 bright finished or black enameled mild steel bolts and nuts 50x6 mm 139 m 1098 642 oxidised mild steel butt hinges 125x65x2.12 mm 140 m 1099 643 oxidised mild steel butt hinges 100x58x1.90 mm 141 m 1100 644 oxidised mild steel butt hinges 75x47x1.70 mm 142 m 1101 645 oxidised mild steel butt hinges 50x37x1.50 mm 143 m 1102 646 oxidised mild steel parliamentary hinges 150x125x27x2.8 mm 144 m 1103 647 oxidised mild steel parliamentary hinges 125x125x27x2.8 mm 145 m 1104 648 oxidised mild steel parliamentary hinges 100x125x27x2.8 mm 146 m 1105 649 oxidised mild steel parliamentary hinges 75x100x20x2.24 mm 147 m 1106 660 oxidised mild steel sliding door bolt 300x16 mm 148 m 1107 661 oxidised mild steel sliding door bolt 250x16 mm 149 m 1108 664 oxidised mild steel tower bolt (barrel type) 250x10 mm 150 m 1109 665 oxidised mild steel tower bolt (barrel type) 200x10 mm 151 m 1110 666 oxidised mild steel tower bolt (barrel type) 150x10 mm 152 m 1111 667 oxidised mild steel tower bolt (barrel type) 100x10 mm 153 m 1112 668 oxidised mild steel handles 125 mm 154 m 1113 669 oxidised mild steel handles 100 mm 155 m 1114 670 oxidised mild steel handles 75 mm 156 m 1115 682 oxidised mild steel screws 50 mm 157 m 1116 683 oxidised mild steel screws 40 mm 158 m 1117 684 oxidised mild steel screws 30 mm 159 m 1118 685 oxidised mild steel screws 25 mm 160 m 1119 686 oxidised mild steel screws 20 mm 161 m 1120 689 anodised aluminium butt hinges 100x75x4 mm 162 m 1121 694 anodised aluminium butt hinges 75x45x3.2 mm 163 m 1122 696 anodised aluminium sliding door bolt 300x16 mm 164 m 1123 697 anodised aluminium sliding door bolt 250x16 mm 165 m 1124 698 anodised aluminium tower bolt (barrel type) 300x10 mm 166 m 1125 699 anodised aluminium tower bolt (barrel type) 250x10 mm 167 m 1126 700 anodised aluminium tower bolt (barrel type) 200x10 mm 168 m 1127 701 anodised aluminium tower bolt (barrel type) 150x10 mm 169 m 1128 702 anodised aluminium tower bolt (barrel type) 100x10 mm 170 m 1129 703 anodised aluminium handles 125 mm with plate 175 x 32 mm 171 m 1130 704 anodised aluminium handles 100 mm with plate 150 x 32 mm 172 m 1131 705 anodised aluminium handles 75mm with plate 125 x 32 mm 173 m 1132 706 anodised aluminium kicking plate 50 cm long 100x3.15 mm 174 m 1133 809 exterior primer 175 m 1134 829 black japan paint 176 m 1135 857 superior copal varnish 177 m 1136 859 oil type wood preservative 178 m 1137 863 putty for wood work 179 m 1138 870 plug 180 m 1139 874 black colour dark shade pigment 181 m 1140 875 red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment 182 m 1141 876 green or blue medium shade pigment 183 m 1142 976 ball bearing for rolling shutters 184 m 1143 992 galvanised steel plain sheets 185 m 1144 1002 mild steel round bar 12 mm dia and below 186 m 1145 1007 structural steel such as tees, angles channels and r.s. joists 187 m 1146 1008 flats up to 10 mm in thickness 188 m 1147 1009 flats exceeding 10 mm in thickness 189 m 1148 1010 mild steel rivets 190 m 1149 1022 galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots 191 m 1150 1034 bolts and nuts up to 300 mm in length 192 m 1151 1035 bolts and nuts above 300 mm in length 193 m 1152 1186 superior class teak wood such as dandeli, balarshah or malabar in planks 194 m 1153 1188 first class teak wood in planks 195 m 1154 1190 second class teak wood in planks 196 m 1155 1194 second class deodar wood in planks 197 m 1156 1199 sal wood in scantling 198 m 1157 1204 precast heat resistant terrace tiles (size 300x300 mm) and 20 mm thick 199 m 1158 1209 g.i. plain washer thick 200 m 1159 1213 water proofing materials 201 m 1160 1215 welding by electric plant 202 m 1161 1221 20 mm dia holding down bolts 203 m 1162 1223 steel weld mesh 204 m 1163 1239 18 mm thick flamed finish granite stone slab 205 m 1164 1240 18 mm thick italian marble stone slab, perlato (slab area up to 0.5 sqm). 206 m 1165 1241 commercial lpg in cylinder 207 m 1166 1304 surface box for stop cock 208 m 1167 1313 8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c. 209 m 1168 1396 vitreous china pedestal for wash basin 210 m 1169 1532 flush pipe with union spreaders and clamps all in c.p. brass for single stall 211 m 1170 1533 flush pipe with union spreaders and clamps all in c.p. brass for double stall 212 m 1171 1854 stoneware pipes grade a (60 cm long) 100 mm dia 213 m 1172 1875 white plastic seat (solid) with lid c.p. brass hinges and rubber buffers 214 m 1173 1876 black plastic seat (solid) with lid c.p. brass hinges and rubber buffers 215 m 1174 1891 c.i. trap for standard urinal with vent arm with operating and other couplings in c.p. brass: 50 mm dia 216 m 1175 2406 float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) 217 m 1176 2407 float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm) 218 m 1177 2408 float glass panes of nominal thickness 8 mm (weight not less than 20.00 kg/sqm) 219 m 1178 2459 anodised aluminium hanging type door stopper 220 m 1179 2464 anodised aluminium pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete 221 m 1180 2465 anodised aluminium casement stay 250 mm 222 m 1181 2491 pre laminated both side solid foam upvc profile (45x20mm) 223 m 1182 2492 solid foam upvc sheet 20mm thick pre laminated on both side 224 m 1183 2493 pvc edge beading 225 m 1184 2494 expandable fastner with plastic sleeve 226 m 1185 2604 weather/structural non sag elastomeric pu sealant (600ml sausage) for joints in rcc/ brick/ stone/ wood/ ceramic/ gypsum/ alluminium work complying to astm c920, din 18540 f & iso 11600 incl all taxes 227 m 1186 2605 structural sealant 6 mm x 12 mm 228 m 1187 2606 spacer tape 6.4 mm thick x 6 mm wide 229 m 1188 2607 weather sealant non staining (600 ml) 230 m 1189 2608 weather sealant normal (300 ml) 231 m 1190 2609 ms brackets/aluminium alloy brackets 232 m 1191 2610 silicon gasket in kg (above 50 g / m) 233 m 1192 2611 epdm gasket in kg (above 60 g / m) 234 m 1193 2612 anchor fastner m10 235 m 1194 2613 ss bolt with washer of different sizes for structural glazing / acp cladding 236 m 1195 2614 ss screws of sizes for structural glazing / acp cladding 237 m 1196 2615 protective tape 238 m 1197 2616 gi flashing 1.2 mm thick 239 m 1198 2617 6 mm thick high performance glass 240 m 1199 2618 6 mm thick clear heat strengthened glass 241 m 1200 2619 6 mm thick clear heat strengthened glass 242 m 1201 2620 arms gs hd top hung 20 type p couple 243 m 1202 2621 connection block for vision glass panel 244 m 1203 2622 curtain wall striker for vision glass panel 245 m 1204 2623 adjustable fastening pawl for vision glass panel 246 m 1205 2624 corner drive for vision glass panel 247 m 1206 2625 top wedge block for vision glass panel 248 m 1207 2630 baker rod 249 m 1208 2632 fire stop 250 m 1209 3228 600x120 mm glass shelf with anodised aluminium angle frame,c.p. brass brackets and guard rail of standard size 251 m 1210 3992 galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series casement window/door frame, sash, mullion, big & small series sliding window frame 252 m 1211 3994 galvanized iron (1.6 ± 0.2 mm) thick reinforcement for big series sliding window / door sash 253 m 1212 3995 g.i fasteners 100 x 8 mm 254 m 1213 4001 stainless steel (grade 304)hollow section round/square tubes 255 m 1214 4002 stainless steel bolts/square bar and plates 256 m 1215 4006 pressed steel door frames (mild steel sheet 1.60 mm) profile b 257 m 1216 4007 pressed steel door frames (mild steel sheet 1.60 mm) profile c 258 m 1217 4008 pressed steel door frames (mild steel sheet 1.60 mm) profile e 259 m 1218 4009 mild steel tubes hot finished welded type 260 m 1219 4010 mild steel tubes hot finished seamless type 261 m 1220 4011 mild steel tubes electric resistant or induction butt welded 262 m 1221 4012 circular c.i. box for ceiling fan internal dia 140 mm, 73 mm height, toplid of 1.5mm thick ms sheet 263 m 1222 4202 red oxide zinc chromate primer 264 m 1223 7001 brass 100mm mortice latch and lock with 6 levers without pair of handles 265 m 1224 7003 pair of anodised aluminium lever handles for 100 mm mortice latch and lock 266 m 1225 7009 12.5 mm thick tapered edge plain gypsum plaster borad confirming to is 2095 (part i) : 2011 267 m 1226 7010 galvanised steel ceiling section (size 80x26x0.50 mm) 268 m 1227 7011 galvanised steel perimetre channel (size 20x27x30x0.50 mm) 269 m 1228 7012 galvanised steel intermediate channel (size 15x45x15x0.90 mm) 270 m 1229 7013 galvanised steel angle hanger (celling angle) (size 25x10x0.50 mm) 271 m 1230 7014 galvanised steel connecting clips (2.64 mm dia and 230 mm long gi wire) 272 m 1231 7015 galvanised steel soffit cleat (size 27x37x25x0.60 mm) 273 m 1232 7016 joint filler 274 m 1233 7017 joint finisher 275 m 1234 7018 joint tape roll 276 m 1235 7020 all drive screws (for gypsum board) 277 m 1236 7021 primer (for gypsum board) 278 m 1237 7022 chlorpyriphos 20% e.c. / lindane 20% e.c. 279 m 1238 7024 acid proof cement 280 m 1239 7025 self tapping pan head nickel coated mild steel screws of size 13 x3.2 mm 281 m 1240 7026 fibre joint tape 50 mm wide (90 metre) roll 282 m 1241 7028 12.5 mm thick fully perforated gypsum board 283 m 1242 7029 galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm 284 m 1243 7031 12.5 mm thick tapered edge moisture resistant plain gypsum plaster board confirming to is 2095 (part i) : 2011 285 m 1244 7033 nickel plated m.s. pipe 25 mm dia 286 m 1245 7034 nickel plated m.s. pipe 20 mm dia 287 m 1246 7035 nickel plated m.s. brackets for curtain rod 20 mm 288 m 1247 7036 nickel plated m.s brackets for curtain rod 25 mm 289 m 1248 7040 oxidised mild steel screws 35 mm 290 m 1249 7048 rawl plug 50 mm (designation 10 nos) 291 m 1250 7056 aluminium tee channel (heavy duty) with rollers and stop end 292 m 1251 7059 aluminium hanging floor door stopper with twin rubber & stopper 293 m 1252 7060 hydraulic door closer tubular type aluminium section body 294 m 1253 7070 chequered precast cement concrete tiles 22 mm thick using marble chips of size 6mm light shade using white cement 295 m 1254 7077 acid and alkali resistant tiles 300x300 mm size, 10 mm thick 296 m 1255 7097 stainless steel kitchen sink with drain board 510 x 1040 mm bowl depth 200 mm 297 m 1256 7101 stainless steel kitchen sink without drain board 610x510 mm bowl depth 200 mm 298 m 1257 7107 coloured (other than black) solid p.v.c. seat in european w.c. pan 299 m 1258 7112 circular shape 450 mm dia mirror with plastic moulded frame 300 m 1259 7113 rectangular shape 453x357 mm mirror with plastic moulded frame 301 m 1260 7114 oval shape 450x350 mm (outer dimensions) mirror with plastic moulded frame 302 m 1261 7115 rectangular shape 1500x450 mm mirror with plastic moulded frame 303 m 1262 7116 hard board 6 mm thick 304 m 1263 7119 flexible (coil shaped) pvc waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c pvc waste fittings 305 m 1264 7120 flexible (coil shaped) pvc waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c pvc waste fittings 306 m 1265 7188 u pvc pipes (working pressure 4 kg / cm²) single socketed pipe 75 mm dia 307 m 1266 7189 u pvc pipes (working pressure 4 kg / cm²) single socketed pipe 110 mm dia 308 m 1267 7190 u pvc pipes (working pressure 4 kg / cm²) rubber (seal) ring 75 mm dia 309 m 1268 7191 u pvc pipes (working pressure 4 kg / cm²) rubber (seal) ring 110 mm dia 310 m 1269 7192 upvc coupler for upvc drainage pipes 75 mm 311 m 1270 7193 upvc coupler for upvc drainage pipes 110 mm 312 m 1271 7194 upvc pushfit coupler (single) 75 mm thick 313 m 1272 7195 upvc pushfit coupler (single) 110 mm thick 314 m 1273 7196 upvc single equal tee (without door) 75x75x75 mm 315 m 1274 7197 upvc single equal tee (without door) 110x110x110 mm 316 m 1275 7198 upvc single equal tee (with door) 75x75x75 mm 317 m 1276 7199 upvc single equal tee (with door) 110x110x110 mm 318 m 1277 7208 upvc bend 87.5° 75 mm bend 319 m 1278 7209 upvc bend 87.5° 110 mm bend 320 m 1279 7212 upvc plain shoe 75 mm bend 321 m 1280 7213 upvc plain shoe 110 mm bend 322 m 1281 7214 upvc pipe clip 75 mm bend 323 m 1282 7215 upvc pipe clip 110 mm bend 324 m 1283 7236 precast chequered cement tiles 22 mm thick dark shade using ordinary cement 325 m 1284 7237 precast chequered cement tiles 22 mm thick medium shade using 50% white cement 50% ordinary cement 326 m 1285 7239 epoxy paint 327 m 1286 7241 melamine polish 328 m 1287 7244 table rubbed polished stone 18mm thick (75x50cm) granite stone 18 mm thick 329 m 1288 7266 pressed clay tiles 20mm thick 250x250 mm size 330 m 1289 7274 glass wool 50 mm thick 331 m 1290 7297 granite of any colour, 18 mm thick (slab area above 0.50 sqm) 332 m 1291 7306 aluminium t or l sections 333 m 1292 7346 double coupler 334 m 1293 7349 12 mm m.s. u beading 335 m 1294 7359 p.v.c. automatic flushing cistern 5 litre capacity 336 m 1295 7366 glass reinforced gypsum (grg) plaster board 12.5 mm thick confirming to is 2095 (part 3) : 1996 337 m 1296 7367 galvanised m.s. sheet 0.5 mm thick pressed channel section of size 50x32 mm 338 m 1297 7369 galvanised m.s. sheet 0.50 mm thick pressed stud : 48x34x36 mm 339 m 1298 7379 white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556 340 m 1299 7383 12 mm dia 50 mm long wedge type expanded zinc alloy dash fastener 341 m 1300 7387 spigot for standard jointing 342 m 1301 7388 dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt 343 m 1302 7389 anodising 15 microns on aluminium sections 344 m 1303 7390 epdm gasket for upvc window/door 345 m 1304 7391 anodising 25 microns on aluminium sections 346 m 1305 7392 powder coating 50 microns on aluminium sections 347 m 1306 7393 polyester powder coating 50 microns on aluminium sections 348 m 1307 7394 double action hydraulic floor spring with stainless steel cover plate 349 m 1308 7395 6 mm dia g.i. adjustable hangers including clips (up to 1.2 m length) 350 m 1309 7396 double action hydraulic floor spring with brass cover plate 351 m 1310 7397 base jack 352 m 1311 7398 challies 353 m 1312 7399 cup locks 354 m 1313 7477 prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) grade i, type ii conforming to is : 12823 (exterior grade) 12 mm thick 355 m 1314 7480 prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded (medium density) grade i, type ii conforming to is : 12823 (exterior grade) 12 mm thick 356 m 1315 7745 pvc blind pipe 150 mm dia as per is: 12818 357 m 1316 7746 pvc blind pipe 200 mm dia as per is: 12818 358 m 1317 7751 pvc slotted pipe 150 mm dia as per is: 12818 359 m 1318 7752 pvc slotted pipe 200 mm dia as per is: 12818 360 m 1319 7758 upvc blind pipe 100 mm dia as per is: 12818 361 m 1320 7759 upvc slotted pipe 100 mm dia as per is: 12818 362 m 1321 7913 epoxy 363 m 1322 7914 sbr polymer 364 m 1323 7927 acrylic polymer chemical for cracks 365 m 1324 8001 24 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish 366 m 1325 8002 30 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish 367 m 1326 8010 48mmx40mmx1.5mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish 368 m 1327 8121 upvc extruded (small series) casement window frame size 47x50mm 369 m 1328 8122 upvc extruded (small series) casement window sash/window mullion size 47x68 mm 370 m 1329 8125 upvc extruded glazing bead of appropriate dimension for small series casement window sash 371 m 1330 8132 upvc extruded glazing bead of appropriate dimension for big series of sliding window/ door sash 372 m 1331 8136 upvc extruded (big series) 3 track sliding window/door frame size 116x45mm 373 m 1332 8137 upvc extruded (small series) 2 track sliding window sash/3 track sliding window sash size 32x60mm 374 m 1333 8138 upvc extruded (big series) 2 track sliding window sash size 46x62mm 375 m 1334 8139 upvc extruded (big series) 3 track sliding window sash size 46x62mm 376 m 1335 8140 upvc extruded interlock of appropriate dimension for small series sliding window sash 377 m 1336 8141 upvc extruded interlock of appropriate dimension for big series sliding window/ door sash 378 m 1337 8142 upvc extruded inline adaptor of appropriate dimension for big series sliding window/door sash 379 m 1338 8143 upvc extruded 2 track sliding door sash/ 3 track sliding door sash (big series) size 46x82mm 380 m 1339 8205 a.p.p. modified 3 mm thick membrane reinforced with polyester matt 381 m 1340 8206 bitumen primer for bitumen membrane 382 m 1341 8207 geotextile 120 grams per sqm membrane 383 m 1342 8210 stainless steel screws 50 mm 384 m 1343 8211 stainless steel screws 40 mm 385 m 1344 8226 concealed zinc coated hinges 19 20 mm thick with mounting plate 386 m 1345 8505 acrylic exterior paint 387 m 1346 8506 premium acrylic exterior paint 388 m 1347 8507 textured exterior paint 389 m 1348 8515 galavanised ms 8 mm outer diameter m 6 dash fastener 50mm long 390 m 1349 8555 g.i main runner 15 x32 mm of 3000 mm length, 0.33 mm thick 391 m 1350 8556 g.i cross t 15 x32 mm of 1200 mm length, 0.33 mm thick 392 m 1351 8563 15 mm thick, light weight, integral densified micro look edged,false ceiling tiles of size 595x595 mm. 393 m 1352 8564 15 mm thick, light weight,fully perforated square/butt edge integral densified,false ceiling tiles of size 595x595 mm. 394 m 1353 8566 powder coated steel section main t ceiling sections 15x42x0.40 mm (3000 mm long) 395 m 1354 8567 galvanized mild steel perimeter wall angle 22x19x0.40 mm (3000mm long) 396 m 1355 8568 powder coated galvanised iron intermediate cross t section 15x42x0.40 mm (1200 mm long) 397 m 1356 8569 powder coated galvanized iron intermediate cross t section 15x42x 0.40mm (600 mm long ) 398 m 1357 8581 12 mm thick micro tegular edged semi perforated grg (glass fibre reinforced gypsum) false celing tiles of size 595x595 mm 399 m 1358 8582 12 mm thick micro tegular edged fully perforated grg (glass fibre reinforced gypsum) false celing tiles of size 595x595 mm 400 m 1359 8587 galvanized iron intermediate cross t section 15x32x0.33 mm (600mm long) 401 m 1360 8588 galavanised ms hanger rod 6mm dia ms fully threaded up to 1000mm length 402 m 1361 8589 calcium silicate tegular edged celling tiles 595x595 mm and 15 mm thick on edges 403 m 1362 8590 galvanised steel main tee ceiling section size 24x38x0.33 mm (3 metre long) 404 m 1363 8591 galvanised steel perimeter wall angle size 24 x 24 x 0.40 mm (3.00 metre long) 405 m 1364 8592 galvanised steel intermediate cross t section size 24 x 25 x 0.33mm (1.2 metre long) 406 m 1365 8593 galvanised steel intermediate cross t section size 24 x 25 x 0.33mm (0.6 metre long) 407 m 1366 8596 galvanised ms 8mm outer diameter m 6 dash fastener 25mm long 408 m 1367 8599 gi metal tile lay in plain tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick 409 m 1368 8600 gi metal tile lay in perforated tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick 410 m 1369 8601 pvc laminated gypsum tiles (square edge) of size 595x595 mm and 12.5 mm thick 411 m 1370 8602 gypsum tiles fully perforated square edge of size 595x595 mm and 12.5 mm thick 412 m 1371 8611 main t ceiling sections 24x38x0.3 mm (3 metre long) 413 m 1372 8612 perimeter wall angle 24 x 24 x 0.3 mm (3 metre long) 414 m 1373 8613 intermediate cross t section 24x25x0.3 mm (1.2 m long) 415 m 1374 8614 intermediate cross t section 24x25x0.3 mm (0.6 m long) 416 m 1375 8615 hanger rod 4 mm thick 417 m 1376 8616 adjustment clip 85x30x0.8 mm 418 m 1377 8617 soffit cleat (size 27x37x25x1.60 mm) 419 m 1378 8619 galavanised ms l shape level adjuster of size 85x25x2 mm 420 m 1379 8620 vitrified floor tile 50x50 cm conforming to is 15622:2006 group (b1a) 421 m 1380 8624 border tiles 200x75mm size 422 m 1381 8636 chlorinated polyvinyl chloride (cpvc) pipe 15 mm outer dia 423 m 1382 8637 chlorinated polyvinyl chloride (cpvc) pipe 20 mm outer dia 424 m 1383 8638 chlorinated polyvinyl chloride (cpvc) pipe 25 mm outer dia 425 m 1384 8639 chlorinated polyvinyl chloride (cpvc) pipe 32 mm outer dia 426 m 1385 8640 chlorinated polyvinyl chloride (cpvc) pipe 40 mm outer dia 427 m 1386 8641 chlorinated polyvinyl chloride (cpvc) pipe 50 mm outer dia 428 m 1387 8642 chlorinated polyvinyl chloride (cpvc) pipe 62.5 mm inner dia 429 m 1388 8643 chlorinated polyvinyl chloride (cpvc) pipe 75 mm inner dia 430 m 1389 8644 chlorinated polyvinyl chloride (cpvc) pipe 100 mm inner dia 431 m 1390 8645 chlorinated polyvinyl chloride (cpvc) pipe 150 mm inner dia 432 m 1391 8646 weather silicon sealant 433 m 1392 8647 stainless steel screws 30 mm x4 mm 434 m 1393 8654 masking tape 435 m 1394 8655 autoclaved aerated cement (aac) blocks 436 m 1395 8660 aluminium casement window fastener (anodised ac 15) 437 m 1396 8661 aluminium casement window fastener (powder coated ) 438 m 1397 8662 aluminium casement window fastener (polyester powder coated) 439 m 1398 8666 stainless steel screws 25 mm x4 mm 440 m 1399 8671 precoated galvanised iron profile sheet 0.50 mm tct 441 m 1400 8672 precoated galvanised steel plain ridges 0.50 mm tct and 500 600mm wide 442 m 1401 8686 precast c.c. kerb stone m 25 443 m 1402 8689 interlocking c.c. paver block ( 60 mm thick, m 30) 444 m 1403 8691 punched tape concertina coil 600 mm dia 10 m openable length (total length 90 m) 445 m 1404 8692 rbt reinforced barbed wire 446 m 1405 8693 turn buckle and strengthening bolt 447 m 1406 8695 chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm 448 m 1407 8696 chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm, pvc coated to outer dia 5 mm 449 m 1408 8697 chain link fabric fencing mesh of size 25x25 mm made of g.i. wire of dia 3 mm 450 m 1409 8698 stainless steel cramps(weight 260 grams) with nuts, bolts and washer for dry stone cladding 451 m 1410 8703 telescopic drawer channels 300 mm long 452 m 1411 8704 stainless steel roller for sliding arrangement in racks/ cupboards/cabinets shutter 453 m 1412 8705 50 mmx42 mmx2 mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish 454 m 1413 8706 25 mm thick factory made pvc flush door shutter i/c carriage 455 m 1414 8714 magnetic catcher triple strip vertical type 456 m 1415 8715 magnetic catcher double strip horizontal type 457 m 1416 8716 100 mm mortice lock with 6 levers for aluminium door 458 m 1417 8731 high polymer modified quickset tile adhesive 459 m 1418 8737 stainless steel wire guage (grade 304) aperture 1.4 mm and 0.50mm dia wire 460 m 1419 8751 zinc alloy (white powder coated) touch lock withhook for upvc window/door 461 m 1420 8752 zinc alloy body with single nylon roller (weight bearing capacity to be 40 kg) for upvc sliding window 462 m 1421 8753 stainless steel (ss 304) with adjustable double nylon roller (weight bearing capacity to be 120 kg) for upvc sliding door/window 463 m 1422 8754 zinc alloy (white powder coated) cresent lock for upvc sliding door/window 464 m 1423 8755 stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for upvc windows 465 m 1424 8756 stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for upvc windows 466 m 1425 8757 stainless steel friction hinges (ss 304 grade) size 300 x 19 x 1.9 mm for upvc window 467 m 1426 8758 stainless steel friction hinges (ss 304 grade) size 350 x 19 x 1.9 mm for upvc window 468 m 1427 8759 stainless steel friction hinges (ss 304 grade) size 400 x 19 x 1.9 mm for upvc window 469 m 1428 8773 wool pile/ weather pile strip for upvc sliding window 470 m 1429 8774 aluminium grill as per is 1868 471 m 1430 8778 toughened glass 12 mm thickness 472 m 1431 8784 8 mm thick calcium silicate perforated tiles of size 595 x595 mm 473 m 1432 2751 8 mm thick marble tiles (polished) raj nagar 474 m 1433 590 chromium plated brass curtain rod 12 mm dia 1.25mm thick 475 m 1434 7023 chromium plated brackets ( curtain rods) 476 m 1435 458 pvc cleeves for screws 477 m 1436 591 chromium plated brass curtain rod 20 mm dia 1.25mm thick 478 m 1437 592 chromium plated brass curtain rod 25 mm dia 1.25mm thick ...

Building Construction Department - Jharkhand

26179211 notice inviting e quotation by building division khunti 1 brick 75a 2 cold twisted bars ( hysd bars ) as per is:1786 2008 average rate 3 corrosion resistant structural steel 4 paint 5 cement primer 6 primer 7 structural steel average rate 8 tiles size 300 x 300 mm and 25 mm thick 9 timber 10 water based cement paint 11 wooden ballies 2 dia for bracing 12 wooden ballies 8 dia and 9 m long ( 9 m @ rs. 43.00 / m ) 13 wooden packing 14 wooden staff for fastening of flag 25 mm dia, 1.0 m long 15 ( a ) 75b brick ( b ) fly ash lime bricks ( falg ) brick conforming to is 12894 1990 ( 9 x 4.5 x 3 ) 100 a at source ( c ) brick tiles ( 300mm x 150 mmx 50 mm ) ( d ) picket jhama brick ( e ) jhama khoa / metal ( f ) bangla bhattas brick of size 9 3 / 4 x 4 3 / 4 x 2 3 / 4 ( 248 mm x121 mm x 70 mm ) inclusive of royalty but exclusive of gst . ( 1 ) 75 b ( 2 ) jhama bricks note : in areas where bricks manufacture are of less size, the rate may be derived by reducing the rate in item [ 271 ( d ) & ( f ) ] in proportion of the bricks rounding to nearest rs. 5.00 16 bricks bats at kiln site 17 rough dressed stone boulder for masonry works. 18 seasonel sal wood scantling 19 sal planks : ( i ) 25 mm to 40 mm ( ii ) 12 mm to 20 mm 20 teak wood : ( i ) scantling ( ii ) planks 25 mm to 40 mm ( iii ) planks 12 mm to 20 mm 21 sisum wood ( i ) scantling ( ii ) planks 25 mm to 40 mm ( iii ) planks 12 mm to 20 mm 22 seasoned gamhar wood scantling ( local ) 23 local wood ( i ) scantling ( ii ) planks 25 mm to 40 mm ( iii ) planks 12 mm to 20 mm 24 bamboo ( i ) 75 mm dia 6 m long to 8 m long ( ii ) 100 mm dia 6 m long to 8 m long ( iii ) 50 mm dia hill bamboo 25 sal ballah post ( i ) 100 mm dia ( ii ) 125 mm dia ( iii ) 150 mm dia 26 butt hinges as per clause 562 of building specification of building construction deptt. of size. 26.01 ( i ) 75 mm 26.02 ( ii ) 100 mm 27 ( i ) teak ply 4 mm thick ( ii ) teak ply 6 mm thick 28 ply wood ( national or equivalant make ) ( i ) 25 mm thick ( ii ) 19 mm thick ( iii ) 12 mm thick ( iv ) 6 mm thick 29 orinary commercial ply ( i ) 3 mm thick ( ii ) 4 mm thick ( iii ) 6 mm thick 30 ( i ) sun mica best quality ( ii ) formica ( 1 mm ) 31 barbed wire of 4 point, 2 ply 12 swg, 150 mm apart 32 welded mesh ( 8 to 10 swg ) 100 to 125 mm square size 33 c.a. sheet ( i ) corrugated 6 mm thick 1.5 m to 3.05 m long. ( ii ) ( a ) plain 6 mm thick 2.4 m to 3.05 m long ( b ) plain 4 mm do ( iii ) c.a. ridge, valley 1 m long ( plain wing adjustable ) ( iv ) corrugated adjustable ridge 34 l drop 16 mm dia 300 mm long ( as per 5.6.5 of building specification of bcd ) with screw and all fittings. ( i ) aluminum ( ii ) iron ( copper oxidized ) 35 d handle iron, proper oxidized as per clause 5.6.7 of building specification of b.c.d. ( i ) 150 mm long ( ii ) 125 mm long ( iii ) 100 mm long 36 d handle made of 16 mm wide and 6 mm thick aluminum flat. ( i ) 150 mm long and 10 mm dia ( ii ) 100 mm long and 10 mm dia 37 aluminum pipe of 18 gauge ( i ) 12 mm dia ( ii ) 16 mm dia ( iii ) 20 mm dia 38 iron nails ( i ) 125 mm and below ( ii ) above 125 mm ( iii ) glass clip of wire 39 mild steel copper oxidized tower bolt as per clause 5.6.6 of building specification of b.c.d 10 mm dia, complete set. ( i ) 100 mm long ( ii ) 150 mm long ( iii ) 200 mm long ( iv ) 225 mm long ( v ) 300 mm long ( vi ) 450 mm long ( vii ) 600 mm long 40 aluminum tower bolt as per clause 5.6.6 of buillding specification of b.c.d. top quality, 10 mm dia ( i ) 100 mm long ( ii ) 120 mm long ( iii ) 150 mm long ( iv ) 200 mm long ( v ) 225 mm long ( vi ) 300 mm long 41 screw ( n.f ) ( i ) 75 mm size ( ii ) 60 mm size ( iii ) 50 mm size ( iv ) 40 mm size to 30 mm size ( v ) below 30 mm to 12 mm size 42 varnish standard make 43 sprit 44 ( i ) primer for wood work ( ii ) primer for steel work 45 shaliltex board ( for use as per expansion joint i.s. 1838 1938 filter ) ( i ) 25 mm thick ( ii ) 18 mm thick ( iii ) 12 mm thick 46 shalitex primer 47 double boiled llinseed oil 48 ( a ) aluminum paint standard make ( b ) synthetic enamel ( isi mark ) 49 plastic emulsion paint 50 dry distemper 51 oil bound distemper 52 snowcem powder 53 ( i ) cicko powder / inpermo waterproofing comp ) ( ii ) cicko liquid 54 robin blue 55 color for wash 56 whitening 57 putty 58 blackening powder 59 ( i ) 1st quality paint of different shades ( ii ) 2nd quality paint 60 wax polish ( 1 lit = 0.50 kg ) 61 french polish standard make 62 cotton 63 ram raj 64 shellex 65 narial coir string 66 narial rope 20 mm to 25 mm dia. 67 sutli 68 sabey string 69 cotton string 70 raniganj tiles 71 ridge for above 72 naria tiles 225 mm to 250 mm 73 ridge for above or mungra 74 narial rope above 25 mm dia 75 thatching grass in bundle ( consisting of small & average length of grass 2.75 m ) bundle 76 oxalic acid ( 1 lit. = 1 kg ) 77 iron clamp ( 460 mm x 40 mm x 6 mm ) 78 rolling shutter 1.02 mm thick 79 shalimar tarphelt bh ( type ii group 1 ) 80 ( a ) sun glass ( modi ) ( b ) plane glass panes ( i ) 2 mm thick ( ii ) 3 mm thick ( iii ) 4 mm thick ( iv ) 6 mm thick ( c ) pin hammered glass ( i ) 3 mm thick ( ii ) 4 mm thick ( iii ) 5 mm thick ( d ) 20 mm wide 4 mm thick glass strip for flooring 81 hessian cloth ( 0.3 kg / m2 cot. ) 82 gunny best quality 83 limpet washer 84 bitumen washer 85 plaster of peris 86 g.i. hook 150 mm to 10 mm dia 87 ( i ) 25 mm x 6 mm nuts & bolts ( ii ) 16 mm x 3.75 mm nuts & bolts ( iii ) 10 mm x 3.75 mm nuts & bolts 88 ( i ) fly proof wire netting ( 18 gauge wire with 12 16 nos, mesh per m2 ) ( ii ) fly proof wire netting ( light gauge ) 89 turpentine oil 90 manson polish 91 carborandum stones ( 4, 6, 8 & 10 nos ) 92 lime rubbish 93 slack coal grade c ( steam ) long flame 94 flush door ( hot pressed adhesive conforming to 2202 part 1 ) i.s. ( i ) 25 mm thick ( a ) both side commercial ( b ) one side teak ( c ) both side teak ( ii ) 32 mm thick ( a ) both side commercial ( b ) one side teak ( c ) both side teak ( iii ) 38 mm thick ( a ) both side commercial ( b ) one side teak ( c ) both side teak 95 ( a ) looking eye piece best quality 96 fevicol / ktcat / vamicol 97 boat spike ( 300 400 mm long ) 98 kotah stone tiles ( 15 mm 23 mm ) thick ( i ) 300 mm x 300 mm ( ii ) 375 mm x 375 mm ( iii ) 450 mm x 450 mm 99 white makrana marble stone 20 mm thick ( i ) 300 mm x 300 mm and below ( ii ) 300 mm x 600 mm and above 100 white glazed tiles 6 mm thick ( 150 x 150 mm size ) 101 commercial grade colour ceramic wall / floor tiles ( as per is 13712 ) ( i ) 150 mm x 150 mm ( ii ) 300 mm x 300mm ( iii ) 300 mm x 450mm ( iv ) 300mm x 600mm 102 dholpur tiles 15 mm x 23 mm thick ( i ) 275 mm x 275 mm to 300 mm x 600 mm ( ii ) 300 mm x 900 mm ( iii ) 600 mm x 1200 mm 103 mosaic / tarrazo tiles 20 mm thick in ordinary cement base. 104 mosaic / tarrazo tiles 20 mm thick in white cement base. 105 slacked stone lime 106 unslacked stone lime 107 colour pigment for cement : ( i ) red ( ii ) black ( iii ) green ( iv ) blue 108 marble dust ( daltonganj ) 109 marble chips ( i ) dehradoon ( ii ) daltanganj 110 marble chips coloured daltonganj 111 commercial particle board interior ( i ) 12 mm ( 600 mm x 600 mm ) size ( ii ) 25 mm ( 600 mm x 600 mm ) size 112 particle board exterior ( 600 mm x 600 mm size ) ( i ) 12 mm ( ii ) 25 mm 113 ( a ) 100 mm dia c.a. pipe ( b ) 100 mm dia c. bend 114 paint ( synthetic enamel ) 115 vitrified floor tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 15622 of approved make in all colours and shades.parking tiles ( industrial tiles ) 116 vitrified tiles tread of stairs of size 1200x300x15mm thick with water absorption less then 0.08% and conforming to is 15622of approved make in all colours and shades.size of tile 1200x300 mm for tread of stairs. 117 double charged vitrified floor tiles of size 600x600mm thick with water absorption less then 0.08% and conforming to is 15622 / iso 13006 of approved make in all colours and shades. 118 vitrified cool roof tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 154557 2007 / 1501 3006 of approved make in all colours and shades. 119 vitrified floor tiles of size 800x800mm with water absorption less then 0.08% and conforming to is 154557 2007 / 1501 3006 of approved make in all colours and shades. 120 vitrified floor tiles of size 1000x1000mm with water absorption less then 0.08% and conforming to is 154557 2007 / 1501 3006 of approved make in all colours and shades. 121 polysulphide ( poring grade ) ;density =1.65 gm / cc 122 polymer modified cementation coating 123 fibre glass cloth 124 chequered tiles cement concrete base 300x300x25mm 125 chequered tiles cement concrete base 300x300x40mm 126 brass screws 30 mm 127 plastic sleeves for screw 128 chromium plated brass screws 40 mm 129 chromium plated brass screws 30 mm 130 chromium plated brass screws 25 mm 131 chromium plated brass screws 20 mm 132 bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm 133 bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm 134 nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide 135 bright finished or black enameled mild steel screws 40 mm 136 bright finished or black enameled mild steel screws 25 mm 137 bright finished or black enameled mild steel screws 20 mm 138 bright finished or black enameled mild steel bolts and nuts 50x6 mm 139 oxidised mild steel butt hinges 125x65x2.12 mm 140 oxidised mild steel butt hinges 100x58x1.90 mm 141 oxidised mild steel butt hinges 75x47x1.70 mm 142 oxidised mild steel butt hinges 50x37x1.50 mm 143 oxidised mild steel parliamentary hinges 150x125x27x2.8 mm 144 oxidised mild steel parliamentary hinges 125x125x27x2.8 mm 145 oxidised mild steel parliamentary hinges 100x125x27x2.8 mm 146 oxidised mild steel parliamentary hinges 75x100x20x2.24 mm 147 oxidised mild steel sliding door bolt 300x16 mm 148 oxidised mild steel sliding door bolt 250x16 mm 149 oxidised mild steel tower bolt ( barrel type ) 250x10 mm 150 oxidised mild steel tower bolt ( barrel type ) 200x10 mm 151 oxidised mild steel tower bolt ( barrel type ) 150x10 mm 152 oxidised mild steel tower bolt ( barrel type ) 100x10 mm 153 oxidised mild steel handles 125 mm 154 oxidised mild steel handles 100 mm 155 oxidised mild steel handles 75 mm 156 oxidised mild steel screws 50 mm 157 oxidised mild steel screws 40 mm 158 oxidised mild steel screws 30 mm 159 oxidised mild steel screws 25 mm 160 oxidised mild steel screws 20 mm 161 anodised aluminium butt hinges 100x75x4 mm 162 anodised aluminium butt hinges 75x45x3.2 mm 163 anodised aluminium sliding door bolt 300x16 mm 164 anodised aluminium sliding door bolt 250x16 mm 165 anodised aluminium tower bolt ( barrel type ) 300x10 mm 166 anodised aluminium tower bolt ( barrel type ) 250x10 mm 167 anodised aluminium tower bolt ( barrel type ) 200x10 mm 168 anodised aluminium tower bolt ( barrel type ) 150x10 mm 169 anodised aluminium tower bolt ( barrel type ) 100x10 mm 170 anodised aluminium handles 125 mm with plate 175 x 32 mm 171 anodised aluminium handles 100 mm with plate 150 x 32 mm 172 anodised aluminium handles 75mm with plate 125 x 32 mm 173 anodised aluminium kicking plate 50 cm long 100x3.15 mm 174 exterior primer 175 black japan paint 176 superior copal varnish 177 oil type wood preservative 178 putty for wood work 179 plug 180 black colour dark shade pigment 181 red, chocolate, orange, buff or yellow ( red oxide of iron ) light shade pigment 182 green or blue medium shade pigment 183 ball bearing for rolling shutters 184 galvanised steel plain sheets 185 mild steel round bar 12 mm dia and below 186 structural steel such as tees, angles channels and r.s. joists 187 flats up to 10 mm in thickness 188 flats exceeding 10 mm in thickness 189 mild steel rivets 190 galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots 191 bolts and nuts up to 300 mm in length 192 bolts and nuts above 300 mm in length 193 superior class teak wood such as dandeli, balarshah or malabar in planks 194 first class teak wood in planks 195 second class teak wood in planks 196 second class deodar wood in planks 197 sal wood in scantling 198 precast heat resistant terrace tiles ( size 300x300 mm ) and 20 mm thick 199 g.i. plain washer thick 200 water proofing materials 201 welding by electric plant 202 20 mm dia holding down bolts 203 steel weld mesh 204 18 mm thick flamed finish granite stone slab 205 18 mm thick italian marble stone slab, perlato ( slab area up to 0.5 sqm ) . 206 commercial lpg in cylinder 207 surface box for stop cock 208 8 mm dia c.p. brass / s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c. 209 vitreous china pedestal for wash basin 210 flush pipe with union spreaders and clamps all in c.p. brass for single stall 211 flush pipe with union spreaders and clamps all in c.p. brass for double stall 212 stoneware pipes grade a ( 60 cm long ) 100 mm dia 213 white plastic seat ( solid ) with lid c.p. brass hinges and rubber buffers 214 black plastic seat ( solid ) with lid c.p. brass hinges and rubber buffers 215 c.i. trap for standard urinal with vent arm with operating and other couplings in c.p. brass: 50 mm dia 216 float glass panes of nominal thickness 4 mm ( weight not less than 10 kg / sqm ) 217 float glass panes of nominal thickness 5 mm ( weight not less than 12.50 kg / sqm ) 218 float glass panes of nominal thickness 8 mm ( weight not less than 20.00 kg / sqm ) 219 anodised aluminium hanging type door stopper 220 anodised aluminium pull bolt lock ( locking bolt ) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete 221 anodised aluminium casement stay 250 mm 222 pre laminated both side solid foam upvc profile ( 45x20mm ) 223 solid foam upvc sheet 20mm thick pre laminated on both side 224 pvc edge beading 225 expandable fastner with plastic sleeve 226 weather / structural non sag elastomeric pu sealant ( 600ml sausage ) for joints in rcc / brick / stone / wood / ceramic / gypsum / alluminium work complying to astm c920, din 18540 f & iso 11600 incl all taxes 227 structural sealant 6 mm x 12 mm 228 spacer tape 6.4 mm thick x 6 mm wide 229 weather sealant non staining ( 600 ml ) 230 weather sealant normal ( 300 ml ) 231 ms brackets / aluminium alloy brackets 232 silicon gasket in kg ( above 50 g / m ) 233 epdm gasket in kg ( above 60 g / m ) 234 anchor fastner m10 235 ss bolt with washer of different sizes for structural glazing / acp cladding 236 ss screws of sizes for structural glazing / acp cladding 237 protective tape 238 gi flashing 1.2 mm thick 239 6 mm thick high performance glass 240 6 mm thick clear heat strengthened glass 241 6 mm thick clear heat strengthened glass 242 arms gs hd top hung 20 type p couple 243 connection block for vision glass panel 244 curtain wall striker for vision glass panel 245 adjustable fastening pawl for vision glass panel 246 corner drive for vision glass panel 247 top wedge block for vision glass panel 248 baker rod 249 fire stop 250 600x120 mm glass shelf with anodised aluminium angle frame, c.p. brass brackets and guard rail of standard size 251 galvanized iron ( 1.6 ± 0.2 mm ) thick reinforcement for big series casement window / door frame, sash, mullion, big & small series sliding window frame 252 galvanized iron ( 1.6 ± 0.2 mm ) thick reinforcement for big series sliding window / door sash 253 g.i fasteners 100 x 8 mm 254 stainless steel ( grade 304 ) hollow section round / square tubes 255 stainless steel bolts / square bar and plates 256 pressed steel door frames ( mild steel sheet 1.60 mm ) profile b 257 pressed steel door frames ( mild steel sheet 1.60 mm ) profile c 258 pressed steel door frames ( mild steel sheet 1.60 mm ) profile e 259 mild steel tubes hot finished welded type 260 mild steel tubes hot finished seamless type 261 mild steel tubes electric resistant or induction butt welded 262 circular c.i. box for ceiling fan internal dia 140 mm, 73 mm height, toplid of 1.5mm thick ms sheet 263 red oxide zinc chromate primer 264 brass 100mm mortice latch and lock with 6 levers without pair of handles 265 pair of anodised aluminium lever handles for 100 mm mortice latch and lock 266 12.5 mm thick tapered edge plain gypsum plaster borad confirming to is 2095 ( part i ) : 2011 267 galvanised steel ceiling section ( size 80x26x0.50 mm ) 268 galvanised steel perimetre channel ( size 20x27x30x0.50 mm ) 269 galvanised steel intermediate channel ( size 15x45x15x0.90 mm ) 270 galvanised steel angle hanger ( celling angle ) ( size 25x10x0.50 mm ) 271 galvanised steel connecting clips ( 2.64 mm dia and 230 mm long gi wire ) 272 galvanised steel soffit cleat ( size 27x37x25x0.60 mm ) 273 joint filler 274 joint finisher 275 joint tape roll 276 all drive screws ( for gypsum board ) 277 primer ( for gypsum board ) 278 chlorpyriphos 20% e.c. / lindane 20% e.c. 279 acid proof cement 280 self tapping pan head nickel coated mild steel screws of size 13 x3.2 mm 281 fibre joint tape 50 mm wide ( 90 metre ) roll 282 12.5 mm thick fully perforated gypsum board 283 galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm 284 12.5 mm thick tapered edge moisture resistant plain gypsum plaster board confirming to is 2095 ( part i ) : 2011 285 nickel plated m.s. pipe 25 mm dia 286 nickel plated m.s. pipe 20 mm dia 287 nickel plated m.s. brackets for curtain rod 20 mm 288 nickel plated m.s brackets for curtain rod 25 mm 289 oxidised mild steel screws 35 mm 290 rawl plug 50 mm ( designation 10 nos ) 291 aluminium tee channel ( heavy duty ) with rollers and stop end 292 aluminium hanging floor door stopper with twin rubber & stopper 293 hydraulic door closer tubular type aluminium section body 294 chequered precast cement concrete tiles 22 mm thick using marble chips of size 6mm light shade using white cement 295 acid and alkali resistant tiles 300x300 mm size, 10 mm thick 296 stainless steel kitchen sink with drain board 510 x 1040 mm bowl depth 200 mm 297 stainless steel kitchen sink without drain board 610x510 mm bowl depth 200 mm 298 coloured ( other than black ) solid p.v.c. seat in european w.c. pan 299 circular shape 450 mm dia mirror with plastic moulded frame 300 rectangular shape 453x357 mm mirror with plastic moulded frame 301 oval shape 450x350 mm ( outer dimensions ) mirror with plastic moulded frame 302 rectangular shape 1500x450 mm mirror with plastic moulded frame 303 hard board 6 mm thick 304 flexible ( coil shaped ) pvc waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i / c pvc waste fittings 305 flexible ( coil shaped ) pvc waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i / c pvc waste fittings 306 u pvc pipes ( working pressure 4 kg / cm² ) single socketed pipe 75 mm dia 307 u pvc pipes ( working pressure 4 kg / cm² ) single socketed pipe 110 mm dia 308 u pvc pipes ( working pressure 4 kg / cm² ) rubber ( seal ) ring 75 mm dia 309 u pvc pipes ( working pressure 4 kg / cm² ) rubber ( seal ) ring 110 mm dia 310 upvc coupler for upvc drainage pipes 75 mm 311 upvc coupler for upvc drainage pipes 110 mm 312 upvc pushfit coupler ( single ) 75 mm thick 313 upvc pushfit coupler ( single ) 110 mm thick 314 upvc single equal tee ( without door ) 75x75x75 mm 315 upvc single equal tee ( without door ) 110x110x110 mm 316 upvc single equal tee ( with door ) 75x75x75 mm 317 upvc single equal tee ( with door ) 110x110x110 mm 318 upvc bend 87.5° 75 mm bend 319 upvc bend 87.5° 110 mm bend 320 upvc plain shoe 75 mm bend 321 upvc plain shoe 110 mm bend 322 upvc pipe clip 75 mm bend 323 upvc pipe clip 110 mm bend 324 precast chequered cement tiles 22 mm thick dark shade using ordinary cement 325 precast chequered cement tiles 22 mm thick medium shade using 50% white cement 50% ordinary cement 326 epoxy paint 327 melamine polish 328 table rubbed polished stone 18mm thick ( 75x50cm ) granite stone 18 mm thick 329 pressed clay tiles 20mm thick 250x250 mm size 330 glass wool 50 mm thick 331 granite of any colour, 18 mm thick ( slab area above 0.50 sqm ) 332 aluminium t or l sections 333 double coupler 334 12 mm m.s. u beading 335 p.v.c. automatic flushing cistern 5 litre capacity 336 glass reinforced gypsum ( grg ) plaster board 12.5 mm thick confirming to is 2095 ( part 3 ) : 1996 337 galvanised m.s. sheet 0.5 mm thick pressed channel section of size 50x32 mm 338 galvanised m.s. sheet 0.50 mm thick pressed stud : 48x34x36 mm 339 white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556 340 12 mm dia 50 mm long wedge type expanded zinc alloy dash fastener 341 spigot for standard jointing 342 dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt 343 anodising 15 microns on aluminium sections 344 epdm gasket for upvc window / door 345 anodising 25 microns on aluminium sections 346 powder coating 50 microns on aluminium sections 347 polyester powder coating 50 microns on aluminium sections 348 double action hydraulic floor spring with stainless steel cover plate 349 6 mm dia g.i. adjustable hangers including clips ( up to 1.2 m length ) 350 double action hydraulic floor spring with brass cover plate 351 base jack 352 challies 353 cup locks 354 prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded ( medium density ) grade i, type ii conforming to is : 12823 ( exterior grade ) 12 mm thick 355 prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded ( medium density ) grade i, type ii conforming to is : 12823 ( exterior grade ) 12 mm thick 356 pvc blind pipe 150 mm dia as per is: 12818 357 pvc blind pipe 200 mm dia as per is: 12818 358 pvc slotted pipe 150 mm dia as per is: 12818 359 pvc slotted pipe 200 mm dia as per is: 12818 360 upvc blind pipe 100 mm dia as per is: 12818 361 upvc slotted pipe 100 mm dia as per is: 12818 362 epoxy 363 sbr polymer 364 acrylic polymer chemical for cracks 365 24 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish 366 30 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish 367 48mmx40mmx1.5mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish 368 upvc extruded ( small series ) casement window frame size 47x50mm 369 upvc extruded ( small series ) casement window sash / window mullion size 47x68 mm 370 upvc extruded glazing bead of appropriate dimension for small series casement window sash 371 upvc extruded glazing bead of appropriate dimension for big series of sliding window / door sash 372 upvc extruded ( big series ) 3 track sliding window / door frame size 116x45mm 373 upvc extruded ( small series ) 2 track sliding window sash / 3 track sliding window sash size 32x60mm 374 upvc extruded ( big series ) 2 track sliding window sash size 46x62mm 375 upvc extruded ( big series ) 3 track sliding window sash size 46x62mm 376 upvc extruded interlock of appropriate dimension for small series sliding window sash 377 upvc extruded interlock of appropriate dimension for big series sliding window / door sash 378 upvc extruded inline adaptor of appropriate dimension for big series sliding window / door sash 379 upvc extruded 2 track sliding door sash / 3 track sliding door sash ( big series ) size 46x82mm 380 a.p.p. modified 3 mm thick membrane reinforced with polyester matt 381 bitumen primer for bitumen membrane 382 geotextile 120 grams per sqm membrane 383 stainless steel screws 50 mm 384 stainless steel screws 40 mm 385 concealed zinc coated hinges 19 20 mm thick with mounting plate 386 acrylic exterior paint 387 premium acrylic exterior paint 388 textured exterior paint 389 galavanised ms 8 mm outer diameter m 6 dash fastener 50mm long 390 g.i main runner 15 x32 mm of 3000 mm length, 0.33 mm thick 391 g.i cross t 15 x32 mm of 1200 mm length, 0.33 mm thick 392 15 mm thick, light weight, integral densified micro look edged, false ceiling tiles of size 595x595 mm. 393 15 mm thick, light weight, fully perforated square / butt edge integral densified, false ceiling tiles of size 595x595 mm. 394 powder coated steel section main t ceiling sections 15x42x0.40 mm ( 3000 mm long ) 395 galvanized mild steel perimeter wall angle 22x19x0.40 mm ( 3000mm long ) 396 powder coated galvanised iron intermediate cross t section 15x42x0.40 mm ( 1200 mm long ) 397 powder coated galvanized iron intermediate cross t section 15x42x 0.40mm ( 600 mm long ) 398 12 mm thick micro tegular edged semi perforated grg ( glass fibre reinforced gypsum ) false celing tiles of size 595x595 mm 399 12 mm thick micro tegular edged fully perforated grg ( glass fibre reinforced gypsum ) false celing tiles of size 595x595 mm 400 galvanized iron intermediate cross t section 15x32x0.33 mm ( 600mm long ) 401 galavanised ms hanger rod 6mm dia ms fully threaded up to 1000mm length 402 calcium silicate tegular edged celling tiles 595x595 mm and 15 mm thick on edges 403 galvanised steel main tee ceiling section size 24x38x0.33 mm ( 3 metre long ) 404 galvanised steel perimeter wall angle size 24 x 24 x 0.40 mm ( 3.00 metre long ) 405 galvanised steel intermediate cross t section size 24 x 25 x 0.33mm ( 1.2 metre long ) 406 galvanised steel intermediate cross t section size 24 x 25 x 0.33mm ( 0.6 metre long ) 407 galvanised ms 8mm outer diameter m 6 dash fastener 25mm long 408 gi metal tile lay in plain tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick 409 gi metal tile lay in perforated tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick 410 pvc laminated gypsum tiles ( square edge ) of size 595x595 mm and 12.5 mm thick 411 gypsum tiles fully perforated square edge of size 595x595 mm and 12.5 mm thick 412 main t ceiling sections 24x38x0.3 mm ( 3 metre long ) 413 perimeter wall angle 24 x 24 x 0.3 mm ( 3 metre long ) 414 intermediate cross t section 24x25x0.3 mm ( 1.2 m long ) 415 intermediate cross t section 24x25x0.3 mm ( 0.6 m long ) 416 hanger rod 4 mm thick 417 adjustment clip 85x30x0.8 mm 418 soffit cleat ( size 27x37x25x1.60 mm ) 419 galavanised ms l shape level adjuster of size 85x25x2 mm 420 vitrified floor tile 50x50 cm conforming to is 15622:2006 group ( b1a ) 421 border tiles 200x75mm size 422 chlorinated polyvinyl chloride ( cpvc ) pipe 15 mm outer dia 423 chlorinated polyvinyl chloride ( cpvc ) pipe 20 mm outer dia 424 chlorinated polyvinyl chloride ( cpvc ) pipe 25 mm outer dia 425 chlorinated polyvinyl chloride ( cpvc ) pipe 32 mm outer dia 426 chlorinated polyvinyl chloride ( cpvc ) pipe 40 mm outer dia 427 chlorinated polyvinyl chloride ( cpvc ) pipe 50 mm outer dia 428 chlorinated polyvinyl chloride ( cpvc ) pipe 62.5 mm inner dia 429 chlorinated polyvinyl chloride ( cpvc ) pipe 75 mm inner dia 430 chlorinated polyvinyl chloride ( cpvc ) pipe 100 mm inner dia 431 chlorinated polyvinyl chloride ( cpvc ) pipe 150 mm inner dia 432 weather silicon sealant 433 stainless steel screws 30 mm x4 mm 434 masking tape 435 autoclaved aerated cement ( aac ) blocks 436 aluminium casement window fastener ( anodised ac 15 ) 437 aluminium casement window fastener ( powder coated ) 438 aluminium casement window fastener ( polyester powder coated ) 439 stainless steel screws 25 mm x4 mm 440 precoated galvanised iron profile sheet 0.50 mm tct 441 precoated galvanised steel plain ridges 0.50 mm tct and 500 600mm wide 442 precast c.c. kerb stone m 25 443 interlocking c.c. paver block ( 60 mm thick, m 30 ) 444 punched tape concertina coil 600 mm dia 10 m openable length ( total length 90 m ) 445 rbt reinforced barbed wire 446 turn buckle and strengthening bolt 447 chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm 448 chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm, pvc coated to outer dia 5 mm 449 chain link fabric fencing mesh of size 25x25 mm made of g.i. wire of dia 3 mm 450 stainless steel cramps ( weight 260 grams ) with nuts, bolts and washer for dry stone cladding 451 telescopic drawer channels 300 mm long 452 stainless steel roller for sliding arrangement in racks / cupboards / cabinets shutter 453 50 mmx42 mmx2 mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish 454 25 mm thick factory made pvc flush door shutter i / c carriage 455 magnetic catcher triple strip vertical type 456 magnetic catcher double strip horizontal type 457 100 mm mortice lock with 6 levers for aluminium door 458 high polymer modified quickset tile adhesive 459 stainless steel wire guage ( grade 304 ) aperture 1.4 mm and 0.50mm dia wire 460 zinc alloy ( white powder coated ) touch lock withhook for upvc window / door 461 zinc alloy body with single nylon roller ( weight bearing capacity to be 40 kg ) for upvc sliding window 462 stainless steel ( ss 304 ) with adjustable double nylon roller ( weight bearing capacity to be 120 kg ) for upvc sliding door / window 463 zinc alloy ( white powder coated ) cresent lock for upvc sliding door / window 464 stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for upvc windows 465 stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for upvc windows 466 stainless steel friction hinges ( ss 304 grade ) size 300 x 19 x 1.9 mm for upvc window 467 stainless steel friction hinges ( ss 304 grade ) size 350 x 19 x 1.9 mm for upvc window 468 stainless steel friction hinges ( ss 304 grade ) size 400 x 19 x 1.9 mm for upvc window 469 wool pile / weather pile strip for upvc sliding window 470 aluminium grill as per is 1868 471 toughened glass 12 mm thickness 472 8 mm thick calcium silicate perforated tiles of size 595 x595 mm 473 8 mm thick marble tiles ( polished ) raj nagar 474 chromium plated brass curtain rod 12 mm dia 1.25mm thick 475 chromium plated brackets ( curtain rods ) 476 pvc cleeves for screws 477 chromium plated brass curtain rod 20 mm dia 1.25mm thick 478 chromium plated brass curtain rod 25 mm dia 1.25mm thick...

Building Construction Department - Jharkhand

26114075 tender for 1 brick 75a 2 cold twisted bars ( hysd bars ) average rate 3 corrosion resistant structural steel 4 paint 5 cement primer 6 primer 7 structural steel average rate 8 tiles size 300 x 300 mm and 25 mm thick 9 timber 10 water based cement paint 11 wooden ballies 2 dia for bracing 12 wooden ballies 8 dia and 9 m long ( 9 m @ rs. 43.00 / m ) 13 wooden packing 14 wooden staff for fastening of flag 25 mm dia, 1.0 m long 15 ( a ) 75b brick ( b ) fly ash lime bricks ( falg ) brick conforming to is 12894 1990 ( 9 x 4.5 x 3 ) 100 a at source ( c ) brick tiles ( 300mm x 150 mmx 50 mm ) ( d ) picket jhama brick ( e ) jhama khoa / metal ( f ) bangla bhattas brick of size 9 3 / 4 x 4 3 / 4 x 2 3 / 4 ( 248 mm x121 mm x 70 mm ) inclusive of royalty but exclusive of gst . ( 1 ) 75 b ( 2 ) jhama bricks note : in areas where bricks manufacture are of less size, the rate may be derived by reducing the rate in item [ 271 ( d ) & ( f ) ] in proportion of the bricks rounding to nearest rs. 5.00 16 bricks bats at kiln site 17 rough dressed stone boulder for masonry works. 18 seasonel sal wood scantling 19 sal planks : ( i ) 25 mm to 40 mm ( ii ) 12 mm to 20 mm 20 teak wood : ( i ) scantling ( ii ) planks 25 mm to 40 mm ( iii ) planks 12 mm to 20 mm 21 sisum wood ( i ) scantling ( ii ) planks 25 mm to 40 mm ( iii ) planks 12 mm to 20 mm 22 seasoned gamhar wood scantling ( local ) 23 local wood ( i ) scantling ( ii ) planks 25 mm to 40 mm ( iii ) planks 12 mm to 20 mm 24 bamboo ( i ) 75 mm dia 6 m long to 8 m long ( ii ) 100 mm dia 6 m long to 8 m long ( iii ) 50 mm dia hill bamboo 25 sal ballah post ( i ) 100 mm dia ( ii ) 125 mm dia ( iii ) 150 mm dia 26 butt hinges as per clause 562 of building specification of building construction deptt. of size. 26.01 ( i ) 75 mm 26.02 ( ii ) 100 mm 27 ( i ) teak ply 4 mm thick ( ii ) teak ply 6 mm thick 28 ply wood ( national or equivalant make ) ( i ) 25 mm thick ( ii ) 19 mm thick ( iii ) 12 mm thick ( iv ) 6 mm thick 29 orinary commercial ply ( i ) 3 mm thick ( ii ) 4 mm thick ( iii ) 6 mm thick 30 ( i ) sun mica best quality ( ii ) formica ( 1 mm ) 31 barbed wire of 4 point, 2 ply 12 swg, 150 mm apart 32 welded mesh ( 8 to 10 swg ) 100 to 125 mm square size 33 c.a. sheet ( i ) corrugated 6 mm thick 1.5 m to 3.05 m long. ( ii ) ( a ) plain 6 mm thick 2.4 m to 3.05 m long ( b ) plain 4 mm do ( iii ) c.a. ridge, valley 1 m long ( plain wing adjustable ) ( iv ) corrugated adjustable ridge 34 l drop 16 mm dia 300 mm long ( as per 5.6.5 of building specification of bcd ) with screw and all fittings. ( i ) aluminum ( ii ) iron ( copper oxidized ) 35 d handle iron, proper oxidized as per clause 5.6.7 of building specification of b.c.d. ( i ) 150 mm long ( ii ) 125 mm long ( iii ) 100 mm long 36 d handle made of 16 mm wide and 6 mm thick aluminum flat. ( i ) 150 mm long and 10 mm dia ( ii ) 100 mm long and 10 mm dia 37 aluminum pipe of 18 gauge ( i ) 12 mm dia ( ii ) 16 mm dia ( iii ) 20 mm dia 38 iron nails ( i ) 125 mm and below ( ii ) above 125 mm ( iii ) glass clip of wire 39 mild steel copper oxidized tower bolt as per clause 5.6.6 of building specification of b.c.d 10 mm dia, complete set. ( i ) 100 mm long ( ii ) 150 mm long ( iii ) 200 mm long ( iv ) 225 mm long ( v ) 300 mm long ( vi ) 450 mm long ( vii ) 600 mm long 40 aluminum tower bolt as per clause 5.6.6 of buillding specification of b.c.d. top quality, 10 mm dia ( i ) 100 mm long ( ii ) 120 mm long ( iii ) 150 mm long ( iv ) 200 mm long ( v ) 225 mm long ( vi ) 300 mm long 41 screw ( n.f ) ( i ) 75 mm size ( ii ) 60 mm size ( iii ) 50 mm size ( iv ) 40 mm size to 30 mm size ( v ) below 30 mm to 12 mm size 42 varnish standard make 43 sprit 44 ( i ) primer for wood work ( ii ) primer for steel work 45 shaliltex board ( for use as per expansion joint i.s. 1838 1938 filter ) ( i ) 25 mm thick ( ii ) 18 mm thick ( iii ) 12 mm thick 46 shalitex primer 47 double boiled llinseed oil 48 ( a ) aluminum paint standard make ( b ) synthetic enamel ( isi mark ) 49 plastic emulsion paint 50 dry distemper 51 oil bound distemper 52 snowcem powder 53 ( i ) cicko powder / inpermo waterproofing comp ) ( ii ) cicko liquid 54 robin blue 55 color for wash 56 whitening 57 putty 58 blackening powder 59 ( i ) 1st quality paint of different shades ( ii ) 2nd quality paint 60 wax polish ( 1 lit = 0.50 kg ) 61 french polish standard make 62 cotton 63 ram raj 64 shellex 65 narial coir string 66 narial rope 20 mm to 25 mm dia. 67 sutli 68 sabey string 69 cotton string 70 raniganj tiles 71 ridge for above 72 naria tiles 225 mm to 250 mm 73 ridge for above or mungra 74 narial rope above 25 mm dia 75 thatching grass in bundle ( consisting of small & average length of grass 2.75 m ) bundle 76 oxalic acid ( 1 lit. = 1 kg ) 77 iron clamp ( 460 mm x 40 mm x 6 mm ) 78 rolling shutter 1.02 mm thick 79 shalimar tarphelt bh ( type ii group 1 ) 80 ( a ) sun glass ( modi ) ( b ) plane glass panes ( i ) 2 mm thick ( ii ) 3 mm thick ( iii ) 4 mm thick ( iv ) 6 mm thick ( c ) pin hammered glass ( i ) 3 mm thick ( ii ) 4 mm thick ( iii ) 5 mm thick ( d ) 20 mm wide 4 mm thick glass strip for flooring 81 hessian cloth ( 0.3 kg / m2 cot. ) 82 gunny best quality 83 limpet washer 84 bitumen washer 85 plaster of peris 86 g.i. hook 150 mm to 10 mm dia 87 ( i ) 25 mm x 6 mm nuts & bolts ( ii ) 16 mm x 3.75 mm nuts & bolts ( iii ) 10 mm x 3.75 mm nuts & bolts 88 ( i ) fly proof wire netting ( 18 gauge wire with 12 16 nos, mesh per m2 ) ( ii ) fly proof wire netting ( light gauge ) 89 turpentine oil 90 manson polish 91 carborandum stones ( 4, 6, 8 & 10 nos ) 92 lime rubbish 93 slack coal grade c ( steam ) long flame 94 flush door ( hot pressed adhesive conforming to 2202 part 1 ) i.s. ( i ) 25 mm thick ( a ) both side commercial ( b ) one side teak ( c ) both side teak ( ii ) 32 mm thick ( a ) both side commercial ( b ) one side teak ( c ) both side teak ( iii ) 38 mm thick ( a ) both side commercial ( b ) one side teak ( c ) both side teak 95 ( a ) looking eye piece best quality 96 fevicol / ktcat / vamicol 97 boat spike ( 300 400 mm long ) 98 kotah stone tiles ( 15 mm 23 mm ) thick ( i ) 300 mm x 300 mm ( ii ) 375 mm x 375 mm ( iii ) 450 mm x 450 mm 99 white makrana marble stone 20 mm thick ( i ) 300 mm x 300 mm and below ( ii ) 300 mm x 600 mm and above 100 white glazed tiles 6 mm thick ( 150 x 150 mm size ) 101 commercial grade colour ceramic wall / floor tiles ( as per is 13712 ) ( i ) 150 mm x 150 mm ( ii ) 300 mm x 300mm ( iii ) 300 mm x 450mm ( iv ) 300mm x 600mm 102 dholpur tiles 15 mm x 23 mm thick ( i ) 275 mm x 275 mm to 300 mm x 600 mm ( ii ) 300 mm x 900 mm ( iii ) 600 mm x 1200 mm 103 mosaic / tarrazo tiles 20 mm thick in ordinary cement base. 104 mosaic / tarrazo tiles 20 mm thick in white cement base. 105 slacked stone lime 106 unslacked stone lime 107 colour pigment for cement : ( i ) red ( ii ) black ( iii ) green ( iv ) blue 108 marble dust ( daltonganj ) 109 marble chips ( i ) dehradoon ( ii ) daltanganj 110 marble chips coloured daltonganj 111 commercial particle board interior ( i ) 12 mm ( 600 mm x 600 mm ) size ( ii ) 25 mm ( 600 mm x 600 mm ) size 112 particle board exterior ( 600 mm x 600 mm size ) ( i ) 12 mm ( ii ) 25 mm 113 ( a ) 100 mm dia c.a. pipe ( b ) 100 mm dia c. bend 114 paint ( synthetic enamel ) 115 vitrified floor tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 15622 of approved make in all colours and shades.parking tiles ( industrial tiles ) 116 vitrified tiles tread of stairs of size 1200x300x15mm thick with water absorption less then 0.08% and conforming to is 15622of approved make in all colours and shades.size of tile 1200x300 mm for tread of stairs. 117 double charged vitrified floor tiles of size 600x600mm thick with water absorption less then 0.08% and conforming to is 15622 / iso 13006 of approved make in all colours and shades. 118 vitrified cool roof tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 154557 2007 / 1501 3006 of approved make in all colours and shades. 119 vitrified floor tiles of size 800x800mm with water absorption less then 0.08% and conforming to is 154557 2007 / 1501 3006 of approved make in all colours and shades. 120 vitrified floor tiles of size 1000x1000mm with water absorption less then 0.08% and conforming to is 154557 2007 / 1501 3006 of approved make in all colours and shades. 121 polysulphide ( poring grade ) ;density =1.65 gm / cc 122 polymer modified cementation coating 123 fibre glass cloth 124 chequered tiles cement concrete base 300x300x25mm 125 chequered tiles cement concrete base 300x300x40mm 126 brass screws 30 mm 127 plastic sleeves for screw 128 chromium plated brass screws 40 mm 129 chromium plated brass screws 30 mm 130 chromium plated brass screws 25 mm 131 chromium plated brass screws 20 mm 132 bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm 133 bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm 134 nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide 135 bright finished or black enameled mild steel screws 40 mm 136 bright finished or black enameled mild steel screws 25 mm 137 bright finished or black enameled mild steel screws 20 mm 138 bright finished or black enameled mild steel bolts and nuts 50x6 mm 139 oxidised mild steel butt hinges 125x65x2.12 mm 140 oxidised mild steel butt hinges 100x58x1.90 mm 141 oxidised mild steel butt hinges 75x47x1.70 mm 142 oxidised mild steel butt hinges 50x37x1.50 mm 143 oxidised mild steel parliamentary hinges 150x125x27x2.8 mm 144 oxidised mild steel parliamentary hinges 125x125x27x2.8 mm 145 oxidised mild steel parliamentary hinges 100x125x27x2.8 mm 146 oxidised mild steel parliamentary hinges 75x100x20x2.24 mm 147 oxidised mild steel sliding door bolt 300x16 mm 148 oxidised mild steel sliding door bolt 250x16 mm 149 oxidised mild steel tower bolt ( barrel type ) 250x10 mm 150 oxidised mild steel tower bolt ( barrel type ) 200x10 mm 151 oxidised mild steel tower bolt ( barrel type ) 150x10 mm 152 oxidised mild steel tower bolt ( barrel type ) 100x10 mm 153 oxidised mild steel handles 125 mm 154 oxidised mild steel handles 100 mm 155 oxidised mild steel handles 75 mm 156 oxidised mild steel screws 50 mm 157 oxidised mild steel screws 40 mm 158 oxidised mild steel screws 30 mm 159 oxidised mild steel screws 25 mm 160 oxidised mild steel screws 20 mm 161 anodised aluminium butt hinges 100x75x4 mm 162 anodised aluminium butt hinges 75x45x3.2 mm 163 anodised aluminium sliding door bolt 300x16 mm 164 anodised aluminium sliding door bolt 250x16 mm 165 anodised aluminium tower bolt ( barrel type ) 300x10 mm 166 anodised aluminium tower bolt ( barrel type ) 250x10 mm 167 anodised aluminium tower bolt ( barrel type ) 200x10 mm 168 anodised aluminium tower bolt ( barrel type ) 150x10 mm 169 anodised aluminium tower bolt ( barrel type ) 100x10 mm 170 anodised aluminium handles 125 mm with plate 175 x 32 mm 171 anodised aluminium handles 100 mm with plate 150 x 32 mm 172 anodised aluminium handles 75mm with plate 125 x 32 mm 173 anodised aluminium kicking plate 50 cm long 100x3.15 mm 174 exterior primer 175 black japan paint 176 superior copal varnish 177 oil type wood preservative 178 putty for wood work 179 plug 180 black colour dark shade pigment 181 red, chocolate, orange, buff or yellow ( red oxide of iron ) light shade pigment 182 green or blue medium shade pigment 183 ball bearing for rolling shutters 184 galvanised steel plain sheets 185 mild steel round bar 12 mm dia and below 186 structural steel such as tees, angles channels and r.s. joists 187 flats up to 10 mm in thickness 188 flats exceeding 10 mm in thickness 189 mild steel rivets 190 galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots 191 bolts and nuts up to 300 mm in length 192 bolts and nuts above 300 mm in length 193 superior class teak wood such as dandeli, balarshah or malabar in planks 194 first class teak wood in planks 195 second class teak wood in planks 196 second class deodar wood in planks 197 sal wood in scantling 198 precast heat resistant terrace tiles ( size 300x300 mm ) and 20 mm thick 199 g.i. plain washer thick 200 water proofing materials 201 welding by electric plant 202 20 mm dia holding down bolts 203 steel weld mesh 204 18 mm thick flamed finish granite stone slab 205 18 mm thick italian marble stone slab, perlato ( slab area up to 0.5 sqm ) . 206 commercial lpg in cylinder 207 surface box for stop cock 208 8 mm dia c.p. brass / s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c. 209 vitreous china pedestal for wash basin 210 flush pipe with union spreaders and clamps all in c.p. brass for single stall 211 flush pipe with union spreaders and clamps all in c.p. brass for double stall 212 stoneware pipes grade a ( 60 cm long ) 100 mm dia 213 white plastic seat ( solid ) with lid c.p. brass hinges and rubber buffers 214 black plastic seat ( solid ) with lid c.p. brass hinges and rubber buffers 215 c.i. trap for standard urinal with vent arm with operating and other couplings in c.p. brass: 50 mm dia 216 float glass panes of nominal thickness 4 mm ( weight not less than 10 kg / sqm ) 217 float glass panes of nominal thickness 5 mm ( weight not less than 12.50 kg / sqm ) 218 float glass panes of nominal thickness 8 mm ( weight not less than 20.00 kg / sqm ) 219 anodised aluminium hanging type door stopper 220 anodised aluminium pull bolt lock ( locking bolt ) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete 221 anodised aluminium casement stay 250 mm 222 pre laminated both side solid foam upvc profile ( 45x20mm ) 223 solid foam upvc sheet 20mm thick pre laminated on both side 224 pvc edge beading 225 expandable fastner with plastic sleeve 226 weather / structural non sag elastomeric pu sealant ( 600ml sausage ) for joints in rcc / brick / stone / wood / ceramic / gypsum / alluminium work complying to astm c920, din 18540 f & iso 11600 incl all taxes 227 structural sealant 6 mm x 12 mm 228 spacer tape 6.4 mm thick x 6 mm wide 229 weather sealant non staining ( 600 ml ) 230 weather sealant normal ( 300 ml ) 231 ms brackets / aluminium alloy brackets 232 silicon gasket in kg ( above 50 g / m ) 233 epdm gasket in kg ( above 60 g / m ) 234 anchor fastner m10 235 ss bolt with washer of different sizes for structural glazing / acp cladding 236 ss screws of sizes for structural glazing / acp cladding 237 protective tape 238 gi flashing 1.2 mm thick 239 6 mm thick high performance glass 240 6 mm thick clear heat strengthened glass 241 6 mm thick clear heat strengthened glass 242 arms gs hd top hung 20 type p couple 243 connection block for vision glass panel 244 curtain wall striker for vision glass panel 245 adjustable fastening pawl for vision glass panel 246 corner drive for vision glass panel 247 top wedge block for vision glass panel 248 baker rod 249 fire stop 250 600x120 mm glass shelf with anodised aluminium angle frame, c.p. brass brackets and guard rail of standard size 251 galvanized iron ( 1.6 ± 0.2 mm ) thick reinforcement for big series casement window / door frame, sash, mullion, big & small series sliding window frame 252 galvanized iron ( 1.6 ± 0.2 mm ) thick reinforcement for big series sliding window / door sash 253 g.i fasteners 100 x 8 mm 254 stainless steel ( grade 304 ) hollow section round / square tubes 255 stainless steel bolts / square bar and plates 256 pressed steel door frames ( mild steel sheet 1.60 mm ) profile b 257 pressed steel door frames ( mild steel sheet 1.60 mm ) profile c 258 pressed steel door frames ( mild steel sheet 1.60 mm ) profile e 259 mild steel tubes hot finished welded type 260 mild steel tubes hot finished seamless type 261 mild steel tubes electric resistant or induction butt welded 262 circular c.i. box for ceiling fan internal dia 140 mm, 73 mm height, toplid of 1.5mm thick ms sheet 263 red oxide zinc chromate primer 264 brass 100mm mortice latch and lock with 6 levers without pair of handles 265 pair of anodised aluminium lever handles for 100 mm mortice latch and lock 266 12.5 mm thick tapered edge plain gypsum plaster borad confirming to is 2095 ( part i ) : 2011 267 galvanised steel ceiling section ( size 80x26x0.50 mm ) 268 galvanised steel perimetre channel ( size 20x27x30x0.50 mm ) 269 galvanised steel intermediate channel ( size 15x45x15x0.90 mm ) 270 galvanised steel angle hanger ( celling angle ) ( size 25x10x0.50 mm ) 271 galvanised steel connecting clips ( 2.64 mm dia and 230 mm long gi wire ) 272 galvanised steel soffit cleat ( size 27x37x25x0.60 mm ) 273 joint filler 274 joint finisher 275 joint tape roll 276 all drive screws ( for gypsum board ) 277 primer ( for gypsum board ) 278 chlorpyriphos 20% e.c. / lindane 20% e.c. 279 acid proof cement 280 self tapping pan head nickel coated mild steel screws of size 13 x3.2 mm 281 fibre joint tape 50 mm wide ( 90 metre ) roll 282 12.5 mm thick fully perforated gypsum board 283 galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm 284 12.5 mm thick tapered edge moisture resistant plain gypsum plaster board confirming to is 2095 ( part i ) : 2011 285 nickel plated m.s. pipe 25 mm dia 286 nickel plated m.s. pipe 20 mm dia 287 nickel plated m.s. brackets for curtain rod 20 mm 288 nickel plated m.s brackets for curtain rod 25 mm 289 oxidised mild steel screws 35 mm 290 rawl plug 50 mm ( designation 10 nos ) 291 aluminium tee channel ( heavy duty ) with rollers and stop end 292 aluminium hanging floor door stopper with twin rubber & stopper 293 hydraulic door closer tubular type aluminium section body 294 chequered precast cement concrete tiles 22 mm thick using marble chips of size 6mm light shade using white cement 295 acid and alkali resistant tiles 300x300 mm size, 10 mm thick 296 stainless steel kitchen sink with drain board 510 x 1040 mm bowl depth 200 mm 297 stainless steel kitchen sink without drain board 610x510 mm bowl depth 200 mm 298 coloured ( other than black ) solid p.v.c. seat in european w.c. pan 299 circular shape 450 mm dia mirror with plastic moulded frame 300 rectangular shape 453x357 mm mirror with plastic moulded frame 301 oval shape 450x350 mm ( outer dimensions ) mirror with plastic moulded frame 302 rectangular shape 1500x450 mm mirror with plastic moulded frame 303 hard board 6 mm thick 304 flexible ( coil shaped ) pvc waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i / c pvc waste fittings 305 flexible ( coil shaped ) pvc waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i / c pvc waste fittings 306 u pvc pipes ( working pressure 4 kg / cm² ) single socketed pipe 75 mm dia 307 u pvc pipes ( working pressure 4 kg / cm² ) single socketed pipe 110 mm dia 308 u pvc pipes ( working pressure 4 kg / cm² ) rubber ( seal ) ring 75 mm dia 309 u pvc pipes ( working pressure 4 kg / cm² ) rubber ( seal ) ring 110 mm dia 310 upvc coupler for upvc drainage pipes 75 mm 311 upvc coupler for upvc drainage pipes 110 mm 312 upvc pushfit coupler ( single ) 75 mm thick 313 upvc pushfit coupler ( single ) 110 mm thick 314 upvc single equal tee ( without door ) 75x75x75 mm 315 upvc single equal tee ( without door ) 110x110x110 mm 316 upvc single equal tee ( with door ) 75x75x75 mm 317 upvc single equal tee ( with door ) 110x110x110 mm 318 upvc bend 87.5° 75 mm bend 319 upvc bend 87.5° 110 mm bend 320 upvc plain shoe 75 mm bend 321 upvc plain shoe 110 mm bend 322 upvc pipe clip 75 mm bend 323 upvc pipe clip 110 mm bend 324 precast chequered cement tiles 22 mm thick dark shade using ordinary cement 325 precast chequered cement tiles 22 mm thick medium shade using 50% white cement 50% ordinary cement 326 epoxy paint 327 melamine polish 328 table rubbed polished stone 18mm thick ( 75x50cm ) granite stone 18 mm thick 329 pressed clay tiles 20mm thick 250x250 mm size 330 glass wool 50 mm thick 331 granite of any colour, 18 mm thick ( slab area above 0.50 sqm ) 332 aluminium t or l sections 333 double coupler 334 12 mm m.s. u beading 335 p.v.c. automatic flushing cistern 5 litre capacity 336 glass reinforced gypsum ( grg ) plaster board 12.5 mm thick confirming to is 2095 ( part 3 ) : 1996 337 galvanised m.s. sheet 0.5 mm thick pressed channel section of size 50x32 mm 338 galvanised m.s. sheet 0.50 mm thick pressed stud : 48x34x36 mm 339 white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556 340 12 mm dia 50 mm long wedge type expanded zinc alloy dash fastener 341 spigot for standard jointing 342 dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt 343 anodising 15 microns on aluminium sections 344 epdm gasket for upvc window / door 345 anodising 25 microns on aluminium sections 346 powder coating 50 microns on aluminium sections 347 polyester powder coating 50 microns on aluminium sections 348 double action hydraulic floor spring with stainless steel cover plate 349 6 mm dia g.i. adjustable hangers including clips ( up to 1.2 m length ) 350 double action hydraulic floor spring with brass cover plate 351 base jack 352 challies 353 cup locks 354 prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded ( medium density ) grade i, type ii conforming to is : 12823 ( exterior grade ) 12 mm thick 355 prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded ( medium density ) grade i, type ii conforming to is : 12823 ( exterior grade ) 12 mm thick 356 pvc blind pipe 150 mm dia as per is: 12818 357 pvc blind pipe 200 mm dia as per is: 12818 358 pvc slotted pipe 150 mm dia as per is: 12818 359 pvc slotted pipe 200 mm dia as per is: 12818 360 upvc blind pipe 100 mm dia as per is: 12818 361 upvc slotted pipe 100 mm dia as per is: 12818 362 epoxy 363 sbr polymer 364 acrylic polymer chemical for cracks 365 24 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish 366 30 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish 367 48mmx40mmx1.5mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish 368 upvc extruded ( small series ) casement window frame size 47x50mm 369 upvc extruded ( small series ) casement window sash / window mullion size 47x68 mm 370 upvc extruded glazing bead of appropriate dimension for small series casement window sash 371 upvc extruded glazing bead of appropriate dimension for big series of sliding window / door sash 372 upvc extruded ( big series ) 3 track sliding window / door frame size 116x45mm 373 upvc extruded ( small series ) 2 track sliding window sash / 3 track sliding window sash size 32x60mm 374 upvc extruded ( big series ) 2 track sliding window sash size 46x62mm 375 upvc extruded ( big series ) 3 track sliding window sash size 46x62mm 376 upvc extruded interlock of appropriate dimension for small series sliding window sash 377 upvc extruded interlock of appropriate dimension for big series sliding window / door sash 378 upvc extruded inline adaptor of appropriate dimension for big series sliding window / door sash 379 upvc extruded 2 track sliding door sash / 3 track sliding door sash ( big series ) size 46x82mm 380 a.p.p. modified 3 mm thick membrane reinforced with polyester matt 381 bitumen primer for bitumen membrane 382 geotextile 120 grams per sqm membrane 383 stainless steel screws 50 mm 384 stainless steel screws 40 mm 385 concealed zinc coated hinges 19 20 mm thick with mounting plate 386 acrylic exterior paint 387 premium acrylic exterior paint 388 textured exterior paint 389 galavanised ms 8 mm outer diameter m 6 dash fastener 50mm long 390 g.i main runner 15 x32 mm of 3000 mm length, 0.33 mm thick 391 g.i cross t 15 x32 mm of 1200 mm length, 0.33 mm thick 392 15 mm thick, light weight, integral densified micro look edged, false ceiling tiles of size 595x595 mm. 393 15 mm thick, light weight, fully perforated square / butt edge integral densified, false ceiling tiles of size 595x595 mm. 394 powder coated steel section main t ceiling sections 15x42x0.40 mm ( 3000 mm long ) 395 galvanized mild steel perimeter wall angle 22x19x0.40 mm ( 3000mm long ) 396 powder coated galvanised iron intermediate cross t section 15x42x0.40 mm ( 1200 mm long ) 397 powder coated galvanized iron intermediate cross t section 15x42x 0.40mm ( 600 mm long ) 398 12 mm thick micro tegular edged semi perforated grg ( glass fibre reinforced gypsum ) false celing tiles of size 595x595 mm 399 12 mm thick micro tegular edged fully perforated grg ( glass fibre reinforced gypsum ) false celing tiles of size 595x595 mm 400 galvanized iron intermediate cross t section 15x32x0.33 mm ( 600mm long ) 401 galavanised ms hanger rod 6mm dia ms fully threaded up to 1000mm length 402 calcium silicate tegular edged celling tiles 595x595 mm and 15 mm thick on edges 403 galvanised steel main tee ceiling section size 24x38x0.33 mm ( 3 metre long ) 404 galvanised steel perimeter wall angle size 24 x 24 x 0.40 mm ( 3.00 metre long ) 405 galvanised steel intermediate cross t section size 24 x 25 x 0.33mm ( 1.2 metre long ) 406 galvanised steel intermediate cross t section size 24 x 25 x 0.33mm ( 0.6 metre long ) 407 galvanised ms 8mm outer diameter m 6 dash fastener 25mm long 408 gi metal tile lay in plain tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick 409 gi metal tile lay in perforated tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick 410 pvc laminated gypsum tiles ( square edge ) of size 595x595 mm and 12.5 mm thick 411 gypsum tiles fully perforated square edge of size 595x595 mm and 12.5 mm thick 412 main t ceiling sections 24x38x0.3 mm ( 3 metre long ) 413 perimeter wall angle 24 x 24 x 0.3 mm ( 3 metre long ) 414 intermediate cross t section 24x25x0.3 mm ( 1.2 m long ) 415 intermediate cross t section 24x25x0.3 mm ( 0.6 m long ) 416 hanger rod 4 mm thick 417 adjustment clip 85x30x0.8 mm 418 soffit cleat ( size 27x37x25x1.60 mm ) 419 galavanised ms l shape level adjuster of size 85x25x2 mm 420 vitrified floor tile 50x50 cm conforming to is 15622:2006 group ( b1a ) 421 border tiles 200x75mm size 422 chlorinated polyvinyl chloride ( cpvc ) pipe 15 mm outer dia 423 chlorinated polyvinyl chloride ( cpvc ) pipe 20 mm outer dia 424 chlorinated polyvinyl chloride ( cpvc ) pipe 25 mm outer dia 425 chlorinated polyvinyl chloride ( cpvc ) pipe 32 mm outer dia 426 chlorinated polyvinyl chloride ( cpvc ) pipe 40 mm outer dia 427 chlorinated polyvinyl chloride ( cpvc ) pipe 50 mm outer dia 428 chlorinated polyvinyl chloride ( cpvc ) pipe 62.5 mm inner dia 429 chlorinated polyvinyl chloride ( cpvc ) pipe 75 mm inner dia 430 chlorinated polyvinyl chloride ( cpvc ) pipe 100 mm inner dia 431 chlorinated polyvinyl chloride ( cpvc ) pipe 150 mm inner dia 432 weather silicon sealant 433 stainless steel screws 30 mm x4 mm 434 masking tape 435 autoclaved aerated cement ( aac ) blocks 436 aluminium casement window fastener ( anodised ac 15 ) 437 aluminium casement window fastener ( powder coated ) 438 aluminium casement window fastener ( polyester powder coated ) 439 stainless steel screws 25 mm x4 mm 440 precoated galvanised iron profile sheet 0.50 mm tct 441 precoated galvanised steel plain ridges 0.50 mm tct and 500 600mm wide 442 precast c.c. kerb stone m 25 443 interlocking c.c. paver block ( 60 mm thick, m 30 ) 444 punched tape concertina coil 600 mm dia 10 m openable length ( total length 90 m ) 445 rbt reinforced barbed wire 446 turn buckle and strengthening bolt 447 chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm 448 chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm, pvc coated to outer dia 5 mm 449 chain link fabric fencing mesh of size 25x25 mm made of g.i. wire of dia 3 mm 450 stainless steel cramps ( weight 260 grams ) with nuts, bolts and washer for dry stone cladding 451 telescopic drawer channels 300 mm long 452 stainless steel roller for sliding arrangement in racks / cupboards / cabinets shutter 453 50 mmx42 mmx2 mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish 454 25 mm thick factory made pvc flush door shutter i / c carriage 455 magnetic catcher triple strip vertical type 456 magnetic catcher double strip horizontal type 457 100 mm mortice lock with 6 levers for aluminium door 458 high polymer modified quickset tile adhesive 459 stainless steel wire guage ( grade 304 ) aperture 1.4 mm and 0.50mm dia wire 460 zinc alloy ( white powder coated ) touch lock withhook for upvc window / door 461 zinc alloy body with single nylon roller ( weight bearing capacity to be 40 kg ) for upvc sliding window 462 stainless steel ( ss 304 ) with adjustable double nylon roller ( weight bearing capacity to be 120 kg ) for upvc sliding door / window 463 zinc alloy ( white powder coated ) cresent lock for upvc sliding door / window 464 stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for upvc windows 465 stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for upvc windows 466 stainless steel friction hinges ( ss 304 grade ) size 300 x 19 x 1.9 mm for upvc window 467 stainless steel friction hinges ( ss 304 grade ) size 350 x 19 x 1.9 mm for upvc window 468 stainless steel friction hinges ( ss 304 grade ) size 400 x 19 x 1.9 mm for upvc window 469 wool pile / weather pile strip for upvc sliding window 470 aluminium grill as per is 1868 471 toughened glass 12 mm thickness 472 8 mm thick calcium silicate perforated tiles of size 595 x595 mm 473 8 mm thick marble tiles ( polished ) raj nagar 474 chromium plated brass curtain rod 12 mm dia 1.25mm thick 475 chromium plated brackets ( curtain rods ) 476 pvc cleeves for screws 477 chromium plated brass curtain rod 20 mm dia 1.25mm thick 478 chromium plated brass curtain rod 25 mm dia 1.25mm thick...

South Eastern Railways - Jharkhand

25491738 supply of , light weight prefabricated water proof synthetic tent. specification 1) material of the synthetic tent must be water proof nylon/parachute cloth with double layer. 2) size of the tent: 16ft x 10ft x 8ft x 6ft (l x b x h x wall), 3) minimum weight of tent along with accessories: 30kg. 4) colour: navy blue. 5) structure & support: heavy gauge aluminum pipe of 30mm dia, for main structure and for side supports, aluminum pipe of 25mm dia & nylon ropes with pegs. 6) doors: 02nos. with net and must be operated by heavy duty zipper chain. 7) window: 04nos. with net and must be operated by velcro. 8) ground sheet: must be of heavy duty water proof hdpe sheet of 16 feet x 10 feet (l x b) size. 9) accessories: there must be m.s. peg & 02 no. hammer of 1.5 kg with wooden handle supplied with the tent for erection of the tent. 10) packing: the unit must be packed in roll luggage bag for easy handling. make: prabha or equivalent....

Hindustan Petroleum Corporation Limited - Jharkhand

24032177 providing sop instructions boards as per following specifications: board material: aluminum composite panel ( acp ) 3mm thick; uv printed acp with lamination. frame: l aluminum pipe powder coated frame of 30mm width ( blue ) letter size: 1.5....

Jharkhand Bijli Vitran Nigam Limited - Jharkhand

23753708 supply of 1 gi earthing pipe 3.1 meter long (40 mm dia) 2 aluminium pipe 40 mm dia 3 earthingg.i.strip for (65x6) 4 earthing (chemical) with gi earthing pipe 40 mm 3.1 mtrs. long (bentonite as intermittent layers) 5 earthing (chemical) with gi earthing pipe 20 mm 2.5 mtrs. long 6 earth clamp for earthwire (50 x 6 mm)[galvanized]...

Jharkhand State Electricity Board - Jharkhand

23745057 supply of electric line materials under om head 2019 20 , aluminium pipe 40 mm dia , connector pipe to panther , connector panther to panther , connector panther to ab switch , connector pipe to ab switch , connector dog to ab switch , jointing sleeve for panther , jointing sleeve for wolf , jointing sleeve for dog , jointing sleeve for rabbit , p g clamp for 150 sq mm conductor , p g clamp for 100 sq mm conductor , p g clamp for 70 sq mm conductor , earth clamp for earth wire ( 50x6mm ) galvanised...

Jharkhand State Electricity Board - Jharkhand

23729232 supply of earthing related materials , electrical items : , gi earthing pipe 3 . 1 meter long ( 40 mm dia ) , aluminium pipe 40 mm dia , earthing g . i . strip for ( 65x6 ) , earthing ( chemical ) with gi earthing pipe 40 mm 3 . 1 mtrs . long ( bentonite as intermittent layers ) , earthing ( chemical ) with gi earthing pipe 20 mm 2 . 5 mtrs . long , earth clamp for earthwire ( 50 x 6 mm ) [ galvanized ] ...

South Eastern Railways - Jharkhand

23440375 supply and fixing of acp board containing stainless steel letter. as per enclosed annexure a 01 set consisting 03 items. a ) acp board with alluminium pipe frame size 12feet x 4feet outdoor led light , 30 watt capacity for lighting of board 03 nos, qnty 01 no. b ) acp board, size 4feet x 1.5 feet, qnty 01 no. c ) acp board size 4feetx2feet qnty 01 no. note: drawing & specification of item a, b & c. mentioned in annexure a...

Jharkhand State Electricity Board - Jharkhand

22262133 procurement of fabrication materials : aluminium pipe 40 mm dia , earthing g . i strip for ( 65x6 ) , support clamp for v cross arm for 60 kg rail pole ( galvanized ) , 11 kv support clamp for v cross arm for 9 mtrs . 400 kg psc pole ( galvanized ) , pg clamp for 232 / 150sq . mm conductor , d . p channel support clamp ( 50x6 ) for 60 kg rail pole ( galvanized ) , 33 kv cross bracing for d . p structure ( galvanized ) , bracing set of 2 pair for 60 kg rail pole ( galvanized ) , 33 kv d . p channel ( 100x50x6mm ) 1 . 3 mater long ( galvanized ) , d . p channel support clamp ( 50x6 ) for 9 mtrs . 400 kg psc pole ( galvanized ) , 33 kv angle / side stay clamp ( 50x6mm ) for 60 kg rail pole ( galvanized ) , back clamp ( 50x8mm ) for top bracket ( galvanized ) for 60 kg rail pole , transformer belting ( 50x50x6mm ) & belting support ( 40x40x6 mm ) ( galvanized ) , 33 kv pole top bracket 50x10mm flat ( galvanized ) , 33 kv v cross arm ( 100x50x6mm ) ( galvanized ) ...

Heavy Engineering Corporation Limited - Jharkhand

22219819 supply of hex pipenut rp 3/8 is:3468 75 phosphated barrel nipple 1/4 x 35, 006.057 seamless barrel nipple working press 200kg/cm2 1/4 x 60 , phosphated taper pipe thread seamless barrel nipple working press 200kg/cm2 3/8 x 40,phosphated taper pipe thread seamless barrel nipple working press 200kg/cm2 3/8 x 75,phosphated taper pipe thread taper plug r 3/8 ,pc006.058 1 taper plug r 1/4,is:12116.p1, 006.058 elbow p 3/8 tr ,006.054 elbow p 1/4 tr tee p 3/8 tr .006.055 socket p 1/4 tr. ,006.056 socket p 2 tr., pc 006.056 socket p 1 tr., pc 006.056 hex. nipple p 1/4 tr,006.051 nipple 20 hex nipple p 3/8 tr x p1/4 tr ,006.052 hex nipple p 3/8 tr galvanised,pc 006.051 hex nipple equal nb size 1/8 is: 1879(part vii) 75 plain plug 1/4 tr ,ps 006.058 plain plug 3/8 tr, 006.058 plain plug p1/2 tr, 006.058 plain plug p3/4 t,r 006.058 plain plug p1.1/2 tr, 006.058 plain plug t8 size 3/4 is:1879(part ix) 75 bushing p 1/2 tr x p 1/4 tr,006.053 bushing p 1/2 tr x p 3/8 tr,006.053 bushing p 3/4 tr x p 3/8 tr,phosphated,ps006.053 bushing p ¾” tr x ½” tr, 006.053 straight fittings g 20 ps of ermeto or equivalent elbow fitting w 20 ps of ermeto or equivalent equal tee t20 p.s of ermeto or equivalent straight male stud fitting ge 10 plr of ermeto or eqvt. straight male stud fitting ge 12 psrof ermeto male stud elbow we 6 psro of ermeto or eqvt. male stud elbow we 10 plr of ermeto or eqvt. reducing stand pipe kor 20/12 ps od ermeto or eqvt. heavy duty polyamide clamp for pipe od 20 part no. pch 20 of hyd. air or eqvt. bracket 18 009.819 1,is:226 75 straight female stud fitting gai 10 plr ermeto or eqvt. straight female stud fitting ga i20 psr of ermeto or eqvt. male female reducing adopter 1/8” bsp (m) x 3/8”bsp(f) ermeto part no. ri 1/8 x 3/8 or eqvt straight male stud fitting ge 10 plr of ermeto or eqvt. male stud coupling 1/8” x 6mm od tube of ermeto part no.ri 1/8 x 3/8 heavy duty polypropolene clamp for pipe od 12mm part no.pch i 12 of hyd. air forged steel elbow 3/8” bspt as per ansi b16 11 pressure class 3000 psi mat. astma 105 ,gr.2,ansi b16.11 elbow p ½” tr, 006.054 socket p ¾” tr ,006.056 socket p 1.1/2” tr ,006.056 union rc ½” ,006.059 1 plain plug 3/4 bsp bs:1740 hex nipple p ½” tr x 3/8” tr ,006.052 hex nipple p ¾” tr x p ½” tr ,006.052 hex. nipple p 3/8 tr ,006.051 pipe clamp 20,009.810 2 pipe clamp 80,009.810 2 pipe clamp 17,009.811 taper plug r ½ tr is:12116 87,pc 006.058 1 ferule for pipe od 10mm ermeto part no. dpr 10l/s or eqvt. ferule for pipe od 12mm of ermeto part no. dpr 12 l/s or eqvt. ferule for pipe od 20mm ermeto part no. dpr 20 s or eqvt ferule for pipe od 6mm ermeto part no. dpr 6l/ s or eqvt adopter ¼” bspt/m 16x1.5 equal tee t 12 ps of ermeto or eqvt. socket p 3/8 tr, ps .006.056 union rc 1/4”tr ,006.059 1 union rc 3/8”,006.059 1 union p 3/8 tr,006.059 button head grease nipple m 16 x15,043.801 socket m2 reducing size 3/8 x 1/8 is: 1879 (part vi) 75 back nut p4 size 1.1/2 is: 1879(part viii) 75 bracket 18 009.819 1,is:226 75 pipe clamp ri spal 60508 ul ( heavy duty, rubber inserted polyamide ul pipe clamp, od 50.8 spal 60508) pipe clamp al od 30, spal 5030 (heavy duty aluminium pipe calmp, od=30, spal 5030 pipe calmp alod = 28, spal 4028 ( (heavy duty aluminium pipe calmp, od=28, spal 4028 or eqvt. clamp ri spal 7070 ul (heavy duty, rubber inserted, polyamide ul pipe clamp od 70 spal 7070 pipe clamp al od 38, spal 6038 (heavy duty aluminium pipe calmp, od=38, spal 6038 or eqvt. elbow fitting w 12 ps ermeto or equal seamless barrel nipple p 3/4 tr x 80 working pressure 200 kg/cm2 phosphated...

Jharkhand State Electricity Board - Jharkhand

19792479 procurement of electrical line materials under adp head, nit 390 / pr / jbvnl / 18 19=> open tender = connector panther to panther connector pipe to dog connector pipe to ab switch connector pipe to panther connector dog to ab switch aluminum pipe connector aluminum pipe 40mm dia...

Central Coalfields Limited - Jharkhand

18667886 re organization of bus bar arrangement by rigid alloy alluminium pipe with heightening at the place of incoming and outgoing feeders switches inter connection at main substation of jocp....

Rural Development Department - Jharkhand

18426934 tender for hardware partition, refurbishment, electrification and repair & maintenance of office premises for making partition of limited space (approximately 2500 running sq. ft.) aluminium pipes , acp (silver) , clear glass...

Rural Development Department - Jharkhand

18379982 tender for aluminum partion and refurbishment work for creating comfortable workstation of 25 30 persons at jslps dmmu office ranchi: 1 aluminium pipes, 2 acp (silver) , 3 clear glass...

Jharkhand State Electricity Board - Jharkhand

15948987 supply of electric line materials 1 route & joint indicating 2 aluminium pipe 40 mm dia 3 aluminium pipe connector 4 415v ac power distibution board 5 30v dc distribution board 6 earthing g.i. strip for (65x6) 7 rubber mat along length of pannel ...

Information And Public Relation Department - Jharkhand

15903199 supply of electric line material 1 route & joint indicating : 2 aluminum pipe 40 mm dia 3 aluminum pipe connector : : 4 41 5v ac power distribution board 5 30v dc distribution board 6 earthing g.i. strip for (65x6) 7 rubber mat along length of pannel....

Jharkhand State Electricity Board - Jharkhand

15340018 supply of electric line materials, 417 / pr / jbvnl / 2017 18 1 route & joint indicating 2 aluminium pipe 40 mm dia 3 aluminium pipe connector 4 415v ac power distibution board 5 30v dc distribution board 6 earthing g.i. strip for (65x6) 7 rubber mat along length of pannel...

Jharkhand State Electricity Board - Jharkhand

15339756 supply of electric line materials, 430 / pr / jbvnl / 2017 18 1. alluminum binding wire 2. alluminum pipe connector 3. aluminium tape 4. gi wire 5. insulation piercing connector brancing suitable to t joint 6. insulation piercing connector for db charging 7. lt stay insulator 8. pre insulated mid span joint suitable ...

Jharkhand Bijli Vitran Nigam Limited - Jharkhand

15319952 supply of the materials aluminium binding wire, aluminium pipe connector , aluminium tape, gi wire no 10 f or earthing, insulation piercing connector branching suitable to t joint, insulation piercing connector for db charging, lt stay insulator, pre insulated mid span joint suitable 70 mm2 phase...

Jharkhand Bijli Vitran Nigam Limited - Jharkhand

15269452 supply of gi wire 8, route and joint indicating aluminum pipe 40 mm dia aluminum pipe corrector, ear thing gui strip for (65x6, battery charging unit complete with battery 8o ah 3o v , 4oo watt 250 v ihips’v lamp fitting complete kr 33/11 kv pss yard lighting...

Jharkhand Bijli Vitran Nigam Limited - Jharkhand

15062392 supply of electric line materials 1 p g clamp for 80 sq.mm 2 aluminium pipe 40 mm dia 3 aluminium pipe connector 4 p g clamp for 150 sq mm conductor 5 p g clamp for 100 sq mm conductor 6 piercing connector for lt ab cable...

Jharkhand State Electricity Board - Jharkhand

13570512 tender for supply of materials / equipments / items: 1 gi pipe 6 dia light duty hdpe hume pipe ( c class ) 2 aluminium pipe 40 mm dia 3 aluminium pipe connector ( pipe to ab switch ) 4 earthing g.i strip for ( 65x6mm ) 5 aluminium binding wire 6 gi wire no. 08 swg 7 ms nuts & bolts of different size 8 aluminium tape 9 g i stay wire no. 7 / 10 swg 10 gi stay wire no. 7 / 12, 7 / 14, 7 / 16 11 gi pipe 4 heavy ( c class ) 12 anticlimbing device ( barbed wire ) 13 ms flat ( 75x40x6mm ) ( galvanized ) 14 earth clamp for earth wire ( 50x6mm ) ( galvanized )...